-
Light-Generating CdSe/CdS Colloidal Quantum Dot-Doped Plastic Optical Fibers
Authors:
Carly A. Whittaker,
Arthur Perret,
Charles W. Fortier,
Olivier-Michel Tardif,
Sébastien A. Lamarre,
Steeve Morency,
Dominic Larivière,
Luc Beaulieu,
Younès Messaddeq,
Claudine Nì. Allen
Abstract:
Colloidal quantum dots (cQDs) are now a mature nanomaterial with optical properties customizable through varying size and composition. However, their use in optical devices is limited as they are not widely available in convenient forms such as optical fibers. With advances in polymerization methods incorporating nanocrystals, nanocomposite materials suitable for processing into high quality hybri…
▽ More
Colloidal quantum dots (cQDs) are now a mature nanomaterial with optical properties customizable through varying size and composition. However, their use in optical devices is limited as they are not widely available in convenient forms such as optical fibers. With advances in polymerization methods incorporating nanocrystals, nanocomposite materials suitable for processing into high quality hybrid active fibers can be achieved. We demonstrate a plastic optical fiber fabrication method which ensures homogeneous dispersion of cQDs within a polymer core matrix. Loading concentrations between 10$^{11}$-10$^{13}$ CdSe/CdS cQDs per cm$^{3}$ in polystyrene were electronically imaged, confirming only sporadic sub-wavelength aggregates. Rayleigh scattering losses are therefore dominant at energies below the semiconductors' band gap, but are overtaken by a sharp CdS-related absorption onset around 525 nm facilitating cQD excitation. The redshifted photoluminescence emission is then minimally reabsorbed along the fiber with a spectrum barely affected by the polymerization and a quantum yield staying at $\sim$65$\%$ of its initial value. The latter, along with the glass transition temperature and refractive index, is independent of the cQD concentration hence yielding a proportionally increasing light output. Our cQD-doped fibers are photostable to within 5$\%$ over days showing great promise for functional material applications.
△ Less
Submitted 6 June, 2020;
originally announced June 2020.
-
Erbium-doped aluminophosphosilicate all-fiber laser operating at 1584 nm
Authors:
Marie-Pier Lord,
Lauris Talbot,
Olivier Boily,
Tommy Boilard,
Guillaume Gariépy,
Sacha Grelet,
Pascal Paradis,
Nicolas Grégoire,
Steeve Morency,
Younès Messaddeq,
Martin Bernier
Abstract:
We report on an ytterbium-free erbium-doped aluminophosphosilicate all-fiber laser, producing an output power of 25 W at a wavelength of 1584 nm with a slope efficiency of 30% with respect to the 976 nm absorbed pump power. The simple cavity design proposed takes advantage of fiber Bragg gratings written directly in the gain fiber. The single-mode erbium-doped aluminophosphosilicate fiber was fabr…
▽ More
We report on an ytterbium-free erbium-doped aluminophosphosilicate all-fiber laser, producing an output power of 25 W at a wavelength of 1584 nm with a slope efficiency of 30% with respect to the 976 nm absorbed pump power. The simple cavity design proposed takes advantage of fiber Bragg gratings written directly in the gain fiber. The single-mode erbium-doped aluminophosphosilicate fiber was fabricated in-house and was doped with 0.06 mol.% of Er2O3, 1.77 mol.% of Al2O3 and 1.04 mol.% of P2O5. The incorporation of aluminium and phosphorus into the fiber core allowed for an increased concentration of erbium without inducing significant clustering, while keeping the numerical aperture low to ensure a single-mode laser operation.
△ Less
Submitted 15 October, 2019;
originally announced October 2019.
