Showing 1–39 of 39 results for author: Mondal, A

Attosecond-resolved probing of recolliding electron wave packets in liquids and aqueous solutions

Authors: Angana Mondal, Nicolas Tancogne-Dejean, George Trenins, Sona Achotian, Meng Han, Tadas Balciunas, Zhong Yin, Angel Rubio, Mariana Rossi, Ofer Neufeld, Hans Jakob Wörner

Abstract: High-harmonic spectroscopy (HHS) in liquids promises real-time access to ultrafast electronic dynamics in the native environment of chemical and biological processes. While electron recollision has been established as the dominant mechanism of high-harmonic generation (HHG) in liquids, resolving the underlying electron dynamics has remained elusive. Here we demonstrate attosecond-resolved measurem… ▽ More High-harmonic spectroscopy (HHS) in liquids promises real-time access to ultrafast electronic dynamics in the native environment of chemical and biological processes. While electron recollision has been established as the dominant mechanism of high-harmonic generation (HHG) in liquids, resolving the underlying electron dynamics has remained elusive. Here we demonstrate attosecond-resolved measurements of recolliding electron wave packets, extending HHS from neat liquids to aqueous solutions. Using phase-controlled two-colour fields, we observe a linear scaling of the two-colour delay that maximizes even-harmonic emission with photon energy, yielding slopes of 208+/-55 as/eV in ethanol and 124+/-42 as/eV in water, the latter matching ab initio simulations (125+/-48 as/eV). In aqueous salt solutions, we uncover interference minima whose appearance depends on solute type and concentration, arising from destructive interference between solute and solvent emission. By measuring the relative phase of solvent and solute HHG, we retrieve a variation of electron transit time by 113+/-32 as/eV, consistent with our neat-liquid results. These findings establish HHS as a powerful attosecond-resolved probe of electron dynamics in disordered media, opening transformative opportunities for studying ultrafast processes such as energy transfer, charge migration, and proton dynamics in liquids and solutions. △ Less

Submitted 16 September, 2025; originally announced September 2025.

Comments: 20 pages, 11 figures

Evidence for ultra-water-rich ammonia hydrates stabilized in icy exoplanetary mantles

Authors: Anshuman Mondal, Katharina Mohrbach, Timofey Fedotenko, Mandy Bethkenhagen, Hanns-Peter Liermann, Carmen Sanchez-Valle

Abstract: Understanding the behavior of the water-ammonia system at high pressure-high temperature conditions is important for modeling the internal dynamics of exoplanet icy mantles. Conventionally, mixtures of ammonia hemihydrate AHH (2:1 ammonia-water molar ratio) and H2O ice VII have been regarded as the ultimate solid phase assembly in the system. Here we report evidence for chemical reactions between… ▽ More Understanding the behavior of the water-ammonia system at high pressure-high temperature conditions is important for modeling the internal dynamics of exoplanet icy mantles. Conventionally, mixtures of ammonia hemihydrate AHH (2:1 ammonia-water molar ratio) and H2O ice VII have been regarded as the ultimate solid phase assembly in the system. Here we report evidence for chemical reactions between AHH and ice VII above 750 K and 16 GPa that stabilize water-rich ammonia hydrates, including a novel ultra-water rich hydrate NH3.6H2O (1:6 ratio) coexisting with ammonia dihydrate ADH (1:2 ratio) and excess ice VII. This assembly is stable up to at least 30 GPa and 1600 K and can be quenched to room temperature. Our results demonstrate that water-rich ammonia hydrates are favored in the icy mantle of 1-2 MEarth exoplanets regardless of the ammonia content of the hydrate crystallized during accretion and/or evolution as long as excess H2O ice is available. The buoyancy contrast between water-rich hydrates and ice VII may lead to chemical stratification in exoplanet icy mantles, hence affecting their thermal evolution. △ Less

Submitted 16 August, 2025; originally announced August 2025.

Comments: Main text (22 pages and 5 figures) and Supplementary information (Text S1, Figures S1 to S13, Tablers S1 and S2)

Enhancing cluster synchronization in phase-lagged multilayer networks

Authors: Abhijit Mondal, Pitambar Khanra, Subrata Ghosh, Prosenjit Kundu, Chittaranjan Hens, Pinaki Pal

Abstract: Cluster synchronization in multilayer networks of phase oscillators with phase-lag poses significant challenges due to the destabilizing effects of delayed interactions. Leveraging the Sakaguchi-Kuramoto model, this study addresses these challenges by systematically exploring the role of natural frequency distributions in sustaining cluster synchronization under high phase-lag conditions. We focus… ▽ More Cluster synchronization in multilayer networks of phase oscillators with phase-lag poses significant challenges due to the destabilizing effects of delayed interactions. Leveraging the Sakaguchi-Kuramoto model, this study addresses these challenges by systematically exploring the role of natural frequency distributions in sustaining cluster synchronization under high phase-lag conditions. We focus on four distributions: uniform (uni-uni), partially degree-correlated (deg-uni, uni-deg), and fully degree-correlated (deg-deg), where oscillators' intrinsic frequencies align with their network connectivity. Through numerical and analytical investigations, we demonstrate that the deg-deg distribution, where both layers employ degree-matched frequencies, remarkably enhances synchronization stability, outperforming other configurations. We analyze two distinct network architectures: one composed entirely of nontrivial clusters and another combining trivial and nontrivial clusters. Results reveal that structural heterogeneity encoded in the deg-deg coupling counteracts phase-lag-induced desynchronization, enabling robust cluster synchronization even at large phase-lag values. Stability is rigorously validated via transverse Lyapunov exponents (TLEs), which confirm that deg-deg networks exhibit broader synchronization regimes compared to uniform or partially correlated systems. These findings provide critical insights into the interplay between topological heterogeneity and dynamical resilience, offering a framework for designing robust multilayer systems from delay-tolerant power grids to adaptive biological networks, where synchronization under phase-lag is paramount. △ Less

Submitted 25 July, 2025; originally announced August 2025.

Multi-plateau high-harmonic generation in liquids driven by off-site recombination

Authors: Angana Mondal, Ofer Neufeld, Tadas Balciunas, Benedikt Waser, Serge Müller, Mariana Rossi, Zhong Yin, Angel Rubio, Nicolas Tancogne-Dejean, Hans Jakob Wörner

Abstract: Non-perturbative high-harmonic generation (HHG) has recently been observed in the liquid phase, where it was demonstrated to have a different physical mechanism compared to gas and solid phases of matter. The currently best physical picture for liquid HHG eliminates scattered-electron contributions and identifies on-site recombination as the dominant contributor. This mechanism accurately predicts… ▽ More Non-perturbative high-harmonic generation (HHG) has recently been observed in the liquid phase, where it was demonstrated to have a different physical mechanism compared to gas and solid phases of matter. The currently best physical picture for liquid HHG eliminates scattered-electron contributions and identifies on-site recombination as the dominant contributor. This mechanism accurately predicts the cut-off energy and its independence of the driving laser wavelength and intensity. However, this implies that additional energy absorbed in the liquid as the driving laser intensity is increased does not result in higher-order non-linearities, which is in contrast to the conventional expectation from most nonlinear media. Here we experimentally observe the formation of a second plateau in HHG from multiple liquids (water, heavy water, propranol, and ethanol), thus explaining the conundrum of the missing higher-order response. We analyze this second plateau with a combination of experimental, state-of-the-art ab-initio numerical (in diverse systems of water, ammonia, and liquid methane), and semi-classical analytical, techniques, and elucidate its physical origin to electrons that recombine on neighboring water molecules rather than at the ionization site, leading to unique HHG ellipticity dependence. Remarkably, we find that the second plateau is dominated by electrons recombining at the second solvation shell, relying on wide hole delocalization. Theory also predicts the appearance of even higher plateaus, indicating a general trend. Our work establishes new physical phenomena in the highly non-linear optical response of liquids, paving the way to attosecond probing of electron dynamics in solutions. △ Less

Submitted 30 June, 2025; originally announced June 2025.

