-
Quantum simulation of Burgers turbulence: Nonlinear transformation and direct evaluation of statistical quantities
Authors:
Fumio Uchida,
Koichi Miyamoto,
Soichiro Yamazaki,
Kotaro Fujisawa,
Naoki Yoshida
Abstract:
Fault-tolerant quantum computing is a promising technology to solve linear partial differential equations that are classically demanding to integrate. It is still challenging to solve non-linear equations in fluid dynamics, such as the Burgers equation, using quantum computers. We propose a novel quantum algorithm to solve the Burgers equation. With the Cole-Hopf transformation that maps the fluid…
▽ More
Fault-tolerant quantum computing is a promising technology to solve linear partial differential equations that are classically demanding to integrate. It is still challenging to solve non-linear equations in fluid dynamics, such as the Burgers equation, using quantum computers. We propose a novel quantum algorithm to solve the Burgers equation. With the Cole-Hopf transformation that maps the fluid velocity field $u$ to a new field $ψ$, we apply a sequence of quantum gates to solve the resulting linear equation and obtain the quantum state $\vertψ\rangle$ that encodes the solution $ψ$. We also propose an efficient way to extract stochastic properties of $u$, namely the multi-point functions of $u$, from the quantum state of $\vertψ\rangle$. Our algorithm offers an exponential advantage over the classical finite difference method in terms of the number of spatial grids when a perturbativity condition in the information-extracting step is met.
△ Less
Submitted 22 December, 2024;
originally announced December 2024.
-
Response of negative ion beamlet to RF field in beam extraction region
Authors:
Kenichi Nagaoka,
Haruhisa Nakano,
Taiga Hamajima,
Ryoya Nakamoto,
Katsuyoshi Tsumori,
Masaki Osakabe,
Katsunori Ikeda,
Masashi Kisaki,
Kenji Miyamoto,
Kazunori Takahashi,
Ursel Fantz
Abstract:
Beam-focusing characteristics of negative ion beams have been experimentally investigated with a superimposition of a controlled perturbation of RF field in a filament-arc discharge negative ion source. Oscillations of a negative-ion beamlet width and axis responding to the RF perturbation were observed, which may be a cause of the larger beam divergence angle of the RF negative ion source for ITE…
▽ More
Beam-focusing characteristics of negative ion beams have been experimentally investigated with a superimposition of a controlled perturbation of RF field in a filament-arc discharge negative ion source. Oscillations of a negative-ion beamlet width and axis responding to the RF perturbation were observed, which may be a cause of the larger beam divergence angle of the RF negative ion source for ITER. It is pointed out that the oscillation of the beamlet width depends on the perveance and on the RF frequency such that the oscillation is suppressed at perveance-matched conditions and at low RF frequency.
△ Less
Submitted 26 August, 2024; v1 submitted 25 December, 2023;
originally announced December 2023.
-
Quantum algorithm for collisionless Boltzmann simulation of self-gravitating systems
Authors:
Soichiro Yamazaki,
Fumio Uchida,
Kotaro Fujisawa,
Koichi Miyamoto,
Naoki Yoshida
Abstract:
The collisionless Boltzmann equation (CBE) is a fundamental equation that governs the dynamics of a broad range of astrophysical systems from space plasma to star clusters and galaxies. It is computationally expensive to integrate the CBE directly in a multi-dimensional phase space, and thus the applications to realistic astrophysical problems have been limited so far. Recently, Todorova & Steijl…
▽ More
The collisionless Boltzmann equation (CBE) is a fundamental equation that governs the dynamics of a broad range of astrophysical systems from space plasma to star clusters and galaxies. It is computationally expensive to integrate the CBE directly in a multi-dimensional phase space, and thus the applications to realistic astrophysical problems have been limited so far. Recently, Todorova & Steijl (2020) proposed an efficient quantum algorithm to solve the CBE with significantly reduced computational complexity. We extend the algorithm to perform quantum simulations of self-gravitating systems, incorporating the method to calculate gravity with the major Fourier modes of the density distribution extracted from the solution-encoding quantum state. Our method improves the dependency of time and space complexities on Nv , the number of grid points in each velocity coordinate, compared to the classical simulation methods. We then conduct some numerical demonstrations of our method. We first run a 1+1 dimensional test calculation of free streaming motion on 64*64 grids using 13 simulated qubits and validate our method. We then perform simulations of Jeans collapse, and compare the result with analytic and linear theory calculations. It will thus allow us to perform large-scale CBE simulations on future quantum computers.
