-
All-dielectric Metaphotonics for Advanced THz Control of Spins
Authors:
Lucas van Gerven,
Daria O. Ignatyeva,
Daniil V. Konkov,
V. Bilyk,
T. Metzger,
Denis M. Krichevsky,
Svetlana A. Evstigneeva,
Petr M. Vetoshko,
Vladimir I. Belotelov,
Aleksei V. Kimel
Abstract:
While nearly single cycle THz pulse is conventionally accepted as the stimulus for the fastest and the most energy efficient control of spins in magnets, all-dielectric metasurfaces have been recently demonstrated to be the least dissipative mean to enhance and control the coupling of light to spins. All-dielectric metasurfaces for the THz control of spins hold great potential in the field of spin…
▽ More
While nearly single cycle THz pulse is conventionally accepted as the stimulus for the fastest and the most energy efficient control of spins in magnets, all-dielectric metasurfaces have been recently demonstrated to be the least dissipative mean to enhance and control the coupling of light to spins. All-dielectric metasurfaces for the THz control of spins hold great potential in the field of spintronics and related technologies, pushing the boundaries of speed and energy efficiency in spin-based information processing. Here we demonstrate such a metasurface for an advanced THz control of spins in a ferrimagnetic film of iron garnet. Structuring a nonmagnetic substrate one can force a THz electromagnetic field, otherwise described by plane waves, to acquire an out-of-plane magnetic field and thus enable arbitrary direction of the torque acting on spins in all three dimensions. Hence, metaphotonics opens up a plethora of opportunities for advanced control of spins at THz rates in many hot fields of contemporary science, including spintronics, magnonics and quantum computing.
△ Less
Submitted 24 April, 2025;
originally announced April 2025.
-
Rocket Exhaust Blowing Soil in Near Vacuum Conditions is Faster than Predicted by Continuum Scaling Laws
Authors:
Philip T. Metzger
Abstract:
Experiments were performed to study how rocket exhaust blows soil in lunar and Martian conditions. Jets of gas were blown downwardly at various granular materials while a camera recorded the formation of scour holes as the material was removed. The experiments were performed in a series of conditions ranging from ambient 101 kPa pressure down to 0.3 kPa. This includes the range that is relevant fo…
▽ More
Experiments were performed to study how rocket exhaust blows soil in lunar and Martian conditions. Jets of gas were blown downwardly at various granular materials while a camera recorded the formation of scour holes as the material was removed. The experiments were performed in a series of conditions ranging from ambient 101 kPa pressure down to 0.3 kPa. This includes the range that is relevant for lunar conditions, because it is not hard vacuum inside the rocket exhaust where soil is being eroded. Prior work in ambient conditions showed that erosion rate is proportional to the square of the densimetric Froude number. However, the prior work was not performed at low pressures. In the new work, preliminary results show that as the gas density is so low that gas flow around the sand grains is no longer in the continuum regime, then erosion rate is faster than predicted by the earlier results. The dependency of erosion rate on various parameters is determined, but it turns out to be more complex than expected so additional experimental work will be required to develop complete scaling relationships.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Lunar Cold Trap Contamination by Landing Vehicles
Authors:
Scott T. Shipley,
John E. Lane,
Philip T. Metzger
Abstract:
Tools have been developed to model and simulate the effects of lunar landing vehicles on the lunar environment, mostly addressing the effects of regolith erosion by rocket plumes and the fate of the ejected lunar soil particles. The KSC Granular Mechanics and Regolith Operations Lab tools have now been expanded to address volatile contamination of the lunar surface (Stern, 1999). Landing nearby su…
▽ More
Tools have been developed to model and simulate the effects of lunar landing vehicles on the lunar environment, mostly addressing the effects of regolith erosion by rocket plumes and the fate of the ejected lunar soil particles. The KSC Granular Mechanics and Regolith Operations Lab tools have now been expanded to address volatile contamination of the lunar surface (Stern, 1999). Landing nearby such a crater will result in the migration of significant exhaust plume gas into the cold trap of the crater, and will also create an unnatural atmosphere over the volatile reservoirs that are to be studied. Our calculations address: 1) the time for the plume-induced local atmosphere above cold traps to decay to normal levels, 2) the efficiency of gas migration into a permanently shadowed crater when the landing is outside it but nearby, and 3) reduction on contamination afforded by moving the landing site further from the crater or by topographically shielding the crater from the direct flux of a lander's ground jet. We also address plume volatiles adsorbed onto and driven inside soil ejecta particles from their residence in the high pressure stagnation region of the engine exhaust plume, and how their mechanical dispersal across the lunar surface contributes to the induced atmosphere. One additional question is whether the collection of soil ejecta along the base of a topographic feature will produce a measurable plume volatile release distinct from the background. We mostly address item 2). Item 3) is obvious from our results excepting that the removal distances may be large, but changes to landing strategy can improve the situation.
△ Less
Submitted 7 June, 2023;
originally announced June 2023.
