-
Accelerator Neutrino Neutron Interaction Experiment (ANNIE): Preliminary Results and Physics Phase Proposal
Authors:
A. R. Back,
J. F. Beacom,
M. Bergevin,
E. Catano-Mur,
S. Dazeley,
E. Drakopoulou,
F. Di Lodovico,
A. Elagin,
J. Eisch,
V. Fischer,
S. Gardiner,
R. Hatcher,
J. He,
R. Hill,
T. Katori,
F. Krennrich,
R. Kreymer,
M. Malek,
C. L. McGivern,
M. Needham,
M. O'Flaherty,
G. D. Orebi Gann,
B. Richards,
M. C. Sanchez,
M. Smy
, et al. (6 additional authors not shown)
Abstract:
The R&D mission of the Accelerator Neutrino Neutron Interaction Experiment (ANNIE) is described in detail. ANNIE is: (1) an important measurement of neutrino-nucleus interactions focusing specifically on neutron production, and (2) an R&D effort focused on using new photodetector technology and chemical additives to make advanced water-base neutrino detectors. The ANNIE experiment consists of a sm…
▽ More
The R&D mission of the Accelerator Neutrino Neutron Interaction Experiment (ANNIE) is described in detail. ANNIE is: (1) an important measurement of neutrino-nucleus interactions focusing specifically on neutron production, and (2) an R&D effort focused on using new photodetector technology and chemical additives to make advanced water-base neutrino detectors. The ANNIE experiment consists of a small Water Cherenkov detector, instrumented with both conventional photomultiplier tubes (PMTs) and Large Area Picosecond Photodetectors (LAPPDs) deployed on the Booster Neutrino Beam (BNB) at Fermilab. The experiment is designed to proceed in two stages: a partially-instrumented test-beam run using only PMTs (Phase I) for the purpose of measuring critical neutron backgrounds to the experiment; and a physics run with a fully-instrumented detector (Phase II). This paper gives preliminary results of the first phase and described the detector design upgrades necessary for the next phase.
△ Less
Submitted 8 August, 2017; v1 submitted 25 July, 2017;
originally announced July 2017.
-
Neutrino Flux Predictions for the NuMI Beam
Authors:
MINERvA Collaboration,
L. Aliaga,
M. Kordosky,
T. Golan,
O. Altinok,
L. Bellantoni,
A. Bercellie,
M. Betancourt,
A. Bravar,
H. Budd,
M. F. Carneiro,
G. A. Diaz,
E. Endress,
J. Felix,
L. Fields,
R. Fine,
A. M. Gago,
R. Galindo,
H. Gallagher,
R. Gran,
D. A. Harris,
A. Higuera,
K. Hurtado,
M. Kiveni,
J. Kleykamp
, et al. (36 additional authors not shown)
Abstract:
Knowledge of the neutrino flux produced by the Neutrinos at the Main Injector (NuMI) beamline is essential to the neutrino oscillation and neutrino interaction measurements of the MINERvA, MINOS+, NOvA and MicroBooNE experiments at Fermi National Accelerator Laboratory. We have produced a flux prediction which uses all available and relevant hadron production data, incorporating measurements of pa…
▽ More
Knowledge of the neutrino flux produced by the Neutrinos at the Main Injector (NuMI) beamline is essential to the neutrino oscillation and neutrino interaction measurements of the MINERvA, MINOS+, NOvA and MicroBooNE experiments at Fermi National Accelerator Laboratory. We have produced a flux prediction which uses all available and relevant hadron production data, incorporating measurements of particle production off of thin targets as well as measurements of particle yields from a spare NuMI target exposed to a 120 GeV proton beam. The result is the most precise flux prediction achieved for a neutrino beam in the one to tens of GeV energy region. We have also compared the prediction to in situ measurements of the neutrino flux and find good agreement.
△ Less
Submitted 11 July, 2016; v1 submitted 3 July, 2016;
originally announced July 2016.
