Showing 1–40 of 40 results for author: McDonald, M

Repeated ancilla reuse for logical computation on a neutral atom quantum computer

Authors: J. A. Muniz, D. Crow, H. Kim, J. M. Kindem, W. B. Cairncross, A. Ryou, T. C. Bohdanowicz, C. -A. Chen, Y. Ji, A. M. W. Jones, E. Megidish, C. Nishiguchi, M. Urbanek, L. Wadleigh, T. Wilkason, D. Aasen, K. Barnes, J. M. Bello-Rivas, I. Bloomfield, G. Booth, A. Brown, M. O. Brown, K. Cassella, G. Cowan, J. Epstein , et al. (37 additional authors not shown)

Abstract: Quantum processors based on neutral atoms trapped in arrays of optical tweezers have appealing properties, including relatively easy qubit number scaling and the ability to engineer arbitrary gate connectivity with atom movement. However, these platforms are inherently prone to atom loss, and the ability to replace lost atoms during a quantum computation is an important but previously elusive capa… ▽ More Quantum processors based on neutral atoms trapped in arrays of optical tweezers have appealing properties, including relatively easy qubit number scaling and the ability to engineer arbitrary gate connectivity with atom movement. However, these platforms are inherently prone to atom loss, and the ability to replace lost atoms during a quantum computation is an important but previously elusive capability. Here, we demonstrate the ability to measure and re-initialize, and if necessary replace, a subset of atoms while maintaining coherence in other atoms. This allows us to perform logical circuits that include single and two-qubit gates as well as repeated midcircuit measurement while compensating for atom loss. We highlight this capability by performing up to 41 rounds of syndrome extraction in a repetition code, and combine midcircuit measurement and atom replacement with real-time conditional branching to demonstrate heralded state preparation of a logically encoded Bell state. Finally, we demonstrate the ability to replenish atoms in a tweezer array from an atomic beam while maintaining coherence of existing atoms -- a key step towards execution of logical computations that last longer than the lifetime of an atom in the system. △ Less

Submitted 11 June, 2025; originally announced June 2025.

Comments: 15 pages, 10 figures

Fault-tolerant quantum computation with a neutral atom processor

Authors: Ben W. Reichardt, Adam Paetznick, David Aasen, Ivan Basov, Juan M. Bello-Rivas, Parsa Bonderson, Rui Chao, Wim van Dam, Matthew B. Hastings, Ryan V. Mishmash, Andres Paz, Marcus P. da Silva, Aarthi Sundaram, Krysta M. Svore, Alexander Vaschillo, Zhenghan Wang, Matt Zanner, William B. Cairncross, Cheng-An Chen, Daniel Crow, Hyosub Kim, Jonathan M. Kindem, Jonathan King, Michael McDonald, Matthew A. Norcia , et al. (47 additional authors not shown)

Abstract: Quantum computing experiments are transitioning from running on physical qubits to using encoded, logical qubits. Fault-tolerant computation can identify and correct errors, and has the potential to enable the dramatically reduced logical error rates required for valuable algorithms. However, it requires flexible control of high-fidelity operations performed on large numbers of qubits. We demonstr… ▽ More Quantum computing experiments are transitioning from running on physical qubits to using encoded, logical qubits. Fault-tolerant computation can identify and correct errors, and has the potential to enable the dramatically reduced logical error rates required for valuable algorithms. However, it requires flexible control of high-fidelity operations performed on large numbers of qubits. We demonstrate fault-tolerant quantum computation on a quantum processor with 256 qubits, each an individual neutral Ytterbium atom. The operations are designed so that key error sources convert to atom loss, which can be detected by imaging. Full connectivity is enabled by atom movement. We demonstrate the entanglement of 24 logical qubits encoded into 48 atoms, at once catching errors and correcting for, on average 1.8, lost atoms. We also implement the Bernstein-Vazirani algorithm with up to 28 logical qubits encoded into 112 atoms, showing better-than-physical error rates. In both cases, "erasure conversion," changing errors into a form that can be detected independently from qubit state, improves circuit performance. These results begin to clear a path for achieving scientific quantum advantage with a programmable neutral atom quantum processor. △ Less

Submitted 9 June, 2025; v1 submitted 18 November, 2024; originally announced November 2024.