-
Thermal Extraction of Volatiles from Lunar and Asteroid Regolith in Axisymmetric Crank-Nicholson Modeling
Authors:
Philip T. Metzger,
Kris Zacny,
Phillip Morrison
Abstract:
A physics-based computer model has been developed to support the development of volatile extraction from regolith of the Moon and asteroids. The model is based upon empirical data sets for extraterrestrial soils and simulants, including thermal conductivity of regolith and mixed composition ice, heat capacity of soil and mixed composition ice, hydrated mineral volatile release patterns, and sublim…
▽ More
A physics-based computer model has been developed to support the development of volatile extraction from regolith of the Moon and asteroids. The model is based upon empirical data sets for extraterrestrial soils and simulants, including thermal conductivity of regolith and mixed composition ice, heat capacity of soil and mixed composition ice, hydrated mineral volatile release patterns, and sublimation of ice. A new thermal conductivity relationship is derived that generalizes cases of regolith with varying temperature, soil porosity, and pore vapor pressure. Ice composition is based upon measurements of icy ejecta from the Lunar CRater Observation and Sensing Satellite (LCROSS) impact and it is shown that thermal conductivity and heat capacity equations for water ice provide adequate accuracy at the present level of development. The heat diffusion equations are integrated with gas diffusion equations using multiple adaptive timesteps. The entire model is placed into a Crank-Nicholson framework where the finite difference formalism was extended to two dimensions in axisymmetry. The one-dimensional version of the model successfully predicts heat transfer that matches lunar and asteroid data sets. The axisymmetric model has been used to study heat dissipation around lunar drills and water extraction in asteroid coring devices.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Lagrangian Trajectory Modeling of Lunar Dust Particles
Authors:
John E. Lane,
Philip T. Metzger,
Christopher D. Immer,
Xiaoyi Li
Abstract:
A mathematical model and software implementation developed to predict trajectories of single lunar dust particles acted on by a high velocity gas flow is discussed. The model uses output from a computation fluid dynamics (CFD) or direct simulation Monte Carlo (DSMC) simulation of a rocket nozzle hot gas jet. The gas density, velocity vector field, and temperature predicted by the CFD/DSMC simulati…
▽ More
A mathematical model and software implementation developed to predict trajectories of single lunar dust particles acted on by a high velocity gas flow is discussed. The model uses output from a computation fluid dynamics (CFD) or direct simulation Monte Carlo (DSMC) simulation of a rocket nozzle hot gas jet. The gas density, velocity vector field, and temperature predicted by the CFD/DSMC simulations, provide the data necessary to compute the forces and accelerations acting on a single particle of regolith. All calculations of trajectory assume that the duration of particle flight is much shorter than the change in gas properties, i.e., the particle trajectory calculations take into account the spatial variation of the gas jet, but not the temporal variation. This is a reasonable first-order assumption. Final results are compared to photogrammetry derived estimates of dust angles form Apollo landing videos.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
The Damage to Lunar Orbiting Spacecraft Caused by the Ejecta of Lunar Landers
Authors:
Philip T. Metzger,
James G. Mantovani
Abstract:
This manuscript analyzes lunar lander soil erosion models and trajectory models to calculate how much damage will occur to spacecraft orbiting in the vicinity of the Moon. The soil erosion models have considerable uncertainty due to gaps in our understanding of the basic physics. The results for ~40 t landers show that the Lunar Orbital Gateway will be impacted by 1000s to 10,000s of particles per…
▽ More
This manuscript analyzes lunar lander soil erosion models and trajectory models to calculate how much damage will occur to spacecraft orbiting in the vicinity of the Moon. The soil erosion models have considerable uncertainty due to gaps in our understanding of the basic physics. The results for ~40 t landers show that the Lunar Orbital Gateway will be impacted by 1000s to 10,000s of particles per square meter but the particle sizes are very small and the impact velocity is low so the damage will be slight. However, a spacecraft in Low Lunar Orbit that happens to pass through the ejecta sheet will sustain extensive damage with hundreds of millions of impacts per square meter: although they are small, they are in the hypervelocity regime, and exposed glass on the spacecraft will sustain spallation over 4% of its surface.
△ Less
Submitted 20 May, 2023;
originally announced May 2023.
-
Laser-guided lightning
Authors:
Aurélien Houard,
Pierre Walch,
Thomas Produit,
Victor Moreno,
Benoit Mahieu,
Antonio Sunjerga,
Clemens Herkommer,
Amirhossein Mostajabi,
Ugo Andral,
Yves-Bernard André,
Magali Lozano,
Laurent Bizet,
Malte C. Schroeder,
Guillaume Schimmel,
Michel Moret,
Mark Stanley,
W. A. Rison,
Oliver Maurice,
Bruno Esmiller,
Knut Michel,
Walter Haas,
Thomas Metzger,
Marcos Rubinstein,
Farhad Rachidi,
Vernon Cooray
, et al. (3 additional authors not shown)
Abstract:
Electric currents circulating between charged clouds and the earth surface during lightning discharges are responsible for considerable damages and casualties. It is therefore important to develop better protection methods in addition to the traditional Franklin rod. Here we present the first demonstration that filaments formed by short and intense laser pulses can guide lightning discharges over…
▽ More
Electric currents circulating between charged clouds and the earth surface during lightning discharges are responsible for considerable damages and casualties. It is therefore important to develop better protection methods in addition to the traditional Franklin rod. Here we present the first demonstration that filaments formed by short and intense laser pulses can guide lightning discharges over considerable distances. We believe that this experimental breakthrough will lead to progress in lightning protection and lightning physics. An experimental campaign was carried out on the Säntis Mountain in Northeastern Switzerland during the Summer of 2021 with a high repetition rate terawatt laser. The guiding of an upward negative lightning leader over a distance of 50 m was recorded by two separate high-speed cameras. The guiding of negative lightning leaders by laser filaments was corroborated in three other instances by VHF interferometric measurements, and the number of X-ray bursts detected during guided lightning events was significantly increased. While this research field has been very active for more than 20 years with many research groups around the world working to achieve this goal, this result demonstrates lightning guiding by lasers, which may lead to the development of a laser lightning rod. This work paves the way for new atmospheric applications of ultrashort lasers and represents a significant step forward in the development of a laser based lightning protection for airports, launchpads or large infrastructures.
