Showing 1–50 of 80 results for author: Mendez, A

POD-Based Sparse Stochastic Estimation of Wind Turbine Blade Vibrations

Authors: Lorenzo Schena, Wim Munters, Jan Helsen, Miguel A. Mendez

Abstract: This study presents a framework for estimating the full vibrational state of wind turbine blades from sparse deflection measurements. The identification is performed in a reduced-order space obtained from a Proper Orthogonal Decomposition (POD) of high-fidelity aeroelastic simulations based on Geometrically Exact Beam Theory (GEBT). In this space, a Reduced Order Model (ROM) is constructed using a… ▽ More This study presents a framework for estimating the full vibrational state of wind turbine blades from sparse deflection measurements. The identification is performed in a reduced-order space obtained from a Proper Orthogonal Decomposition (POD) of high-fidelity aeroelastic simulations based on Geometrically Exact Beam Theory (GEBT). In this space, a Reduced Order Model (ROM) is constructed using a linear stochastic estimator, and further enhanced through Kalman fusion with a quasi-steady model of azimuthal dynamics driven by measured wind speed. The performance of the proposed estimator is assessed in a synthetic environment replicating turbulent inflow and measurement noise over a wide range of operating conditions. Results demonstrate the method's ability to accurately reconstruct three-dimensional deformations and accelerations using noisy displacement and acceleration measurements at only four spatial locations. These findings highlight the potential of the proposed framework for real-time blade monitoring, optimal sensor placement, and active load control in wind turbine systems. △ Less

Submitted 11 April, 2025; originally announced April 2025.

Integral modelling and Reinforcement Learning control of 3D liquid metal coating on a moving substrate

Authors: Fabio Pino, Edoardo Fracchia, Benoit Scheid, Miguel A. Mendez

Abstract: Metallic coatings are used to improve the durability of metal surfaces, protecting them from corrosion. These protective layers are typically deposited in a fluid state via a liquid film. Controlling instabilities in the liquid film is crucial for achieving uniform and high-quality coatings. This study explores the possibility of controlling liquid films on a moving substrate using a combination o… ▽ More Metallic coatings are used to improve the durability of metal surfaces, protecting them from corrosion. These protective layers are typically deposited in a fluid state via a liquid film. Controlling instabilities in the liquid film is crucial for achieving uniform and high-quality coatings. This study explores the possibility of controlling liquid films on a moving substrate using a combination of gas jets and electromagnetic actuators. To model the 3D liquid film, we extend existing integral models to incorporate the effects of electromagnetic actuators. The control strategy was developed within a reinforcement learning framework, where the Proximal Policy Optimization (PPO) algorithm interacts with the liquid film via pneumatic and electromagnetic actuators to optimize a reward function, accounting for the amplitude of the instability waves through a trial and error process. The PPO found an optimal control law, which successfully reduced interface instabilities through a novel control mechanism, where gas jets push crests and electromagnets raise troughs using the Lorentz force. △ Less

Submitted 18 March, 2025; originally announced March 2025.

Southern binaries with the Zorro Speckle Camera @ Gemini-South

Authors: Rene A. Mendez, Andrei Tokovinin, Edgardor Costa, Max Dirk

Abstract: We present measurements in the context of a survey of southern hemisphere binary and multiple stellar systems observed with the Zorro Speckle dual diffraction-limited optical imaging camera on the 8.1m Gemini-South telescope carried out between 2019 and 2023. The overall motivation of our survey, as well as some initial results of these observations, are outlined to demonstrate the capabilities -… ▽ More We present measurements in the context of a survey of southern hemisphere binary and multiple stellar systems observed with the Zorro Speckle dual diffraction-limited optical imaging camera on the 8.1m Gemini-South telescope carried out between 2019 and 2023. The overall motivation of our survey, as well as some initial results of these observations, are outlined to demonstrate the capabilities - and limitations - of Zorro. We report on the astrometric characterization of the instrument in terms of the precision and accuracy of our measurements and provide details of our custom-made data reduction pipeline. For targets with separations smaller than 0.4 arcsec, an overall precision of 1 mas in the radial and tangential directions is obtained, while the uncertainty in position angle is 0.2 deg. Relative astrometry and contrast brightness in the two Zorro filters at 562 and 832 nm are reported for 70 pairs on 64 distinct systems (six are triples). Eleven new binaries are found, mostly of small separations (down to 15 mas), and large brightness contrast (up to Delta m=6 in the red channel). Our results indicate that the Zorro instrument, when properly calibrated, delivers excellent quality data for visual binary studies of tight and/or faint companions. △ Less

Submitted 11 March, 2025; originally announced March 2025.

Comments: 47 pages, 19 figures, 5 tables. Accepted for publication in The Astronomical Journal

Meshless Super-Resolution of Scattered Data via constrained RBFs and KNN-Driven Densification

Authors: Iacopo Tirelli, Miguel Alfonso Mendez, Andrea Ianiro, Stefano Discetti

Abstract: We propose a novel meshless method to achieve super-resolution from scattered data obtained from sparse, randomly-positioned sensors such as the particle tracers of particle tracking velocimetry. The method combines K-Nearest Neighbor Particle Tracking Velocimetry (KNN-PTV, Tirelli et al. 2023) with meshless Proper Orthogonal Decomposition (meshless POD, Tirelli et al. 2025) and constrained Radial… ▽ More We propose a novel meshless method to achieve super-resolution from scattered data obtained from sparse, randomly-positioned sensors such as the particle tracers of particle tracking velocimetry. The method combines K-Nearest Neighbor Particle Tracking Velocimetry (KNN-PTV, Tirelli et al. 2023) with meshless Proper Orthogonal Decomposition (meshless POD, Tirelli et al. 2025) and constrained Radial Basis Function regression (c-RBFs, Sperotto et al. 2022). The main idea is to use KNN-PTV to enhance the spatial resolution of flow fields by blending data from \textit{locally similar} flow regions available in the time series. This \textit{similarity} is assessed in terms of statistical coherency with leading features, identified by meshless POD directly on the scattered data without the need to first interpolate onto a grid, but instead relying on RBFs to compute all the relevant inner products. Lastly, the proposed approach uses the c-RBF on the denser scattered distributions to derive an analytical representation of the flow fields that incorporates physical constraints. This combination is meshless because it does not require the definition of a grid at any step of the calculation, thus providing flexibility in handling complex geometries. The algorithm is validated on 3D measurements of a jet flow in air. The assessment covers three key aspects: statistics, spectra, and modal analysis. The proposed method is evaluated against standard Particle Image Velocimetry, KNN-PTV, and c-RBFs. The results demonstrate improved accuracy, with an average error on the order of 11%, compared to 13-14% for the other methods. Additionally, the proposed method achieves an increase in the cutoff frequency of approximately 3-4/D, compared to the values observed in the competing approaches. Furthermore, it shows nearly half the errors in low-order reconstructions. △ Less

Submitted 6 March, 2025; originally announced March 2025.

Statistical Methods and Modal Decompositions for Gridded and Scattered Data: Meshless Statistics and Meshless Data Driven Modal Analysis

Authors: Miguel A. Mendez, Manuel Ratz, Damien Rigutto

Abstract: Statistical tools are crucial for studying and modeling turbulent flows, where chaotic velocity fluctuations span a wide range of spatial and temporal scales. Advances in image velocimetry, especially in tracking-based methods, now allow for high-speed, high-density particle image processing, enabling the collection of detailed 3D flow fields. This lecture provides a set of tutorials on processing… ▽ More Statistical tools are crucial for studying and modeling turbulent flows, where chaotic velocity fluctuations span a wide range of spatial and temporal scales. Advances in image velocimetry, especially in tracking-based methods, now allow for high-speed, high-density particle image processing, enabling the collection of detailed 3D flow fields. This lecture provides a set of tutorials on processing such datasets to extract essential quantities like averages, second-order moments (turbulent stresses) and coherent patterns using modal decompositions such as the Proper Orthogonal Decomposition (POD). After a brief review of the fundamentals of statistical and modal analysis, the lecture delves into the challenges of processing scattered data from tracking velocimetry, comparing it to traditional gridded-data approaches. It also covers research topics, including physics-based Radial Basis Function (RBF) regression for meshless computation of turbulent statistics and the definition of an RBF inner product, which enables meshless computation of data-driven decompositions. These include traditional methods like Proper Orthogonal Decomposition (POD) and Dynamic Mode Decomposition (DMD), as well as advanced variants such as Spectral POD (SPOD) and Multiscale POD (mPOD). We refer to this approach as the "Meshless Data-Driven Decomposition" framework. All codes are available at https://github.com/mendezVKI/PIV_LS_2024_Signal △ Less

Submitted 18 February, 2025; v1 submitted 7 February, 2025; originally announced February 2025.

Comments: Book in preparation! Chapter from VKI Lecture Series "Particle Image Velocimetry 2024", held at the von Karman Institute, 2-5 December 2024

Raspberry Pi multispectral imaging camera system (PiMICS): a low-cost, skills-based physics educational tool

Authors: John C. Howell, Brian Flores, Juan Javier Naranjo, Angel Mendez, Cesar Costa-Vera, Chris Koumriqian, Juliana Jordan, Pieter H. Neethling, Calvin Groenewald, Michael A. C. Lovemore, Patrick A. T. Kinsey, Tjaart P. J. Kruger

Abstract: We report on an educational pilot program for low-cost physics experimentation run in Ecuador, South Africa, and the United States. The program was developed after having needs-based discussions with African educators, researchers, and leaders. It was determined that the need and desire for low-cost, skills-building, and active-learning tools is very high. From this, we developed a 3D-printable, R… ▽ More We report on an educational pilot program for low-cost physics experimentation run in Ecuador, South Africa, and the United States. The program was developed after having needs-based discussions with African educators, researchers, and leaders. It was determined that the need and desire for low-cost, skills-building, and active-learning tools is very high. From this, we developed a 3D-printable, Raspberry Pi-based multispectral camera (15 to 25 spectral channels in the visible and near-IR) for as little as $100. The program allows students to learn 3D modeling, 3D printing, feedback, control, image analysis, Python programming, systems integration and artificial intelligence as well as spectroscopy. After completing their cameras, the students in the program studied plant health, plant stress, post-harvest fruit ripeness, and polarization and spectral analysis of nanostructured insect wings, the latter of which won the ``best-applied research" award at a conference poster session and will be highlighted in this paper. Importantly, these cameras can be an integral part of any developing country's agricultural, recycling, medical, and pharmaceutical infrastructure. Thus, we believe this experiment can play an important role at the intersection of student training and developing countries' capacity building. △ Less

Submitted 5 December, 2024; originally announced December 2024.

