-
Simultaneous Crystallization Effects in Multiple Levitated Plasma-Functionalized Graphene Nanoflake Nanofluid Droplets
Authors:
Adam McElligott,
André Guerra,
Alejandro D. Rey,
Phillip Servio
Abstract:
Acoustic levitation is a container-free method for examining novel crystallization effects, though liquid-to-solid phase change has seen little investigation for levitated nanofluids. Recent developments have allowed for examining the morphological and temperature evolution of multiple levitated nanofluid droplets freezing simultaneously. The fundamental effect of adding nanoparticles to a levitat…
▽ More
Acoustic levitation is a container-free method for examining novel crystallization effects, though liquid-to-solid phase change has seen little investigation for levitated nanofluids. Recent developments have allowed for examining the morphological and temperature evolution of multiple levitated nanofluid droplets freezing simultaneously. The fundamental effect of adding nanoparticles to a levitated crystallization system is crystal growth rate enhancement from improved mass transfer at the growing solid front. Nucleation times are unaffected as freezing is initiated by secondary ice nucleation particles (INPs). Instead, the enhancement produces higher instantaneous nucleation pressures and more cracking in the primary ice shell. In turn, more INPs are ejected, resulting in faster protrusion formation on the droplet surface (hastened further in systems containing adjacent droplets). The crystal matrix also includes more defects, resulting in liquid escaping and forming beads at the droplet base and optical clarity loss. During crystal decomposition, thermal gradients create convective currents dampened by the same transport phenomena that enhance crystal growth. Suspension loss after a crystallization-decomposition cycle reduced opacity and light absorbance such that the droplets were 62% closer in appearance to water. However, the non-isobaric, sample-encompassing cooling process resulted in smaller particle clusters than if the droplets were frozen on a solid surface.
△ Less
Submitted 11 September, 2024;
originally announced September 2024.
-
Dynamics of Acoustically Levitated Ice Impacts on Smooth and Textured Surfaces: Effects of Surface Roughness, Elasticity, and Structure
Authors:
Adam McElligott,
André Guerra,
Alexandre Brailovski,
Shashini Rathnayaka,
Xiaodan Zhu,
Alexia Denoncourt,
Alejandro D. Rey,
Anne-Marie Kietzig,
Phillip Servio
Abstract:
Through acoustically levitated ice formation and subsequent release onto a controlled area, this study introduces a third class of ice-countering system beyond de- and anti-icing: ice-impacting. By subjecting stainless steel 316 (SS), epoxy resin-coated (ER), and laser-textured (LT) surfaces with known surface roughness, hardness, and structural characteristics to 40 ice droplet impacts each, the…
▽ More
Through acoustically levitated ice formation and subsequent release onto a controlled area, this study introduces a third class of ice-countering system beyond de- and anti-icing: ice-impacting. By subjecting stainless steel 316 (SS), epoxy resin-coated (ER), and laser-textured (LT) surfaces with known surface roughness, hardness, and structural characteristics to 40 ice droplet impacts each, the effect on surface properties and their effect on solid-solid interfacial impact dynamics, in turn, was examined using a novel analysis framework based on fundamental conservation laws. For the velocities experienced in this study, the impacts did not affect the surface properties; they were consistent after each impact. Elasticity was the most significant factor in droplet behavior: the ER surface exhibited rebounding for 78% of impacts (important for moving surfaces). Surface roughness also played a role, particularly for droplets with rotational motion, as immobilization occurred for 66% of impacts on the rougher LT surface. However, the nanostructures on that textured surface resulted in droplet redirection perpendicular to the surface directionality (critical for stationary surfaces). In contrast, the other surfaces saw no change or no consistent change in rebound angle. Elasticity also affected momentum retention, where the ER surface had a translational restitution coefficient of 0.32 compared to 0.17 for the two stainless steel surfaces. Surface roughness was the predominant aspect of energy retention: the LT surface had a translational-to-rotational energy transfer coefficient of 0.07 (0.23 for the smoother surfaces), resulting in an overall energy retention coefficient of 0.09 compared to 0.28 for the SS and ER surfaces on average.
△ Less
Submitted 16 November, 2023;
originally announced November 2023.