△ Less
Submitted 19 January, 2023; v1 submitted 8 July, 2022;
originally announced July 2022.
-
The Cost of Lunar Landing Pads with a Trade Study of Construction Methods
Authors:
Philip T. Metzger,
Greg W. Autry
Abstract:
This study estimates the cost of building lunar landing pads and examines whether any construction methods are economically superior to others. Some proposed methods require large amounts of mass transported from the Earth, others require high energy consumption on the lunar surface, and others have a long construction time. Each of these factors contributes direct and indirect costs to lunar acti…
▽ More
This study estimates the cost of building lunar landing pads and examines whether any construction methods are economically superior to others. Some proposed methods require large amounts of mass transported from the Earth, others require high energy consumption on the lunar surface, and others have a long construction time. Each of these factors contributes direct and indirect costs to lunar activities. The most important economic variables turn out to be the transportation cost to the lunar surface and the magnitude of the program delay cost imposed by a construction method. The cost of a landing pad depends sensitively on the optimization of the mass and speed of the construction equipment, so a minimum-cost set of equipment exists for each construction method within a specified economic scenario. Several scenarios have been analyzed across a range of transportation costs with both high and low program delay costs. It is found that microwave sintering is currently the most favorable method to build the inner, high temperature zone of a lunar landing pad, although other methods are within the range of uncertainty. The most favorable method to build the outer, low temperature zone of the landing pad is also sintering when transportation costs are high, but it switches to polymer infusion when transportation costs drop below about \$110K/kg to the lunar surface. It is estimated that the Artemis Basecamp could build a landing pad with a budgeted line-item cost of \$229M assuming that transportation costs will be reduced modestly from the current rate \$1M/kg to the lunar surface to \$300K/kg. A landing pad drops to \$130M when the transportation cost drops further to \$100K/kg, or to \$47M if transportation costs fall below \$10K/kg. Ultimately, landing pads can be built around the Moon at very low cost, due to economies of scale.
△ Less
Submitted 30 April, 2022;
originally announced May 2022.
-
Moons Are Planets: Scientific Usefulness Versus Cultural Teleology in the Taxonomy of Planetary Science
Authors:
Philip T. Metzger,
William M. Grundy,
Mark Sykes,
S. Alan Stern,
James F. Bell III,
Charlene E. Detelich,
Kirby D. Runyon,
Michael Summers
Abstract:
We argue that taxonomical concept development is vital for planetary science as in all branches of science, but its importance has been obscured by unique historical developments. The literature shows that the concept of planet developed by scientists during the Copernican Revolution was theory-laden and pragmatic for science. It included both primaries and satellites as planets due to their commo…
▽ More
We argue that taxonomical concept development is vital for planetary science as in all branches of science, but its importance has been obscured by unique historical developments. The literature shows that the concept of planet developed by scientists during the Copernican Revolution was theory-laden and pragmatic for science. It included both primaries and satellites as planets due to their common intrinsic, geological characteristics. About two centuries later the non-scientific public had just adopted heliocentrism and was motivated to preserve elements of geocentrism including teleology and the assumptions of astrology. This motivated development of a folk concept of planet that contradicted the scientific view. The folk taxonomy was based on what an object orbits, making satellites out to be non-planets and ignoring most asteroids. Astronomers continued to keep primaries and moons classed together as planets and continued teaching that taxonomy until the 1920s. The astronomical community lost interest in planets ca. 1910 to 1955 and during that period complacently accepted the folk concept. Enough time has now elapsed so that modern astronomers forgot this history and rewrote it to claim that the folk taxonomy is the one that was created by the Copernican scientists. Starting ca. 1960 when spacecraft missions were developed to send back detailed new data, there was an explosion of publishing about planets including the satellites, leading to revival of the Copernican planet concept. We present evidence that taxonomical alignment with geological complexity is the most useful scientific taxonomy for planets. It is this complexity of both primary and secondary planets that is a key part of the chain of origins for life in the cosmos.
△ Less
Submitted 22 October, 2021;
originally announced October 2021.
-
Lunar Dust Particles Blown By Lander Engine Exhaust in Rarefied and Compressible Flow
Authors:
John E. Lane,
Philip T. Metzger,
Jeffrey W. Carlson
Abstract:
Previously we presented a numerical model that predicts trajectories of lunar dust, soil, and gravel blown by the engine exhaust of a lunar lander. The model uses the gas density, velocity vector field, and temperature predicted by computational fluid dynamics (CFD) or Direct Simulation Monte Carlo (DSMC) simulations to compute the forces and accelerations acting on the regolith particles, one par…
▽ More
Previously we presented a numerical model that predicts trajectories of lunar dust, soil, and gravel blown by the engine exhaust of a lunar lander. The model uses the gas density, velocity vector field, and temperature predicted by computational fluid dynamics (CFD) or Direct Simulation Monte Carlo (DSMC) simulations to compute the forces and accelerations acting on the regolith particles, one particle at a time (ignoring particle collisions until more advanced models are developed). Here we present significant improvements to the model, including the implementation of particle drag and lift formulas to account for the rarefaction and compressibility of the flow. It turns out that the drag force is reduced due to the rarefaction, but the lift is increased due to several effects such as particle rotation. A data matrix of particle sizes, engine thrusts (descent and ascent values for Altair), horizontal and vertical starting distances, and lander height above ground, have been tested using the latest version of the software. These results suggest that the previously reported 3 degree trajectory angle limit can be exceeded in several cases by as much as a factor of five. Particles that originate at a height of 1 cm above the surface from an outer crater rim can be propelled to angles of 5 degrees or more. Particles that start at 10 cm above the surface can be ejected with angles of up to 15 degrees. Mechanisms responsible for placing particles at starting heights above the surface may include the kinetics of horizontal collisions, as suggested by Discrete Element Method (DEM) simulations. We also present results showing the distance particles travel and their impact velocities. We then use the model to evaluate the effectiveness of berms or other methods to block the spray of soil at a lunar landing site.