Comments: 29 pages, 9 figures in main text, *These authors contributed equally

A compact laser-plasma source for high-repetition-rate bi-modal X-ray and electron imaging

Authors: Angana Mondal, Ratul Sabui, Sonali Khanna, S V Rahul, Sheroy Tata, M Anand, Ram Gopal, M Krishnamurthy

Abstract: Bright sources of high-energy X-rays and electrons are indispensable tools in advanced imaging. Yet, current laser-driven systems typically support only single-modality imaging, require complex infrastructure, or operate at low repetition rates. Here, we demonstrate a compact, table-top laser-plasma source capable of generating synchronized electron and X-ray pulses at 1 kHz using just 2 mJ per pu… ▽ More Bright sources of high-energy X-rays and electrons are indispensable tools in advanced imaging. Yet, current laser-driven systems typically support only single-modality imaging, require complex infrastructure, or operate at low repetition rates. Here, we demonstrate a compact, table-top laser-plasma source capable of generating synchronized electron and X-ray pulses at 1 kHz using just 2 mJ per pulse. A structured methanol droplet target enables quasi-single-shot electron radiographs and broadband, energy-resolved X-ray images, facilitating bi-modal imaging of both metallic and biological specimens. We achieve resolutions of 13.6 um for electrons and 21 um for X-rays, and demonstrate tomographic reconstruction using 35 projections. This compact platform rivals large-scale petawatt systems in resolution and brightness, while remaining scalable and accessible for high-throughput imaging in materials science and biomedicine. △ Less

Submitted 24 April, 2025; originally announced April 2025.

Comments: 10 pages, 5 figures

Enhanced hot electron generation from liquid jets in moderate intensity laser-plasma interactions

Authors: Ratul Sabui, S. V. Rahul, Angana Mondal, Archit Bhardwaj, Ram Gopal, Vandana Sharma, M. Krishnamurthy

Abstract: We report the generation of MeV temperature electrons using sub-terawatt laser systems with a liquid methanol jet as a target. Remarkably, even at laser intensities of 1016W/cm2, liquid cylindrical (2D) 15 micron methanol jets produce electrons with temperatures of 1 MeV. Hot electron emission characteristics are strikingly similar to those observed in spherical microdroplet (3D) targets. These re… ▽ More We report the generation of MeV temperature electrons using sub-terawatt laser systems with a liquid methanol jet as a target. Remarkably, even at laser intensities of 1016W/cm2, liquid cylindrical (2D) 15 micron methanol jets produce electrons with temperatures of 1 MeV. Hot electron emission characteristics are strikingly similar to those observed in spherical microdroplet (3D) targets. These results validate that modeling such experiments using 2D PIC simulation is not a compromising approximation. This work further simplifies the experimental complexities towards a multi-KHz highly regenerative source of directed multi-MeV electron (and associated x-ray and ion) generation, demanding laser intensities 100x lower than conventional laser plasma sources. Increased source energy and pointing stability are crucial for imaging or radiographic applications from such sources. △ Less

Submitted 4 April, 2025; originally announced April 2025.

Exploring the BSM parameter space with Neural Network aided Simulation-Based Inference

Authors: Atrideb Chatterjee, Arghya Choudhury, Sourav Mitra, Arpita Mondal, Subhadeep Mondal

Abstract: Some of the issues that make sampling parameter spaces of various beyond the Standard Model (BSM) scenarios computationally expensive are the high dimensionality of the input parameter space, complex likelihoods, and stringent experimental constraints. In this work, we explore likelihood-free approaches, leveraging neural network-aided Simulation-Based Inference (SBI) to alleviate this issue. We f… ▽ More Some of the issues that make sampling parameter spaces of various beyond the Standard Model (BSM) scenarios computationally expensive are the high dimensionality of the input parameter space, complex likelihoods, and stringent experimental constraints. In this work, we explore likelihood-free approaches, leveraging neural network-aided Simulation-Based Inference (SBI) to alleviate this issue. We focus on three amortized SBI methods: Neural Posterior Estimation (NPE), Neural Likelihood Estimation (NLE), and Neural Ratio Estimation (NRE) and perform a comparative analysis through the validation test known as the \textit{ Test of Accuracy with Random Points} (TARP), as well as through posterior sample efficiency and computational time. As an example, we focus on the scalar sector of the phenomenological minimal supersymmetric SM (pMSSM) and observe that the NPE method outperforms the others and generates correct posterior distributions of the parameters with a minimal number of samples. The efficacy of this framework will be more evident with additional experimental data, especially for high dimensional parameter space. △ Less

Submitted 17 February, 2025; originally announced February 2025.

Comments: 31 pages, 11 figures

Cascade hot carriers via broad-band resonant tunneling

Authors: Kamal Kumar Paul, Ashok Mondal, Jae Woo Kim, Ji-Hee Kim, Young Hee Lee

Abstract: Extraction of hot carriers (HCs) over the band-edge is a key to harvest solar energy beyond Shockley-Queisser limit1. Graphene is known as a HC-layered material due to phonon bottleneck effect near Dirac point, but limited by low photocarrier density2. Graphene/transition metal dichalcogenide (TMD) heterostructures circumvent this issue by ultrafast carrier transfer from TMD to graphene2,3. Nevert… ▽ More Extraction of hot carriers (HCs) over the band-edge is a key to harvest solar energy beyond Shockley-Queisser limit1. Graphene is known as a HC-layered material due to phonon bottleneck effect near Dirac point, but limited by low photocarrier density2. Graphene/transition metal dichalcogenide (TMD) heterostructures circumvent this issue by ultrafast carrier transfer from TMD to graphene2,3. Nevertheless, efficient extraction of photocurrent by means of HCs together with carrier multiplication (CM) is still missing. Here, we introduce an ultrathin broadband resonant tunneling (BRT) barrier, TiOX to efficiently extract photocurrent with simultaneous CM and HC measurements in MoS2/graphene/TiOX heterostructure. The BRT layer gives rise to boosting open circuit voltage which is linearly proportional to incident photon energy. Meanwhile, short circuit current rises rapidly over 2Eg with obvious CM feature. This was explained by defining the joint density of states between graphene and TiOX layer over positive and negative voltage. The broadband resonant tunneling states inherently constructed from oxidation states varying from Ti3+ to Ti4+ allow the ultrafast HCs to efficiently transfer from graphene to TiOX layer. We find that the number of available tunneling states is directly proportional to short circuit current, which is well corroborated with TiOX and MoS2 thickness variance. We obtained an optimum thickness of BRT layer of ~2.8 nm, yielding cascade open circuit voltage as high as ~0.7 V, two orders of magnitude higher than that without BRT layer to reach a record efficiency of 5.3% with improved fill factor owing to synergistic HC and CM conversion under 1-SUN with long-term stability. △ Less

Submitted 8 November, 2024; originally announced November 2024.

Study of Gas Electron Multiplier Detector Using ANSYS and GARFIELD$^{++}$

Authors: Md Kaosor Ali Mondal, Poojan Angiras, Sachin Rana, A. Sarkar

Abstract: Micro-Pattern Gas Detectors (MPGDs) represent a category of gaseous ionization detectors that utilize microelectronics. They feature a remarkably small distance between the high potential difference anode and cathode electrodes and are typically filled with gases. When a high-energy particle interacts with the gas medium, it generates ions and electrons, which are subsequently accelerated in oppos… ▽ More Micro-Pattern Gas Detectors (MPGDs) represent a category of gaseous ionization detectors that utilize microelectronics. They feature a remarkably small distance between the high potential difference anode and cathode electrodes and are typically filled with gases. When a high-energy particle interacts with the gas medium, it generates ions and electrons, which are subsequently accelerated in opposite directions due to the applied electric field. Deflected electrons trigger further ionization to create electron-ion pairs through an avalanche process. These particles can be detected with very high precision at the readout. The Gas Electron Multiplier (GEM) is one type of MPGD constructed with a polyimide film sandwiched between two conductors under a high voltage difference. Microscopic holes in the foil facilitate electron avalanche. However, the current geometry of the GEM detector used in various experiments is sub-optimal for the gain and performance. In this study, we have modified the geometry of the GEM detector to enhance the gain, reduce ions backflow, and enhance the performance of the detector. We are proposing a new geometry of the GEM detector foil for higher gain, better performance, and durability. For this study, the geometry has been constructed in ANSYS, and further studies have been performed using Garfield$^{++}$. △ Less

Submitted 7 October, 2024; originally announced October 2024.

