-
Quantum-inspired super-resolution of fluorescent point-like sources
Authors:
Cheyenne S. Mitchell,
Dhananjay Dhruva,
Zachary P. Burke,
David J. Durden,
Armine I. Dingilian,
Mikael P. Backlund
Abstract:
We report the experimental super-resolution of pairs of point-like fluorescent sources using a modified image inversion interferometer microscope. The technique is inspired by recent developments in the application of quantum parameter estimation theory to semiclassical imaging problems. We find that the image inversion technique requires special polarization filtering to account for the dipolar n…
▽ More
We report the experimental super-resolution of pairs of point-like fluorescent sources using a modified image inversion interferometer microscope. The technique is inspired by recent developments in the application of quantum parameter estimation theory to semiclassical imaging problems. We find that the image inversion technique requires special polarization filtering to account for the dipolar nature of the emission. Using an azimuthal polarizer, we obtain improvements in the Fisher information of point-source separation by over an order of magnitude relative to direct imaging. Unlike established super-resolution fluorescence techniques, the method does not require sequential photoswitching/blinking of the fluorophores, and thus could facilitate significant speed-ups for certain biological imaging/tracking tasks.
△ Less
Submitted 21 January, 2025; v1 submitted 21 December, 2024;
originally announced December 2024.
-
Report on the Advanced Linear Collider Study Group (ALEGRO) Workshop 2024
Authors:
J. Vieira,
B. Cros,
P. Muggli,
I. A. Andriyash,
O. Apsimon,
M. Backhouse,
C. Benedetti,
S. S. Bulanov,
A. Caldwell,
Min Chen,
V. Cilento,
S. Corde,
R. D'Arcy,
S. Diederichs,
E. Ericson,
E. Esarey,
J. Farmer,
L. Fedeli,
A. Formenti,
B. Foster,
M. Garten,
C. G. R. Geddes,
T. Grismayer,
M. J. Hogan,
S. Hooker
, et al. (19 additional authors not shown)
Abstract:
The workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10\,TeV, e$^+$/e$^-$, e$^-$/e$^-$, or $γγ$). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt…
▽ More
The workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10\,TeV, e$^+$/e$^-$, e$^-$/e$^-$, or $γγ$). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt peak power, a few tens of femtosecond-long pulses) and acceleration of electrons to hundreds of mega electron volts to multi giga electron volts became commercially available. The community spans several continents (Europe, America, Asia), including more than 62 laboratories in more than 20 countries. It is among the missions of the ICFA-ANA panel to feature the amazing progress made with ANAs, to provide international coordination and to foster international collaborations towards a future HEP collider. The scope of this edition of the workshop was to discuss the recent progress and necessary steps towards realizing a linear collider for particle physics based on novel-accelerator technologies (laser or beam driven in plasma or structures). Updates on the relevant aspects of the European Strategy for Particle Physics (ESPP) Roadmap Process as well as of the P5 (in the US) were presented, and ample time was dedicated to discussions. The major outcome of the workshop is the decision for ALEGRO to coordinate efforts in Europe, in the US, and in Asia towards a pre-CDR for an ANA-based, 10\,TeV CM collider. This goal of this coordination is to lead to a funding proposal to be submitted to both EU and EU/US funding agencies. This document presents a summary of the workshop, as seen by the co-chairs, as well as short 'one-pagers' written by the presenters at the workshop.
△ Less
Submitted 15 August, 2024; v1 submitted 6 August, 2024;
originally announced August 2024.