△ Less
Submitted 12 April, 2021;
originally announced April 2021.
-
ISRU Implications for Lunar and Martian Plume Effects
Authors:
Philip T. Metzger,
Xiaoyi Li,
Christopher D. Immer,
John E. Lane
Abstract:
Experiments, analyses, and simulations have shown that the engine exhaust plume of a Mars lander large enough for human spaceflight will create a deep crater in the martian soil, blowing ejecta to approximately 1 km distance, damaging the bottom of the lander with high-momentum rock impacts, and possibly tilting the lander as the excavated hole collapses to become a broad residual crater upon engi…
▽ More
Experiments, analyses, and simulations have shown that the engine exhaust plume of a Mars lander large enough for human spaceflight will create a deep crater in the martian soil, blowing ejecta to approximately 1 km distance, damaging the bottom of the lander with high-momentum rock impacts, and possibly tilting the lander as the excavated hole collapses to become a broad residual crater upon engine cutoff. Because of this, we deem that we will not have adequate safety margins to land humans on Mars unless we robotically stabilize the soil to form in situ landing pads prior to the mission. It will take a significant amount of time working in a harsh off-planet environment to develop and certify the new technologies and procedures for in situ landing pad construction. The only place to reasonably accomplish this is on the Moon.
△ Less
Submitted 12 April, 2021;
originally announced April 2021.
-
Modification of Roberts' Theory for Rocket Exhaust Plumes Eroding Lunar Soil
Authors:
Philip T. Metzger,
John E. Lane,
Christopher D. Immer
Abstract:
Roberts' model of lunar soil erosion beneath a landing rocket has been updated in several ways to predict the effects of future lunar landings. The model predicts, among other things, the number of divots that would result on surrounding hardware due to the impact of high velocity particulates, the amount and depth of surface material removed, the volume of ejected soil, its velocity, and the dist…
▽ More
Roberts' model of lunar soil erosion beneath a landing rocket has been updated in several ways to predict the effects of future lunar landings. The model predicts, among other things, the number of divots that would result on surrounding hardware due to the impact of high velocity particulates, the amount and depth of surface material removed, the volume of ejected soil, its velocity, and the distance the particles travel on the Moon. The results are compared against measured results from the Apollo program and predictions are made for mitigating the spray around a future lunar outpost.
△ Less
Submitted 12 April, 2021;
originally announced April 2021.
-
Cratering of Soil by Impinging Jets of Gas, with Application to Landing Rockets on Planetary Surfaces
Authors:
Philip T. Metzger,
Bruce T. Vu,
D. E. Taylor,
M. J. Kromann,
M. Fuchs,
B. Yutko,
Adam Dokos,
Christopher D. Immer,
John E. Lane,
M. B. Dunkel,
Carly M. Donahue,
Robert C. Latta III
Abstract:
Several physical mechanisms are involved in excavating granular materials beneath a vertical jet of gas. These occur, for example, beneath the exhaust plume of a rocket landing on the soil of the Moon or Mars. A series of experiments and simulations have been performed to provide a detailed view of the complex gas/soil interactions. Measurements have also been taken from the Apollo lunar landing v…
▽ More
Several physical mechanisms are involved in excavating granular materials beneath a vertical jet of gas. These occur, for example, beneath the exhaust plume of a rocket landing on the soil of the Moon or Mars. A series of experiments and simulations have been performed to provide a detailed view of the complex gas/soil interactions. Measurements have also been taken from the Apollo lunar landing videos and from photographs of the resulting terrain, and these help to demonstrate how the interactions extrapolate into the lunar environment. It is important to understand these processes at a fundamental level to support the on-going design of higher-fidelity numerical simulations and larger-scale experiments. These are needed to enable future lunar exploration wherein multiple hardware assets will be placed on the Moon within short distances of one another. The high-velocity spray of soil from landing spacecraft must be accurately predicted and controlled lest it erosively damage the surrounding hardware.
△ Less
Submitted 12 April, 2021;
originally announced April 2021.
-
Empirical Scaling Laws of Rocket Exhaust Cratering
Authors:
Carly M. Donohue,
Philip T. Metzger,
Christopher D. Immer
Abstract:
When launching or landing a spacecraft on the regolith of a terrestrial surface, special attention needs to be paid to the rocket exhaust cratering effects. If the effects are not controlled, the rocket cratering could damage the spacecraft or other surrounding hardware. The cratering effects of a rocket landing a planet's surface are not understood well, especially for the lunar case with the plu…
▽ More
When launching or landing a spacecraft on the regolith of a terrestrial surface, special attention needs to be paid to the rocket exhaust cratering effects. If the effects are not controlled, the rocket cratering could damage the spacecraft or other surrounding hardware. The cratering effects of a rocket landing a planet's surface are not understood well, especially for the lunar case with the plume expanding in vacuum. As a result, the blast effects cannot be estimated sufficiently using analytical theories. It is necessary to develop physics-based simulation tools in order to calculate mission-essential parameters. In this work we test out the scaling laws of the physics in regard to growth rate of the crater depth. This will provide the physical insight necessary to begin the physics-based modeling.