Spin Hall Nano-Antenna

Authors: Raisa Fabiha, Pratap Kumar Pal, Michael Suche, Amrit Kumar Mondal, Erdem Topsakal, Anjan Barman, Supriyo Bandyopadhyay

Abstract: The spin Hall effect is a celebrated phenomenon in spintronics and magnetism that has found numerous applications in digital electronics (memory and logic), but very few in analog electronics. Practically, the only analog application in widespread use is the spin Hall nano-oscillator (SHNO) that delivers a high frequency alternating current or voltage to a load. Here, we report its analogue - a sp… ▽ More The spin Hall effect is a celebrated phenomenon in spintronics and magnetism that has found numerous applications in digital electronics (memory and logic), but very few in analog electronics. Practically, the only analog application in widespread use is the spin Hall nano-oscillator (SHNO) that delivers a high frequency alternating current or voltage to a load. Here, we report its analogue - a spin Hall nano-antenna (SHNA) that radiates a high frequency electromagnetic wave (alternating electric/magnetic fields) into the surrounding medium. It can also radiate an acoustic wave in an underlying substrate if the nanomagnets are made of a magnetostrictive material. That makes it a dual electromagnetic/acoustic antenna. The SHNA is made of an array of ledged magnetostrictive nanomagnets deposited on a substrate, with a heavy metal nanostrip underlying/overlying the ledges. An alternating charge current passed through the nanostrip generates an alternating spin-orbit torque in the nanomagnets via the spin Hall effect which makes their magnetizations oscillate in time with the frequency of the current, producing confined spin waves (magnons), which radiate electromagnetic waves (photons) in space with the same frequency as the ac current. Despite being much smaller than the radiated wavelength, the SHNA surprisingly does not act as a point source which would radiate isotropically. Instead, there is clear directionality (anisotropy) in the radiation pattern, which is frequency-dependent. This is due to the (frequency-dependent) intrinsic anisotropy in the confined spin wave patterns generated within the nanomagnets, which effectively endows the "point source" with internal anisotropy. △ Less

Submitted 15 August, 2024; originally announced August 2024.

Dynamics of Coupled Metamaterials: Acoustic Black Hole, Local Resonator & Multistable Oscillator

Authors: Arghya Mondal

Abstract: Vibration attenuation has played a crucial role in engineering structure, wherein metamaterials have found escalated usage. These structures can be cleverly built to be lightweight and have negative mass properties, which can attenuate waves at specific frequency bands. The first part studies wave propagation in meta-beam with coupled acoustic black holes and local resonators, whereas the second p… ▽ More Vibration attenuation has played a crucial role in engineering structure, wherein metamaterials have found escalated usage. These structures can be cleverly built to be lightweight and have negative mass properties, which can attenuate waves at specific frequency bands. The first part studies wave propagation in meta-beam with coupled acoustic black holes and local resonators, whereas the second part discusses multi-stable nonlinear oscillators in a 1D metamaterial chain. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: Master's thesis

Searches for the BSM scenarios at the LHC using decision tree based machine learning algorithms: A comparative study and review of Random Forest, Adaboost, XGboost and LightGBM frameworks

Authors: Arghya Choudhury, Arpita Mondal, Subhadeep Sarkar

Abstract: Machine learning algorithms are now being extensively used in our daily lives, spanning across diverse industries as well as academia. In the field of high energy physics (HEP), the most common and challenging task is separating a rare signal from a much larger background. The boosted decision tree (BDT) algorithm has been a cornerstone of the high energy physics for analyzing event triggering, pa… ▽ More Machine learning algorithms are now being extensively used in our daily lives, spanning across diverse industries as well as academia. In the field of high energy physics (HEP), the most common and challenging task is separating a rare signal from a much larger background. The boosted decision tree (BDT) algorithm has been a cornerstone of the high energy physics for analyzing event triggering, particle identification, jet tagging, object reconstruction, event classification, and other related tasks for quite some time. This article presents a comprehensive overview of research conducted by both HEP experimental and phenomenological groups that utilize decision tree algorithms in the context of the Standard Model and Supersymmetry (SUSY). We also summarize the basic concept of machine learning and decision tree algorithm along with the working principle of \texttt{Random Forest}, \texttt{AdaBoost} and two gradient boosting frameworks, such as \texttt{XGBoost}, and \texttt{LightGBM}. Using a case study of electroweakino productions at the high luminosity LHC, we demonstrate how these algorithms lead to improvement in the search sensitivity compared to traditional cut-based methods in both compressed and non-compressed R-parity conserving SUSY scenarios. The effect of different hyperparameters and their optimization, feature importance study using SHapley values are also discussed in detail. △ Less

Submitted 22 July, 2025; v1 submitted 9 May, 2024; originally announced May 2024.

Comments: Published in EPJST

Journal ref: Eur.Phys.J.ST 233 (2024) 2425-2463

Spatiotemporal spectral transfers in fluid dynamics

Authors: Avik Mondal, Andrew J. Morten, Brian K. Arbic, Glenn R. Flierl, Robert B. Scott, Joseph Skitka

Abstract: Motivated by previous work on kinetic energy cascades in the ocean and atmosphere, we develop a spatio-temporal spectral transfer tool that can be used to study scales of variability in generalized dynamical systems. In particular, we use generalized time-frequency methods from signal analysis to broaden the applicability of frequency transfers from theoretical to practical applications such as th… ▽ More Motivated by previous work on kinetic energy cascades in the ocean and atmosphere, we develop a spatio-temporal spectral transfer tool that can be used to study scales of variability in generalized dynamical systems. In particular, we use generalized time-frequency methods from signal analysis to broaden the applicability of frequency transfers from theoretical to practical applications such as the study of ocean or atmosphere data or simulation output. We also show that triad interactions in wavenumber used to study kinetic energy and enstrophy cascades can be generalized to study triad interactions in frequency or wavenumber-frequency. We study the effects of sweeping on the locality of frequency transfers and frequency triad interactions to better understand the locality of spatio-temporal frequency transfers. As an illustrative example, we use the spatio-temporal spectral transfer tool to study the results of a simulation of two-dimensional homogeneous isotropic turbulence. This simulated fluid is forced at a well-defined wavenumber and frequency with dissipation occurring at both large and small scales, making this one of the first studies of "modulated turbulence" in two dimensions. Our results show that the spatio-temporal transfers we develop in this paper are robust to potential practical problems such as low sampling rates or nonstationarity in time series of interest. We anticipate that this method will be a useful tool in studying scales of spatio-temporal variability in a wide range of fluids applications as higher resolution data and simulations become more widely available. △ Less

Submitted 21 May, 2025; v1 submitted 3 May, 2024; originally announced May 2024.

Comments: 30 pages, 11 figures, 1 table. Avik Mondal and Andrew J Morten report themselves as co-first authors. Please cite as Mondal, Morten et al. Submitted to Phys Rev Fluids

Simulating neuronal dynamics in fractional adaptive exponential integrate-and-fire models

Authors: Alexandru Fikl, Aman Jhinga, Eva Kaslik, Argha Mondal

Abstract: We introduce an efficient discretization of a novel fractional-order adaptive exponential (FrAdEx) integrate-and-fire model, which is used to study the fractional-order dynamics of neuronal activities. The discretization is based on extension of L1-type methods that can accurately handle the exponential growth and the spiking mechanism of the model. This new method is implicit and uses adaptive ti… ▽ More We introduce an efficient discretization of a novel fractional-order adaptive exponential (FrAdEx) integrate-and-fire model, which is used to study the fractional-order dynamics of neuronal activities. The discretization is based on extension of L1-type methods that can accurately handle the exponential growth and the spiking mechanism of the model. This new method is implicit and uses adaptive time stepping to robustly handle the stiff system that arises due to the exponential term. The implicit nonlinear system can be solved exactly, without the need for iterative methods, making the scheme efficient while maintaining accuracy. We present a complete error model for the numerical scheme that can be extended to other integrate-and-fire models with minor changes. To show the feasibility of our approach, the numerical method has been rigorously validated and used to investigate several different spiking oscillations of the model. We observed that the fractional-order model is capable of predicting biophysical activities, which are interpreted through phase diagrams describing the transition from one firing type to another. This simple model shows significant promise, as it has sufficient expressive dynamics to reproduce several features qualitatively from a biophysical dynamical perspective. △ Less

Submitted 29 May, 2024; v1 submitted 21 April, 2024; originally announced April 2024.