-
Measurement of $K^{+}$ production in charged-current $ν_μ$ interactions
Authors:
C. M. Marshall,
L. Aliaga,
O. Altinok,
L. Bellantoni,
A. Bercellie,
M. Betancourt,
A. Bodek,
A. Bravar,
H. Budd,
T. Cai,
M. F. Carneiro,
J. Chvojka,
H. da Motta,
J. Devan,
S. A. Dytman,
G. A. Díaz,
B. Eberly,
E. Endress,
J. Felix,
L. Fields,
A. Filkins,
R. Fine,
A. M. Gago,
R. Galindo,
H. Gallagher
, et al. (57 additional authors not shown)
Abstract:
Production of K^{+} mesons in charged-current ν_μ interactions on plastic scintillator (CH) is measured using MINERvA exposed to the low-energy NuMI beam at Fermilab. Timing information is used to isolate a sample of 885 charged-current events containing a stopping K^{+} which decays at rest. The differential cross section in K^{+} kinetic energy, dσ/dT_{K}, is observed to be relatively flat betwe…
▽ More
Production of K^{+} mesons in charged-current ν_μ interactions on plastic scintillator (CH) is measured using MINERvA exposed to the low-energy NuMI beam at Fermilab. Timing information is used to isolate a sample of 885 charged-current events containing a stopping K^{+} which decays at rest. The differential cross section in K^{+} kinetic energy, dσ/dT_{K}, is observed to be relatively flat between 0 and 500 MeV. Its shape is in good agreement with the prediction by the \textsc{genie} neutrino event generator when final-state interactions are included, however the data rate is lower than the prediction by 15\%.
△ Less
Submitted 25 July, 2016; v1 submitted 13 April, 2016;
originally announced April 2016.
-
Evidence for neutral-current diffractive neutral pion production from hydrogen in neutrino interactions on hydrocarbon
Authors:
MINERvA Collaboration,
J. Wolcott,
L. Aliaga,
O. Altinok,
A. Bercellie,
M. Betancourt,
A. Bodek,
A. Bravar,
H. Budd,
T. Cai,
M. F. Carneiro,
J. Chvojka,
H. da Motta,
J. Devan,
S. A. Dytman,
G. A. Díaz,
B. Eberly,
E. Endress,
J. Felix,
L. Fields,
R. Fine,
R. Galindo,
H. Gallagher,
T. Golan,
R. Gran
, et al. (46 additional authors not shown)
Abstract:
The MINERvA experiment observes an excess of events containing electromagnetic showers relative to the expectation from Monte Carlo simulations in neutral-current neutrino interactions with mean beam energy of 4.5 GeV on a hydrocarbon target. The excess is characterized and found to be consistent with neutral-current neutral pion production with a broad energy distribution peaking at 7 GeV and a t…
▽ More
The MINERvA experiment observes an excess of events containing electromagnetic showers relative to the expectation from Monte Carlo simulations in neutral-current neutrino interactions with mean beam energy of 4.5 GeV on a hydrocarbon target. The excess is characterized and found to be consistent with neutral-current neutral pion production with a broad energy distribution peaking at 7 GeV and a total cross section of 0.26 +- 0.02 (stat) +- 0.08 (sys) x 10^{-39} cm^{2}. The angular distribution, electromagnetic shower energy, and spatial distribution of the energy depositions of the excess are consistent with expectations from neutrino neutral-current diffractive neutral pion production from hydrogen in the hydrocarbon target. These data comprise the first direct experimental observation and constraint for a reaction that poses an important background process in neutrino oscillation experiments searching for muon neutrino to electron neutrino oscillations.
△ Less
Submitted 28 July, 2016; v1 submitted 6 April, 2016;
originally announced April 2016.
-
Measurement of Neutrino Flux from Neutrino-Electron Elastic Scattering
Authors:
MINERvA Collaboration,
J. Park,
L. Aliaga,
O. Altinok,
L. Bellantoni,
A. Bercellie,
M. Betancourt,
A. Bodek,
A. Bravar,
H. Budd,
T. Cai,
M. F. Carneiro,
M. E. Christy,
J. Chvojka,
H. da Motta,
S. A. Dytman,
G. A. Diaz,
B. Eberly,
J. Felix,
L. Fields,
R. Fine,
A. M. Gago,
R. Galindo,
A. Ghosh,
T. Golan
, et al. (44 additional authors not shown)
Abstract:
Muon-neutrino elastic scattering on electrons is an observable neutrino process whose cross section is precisely known. Consequently a measurement of this process in an accelerator-based $ν_μ$ beam can improve the knowledge of the absolute neutrino flux impinging upon the detector; typically this knowledge is limited to $\sim$ 10% due to uncertainties in hadron production and focusing. We have iso…
▽ More
Muon-neutrino elastic scattering on electrons is an observable neutrino process whose cross section is precisely known. Consequently a measurement of this process in an accelerator-based $ν_μ$ beam can improve the knowledge of the absolute neutrino flux impinging upon the detector; typically this knowledge is limited to $\sim$ 10% due to uncertainties in hadron production and focusing. We have isolated a sample of 135 $\pm$ 17 neutrino-electron elastic scattering candidates in the segmented scintillator detector of MINERvA, after subtracting backgrounds and correcting for efficiency. We show how this sample can be used to reduce the total uncertainty on the NuMI $ν_μ$ flux from 9% to 6%. Our measurement provides a flux constraint that is useful to other experiments using the NuMI beam, and this technique is applicable to future neutrino beams operating at multi-GeV energies.