△ Less
Submitted 11 April, 2021;
originally announced April 2021.
-
Understanding and Mitigating Plume Effects During Powered Descents on the Moon and Mars
Authors:
Ryan N. Watkins,
Philip T. Metzger,
Manish Mehta,
Daoru Han,
Parvathy Prem,
Laurent Sibille,
Adrienne Dove,
Bradley Jolliff,
Daniel P. Moriarty III,
Donald C. Barker,
Ed Patrick,
Matthew Kuhns,
Michael Laine
Abstract:
This 2020 Decadal Survey White Paper reviews what is known about lunar and martian lander Plume Surface Interactions (PSI) during powered descent. This includes an overview of the phenomenology and a description of the induced hardware and environmental impacts. Then it provides an overview of mitigation techniques and a summary of the outstanding questions and strategic knowledge gaps. It finishe…
▽ More
This 2020 Decadal Survey White Paper reviews what is known about lunar and martian lander Plume Surface Interactions (PSI) during powered descent. This includes an overview of the phenomenology and a description of the induced hardware and environmental impacts. Then it provides an overview of mitigation techniques and a summary of the outstanding questions and strategic knowledge gaps. It finishes with five recommendations: to include dedicated descent imagers on every surface mission so that PSI can be directly recorded and reviewed by ground teams; as far as possible, to make all data related to PSI effects publicly accessible; to develop methods and instruments for making key measurements of PSI; to assess and record key flight data; and to invest funding into studies of long-term infrastructure architectures and mitigation techniques.
△ Less
Submitted 24 February, 2021;
originally announced February 2021.
-
Magneto-Seebeck microscopy of domain switching in collinear antiferromagnet CuMnAs
Authors:
Tomas Janda,
Joao Godinho,
Tomas Ostatnicky,
Emanuel Pfitzner,
Georg Ulrich,
Arne Hoehl,
Sonka Reimers,
Zbynek Soban,
Thomas Metzger,
Helena Reichlova,
Vít Novák,
Richard Campion,
Joachim Heberle,
Peter Wadley,
Kevin Edmonds,
Ollie Amin,
Jas Chauhan,
Sarnjeet Dhesi,
Francesco Maccherozzi,
Ruben Otxoa,
Pierre Roy,
Kamil Olejnik,
Petr Němec,
Tomas Jungwirth,
Bernd Kaestner
, et al. (1 additional authors not shown)
Abstract:
Antiferromagnets offer spintronic device characteristics unparalleled in ferromagnets owing to their lack of stray fields, THz spin dynamics, and rich materials landscape. Microscopic imaging of aniferromagnetic domains is one of the key prerequisites for understading physical principles of the device operation. However, adapting common magnetometry techniques to the dipolar-field-free antiferroma…
▽ More
Antiferromagnets offer spintronic device characteristics unparalleled in ferromagnets owing to their lack of stray fields, THz spin dynamics, and rich materials landscape. Microscopic imaging of aniferromagnetic domains is one of the key prerequisites for understading physical principles of the device operation. However, adapting common magnetometry techniques to the dipolar-field-free antiferromagnets has been a major challenge. Here we demonstrate in a collinear antiferromagnet a thermoelectric detection method by combining the magneto-Seebeck effect with local heat gradients generated by scanning far-field or near-field techniques. In a 20 nm epilayer of uniaxial CuMnAs we observe reversible 180 deg switching of the Néel vector via domain wall displacement, controlled by the polarity of the current pulses. We also image polarity-dependent 90 deg switching of the Néel vector in a thicker biaxial film, and domain shattering induced at higher pulse amplitudes. The antiferromagnetic domain maps obtained by our laboratory technique are compared to measurements by the established synchrotron microscopy using X-ray magnetic linear dichroism.
△ Less
Submitted 11 April, 2020;
originally announced April 2020.
-
HV discharges triggered by dual- and triple-frequency laser filaments
Authors:
Thomas Produit,
Pierre Walch,
Guillaume Schimmel,
Benoît Mahieu,
Clemens Herkommer,
Robert Jung,
Thomas Metzger,
Knut Michel,
Yves-Bernard André,
André Mysyrowicz,
Aurélien Houard,
Jérôme Kasparian,
Jean-Pierre Wolf
Abstract:
We study the use of frequency upconversion schemes of near-IR picosecond laser pulses and compare their ability to guide and trigger electric discharges through filamentation in air. Upconversion, such as Second Harmonic Generation, is favorable for triggering electric discharges for given amount of available laser energy, even taking into account the losses inherent to frequency conversion. We fo…
▽ More
We study the use of frequency upconversion schemes of near-IR picosecond laser pulses and compare their ability to guide and trigger electric discharges through filamentation in air. Upconversion, such as Second Harmonic Generation, is favorable for triggering electric discharges for given amount of available laser energy, even taking into account the losses inherent to frequency conversion. We focus on the practical question of optimizing the use of energy from a given available laser system and the potential advantage to use frequency conversion schemes.