Comments: 27 pages, 9 figures. v1: changed title, updated references

MSC Class: 26A33 (Primary) 37M05; 37N25; 45D05; 45G15; 65R20; 92C20 (Secondary)

Field-extension statistics of charged semiflexible polymers stretched with uniform electric fields

Authors: Ananya Mondal, Greg Morrison

Abstract: Single-molecule force-extension experiments have allowed quantitative measurements of the mechanical responses of biomolecules to applied forces explaining their roles in key biological functions. Electrophoretic stretching of charged polymers such as DNA in uniform electric fields is one such example, currently, used for sequencing purposes. Field-extension statistics of charged polymers differ f… ▽ More Single-molecule force-extension experiments have allowed quantitative measurements of the mechanical responses of biomolecules to applied forces explaining their roles in key biological functions. Electrophoretic stretching of charged polymers such as DNA in uniform electric fields is one such example, currently, used for sequencing purposes. Field-extension statistics of charged polymers differ from laser optical tweezer setups due to a non-uniform tension along the backbone of the chain, the effects of which remain poorly understood. In this paper, we modify an existing analytically tractable mean-field (MF) approach to account for the heterogeneity in tension for electric fields. Naively using this model for stretching of charged polymers such as DNA under electric fields results in local overstretching of the chain and gives inaccurate field-extension statistics. We improve this approach and account for the inhomogeneity in the tension by subdividing the chain into smaller segments while imposing the inextensibility of the chain. We find that the subdivided MF model shows better agreement with the simulations for the force-extension plots. We also show that using an isotropic mean-field model overestimates the longitudinal fluctuations both for tension forces as well as for fields. We correct the quantitative predictions for the fluctuations in the mean extension by numerically differentiating the field-extension plots. We also find that the subdivided MF model can accurately predict the statistics of experimentally relevant quantities, such as transverse fluctuations, due to the analytical tractability of the model. These field-extension predictions may be further used to introduce confinement effects in the subdivided MF model and develop a comprehensive understanding of sequencing technologies. △ Less

Submitted 19 February, 2024; originally announced February 2024.

Parametric analysis of electron beam quality in laser wakefield acceleration based on the truncated ionization injection mechanism

Authors: Srimanta Maity, Alamgir Mondal, Eugene Vishnyakov, Alexander Molodozhentsev

Abstract: Laser wakefield acceleration (LWFA) in a gas cell target separating injection and acceleration section has been investigated to produce high-quality electron beams. A detailed study has been performed on controlling the quality of accelerated electron beams using a combination of truncated ionization and density downramp injection mechanisms. For this purpose, extensive two-dimensional Particle-In… ▽ More Laser wakefield acceleration (LWFA) in a gas cell target separating injection and acceleration section has been investigated to produce high-quality electron beams. A detailed study has been performed on controlling the quality of accelerated electron beams using a combination of truncated ionization and density downramp injection mechanisms. For this purpose, extensive two-dimensional Particle-In-Cell (PIC) simulations have been carried out considering a gas cell target consisting of a hydrogen and nitrogen mixture in the first part and pure hydrogen in the second part. Such a configuration can be realized experimentally using a specially designed capillary setup. Using the parameters already available in the existing experimental setups, we show the generation of an electron beam with a peak energy of 500-600 MeV, relative energy spread less than 5%, normalized beam emittance around 1.5 mm-mrad, and beam charge of 2-5 pC/micrometer. Our study reveals that the quality of the accelerated electron beam can be independently controlled and manipulated through the beam loading effect by tuning the parameters, e.g., laser focusing position, nitrogen concentration, and gas target profile. These simulation results will be useful for future experimental campaigns on LWFA, particularly at ELI Beamlines. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Comments: 24 pages, 11 figures (accepted in Plasma Physics and Controlled Fusion, IOP Publishing)

Apodized photonic crystals: A non-dissipative system hosting multiple exceptional points

Authors: Abhishek Mondal, Shailja Sharma, Ritwick Das

Abstract: Optical systems obeying non-Hermitian dynamics have been the subject of intense and concerted investigation over the last two decades owing to their broad implications in photonics, acoustics, electronics as well as atomic physics. A vast majority of such investigations rely on a dissipative, balanced loss-gain system which introduces unavoidable noise and consequently, this limits the coherent co… ▽ More Optical systems obeying non-Hermitian dynamics have been the subject of intense and concerted investigation over the last two decades owing to their broad implications in photonics, acoustics, electronics as well as atomic physics. A vast majority of such investigations rely on a dissipative, balanced loss-gain system which introduces unavoidable noise and consequently, this limits the coherent control of propagation dynamics. Here, we show that an all-dielectric, non-dissipative photonic crystal (PC) could host, at least two exceptional points in its eigenvalue spectrum. By introducing optimum apodization in the PC architecture, namely 1D-APC, we show that such a configuration supports a spectrum of exceptional points which distinctly demarcates the PT-symmetric region from the region where PT -symmetry is broken in the parameter space. The analytical framework allows us to estimate the geometric phase of the reflected beam and derive the constraint that governs the excitation of topologically-protected optical Tamm-plasmon modes in 1D-APCs. △ Less

Submitted 10 January, 2023; originally announced January 2023.

High-harmonic generation in liquids with few-cycle pulses: effect of laser-pulse duration on the cut-off energy

Authors: Angana Mondal, Benedikt Waser, Tadas Balciunas, Ofer Neufeld, Zhong Yin, Nicolas Tancogne-Dejean, Angel Rubio, Hans Jakob Wörner

Abstract: High-harmonic generation (HHG) in liquids is opening new opportunities for attosecond light sources and attosecond time-resolved studies of dynamics in the liquid phase. In gas-phase HHG, few-cycle pulses are routinely used to create isolated attosecond pulses and to extend the cut-off energy. Here, we study the properties of HHG in liquids, including water and several alcohols, by continuously tu… ▽ More High-harmonic generation (HHG) in liquids is opening new opportunities for attosecond light sources and attosecond time-resolved studies of dynamics in the liquid phase. In gas-phase HHG, few-cycle pulses are routinely used to create isolated attosecond pulses and to extend the cut-off energy. Here, we study the properties of HHG in liquids, including water and several alcohols, by continuously tuning the pulse duration of a mid-infrared driver from the multi- to the sub-two-cycle regime. Similar to the gas phase, we observe the transition from discrete odd-order harmonics to continuous extreme-ultraviolet emission. However, the cut-off energy is shown to be entirely independent of the pulse duration. This observation is confirmed by ab-initio simulations of HHG in large clusters. Our results support the notion that the cut-off energy is a fundamental property of the liquid, independent of the driving-pulse properties. Combined with the recently reported wavelength-independence of the cutoff, these results confirm the direct sensitivity of HHG to the mean-free paths of slow electrons in liquids. Our results additionally imply that few-cycle mid-infrared laser pulses are suitable drivers for generating isolated attosecond pulses from liquids. △ Less

Submitted 14 October, 2022; originally announced October 2022.

Comments: 9 pages, 5 figures

Manifestations of the structural origin of supercooled water's anomalies in the heterogeneous relaxation on the potential energy landscape

Authors: Arijit Mondal, Gadha R., Rakesh S. Singh

Abstract: Liquid water is well-known for its intriguing thermodynamic anomalies in the supercooled state. The phenomenological two-state models - based on the assumption of the existence of two types of competing local states (or, structures) in liquid water - have been extremely successful in describing water's thermodynamic anomalies. However, the precise structural features of these competing local state… ▽ More Liquid water is well-known for its intriguing thermodynamic anomalies in the supercooled state. The phenomenological two-state models - based on the assumption of the existence of two types of competing local states (or, structures) in liquid water - have been extremely successful in describing water's thermodynamic anomalies. However, the precise structural features of these competing local states in liquid water still remain elusive. Here, we have employed a geometrical order parameter-free approach to unambiguously identify the two types of competing local states -- entropically and energetically-favored -- with significantly different structural and energetic features in the TIP4P/2005 liquid water. This identification is based on the heterogeneous structural relaxation of the system in the potential energy landscape (PEL) during the steepest-descent energy minimization. This heterogeneous relaxation is characterized using order parameters inspired by the spin-glass transition in frustrated magnetic systems. We have further established a direct relationship between the population fluctuation of the two states and the anomalous behavior of the heat capacity in supercooled water. The composition-dependent spatial distribution of the entropically-favored local states shows an interesting crossover from a spanning network-like single cluster to the spatially delocalized clusters in the close vicinity of the Widom line. Additionally, this study establishes a direct relationship between the topographic features of the PEL and the water's thermodynamic anomalies in the supercooled state and provides alternate markers (in addition to the locus of maxima of thermodynamic response functions) for the Widom line in the phase plane. △ Less

Submitted 30 August, 2022; originally announced August 2022.