△ Less
Submitted 15 June, 2016; v1 submitted 23 December, 2015;
originally announced December 2015.
-
MINERvA neutrino detector response measured with test beam data
Authors:
MINERvA Collaboration,
L. Aliaga,
O. Altinok,
C. Araujo Del Castillo,
L. Bagby,
L. Bellantoni,
W. F. Bergan,
A. Bodek,
R. Bradford,
A. Bravar,
H. Budd,
A. Butkevich,
D. A. Martinez Caicedo,
M. F. Carneiro,
M. E. Christy,
J. Chvojka,
H. da Motta,
J. Devan,
G. A. Diaz,
S. A. Dytman,
B. Eberly,
J. Felix,
L. Fields,
R. Fine,
R. Flight
, et al. (63 additional authors not shown)
Abstract:
The MINERvA collaboration operated a scaled-down replica of the solid scintillator tracking and sampling calorimeter regions of the MINERvA detector in a hadron test beam at the Fermilab Test Beam Facility. This article reports measurements with samples of protons, pions, and electrons from 0.35 to 2.0 GeV/c momentum. The calorimetric response to protons, pions, and electrons are obtained from the…
▽ More
The MINERvA collaboration operated a scaled-down replica of the solid scintillator tracking and sampling calorimeter regions of the MINERvA detector in a hadron test beam at the Fermilab Test Beam Facility. This article reports measurements with samples of protons, pions, and electrons from 0.35 to 2.0 GeV/c momentum. The calorimetric response to protons, pions, and electrons are obtained from these data. A measurement of the parameter in Birks' law and an estimate of the tracking efficiency are extracted from the proton sample. Overall the data are well described by a Geant4-based Monte Carlo simulation of the detector and particle interactions with agreements better than 4%, though some features of the data are not precisely modeled. These measurements are used to tune the MINERvA detector simulation and evaluate systematic uncertainties in support of the MINERvA neutrino cross section measurement program.
△ Less
Submitted 7 April, 2015; v1 submitted 26 January, 2015;
originally announced January 2015.
-
Design, Calibration, and Performance of the MINERvA Detector
Authors:
L. Aliaga,
L. Bagby,
B. Baldin,
A. Baumbaugh,
A. Bodek,
R. Bradford,
W. K. Brooks,
D. Boehnlein,
S. Boyd,
H. Budd,
A. Butkevich,
D. A. Martinez Caicedo,
C. M. Castromonte,
M. E. Christy,
J. Chvojka,
H. da Motta,
D. S. Damiani,
I. Danko,
M. Datta,
R. DeMaat,
J. Devan,
E. Draeger,
S. A. Dytman,
G. A. Diaz,
B. Eberly
, et al. (80 additional authors not shown)
Abstract:
The MINERvA experiment is designed to perform precision studies of neutrino-nucleus scattering using $ν_μ$ and ${\barν}_μ$ neutrinos incident at 1-20 GeV in the NuMI beam at Fermilab. This article presents a detailed description of the \minerva detector and describes the {\em ex situ} and {\em in situ} techniques employed to characterize the detector and monitor its performance. The detector is co…
▽ More
The MINERvA experiment is designed to perform precision studies of neutrino-nucleus scattering using $ν_μ$ and ${\barν}_μ$ neutrinos incident at 1-20 GeV in the NuMI beam at Fermilab. This article presents a detailed description of the \minerva detector and describes the {\em ex situ} and {\em in situ} techniques employed to characterize the detector and monitor its performance. The detector is comprised of a finely-segmented scintillator-based inner tracking region surrounded by electromagnetic and hadronic sampling calorimetry. The upstream portion of the detector includes planes of graphite, iron and lead interleaved between tracking planes to facilitate the study of nuclear effects in neutrino interactions. Observations concerning the detector response over sustained periods of running are reported. The detector design and methods of operation have relevance to future neutrino experiments in which segmented scintillator tracking is utilized.
△ Less
Submitted 22 May, 2013;
originally announced May 2013.