△ Less
Submitted 11 April, 2019;
originally announced April 2019.
-
The Reclassification of Asteroids from Planets to Non-Planets
Authors:
Philip T. Metzger,
Mark V. Sykes,
Alan Stern,
Kirby Runyon
Abstract:
It is often claimed that asteroids' sharing of orbits is the reason they were re-classified from planets to non-planets. A critical review of the literature from the 19th Century to the present shows this is factually incorrect. The literature shows the term asteroid was broadly recognized as a subset of planet for 150 years. On-going discovery of asteroids resulted in a de facto stretching of the…
▽ More
It is often claimed that asteroids' sharing of orbits is the reason they were re-classified from planets to non-planets. A critical review of the literature from the 19th Century to the present shows this is factually incorrect. The literature shows the term asteroid was broadly recognized as a subset of planet for 150 years. On-going discovery of asteroids resulted in a de facto stretching of the concept of planet to include the ever-smaller bodies. Scientists found utility in this taxonomic identification as it provided categories needed to argue for the leading hypothesis of planet formation, Laplace's nebular hypothesis. In the 1950s, developments in planet formation theory found it no longer useful to maintain taxonomic identification between asteroids and planets, Ceres being the primary exception. At approximately the same time, there was a flood of publications on the geophysical nature of asteroids showing them to be geophysically different than the large planets. This is when the terminology in asteroid publications calling them planets abruptly plunged from a high level of usage where it had hovered during the period 1801 - 1957 to a low level that held constant thereafter. This marks the point where the community effectively formed consensus that asteroids should be taxonomically distinct from planets. The evidence demonstrates this consensus formed on the basis of geophysical differences between asteroids and planets, not the sharing of orbits. We suggest attempts to build consensus around planetary taxonomy not rely on the non-scientific process of voting, but rather through precedent set in scientific literature and discourse, by which perspectives evolve with additional observations and information, just as they did in the case of asteroids.
△ Less
Submitted 7 September, 2018; v1 submitted 10 May, 2018;
originally announced May 2018.
-
High repetition rate ultrashort laser cuts a path through fog
Authors:
Lorena de la Cruz,
Elise Schubert,
Denis Mongin,
Sandro Klingebiel,
Marcel Schultze,
Thomas Metzger,
Knut Michel,
Jérôme Kasparian,
Jean-Pierre Wolf
Abstract:
We experimentally demonstrate that the transmission of a 1030~nm, 1.3~ps laser beam of 100 mJ energy through fog increases when its repetition rate increases to the kHz range. Due to the efficient energy deposition by the laser filaments in the air, a shockwave ejects the fog droplets from a substantial volume of the beam, at a moderate energy cost. This process opens prospects for applications re…
▽ More
We experimentally demonstrate that the transmission of a 1030~nm, 1.3~ps laser beam of 100 mJ energy through fog increases when its repetition rate increases to the kHz range. Due to the efficient energy deposition by the laser filaments in the air, a shockwave ejects the fog droplets from a substantial volume of the beam, at a moderate energy cost. This process opens prospects for applications requiring the transmission of laser beams through fogs and clouds.
△ Less
Submitted 25 December, 2016;
originally announced December 2016.
-
Affordable, Rapid Bootstrapping of the Space Industry and Solar System Civilization
Authors:
Philip T. Metzger,
Anthony Muscatello,
Robert P. Mueller,
James Mantovani
Abstract:
Advances in robotics and additive manufacturing have become game-changing for the prospects of space industry. It has become feasible to bootstrap a self-sustaining, self-expanding industry at reasonably low cost. Simple modeling was developed to identify the main parameters of successful bootstrapping. This indicates that bootstrapping can be achieved with as little as 12 metric tons (MT) landed…
▽ More
Advances in robotics and additive manufacturing have become game-changing for the prospects of space industry. It has become feasible to bootstrap a self-sustaining, self-expanding industry at reasonably low cost. Simple modeling was developed to identify the main parameters of successful bootstrapping. This indicates that bootstrapping can be achieved with as little as 12 metric tons (MT) landed on the Moon during a period of about 20 years. The equipment will be teleoperated and then transitioned to full autonomy so the industry can spread to the asteroid belt and beyond. The strategy begins with a sub-replicating system and evolves it toward full self-sustainability (full closure) via an in situ technology spiral. The industry grows exponentially due to the free real estate, energy, and material resources of space. The mass of industrial assets at the end of bootstrapping will be 156 MT with 60 humanoid robots, or as high as 40,000 MT with as many as 100,000 humanoid robots if faster manufacturing is supported by launching a total of 41 MT to the Moon. Within another few decades with no further investment, it can have millions of times the industrial capacity of the United States. Modeling over wide parameter ranges indicates this is reasonable, but further analysis is needed. This industry promises to revolutionize the human condition.
△ Less
Submitted 9 December, 2016;
originally announced December 2016.
-
Dual-scale turbulence in filamenting laser beams at high average power
Authors:
Elise Schubert,
Lorena de la Cruz,
Denis Mongin,
Jérôme Kasparian,
Jean-Pierre Wolf,
Sandro Klingebiel,
Marcel Schultze,
Thomas Metzger,
Knut Michel
Abstract:
We investigate the self-induced turbulence of high repetition rate laser filaments over a wide range of average powers (1 mW to 100 W) and its sensitivity to external atmospheric turbulence. Although both externally-imposed and self-generated turbulences can have comparable magnitudes, they act on different temporal and spatial scales. While the former drives the shot-to-shot motion at the millise…
▽ More
We investigate the self-induced turbulence of high repetition rate laser filaments over a wide range of average powers (1 mW to 100 W) and its sensitivity to external atmospheric turbulence. Although both externally-imposed and self-generated turbulences can have comparable magnitudes, they act on different temporal and spatial scales. While the former drives the shot-to-shot motion at the millisecond time scale, the latter acts on the 0.5 s scale. As a consequence, their effects are decoupled, preventing beam stabilization by the thermally-induced low-density channel produced by the laser filaments.
