-
The influence of an outer bath on the dewetting of an ultrathin liquid film
Authors:
A. Martinez-Calvo,
D. Moreno-Boza,
J. F. Guil-Pedrosa,
A. Sevilla
Abstract:
We report a theoretical and numerical investigation of the linear and nonlinear dynamics of a thin liquid film of viscosity $μ$ sandwiched between a solid substrate and an unbounded liquid bath of viscosity $λμ$. In the limit of negligible inertia, the flow depends on two non-dimensional parameters, namely $λ$ and a dimensionless measure of the relative strengths of the stabilizing surface tension…
▽ More
We report a theoretical and numerical investigation of the linear and nonlinear dynamics of a thin liquid film of viscosity $μ$ sandwiched between a solid substrate and an unbounded liquid bath of viscosity $λμ$. In the limit of negligible inertia, the flow depends on two non-dimensional parameters, namely $λ$ and a dimensionless measure of the relative strengths of the stabilizing surface tension force and the destabilizing van der Waals force between the substrate and the film. We first analyze the linear stability of the film, providing an analytical dispersion relation. When the viscosity of the outer bath is much larger than that of the film, $λ\gg 1$, the most amplified wavenumber decreases as $k_{\textrm{m}} \sim λ^{-1/3}$, indicating that very slender dewetting structures are expected when $λ$ becomes large. We then perform fully nonlinear simulations of the complete Stokes equations to investigate the spatial structure of the flow close to rupture revealing that the flow becomes self-similar with the minimum film thickness scaling as $h_{min} = K(λ) τ^{1/3}$ when $τ\to 0$, where $τ$ is the time remaining before the singularity. It is demonstrated that the presence of an outer liquid bath affects the self-similar structure through the prefactor of the film thinning law, $K(λ)$, and the opening angle of the self-similar film shape, which is shown to decrease with $λ$.
△ Less
Submitted 23 November, 2023;
originally announced November 2023.
-
Universal Free-Fall Law for Liquid Jets under Fully Developed Injection Conditions
Authors:
M. Beneitez,
D. Moreno-Boza,
A. Sevilla
Abstract:
We show that vertical slender jets of liquid injected in air with a fully-developed outlet velocity profile have a universal shape in the common case in which the viscous force is much smaller than the gravitational force. The theory of ideal flows with vorticity provides an analytical solution that, under negligible surface tension forces, predicts $R_j(Z)=[(1+Z/4)^{1/2}-(Z/4)^{1/2}]^{1/2}$, wher…
▽ More
We show that vertical slender jets of liquid injected in air with a fully-developed outlet velocity profile have a universal shape in the common case in which the viscous force is much smaller than the gravitational force. The theory of ideal flows with vorticity provides an analytical solution that, under negligible surface tension forces, predicts $R_j(Z)=[(1+Z/4)^{1/2}-(Z/4)^{1/2}]^{1/2}$, where $R_j$ is the jet radius scaled with the injector radius and $Z$ is the vertical distance scaled with the gravitational length, $l_g=u_o^2/2g$, where $u_o$ is the mean velocity at the injector outlet and $g$ is the gravitational acceleration. In contrast with Mariotte's law, $R_j=(1+Z)^{-1/4}$, previously reported experiments employing long injectors collapse almost perfectly onto the new solution.
△ Less
Submitted 23 November, 2023;
originally announced November 2023.
-
Linear stability of ultrathin spherical coatings
Authors:
D. Moreno-Boza,
A. Sevilla
Abstract:
We unravel the linear stability properties of an otherwise stagnant ultrathin non-wetting liquid film of thickness $h_o$ coating a spherical substrate of radius $R$. The configuration is known to be unstable due to the competition of the destabilizing van der Waals (vdW) forces and the stabilizing surface tension force. The governing equations of motion written in the Stokes limit of negligible li…
▽ More
We unravel the linear stability properties of an otherwise stagnant ultrathin non-wetting liquid film of thickness $h_o$ coating a spherical substrate of radius $R$. The configuration is known to be unstable due to the competition of the destabilizing van der Waals (vdW) forces and the stabilizing surface tension force. The governing equations of motion written in the Stokes limit of negligible liquid inertia and an accompanying lubrication model are linearised about the zero-velocity base state and decomposed into normal modes in order to obtain the temporal dispersion relation. Discrete unstable modes are identified and tracked as a function of a capillary number $Ca$ measuring the relative importance of surface tension to vdW forces and the film aspect ratio $η= R/h_o$. For small enough values of the capillary number only the first polar mode is unstable, and the corresponding maximum growth rate is shown to be a universal function of $η$. Lubrication theory is seen to provide a good quantitative prediction of the film stability properties for $η\gg 1$.
△ Less
Submitted 23 November, 2023;
originally announced November 2023.
-
Non-axisymmetric modes in ultrathin annular liquid films coating a cylindrical fibre
Authors:
D. Moreno-Boza,
A. Sevilla
Abstract:
This paper presents a detailed analysis of the three-dimensional stability properties of an annular liquid film coating a cylindrical fibre in the presence of van der Waals (vdW) interactions, whose influence depends on the wettability of the solid by the liquid. Under wetting conditions, vdW interactions can stabilise a uniform annular film when its thickness is smaller than a critical value that…
▽ More
This paper presents a detailed analysis of the three-dimensional stability properties of an annular liquid film coating a cylindrical fibre in the presence of van der Waals (vdW) interactions, whose influence depends on the wettability of the solid by the liquid. Under wetting conditions, vdW interactions can stabilise a uniform annular film when its thickness is smaller than a critical value that depends only on the fibre radius, the Hamaker constant, and the surface tension coefficient. In contrast, under non-wetting conditions, both surface tension and vdW forces contribute to destabilise the interface, and non-axisymmetric modes may become dominant depending on the thickness of the film and the relative strength of the surface tension and vdW forces. We perform temporal stability analyses of both the Stokes and lubrication equations of motion, allowing us to reveal the dominant azimuthal mode, as well as the optimal axial wavenumber and the corresponding temporal growth rate, as a function of the relevant governing parameters.