-
Synthesizing Particle-in-Cell Simulations Through Learning and GPU Computing for Hybrid Particle Accelerator Beamlines
Authors:
Ryan T. Sandberg,
Remi Lehe,
Chad E. Mitchell,
Marco Garten,
Andrew Myers,
Ji Qiang,
Jean-Luc Vay,
Axel Huebl
Abstract:
Particle accelerator modeling is an important field of research and development, essential to investigating, designing and operating some of the most complex scientific devices ever built. Kinetic simulations of relativistic, charged particle beams and advanced plasma accelerator elements are often performed with high-fidelity particle-in-cell simulations, some of which fill the largest GPU superc…
▽ More
Particle accelerator modeling is an important field of research and development, essential to investigating, designing and operating some of the most complex scientific devices ever built. Kinetic simulations of relativistic, charged particle beams and advanced plasma accelerator elements are often performed with high-fidelity particle-in-cell simulations, some of which fill the largest GPU supercomputers. Start-to-end modeling of a particle accelerator includes many elements and it is desirable to integrate and model advanced accelerator elements fast, in effective models. Traditionally, analytical and reduced-physics models fill this role. The vast data from high-fidelity simulations and power of GPU-accelerated computation open a new opportunity to complement traditional modeling without approximations: surrogate modeling through machine learning. In this paper, we implement, present and benchmark such a data-driven workflow, synthesising a fully GPU-accelerated, conventional-surrogate simulation for hybrid particle accelerator beamlines.
△ Less
Submitted 30 April, 2024; v1 submitted 27 February, 2024;
originally announced February 2024.
-
Laser-Plasma Ion Beam Booster Based on Hollow-Channel Magnetic Vortex Acceleration
Authors:
Marco Garten,
Stepan S. Bulanov,
Sahel Hakimi,
Lieselotte Obst-Huebl,
Chad E. Mitchell,
Carl Schroeder,
Eric Esarey,
Cameron G. R. Geddes,
Jean-Luc Vay,
Axel Huebl
Abstract:
Laser-driven ion acceleration provides ultra-short, high-charge, low-emittance beams, which are desirable for a wide range of high-impact applications. Yet after decades of research, a significant increase in maximum ion energy is still needed. This work introduces a quality-preserving staging concept for ultra-intense ion bunches that is seamlessly applicable from the non-relativistic plasma sour…
▽ More
Laser-driven ion acceleration provides ultra-short, high-charge, low-emittance beams, which are desirable for a wide range of high-impact applications. Yet after decades of research, a significant increase in maximum ion energy is still needed. This work introduces a quality-preserving staging concept for ultra-intense ion bunches that is seamlessly applicable from the non-relativistic plasma source to the relativistic regime. Full 3D particle-in-cell simulations prove robustness and capture of a high-charge proton bunch, suitable for readily available and near-term laser facilities.
△ Less
Submitted 5 May, 2024; v1 submitted 9 August, 2023;
originally announced August 2023.
-
Tight information bounds for spontaneous emission lifetime resolution of quantum sources with varied spectral purity
Authors:
Cheyenne S. Mitchell,
Mikael P. Backlund
Abstract:
We generalize the theory of resolving a mixture of two closely spaced spontaneous emission lifetimes to include pure dephasing contributions to decoherence, leading to the resurgence of Rayleigh's Curse at small lifetime separations. Considerable resolution enhancement remains possible when lifetime broadening is more significant than that due to pure dephasing. In the limit that lifetime broadeni…
▽ More
We generalize the theory of resolving a mixture of two closely spaced spontaneous emission lifetimes to include pure dephasing contributions to decoherence, leading to the resurgence of Rayleigh's Curse at small lifetime separations. Considerable resolution enhancement remains possible when lifetime broadening is more significant than that due to pure dephasing. In the limit that lifetime broadening dominates, one can achieve super-resolution either by a tailored one-photon measurement or Hong-Ou-Mandel interferometry. We describe conditions for which either choice is superior.