Comments: 14 pages, 17 figures

High-fidelity universal gates in the $^{171}$Yb ground state nuclear spin qubit

Authors: J. A. Muniz, M. Stone, D. T. Stack, M. Jaffe, J. M. Kindem, L. Wadleigh, E. Zalys-Geller, X. Zhang, C. -A. Chen, M. A. Norcia, J. Epstein, E. Halperin, F. Hummel, T. Wilkason, M. Li, K. Barnes, P. Battaglino, T. C. Bohdanowicz, G. Booth, A. Brown, M. O. Brown, W. B. Cairncross, K. Cassella, R. Coxe, D. Crow , et al. (28 additional authors not shown)

Abstract: Arrays of optically trapped neutral atoms are a promising architecture for the realization of quantum computers. In order to run increasingly complex algorithms, it is advantageous to demonstrate high-fidelity and flexible gates between long-lived and highly coherent qubit states. In this work, we demonstrate a universal high-fidelity gate-set with individually controlled and parallel application… ▽ More Arrays of optically trapped neutral atoms are a promising architecture for the realization of quantum computers. In order to run increasingly complex algorithms, it is advantageous to demonstrate high-fidelity and flexible gates between long-lived and highly coherent qubit states. In this work, we demonstrate a universal high-fidelity gate-set with individually controlled and parallel application of single-qubit gates and two-qubit gates operating on the ground-state nuclear spin qubit in arrays of tweezer-trapped $^{171}$Yb atoms. We utilize the long lifetime, flexible control, and high physical fidelity of our system to characterize native gates using single and two-qubit Clifford and symmetric subspace randomized benchmarking circuits with more than 200 CZ gates applied to one or two pairs of atoms. We measure our two-qubit entangling gate fidelity to be 99.72(3)% (99.40(3)%) with (without) post-selection. In addition, we introduce a simple and optimized method for calibration of multi-parameter quantum gates. These results represent important milestones towards executing complex and general quantum computation with neutral atoms. △ Less

Submitted 2 December, 2024; v1 submitted 18 November, 2024; originally announced November 2024.

Diffeomorphic Transformer-based Abdomen MRI-CT Deformable Image Registration

Authors: Yang Lei, Luke A. Matkovic, Justin Roper, Tonghe Wang, Jun Zhou, Beth Ghavidel, Mark McDonald, Pretesh Patel, Xiaofeng Yang

Abstract: This paper aims to create a deep learning framework that can estimate the deformation vector field (DVF) for directly registering abdominal MRI-CT images. The proposed method assumed a diffeomorphic deformation. By using topology-preserved deformation features extracted from the probabilistic diffeomorphic registration model, abdominal motion can be accurately obtained and utilized for DVF estimat… ▽ More This paper aims to create a deep learning framework that can estimate the deformation vector field (DVF) for directly registering abdominal MRI-CT images. The proposed method assumed a diffeomorphic deformation. By using topology-preserved deformation features extracted from the probabilistic diffeomorphic registration model, abdominal motion can be accurately obtained and utilized for DVF estimation. The model integrated Swin transformers, which have demonstrated superior performance in motion tracking, into the convolutional neural network (CNN) for deformation feature extraction. The model was optimized using a cross-modality image similarity loss and a surface matching loss. To compute the image loss, a modality-independent neighborhood descriptor (MIND) was used between the deformed MRI and CT images. The surface matching loss was determined by measuring the distance between the warped coordinates of the surfaces of contoured structures on the MRI and CT images. The deformed MRI image was assessed against the CT image using the target registration error (TRE), Dice similarity coefficient (DSC), and mean surface distance (MSD) between the deformed contours of the MRI image and manual contours of the CT image. When compared to only rigid registration, DIR with the proposed method resulted in an increase of the mean DSC values of the liver and portal vein from 0.850 and 0.628 to 0.903 and 0.763, a decrease of the mean MSD of the liver from 7.216 mm to 3.232 mm, and a decrease of the TRE from 26.238 mm to 8.492 mm. The proposed deformable image registration method based on a diffeomorphic transformer provides an effective and efficient way to generate an accurate DVF from an MRI-CT image pair of the abdomen. It could be utilized in the current treatment planning workflow for liver radiotherapy. △ Less

Submitted 4 May, 2024; originally announced May 2024.