-
Atomic level structure of Ge-Sb-S glasses: chemical short range order and long Sb-S bonds
Authors:
Ildikó Pethes,
Virginie Nazabal,
Julien Ari,
Ivan Kaban,
Jacques Darpentigny,
Edmund Welter,
Olof Gutowski,
Bruno Bureau,
Younès Messaddeq,
Pál Jóvári
Abstract:
The structure of Ge$_{20}$Sb$_{10}$S$_{70}$, Ge$_{23}$Sb$_{12}$S$_{65}$ and Ge$_{26}$Sb$_{13}$S$_{61}$ glasses was investigated by neutron diffraction (ND), X-ray diffraction (XRD), extended X-ray absorption fine structure (EXAFS) measurements at the Ge and Sb K-edges as well as Raman scattering. For each composition, large scale structural models were obtained by fitting simultaneously diffractio…
▽ More
The structure of Ge$_{20}$Sb$_{10}$S$_{70}$, Ge$_{23}$Sb$_{12}$S$_{65}$ and Ge$_{26}$Sb$_{13}$S$_{61}$ glasses was investigated by neutron diffraction (ND), X-ray diffraction (XRD), extended X-ray absorption fine structure (EXAFS) measurements at the Ge and Sb K-edges as well as Raman scattering. For each composition, large scale structural models were obtained by fitting simultaneously diffraction and EXAFS data sets in the framework of the reverse Monte Carlo (RMC) simulation technique. Ge and S atoms have 4 and 2 nearest neighbors, respectively. The structure of these glasses can be described by the chemically ordered network model: Ge-S and Sb-S bonds are always preferred. These two bond types adequately describe the structure of the stoichiometric glass while S-S bonds can also be found in the S-rich composition. Raman scattering data show the presence of Ge-Ge, Ge-Sb and Sb-Sb bonds in the S-deficient glass but only Ge-Sb bonds are needed to fit diffraction and EXAFS datasets. A significant part of the Sb-S pairs has 0.3-0.4 Å longer bond distance than the usually accepted covalent bond length (~2.45 Å). From this observation it was inferred that a part of Sb atoms have more than 3 S neighbors.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
Integrated cladding-pumped multi-core, few-mode erbium-doped fibre amplifier for space-division multiplexed communications
Authors:
H. Chen,
C. Jin,
B. Huang,
N. K. Fontaine,
R. Ryf,
K. Shang,
N. Grégoire,
S. Morency,
R. -J. Essiambre,
G. Li,
Y. Messaddeq,
S. LaRochelle
Abstract:
Space-division multiplexing (SDM), whereby multiple spatial channels in multimode and multicore optical fibers are used to increase the total transmission capacity per fiber, is being investigated to avert a data capacity crunch and reduce the cost per transmitted bit. With the number of channels employed in SDM transmission experiments continuing to rise, there is a requirement for integrated SDM…
▽ More
Space-division multiplexing (SDM), whereby multiple spatial channels in multimode and multicore optical fibers are used to increase the total transmission capacity per fiber, is being investigated to avert a data capacity crunch and reduce the cost per transmitted bit. With the number of channels employed in SDM transmission experiments continuing to rise, there is a requirement for integrated SDM components that are scalable. Here, we demonstrate a cladding-pumped SDM erbium-doped fiber amplifier (EDFA) that consists of six uncoupled multimode erbium-doped cores. Each core supports three spatial modes, which enables the EDFA to amplify a total of 18 spatial channels simultaneously with a single pump diode and a complexity similar to a single-mode EDFA. The amplifier delivers more than 20-dBm total output power per core and less than 7-dB noise figure over the C-band. This cladding-pumped EDFA enables combined space-division and wavelength-division multiplexed transmission over multiple multimode fiber spans.
△ Less
Submitted 19 March, 2017;
originally announced March 2017.