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
From Compact Plasma Particle Sources to Advanced Accelerators with Modeling at Exascale
Authors:
Axel Huebl,
Remi Lehe,
Edoardo Zoni,
Olga Shapoval,
Ryan T. Sandberg,
Marco Garten,
Arianna Formenti,
Revathi Jambunathan,
Prabhat Kumar,
Kevin Gott,
Andrew Myers,
Weiqun Zhang,
Ann Almgren,
Chad E. Mitchell,
Ji Qiang,
David Grote,
Alexander Sinn,
Severin Diederichs,
Maxence Thevenet,
Luca Fedeli,
Thomas Clark,
Neil Zaim,
Henri Vincenti,
Jean-Luc Vay
Abstract:
Developing complex, reliable advanced accelerators requires a coordinated, extensible, and comprehensive approach in modeling, from source to the end of beam lifetime. We present highlights in Exascale Computing to scale accelerator modeling software to the requirements set for contemporary science drivers. In particular, we present the first laser-plasma modeling on an exaflop supercomputer using…
▽ More
Developing complex, reliable advanced accelerators requires a coordinated, extensible, and comprehensive approach in modeling, from source to the end of beam lifetime. We present highlights in Exascale Computing to scale accelerator modeling software to the requirements set for contemporary science drivers. In particular, we present the first laser-plasma modeling on an exaflop supercomputer using the US DOE Exascale Computing Project WarpX. Leveraging developments for Exascale, the new DOE SCIDAC-5 Consortium for Advanced Modeling of Particle Accelerators (CAMPA) will advance numerical algorithms and accelerate community modeling codes in a cohesive manner: from beam source, over energy boost, transport, injection, storage, to application or interaction. Such start-to-end modeling will enable the exploration of hybrid accelerators, with conventional and advanced elements, as the next step for advanced accelerator modeling. Following open community standards, we seed an open ecosystem of codes that can be readily combined with each other and machine learning frameworks. These will cover ultrafast to ultraprecise modeling for future hybrid accelerator design, even enabling virtual test stands and twins of accelerators that can be used in operations.
△ Less
Submitted 18 April, 2023; v1 submitted 22 March, 2023;
originally announced March 2023.
-
Next Generation Computational Tools for the Modeling and Design of Particle Accelerators at Exascale
Authors:
Axel Huebl,
Remi Lehe,
Chad E. Mitchell,
Ji Qiang,
Robert D. Ryne,
Ryan T. Sandberg,
Jean-Luc Vay
Abstract:
Particle accelerators are among the largest, most complex devices. To meet the challenges of increasing energy, intensity, accuracy, compactness, complexity and efficiency, increasingly sophisticated computational tools are required for their design and optimization. It is key that contemporary software take advantage of the latest advances in computer hardware and scientific software engineering…
▽ More
Particle accelerators are among the largest, most complex devices. To meet the challenges of increasing energy, intensity, accuracy, compactness, complexity and efficiency, increasingly sophisticated computational tools are required for their design and optimization. It is key that contemporary software take advantage of the latest advances in computer hardware and scientific software engineering practices, delivering speed, reproducibility and feature composability for the aforementioned challenges. A new open source software stack is being developed at the heart of the Beam pLasma Accelerator Simulation Toolkit (BLAST) by LBNL and collaborators, providing new particle-in-cell modeling codes capable of exploiting the power of GPUs on Exascale supercomputers. Combined with advanced numerical techniques, such as mesh-refinement, and intrinsic support for machine learning, these codes are primed to provide ultrafast to ultraprecise modeling for future accelerator design and operations.
△ Less
Submitted 9 August, 2022; v1 submitted 3 August, 2022;
originally announced August 2022.
-
Extracting particle size distribution from laser speckle with a physics-enhanced autocorrelation-based estimator (PEACE)
Authors:
Qihang Zhang,
Janaka C. Gamekkanda,
Ajinkya Pandit,
Wenlong Tang,
Charles Papageorgiou,
Chris Mitchell,
Yihui Yang,
Michael Schwaerzler,
Tolutola Oyetunde,
Richard D. Braatz,
Allan S. Myerson,
George Barbastathis
Abstract:
Extracting quantitative information about highly scattering surfaces from an imaging system is challenging because the phase of the scattered light undergoes multiple folds upon propagation, resulting in complex speckle patterns. One specific application is the drying of wet powders in the pharmaceutical industry, where quantifying the particle size distribution (PSD) is of particular interest. A…
▽ More
Extracting quantitative information about highly scattering surfaces from an imaging system is challenging because the phase of the scattered light undergoes multiple folds upon propagation, resulting in complex speckle patterns. One specific application is the drying of wet powders in the pharmaceutical industry, where quantifying the particle size distribution (PSD) is of particular interest. A non-invasive and real-time monitoring probe in the drying process is required, but there is no suitable candidate for this purpose. In this report, we develop a theoretical relationship from the PSD to the speckle image and describe a physics-enhanced autocorrelation-based estimator (PEACE) machine learning algorithm for speckle analysis to measure the PSD of a powder surface. This method solves both the forward and inverse problems together and enjoys increased interpretability, since the machine learning approximator is regularized by the physical law.
