-
Droplet impact of Newtonian fluids and blood on simple fabrics: effect of fabric pore size and underlying substrate
Authors:
T. C. de Goede,
A. M. Moqaddam,
K. C. M. Limpens,
S. A. Kooij,
D. Derome,
J. Carmeliet,
N. Shahidzadeh,
D. Bonn
Abstract:
When a droplet impacts a fabric mesh at a sufficiently high impact velocity, it not only spreads over the fabric but also penetrate its pores. To determine the influence of this liquid penetration of the fabric on droplet spreading on thin fabric meshes, we measured the droplet spreading ratio on fabric with and without an underlying substrate using a high-speed camera. For fabrics without a subst…
▽ More
When a droplet impacts a fabric mesh at a sufficiently high impact velocity, it not only spreads over the fabric but also penetrate its pores. To determine the influence of this liquid penetration of the fabric on droplet spreading on thin fabric meshes, we measured the droplet spreading ratio on fabric with and without an underlying substrate using a high-speed camera. For fabrics without a substrate, the droplet spreading ratio is reduced as the fabric penetration by the liquid reduces the droplet volume spreading on top of the fabric. Using entropic lattice Boltzmann simulations, we find that the lower droplet spreading ratio on fabrics, both with and without a substrate, is due to an increase of viscous losses inside the droplet during spreading. Comparing droplet impact of blood with its Newtonian counterpart, we show that for spreading on fabrics, just like on smooth surfaces, blood can be approximated as a Newtonian fluid.
△ Less
Submitted 2 January, 2020;
originally announced January 2020.
-
Sprays from droplets impacting a mesh
Authors:
Stefan Kooij,
Ali Mazloomi Moqaddam,
Thijs C. de Goede,
Dominique Derome,
Jan Carmeliet,
Noushine Shahidzadeh,
Daniel Bonn
Abstract:
In liquid spray applications, the sprays are often created by the formation and destabilization of a liquid sheet or jet. The disadvantage of such atomization processes is that the breakup is often highly irregular, causing a broad distribution of droplet sizes. As these sizes are controlled by the ligament corrugation and size, a monodisperse spray should consist of ligaments that are both smooth…
▽ More
In liquid spray applications, the sprays are often created by the formation and destabilization of a liquid sheet or jet. The disadvantage of such atomization processes is that the breakup is often highly irregular, causing a broad distribution of droplet sizes. As these sizes are controlled by the ligament corrugation and size, a monodisperse spray should consist of ligaments that are both smooth and of equal size. A straightforward way of creating smooth and equally sized ligaments is by droplet impact on a mesh. In this work we show that this approach does however not produce monodisperse droplets, but instead the droplet size distribution is very broad, with a large number of small satellite drops. We demonstrate that the fragmentation is controlled by a jet instability, where initial perturbations caused by the injection process result in long-wavelength disturbances that determine the final ligament breakup. During destabilization the crests of these disturbances are connected by thin ligaments which are the leading cause of the large number of small droplets. A secondary coalescence process, due to small relative velocities between droplets, partly masks this effect by reducing the amount of small droplets. Of the many parameters in this system, we describe the effect of varying the mesh size, mesh rigidity, impact velocity, wetting properties, keeping the liquid properties the same by focusing on water droplets only. We further perform Lattice Boltzmann modeling of the impact process that reproduces key features seen in the experimental data.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Ternary free-energy entropic lattice Boltzmann model with high density ratio
Authors:
Moritz Wöhrwag,
Ciro Semprebon,
Ali Mazloomi Moqaddam,
Ilya Karlin,
Halim Kusumaatmaja
Abstract:
A rigorous free energy model for ternary fluid flows with density ratio up to of order $O(10^3)$ is presented and implemented using the entropic lattice Boltzmann scheme. The model is thermodynamically consistent and allows a broad range of surface tension ratios, covering both partial wetting states where Neumann triangles are formed, and full wetting states where complete encapsulation of one of…
▽ More
A rigorous free energy model for ternary fluid flows with density ratio up to of order $O(10^3)$ is presented and implemented using the entropic lattice Boltzmann scheme. The model is thermodynamically consistent and allows a broad range of surface tension ratios, covering both partial wetting states where Neumann triangles are formed, and full wetting states where complete encapsulation of one of fluid components is observed. We further demonstrate that we can capture the bouncing, adhesive and insertive regimes for the binary collisions between immiscible droplets suspended in air. Our approach opens up a vast range of multiphase flow applications involving one gas and several liquid components.
△ Less
Submitted 11 May, 2018; v1 submitted 20 October, 2017;
originally announced October 2017.
-
Drops bouncing off macro-textured superhydrophobic surfaces
Authors:
Ali Mazloomi Moqaddam,
Shyam S. Chikatamarla,
Ilya Karlin
Abstract:
Recent experiments with droplets impacting a macro-textured superhydrophobic surfaces revealed new regimes of bouncing with a remarkable reduction of the contact time. We present here a comprehensive numerical study that reveals the physics behind these new bouncing regimes and quantify the role played by various external and internal forces that effect the dynamics of a drop impacting a complex s…
▽ More
Recent experiments with droplets impacting a macro-textured superhydrophobic surfaces revealed new regimes of bouncing with a remarkable reduction of the contact time. We present here a comprehensive numerical study that reveals the physics behind these new bouncing regimes and quantify the role played by various external and internal forces that effect the dynamics of a drop impacting a complex surface. For the first time, three-dimensional simulations involving macro-textured surfaces are performed. Aside from demonstrating that simulations reproduce experiments in a quantitative manner, the study is focused on analyzing the flow situations beyond current experiments. We show that the experimentally observed reduction of contact time extends to higher Weber numbers, and analyze the role played by the texture density. Moreover, we report a non-linear behavior of the contact time with the increase of the Weber number for application relevant imperfectly coated textures, and also study the impact on tilted surfaces in a wide range of Weber numbers. Finally, we present novel energy analysis techniques that elaborate and quantify the interplay between the kinetic and surface energy, and the role played by the dissipation for various Weber numbers.
△ Less
Submitted 10 August, 2016;
originally announced August 2016.