△ Less
Submitted 23 November, 2023;
originally announced November 2023.
-
The effect of wall slip on the dewetting of ultrathin films on solid substrates: Linear instability and second-order lubrication theory
Authors:
A. Martínez-Calvo,
D. Moreno-Boza,
A. Sevilla
Abstract:
The influence of wall slip on the instability of a non-wetting liquid film placed on a solid substrate is analyzed in the limit of negligible inertia. In particular, we focus on the stability properties of the film, comparing the performance of the three lubrication models available in the literature, namely the weak, intermediate and strong slip models, with the Stokes equations. Since none of th…
▽ More
The influence of wall slip on the instability of a non-wetting liquid film placed on a solid substrate is analyzed in the limit of negligible inertia. In particular, we focus on the stability properties of the film, comparing the performance of the three lubrication models available in the literature, namely the weak, intermediate and strong slip models, with the Stokes equations. Since none of the aforementioned leading-order lubrication models is shown to be able to predict the growth rate of perturbations for the whole range of slipping lengths, we develop a parabolic model able to accurately predict the linear dynamics of the film for arbitrary slip lengths.
△ Less
Submitted 15 October, 2020; v1 submitted 13 May, 2020;
originally announced May 2020.
-
Inertial rupture of ultrathin liquid films
Authors:
D. Moreno-Boza,
A. Martínez-Calvo,
A. Sevilla
Abstract:
Theory and numerical simulations of the Navier-Stokes equations are used to unravel the inertia-driven dewetting dynamics of an ultrathin film of Newtonian liquid deposited on a solid substrate. A classification of the film thinning regimes at finite Ohnersorge numbers is provided, unifying previous findings. We reveal that, for Ohnesorge numbers smaller than one, the final approach to the rupture…
▽ More
Theory and numerical simulations of the Navier-Stokes equations are used to unravel the inertia-driven dewetting dynamics of an ultrathin film of Newtonian liquid deposited on a solid substrate. A classification of the film thinning regimes at finite Ohnersorge numbers is provided, unifying previous findings. We reveal that, for Ohnesorge numbers smaller than one, the final approach to the rupture singularity close to the molecular scales is controlled by a balance between liquid inertia and van der Waals forces leading to a self-similar asymptotic regime with $h_{\text{min}} \propto τ^{2/5}$, where $h_{\text{min}}$ is the minimum film thickness and $τ$ is the time remaining before rupture. The flow exhibits a three-region structure comprising an irrotational core delimited by a pair of boundary layers at the wall and at the free surface. A potential-flow description of the irrotational core is provided, which is asymptotically matched with the viscous layers, allowing us to present a complete parameter-free asymptotic description of inertia-driven film rupture.
△ Less
Submitted 10 May, 2020;
originally announced May 2020.
-
Diffusion-flame flickering as a hydrodynamic global mode
Authors:
D. Moreno-Boza,
W. Coenen,
A. Sevilla,
J. Carpio,
A. L. Sánchez,
A. Liñán
Abstract:
The present study employs a linear global stability analysis to investigate buoyancy-induced flickering of axisymmetric laminar jet diffusion flames as a hydrodynamic global mode. The instability-driving interactions of the buoyancy force with the density differences induced by the chemical heat release are described in the infinitely fast reaction limit for unity Lewis numbers of the reactants. T…
▽ More
The present study employs a linear global stability analysis to investigate buoyancy-induced flickering of axisymmetric laminar jet diffusion flames as a hydrodynamic global mode. The instability-driving interactions of the buoyancy force with the density differences induced by the chemical heat release are described in the infinitely fast reaction limit for unity Lewis numbers of the reactants. The analysis determines the critical conditions at the onset of the linear global instability as well as the Strouhal number of the associated oscillations in terms of the governing parameters of the problem. Marginal instability boundaries are delineated in the Froude-number/Reynolds-number plane for different fuel-jet dilutions. The results of the global stability analysis are compared with direct numerical simulations of time-dependent axisymmetric jet flames and also with results of a local spatio-temporal stability analysis.
△ Less
Submitted 8 December, 2019;
originally announced December 2019.
-
Stokes theory of thin-film rupture
Authors:
D. Moreno-Boza,
A. Martínez-Calvo,
A. Sevilla
Abstract:
The structure of the flow induced by the van der Waals destabilization of a non-wetting liquid film placed on a solid substrate is unraveled by means of theory and numerical simulations of the Stokes equations. Our analysis reveals that lubrication theory, which yields $h_{\text{min}} \propto τ^{1/5}$ where $h_{\text{min}}$ is the minimum film thickness and $τ$ is the time until breakup, cannot be…
▽ More
The structure of the flow induced by the van der Waals destabilization of a non-wetting liquid film placed on a solid substrate is unraveled by means of theory and numerical simulations of the Stokes equations. Our analysis reveals that lubrication theory, which yields $h_{\text{min}} \propto τ^{1/5}$ where $h_{\text{min}}$ is the minimum film thickness and $τ$ is the time until breakup, cannot be used to describe the local flow close to rupture. Instead, the slender lubrication solution is shown to experience a crossover to a universal self-similar solution of the Stokes equations that yields $h_{\text{min}} \propto τ^{1/3}$, with an opening angle of $37^{\circ}$ off the solid.
△ Less
Submitted 15 January, 2020; v1 submitted 11 June, 2019;
originally announced June 2019.