The d-electron contribution to the stopping power of transition metals

Authors: J. P. Peralta, A. M. P. Mendez, D. M. Mitnik, C. C. Montanari

Abstract: We present a new non-perturbative model to describe the stopping power by ionization of the $d$-electrons of transition metals. These metals are characterized by the filling of the d-subshell and the promotion of part of the electrons to the conduction band. The contribution of d-electrons at low-impact energies has been noted experimentally in the past as a break of the linear dependence of the s… ▽ More We present a new non-perturbative model to describe the stopping power by ionization of the $d$-electrons of transition metals. These metals are characterized by the filling of the d-subshell and the promotion of part of the electrons to the conduction band. The contribution of d-electrons at low-impact energies has been noted experimentally in the past as a break of the linear dependence of the stopping power with the ion velocity. In this contribution, we describe the response of these electrons considering the atomic "inhomogeneous" momentum distribution. We focus on the transition metals of Groups 10 and 11 in the periodic table: Ni, Pd, Pt, Cu, Ag, and Au. Results describe the low energy-stopping power, with good agreement with the experimental data and available TDDFT results. By combining the present non-perturbative model for the $d$-subshell contribution with other approaches for the valence electrons and for the inner shells, we provide a coherent theoretical method capable of describing the stopping power of these transition metals from the very low to the high energy region. △ Less

Submitted 19 November, 2024; originally announced November 2024.

Comments: 13 figures. Manuscript submitted to Physical Review A, under evaluation

On the low drag regime of flatback airfoils

Authors: Konstantinos Kellaris, George Papadakis, Miguel Alfonso Mendez, Marinos Manolesos

Abstract: Flatback airfoils, characterized by a blunt trailing edge, are used at the root of large wind turbine blades. A low-drag pocket has recently been identified in the flow past these airfoils at high angles of attack, potentially offering opportunities for enhanced energy extraction. This study uses three-dimensional Detached Eddy Simulations (DES) combined with statistical and data-driven modal anal… ▽ More Flatback airfoils, characterized by a blunt trailing edge, are used at the root of large wind turbine blades. A low-drag pocket has recently been identified in the flow past these airfoils at high angles of attack, potentially offering opportunities for enhanced energy extraction. This study uses three-dimensional Detached Eddy Simulations (DES) combined with statistical and data-driven modal analysis techniques to explore the aerodynamics and coherent structures of a flatback airfoil in these conditions. Two angles of attack - one inside $\left(12^{\circ}\right)$ and one outside $\left(0^{\circ}\right)$ of the low-drag pocket - are examined more thoroughly. The spanwise correlation length of secondary instability is analyzed in terms of autocorrelation of the $Γ_{1}$ vortex identification criterion, while coherent structures were extracted via the multiscale Proper Orthogonal Decomposition (mPOD). The results show increased base pressure, BL thickness, vortex formation length, and more organized wake structures inside the low-drag regime. While the primary instability (Bénard-von Kármán vortex street) dominates in both cases, the secondary instability is distinguishable only for the $12^{\circ}$ case and is identified as a Mode S$^{\prime}$ instability. △ Less

Submitted 14 October, 2024; originally announced October 2024.

Comments: 27 pages, 25 figures, submitted to Physical Review Fluids

Experimental Characterization of Non-Isothermal Sloshing in Microgravity

Authors: Francisco Monteiro, Pedro Marques, Alessia Simonini, Louis Carbonnelle, Miguel Alfonso Mendez

Abstract: Sloshing of cryogenic liquid propellants can significantly impact a spacecraft's mission safety and performance by unpredictably altering the center of mass and producing large pressure fluctuations due to the increased heat and mass transfer within the tanks. This study, conducted as part of the NT-SPARGE (Non-isoThermal Sloshing PARabolic FliGht Experiment) project, provides a detailed experimen… ▽ More Sloshing of cryogenic liquid propellants can significantly impact a spacecraft's mission safety and performance by unpredictably altering the center of mass and producing large pressure fluctuations due to the increased heat and mass transfer within the tanks. This study, conducted as part of the NT-SPARGE (Non-isoThermal Sloshing PARabolic FliGht Experiment) project, provides a detailed experimental investigation of the thermodynamic evolution of a partially filled upright cylindrical tank undergoing non-isothermal sloshing in microgravity. Sloshing was induced by a step reduction in gravity during the 83rd European Space Agency (ESA) parabolic flight, resulting in a chaotic reorientation of the free surface under inertia-dominated conditions. To investigate the impact of heat and mass transfer on the sloshing dynamics, two identical test cells operating with a representative fluid, HFE-7000, in single-species were considered simultaneously. One cell was maintained in isothermal conditions, while the other started with initially thermally stratified conditions. Flow visualization, pressure, and temperature measurements were acquired for both cells. The results highlight the impact of thermal mixing on liquid dynamics coupled with the significant pressure and temperature fluctuations produced by the destratification. The comprehensive experimental data gathered provide a unique opportunity to validate numerical simulations and simplified models for non-isothermal sloshing in microgravity, thus contributing to improved cryogenic fluid management technologies. △ Less

Submitted 10 October, 2024; v1 submitted 9 October, 2024; originally announced October 2024.

The Fear of Halley's Comet Visit in 1910 is Preserved in a Cave in Southern Puerto Rico

Authors: Abel Méndez, Ángel Acosta-Colón

Abstract: This paper explores a unique cave art found in southern Puerto Rico that depicts a comet over a tomb. Through interdisciplinary methods, including art interpretation, historical documentation, and demographic analysis, this study uncovered the artist's identity, the societal context of the period, and the potential motivations behind the creation of this art. The investigation revealed a connectio… ▽ More This paper explores a unique cave art found in southern Puerto Rico that depicts a comet over a tomb. Through interdisciplinary methods, including art interpretation, historical documentation, and demographic analysis, this study uncovered the artist's identity, the societal context of the period, and the potential motivations behind the creation of this art. The investigation revealed a connection to the passage of Halley's Comet in 1910 and the widespread panic it induced. △ Less

Submitted 4 October, 2024; originally announced October 2024.

Comments: 7 pages, 6 figures. Submitted to the Journal of Astronomical History and Heritage

Data-driven turbulent heat flux modeling with inputs of multiple fidelity

Authors: Matilde Fiore, Enrico Saccaggi, Lilla Koloszar, Yann Bartosiewicz, Miguel Alfonso Mendez

Abstract: Data-driven RANS modeling is emerging as a promising methodology to exploit the information provided by high-fidelity data. However, its widespread application is limited by challenges in generalization and robustness to inconsistencies between input data of varying fidelity levels. This is especially true for thermal turbulent closures, which inherently depend on momentum statistics provided by l… ▽ More Data-driven RANS modeling is emerging as a promising methodology to exploit the information provided by high-fidelity data. However, its widespread application is limited by challenges in generalization and robustness to inconsistencies between input data of varying fidelity levels. This is especially true for thermal turbulent closures, which inherently depend on momentum statistics provided by low or high fidelity turbulence momentum models. This work investigates the impact of momentum modeling inconsistencies on a data-driven thermal closure trained with a dataset with multiple fidelity (DNS and RANS). The analysis of the model inputs shows that the two fidelity levels correspond to separate regions in the input space. It is here shown that such separation can be exploited by a training with heterogeneous data, allowing the model to detect the level of fidelity in its inputs and adjust its prediction accordingly. In particular, a sensitivity analysis and verification shows that such a model can leverage the data inconsistencies to increase its robustness. Finally, the verification with a CFD simulation shows the potential of this multi-fidelity training approach for flows in which momentum statistics provided by traditional models are affected by model uncertainties. △ Less

Submitted 5 September, 2024; originally announced September 2024.

Linear stability analysis of a vertical liquid film over a moving substrate

Authors: Fabio Pino, Miguel Alfonso Mendez, Benoit Scheid

Abstract: The stability of liquid film flows are important in many industrial applications. In the dip-coating process, a liquid film is formed over a substrate extracted at a constant speed from a liquid bath. We studied the linear stability of this film considering different thicknesses $\hat{h}$ for four liquids, spanning a large range of Kapitza numbers ($\rm Ka$). By solving the Orr-Sommerfeld eigenval… ▽ More The stability of liquid film flows are important in many industrial applications. In the dip-coating process, a liquid film is formed over a substrate extracted at a constant speed from a liquid bath. We studied the linear stability of this film considering different thicknesses $\hat{h}$ for four liquids, spanning a large range of Kapitza numbers ($\rm Ka$). By solving the Orr-Sommerfeld eigenvalue problem with the Chebyshev-Tau spectral method, we calculated the neutral curves, investigated the instability mechanism and computed the absolute/convective threshold. The instability mechanism was studied through the analysis of vorticity distribution and the kinetic energy balance of the perturbations. It was found that liquids with low $\rm Ka$ (e.g. corn oil, $\text{Ka}$ = 4) have a smaller area of stability than a liquid at high $\rm Ka$ (e.g. Liquid Zinc, $\rm Ka$ = 11525). Surface tension has both a stabilizing and a destabilizing effect, especially for large $\rm Ka$. For long waves, it curves the vorticity lines near the substrate, reducing the flow under the crests. For short waves, it fosters vorticity production at the interface and creates a region of intense vorticity near the substrate. In addition, we discovered that the surface tension contributes to both the production and dissipation of perturbation's energy depending on the $\rm Ka$ number. In terms of absolute/convective threshold, we found a window of absolute instability in the $\text{Re}-\hat{h}$ space, showing that the Landau-Levich-Derjaguin solution ($\hat{h}=0.945 \text{Re}^{1/9}\text{Ka}^{-1/6}$) is always convectively unstable. Moreover, we show that for $\text{Ka}<17$, the Derjaguin's solution ($\hat{h}=1$) is always convectively unstable. △ Less

Submitted 13 August, 2024; originally announced August 2024.