Comments: 18 pages and 4 figures

IQMDose3D: a software tool for reconstructing the dose in patient using patient planning CT images and the signals measured by IQM detector

Authors: Aitang Xing, Gary Goozee, Alison Gray, Vaughan Moutrie, Sankar Arumugam, Shrikant Deshpande, Anthony Espinoza, Vasilis Kondilis, Marjorie McDonald, Philip Vial

Abstract: The integral quality monitor (IQM) system compares the signal measured with a large volume chamber mounted to the linear accelerator's head to the signal calculated using the patient DICOM RT plan for patient-specific quality assurance (PSQA). A method was developed to reconstruct the dose in patients using the signal measured by IQM chamber and patient planning CT images. A software tool named IQ… ▽ More The integral quality monitor (IQM) system compares the signal measured with a large volume chamber mounted to the linear accelerator's head to the signal calculated using the patient DICOM RT plan for patient-specific quality assurance (PSQA). A method was developed to reconstruct the dose in patients using the signal measured by IQM chamber and patient planning CT images. A software tool named IQMDose3D was implemented to automate this procedure and integrated into the IQM-based PSQA workflow. IQMDose3D enables the physicists to evaluate PSQA by focusing on the clinical perspective by comparing the delivered plan to the approved clinical plan in terms of the clinical goals, dose-volume histogram (DVH) in addition to the three-dimensional (3D) gamma map and gamma pass rate. △ Less

Submitted 29 March, 2024; v1 submitted 26 March, 2024; originally announced March 2024.

Comments: Accepted by ICCR 2024 conference

Iterative assembly of $^{171}$Yb atom arrays with cavity-enhanced optical lattices

Authors: M. A. Norcia, H. Kim, W. B. Cairncross, M. Stone, A. Ryou, M. Jaffe, M. O. Brown, K. Barnes, P. Battaglino, T. C. Bohdanowicz, A. Brown, K. Cassella, C. -A. Chen, R. Coxe, D. Crow, J. Epstein, C. Griger, E. Halperin, F. Hummel, A. M. W. Jones, J. M. Kindem, J. King, K. Kotru, J. Lauigan, M. Li , et al. (25 additional authors not shown)

Abstract: Assembling and maintaining large arrays of individually addressable atoms is a key requirement for continued scaling of neutral-atom-based quantum computers and simulators. In this work, we demonstrate a new paradigm for assembly of atomic arrays, based on a synergistic combination of optical tweezers and cavity-enhanced optical lattices, and the incremental filling of a target array from a repeti… ▽ More Assembling and maintaining large arrays of individually addressable atoms is a key requirement for continued scaling of neutral-atom-based quantum computers and simulators. In this work, we demonstrate a new paradigm for assembly of atomic arrays, based on a synergistic combination of optical tweezers and cavity-enhanced optical lattices, and the incremental filling of a target array from a repetitively filled reservoir. In this protocol, the tweezers provide microscopic rearrangement of atoms, while the cavity-enhanced lattices enable the creation of large numbers of optical traps with sufficient depth for rapid low-loss imaging of atoms. We apply this protocol to demonstrate near-deterministic filling (99% per-site occupancy) of 1225-site arrays of optical traps. Because the reservoir is repeatedly filled with fresh atoms, the array can be maintained in a filled state indefinitely. We anticipate that this protocol will be compatible with mid-circuit reloading of atoms into a quantum processor, which will be a key capability for running large-scale error-corrected quantum computations whose durations exceed the lifetime of a single atom in the system. △ Less

Submitted 18 June, 2024; v1 submitted 29 January, 2024; originally announced January 2024.