-
Dynamic Viscosity of Methane Hydrate Systems from Non-Einsteinian, Plasma-Functionalized Carbon Nanotube Nanofluids
Authors:
Adam McElligott,
André Guerra,
Chong Yang Du,
Alejandro D. Rey,
Jean-Luc Meunier,
Phillip Servio
Abstract:
The viscosity of oxygen-functionalized multi-walled carbon nanotube (O-MWCNT) nanofluids was measured for concentrations from 0.1 to 10 ppm under conditions of 0 to 30 MPag pressures and 0 to 10 C temperatures. The presence of O-MWCNTs did not affect the temperature dependence of viscosity but did reduce the effective viscosity of solution due to cumulative hydrogen bond-disrupting surface effects…
▽ More
The viscosity of oxygen-functionalized multi-walled carbon nanotube (O-MWCNT) nanofluids was measured for concentrations from 0.1 to 10 ppm under conditions of 0 to 30 MPag pressures and 0 to 10 C temperatures. The presence of O-MWCNTs did not affect the temperature dependence of viscosity but did reduce the effective viscosity of solution due to cumulative hydrogen bond-disrupting surface effects, which overcame internal drag forces. O-MWCNTs added a weak pressure dependence to the viscosity of solution because of their ability to align more with the flow direction as pressure increased. In the liquid to hydrate phase transition, the times to reach the maximum viscosity were faster in O-MWCNT systems compared to the pure water baseline. However, the presence of O-MWCNTs limited the conditions at which hydrates formed as increased nanoparticle collisions in those systems inhibited the formation of critical clusters of hydrate nuclei. The times to viscosity values most relevant to technological applications were minimally 28.02 % (200 mPa s) and 21.08 % (500 mPa s) slower than the baseline, both in the 1 ppm system, even though all systems were faster to the final viscosity. This was attributed to O-MWCNT entanglement, which resulted in a hydrate slurry occurring at lower viscosity values.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Effects of Poly(styrene/pentafluorostyrene-block-vinylpyrrolidone) Amphiphilic Kinetic Hydrate Inhibitors on the Dynamic Viscosity of Methane Hydrate Systems at High-Pressure Driving Forces
Authors:
Chong Yang Du,
André Guerra,
Adam McElligott,
Milan Marić,
Phillip Servio
Abstract:
Reversible addition-fragmentation chain-transfer polymerization with a switchable chain-transfer agent was employed to synthesize amphiphilic block copolymers poly(styrene-b-vinylpyrrolidone) and poly(pentafluorostyrene-b-vinylpyrrolidone) at 10 wt.% hydrophobic content as kinetic hydrate inhibitors for methane hydrates. The dynamic viscosity of methane hydrate slurries was measured in a high-pres…
▽ More
Reversible addition-fragmentation chain-transfer polymerization with a switchable chain-transfer agent was employed to synthesize amphiphilic block copolymers poly(styrene-b-vinylpyrrolidone) and poly(pentafluorostyrene-b-vinylpyrrolidone) at 10 wt.% hydrophobic content as kinetic hydrate inhibitors for methane hydrates. The dynamic viscosity of methane hydrate slurries was measured in a high-pressure rheometer up to 15 MPag. At 700 ppm of additives in aqueous media, the relative time for slurries to grow to 200 mPa s was 2.2-2.4 times longer than water reference values for the block copolymers. In contrast, it was only 1.3 for the poly(vinylpyrrolidone) homopolymer, demonstrating a reduced tendency for hydrate particle adhesion in block copolymer solutions. By increasing the concentration to 7000 ppm, however, the relative time only increased to 2.6-2.7. On the other hand, a block copolymer with 5 wt.% poly(pentafluorostyrene) block at 7000 ppm reached 3.5, which may indicate that the optimal hydrophobic content differs for each amphiphilic polymer and depends on monomer selection. No significant effect of polymer aggregation on hydrate growth was observed for the copolymers used in this study, which had the same hydrophobic percentage and molecular weights between 10,000 and 40,000 g/mol.
△ Less
Submitted 1 April, 2023;
originally announced April 2023.