Journal ref: J. Fluid Mech. 1000 (2024) A57

On the unsteady aerodynamics of flapping wings under dynamic hovering kinematics

Authors: Romain Poletti, Andre Calado, Lilla K. Koloszar, Joris Degroote, Miguel A. Mendez

Abstract: Hummingbirds and insects achieve outstanding flight performance by adapting their flapping motion to the flight requirements. Their wing kinematics can change from smooth flapping to highly dynamic waveforms, generating unsteady aerodynamic phenomena such as leading-edge vortices (LEV), rotational circulation, wing wake capture, and added mass. This article uncovers the interactions of these mecha… ▽ More Hummingbirds and insects achieve outstanding flight performance by adapting their flapping motion to the flight requirements. Their wing kinematics can change from smooth flapping to highly dynamic waveforms, generating unsteady aerodynamic phenomena such as leading-edge vortices (LEV), rotational circulation, wing wake capture, and added mass. This article uncovers the interactions of these mechanisms in the case of a rigid semi-elliptical wing undergoing aggressive kinematics in the hovering regime at $Re\sim \mathcal{O}(10^3)$. The flapping kinematics were parametrized using smoothed steps and triangular functions and the flow dynamics were simulated by combining the overset method with Large Eddy Simulations (LES). The analysis of the results identifies an initial acceleration phase and a cruising phase. During the former, the flow is mostly irrotational and governed by the added mass effect. The added mass was shown to be responsible for a lift first peak due to the strong flapping acceleration. The dynamic pitching and the wing wake interaction generate a second lift peak due to a downwash flow and a vortex system on the proximal and distal parts of the wing's pressure side. Conversely, aerodynamic forces in the cruising phase are mainly governed by the growth and the establishment of the LEV. Finally, the leading flow structures in each phase and their impact on the aerodynamic forces were isolated using the extended Proper Orthogonal Decomposition (POD). △ Less

Submitted 6 August, 2024; originally announced August 2024.

Journal ref: Physics of Fluids 2024 (Vol.36, Issue 8)

A meshless method to compute the proper orthogonal decomposition and its variants from scattered data

Authors: Iacopo Tirelli, Miguel Alfonso Mendez, Andrea Ianiro, Stefano Discetti

Abstract: Complex phenomena can be better understood when broken down into a limited number of simpler "components". Linear statistical methods such as the principal component analysis and its variants are widely used across various fields of applied science to identify and rank these components based on the variance they represent in the data. These methods can be seen as factorisations of the matrix colle… ▽ More Complex phenomena can be better understood when broken down into a limited number of simpler "components". Linear statistical methods such as the principal component analysis and its variants are widely used across various fields of applied science to identify and rank these components based on the variance they represent in the data. These methods can be seen as factorisations of the matrix collecting all the data, assuming it consists of time series sampled from fixed points in space. However, when data sampling locations vary over time, as with mobile monitoring stations in meteorology and oceanography or with particle tracking velocimetry in experimental fluid dynamics, advanced interpolation techniques are required to project the data onto a fixed grid before the factorisation. This interpolation is often expensive and inaccurate. This work proposes a method to decompose scattered data without interpolating. The approach employs physics-constrained radial basis function regression to compute inner products in space and time. The method provides an analytical and mesh-independent decomposition in space and time, demonstrating higher accuracy. Our approach allows distilling the most relevant "components" even for measurements whose natural output is a distribution of data scattered in space and time, maintaining high accuracy and mesh independence. △ Less

Submitted 10 January, 2025; v1 submitted 3 July, 2024; originally announced July 2024.

Multi-objective optimization of the magnetic wiping process in dip-coating

Authors: Fabio Pino, Benoit Scheid, Miguel Alfonso Mendez

Abstract: Electromagnetic wiping systems allow to pre-meter the coating thickness of the liquid metal on a moving substrate. These systems have the potential to provide a more uniform coating and significantly higher production rates compared to pneumatic wiping, but they require substantially larger amounts of energy. This work presents a multi-objective optimization accounting for (1) maximal wiping effic… ▽ More Electromagnetic wiping systems allow to pre-meter the coating thickness of the liquid metal on a moving substrate. These systems have the potential to provide a more uniform coating and significantly higher production rates compared to pneumatic wiping, but they require substantially larger amounts of energy. This work presents a multi-objective optimization accounting for (1) maximal wiping efficiency (2) maximal smoothness of the wiping meniscus, and (3) minimal Joule heating. We present the Pareto front, identifying the best wiping conditions given a set of weights for the three competing objectives. The optimization was based on a 1D steady-state integral model, whose prediction scales according to the Hartmann number (Ha). The optimization uses a multi-gradient approach, with gradients computed with a combination of finite differences and variational methods. The results show that the wiping efficiency depends solely on Ha and not the magnetic field distribution. Moreover, we show that the liquid thickness becomes insensitive to the intensity of the magnetic field above a certain threshold and that the current distribution (hence the Joule heating) is mildly affected by the magnetic field's intensity and shape. △ Less

Submitted 20 June, 2024; originally announced June 2024.

A meshless and binless approach to compute statistics in 3D Ensemble PTV

Authors: Manuel Ratz, Miguel A. Mendez

Abstract: We propose a method to obtain superresolution of turbulent statistics for three-dimensional ensemble particle tracking velocimetry (EPTV). The method is ''meshless'' because it does not require the definition of a grid for computing derivatives, and it is ''binless'' because it does not require the definition of bins to compute local statistics. The method combines the constrained radial basis fun… ▽ More We propose a method to obtain superresolution of turbulent statistics for three-dimensional ensemble particle tracking velocimetry (EPTV). The method is ''meshless'' because it does not require the definition of a grid for computing derivatives, and it is ''binless'' because it does not require the definition of bins to compute local statistics. The method combines the constrained radial basis function (RBF) formalism introduced Sperotto et al. (Meas Sci Technol, 33:094005, 2022) with a kernel estimate approach for the ensemble averaging of the RBF regressions. The computational cost for the RBF regression is alleviated using the partition of unity method (PUM). Three test cases are considered: (1) a 1D illustrative problem on a Gaussian process, (2) a 3D synthetic test case reproducing a 3D jet-like flow, and (3) an experimental dataset collected for an underwater jet flow at $\text{Re} = 6750$ using a four-camera 3D PTV system. For each test case, the method performances are compared to traditional binning approaches such as Gaussian weighting (Agüí and Jiménez, JFM, 185:447-468, 1987), local polynomial fitting (Agüera et al, Meas Sci Technol, 27:124011, 2016), as well as a binned version of the RBF statistics. △ Less

Submitted 7 February, 2025; v1 submitted 18 March, 2024; originally announced March 2024.

Comments: 21 pages, 13 figures, submitted to: Experiments in Fluids

The IAEA electronic stopping power database: modernization, review, and analysis of the existing experimental data

Authors: C. C. Montanari, P. Dimitriou, L. Marian, A. M. P. Mendez, J. P. Peralta, F. Bivort-Haiek

Abstract: We review the electronic stopping power data within the IAEA database, assessing the abundance and scarcity of available data as a function of energy and collisional systems. Our analysis includes an examination of the experimental values, their evolution in time, the dispersion among data, and trends of the more recent measurements. Additionally, we provide comparisons with SRIM-2013 calculations… ▽ More We review the electronic stopping power data within the IAEA database, assessing the abundance and scarcity of available data as a function of energy and collisional systems. Our analysis includes an examination of the experimental values, their evolution in time, the dispersion among data, and trends of the more recent measurements. Additionally, we provide comparisons with SRIM-2013 calculations for select cases of interest. Notably, we identify sparsely measured systems and energy regions, emphasizing the pressing need for new, reliable data and independent theoretical predictions. △ Less

Submitted 19 March, 2024; v1 submitted 5 February, 2024; originally announced February 2024.

Relativistic effects on stopping power of plasmas with heavy ions

Authors: A. M. P. Mendez, J. Chacón-Gijón, J. Vázquez-Moyano, M. D. Barriga-Carrasco

Abstract: This work investigates the electronic stopping power for protons of a tungsten plasma at various electron densities and temperatures. The study employs a dielectric formalism to model the stopping power due to free and bound electrons, considering relativistic and non-relativistic effects. The bound electron stopping power is modeled using the shellwise local plasma approximation (SLPA) introduced… ▽ More This work investigates the electronic stopping power for protons of a tungsten plasma at various electron densities and temperatures. The study employs a dielectric formalism to model the stopping power due to free and bound electrons, considering relativistic and non-relativistic effects. The bound electron stopping power is modeled using the shellwise local plasma approximation (SLPA) introduced by Montanari and Miraglia. The ionization state of the plasma is also examined, revealing its impact on the bound electron contribution. We compare our results with the T-Matrix approach and the Li-Petrasso model for free electrons in combination with SLPA calculations for the bound electron ones. Results demonstrate the significance of bound electron stopping power, particularly for plasma with high-Z ions. This investigation contributes valuable insights into plasma physics and fusion energy research, providing essential data for future experiments and simulations. △ Less

Submitted 29 January, 2024; originally announced January 2024.

An extension of the compound flow theory with friction between the streams and at the wall

Authors: Jan Van den Berghe, Miguel Alfonso Mendez, Yann Bartosiewicz

Abstract: Compound flows consist of two or more parallel compressible streams in a duct and their theoretical treatment has gained attention for the analysis and modelling of ejectors. Recent works have shown that these flows can experience choking upstream of the geometric throat. While it is well known that friction can push the sonic section downstream the throat, no mechanism has been identified yet to… ▽ More Compound flows consist of two or more parallel compressible streams in a duct and their theoretical treatment has gained attention for the analysis and modelling of ejectors. Recent works have shown that these flows can experience choking upstream of the geometric throat. While it is well known that friction can push the sonic section downstream the throat, no mechanism has been identified yet to explain its displacement in the opposite direction. This study extends the existing compound flow theory and proposes a 1D model, including friction between the streams and the duct walls. The model captures the upstream and downstream displacements of the sonic section. Through an analytical investigation of the singularity at the sonic section, it is demonstrated that friction between the streams is the primary driver of upstream displacement. The 1D formulation is validated against axisymmetric Reynolds Averaged Navier-Stokes (RANS) simulations of a compound nozzle for various inlet pressure and geometries. The effect of friction is investigated using an inviscid simulation for the isentropic case and viscous simulations with both slip and no-slip conditions at the wall. The proposed extension accurately captures the displacement of the sonic section, offering a new tool for in-depth analysis and modeling of internal compound flows. △ Less

Submitted 30 October, 2024; v1 submitted 14 January, 2024; originally announced January 2024.