Comments: 8 pages, 6 figures

High-speed plasma measurements with a plasma impedance probe

Authors: John W. Brooks, Erik M. Tejero, Matthew C. Paliwoda, Michael S. McDonald

Abstract: Plasma impedance probes (PIPs) are a type of RF probe that primarily measure electron density. This work introduces two advancements: a streamlined analytical model for interpreting PIP-monopole measurements and techniques for achieving $\geq 1$ MHz time-resolved PIP measurements. The model's improvements include introducing sheath thickness as a measurement and providing a more accurate method fo… ▽ More Plasma impedance probes (PIPs) are a type of RF probe that primarily measure electron density. This work introduces two advancements: a streamlined analytical model for interpreting PIP-monopole measurements and techniques for achieving $\geq 1$ MHz time-resolved PIP measurements. The model's improvements include introducing sheath thickness as a measurement and providing a more accurate method for measuring electron density and damping. The model is validated by a quasi-static numerical simulation which compares the simulation with measurements, identifies sources of error, and provides probe design criteria for minimizing uncertainty. The improved time resolution is achieved by introducing higher-frequency hardware, updated analysis algorithms, and a more rigorous approach to RF calibration. Finally, the new model and high-speed techniques are applied to two datasets: a 4 kHz plasma density oscillation resolved at 100 kHz with densities ranging between $2 \times 10^{14}$ to $3 \times 10^{15}$ m$^{-3}$ and a 150 kHz oscillation resolved at 4 MHz with densities ranging between $4 \times 10^{14}$ to $6 \times 10^{14}$ m$^{-3}$. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Mid-circuit qubit measurement and rearrangement in a $^{171}$Yb atomic array

Authors: M. A. Norcia, W. B. Cairncross, K. Barnes, P. Battaglino, A. Brown, M. O. Brown, K. Cassella, C. -A. Chen, R. Coxe, D. Crow, J. Epstein, C. Griger, A. M. W. Jones, H. Kim, J. M. Kindem, J. King, S. S. Kondov, K. Kotru, J. Lauigan, M. Li, M. Lu, E. Megidish, J. Marjanovic, M. McDonald, T. Mittiga , et al. (20 additional authors not shown)

Abstract: Measurement-based quantum error correction relies on the ability to determine the state of a subset of qubits (ancillae) within a processor without revealing or disturbing the state of the remaining qubits. Among neutral-atom based platforms, a scalable, high-fidelity approach to mid-circuit measurement that retains the ancilla qubits in a state suitable for future operations has not yet been demo… ▽ More Measurement-based quantum error correction relies on the ability to determine the state of a subset of qubits (ancillae) within a processor without revealing or disturbing the state of the remaining qubits. Among neutral-atom based platforms, a scalable, high-fidelity approach to mid-circuit measurement that retains the ancilla qubits in a state suitable for future operations has not yet been demonstrated. In this work, we perform imaging using a narrow-linewidth transition in an array of tweezer-confined $^{171}$Yb atoms to demonstrate nondestructive state-selective and site-selective detection. By applying site-specific light shifts, selected atoms within the array can be hidden from imaging light, which allows a subset of qubits to be measured while causing only percent-level errors on the remaining qubits. As a proof-of-principle demonstration of conditional operations based on the results of the mid-circuit measurements, and of our ability to reuse ancilla qubits, we perform conditional refilling of ancilla sites to correct for occasional atom loss, while maintaining the coherence of data qubits. Looking towards true continuous operation, we demonstrate loading of a magneto-optical trap with a minimal degree of qubit decoherence. △ Less

Submitted 2 October, 2023; v1 submitted 30 May, 2023; originally announced May 2023.

Comments: 12 pages, 7 figures

More than magnetic isolation: Dynabeads as strong Raman reporters towards simultaneous capture and identification of targets

Authors: Jongwan Lee, Marissa McDonald, Nikiwe Mhlanga, Jeon Woong Kang, Rohit Karnik, Loza F. Tadesse