△ Less
Submitted 28 December, 2024; v1 submitted 29 March, 2023;
originally announced March 2023.
-
Pulse Shape Discrimination of CsI(Tl) with a Photomultiplier Tube and MPPCs
Authors:
Nguyen V. H. Viet,
M. Nomachi,
K. Takahisa,
T. Shima,
B. T. Khai,
R. Takaishi,
K. Miyamoto
Abstract:
In this study, we evaluate and compare the pulse shape discrimination (PSD) performance of multipixel photon counters (MPPCs, also known as silicon photomultiphers - SiPMs) with that of a typical photomultiplier tube (PMT) when testing using CsI(Tl) scintillators. We use the charge comparison method, whereby we discriminate different types of particles by the ratio of charges integrated within two…
▽ More
In this study, we evaluate and compare the pulse shape discrimination (PSD) performance of multipixel photon counters (MPPCs, also known as silicon photomultiphers - SiPMs) with that of a typical photomultiplier tube (PMT) when testing using CsI(Tl) scintillators. We use the charge comparison method, whereby we discriminate different types of particles by the ratio of charges integrated within two time-gates (the delayed part and the entire digitized waveform). For a satisfactory PSD performance, a setup should generate many photoelectrons (p.e.) and collect their charges efficiently. The PMT setup generates more p.e. than the MPPC setup does. With the same digitizer and the same long time-gate (the entire digitized waveform), the PMT setup is also better in charge collection. Therefore, the PMT setup demonstrates better PSD performance. We subsequently test the MPPC setup using a new data acquisition (DAQ) system. Using this new DAQ, the long time-gate is extended by nearly four times the length when using the previous digitizer. With this longer time-gate, we collect more p.e. at the tail part of the pulse and almost all the charges of the total collected p.e. Thus, the PSD performance of the MPPC setup is improved significantly. This study also provides an estimation of the short time-gate (the delayed part of the digitized waveform) that can give a satisfactory PSD performance without an extensive analysis to optimize this gate.
△ Less
Submitted 2 October, 2020;
originally announced October 2020.
-
Broadband high-resolution terahertz single-pixel imaging
Authors:
Adam Vallés,
Jiahuan He,
Seigo Ohno,
Takashige Omatsu,
Katsuhiko Miyamoto
Abstract:
We report a simple single-pixel imaging system with a low mean squared error in the entire terahertz frequency region (3-13 THz) that employs a thin metallic ring with a series of directly perforated random masks and a subpixel mask digitization technique. This imaging system produces high pixel resolution reconstructed images, up to 1200 x 1200 pixels, and imaging area of 32 mm x 32 mm. It can be…
▽ More
We report a simple single-pixel imaging system with a low mean squared error in the entire terahertz frequency region (3-13 THz) that employs a thin metallic ring with a series of directly perforated random masks and a subpixel mask digitization technique. This imaging system produces high pixel resolution reconstructed images, up to 1200 x 1200 pixels, and imaging area of 32 mm x 32 mm. It can be extended to develop advanced imaging systems in the near-ultraviolet to terahertz region.
△ Less
Submitted 29 July, 2020; v1 submitted 10 June, 2020;
originally announced June 2020.