Lithium fluoride (LiF) target preparation for nuclear physics experiment

Authors: Lalit Kumar Sahoo, Ashok Kumar Mondal, Dipali Basak, Chinmay Basu, Suraj Kumar Karan

Abstract: The LiF target preparation on self-supporting Ag backing (LiF/Ag) is discussed in a detailed manner using vacuum evaporation process. The target thickness is measured using the energy loss of three line alpha source. 183.74 μg/cm 2 thickness of LiF is achieved through the evaporation process. Good uniformity of targets is observed. Non-uniformity in targets is found within 6 %. The XPS analysis co… ▽ More The LiF target preparation on self-supporting Ag backing (LiF/Ag) is discussed in a detailed manner using vacuum evaporation process. The target thickness is measured using the energy loss of three line alpha source. 183.74 μg/cm 2 thickness of LiF is achieved through the evaporation process. Good uniformity of targets is observed. Non-uniformity in targets is found within 6 %. The XPS analysis confirms the presence of both the F and Li atoms on sample surface. △ Less

Submitted 4 August, 2022; originally announced August 2022.

Journal ref: Vacuum 212 (2023) 112055

Compression-induced continuous phase transition in the buckling of a semiflexible filament for two and three dimensions

Authors: Ananya Mondal, Greg Morrison

Abstract: The ability of biomolecules to exert forces on their surroundings or resist compression from the environment is essential in a variety of biologically relevant contexts. As has been understood for centuries, slender rods can only be compressed so far until they buckle, adopting an intrinsically bent state that may be unable to bear a compressive load. In the low-temperature limit and for a constan… ▽ More The ability of biomolecules to exert forces on their surroundings or resist compression from the environment is essential in a variety of biologically relevant contexts. As has been understood for centuries, slender rods can only be compressed so far until they buckle, adopting an intrinsically bent state that may be unable to bear a compressive load. In the low-temperature limit and for a constant compressive force, Euler buckling theory predicts a sudden transition from a compressed to a bent state in these slender rods. In this paper, we use a mean-field theory to show that if a semiflexible chain is compressed at a finite temperature with a fixed end-to-end distance (permitting fluctuations in the compressive forces), it exhibits a continuous phase transition to a buckled state at a critical level of compression, and we determine a quantitatively accurate prediction of the transverse position distribution function of the midpoint of the chain that indicates the transition. We find the mean compressive forces are non-monotonic as the extension of the filament varies, consistent with the observation that strongly buckled filaments are less able to bear an external load. We also find that for the fixed extension (isometric) ensemble that the buckling transition does not coincide with the local minimum of the mean force (in contrast to Euler buckling). We also show the theory is highly sensitive to fluctuations in length, and that the buckling transition can still be accurately recovered by accounting for those fluctuations. These predictions may be useful in understanding the behavior of filamentous biomolecules compressed by fluctuating forces, relevant in a variety of biological contexts. △ Less

Submitted 16 June, 2022; originally announced June 2022.

Dynamical analysis of the infection status in diverse communities due to COVID-19 using a modified SIR model

Authors: Ian Cooper, Argha Mondal, Chris G. Antonopoulos, Arindam Mishra

Abstract: In this article, we model and study the spread of COVID-19 in Germany, Japan, India and highly impacted states in India, i.e., in Delhi, Maharashtra, West Bengal, Kerala and Karnataka. We consider recorded data published in Worldometers and COVID-19 India websites from April 2020 to July 2021, including periods of interest where these countries and states were hit severely by the pandemic. Our met… ▽ More In this article, we model and study the spread of COVID-19 in Germany, Japan, India and highly impacted states in India, i.e., in Delhi, Maharashtra, West Bengal, Kerala and Karnataka. We consider recorded data published in Worldometers and COVID-19 India websites from April 2020 to July 2021, including periods of interest where these countries and states were hit severely by the pandemic. Our methodology is based on the classic susceptible-infected-removed (SIR) model and can track the evolution of infections in communities, where we (a) allow for the susceptible and infected populations to be reset at times where surges, outbreaks or secondary waves appear in the recorded data sets, (b) consider the parameters in the SIR model that represent the effective transmission and recovery rates to be functions of time and (c) estimate the number of deaths by combining the model solutions with the recorded data sets to approximate them between consecutive surges, outbreaks or secondary waves, providing a more accurate estimate. We report on the status of the current infections in these countries and states, and the infections and deaths in India and Japan. Our model can adapt to the recorded data and can be used to explain them and importantly, to forecast the number of infected, recovered, removed and dead individuals, as well as it can estimate the effective infection and recovery rates as functions of time, assuming an outbreak occurs at a given time. The latter can be used to forecast the future reproduction number and together with the forecast on the number of infected and dead individuals, our approach can be used to suggest the implementation of intervention strategies and mitigation policies to keep at bay the number of infected and dead individuals. This can help reduce the impact of the spread around the world and improve the wellbeing of people. △ Less

Submitted 10 March, 2022; originally announced March 2022.

Comments: 16 pages, 6 figures, 1 table

Probing the low-energy electron-scattering dynamics in liquids with high-harmonic spectroscopy

Authors: Angana Mondal, Ofer Neufeld, Zhong Yin, Zahra Nourbakhsh, Vit Svoboda, Angel Rubio, Nicolas Tancogne-Dejean, Hans Jakob Wörner

Abstract: High-harmonic spectroscopy (HHS) is a nonlinear all-optical technique with inherent attosecond temporal resolution, which has been applied successfully to a broad variety of systems in the gas phase and solid state. Here, we extend HHS to the liquid phase, and uncover the mechanism of high-harmonic generation (HHG) for this phase of matter. Studying HHG over a broad range of wavelengths and intens… ▽ More High-harmonic spectroscopy (HHS) is a nonlinear all-optical technique with inherent attosecond temporal resolution, which has been applied successfully to a broad variety of systems in the gas phase and solid state. Here, we extend HHS to the liquid phase, and uncover the mechanism of high-harmonic generation (HHG) for this phase of matter. Studying HHG over a broad range of wavelengths and intensities, we show that the cut-off ($E_c$) is independent of the wavelength beyond a threshold intensity, and find that $E_c$ is a characteristic property of the studied liquid. We explain these observations within an intuitive semi-classical model based on electron trajectories that are limited by scattering to a characteristic length, which is connected to the electron mean-free path. Our model is validated against rigorous multi-electron time-dependent density-functional theory calculations in, both, supercells of liquid water with periodic boundary conditions, and large clusters of a variety of liquids. These simulations confirm our interpretation and thereby clarify the mechanism of HHG in liquids. Our results demonstrate a new, all-optical access to effective mean-free paths of slow electrons ($\leq$10 eV) in liquids, in a regime that is inaccessible to accurate calculations, but is critical for the understanding of radiation damage to living tissue. Our work also establishes the possibility of resolving sub-femtosecond electron dynamics in liquids, which offers a novel, all-optical approach to attosecond spectroscopy of chemical processes in their native liquid environment. △ Less

Submitted 12 September, 2022; v1 submitted 1 March, 2022; originally announced March 2022.

Comments: 30 pages, 24 figures

Geometric representation of adiabatic distributed-Bragg-reflectors and broadening the photonic bandgap

Authors: Shailja Sharma, Abhishek Mondal, Ritwick Das

Abstract: Adiabatic following has been an widely-employed technique for achieving near-complete population transfer in a `two-level' quantum mechanical system. The theoretical basis, however, could be generalized to a broad class of systems exhibiting SU(2) symmetry. In the present work, we present an analogy of population transfer dynamics of two level atomic system with that of light propagation in a clas… ▽ More Adiabatic following has been an widely-employed technique for achieving near-complete population transfer in a `two-level' quantum mechanical system. The theoretical basis, however, could be generalized to a broad class of systems exhibiting SU(2) symmetry. In the present work, we present an analogy of population transfer dynamics of two level atomic system with that of light propagation in a classical `one-dimensional' photonic crystal, commonly known as distributed-Bragg-reflector (DBR). This formalism facilitates in adapting the idea of adiabatic following, more precisely the rapid adiabatic passage (RAP) which is usually encountered in a broad class of quantum-mechanical systems. We present a chirped DBR configuration in which the adiabatic constraints are satisfied by virtue of optimally chirping the DBR. The reflection spectrum of the configuration exhibit broadening of photonic bandgap (PBG) in addition to a varying degree of suppression of sharp reflection peaks in the transmission band. The intermodal coupling between counter-propagating modes as well as their phase-mismatch, for the DBR configuration, exhibits a longitudinal variation which is usually observed in `Allen-Eberly' scheme of adiabatic population transfer in two-level atomic systems. △ Less

Submitted 10 August, 2021; originally announced August 2021.