Abstract: Dynabeads are superparamagnetic particles used for immunomagnetic purification of cells and biomolecules. Post-capture, however, target identification relies on tedious culturing, fluorescence staining and/or target amplification. Raman spectroscopy presents a rapid detection alternative, but current implementations target cells themselves with weak Raman signals. We present antibody-coated Dynabe… ▽ More Dynabeads are superparamagnetic particles used for immunomagnetic purification of cells and biomolecules. Post-capture, however, target identification relies on tedious culturing, fluorescence staining and/or target amplification. Raman spectroscopy presents a rapid detection alternative, but current implementations target cells themselves with weak Raman signals. We present antibody-coated Dynabeads as strong Raman reporter labels whose effect can be considered a Raman parallel of immunofluorescent probes. Recent developments in techniques for separating target-bound Dynabeads from unbound Dynabeads makes such an implementation feasible. We deploy Dynabeads anti-Salmonella to bind and identify Salmonella enterica, a major foodborne pathogen. Dynabeads present signature peaks at 1000 and 1600 1/cm from aliphatic and aromatic C-C stretching of polystyrene, and 1350 1/cm and 1600 1/cm from amide, alpha-helix and beta-sheet of antibody coatings of the Fe2O3 core, confirmed with electron dispersive X-ray (EDX) imaging. Their Raman signature can be measured in dry and liquid samples even at single shot ~30 x 30-micrometer area imaging using 0.5 s, 7 mW laser acquisition with single and clustered beads providing a 44- and 68-fold larger Raman intensity compared to signature from cells. Higher polystyrene and antibody content in clusters yields to the larger signal intensity and conjugation to bacteria strengthens clustering as a bacterium can bind to more than one bead as observed via transmission electron microscopy (TEM). Our findings shed light on the intrinsic Raman reporter nature of Dynabeads, demonstrating their dual function for target isolation and detection without additional sample preparation, staining, or unique plasmonic substrate engineering, advancing their applications in heterogeneous samples like food, water, and blood. △ Less

Submitted 21 July, 2023; v1 submitted 11 May, 2023; originally announced May 2023.

Comments: 35 pages, 19 figures, submitted to the Journal of Raman Spectroscopy

A Retrospective Study on the Investigation of Potential Clinical Benefits of Online Adaptive Proton Therapy for Head and Neck Cancer

Authors: Chih-Wei Chang, Duncan Bohannon, Zhen Tian, Yinan Wang, Mark W. Mcdonald, David S. Yu, Tian Liu, Jun Zhou, Xiaofeng Yang

Abstract: Online adaptive proton therapy (APT) is an ideal solution theoretically, which however is challenging to proton clinics. Although multiple groups have been endeavoring to develop online APT technology, there is a concern in the radiotherapy community about the necessity of online APT because of its unknown impact on treatment outcomes. Hence, we have performed a retrospective study to investigate… ▽ More Online adaptive proton therapy (APT) is an ideal solution theoretically, which however is challenging to proton clinics. Although multiple groups have been endeavoring to develop online APT technology, there is a concern in the radiotherapy community about the necessity of online APT because of its unknown impact on treatment outcomes. Hence, we have performed a retrospective study to investigate the potential clinical effects of online APT for HN cancer patients in relative to the current offline APT via simulations. To mimic an online APT treatment course, we have recalculated and evaluated the actual dose of the current treatment plan on patient actual treatment anatomy captured by cone beam CT for each fraction. The cumulative dose of simulated online APT courses was compared to actual offline APT courses and the initially designed treatment plan dose. For patients 1 and 2, the simulated online ART course maintained a relatively higher CTV dose coverages than the offline ART course, particularly for CTV-Low, which led to an improvement of 2.66% and 4.52% in TCP of CTV-Low. For patients 3 and 4, with clinically comparable CTV dose coverages, the simulated online ART course achieved better OAR sparing than the offline ART course. The mean doses of right parotid and oral cavity were decreased from 29.52 Gy relative biological effectiveness (RBE) and 41.89 Gy RBE to 22.16 Gy RBE and 34.61 Gy RBE for patient 3, leading to a reduce of 1.67% and 3.40% in NTCP for the two organs. Compared to the current clinical practice, the retrospective study indicated that online APT tended to spare more normal tissues by achieving the clinical goal with merely half of the positional uncertainty margin. Future studies are needed to help identify the patients with large potential benefits prior to treatment to conserve scarce clinical resources. △ Less

Submitted 3 November, 2022; originally announced November 2022.