-
Non-Einsteinian Viscosity Behavior in Plasma-Functionalized Graphene Nanoflake Nanofluids and their Effect on the Dynamic Viscosity of Methane Hydrate Systems
Authors:
Adam McElligott,
André Guerra,
Chong Yang Du,
Alejandro D. Rey,
Jean-Luc Meunier,
Phillip Servio
Abstract:
Water's viscosity dependence on pressure was also not affected by O-GNFs, except at 10 ppm, where the shuttle effect may have increased the presence of hydrophobic methane bubbles in the solution. Under high pressure, the relative viscosity of the system remained non-Einsteinian at all temperatures except 2C. This may have been because the density anomaly of water was shifted to a colder temperatu…
▽ More
Water's viscosity dependence on pressure was also not affected by O-GNFs, except at 10 ppm, where the shuttle effect may have increased the presence of hydrophobic methane bubbles in the solution. Under high pressure, the relative viscosity of the system remained non-Einsteinian at all temperatures except 2C. This may have been because the density anomaly of water was shifted to a colder temperature as the hydrogen bonding network was weaker. The phase transition from liquid to hydrate was identical to that of pure water, indicating that the presence of different stages of growth was not affected by the presence of O-GNF. However, the times to reach a maximum viscosity were faster in O-GNF systems compared to pure water. This said, the hydrate formation limitations inherent to the measurement system were not overcome by the presence of O-GNFs. The times to application-relevant viscosity values were maximized in the 1 ppm system at 49.75 % (200 mPa.s) and 31.93 % (500 mPa.s) faster than the baseline. Therefore, the presence of O-GNFs allowed for shorter times to desired viscosities and at lower driving forces than the baseline, improving the viability of the hydrate technologies to which they can be added.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Interfacial Effects during Phase Change in Multiple Levitated Tetrahydrofuran Hydrate Droplets
Authors:
Adam McElligott,
André Guerra,
Alexia Denoncourt,
Alejandro D. Rey,
Phillip Servio
Abstract:
In this study, using direct digital and infrared imaging techniques, the freezing of up to three simultaneous THF hydrate droplets was investigated for the first time. Nucleation was initiated at the aqueous solution-air interface. Two pseudo-heterogeneous mechanisms created additional nucleation interfaces: one from cavitation effects entraining microbubbles and another from subvisible ice partic…
▽ More
In this study, using direct digital and infrared imaging techniques, the freezing of up to three simultaneous THF hydrate droplets was investigated for the first time. Nucleation was initiated at the aqueous solution-air interface. Two pseudo-heterogeneous mechanisms created additional nucleation interfaces: one from cavitation effects entraining microbubbles and another from subvisible ice particles, also called hydrate nucleating particles (HNPs), impacting the droplet surface. For systems containing droplets in both the second and third positions, nucleation was statistically simultaneous between all droplets. This effect may have been caused by the high liquid-solid interfacial pressures that developed at nucleation, causing some cracking in the initial hydrate shell around the droplet and releasing additional HNPs (now of hydrate) into the air. During crystallization, the THF hydrate droplets developed a completely white opacity, termed optical clarity loss or OCL. It was suggested that high hydrate growth rates within the droplet resulted in the capture of tiny air bubbles within the solid phase. In turn, light refraction through many smaller bubbles resulted in the OCL. These bubbles created structural inhomogeneities, which may explain how the volumetric expansion of the droplets upon complete solidification was 23.6% compared with 7.4% in pure, stationary THF hydrate systems. Finally, the thermal gradient that developed between the top and bottom of the droplet during melting resulted in a surface tension gradient along the air-liquid interface. In turn, convective cells developed within the droplet, causing it to spin rapidly about the horizontal axis.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Effects of Poly(vinylpyrrolidone) on the Dynamic Viscosity of Methane Hydrate Systems at High-Pressure Driving Forces: Investigation of Concentration, Molecular Weight, and Shear Rate
Authors:
Chong Yang Du,
André Guerra,
Adam McElligott,
Milan Marić,
Alejandro D. Rey,
Phillip Servio
Abstract:
The viscosity of methane hydrate slurries with poly(vinylpyrrolidone) (PVP) at 700 and 7000 ppm by weight, molecular weights of 40,000 (PVP40) and 360,000 (PVP360) Da, and shear rates of 400 and 80 1/s, were measured in a high-pressure rheometer with pressures up to 30 MPag and compared to pure water systems. The additives successfully reduced the formation of high-viscosity slurries, but at low c…
▽ More