△ Less
Submitted 2 March, 2023; v1 submitted 20 April, 2022;
originally announced April 2022.
-
Using Kernel-Based Statistical Distance to Study the Dynamics of Charged Particle Beams in Particle-Based Simulation Codes
Authors:
Chad E. Mitchell,
Robert D. Ryne,
Kilean Hwang
Abstract:
Measures of discrepancy between probability distributions (statistical distance) are widely used in the fields of artificial intelligence and machine learning. We describe how certain measures of statistical distance can be implemented as numerical diagnostics for simulations involving charged-particle beams. Related measures of statistical dependence are also described. The resulting diagnostics…
▽ More
Measures of discrepancy between probability distributions (statistical distance) are widely used in the fields of artificial intelligence and machine learning. We describe how certain measures of statistical distance can be implemented as numerical diagnostics for simulations involving charged-particle beams. Related measures of statistical dependence are also described. The resulting diagnostics provide sensitive measures of dynamical processes important for beams in nonlinear or high-intensity systems, which are otherwise difficult to characterize. The focus is on kernel-based methods such as Maximum Mean Discrepancy, which have a well-developed mathematical foundation and reasonable computational complexity. Several benchmark problems and examples involving intense beams are discussed. While the focus is on charged-particle beams, these methods may also be applied to other many-body systems such as plasmas or gravitational systems.
△ Less
Submitted 8 April, 2022;
originally announced April 2022.
-
Quantum limits to resolution and discrimination of spontaneous emission lifetimes
Authors:
Cheyenne S. Mitchell,
Mikael P. Backlund
Abstract:
In this work we investigate the quantum information theoretical limits to several tasks related to lifetime estimation and discrimination of a two-level spontaneous optical emitter. We focus in particular on the model problem of resolving two mutually incoherent exponential decays with highly overlapping temporal probability profiles. Mirroring recent work on quantum-inspired super-resolution of p…
▽ More
In this work we investigate the quantum information theoretical limits to several tasks related to lifetime estimation and discrimination of a two-level spontaneous optical emitter. We focus in particular on the model problem of resolving two mutually incoherent exponential decays with highly overlapping temporal probability profiles. Mirroring recent work on quantum-inspired super-resolution of point emitters, we find that direct lifetime measurement suffers from an analogue of "Rayleigh's Curse" when the time constants of the two decay channels approach one another. We propose alternative measurement schemes that circumvent this limit, and also demonstrate superiority to direct measurement for a related binary hypothesis test. Our findings add to a growing list of examples in which a quantum analysis uncovers significant information gains for certain tasks in opto-molecular metrology that do not rely on multiphoton interference, but evidently do benefit from a more thorough exploitation of the coherence properties of single photons.
△ Less
Submitted 8 February, 2022;
originally announced February 2022.