△ Less
Submitted 11 October, 2016;
originally announced October 2016.
-
Estimation of Apollo lunar dust transport using optical extinction measurements
Authors:
John E. Lane,
Philip T. Metzger
Abstract:
A technique to estimate mass erosion rate of surface soil during landing of the Apollo Lunar Module (LM) and total mass ejected due to the rocket plume interaction is proposed and tested. The erosion rate is proportional to the product of the second moment of the lofted particle size distribution N(D), and third moment of the normalized soil size distribution S(D), divided by the integral of S(D)D…
▽ More
A technique to estimate mass erosion rate of surface soil during landing of the Apollo Lunar Module (LM) and total mass ejected due to the rocket plume interaction is proposed and tested. The erosion rate is proportional to the product of the second moment of the lofted particle size distribution N(D), and third moment of the normalized soil size distribution S(D), divided by the integral of S(D)D^2/v(D), where D is particle diameter and v(D) is the vertical component of particle velocity. The second moment of N(D) is estimated by optical extinction analysis of the Apollo cockpit video. Because of the similarity between mass erosion rate of soil as measured by optical extinction and rainfall rate as measured by radar reflectivity, traditional NWS radar/rainfall correlation methodology can be applied to the lunar soil case where various S(D) models are assumed corresponding to specific lunar sites.
△ Less
Submitted 28 February, 2015;
originally announced March 2015.
-
Photogrammetry and ballistic analysis of a high-flying projectile in the STS-124 space shuttle launch
Authors:
Philip T. Metzger,
John E. Lane,
Robert A. Carilli,
Jason M. Long,
Kathy L. Shawn
Abstract:
A method combining photogrammetry with ballistic analysis is demonstrated to identify flying debris in a rocket launch environment. Debris traveling near the STS-124 Space Shuttle was captured on cameras viewing the launch pad within the first few seconds after launch. One particular piece of debris caught the attention of investigators studying the release of flame trench fire bricks because it…
▽ More
A method combining photogrammetry with ballistic analysis is demonstrated to identify flying debris in a rocket launch environment. Debris traveling near the STS-124 Space Shuttle was captured on cameras viewing the launch pad within the first few seconds after launch. One particular piece of debris caught the attention of investigators studying the release of flame trench fire bricks because its high trajectory could indicate a flight risk to the Space Shuttle. Digitized images from two pad perimeter high-speed 16-mm film cameras were processed using photogrammetry software based on a multi-parameter optimization technique. Reference points in the image were found from 3D CAD models of the launch pad and from surveyed points on the pad. The three-dimensional reference points were matched to the equivalent two-dimensional camera projections by optimizing the camera model parameters using a gradient search optimization technique. Using this method of solving the triangulation problem, the xyz position of the object's path relative to the reference point coordinate system was found for every set of synchronized images. This trajectory was then compared to a predicted trajectory while performing regression analysis on the ballistic coefficient and other parameters. This identified, with a high degree of confidence, the object's material density and thus its probable origin within the launch pad environment. Future extensions of this methodology may make it possible to diagnose the underlying causes of debris-releasing events in near-real time, thus improving flight safety.
△ Less
Submitted 22 October, 2009;
originally announced October 2009.
-
Electric Potential Due to a System of Conducting Spheres
Authors:
Philip T. Metzger,
John E. Lane
Abstract:
Equations describing the complete series of image charges for a system of conducting spheres are presented. The method of image charges, originally described by J. C. Maxwell in 1873, has been and continues to be a useful method for solving many three dimensional electrostatic problems. Here we demonstrate that as expected when the series is truncated to any finite order N, the electric field re…
▽ More
Equations describing the complete series of image charges for a system of conducting spheres are presented. The method of image charges, originally described by J. C. Maxwell in 1873, has been and continues to be a useful method for solving many three dimensional electrostatic problems. Here we demonstrate that as expected when the series is truncated to any finite order N, the electric field resulting from the truncated series becomes qualitatively more similar to the correct field as N increases. A method of charge normalization is developed which provides significant improvement for truncated low order solutions. The formulation of the normalization technique and its solution via a matrix inversion has similarities to the method of moments, which is a numerical solution of Poisson's equation, using an integral equation for the unknown charge density with a known boundary potential. The last section of this paper presents a gradient search method to optimize a set of L point charges for M spheres. This method may use the image charge series to initialize the gradient search. We demonstrate quantitatively how the metric can be optimized by adjusting the locations and amounts of charge for the set of points, and that an optimized set of charges generally performs better than truncated normalized image charges, at the expense of gradient search iteration time.
△ Less
Submitted 8 June, 2009;
originally announced June 2009.