Comments: 11 pages, 6 figures. arXiv admin note: substantial text overlap with arXiv:2107.08220

Infrared rainbow trapping via optical Tamm modes in one-dimensional dielectric chirped photonic crystals

Authors: Shailja Sharma, Abhishek Mondal, Ritwick Das

Abstract: The phenomenon of trapping broad spectrum of light is known as `rainbow trapping' and achieved using all-dielectric, hybrid metallo-dielectric or all-metallic configurations. In the latter cases, unavoidable ohmic losses result in sub-picosecond trapped-mode lifetimes. For all practical purposes, novel strategies are required to be devised for trapping and subsequently, releasing broadband electro… ▽ More The phenomenon of trapping broad spectrum of light is known as `rainbow trapping' and achieved using all-dielectric, hybrid metallo-dielectric or all-metallic configurations. In the latter cases, unavoidable ohmic losses result in sub-picosecond trapped-mode lifetimes. For all practical purposes, novel strategies are required to be devised for trapping and subsequently, releasing broadband electromagnetic (em) field with lifetime > 1 ps. We present a rainbow trapping configuration using the excitation of multiple optical Tamm (OT) modes in an one-dimensional chirped photonic crystal (PC) designed for adiabatically coupling counter-propagating modes. In the geometry, the multiple pi phase jumps enable excitation of OT modes when a thin plasmon-active metal is placed adjacent to the terminating layer of chirped-PC (CPC). The strongly localized OT resonances are spatially separated in the chirped-PC geometry and their group-velocities reduce to as low as 0.17c. The time-domain simulations elucidate localization takes place in the dielectric sections of CPC which manifest into lifetimes 3 ps. △ Less

Submitted 10 August, 2021; originally announced August 2021.

Comments: 8 pages, 5 figures

Broadening the photonic bandgap in adiabatic distributed-Bragg-reflectors

Authors: Shailja Sharma, Abhishek Mondal, Ritwick Das

Abstract: Adiabatic following has been an widely-employed technique for achieving near-complete population transfer in a two-level quantum mechanical system. The theoretical basis, however, could be generalized to a broad class of systems exhibiting SU(2) symmetry. In the present work, we present an analogy of population transfer dynamics of two level system with that of light propagation in a classical one… ▽ More Adiabatic following has been an widely-employed technique for achieving near-complete population transfer in a two-level quantum mechanical system. The theoretical basis, however, could be generalized to a broad class of systems exhibiting SU(2) symmetry. In the present work, we present an analogy of population transfer dynamics of two level system with that of light propagation in a classical one-dimensional photonic crystal, commonly known as distributed-Bragg-reflector (DBR).This formalism facilitates in adapting the idea of adiabatic following, more precisely the rapid adiabatic passage (RAP) which is usually encountered in a broad class of quantum-mechanical systems.We present two different DBR configurations in which the adiabatic constraints are obeyed along the DBR length by virtue of optimum design. The reflection spectrum for both the configurations exhibit broadening of photonic bandgap (PBG) in addition to a varying degree of suppression of sharp transmission resonances. The inter modal coupling between counter-propagating modes as well as their phase-mismatch, for both the DBR configuration, exhibits a longitudinal variation which is usually observed in Allen-Eberly scheme of adiabatic population transfer in two-level atomic systems. △ Less

Submitted 17 July, 2021; originally announced July 2021.

Laser structured micro-targets generate MeV electron temperature at $4 \times 10^{16}$ W/cm$^2$

Authors: Angana Mondal, Ratul Sabui, Sheroy Tata, R. M. G. M Trines, S. V. Rahul, Feiyu Li, Soubhik Sarkar, William Trickey, Rakesh Y. Kumar, Debobrata Rajak, John Pasley, Zhengming Sheng, J. Jha, M. Anand, Ram Gopal, A. P. L. Robinson, M. Krishnamurthy

Abstract: Relativistic temperature electrons higher than 0.5 MeV are generated typically with laser intensities of about 10$^{18}$ W/cm$^{2}$. Their generation with high repetition rate lasers that operate at non-relativistic intensities ($\simeq$10$^{16}$ W/cm$^{2}$) is cardinal for the realization of compact, ultra-short, bench-top electron sources. New strategies, capable of exploiting different aspects… ▽ More Relativistic temperature electrons higher than 0.5 MeV are generated typically with laser intensities of about 10$^{18}$ W/cm$^{2}$. Their generation with high repetition rate lasers that operate at non-relativistic intensities ($\simeq$10$^{16}$ W/cm$^{2}$) is cardinal for the realization of compact, ultra-short, bench-top electron sources. New strategies, capable of exploiting different aspects of laser-plasma interaction, are necessary for reducing the required intensity. We report here, a novel technique of dynamic target structuring of microdroplets, capable of generating 200 keV and 1 MeV electron temperatures at 1/100th of the intensity required by ponderomotive scaling($10^{18}$ W/cm$^2$) to generate relativistic electron temperature. Combining the concepts of pre-plasma tailoring, optimized scale length and micro-optics, this method achieves two-plasmon decay boosted electron acceleration with "non-ideal" ultrashort (25 fs) pulses at $4\times10^{16}$ W/cm$^2$, only. With shot repeatability at kHz, this precise in-situ targetry produces directed, imaging quality beam-like electron emission up to 6 MeV with milli-joule class lasers, that can be transformational for time-resolved, microscopic studies in all fields of science. △ Less

Submitted 21 July, 2021; v1 submitted 8 July, 2021; originally announced July 2021.

Comments: Main text- 9 pages, 4 figures. Comments are welcome

Pulse-duration dependence of saturable and reverse saturable absorption in ZnCo2O4 microflowers

Authors: Pritam Khan, Rajesh Kumar Yadav, Anirban Mondal, Chandra Sekhar Rout, K. V. Adarsh

Abstract: We employed open-aperture Z-scan technique to unveil the third-order optical nonlinearity in ZnCo2O4 (ZCO) microflowers. Our results indicate that intersystem crossing (ISC) lifetime can be used as simple tool to demonstrate remarkably contrasting optical nonlinearity in ZCO. Ultrafast transient absorption measurements reveal that ISC from singlet to triplet state takes place in 5 ps. For femtosec… ▽ More We employed open-aperture Z-scan technique to unveil the third-order optical nonlinearity in ZnCo2O4 (ZCO) microflowers. Our results indicate that intersystem crossing (ISC) lifetime can be used as simple tool to demonstrate remarkably contrasting optical nonlinearity in ZCO. Ultrafast transient absorption measurements reveal that ISC from singlet to triplet state takes place in 5 ps. For femtosecond laser pulses, when the pulse duration is shorter than ISC lifetime, saturable absorption (SA) takes place for all intensities. On the contrary, when the pulse duration is longer than ISC for nanosecond excitation, we observe transition from SA to reverse SA (RSA) at higher intensities via excited-state absorption. We envisage that benefiting from SA and RSA, ZCO emerges as potential candidate for mode locking and optical limiting devices. △ Less

Submitted 2 March, 2021; v1 submitted 28 September, 2020; originally announced September 2020.

Comments: 19 pages, 5 figures, 1 table

Dynamic tracking with model-based forecasting for the spread of the COVID-19 pandemic

Authors: Ian Cooper, Argha Mondal, Chris G. Antonopoulos

Abstract: In this paper, a susceptible-infected-removed (SIR) model has been used to track the evolution of the spread of the COVID-19 virus in four countries of interest. In particular, the epidemic model, that depends on some basic characteristics, has been applied to model the time evolution of the disease in Italy, India, South Korea and Iran. The economic, social and health consequences of the spread o… ▽ More In this paper, a susceptible-infected-removed (SIR) model has been used to track the evolution of the spread of the COVID-19 virus in four countries of interest. In particular, the epidemic model, that depends on some basic characteristics, has been applied to model the time evolution of the disease in Italy, India, South Korea and Iran. The economic, social and health consequences of the spread of the virus have been cataclysmic. Hence, it is essential that available mathematical models can be developed and used for the comparison to be made between published data sets and model predictions. The predictions estimated from the SIR model here, can be used in both the qualitative and quantitative analysis of the spread. It gives an insight into the spread of the virus that the published data alone cannot do by updating them and the model on a daily basis. For example, it is possible to detect the early onset of a spike in infections or the development of a second wave using our modeling approach. We considered data from March to June, 2020, when different communities are severely affected. We demonstrate predictions depending on the model's parameters related to the spread of COVID-19 until September 2020. By comparing the published data and model results, we conclude that in this way, it may be possible to better reflect the success or failure of the adequate measures implemented by governments and individuals to mitigate and control the current pandemic. △ Less

Submitted 4 July, 2020; originally announced July 2020.