-
Simulations of Future Particle Accelerators: Issues and Mitigations
Authors:
D. Sagan,
M. Berz,
N. M. Cook,
Y. Hao,
G. Hoffstaetter,
A. Huebl,
C. -K. Huang,
M. H. Langston,
C. E. Mayes,
C. E. Mitchell,
C. -K. Ng,
J. Qiang,
R. D. Ryne,
A. Scheinker,
E. Stern,
J. -L. Vay,
D. Winklehner,
H. Zhang
Abstract:
The ever increasing demands placed upon machine performance have resulted in the need for more comprehensive particle accelerator modeling. Computer simulations are key to the success of particle accelerators. Many aspects of particle accelerators rely on computer modeling at some point, sometimes requiring complex simulation tools and massively parallel supercomputing. Examples include the modeli…
▽ More
The ever increasing demands placed upon machine performance have resulted in the need for more comprehensive particle accelerator modeling. Computer simulations are key to the success of particle accelerators. Many aspects of particle accelerators rely on computer modeling at some point, sometimes requiring complex simulation tools and massively parallel supercomputing. Examples include the modeling of beams at extreme intensities and densities (toward the quantum degeneracy limit), and with ultra-fine control (down to the level of individual particles). In the future, adaptively tuned models might also be relied upon to provide beam measurements beyond the resolution of existing diagnostics. Much time and effort has been put into creating accelerator software tools, some of which are highly successful. However, there are also shortcomings such as the general inability of existing software to be easily modified to meet changing simulation needs. In this paper possible mitigating strategies are discussed for issues faced by the accelerator community as it endeavors to produce better and more comprehensive modeling tools. This includes lack of coordination between code developers, lack of standards to make codes portable and/or reusable, lack of documentation, among others.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
Extracting Dynamical Frequencies from Invariants of Motion in Finite-Dimensional Nonlinear Integrable Systems
Authors:
Chad E. Mitchell,
Robert D. Ryne,
Kilean Hwang,
Sergei Nagaitsev,
Timofey Zolkin
Abstract:
Integrable dynamical systems play an important role in many areas of science, including accelerator and plasma physics. An integrable dynamical system with $n$ degrees of freedom (DOF) possesses $n$ nontrivial integrals of motion, and can be solved, in principle, by covering the phase space with one or more charts in which the dynamics can be described using action-angle coordinates. To obtain the…
▽ More
Integrable dynamical systems play an important role in many areas of science, including accelerator and plasma physics. An integrable dynamical system with $n$ degrees of freedom (DOF) possesses $n$ nontrivial integrals of motion, and can be solved, in principle, by covering the phase space with one or more charts in which the dynamics can be described using action-angle coordinates. To obtain the frequencies of motion, both the transformation to action-angle coordinates and its inverse must be known in explicit form. However, no general algorithm exists for constructing this transformation explicitly from a set of $n$ known (and generally coupled) integrals of motion. In this paper we describe how one can determine the dynamical frequencies of the motion as functions of these $n$ integrals in the absence of explicitly-known action-angle variables, and we provide several examples.
△ Less
Submitted 10 June, 2021; v1 submitted 4 June, 2021;
originally announced June 2021.
-
Design of double- and multi-bend achromat lattices with large dynamic aperture and approximate invariants
Authors:
Yongjun Li,
Kilean Hwang,
Chad Mitchell,
Robert Rainer,
Robert Ryne,
Victor Smaluk
Abstract:
A numerical method to design nonlinear double- and multi-bend achromat (DBA and MBA) lattices with approximate invariants of motion is investigated. The search for such nonlinear lattices is motivated by Fermilab's Integrable Optics Test Accelerator (IOTA), whose design is based on an integrable Hamiltonian system with two invariants of motion. While it may not be possible to design an achromatic…
▽ More
A numerical method to design nonlinear double- and multi-bend achromat (DBA and MBA) lattices with approximate invariants of motion is investigated. The search for such nonlinear lattices is motivated by Fermilab's Integrable Optics Test Accelerator (IOTA), whose design is based on an integrable Hamiltonian system with two invariants of motion. While it may not be possible to design an achromatic lattice for a dedicated synchrotron light source storage ring with one or more exact invariants of motion, it is possible to tune the sextupoles and octupoles in existing DBA and MBA lattices to produce approximate invariants. In our procedure, the lattice is tuned while minimizing the turn-by-turn fluctuations of the Courant-Snyder actions $J_x$ and $J_y$ at several distinct amplitudes, while simultaneously minimizing diffusion of the on-energy betatron tunes. The resulting lattices share some important features with integrable ones, such as a large dynamic aperture, trajectories confined to invariant tori, robustness to resonances and errors, and a large amplitude-dependent tune-spread. Compared to the nominal NSLS-II lattice, the single- and multi-bunch instability thresholds are increased and the bunch-by-bunch feedback gain can be reduced.
△ Less
Submitted 23 November, 2021; v1 submitted 10 March, 2021;
originally announced March 2021.