-
Generation of high-quality terahertz OAM mode based on soft-aperture difference frequency generation
Authors:
Katsuhiko Miyamoto,
Kazuki Sano,
Takahiro Miyakawa,
Hiromasa Niinomi,
Kohei Toyoda,
Adam Valles,
Takashige Omatsu
Abstract:
We demonstrate the generation of high-quality tunable terahertz (THz) vortices in an eigenmode by employing soft-aperture difference frequency generation of a vortex output and a Gaussian mode. The generated THz vortex output exhibits a high-quality orbital angular momentum (OAM) mode with a topological charge of $\ell_{THz}=\pm1$ in a frequency range of 2-6 THz. The maximum average power of the T…
▽ More
We demonstrate the generation of high-quality tunable terahertz (THz) vortices in an eigenmode by employing soft-aperture difference frequency generation of a vortex output and a Gaussian mode. The generated THz vortex output exhibits a high-quality orbital angular momentum (OAM) mode with a topological charge of $\ell_{THz}=\pm1$ in a frequency range of 2-6 THz. The maximum average power of the THz vortex output obtained was ~3.3 $μ$W at 4 THz.
△ Less
Submitted 18 December, 2019;
originally announced December 2019.
-
Generation of coupled orbital angular momentum modes from an optical vortex parametric laser source
Authors:
Roukuya Mamuti,
Shunsuke Goto,
Katsuhiko Miyamoto,
Takashige Omatsu
Abstract:
We report on the generation of flower (wheel) modes, which manifest coupled orbital angular momentum (OAM) modes, from a vortex pumped optical parametric oscillator simply by employing a pump source with a short temporal coherence time. This vortex oscillator was also developed to generate a further higher-order vortex signal output with $l_s=2-4$ by replacement of the pump source with a longer co…
▽ More
We report on the generation of flower (wheel) modes, which manifest coupled orbital angular momentum (OAM) modes, from a vortex pumped optical parametric oscillator simply by employing a pump source with a short temporal coherence time. This vortex oscillator was also developed to generate a further higher-order vortex signal output with $l_s=2-4$ by replacement of the pump source with a longer coherence time. The signal and idler outputs were tuned within wavelength ranges of 745-955 nm and 1200-1855 nm, respectively. The maximum signal output energy of 1.2 mJ was measured with an optical efficiency of 15.6%.
△ Less
Submitted 10 December, 2019;
originally announced December 2019.
-
Optical vortex-induced forward mass transfer: Manifestation of helical trajectory of optical vortex
Authors:
Ryosuke Nakamura,
Haruki Kawaguchi,
Muneaki Iwata,
Akihiro Kaneko,
Ryo Nagura,
Satoyuki Kawano,
Kohei Toyoda,
Katsuhiko Miyamoto,
Takashige Omatsu
Abstract:
The orbital angular momentum of an optical vortex field is found to twist high viscosity donor material to form a micron-scale 'spin jet'. This unique phenomenon manifests the helical trajectory of the optical vortex. Going beyond both the conventional ink jet and laser induced forward mass transfer (LIFT) patterning technologies, it also offers the formation and ejection of a micron-scale 'spin j…
▽ More
The orbital angular momentum of an optical vortex field is found to twist high viscosity donor material to form a micron-scale 'spin jet'. This unique phenomenon manifests the helical trajectory of the optical vortex. Going beyond both the conventional ink jet and laser induced forward mass transfer (LIFT) patterning technologies, it also offers the formation and ejection of a micron-scale 'spin jet' of the donor material even with an ultrahigh viscosity of 4 Pas. This optical vortex laser induced forward mass transfer (OV-LIFT) patterning technique will enable the development of next generation printed photonic/electric/spintronic circuits formed of ultrahigh viscosity donor dots containing functional nanoparticles, such as quantum dots, metallic particles and magnetic ferrite particles, with ultrahigh spatial resolution. It can also potentially explore a completely new needleless drug injection.
△ Less
Submitted 9 December, 2019;
originally announced December 2019.