Journal ref: J Appl Clin Med Phys. 2024; 25:e14308

A comparison of Fourier and POD mode decomposition methods for high-speed Hall thruster video

Authors: J. W. Brooks, M. S. McDonald, A. A. Kaptanoglu

Abstract: Hall thrusters are susceptible to large-amplitude plasma oscillations that impact thruster performance and lifetime and are also difficult to model. High-speed cameras are a popular tool to study these dynamics due to their spatial resolution and are a popular, nonintrusive complement to in-situ probes. High-speed video of thruster oscillations can be isolated (decomposed) into coherent structures… ▽ More Hall thrusters are susceptible to large-amplitude plasma oscillations that impact thruster performance and lifetime and are also difficult to model. High-speed cameras are a popular tool to study these dynamics due to their spatial resolution and are a popular, nonintrusive complement to in-situ probes. High-speed video of thruster oscillations can be isolated (decomposed) into coherent structures (modes) with algorithms that help us better understand the evolution and interactions of each. This work provides an introduction, comparison, and step-by-step tutorial on established Fourier and newer Proper Orthogonal Decomposition (POD) algorithms as applied to high-speed video of the unshielded H6 6-kW laboratory model Hall thruster. From this dataset, both sets of algorithms identify and characterize $m=0$ and $m>0$ modes in the discharge channel and cathode regions of the thruster plume, as well as mode hopping between the $m=3$ and $m=4$ rotating spokes in the channel. The Fourier methods are ideal for characterizing linear modal structures and also provide intuitive dispersion relationships. By contrast, the POD method tailors a basis set using energy minimization techniques that better captures the nonlinear nature of these structures and with a simpler implementation. Together, the Fourier and POD methods provide a more complete toolkit for studying Hall thruster plasma instabilities and mode dynamics. Specifically, we recommend first applying POD first to quickly identify the nature and location of global dynamics and then using Fourier methods to isolate dispersion plots and other wave-based physics. △ Less

Submitted 27 May, 2022; originally announced May 2022.

Assembly and coherent control of a register of nuclear spin qubits

Authors: Katrina Barnes, Peter Battaglino, Benjamin J. Bloom, Kayleigh Cassella, Robin Coxe, Nicole Crisosto, Jonathan P. King, Stanimir S. Kondov, Krish Kotru, Stuart C. Larsen, Joseph Lauigan, Brian J. Lester, Mickey McDonald, Eli Megidish, Sandeep Narayanaswami, Ciro Nishiguchi, Remy Notermans, Lucas S. Peng, Albert Ryou, Tsung-Yao Wu, Michael Yarwood

Abstract: We introduce an optical tweezer platform for assembling and individually manipulating a two-dimensional register of nuclear spin qubits. Each nuclear spin qubit is encoded in the ground $^{1}S_{0}$ manifold of $^{87}$Sr and is individually manipulated by site-selective addressing beams. We observe that spin relaxation is negligible after 5 seconds, indicating that $T_1\gg5$ s. Furthermore, utilizi… ▽ More We introduce an optical tweezer platform for assembling and individually manipulating a two-dimensional register of nuclear spin qubits. Each nuclear spin qubit is encoded in the ground $^{1}S_{0}$ manifold of $^{87}$Sr and is individually manipulated by site-selective addressing beams. We observe that spin relaxation is negligible after 5 seconds, indicating that $T_1\gg5$ s. Furthermore, utilizing simultaneous manipulation of subsets of qubits, we demonstrate significant phase coherence over the entire register, estimating $T_2^\star = \left(21\pm7\right)$ s and measuring $T_2^\text{echo}=\left(42\pm6\right)$ s. △ Less

Submitted 10 August, 2021; originally announced August 2021.

Comments: 10 pages, 4 figures

Synthetic MRI-aided Head-and-Neck Organs-at-Risk Auto-Delineation for CBCT-guided Adaptive Radiotherapy

Authors: Xianjin Dai, Yang Lei, Tonghe Wang, Anees H. Dhabaan, Mark McDonald, Jonathan J. Beitler, Walter J. Curran, Jun Zhou, Tian Liu, Xiaofeng Yang