-
Femtosecond Self-Reconfiguration of Laser-Induced Plasma Patterns in Dielectrics
Authors:
Jean-Luc Déziel,
Louis J. Dubé,
Sandra H. Messaddeq,
Younès Messaddeq,
Charles Varin
Abstract:
Laser-induced modification of transparent solids by intense femtosecond laser pulses allows fast integration of nanophotonic and nanofluidic devices with controlled optical properties. So far, the local and dynamic nature of the interactions between plasma and light needed to correctly explain nanograting fabrication on dielectric surfaces has been missing in the theoretical models. With our numer…
▽ More
Laser-induced modification of transparent solids by intense femtosecond laser pulses allows fast integration of nanophotonic and nanofluidic devices with controlled optical properties. So far, the local and dynamic nature of the interactions between plasma and light needed to correctly explain nanograting fabrication on dielectric surfaces has been missing in the theoretical models. With our numerical approach, we show that a self-consistent dynamic treatment of the plasma formation and its interaction with light triggers an ultrafast reconfiguration of the periodic plasma patterns on a field-cycle time scale. Within this framework, a simple stability analysis of the local interactions explains how the laser-induced plasma patterns change their orientation with respect to the incident light polarization, when a certain energy density threshold is reached. Moreover, the reconfigured sub-wavelength plasma structures grow into the bulk of the sample and agree with the experimental findings of self-organized volume nanogratings. Mode coupling of the incident and transversally scattered light with the periodic plasma structures is sufficient to initiate the growth and the self-organization of the characteristic pattern with a periodicity of a half-wavelength in the medium.
△ Less
Submitted 9 May, 2018; v1 submitted 8 February, 2017;
originally announced February 2017.
-
Constructive feedback for the growth of laser-induced periodic surface structures
Authors:
Jean-Luc Déziel,
Joey Dumont,
Denis Gagnon,
Louis J. Dubé,
Sandra H. Messaddeq,
Younès Messaddeq
Abstract:
We study the formation and growth of laser-induced periodic surface structures (LIPSSs) with the finite-difference time-domain (FDTD) method. We use a recently proposed inter-pulse feedback method to account for the evolution of the surface morphology between each laser pulse sent to the surface of the processed material. This method has been used with an ablation-like mechanism, by removing mater…
▽ More
We study the formation and growth of laser-induced periodic surface structures (LIPSSs) with the finite-difference time-domain (FDTD) method. We use a recently proposed inter-pulse feedback method to account for the evolution of the surface morphology between each laser pulse sent to the surface of the processed material. This method has been used with an ablation-like mechanism, by removing material exposed to a light intensity higher than a given threshold. We propose an inverse mechanism, an expansion-like mechanism, able to grow structures that the ablation-like process cannot. This allows us to introduce the notions of constructive and destructive feedback and explains a strong contradiction between the standard Sipe-Drude theory and the experimental observations, i. e. the formation on metals of structures usually linked to wide band gap dielectrics.
△ Less
Submitted 9 July, 2015;
originally announced July 2015.
-
Toward the formation of crossed laser-induced periodic surface structures
Authors:
Jean-Luc Déziel,
Joey Dumont,
Denis Gagnon,
Louis J. Dubé,
Sandra Messaddeq,
Younès Messaddeq
Abstract:
The formation of a new type of laser-induced periodic surface structures using a femtosecond pulsed laser is studied on the basis of the Sipe-Drude theory solved with a FDTD scheme. Our numerical results indicate the possibility of coexisting structures parallel and perpendicular to the polarization of the incident light for low reduced collision frequency ($γ/ω\lesssim 1/4$, where $ω$ is the la…
▽ More
The formation of a new type of laser-induced periodic surface structures using a femtosecond pulsed laser is studied on the basis of the Sipe-Drude theory solved with a FDTD scheme. Our numerical results indicate the possibility of coexisting structures parallel and perpendicular to the polarization of the incident light for low reduced collision frequency ($γ/ω\lesssim 1/4$, where $ω$ is the laser frequency). Moreover, these structures have a periodicity of $Λ\sim λ$ in both orientations. To explain this behavior, light-matter interaction around a single surface inhomogeneity is also studied and confirms the simultaneous presence of surface plasmon polaritons and radiation remnants in orthogonal orientations at low $γ/ω$ values.
△ Less
Submitted 23 March, 2015; v1 submitted 2 October, 2014;
originally announced October 2014.