Comments: 17 pages, 13 figures

A SIR model assumption for the spread of COVID-19 in different communities

Authors: Ian Cooper, Argha Mondal, Chris G. Antonopoulos

Abstract: In this paper, we study the effectiveness of the modelling approach on the pandemic due to the spreading of the novel COVID-19 disease and develop a susceptible-infected-removed (SIR) model that provides a theoretical framework to investigate its spread within a community. Here, the model is based upon the well-known susceptible-infected-removed (SIR) model with the difference that a total populat… ▽ More In this paper, we study the effectiveness of the modelling approach on the pandemic due to the spreading of the novel COVID-19 disease and develop a susceptible-infected-removed (SIR) model that provides a theoretical framework to investigate its spread within a community. Here, the model is based upon the well-known susceptible-infected-removed (SIR) model with the difference that a total population is not defined or kept constant per se and the number of susceptible individuals does not decline monotonically. To the contrary, as we show herein, it can be increased in surge periods! In particular, we investigate the time evolution of different populations and monitor diverse significant parameters for the spread of the disease in various communities, represented by countries and the state of Texas in the USA. The SIR model can provide us with insights and predictions of the spread of the virus in communities that the recorded data alone cannot. Our work shows the importance of modelling the spread of COVID-19 by the SIR model that we propose here, as it can help to assess the impact of the disease by offering valuable predictions. Our analysis takes into account data from January to June, 2020, the period that contains the data before and during the implementation of strict and control measures. We propose predictions on various parameters related to the spread of COVID-19 and on the number of susceptible, infected and removed populations until September 2020. By comparing the recorded data with the data from our modelling approaches, we deduce that the spread of COVID-19 can be under control in all communities considered, if proper restrictions and strong policies are implemented to control the infection rates early from the spread of the disease. △ Less

Submitted 18 June, 2020; originally announced June 2020.

Comments: 18 pages, 17 figures

Emergence of mixed mode oscillations in random networks of diverse excitable neurons: the role of neighbors and electrical coupling

Authors: Subrata Ghosh, Argha Mondal, Peng Ji, Arindam Mishra, Syamal Kumar Dana, Chris G. Antonopoulos, Chittaranjan Hens

Abstract: In this paper, we focus on the emergence of diverse neuronal oscillations arising in a mixed population of neurons with different excitability properties. These properties produce mixed mode oscillations (MMOs) characterized by the combination of large amplitudes and alternate subthreshold or small amplitude oscillations. Considering the biophysically plausible, Izhikevich neuron model, we demonst… ▽ More In this paper, we focus on the emergence of diverse neuronal oscillations arising in a mixed population of neurons with different excitability properties. These properties produce mixed mode oscillations (MMOs) characterized by the combination of large amplitudes and alternate subthreshold or small amplitude oscillations. Considering the biophysically plausible, Izhikevich neuron model, we demonstrate that various MMOs, including MMBOs (mixed mode bursting oscillations) and synchronized tonic spiking appear in a randomly connected network of neurons, where a fraction of them is in a quiescent (silent) state and the rest in self-oscillatory (firing) states. We show that MMOs and other patterns of neural activity depend on the number of oscillatory neighbors of quiescent nodes and on electrical coupling strengths. Our results are verified by constructing a reduced-order network model and supported by systematic bifurcation diagrams as well as for a small-world network. Our results suggest that, for weak couplings, MMOs appear due to the de-synchronization of a large number of quiescent neurons in the networks. The quiescent neurons together with the firing neurons produce high frequency oscillations and bursting activity. The overarching goal is to uncover a favorable network architecture and suitable parameter spaces where Izhikevich model neurons generate diverse responses ranging from MMOs to tonic spiking. △ Less

Submitted 5 May, 2020; originally announced May 2020.

Comments: Accepted in Frontiers in Computational Neuroscience

Direct measurement of interfacial Dzyaloshinskii-Moriya interaction at the MoS$_{\rm 2}$/Ni$_{80}$Fe$_{20}$ interface

Authors: Akash Kumar, Avinash Kumar Chaurasiya, Niru Chowdhury, Amrit Kumar Mondal, Rajni Bansal, Arun Barvat, Suraj P Khanna, Prabir Pal, Sujeet Chaudhary, Anjan Barman, P. K. Muduli

Abstract: We report on a direct measurement of sizable interfacial Dzyaloshinskii-Moriya interaction (iDMI) at the interface of two-dimensional transition metal dichalcogenide (2D-TMD), MoS$_{\rm 2}$ and Ni$_{80}$Fe$_{20}$ (Py) using Brillouin light scattering spectroscopy. A clear asymmetry in spin-wave dispersion is measured in MoS$_{\rm 2}$/Py/Ta, while no such asymmetry is detected in the reference Py/T… ▽ More We report on a direct measurement of sizable interfacial Dzyaloshinskii-Moriya interaction (iDMI) at the interface of two-dimensional transition metal dichalcogenide (2D-TMD), MoS$_{\rm 2}$ and Ni$_{80}$Fe$_{20}$ (Py) using Brillouin light scattering spectroscopy. A clear asymmetry in spin-wave dispersion is measured in MoS$_{\rm 2}$/Py/Ta, while no such asymmetry is detected in the reference Py/Ta system. A linear scaling of the DMI constant with the inverse of Py thickness indicates the interfacial origin of the observed DMI. We further observe an enhancement of DMI constant in three to four layer MoS$_{\rm 2}$/Py system (by 56$\%$) as compared to 2 layer MoS$_{\rm 2}$/Py which is caused by a higher density of MoO$_{\rm 3}$ defect species in the case of three to four layer MoS$_{\rm 2}$. The results open possibilities of spin-orbitronic applications utilizing the 2D-TMD based heterostructures. △ Less

Submitted 15 June, 2020; v1 submitted 14 April, 2020; originally announced April 2020.

Journal ref: Appl. Phys. Lett. 116, 232405 (2020)

Effect of magnetic field on the laterally colliding plasma plumes

Authors: Alamgir Mondal, R. K. Singh, Vishnu Chaudhari, H. C. Joshi

Abstract: An experimental investigation of laser produced colliding plasma of aluminium target in the presence of external magnetic field in vacuum is done. Characteristic parameters and line emission of plasma plume in the presence of magnetic field are compared with those for field free case. Axial expansion of the plasma is slowed down in the presence of magnetic field as compared to the field free case.… ▽ More An experimental investigation of laser produced colliding plasma of aluminium target in the presence of external magnetic field in vacuum is done. Characteristic parameters and line emission of plasma plume in the presence of magnetic field are compared with those for field free case. Axial expansion of the plasma is slowed down in the presence of magnetic field as compared to the field free case. Contrary to the field free case no sharp interaction zone is observed. Higher electron temperature and increased ionic line emission from singly as well as doubly ionized aluminium can be attributed to the Joule heating phenomenon. △ Less

Submitted 11 June, 2020; v1 submitted 3 October, 2019; originally announced October 2019.

Comments: 5 pages, 6 figures, Journal article

The influence of impurities on the charge carrier mobility of small molecule organic semiconductors

Authors: Pascal Friederich, Artem Fediai, Jing Li, Anirban Mondal, Naresh B. Kotadiya, Franz Symalla, Gert-Jan A. H. Wetzelaer, Denis Andrienko, Xavier Blase, David Beljonne, Paul W. M. Blom, Jean-Luc Brédas, Wolfgang Wenzel

Abstract: Amorphous organic semiconductors based on small molecules and polymers are used in many applications, most prominently organic light emitting diodes (OLEDs) and organic solar cells. Impurities and charge traps are omnipresent in most currently available organic semiconductors and limit charge transport and thus device efficiency. The microscopic cause as well as the chemical nature of these traps… ▽ More Amorphous organic semiconductors based on small molecules and polymers are used in many applications, most prominently organic light emitting diodes (OLEDs) and organic solar cells. Impurities and charge traps are omnipresent in most currently available organic semiconductors and limit charge transport and thus device efficiency. The microscopic cause as well as the chemical nature of these traps are presently not well understood. Using a multiscale model we characterize the influence of impurities on the density of states and charge transport in small-molecule amorphous organic semiconductors. We use the model to quantitatively describe the influence of water molecules and water-oxygen complexes on the electron and hole mobilities. These species are seen to impact the shape of the density of states and to act as explicit charge traps within the energy gap. Our results show that trap states introduced by molecular oxygen can be deep enough to limit the electron mobility in widely used materials. △ Less

Submitted 8 November, 2020; v1 submitted 30 August, 2019; originally announced August 2019.