Abstract: Purpose: Organ-at-risk (OAR) delineation is a key step for cone-beam CT (CBCT) based adaptive radiotherapy planning that can be a time-consuming, labor-intensive, and subject-to-variability process. We aim to develop a fully automated approach aided by synthetic MRI for rapid and accurate CBCT multi-organ contouring in head-and-neck (HN) cancer patients. MRI has superb soft-tissue contrasts, while… ▽ More Purpose: Organ-at-risk (OAR) delineation is a key step for cone-beam CT (CBCT) based adaptive radiotherapy planning that can be a time-consuming, labor-intensive, and subject-to-variability process. We aim to develop a fully automated approach aided by synthetic MRI for rapid and accurate CBCT multi-organ contouring in head-and-neck (HN) cancer patients. MRI has superb soft-tissue contrasts, while CBCT offers bony-structure contrasts. Using the complementary information provided by MRI and CBCT is expected to enable accurate multi-organ segmentation in HN cancer patients. In our proposed method, MR images are firstly synthesized using a pre-trained cycle-consistent generative adversarial network given CBCT. The features of CBCT and synthetic MRI are then extracted using dual pyramid networks for final delineation of organs. CBCT images and their corresponding manual contours were used as pairs to train and test the proposed model. Quantitative metrics including Dice similarity coefficient (DSC) were used to evaluate the proposed method. The proposed method was evaluated on a cohort of 65 HN cancer patients. CBCT images were collected from those patients who received proton therapy. Overall, DSC values of 0.87, 0.79/0.79, 0.89/0.89, 0.90, 0.75/0.77, 0.86, 0.66, 0.78/0.77, 0.96, 0.89/0.89, 0.832, and 0.84 for commonly used OARs for treatment planning including brain stem, left/right cochlea, left/right eye, larynx, left/right lens, mandible, optic chiasm, left/right optic nerve, oral cavity, left/right parotid, pharynx, and spinal cord, respectively, were achieved. In this study, we developed a synthetic MRI-aided HN CBCT auto-segmentation method based on deep learning. It provides a rapid and accurate OAR auto-delineation approach, which can be used for adaptive radiation therapy. △ Less

Submitted 8 October, 2020; originally announced October 2020.

Learning-Based Synthetic Dual Energy CT Imaging from Single Energy CT for Stopping Power Ratio Calculation in Proton Radiation Therapy

Authors: Serdar Charyyev, Tonghe Wang, Yang Lei, Beth Ghavidel, Jonathan J. Beitler, Mark McDonald, Walter J. Curran, Tian Liu, Jun Zhou, Xiaofeng Yang

Abstract: Purpose: Dual-energy CT (DECT) has been shown to derive stopping power ratio (SPR) map with higher accuracy than conventional single energy CT (SECT) by obtaining the energy dependence of photon interactions. However, DECT is not as widely implemented as SECT in proton radiation therapy simulation. This work presents a learning-based method to synthetize DECT images from SECT for proton radiation… ▽ More Purpose: Dual-energy CT (DECT) has been shown to derive stopping power ratio (SPR) map with higher accuracy than conventional single energy CT (SECT) by obtaining the energy dependence of photon interactions. However, DECT is not as widely implemented as SECT in proton radiation therapy simulation. This work presents a learning-based method to synthetize DECT images from SECT for proton radiation therapy. Methods: The proposed method uses a residual attention generative adversarial network. Residual blocks with attention gates were used to force the model focus on the difference between DECT maps and SECT images. To evaluate the accuracy of the method, we retrospectively investigated 20 head-and-neck cancer patients with both DECT and SECT scans available. The high and low energy CT images acquired from DECT acted as learning targets in the training process for SECT datasets and were evaluated against results from the proposed method using a leave-one-out cross-validation strategy. To evaluate our method in the context of a practical application, we generated SPR maps from sDECT using physics-based dual-energy stoichiometric method and compared the maps to those generated from DECT. Results: The synthesized DECT images showed an average mean absolute error around 30 Hounsfield Unit (HU) across the whole-body volume. The corresponding SPR maps generated from synthetic DECT showed an average normalized mean square error of about 1% with reduced noise level and artifacts than those from original DECT. Conclusions: The accuracy of the synthesized DECT image by our machine-learning-based method was evaluated on head and neck patient, and potential feasibility for proton treatment planning and dose calculation was shown by generating SPR map using the synthesized DECT. △ Less

Submitted 25 May, 2020; originally announced May 2020.