Comments: 36 pages, 13 figures, in submission to Journal of Fluid Mechanics

Journal ref: J. Fluid Mech. 1000 (2024) A85

Absolute and convective instabilities in a liquid film over a substrate moving against gravity

Authors: Fabio Pino, Miguel Alfonso Mendez, Benoit Scheid

Abstract: The drag-out problem for small Reynolds numbers ($\rm Re$) admits the Landau-Levich-Derjaguin (LLD) solution for small capillary numbers ($\rm Ca$), and Derjaguin's solution for large $\rm Ca$. We investigate whether these solutions are absolutely or convectively unstable, solving the Orr-Sommerfeld eigenvalue problem. For Derjaguin's solution, we show that the LLD solution is convectively unstabl… ▽ More The drag-out problem for small Reynolds numbers ($\rm Re$) admits the Landau-Levich-Derjaguin (LLD) solution for small capillary numbers ($\rm Ca$), and Derjaguin's solution for large $\rm Ca$. We investigate whether these solutions are absolutely or convectively unstable, solving the Orr-Sommerfeld eigenvalue problem. For Derjaguin's solution, we show that the LLD solution is convectively unstable for $\text{Ka}<17$ and absolutely unstable for $\text{Ka} \gtrsim 0.15 \,\text{Re}^{1.7}$ for $\text{Re} > 10$. For water ($\text{Ka}=3400$), the LLD solution is always convectively unstable. The absolute instability is observed only when the dip-coated film is additionally fed from above. △ Less

Submitted 13 August, 2024; v1 submitted 22 December, 2023; originally announced December 2023.

Characterization of a capillary driven flow in microgravity by means of optical technique

Authors: Domenico Fiorini, Louis Carbonnelle, Alessia Simonini, Johan Steelant, David Seveno, Miguel A. Mendez

Abstract: The motion of a gas-liquid interface along a solid wall is influenced by the capillary forces resulting from the interface's shape and its interaction with the solid, where it forms a dynamic contact angle. Capillary models play a significant role in the management of cryogenic propellants in space, where surface tension dominates the behaviour of gas-liquid interfaces. Yet, most empirical models… ▽ More The motion of a gas-liquid interface along a solid wall is influenced by the capillary forces resulting from the interface's shape and its interaction with the solid, where it forms a dynamic contact angle. Capillary models play a significant role in the management of cryogenic propellants in space, where surface tension dominates the behaviour of gas-liquid interfaces. Yet, most empirical models have been derived in configurations dominated by viscous forces. In this study, we experimentally investigate the wetting of a low-viscosity, highly wetting fluid in a reduced gravity environment. Our setup consisted of a transparent and diverging U-tube in which capillary forces sustain the liquid motion. Combining Particle Image Velocimetry (PIV) and high-speed backlighting visualization, the experimental campaign allowed for measuring the interface evolution and the velocity field within the liquid under varying gravity levels. This work reports on the preliminary results from the image velocimetry and shows that the velocity profile within the tube is close to parabolic until a short distance from the interface. Nevertheless, classic 1D models for capillary rise face difficulties reproducing the interface dynamics, suggesting that the treatment of the surface tension in these problems must be reviewed. △ Less

Submitted 6 December, 2023; originally announced December 2023.

Journal ref: Multiphase Science and Technology 35, no. 3 (2023)

Capillary driven flows in microgravity

Authors: Domenico Fiorini, Alessia Simonini, Johan Steelant, David Seveno, Miguel A. Mendez

Abstract: This work investigates the capillary rise dynamics of highly wetting liquids in a divergent U-tube in the microgravity conditions provided by 78th European Space Agency (ESA) parabolic flight. This configuration produces a capillary-driven channel flow. We use image recording in backlight illumination to characterize the interface dynamics and dynamic contact angle of HFE7200 and Di-Propylene Glyc… ▽ More This work investigates the capillary rise dynamics of highly wetting liquids in a divergent U-tube in the microgravity conditions provided by 78th European Space Agency (ESA) parabolic flight. This configuration produces a capillary-driven channel flow. We use image recording in backlight illumination to characterize the interface dynamics and dynamic contact angle of HFE7200 and Di-Propylene Glycol (DPG). For the case of HF7200, we complement the interface measurements with Particle Tracking Velocimetry (PTV) to characterize the velocity fields underneath the moving meniscus. In the experiments with DPG, the liquid column reaches different heights within various experiments, and the measurements show a sharp reduction of the meniscus curvature when the contact line moves from a pre-wet to a dry substrate. In experiments with HFE7200, the interface always moves on a pre-wet surface. Yet a curvature reduction is observed due to the inertial forces on the underlying accelerating flow. The PTV measurements show that the distance from the interface within which the velocity profile adapts to the meniscus velocity shortens as the interface acceleration increases. △ Less

Submitted 25 April, 2024; v1 submitted 5 December, 2023; originally announced December 2023.

Optimal photometry of point sources: Joint source flux and background determination on array detectors -- from theory to practical implementation

Authors: Mario L. Vicuña, Jorge F. Silva, Rene A. Mendez, Marcos E. Orchard, Sebastian Espinosa, Jeremy Tregloan-Reed

Abstract: In this paper we study the joint determination of source and background flux for point sources as observed by digital array detectors. We explicitly compute the two-dimensional Cramér-Rao absolute lower bound (CRLB) as well as the performance bounds for high-dimensional implicit estimators from a generalized Taylor expansion. This later approach allows us to obtain computable prescriptions for the… ▽ More In this paper we study the joint determination of source and background flux for point sources as observed by digital array detectors. We explicitly compute the two-dimensional Cramér-Rao absolute lower bound (CRLB) as well as the performance bounds for high-dimensional implicit estimators from a generalized Taylor expansion. This later approach allows us to obtain computable prescriptions for the bias and variance of the joint estimators. We compare these prescriptions with empirical results from numerical simulations in the case of the weighted least squares estimator (introducing an improved version, denoted stochastic weighted least-squares) as well as with the maximum likelihood estimator, finding excellent agreement. We demonstrate that these estimators provide quasi-unbiased joint estimations of the flux and background, with a variance that approaches the CRLB very tightly and are, hence, optimal, unlike the case of sequential estimation used commonly in astronomical photometry which is sub-optimal. We compare our predictions with numerical simulations of realistic observations, as well as with observations of a bona-fide non-variable stellar source observed with TESS, and compare it to the results from the sequential estimation of background and flux, confirming our theoretical expectations. Our practical estimators can be used as benchmarks for general photometric pipelines, or for applications that require maximum precision and accuracy in absolute photometry. △ Less

Submitted 20 November, 2023; originally announced November 2023.

Comments: Accepted by PASP. 35 pages, 12 figures, 5 appendices

Real-time data assimilation for the thermodynamic modeling of cryogenic storage tanks

Authors: Pedro Afonso Marques, Samuel Ahizi, Miguel Alfonso Mendez

Abstract: The thermal management of cryogenic storage tanks requires advanced control strategies to minimize the boil-off losses produced by heat leakages and sloshing-enhanced heat and mass transfer. This work presents a data-assimilation approach to calibrate a 0D thermodynamic model for cryogenic fuel tanks from data collected in real time from multiple tanks. The model combines energy and mass balance b… ▽ More The thermal management of cryogenic storage tanks requires advanced control strategies to minimize the boil-off losses produced by heat leakages and sloshing-enhanced heat and mass transfer. This work presents a data-assimilation approach to calibrate a 0D thermodynamic model for cryogenic fuel tanks from data collected in real time from multiple tanks. The model combines energy and mass balance between three control volumes (the ullage vapor, the liquid, and the solid tank) with an Artificial Neural Network (ANN) for predicting the heat transfer coefficients from the current tank state. The proposed approach combines ideas from traditional data assimilation and multi-environment reinforcement learning, where an agent's training (model assimilation) is carried out simultaneously on multiple environments (systems). The real-time assimilation uses a mini-batch version of the Limited-memory Broyden-Fletcher-Goldfarb-Shanno with bounds (L-BFGS-B) and adjoint-based gradient computation for solving the underlying optimization problem. The approach is tested on synthetic datasets simulating multiple tanks undergoing different operation phases (pressurization, hold, long-term storage, and sloshing). The results show that the assimilation is robust against measurement noise and uses it to explore the parameter space further. Moreover, we show that sampling from multiple environments simultaneously accelerates the assimilation. △ Less

Submitted 20 October, 2023; v1 submitted 17 October, 2023; originally announced October 2023.