-
Spatial and Temporal Extrapolation of Disdrometer Size Distributions Based on a Lagrangian Trajectory Model of Falling Rain
Authors:
John E. Lane,
Takis Kasparis,
Philip T. Metzger,
W. Linwood Jones
Abstract:
Methodologies to improve disdrometer processing, loosely based on mathematical techniques common to the field of particle flow and fluid mechanics, are examined and tested. The inclusion of advection and vertical wind field estimates appears to produce significantly improved results in a Lagrangian hydrometeor trajectory model, in spite of very strict assumptions of noninteracting hydrometeors,…
▽ More
Methodologies to improve disdrometer processing, loosely based on mathematical techniques common to the field of particle flow and fluid mechanics, are examined and tested. The inclusion of advection and vertical wind field estimates appears to produce significantly improved results in a Lagrangian hydrometeor trajectory model, in spite of very strict assumptions of noninteracting hydrometeors, constant vertical air velocity, and time independent advection during a radar scan time interval. Wind field data can be extracted from each radar elevation scan by plotting and analyzing reflectivity contours over the disdrometer site and by collecting the radar radial velocity data to obtain estimates of advection. Specific regions of disdrometer spectra (drop size versus time) often exhibit strong gravitational sorting signatures, from which estimates of vertical velocity can be extracted. These independent wind field estimates can be used as initial conditions to the Lagrangian trajectory simulation of falling hydrometeors.
△ Less
Submitted 8 June, 2009;
originally announced June 2009.
-
Jet-induced cratering of a granular surface with application to lunar spaceports
Authors:
Philip T. Metzger,
Christopher D. Immer,
Carly M. Donahue,
Bruce M. Vu,
Robert C. Latta III,
Matthew Deyo-Svendsen
Abstract:
The erosion of lunar soil by rocket exhaust plumes is investigated experimentally. This has identified the diffusion-driven flow in the bulk of the sand as an important but previously unrecognized mechanism for erosion dynamics. It has also shown that slow regime cratering is governed by the recirculation of sand in the widening geometry of the crater. Scaling relationships and erosion mechanism…
▽ More
The erosion of lunar soil by rocket exhaust plumes is investigated experimentally. This has identified the diffusion-driven flow in the bulk of the sand as an important but previously unrecognized mechanism for erosion dynamics. It has also shown that slow regime cratering is governed by the recirculation of sand in the widening geometry of the crater. Scaling relationships and erosion mechanisms have been characterized in detail for the slow regime. The diffusion-driven flow occurs in both slow and fast regime cratering. Because diffusion-driven flow had been omitted from the lunar erosion theory and from the pressure cratering theory of the Apollo and Viking era, those theories cannot be entirely correct.
△ Less
Submitted 1 June, 2009;
originally announced June 2009.
-
Craters Formed in Granular Beds by Impinging Jets of Gas
Authors:
Philip T. Metzger,
Robert C. Latta III,
Jason M. Schuler,
Christopher D. Immer
Abstract:
When a jet of gas impinges vertically on a granular bed and forms a crater, the grains may be moved by several different mechanisms: viscous erosion, diffused gas eruption, bearing capacity failure, and/or diffusion-driven shearing. The relative importance of these mechanisms depends upon the flow regime of the gas, the mechanical state of the granular material, and other physical parameters. He…
▽ More
When a jet of gas impinges vertically on a granular bed and forms a crater, the grains may be moved by several different mechanisms: viscous erosion, diffused gas eruption, bearing capacity failure, and/or diffusion-driven shearing. The relative importance of these mechanisms depends upon the flow regime of the gas, the mechanical state of the granular material, and other physical parameters. Here we report research in two specific regimes: viscous erosion forming scour holes as a function of particle size and gravity; and bearing capacity failure forming deep transient craters as a function of soil compaction.
△ Less
Submitted 29 May, 2009;
originally announced May 2009.
-
X-ray pushing of a mechanical microswing
Authors:
A. Siria,
M. S. Rodrigues,
O. Dhez,
W. Schwartz,
G. Torricelli,
S. Le Denmat,
N. Rochat,
G. Auvert,
O. Bikondoa,
T. H. Metzger,
D. Wermeille,
R. Felici,
F. Comin,
J. Chevrier
Abstract:
Nanoelectromechanical Systems (NEMS) are among the best candidates to measure interactions at nanoscale [1-6], especially when resonating oscillators are used with high quality factor [7, 8]. Despite many efforts [9, 10], efficient and easy actuation in NEMS remains an issue [11]. The mechanism that we propose, thermally mediated Center Of Mass (COM) displacements, represents a new actuation sch…
▽ More
Nanoelectromechanical Systems (NEMS) are among the best candidates to measure interactions at nanoscale [1-6], especially when resonating oscillators are used with high quality factor [7, 8]. Despite many efforts [9, 10], efficient and easy actuation in NEMS remains an issue [11]. The mechanism that we propose, thermally mediated Center Of Mass (COM) displacements, represents a new actuation scheme for NEMS and MEMS. To demonstrate this scheme efficiency we show how mechanical nanodis- placements of a MEMS is triggered using modulated X-ray microbeams. The MEMS is a microswing constituted by a Ge microcrystal attached to a Si microcantilever. The interaction is mediated by the Ge absorption of the intensity modulated X-ray microbeam impinging on the microcrystal. The small but finite thermal expansion of the Ge microcrystal is large enough to force a nanodisplacement of the Ge microcrystal COM glued on a Si microlever. The inverse mechanism can be envisaged: MEMS can be used to shape X-ray beams. A Si microlever can be a high frequency X-ray beam chopper for time studies in biology and chemistry.
△ Less
Submitted 22 January, 2008; v1 submitted 14 January, 2008;
originally announced January 2008.