-
Water Facilitated Electrochemical Reduction of CO2 on Cobalt-Porphyrin Catalysts
Authors:
Kaito Miyamoto,
Ryoji Asahi
Abstract:
Cobalt-porphyrin catalyzed reductive decomposition of CO2 to CO is investigated based on Koper's water facilitated CO2 reduction mechanism using a simple but accurate protocol based on thermodynamics. In our protocol, accurate predictions of standard redox potentials and free energy differences are achieved by combining strengths of both density functional theory and experimental observations. Wit…
▽ More
Cobalt-porphyrin catalyzed reductive decomposition of CO2 to CO is investigated based on Koper's water facilitated CO2 reduction mechanism using a simple but accurate protocol based on thermodynamics. In our protocol, accurate predictions of standard redox potentials and free energy differences are achieved by combining strengths of both density functional theory and experimental observations. With the proposed protocol, we found that the proton transfer from H2O takes place at -0.80 V vs. RHE at pH=3 through a concerted pathway and, as a result, the key intermediate for the CO generation, i.e., [CoP-COOH]- is formed. Since the redox potential of the proton transfer agrees well with experimentally observed CO2 reduction potential, we successfully clarified that H2O plays an important role in the reductive decomposition of CO2 to CO. This result is valuable not only for understanding the cobalt-porphyrin catalyzed reductive decomposition of CO2 but also as a guide for the development of new catalysts.
△ Less
Submitted 3 May, 2019; v1 submitted 26 June, 2018;
originally announced June 2018.
-
Experimental observation of node-line-like surface states in LaBi
Authors:
Baojie Feng,
Jin Cao,
Meng Yang,
Ya Feng,
Shilong Wu,
Botao Fu,
Masashi Arita,
Koji Miyamoto,
Shaolong He,
Kenya Shimada,
Youguo Shi,
Taichi Okuda,
Yugui Yao
Abstract:
In a Dirac nodal line semimetal, the bulk conduction and valence bands touch at extended lines in the Brillouin zone. To date, most of the theoretically predicted and experimentally discovered nodal lines derive from the bulk bands of two- and three-dimensional materials. Here, based on combined angle-resolved photoemission spectroscopy measurements and first-principles calculations, we report the…
▽ More
In a Dirac nodal line semimetal, the bulk conduction and valence bands touch at extended lines in the Brillouin zone. To date, most of the theoretically predicted and experimentally discovered nodal lines derive from the bulk bands of two- and three-dimensional materials. Here, based on combined angle-resolved photoemission spectroscopy measurements and first-principles calculations, we report the discovery of node-line-like surface states on the (001) surface of LaBi. These bands derive from the topological surface states of LaBi and bridge the band gap opened by spin-orbit coupling and band inversion. Our first-principles calculations reveal that these "nodal lines" have a tiny gap, which is beyond typical experimental resolution. These results may provide important information to understand the extraordinary physical properties of LaBi, such as the extremely large magnetoresistance and resistivity plateau.
△ Less
Submitted 20 February, 2018; v1 submitted 29 November, 2017;
originally announced November 2017.
-
Extremely scalable algorithm for 10$^8$-atom quantum material simulation on the full system of the K computer
Authors:
Takeo Hoshi,
Hiroto Imachi,
Kiyoshi Kumahata,
Masaaki Terai,
Kengo Miyamoto,
Kazuo Minami,
Fumiyoshi Shoji
Abstract:
An extremely scalable linear-algebraic algorithm was developed for quantum material simulation (electronic state calculation) with 10$^8$ atoms or 100-nm-scale materials. The mathematical foundation is generalized shifted linear equations ((zB - A) x = b), instead of conventional generalized eigenvalue equations. The method has a highly parallelizable mathematical structure. The fundamental theory…
▽ More
An extremely scalable linear-algebraic algorithm was developed for quantum material simulation (electronic state calculation) with 10$^8$ atoms or 100-nm-scale materials. The mathematical foundation is generalized shifted linear equations ((zB - A) x = b), instead of conventional generalized eigenvalue equations. The method has a highly parallelizable mathematical structure. The fundamental theory is mathematical and is applicable also to other scientific fields. The benchmark shows an extreme strong scaling and a qualified time-to-solution on the full system of the K computer. The method was demonstrated in a real material research for ultra-flexible (organic) devices, key devices of next-generation IoT products. The present paper shows that an innovative scalable algorithm for a real research can appear by the co-design among application, algorithm and architecture.
△ Less
Submitted 7 October, 2016; v1 submitted 27 September, 2016;
originally announced September 2016.