Comments: 21 pages, 18 figures, preprint submitted to Energy

Dynamic wetting experiment with nitrogen in a quasi-capillary tube

Authors: Domenico Fiorini, Alessia Simonini, Johan Steelant, David Seveno, Miguel Alfonso Mendez

Abstract: This work investigates the wetting dynamics of cryogenic fluids in inertia-dominated conditions. We experimentally characterized an oscillating gas-liquid interface of liquid nitrogen in a partially filled U-shaped quartz tube. The experiments were carried out in controlled cryogenic conditions, with interface oscillations produced by releasing the liquid column from an unbalanced position and hav… ▽ More This work investigates the wetting dynamics of cryogenic fluids in inertia-dominated conditions. We experimentally characterized an oscillating gas-liquid interface of liquid nitrogen in a partially filled U-shaped quartz tube. The experiments were carried out in controlled cryogenic conditions, with interface oscillations produced by releasing the liquid column from an unbalanced position and having nitrogen vapor as the only ullage gas. During the experiments, the interface shape was tracked via image processing and used to fit a model from which the contact angle could be accurately determined. The results show that the dynamic contact angle evolution in advancing conditions is linearly linked to the Capillary number, with a slope depending on whether the interface moves over a dry or a pre-wet surface. However, the contact angle remains close to the one at equilibrium in receding conditions. To analyze the relation between contact angle and interface dynamics, we define an equivalent contact angle as the one that would make a spherical interface produce the same capillary pressure drop as the actual interface shape. The evolution of this equivalent contact angle proved to be independent of the evolution of the actual one, suggesting that the interface shape is not influenced by it. Finally, a theoretical analysis of the interface motion using a simplified model shows that viscous forces dominate the damping of the interface for small tube sizes, while gravity and inertial forces dominate the oscillating dynamics of the liquid column for larger tubes. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Comments: 13 pages, 26 pdf figure files grouped in 8 figures

On the coupling instability of a gas jet impinging on a liquid film

Authors: David Barreiro-Villaverde, Anne Gosset, Marcos Lema, Miguel A. Mendez

Abstract: We investigate the dynamics of a gas jet impinging on a thin liquid film. This configuration is relevant to the jet-wiping process and is unstable. In particular, we complement previous works that focused on the wiping of liquids with low Kapitza numbers (highly viscous liquids) by numerically analyzing the wiping of liquids with much higher Kapitza numbers, more relevant to industrial processes.… ▽ More We investigate the dynamics of a gas jet impinging on a thin liquid film. This configuration is relevant to the jet-wiping process and is unstable. In particular, we complement previous works that focused on the wiping of liquids with low Kapitza numbers (highly viscous liquids) by numerically analyzing the wiping of liquids with much higher Kapitza numbers, more relevant to industrial processes. The simulations are carried out by combining Volume of Fluid (VOF) and Large Eddy Simulation (LES), and the dynamics of the gas-liquid interaction is analyzed using extended multiscale Proper Orthogonal Decomposition (emPOD). The resolution and flow details captured by the simulations are unprecedented. The results show that, despite the vastly different wiping conditions, the dynamics of the gas-liquid interaction is remarkably similar. This opens new avenues to the study and the scaling of the jet-wiping process. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Journal ref: J. Fluid Mech. 992 (2024) A11

Mass ratio of single-line spectroscopic binaries with visual orbits using Bayesian inference and suitable priors

Authors: Jennifer Anguita-Aguero, Rene A. Mendez, Miguel Videla, Edgardo Costa, Leonardo Vanzi, Nicolas Castro-Morales, Camila Caballero-Valdes

Abstract: We present orbital elements for twenty-two single-line binaries, nine of them studied for the first time, determined from a joint spectroscopic and astrometric solution. The astrometry is based on interferometric measurements obtained with the HRCam Speckle camera on the SOAR 4.1m telescope at Cerro Pachon, Chile, supplemented with historical data. The spectroscopic observations were secured using… ▽ More We present orbital elements for twenty-two single-line binaries, nine of them studied for the first time, determined from a joint spectroscopic and astrometric solution. The astrometry is based on interferometric measurements obtained with the HRCam Speckle camera on the SOAR 4.1m telescope at Cerro Pachon, Chile, supplemented with historical data. The spectroscopic observations were secured using Echelle spectrographs (FEROS, FIDEOS and HARPS) at La Silla, Chile. A comparison of our orbital elements and systemic velocities with previous studies, including Gaia radial velocities, show the robustness of our estimations. By adopting suitable priors of the trigonometric parallax and spectral type of the primary component, and using a Bayesian inference methodology developed by our group, we were able to estimate mass ratios for these binaries. Combining the present results with a previous study of other single-line from our team we present a pseudo mass-to-luminosity relationship based on twenty three systems (45 stars) in the mass range 0.6 <= M_Sun <= 2.5. We find a reasonable correspondence with a fiducial mass-to-luminosity relationship. We conclude that our methodology does allow to derive tentative mass ratios for this type of binaries. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Comments: 27 pages, 11 figures, 5 tables. Accepted by The Astronomical Journal

Damping of three-dimensional waves on coating films dragged by moving substrates

Authors: David Barreiro-Villaverde, Anne Gosset, Marcos Lema, Miguel Alfonso Mendez

Abstract: Paints and coatings often feature interfacial defects due to disturbances during the deposition process which, if they persist until solidification, worsen the product quality. In this article, we investigate the stability of a thin liquid film dragged by a vertical substrate moving against gravity, a flow configuration found in a variety of coating processes. The receptivity of the liquid film to… ▽ More Paints and coatings often feature interfacial defects due to disturbances during the deposition process which, if they persist until solidification, worsen the product quality. In this article, we investigate the stability of a thin liquid film dragged by a vertical substrate moving against gravity, a flow configuration found in a variety of coating processes. The receptivity of the liquid film to three-dimensional disturbances is discussed with Direct Numerical Simulations (DNS), an in-house non-linear Integral Boundary Layer (IBL) film model, and Linear Stability Analysis (LSA). The thin film model, successfully validated with the DNS computations, implements a pseudo-spectral approach for the capillary terms that allows for investigating non-periodic surface tension dominated flows. The combination of these numerical tools allows for describing the mechanisms of capillary and non-linear damping, and identifying the instability threshold of the coating processes. The results show that transverse modulations can be beneficial for the damping of two-dimensional waves within the range of operational conditions considered in this study, typical of air-knife and slot-die coating. △ Less

Submitted 29 June, 2023; v1 submitted 25 May, 2023; originally announced May 2023.

A-BASE-DE-PROS: una implementación práctica de los Objetivos de Desarrollo Sostenible en la Universidad Politécnica de Madrid

Authors: Patricia Almendros, Silvia Otegui, Alejandro Nares, Laura del Fresno, Javier Ablanque, Irene Blanco, Juan Ramón Ferrer, Sonia Benito, Carmen Lopez, Sonia García, León Fernández, Sergio Zubelzu, Raúl Sánchez, Paloma Esteve, Rosa María Benito, Juan Carlos Losada, Antonio Saa, Gabriel Gascó, Ana M. Méndez, Mónica Montoya, Marina de Francisco, Jesús Ruiz, Samuel Seoanez, Sara Castilla, Dámaris Fuente , et al. (24 additional authors not shown)

Abstract: The influence of the Sustainable Development Goals (SDGs) has been widely spread over the last years, establishing new public and privat policies. Education has also been experiencing this change by aligning with the previous goals. In this chapter, we briefly summarize the main activities conducted under the Grant APS22.2003 'Service-based learning of the SDGs related to a responsible production… ▽ More The influence of the Sustainable Development Goals (SDGs) has been widely spread over the last years, establishing new public and privat policies. Education has also been experiencing this change by aligning with the previous goals. In this chapter, we briefly summarize the main activities conducted under the Grant APS22.2003 'Service-based learning of the SDGs related to a responsible production and consumption (A-BASE-DE-PROS)', which uses the SDG 12 as a guide line to raise the awareness of the importance of the 2030 Agenda among undergraduate and secondary-school students. In general, the service-based learning has increased the knowledge of the SDGs among the students. Furthermore, most of the (university and secondary) students found the service-learning △ Less

Submitted 27 February, 2023; originally announced February 2023.

Comments: 8 pages, in Spanish language, 8 figures

Optimal observational scheduling framework for binary and multiple stellar systems

Authors: Miguel Videla, Rene A. Mendez, Jorge F. Silva, Marcos E. Orchard

Abstract: The optimal instant of observation of astrophysical phenomena for objects that vary on human time-sales is an important problem, as it bears on the cost-effective use of usually scarce observational facilities. In this paper we address this problem for the case of tight visual binary systems through a Bayesian framework based on the maximum entropy sampling principle. Our proposed information-driv… ▽ More The optimal instant of observation of astrophysical phenomena for objects that vary on human time-sales is an important problem, as it bears on the cost-effective use of usually scarce observational facilities. In this paper we address this problem for the case of tight visual binary systems through a Bayesian framework based on the maximum entropy sampling principle. Our proposed information-driven methodology exploits the periodic structure of binary systems to provide a computationally efficient estimation of the probability distribution of the optimal observation time. We show the optimality of the proposed sampling methodology in the Bayes sense and its effectiveness through direct numerical experiments. We successfully apply our scheme to the study of two visual-spectroscopic binaries, and one purely astrometric triple hierarchical system. We note that our methodology can be applied to any time-evolving phenomena, a particularly interesting application in the era of dedicated surveys, where a definition of the cadence of observations can have a crucial impact on achieving the science goals. △ Less

Submitted 10 January, 2023; originally announced January 2023.

Comments: Accepted for publication to PASP. 23 pages, 2 Tables, 9 Figures, 2 Appendices

Experimental analysis of heat and mass transfer in non-isothermal sloshing using a model-based inverse method

Authors: Pedro Marques, Alessia Simonini, Laura Peveroni, Miguel Alfonso Mendez

Abstract: Nonisothermal liquid sloshing in partially filled reservoirs can significantly enhance heat and mass transfer between liquid and ullage gasses. This can result in large temperature and pressure fluctuations, producing thrust oscillations in spacecraft and challenging thermal management control systems. This work presents an experimental characterization of the thermodynamic evolution of a cylindri… ▽ More Nonisothermal liquid sloshing in partially filled reservoirs can significantly enhance heat and mass transfer between liquid and ullage gasses. This can result in large temperature and pressure fluctuations, producing thrust oscillations in spacecraft and challenging thermal management control systems. This work presents an experimental characterization of the thermodynamic evolution of a cylindrical reservoir undergoing sloshing-induced thermal de-stratification. We use a 0D model-based inverse method to retrieve the heat and mass transfer coefficients in planar and swirl sloshing conditions from the temperature and pressure measurements in the liquid and the ullage gas. The experiments were carried out in the SHAKESPEARE shaking table of the von Karman Institute in a cuboid quartz cell with a cylindrical cut-out of 80 mm diameter in the centre, filled up to 60mm with the cryogenic replacement fluid HFE-7200. A thermal stratification with 25 K difference between the ullage gas and liquid was set as the initial conditions. A pressure drop of 90% in the ullage gas was documented in swirling conditions. Despite its simplicity, the model could predict the system's thermodynamic evolution once the proper transfer coefficients were derived. △ Less

Submitted 23 December, 2022; originally announced December 2022.