-
QUAREP-LiMi: A community-driven initiative to establish guidelines for quality assessment and reproducibility for instruments and images in light microscopy
Authors:
Glyn Nelson,
Ulrike Boehm,
Steve Bagley,
Peter Bajcsy,
Johanna Bischof,
Claire M Brown,
Aurelien Dauphin,
Ian M Dobbie,
John E Eriksson,
Orestis Faklaris,
Julia Fernandez-Rodriguez,
Alexia Ferrand,
Laurent Gelman,
Ali Gheisari,
Hella Hartmann,
Christian Kukat,
Alex Laude,
Miso Mitkovski,
Sebastian Munck,
Alison J North,
Tobias M Rasse,
Ute Resch-Genger,
Lucas C Schuetz,
Arne Seitz,
Caterina Strambio-De-Castillia
, et al. (75 additional authors not shown)
Abstract:
In April 2020, the QUality Assessment and REProducibility for Instruments and Images in Light Microscopy (QUAREP-LiMi) initiative was formed. This initiative comprises imaging scientists from academia and industry who share a common interest in achieving a better understanding of the performance and limitations of microscopes and improved quality control (QC) in light microscopy. The ultimate goal…
▽ More
In April 2020, the QUality Assessment and REProducibility for Instruments and Images in Light Microscopy (QUAREP-LiMi) initiative was formed. This initiative comprises imaging scientists from academia and industry who share a common interest in achieving a better understanding of the performance and limitations of microscopes and improved quality control (QC) in light microscopy. The ultimate goal of the QUAREP-LiMi initiative is to establish a set of common QC standards, guidelines, metadata models, and tools, including detailed protocols, with the ultimate aim of improving reproducible advances in scientific research. This White Paper 1) summarizes the major obstacles identified in the field that motivated the launch of the QUAREP-LiMi initiative; 2) identifies the urgent need to address these obstacles in a grassroots manner, through a community of stakeholders including, researchers, imaging scientists, bioimage analysts, bioimage informatics developers, corporate partners, funding agencies, standards organizations, scientific publishers, and observers of such; 3) outlines the current actions of the QUAREP-LiMi initiative, and 4) proposes future steps that can be taken to improve the dissemination and acceptance of the proposed guidelines to manage QC. To summarize, the principal goal of the QUAREP-LiMi initiative is to improve the overall quality and reproducibility of light microscope image data by introducing broadly accepted standard practices and accurately captured image data metrics.
△ Less
Submitted 27 January, 2021; v1 submitted 21 January, 2021;
originally announced January 2021.
-
Complex Representation of Potentials and Fields for the Nonlinear Magnetic Insert of the Integrable Optics Test Accelerator
Authors:
Chad Mitchell
Abstract:
An alternative representation for the vector potential of the nonlinear magnetic insert for the Integrable Optics Test Accelerator (IOTA), first described in Sec. V.A. of the paper of Danilov and Nagaitsev, is determined from first principles using standard complex variable methods. In particular, it is shown that the coupled system consisting of the 2D Laplace equation and the Bertrand-Darboux eq…
▽ More
An alternative representation for the vector potential of the nonlinear magnetic insert for the Integrable Optics Test Accelerator (IOTA), first described in Sec. V.A. of the paper of Danilov and Nagaitsev, is determined from first principles using standard complex variable methods. In particular, it is shown that the coupled system consisting of the 2D Laplace equation and the Bertrand-Darboux equation is equivalent to a single ordinary differential equation in the complex plane, and a simple solution is constructed. The results are consistent with the paper of Danilov and Nagaitsev, and this concise representation provides computational advantages for particle tracking through the nonlinear insert by avoiding numerical errors caused by small denominators that appear when evaluating transverse derivatives of the vector potential near the midplane. A similar representation is provided for the spatial dependence of the two invariants of motion.
△ Less
Submitted 31 July, 2019;
originally announced August 2019.