Comments: 13 pages + SI, 7 figures + TOC-graphic + 2 figures in SI

Compositional analysis of laser produced plasma plume in front and back ablation geometries

Authors: Alamgir Mondal, R. K. Singh, H. C. Joshi

Abstract: Composition analysis of LiF-C thin film for neutral and ionic contributions in Front Ablation (FA) and Back Ablation (BA) geometries in vacuum and 2\times10-1 mbar argon has been done. Temporal evolution of ionic to neutral ratio and neutral abundance for both the geometries has been estimated. For neutral abundance, two approaches viz Atomic Data and Analysis Structure (ADAS) analysis as well as… ▽ More Composition analysis of LiF-C thin film for neutral and ionic contributions in Front Ablation (FA) and Back Ablation (BA) geometries in vacuum and 2\times10-1 mbar argon has been done. Temporal evolution of ionic to neutral ratio and neutral abundance for both the geometries has been estimated. For neutral abundance, two approaches viz Atomic Data and Analysis Structure (ADAS) analysis as well as integrated intensity ratio of Li I 670.1 nm and Li I 610.3 nm lines assuming LTE conditions are explored. The present attempt will be interesting from the view point of understanding the evolution of plasma composition in various geometries/configurations of laser ablation which has important implications in various applications e.g. pulsed laser deposition and laser cleaning. △ Less

Submitted 17 January, 2019; originally announced January 2019.

Comments: This manuscript is of 17 pages and has 12 figures

Network models for characterization of trabecular bone

Authors: Avik Mondal, Chantal Nguyen, Xiao Ma, Ahmed E. Elbanna, Jean M. Carlson

Abstract: Trabecular bone is a lightweight, compliant material organized as a web of struts and rods (trabeculae) that erode with age and the onset of bone diseases like osteoporosis, leading to increased fracture risk. The traditional diagnostic marker of osteoporosis, bone mineral density (BMD), has been shown in ex vivo experiments to correlate poorly with fracture resistance when considered on its own,… ▽ More Trabecular bone is a lightweight, compliant material organized as a web of struts and rods (trabeculae) that erode with age and the onset of bone diseases like osteoporosis, leading to increased fracture risk. The traditional diagnostic marker of osteoporosis, bone mineral density (BMD), has been shown in ex vivo experiments to correlate poorly with fracture resistance when considered on its own, while structural features in conjunction with BMD can explain more of the variation in trabecular bone strength. We develop a network-based model of trabecular bone by creating graphs from micro-computed tomography images of human bone, with weighted links representing trabeculae and nodes representing branch points. These graphs enable calculation of quantitative network metrics to characterize trabecular structure. We also create finite element models of the networks in which each link is represented by a beam, facilitating analysis of the mechanical response of the bone samples to simulated loading. We examine the structural and mechanical properties of trabecular bone at the scale of individual trabeculae (of order 0.1 mm) and at the scale of selected volumes of interest (approximately a few mm), referred to as VOIs. At the VOI scale, we find significant correlations between the stiffness of VOIs and 10 different structural metrics. Individually, the volume fraction of each VOI is most strongly correlated to the stiffness of the VOI. We use multiple linear regression to identify the smallest subset of variables needed to capture the variation in stiffness. In a linear fit, we find that node degree, weighted node degree, Z-orientation, weighted Z-orientation, trabecular spacing, link length, and the number of links are the structural metrics that are most significant (p < 0.05) in capturing the variation of stiffness in trabecular networks. △ Less

Submitted 24 June, 2019; v1 submitted 31 October, 2018; originally announced November 2018.

Journal ref: Phys. Rev. E 99, 042406 (2019)

Ideal gas with a varying (negative absolute) temperature: An alternative to dark energy?

Authors: Subhajit Saha, Anindita Mondal, Christian Corda

Abstract: The present work is an attempt to investigate whether the evolutionary history of the Universe from the offset of inflation can be described by assuming the cosmic fluid to be an ideal gas with a specific gas constant but a varying negative absolute temperature (NAT). The motivation of this work is to search for an alternative to the "exotic" and "supernatural" dark energy (DE). In fact, the NAT w… ▽ More The present work is an attempt to investigate whether the evolutionary history of the Universe from the offset of inflation can be described by assuming the cosmic fluid to be an ideal gas with a specific gas constant but a varying negative absolute temperature (NAT). The motivation of this work is to search for an alternative to the "exotic" and "supernatural" dark energy (DE). In fact, the NAT works as an "effective quintessence" and there is need to deal neither with exotic matter like DE nor with modified gravity theories. For the sake of completeness, we release some clarifications on NATs in Section 3 of the paper. △ Less

Submitted 26 January, 2018; originally announced February 2018.

Comments: 10 pages, accepted for publication in International Journal of Theoretical Physics

Journal ref: International Journal of Theoretical Physics 57, 1417 (2018)

Extruded Mg based hybrid composite alloys studied by longitudinal impression creep

Authors: A. K. Mondal, S. Kumar

Abstract: The creep behaviour of a creep-resistant AE42 magnesium alloy reinforced with Saffil short fibres and SiC particulates in various combinations has been examined in the longitudinal direction, i.e., the plane containing random fibre orientation was parallel to the loading direction, in the temperature range of 175-300 C at the stress levels ranging from 60 to 140 MPa using impression creep test tec… ▽ More The creep behaviour of a creep-resistant AE42 magnesium alloy reinforced with Saffil short fibres and SiC particulates in various combinations has been examined in the longitudinal direction, i.e., the plane containing random fibre orientation was parallel to the loading direction, in the temperature range of 175-300 C at the stress levels ranging from 60 to 140 MPa using impression creep test technique. At 175 C, normal creep behaviour, i.e., strain rate decreasing with strain and then reaching a steady state, is observed at all the stresses employed. At 240 C, normal creep behaviour is observed up to 80 MPa and reverse creep behaviour, i.e., strain rate increasing with strain, then reaching a steady state and again decreasing, is observed above that stress. At 300 C, reverse creep behaviour is observed at all the stresses employed. This pattern remains the same for all the composites. The reverse creep behaviour is found to be associated with the fibre breakage. The stress exponent is found to be very high for all the composites. However, after taking the threshold stress into account, the stress exponent varies from 3.9 to 7.0, which suggests viscous glide and dislocation climb being the dominant creep mechanisms. The apparent activation energy Qc was not calculated due to insufficient data at any stress level either for normal or reverse creep behaviour. The creep resistance of the hybrid composites is found to be comparable to that of the composite reinforced with 20% Saffil short fibres at all the temperatures and stress levels investigated. △ Less

Submitted 28 April, 2017; v1 submitted 17 April, 2017; originally announced April 2017.

Comments: 11 pages, 10 figures. Corrected typographical errors and updated title and conclusions

Journal ref: Composites Science and Technology, 68, 3251 (2008)

Long-term stability test of a triple GEM detector

Authors: R. P. Adak, S. Biswas, S. Das, D. Ghosal, S. K. Ghosh, A. Mondal, D. Nag, T. K. Nayak, R. N. Patra, S. K Prasad, S. Raha, P. K. Sahu, S. Sahu, S. Swain

Abstract: The main aim of the study is to perform the long-term stability test of gain of the single mask triple GEM detector. A simple method is used for this long- term stability test using a radioactive X-ray source with high activity. The test is continued till accumulation of charge per unit area > 12.0 mC/mm2. The details of the chamber fabrication, the test set-up, the method of measurement and the t… ▽ More The main aim of the study is to perform the long-term stability test of gain of the single mask triple GEM detector. A simple method is used for this long- term stability test using a radioactive X-ray source with high activity. The test is continued till accumulation of charge per unit area > 12.0 mC/mm2. The details of the chamber fabrication, the test set-up, the method of measurement and the test results are presented in this paper. △ Less

Submitted 30 July, 2016; originally announced August 2016.

Comments: 8 pages, 5 figures