Comments: 18 pages, 14 figures, 4 tables

A Robust Data-Driven Model for Flapping Aerodynamics under different hovering kinematics

Authors: Andre Calado, Romain Poletti, Lilla K. Koloszar, Miguel A. Mendez

Abstract: Flapping Wing Micro Air Vehicles (FWMAV) are highly manoeuvrable, bio-inspired drones that can assist in surveys and rescue missions. Flapping wings generate various unsteady lift enhancement mechanisms challenging the derivation of reduced models to predict instantaneous aerodynamic performance. In this work, we propose a robust CFD data-driven, quasi-steady (QS) Reduced Order Model (ROM) to pred… ▽ More Flapping Wing Micro Air Vehicles (FWMAV) are highly manoeuvrable, bio-inspired drones that can assist in surveys and rescue missions. Flapping wings generate various unsteady lift enhancement mechanisms challenging the derivation of reduced models to predict instantaneous aerodynamic performance. In this work, we propose a robust CFD data-driven, quasi-steady (QS) Reduced Order Model (ROM) to predict the lift and drag coefficients within a flapping cycle. The model is derived for a rigid ellipsoid wing with different parameterized kinematics in hovering conditions. The proposed ROM is built via a two-stage regression. The first stage, defined as `in-cycle' (IC), computes the parameters of a regression linking the aerodynamic coefficients to the instantaneous wing state. The second stage, `out-of-cycle' (OOC), links the IC weights to the flapping features that define the flapping motion. The training and test dataset were generated via high-fidelity simulations using the overset method, spanning a wide range of Reynolds numbers and flapping kinematics. The two-stage regressor combines Ridge regression and Gaussian Process (GP) regression to provide estimates of the model uncertainties. The proposed ROM shows accurate aerodynamic predictions for widely varying kinematics. The model performs best for smooth kinematics that generate a stable Leading Edge Vortex (LEV). Remarkably accurate predictions are also observed in dynamic scenarios where the LEV is partially shed, the non-circulatory forces are considerable, and the wing encounters its own wake. △ Less

Submitted 19 December, 2022; originally announced December 2022.

Comments: submitted to Physics of Fluids

ESPNN: A novel electronic stopping power neural-network code built on the IAEA stopping power database. I. Atomic targets

Authors: F. Bivort Haiek, A. M. P. Mendez, C. C. Montanari, D. M. Mitnik

Abstract: The International Atomic Energy Agency (IAEA) stopping power database is a highly valued public resource compiling most of the experimental measurements published over nearly a century. The database-accessible to the global scientific community-is continuously updated and has been extensively employed in theoretical and experimental research for more than 30 years. This work aims to employ machine… ▽ More The International Atomic Energy Agency (IAEA) stopping power database is a highly valued public resource compiling most of the experimental measurements published over nearly a century. The database-accessible to the global scientific community-is continuously updated and has been extensively employed in theoretical and experimental research for more than 30 years. This work aims to employ machine learning algorithms on the 2021 IAEA database to predict accurate electronic stopping power cross sections for any ion and target combination in a wide range of incident energies. Unsupervised machine learning methods are applied to clean the database in an automated manner. These techniques purge the data by removing suspicious outliers and old isolated values. A large portion of the remaining data is used to train a deep neural network, while the rest is set aside, constituting the test set. The present work considers collisional systems only with atomic targets. The first version of the ESPNN (electronic stopping power neural-network code), openly available to users, is shown to yield predicted values in excellent agreement with the experimental results of the test set. △ Less

Submitted 14 December, 2022; v1 submitted 19 October, 2022; originally announced October 2022.

Report number: JAP22-AR-05596

Linear and Nonlinear Dimensionality Reduction from Fluid Mechanics to Machine Learning

Authors: Miguel A. Mendez

Abstract: Dimensionality reduction is the essence of many data processing problems, including filtering, data compression, reduced-order modeling and pattern analysis. While traditionally tackled using linear tools in the fluid dynamics community, nonlinear tools from machine learning are becoming increasingly popular. This article, halfway between a review and a tutorial, introduces a general framework for… ▽ More Dimensionality reduction is the essence of many data processing problems, including filtering, data compression, reduced-order modeling and pattern analysis. While traditionally tackled using linear tools in the fluid dynamics community, nonlinear tools from machine learning are becoming increasingly popular. This article, halfway between a review and a tutorial, introduces a general framework for linear and nonlinear dimensionality reduction techniques. Differences and links between autoencoders and manifold learning methods are highlighted, and popular nonlinear techniques such as kernel Principal Component Analysis (kPCA), isometric feature learning (ISOMAPs) and Locally Linear Embedding (LLE) are placed in this framework. These algorithms are benchmarked in three classic problems: 1) filtering, 2) identification of oscillatory patterns, and 3) data compression. Their performances are compared against the traditional Proper Orthogonal Decomposition (POD) to provide a perspective on their diffusion in fluid dynamics. △ Less

Submitted 15 December, 2022; v1 submitted 16 August, 2022; originally announced August 2022.

Comments: submitted to Measurement Science and Technology

A 1D Model for the Unsteady Gas Dynamics of Ejectors

Authors: Jan Van den Berghe, Bruno R. B. Dias, Yann Bartosiewicz, Miguel A. Mendez

Abstract: We propose a 1D unsteady model for supersonic single-phase ejectors. The model treats an ejector as a pipe network with two inputs and one output and combines a 1D gas dynamics formulation in each `pipe' with a junction model for entrainment and mixing. The model is calibrated and validated on experimental data in steady-state conditions and used to analyze the choking mechanism for the mixed flow… ▽ More We propose a 1D unsteady model for supersonic single-phase ejectors. The model treats an ejector as a pipe network with two inputs and one output and combines a 1D gas dynamics formulation in each `pipe' with a junction model for entrainment and mixing. The model is calibrated and validated on experimental data in steady-state conditions and used to analyze the choking mechanism for the mixed flow. The model was then benchmarked against 2D URANS simulations to predict the ejector response to a sudden change in operating conditions, producing traveling waves. The results show that the model can correctly predict the ejector performance and the stream-wise evolution of relevant integral quantities (e.g. mass flow rates and momentum) in both steady and transient conditions. △ Less

Submitted 16 August, 2022; originally announced August 2022.

Comments: 14 pages, 9 figures, submitted to Energy

Data-driven modeling of hypersonic reentry flow with heat and mass transfer

Authors: Leonidas Gkimisis, Bruno Ricardo Barros Dias, James B. Scoggins, Thierry Magin, Miguel Alfonso Mendez, Alessandro Turchi

Abstract: The entry phase constitutes a design driver for aerospace systems that include such a critical step. This phase is characterized by hypersonic flows encompassing multiscale phenomena that require advanced modeling capabilities. However, since high fidelity simulations are often computationally prohibitive, simplified models are needed in multidisciplinary analyses requiring fast predictions. This… ▽ More The entry phase constitutes a design driver for aerospace systems that include such a critical step. This phase is characterized by hypersonic flows encompassing multiscale phenomena that require advanced modeling capabilities. However, since high fidelity simulations are often computationally prohibitive, simplified models are needed in multidisciplinary analyses requiring fast predictions. This work proposes data-driven surrogate models to predict the flow, and mixture properties along the stagnation streamline of hypersonic flows past spherical objects. Surrogate models are designed to predict velocity, pressure, temperature, density and air composition as a function of the object's radius, velocity, reentry altitude and surface temperature. These models are trained with data produced by numerical simulation of the quasi-one-dimensional Navier-Stokes formulation and a selected Earth atmospheric model. Physics-constrained parametric functions are constructed for each flow variable of interest, and artificial neural networks are used to map the model parameters to the model's inputs. Surrogate models were also developed to predict surface quantities of interest for the case of nonreacting or ablative carbon-based surfaces, providing alternatives to semiempirical correlations. A validation study is presented for all the developed models, and their predictive capabilities are showcased along selected reentry trajectories of space debris from low-Earth orbits. △ Less

Submitted 21 August, 2023; v1 submitted 12 August, 2022; originally announced August 2022.

Journal ref: American Institute of Aeronautics and Astronautics Journal, Volume 61, Number 8, August 2023

Effect of inertia on the dynamic contact angle in oscillating menisci

Authors: Domenico Fiorini, Miguel Alfonso Mendez, Alessia Simonini, Johan Steelant, David Seveno

Abstract: The contact angle between a gas-liquid interface and a solid surface is a function of the dynamic conditions of the contact line. Classic steady correlations link the contact angle to the contact line velocity. However, it is not clear whether they hold in presence of inertia and in the case of perfect wetting fluids. We analyze the shape of a liquid interface and the corresponding contact angle i… ▽ More The contact angle between a gas-liquid interface and a solid surface is a function of the dynamic conditions of the contact line. Classic steady correlations link the contact angle to the contact line velocity. However, it is not clear whether they hold in presence of inertia and in the case of perfect wetting fluids. We analyze the shape of a liquid interface and the corresponding contact angle in accelerating conditions for two different fluids, i.e. HFE7200 (perfect wetting) and demineralized water. The set-up consists of a U-shaped quasi-capillary tube in which the liquid column oscillates in response to a pressure step on one of the two sides. We obtained the evolution of the interface shape from high-speed back-light visualization, and we fit interface models to the experimental data to estimate the contributions of all the governing forces and the contact angle. Traditional interface models fail to predict the interface shape and its contact angle at large interface and contact line accelerations. We propose a new model to account for the acceleration, and we discuss its impact on the measurement of the transient contact angle. △ Less

Submitted 10 August, 2022; originally announced August 2022.