-
RF design of APEX2 two-cell continuous-wave normal conducting photoelectron gun cavity based on multi-objective genetic algorithm
Authors:
T. Luo,
H. Feng,
D. Filippetto,
M. Johnson,
A. Lambert,
D. Li,
C. Mitchell,
F. Sannibale,
J. Staples,
S. Virostek,
R. Wells
Abstract:
High brightness, high repetition rate electron beams are key components for optimizing the performance of next generation scientific instruments, such as MHz-class X-ray Free Electron Laser (XFEL) and Ultra-fast Electron Diffraction/Microscopy (UED/UEM). In the Advanced Photo-injector EXperiment (APEX) at Berkeley Lab, a photoelectron gun based on a 185.7 MHz normal conducting re-entrant RF cavity…
▽ More
High brightness, high repetition rate electron beams are key components for optimizing the performance of next generation scientific instruments, such as MHz-class X-ray Free Electron Laser (XFEL) and Ultra-fast Electron Diffraction/Microscopy (UED/UEM). In the Advanced Photo-injector EXperiment (APEX) at Berkeley Lab, a photoelectron gun based on a 185.7 MHz normal conducting re-entrant RF cavity, has been proven to be a feasible solution to provide high brightness, high repetition rate electron beam for both XFEL and UED/UEM. Based on the success of APEX, a new electron gun system, named APEX2, has been under development to further improve the electron beam brightness. For APEX2, we have designed a new 162.5 MHz two-cell photoelectron gun and achieved a significant increase on the cathode launching field and the beam exit energy. For a fixed charge per bunch, these improvements will allow for the emittance reduction and hence an increased beam brightness. The design of APEX2 gun cavity is a complex problem with multiple design goals and restrictions, some even competing each other. For a systematic and comprehensive search for the optimized cavity geometry, we have developed and implemented a novel optimization method based on the Multi-Objective Genetic Algorithm (MOGA).
△ Less
Submitted 28 May, 2019; v1 submitted 25 May, 2019;
originally announced May 2019.
-
Simulation Study on the Emittance Compensation of Off-axis Emitted Beam in RF Photoinjector
Authors:
Rui-Xuan Huang,
Chad Mitchell,
Qi-Ka Jia,
Christos Papadopoulos,
Fernando Sannibale
Abstract:
To make full use of photocathode material and improve its quantum efficiency lifetime, it can be necessary to operate laser away from the cathode center in photoinjectors. In RF guns, the off-axis emitted beam will see a time-dependent RF effect, which would generate a significant growth in transverse emittance. It has been demonstrated that such an emittance growth can be almost completely compen…
▽ More
To make full use of photocathode material and improve its quantum efficiency lifetime, it can be necessary to operate laser away from the cathode center in photoinjectors. In RF guns, the off-axis emitted beam will see a time-dependent RF effect, which would generate a significant growth in transverse emittance. It has been demonstrated that such an emittance growth can be almost completely compensated by orienting the beam on a proper orbit in the downstream RF cavities along the injector. In this paper we analyze in detail the simulation techniques used in reference[1] and the issues associated with them. The optimization of photoinjector systems involving off-axis beams is a challenging problem. To solve this problem, one needs advanced simulation tools including both genetic algorithms and an efficient algorithm for 3D space charge. In this paper, we report on simulation studies where the two codes ASTRA and IMPACT-T are used jointly to overcome these challenges, in order to optimize a system designed to compensate for the emittance growth in a beam emitted off axis.
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
An Underappreciated Radiation Hazard from High Voltage Electrodes in Vacuum
Authors:
Adam West,
Zack Lasner,
David DeMille,
Elizabeth West,
Cristian Panda,
John Doyle,
Gerald Gabrielse,
Adam Kryskow,
Corinne Mitchell
Abstract:
The use of high voltage (HV) electrodes in vacuum is commonplace in physics laboratories. In such systems, it has long been known that electron emission from an HV cathode can lead to bremsstrahlung X-rays; indeed, this is the basic principle behind the operation of standard X-ray sources. However, in laboratory setups where X-ray production is not the goal and no electron source is deliberately i…
▽ More
The use of high voltage (HV) electrodes in vacuum is commonplace in physics laboratories. In such systems, it has long been known that electron emission from an HV cathode can lead to bremsstrahlung X-rays; indeed, this is the basic principle behind the operation of standard X-ray sources. However, in laboratory setups where X-ray production is not the goal and no electron source is deliberately introduced, field-emitted electrons accelerated by HV can produce X-rays as an unintended hazardous byproduct. Both the level of hazard and the safe operating regimes for HV vacuum electrode systems are not widely appreciated, at least in university laboratories. A reinforced awareness of the radiation hazards associated with vacuum HV setups would be beneficial. We present a case study of a HV vacuum electrode device operated in a university atomic physics laboratory. We describe the characterisation of the observed X-ray radiation, its relation to the observed leakage current in the device, the steps taken to contain and mitigate the radiation hazard, and suggest safety guidelines.