-
Twisted Radiation by Electrons in Spiral Motion
Authors:
M. Katoh,
M. Fujimoto,
N. S. Mirian,
T. Konomi,
Y. Taira,
T. Kaneyasu,
M. Hosaka,
N. Yamamoto,
A. Mochihashi,
Y. Takashima,
K. Kuroda,
A. Miyamoto,
K. Miyamoto,
S. Sasaki
Abstract:
We theoretically show that a single free electron in circular/spiral motion radiates an electromagnetic wave possessing helical phase structure and carrying orbital angular momentum. We experimentally demonstrate it by double-slit diffraction on radiation from relativistic electrons in spiral motion. We show that twisted photons should be created naturally by cyclotron/synchrotron radiations or Co…
▽ More
We theoretically show that a single free electron in circular/spiral motion radiates an electromagnetic wave possessing helical phase structure and carrying orbital angular momentum. We experimentally demonstrate it by double-slit diffraction on radiation from relativistic electrons in spiral motion. We show that twisted photons should be created naturally by cyclotron/synchrotron radiations or Compton scatterings in various situations in cosmic space. We propose promising laboratory vortex photon sources in various wavelengths ranging from radio wave to gamma-rays.
△ Less
Submitted 15 September, 2016; v1 submitted 12 September, 2016;
originally announced September 2016.
-
Distillation of Liquid Xenon to Remove Krypton
Authors:
K. Abe,
J. Hosaka,
T. Iida,
M. Ikeda,
K. Kobayashi,
Y. Koshio,
A. Minamino,
M. Miura,
S. Moriyama,
M. Nakahata,
Y. Nakajima,
T. Namba,
H. Ogawa,
H. Sekiya,
M. Shiozawa,
Y. Suzuki,
A. Takeda,
Y. Takeuchi,
K. Ueshima,
M. Yamashita,
K. Kaneyuki,
Y. Ebizuka,
J. Kikuchi,
A. Ota,
S. Suzuki
, et al. (24 additional authors not shown)
Abstract:
A high performance distillation system to remove krypton from xenon was constructed, and a purity level of Kr/Xe = $\sim 3 \times 10^{-12}$ was achieved. This development is crucial in facilitating high sensitivity low background experiments such as the search for dark matter in the universe.
A high performance distillation system to remove krypton from xenon was constructed, and a purity level of Kr/Xe = $\sim 3 \times 10^{-12}$ was achieved. This development is crucial in facilitating high sensitivity low background experiments such as the search for dark matter in the universe.
△ Less
Submitted 2 February, 2009; v1 submitted 25 September, 2008;
originally announced September 2008.
-
Scintillation yield of liquid xenon at room temperature
Authors:
K. Ueshima,
K. Abe,
T. Iida,
M. Ikeda,
K. Kobayashi,
Y. Koshio,
A. Minamino,
M. Miura,
S. Moriyama,
M. Nakahata,
Y. Nakajima,
H. Ogawa,
H. Sekiya,
M. Shiozawa,
Y. Suzuki,
A. Takeda,
Y. Takeuchi,
M. Yamashita,
K. Kaneyuki,
T. Doke,
Y. Ebizuka,
J. Kikuchi,
A. Ota,
S. Suzuki,
T. Takahashi
, et al. (20 additional authors not shown)
Abstract:
The intensity of scintillation light emission from liquid xenon at room temperature was measured. The scintillation light yield at 1 deg. was measured to be 0.64 +/- 0.02 (stat.) +/- 0.06 (sys.) of that at -100 deg. Using the reported light yield at -100 deg. (46 photons/keV), the measured light yield at 1 deg. corresponds to 29 photons/keV. This result shows that liquid xenon scintillator gives…
▽ More
The intensity of scintillation light emission from liquid xenon at room temperature was measured. The scintillation light yield at 1 deg. was measured to be 0.64 +/- 0.02 (stat.) +/- 0.06 (sys.) of that at -100 deg. Using the reported light yield at -100 deg. (46 photons/keV), the measured light yield at 1 deg. corresponds to 29 photons/keV. This result shows that liquid xenon scintillator gives high light yield even at room temperature.
△ Less
Submitted 19 March, 2008;
originally announced March 2008.