Control of a Wind-Turbine via Machine Learning techniques

Authors: L. Schena, E. Gillyns, W. Munters, S. Buckingham, M. A. Mendez

Abstract: This article presents two model-free controllers for wind-turbine torque and pitch control. These controllers are based on reinforcement learning (RL) and Bayesian optimization (BO) and do not rely on any mathematical model of the wind-turbine dynamics, in contrast to classical approaches designed on linearized models. The model-free controllers were benchmarked against a proportional-integral-der… ▽ More This article presents two model-free controllers for wind-turbine torque and pitch control. These controllers are based on reinforcement learning (RL) and Bayesian optimization (BO) and do not rely on any mathematical model of the wind-turbine dynamics, in contrast to classical approaches designed on linearized models. The model-free controllers were benchmarked against a proportional-integral-derivative (PID) regulator in a numerical environment using Blade Element Momentum theory for computing the aerodynamic torque and the blade loads. The results showed that the model-free approaches could increase power harvesting while reducing wind turbine loads. △ Less

Submitted 13 July, 2022; originally announced July 2022.

A RANS approach to the Meshless Computation of Pressure Fields From Image Velocimetry

Authors: Pietro Sperotto, Sandra Pieraccini, Miguel A. Mendez

Abstract: We propose a 3D meshless method to compute mean pressure fields in turbulent flows from image velocimetry. The method is an extension of the constrained Radial Basis Function (RBF) formulation by \citet{Sperotto2022} to a Reynolds Averaged Navier Stokes (RANS) framework. This is designed to handle both scattered data as in Particle Tracking Velocimetry (PTV) and data in uniform grids as in correla… ▽ More We propose a 3D meshless method to compute mean pressure fields in turbulent flows from image velocimetry. The method is an extension of the constrained Radial Basis Function (RBF) formulation by \citet{Sperotto2022} to a Reynolds Averaged Navier Stokes (RANS) framework. This is designed to handle both scattered data as in Particle Tracking Velocimetry (PTV) and data in uniform grids as in correlation-based Particle Image Velocimetry (PIV). The RANS extension includes the Reynolds stresses into the constrained least square problem. We test the approach on a numerical database featuring a Backward Facing Step (BFS) with a Reynolds number of 6400 (defined with respect to the inlet velocity and step height), obtained via Direct Numerical Simulation (DNS). △ Less

Submitted 11 July, 2022; originally announced July 2022.

Journal ref: presented at LXLASER2022

Quantifying rare events in spotting: How far do wildfires spread?

Authors: Alex Mendez, Mohammad Farazmand

Abstract: Spotting refers to the transport of burning pieces of firebrand by wind which, at the time of landing, may ignite new fires beyond the direct ignition zone of the main fire. Spot fires that occur far from the original burn unit are rare but have consequential ramifications since their prediction and control remains challenging. To facilitate their prediction, we examine three methods for quantifyi… ▽ More Spotting refers to the transport of burning pieces of firebrand by wind which, at the time of landing, may ignite new fires beyond the direct ignition zone of the main fire. Spot fires that occur far from the original burn unit are rare but have consequential ramifications since their prediction and control remains challenging. To facilitate their prediction, we examine three methods for quantifying the landing distribution of firebrands: crude Monte Carlo simulations, importance sampling, and large deviation theory (LDT). In particular, we propose an LDT method that accurately and parsimoniously quantifies the low probability events at the tail of the landing distribution. In contrast, Monte Carlo and importance sampling methods are most efficient in quantifying the high probability landing distances near the mode of the distribution. However, they become computationally intractable for quantifying the tail of the distribution due to the large sample size required. We also show that the most probable landing distance grows linearly with the mean characteristic velocity of the wind field. Furthermore, defining the relative landed mass as the proportion of mass landed at a given distance from the main fire, we derive an explicit formula which allows computing this quantity as a function of the landing distribution at a negligible computational cost. We numerically demonstrate our findings on two prescribed wind fields. △ Less

Submitted 2 May, 2022; originally announced May 2022.

Evolution of waves in liquid films on moving substrates

Authors: Tsvetelina Ivanova, Fabio Pino, Benoit Scheid, Miguel A. Mendez

Abstract: Accurate and computationally accessible models of liquid film flows allow for optimizing coating processes such as hot-dip galvanization and vertical slot-die coating. This paper extends the classic three-dimensional integral boundary layer (IBL) model for falling liquid films (FF) to account for a moving substrate (MS). We analyze the stability of the liquid films on vertically moving substrates… ▽ More Accurate and computationally accessible models of liquid film flows allow for optimizing coating processes such as hot-dip galvanization and vertical slot-die coating. This paper extends the classic three-dimensional integral boundary layer (IBL) model for falling liquid films (FF) to account for a moving substrate (MS). We analyze the stability of the liquid films on vertically moving substrates in a linear and a nonlinear setting. In the linear analysis, we derive the dispersion relation and the temporal growth rates of an infinitesimal disturbance using normal modes and linearized governing equations. In the nonlinear analysis, we consider disturbances of finite size and numerically compute their evolution using the set of nonlinear equations in which surface tension has been removed. We present the region of (linear) stability of both FF and MS configurations, and we place the operating conditions of an industrial galvanizing line in these maps. A wide range of flow conditions was analyzed and shown to be stable according to linear and nonlinear stability analyses. Moreover, the nonlinear analysis, carried out in the absence of surface tension, reveals a nonlinear stabilizing mechanism for the interface dynamics of a liquid film dragged by an upward-moving substrate. △ Less

Submitted 18 January, 2023; v1 submitted 15 March, 2022; originally announced March 2022.

Bayesian inference in single-line spectroscopic binaries with a visual orbit

Authors: Miguel Videla, Rene A. Mendez, Ruben M. Claveria, Jorge F. Silva, Marcos E. Orchard

Abstract: We present a Bayesian inference methodology for the estimation of orbital parameters on single-line spectroscopic binaries with astrometric data, based on the No-U-Turn sampler Markov chain Monte Carlo algorithm. Our approach is designed to provide a precise and efficient estimation of the joint posterior distribution of the orbital parameters in the presence of partial and heterogeneous observati… ▽ More We present a Bayesian inference methodology for the estimation of orbital parameters on single-line spectroscopic binaries with astrometric data, based on the No-U-Turn sampler Markov chain Monte Carlo algorithm. Our approach is designed to provide a precise and efficient estimation of the joint posterior distribution of the orbital parameters in the presence of partial and heterogeneous observations. This scheme allows us to directly incorporate prior information about the system - in the form of a trigonometric parallax, and an estimation of the mass of the primary component from its spectral type - to constrain the range of solutions, and to estimate orbital parameters that cannot be usually determined (e.g. the individual component masses), due to the lack of observations or imprecise measurements. Our methodology is tested by analyzing the posterior distributions of well-studied double-line spectroscopic binaries treated as single-line binaries by omitting the radial velocity data of the secondary object. Our results show that the system's mass ratio can be estimated with an uncertainty smaller than 10% using our approach. As a proof of concept, the proposed methodology is applied to twelve single-line spectroscopic binaries with astrometric data that lacked a joint astrometric-spectroscopic solution, for which we provide full orbital elements. Our sample-based methodology allows us also to study the impact of different posterior distributions in the corresponding observations space. This novel analysis provides a better understanding of the effect of the different sources of information on the shape and uncertainty of the orbit and radial velocity curve. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: Accepted for publication to the Astronomical Journal.39 pages, 7 Tables, 18 Figures, two Appendices

Analysis of an unsteady quasi-capillary channel flow with Time Resolved PIV and RBF-based super resolution

Authors: Manuel Ratz, Domenico Fiorini, Alessia Simonini, Christian Cierpka, Miguel A. Mendez

Abstract: We investigate the behaviour of accelerating contact lines in an unsteady quasi-capillary channel flow. The configuration consists of a liquid column that moves along a vertical 2D channel, open to the atmosphere and driven by a controlled pressure head. Both advancing and receding contact lines were analyzed to test the validity of classic models for dynamic wetting and to study the flow field ne… ▽ More We investigate the behaviour of accelerating contact lines in an unsteady quasi-capillary channel flow. The configuration consists of a liquid column that moves along a vertical 2D channel, open to the atmosphere and driven by a controlled pressure head. Both advancing and receding contact lines were analyzed to test the validity of classic models for dynamic wetting and to study the flow field near the interface. The operating conditions are characterized by a large acceleration, thus dominated by inertia. The shape of the moving meniscus was retrieved using Laser-Induced Fluorescence (LIF)-based image processing while the flow field near was analyzed via Time-Resolved Particle Image Velocimetry (TR-PIV). The TR-PIV measurements were enhanced in the post-processing, using a combination of Proper Orthogonal Decomposition (POD) and Radial Basis Functions (RBF) to achieve super-resolution of the velocity field. Large counter-rotating vortices were observed, and their evolution was monitored in terms of the maximum intensity of the Q-field. The results show that classic contact angle laws based on interface velocity cannot describe the evolution of the contact angle at a macroscopic scale. Moreover, the impact of the interface dynamics on the flow field is considerable and extends several capillary lengths below the interface. △ Less

Submitted 10 May, 2022; v1 submitted 28 February, 2022; originally announced February 2022.

Challenges and Opportunities for Machine Learning in Fluid Mechanics

Authors: M. A. Mendez, J. Dominique, M. Fiore, F. Pino, P. Sperotto, J. Van den Berghe

Abstract: Big data and machine learning are driving comprehensive economic and social transformations and are rapidly re-shaping the toolbox and the methodologies of applied scientists. Machine learning tools are designed to learn functions from data with little to no need of prior knowledge. As continuous developments in experimental and numerical methods improve our ability to collect high-quality data, m… ▽ More Big data and machine learning are driving comprehensive economic and social transformations and are rapidly re-shaping the toolbox and the methodologies of applied scientists. Machine learning tools are designed to learn functions from data with little to no need of prior knowledge. As continuous developments in experimental and numerical methods improve our ability to collect high-quality data, machine learning tools become increasingly viable and promising also in disciplines rooted in physical principles. These notes explore how machine learning can be integrated and combined with more classic methods in fluid dynamics. After a brief review of the machine learning landscape, we show how many problems in fluid mechanics can be framed as machine learning problems and we explore challenges and opportunities. We consider several relevant applications: aeroacoustic noise prediction, turbulence modelling, reduced-order modelling and forecasting, meshless integration of (partial) differential equations, super-resolution and flow control. While this list is by no means exhaustive, the presentation will provide enough concrete examples to offer perspectives on how machine learning might impact the way we do research and learn from data. △ Less

Submitted 13 April, 2024; v1 submitted 25 February, 2022; originally announced February 2022.