△ Less
Submitted 5 July, 2016;
originally announced July 2016.
-
A General Slice Moment Decomposition of RMS Beam Emittance
Authors:
Chad Mitchell
Abstract:
The square of the horizontal projected (rms) beam emittance is expressed as the sum of four nonnegative contributions, each described using the slice moments of the beam and possessing a natural interpretation in terms of the geometrical properties of the beam in the six-dimensional phase space. The mathematical formalism describing the relationships between projected beam quantities and slice bea…
▽ More
The square of the horizontal projected (rms) beam emittance is expressed as the sum of four nonnegative contributions, each described using the slice moments of the beam and possessing a natural interpretation in terms of the geometrical properties of the beam in the six-dimensional phase space. The mathematical formalism describing the relationships between projected beam quantities and slice beam quantities is reviewed. The results may be used to reconstruct the moments and emittances of the beam from the moments of its subpopulations, as well as to isolate and better understand a variety of slice and interslice dynamical contributions to the projected beam emittance growth.
△ Less
Submitted 15 September, 2015;
originally announced September 2015.
-
A fast high-order method to calculate wakefield forces in an electron beam
Authors:
Ji Qiang,
Chad Mitchell,
Robert D. Ryne
Abstract:
In this paper we report on a high-order fast method to numerically calculate wakefield forces in an electron beam given a wake function model. This method is based on a Newton-Cotes quadrature rule for integral approximation and an FFT method for discrete summation that results in an $O(Nlog(N))$ computational cost, where $N$ is the number of grid points. Using the Simpson quadrature rule with an…
▽ More
In this paper we report on a high-order fast method to numerically calculate wakefield forces in an electron beam given a wake function model. This method is based on a Newton-Cotes quadrature rule for integral approximation and an FFT method for discrete summation that results in an $O(Nlog(N))$ computational cost, where $N$ is the number of grid points. Using the Simpson quadrature rule with an accuracy of $O(h^4)$, where $h$ is the grid size, we present numerical calculation of the wakefields from a resonator wake function model and from a one-dimensional coherent synchrotron radiation (CSR) wake model. Besides the fast speed and high numerical accuracy, the calculation using the direct line density instead of the first derivative of the line density avoids numerical filtering of the electron density function for computing the CSR wakefield force.
△ Less
Submitted 23 March, 2012;
originally announced March 2012.
-
Accurate Transfer Maps for Realistic Beamline Elements: Part I, Straight Elements
Authors:
Chad E. Mitchell,
Alex J. Dragt
Abstract:
The behavior of orbits in charged-particle beam transport systems, including both linear and circular accelerators as well as final focus sections and spectrometers, can depend sensitively on nonlinear fringe-field and high-order-multipole effects in the various beam-line elements. The inclusion of these effects requires a detailed and realistic model of the interior and fringe fields, including…
▽ More
The behavior of orbits in charged-particle beam transport systems, including both linear and circular accelerators as well as final focus sections and spectrometers, can depend sensitively on nonlinear fringe-field and high-order-multipole effects in the various beam-line elements. The inclusion of these effects requires a detailed and realistic model of the interior and fringe fields, including their high spatial derivatives. A collection of surface fitting methods has been developed for extracting this information accurately from 3-dimensional field data on a grid, as provided by various 3-dimensional finite-element field codes. Based on these realistic field models, Lie or other methods may be used to compute accurate design orbits and accurate transfer maps about these orbits. Part I of this work presents a treatment of straight-axis magnetic elements, while Part II will treat bending dipoles with large sagitta. An exactly-soluble but numerically challenging model field is used to provide a rigorous collection of performance benchmarks.
△ Less
Submitted 5 May, 2010; v1 submitted 9 January, 2010;
originally announced January 2010.