The viscosity of methane hydrate slurries with poly(vinylpyrrolidone) (PVP) at 700 and 7000 ppm by weight, molecular weights of 40,000 (PVP40) and 360,000 (PVP360) Da, and shear rates of 400 and 80 1/s, were measured in a high-pressure rheometer with pressures up to 30 MPag and compared to pure water systems. The additives successfully reduced the formation of high-viscosity slurries, but at low concentrations were incapable of delaying hydrate agglomeration at the late growth stage. The average relative time required for PVP40 solutions at 700 ppm to grow to 50 mPa.s was 1.9 times the water reference value, but only 1.2 times to reach 200 mPa.s. Improved inhibition was observed for the higher concentration and higher molecular weight sets, where the relative time to reach 50 mPa.s were 8.2 and 2.6 times the water reference value, respectively. While the additives demonstrated anti-nucleation properties and suppressed crystal growth initially, they accelerated the hydrate clusters agglomeration rate, and potentially weakened the hydrate mechanical properties.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
TinyLev Acoustically Levitated Water: Direct Observation of Collective, Inter-Droplet Effects through Morphological and Thermal Analysis of Multiple Droplets
Authors:
Adam McElligott,
André Guerra,
Michael J. Wood,
Alejandro D. Rey,
Anne-Marie Kietzig,
Phillip Servio
Abstract:
Initially, the acoustic field forced the droplets into an oblate spheroid shape, though the counteracting force of the cooling stream caused them to circularize. Droplet geometry was thus the net result of streaming forces and surface tension at the acoustic boundary layer/air-liquid interface. Nucleation was determined to be neither homogeneous nor heterogeneous but secondary, and thus dependent…
▽ More
Initially, the acoustic field forced the droplets into an oblate spheroid shape, though the counteracting force of the cooling stream caused them to circularize. Droplet geometry was thus the net result of streaming forces and surface tension at the acoustic boundary layer/air-liquid interface. Nucleation was determined to be neither homogeneous nor heterogeneous but secondary, and thus dependent on the cooling rate and not on the degree of supercooling. It was likely initiated by aerosolized ice particles from the air or from droplets that had already nucleated and broken up. The latter secondary ice production process resulted in multi-drop systems with statistically identical nucleation times. Notably, this meant that the presence of interfacial rupture at an adjacent droplet could influence the crystallization behaviour of another. After the formation of an initial ice shell around the individual droplets, dendritic protrusions grew from the droplet surface, likely seeded by the same ice particles that caused nucleation, but at a quasi-liquid layer. When freezing was complete, it was determined that the frozen core had undergone a volumetric expansion of 30.75%, compared to 9% for pure, sessile water expansion. This significantly greater expansion may have resulted from entrained air bubbles at the inner solid-liquid interface and oscillations at the moving phase boundary caused by changes in local acoustic forces. Soon after melting began, acoustic streaming, the buoyancy of the remaining ice, and convective currents caused by an inner thermal gradient and thermocapillary effects along the air-liquid interface, all contributed to the droplet spinning about the horizontal axis.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Dynamic Viscosity of Methane and Carbon Dioxide Hydrate Systems from Pure Water at High-Pressure Driving Forces
Authors:
André Guerra,
Adam McElligott,
Chong-Yang Du,
Milan Marić,
Alejandro D. Rey,
Phillip Servio
Abstract:
The viscosity of methane and carbon dioxide hydrate systems were measured using a high-pressure rheometer up to 30 MPag. Where hydrate formation was not detected, the effect of temperature on the viscosity was one order of magnitude higher than the pressure effect on viscosity in most of the experimental pressure range (-0.048 mPa s/C at 1 MPag and 0.009 mPa s/MPag at 2C). The pressure effect on t…
▽ More
The viscosity of methane and carbon dioxide hydrate systems were measured using a high-pressure rheometer up to 30 MPag. Where hydrate formation was not detected, the effect of temperature on the viscosity was one order of magnitude higher than the pressure effect on viscosity in most of the experimental pressure range (-0.048 mPa s/C at 1 MPag and 0.009 mPa s/MPag at 2C). The pressure effect on the viscosity of carbon dioxide systems where no hydrate formation was observed was up to one order of magnitude higher than that of the methane systems, due to carbon dioxide's higher solubility in water. Novel rheological phases diagrams were developed to further characterize the gas hydrate systems. Several systems with high driving forces for hydrate formation (2.07 MPag to 4.1 MPag) did not form gas hydrates. System limitations to the formation of hydrates were categorized as kinetic, mass diffusion, and/or heat of crystallization effects.
△ Less
Submitted 4 January, 2023;
originally announced January 2023.