Comments: Chapter written for the VKI Lecture Series "Optimization Methods for Computational Fluid Dynamics", organized by Tom Verstraete

Comparative analysis of machine learning methods for active flow control

Authors: Fabio Pino, Lorenzo Schena, Jean Rabault, Miguel A. Mendez

Abstract: Machine learning frameworks such as Genetic Programming (GP) and Reinforcement Learning (RL) are gaining popularity in flow control. This work presents a comparative analysis of the two, bench-marking some of their most representative algorithms against global optimization techniques such as Bayesian Optimization (BO) and Lipschitz global optimization (LIPO). First, we review the general framework… ▽ More Machine learning frameworks such as Genetic Programming (GP) and Reinforcement Learning (RL) are gaining popularity in flow control. This work presents a comparative analysis of the two, bench-marking some of their most representative algorithms against global optimization techniques such as Bayesian Optimization (BO) and Lipschitz global optimization (LIPO). First, we review the general framework of the model-free control problem, bringing together all methods as black-box optimization problems. Then, we test the control algorithms on three test cases. These are (1) the stabilization of a nonlinear dynamical system featuring frequency cross-talk, (2) the wave cancellation from a Burgers' flow and (3) the drag reduction in a cylinder wake flow. We present a comprehensive comparison to illustrate their differences in exploration versus exploitation and their balance between `model capacity' in the control law definition versus `required complexity'. We believe that such a comparison paves the way toward the hybridization of the various methods, and we offer some perspective on their future development in the literature on flow control problems. △ Less

Submitted 9 November, 2022; v1 submitted 23 February, 2022; originally announced February 2022.

Comments: submitted to Journal of Fluid Mechanics

Physics-constrained machine learning for thermal turbulence modelling at low Prandtl numbers

Authors: Matilde Fiore, Lilla Koloszar, Miguel Alfonso Mendez, Matthieu Duponcheel, Yann Bartosiewicz

Abstract: Liquid metals play a central role in new generation liquid metal cooled nuclear reactors, for which numerical investigations require the use of appropriate thermal turbulence models for low Prandtl number fluids. Given the limitations of traditional modelling approaches and the increasing availability of high-fidelity data for this class of fluids, we propose a Machine Learning strategy for the mo… ▽ More Liquid metals play a central role in new generation liquid metal cooled nuclear reactors, for which numerical investigations require the use of appropriate thermal turbulence models for low Prandtl number fluids. Given the limitations of traditional modelling approaches and the increasing availability of high-fidelity data for this class of fluids, we propose a Machine Learning strategy for the modelling of the turbulent heat flux. A comprehensive algebraic mathematical structure is derived and physical constraints are imposed to ensure attractive properties promoting applicability, robustness and stability. The closure coefficients of the model are predicted by an Artificial Neural Network (ANN) which is trained with DNS data at different Prandtl numbers. The validity of the approach was verified through a priori and a posteriori validation for two and three-dimensional liquid metal flows. The model provides a complete vectorial representation of the turbulent heat flux and the predictions fit the DNS data in a wide range of Prandtl numbers (Pr=0.01-0.71). The comparison with other existing thermal models shows that the methodology is very promising. △ Less

Submitted 17 January, 2022; originally announced January 2022.

Orbital elements and individual component masses from joint spectroscopic and astrometric data of double-line spectroscopic binaries

Authors: Jennifer Anguita-Aguero, Rene A. Mendez, Ruben M. Claveria, Edgardo Costa

Abstract: We present orbital elements, orbital parallaxes and individual component masses, for fourteen spatially resolved double-line spectroscopic binaries derived doing a simultaneous fit of their visual orbit and radial velocity curve. This was done by means of a Markov Chain Monte Carlo code developed by our group, which produces posterior distribution functions and error estimates for all the paramete… ▽ More We present orbital elements, orbital parallaxes and individual component masses, for fourteen spatially resolved double-line spectroscopic binaries derived doing a simultaneous fit of their visual orbit and radial velocity curve. This was done by means of a Markov Chain Monte Carlo code developed by our group, which produces posterior distribution functions and error estimates for all the parameters. Of this sample, six systems had high quality previous studies and were included as benchmarks to test our procedures, but even in these cases we could improve the previous orbits by adding recent data from our survey of southern binaries being carried out with the HRCam and ZORRO speckle cameras at the SOAR 4.1m and Gemini South 8.1m telescopes, respectively. We also give results for eight objects that did not have a published combined orbital solution, one of which did not have a visual orbit either. We could determine mass ratios with a typical uncertainty of less than 1%, mass sums with uncertainties of about 1% and individual component masses with a formal uncertainty of $0.01 M_\odot$ in the best cases. A comparison of our orbital parallaxes with available trigonometric parallaxes from Hipparcos and Gaia eDR3, shows a good correspondence; the mean value of the differences being consistent with zero within the errors of both catalogs. We also present observational HR diagrams for our sample of binaries, which in combination with isochrones from different sources allowed us to asses their evolutionary status and also the quality of their photometry. △ Less

Submitted 11 January, 2022; originally announced January 2022.

Comments: 26 pages, 8 figures. Accepted for publication in The Astronomical Journal

Statistical Treatment, Fourier and Modal Decomposition

Authors: Miguel Alfonso Mendez

Abstract: These are lecture notes for the lecture "Statistical Treatment, Fourier and Modal Decompositions", given at the VKI Lecture series "Fundamentals and Recent Advances in Particle Image Velocimetry and Lagrangian Particle Tracking". The course was held at the von Karman Institute for fluid dynamics from 15 November to 18 November 2021. This lecture provides a guided tour through the processing of dat… ▽ More These are lecture notes for the lecture "Statistical Treatment, Fourier and Modal Decompositions", given at the VKI Lecture series "Fundamentals and Recent Advances in Particle Image Velocimetry and Lagrangian Particle Tracking". The course was held at the von Karman Institute for fluid dynamics from 15 November to 18 November 2021. This lecture provides a guided tour through the processing of data acquired via image velocimetry. Far from being an exhaustive account of the field, which would require an entire course on its own, the scope is to provide a hands-on tutorial. This begins with basic statistical treatment, briefly reviews frequency and modal analysis, and conclude with more advanced research topics such as multiscale modal decompositions and nonlinear dimensionality reduction. The material covered should hopefully propel newcomers into the subject while remaining of interest to experienced practitioners. All the codes related to this lecture are made available on a github repository. △ Less

Submitted 11 January, 2022; originally announced January 2022.

Report number: VKI Lecture Series, ISBN 978-2-87516-181-9

Artificial Neural Networks Modelling of Wall Pressure Spectra Beneath Turbulent Boundary Layers

Authors: J. Dominique, J. Van den Berghe, C. Schram, M. A. Mendez

Abstract: We analyse and compare various empirical models of wall pressure spectra beneath turbulent boundary layers and propose an alternative machine learning approach using Artificial Neural Networks (ANN). The analysis and the training of the ANN are performed on data from experiments and high-fidelity simulations by various authors, covering a wide range of flow conditions. We present a methodology to… ▽ More We analyse and compare various empirical models of wall pressure spectra beneath turbulent boundary layers and propose an alternative machine learning approach using Artificial Neural Networks (ANN). The analysis and the training of the ANN are performed on data from experiments and high-fidelity simulations by various authors, covering a wide range of flow conditions. We present a methodology to extract all the turbulent boundary layer parameters required by these models, also considering flows experiencing strong adverse pressure gradients. Moreover, the database is explored to unveil important dependencies within the boundary layer parameters and to propose a possible set of features from which the ANN should predict the wall pressure spectra. The results show that the ANN outperforms traditional models in adverse pressure gradients, and its predictive capabilities generalise better over the range of investigated conditions. The analysis is completed with a deep ensemble approach for quantifying the uncertainties in the model prediction and integrated gradient analysis of the model sensitivity to its inputs. Uncertainties and sensitivities allow for identifying the regions where new training data would be most beneficial to the model's accuracy, thus opening the path towards a self-calibrating modelling approach. △ Less

Submitted 10 January, 2022; originally announced January 2022.

Comments: 18 pages, 14 figures, submitted for review to Physics of Fluids, code accessible at https://github.com/DominiqueVKI/VKI_researchWPS

Journal ref: Physics of Fluids (Vol.34, Issue 3), 2022

A Meshless Method to Compute Pressure Fields from Image Velocimetry

Authors: Pietro Sperotto, Sandra Pieraccini, Miguel A. Mendez

Abstract: We propose a meshless method to compute pressure fields from image velocimetry data, regardless of whether this is available on a regular grid as in cross-correlation based velocimetry or on scattered points as in tracking velocimetry. The proposed approach is based on Radial Basis Functions (RBFs) regression and relies on the solution of two constrained least square problems. The first one is the… ▽ More We propose a meshless method to compute pressure fields from image velocimetry data, regardless of whether this is available on a regular grid as in cross-correlation based velocimetry or on scattered points as in tracking velocimetry. The proposed approach is based on Radial Basis Functions (RBFs) regression and relies on the solution of two constrained least square problems. The first one is the regression of the measurements to create an analytic representation of the velocity field. This regression can be constrained to impose boundary conditions (e.g. no-slip velocity on a wall or inlet conditions) or differential constraints (e.g. the solenoidal condition for an incompressible flow). The second one is the meshless integration of the pressure Poisson equation, achieved by seeking a solution in the form of a RBF expansion and using constraints to impose boundary conditions. We first illustrate the derivation of the two least square problems and the numerical techniques implemented for their solution. Then, we showcase the method with three numerical test cases of growing complexity. These are a 2D Gaussian Vortex, a 2D flow past a cylinder from CFD and a 3D Stokes flow past a sphere. For each case, we consider randomly sampled vector fields simulating particle tracking measurements and analyze the sensitivity to noise and seeding density. △ Less

Submitted 9 May, 2022; v1 submitted 23 December, 2021; originally announced December 2021.

Comments: Submitted to Measurement Science and Technology