Comments: arXiv admin note: text overlap with arXiv:2003.09058

Learning-Based Stopping Power Mapping on Dual Energy CT for Proton Radiation Therapy

Authors: Tonghe Wang, Yang Lei, Joseph Harms, Beth Ghavidel, Liyong Lin, Jonathan J. Beitler, Mark McDonald, Walter J. Curran, Tian Liu, Jun Zhou, Xiaofeng Yang

Abstract: Purpose: Dual-energy CT (DECT) has been used to derive relative stopping power (RSP) map by obtaining the energy dependence of photon interactions. The DECT-derived RSP maps could potentially be compromised by image noise levels and the severity of artifacts when using physics-based mapping techniques, which would affect subsequent clinical applications. This work presents a noise-robust learning-… ▽ More Purpose: Dual-energy CT (DECT) has been used to derive relative stopping power (RSP) map by obtaining the energy dependence of photon interactions. The DECT-derived RSP maps could potentially be compromised by image noise levels and the severity of artifacts when using physics-based mapping techniques, which would affect subsequent clinical applications. This work presents a noise-robust learning-based method to predict RSP maps from DECT for proton radiation therapy. Methods: The proposed method uses a residual attention cycle-consistent generative adversarial (CycleGAN) network. CycleGAN were used to let the DECT-to-RSP mapping be close to a one-to-one mapping by introducing an inverse RSP-to-DECT mapping. We retrospectively investigated 20 head-and-neck cancer patients with DECT scans in proton radiation therapy simulation. Ground truth RSP values were assigned by calculation based on chemical compositions, and acted as learning targets in the training process for DECT datasets, and were evaluated against results from the proposed method using a leave-one-out cross-validation strategy. Results: The predicted RSP maps showed an average normalized mean square error (NMSE) of 2.83% across the whole body volume, and average mean error (ME) less than 3% in all volumes of interest (VOIs). With additional simulated noise added in DECT datasets, the proposed method still maintained a comparable performance, while the physics-based stoichiometric method suffered degraded inaccuracy from increased noise level. The average differences in DVH metrics for clinical target volumes (CTVs) were less than 0.2 Gy for D95% and Dmax with no statistical significance. Conclusion: These results strongly indicate the high accuracy of RSP maps predicted by our machine-learning-based method and show its potential feasibility for proton treatment planning and dose calculation. △ Less

Submitted 19 March, 2020; originally announced March 2020.

Super-resolution microscopy of cold atoms in an optical lattice

Authors: Mickey McDonald, Jonathan Trisnadi, Kai-Xuan Yao, Cheng Chin

Abstract: Super-resolution microscopy has revolutionized the fields of chemistry and biology by resolving features at the molecular level. Such techniques can be either "stochastic," gaining resolution through precise localization of point source emitters, or "deterministic," leveraging the nonlinear optical response of a sample to improve resolution. In atomic physics, deterministic methods can be applied… ▽ More Super-resolution microscopy has revolutionized the fields of chemistry and biology by resolving features at the molecular level. Such techniques can be either "stochastic," gaining resolution through precise localization of point source emitters, or "deterministic," leveraging the nonlinear optical response of a sample to improve resolution. In atomic physics, deterministic methods can be applied to reveal the atomic wavefunction and to perform quantum control. Here we demonstrate super-resolution imaging based on nonlinear response of atoms to an optical pumping pulse. With this technique the atomic density distribution can be resolved with a point spread function FWHM of 32(4) nm and a localization precision below 1 nm. The short optical pumping pulse of 1.4 $μ$s enables us to resolve fast atomic dynamics within a single lattice site. A byproduct of our scheme is the emergence of moiré patterns on the atomic cloud, which we show to be immensely magnified images of the atomic density in the lattice. Our work represents a general approach to accessing the physics of cold atoms at the nanometer scale, and can be extended to higher dimensional lattices and bulk systems for a variety of atomic and molecular species. △ Less

Submitted 8 July, 2018; originally announced July 2018.

Journal ref: Phys. Rev. X 9, 021001 (2019)

Experimental and Theoretical Investigation of the Crossover from the Ultracold to the Quasiclassical Regime of Photodissociation

Authors: I. Majewska, S. S. Kondov, C. -H. Lee, M. McDonald, B. H. McGuyer, R. Moszynski, T. Zelevinsky

Abstract: At ultralow energies, atoms and molecules undergo collisions and reactions that are best described in terms of quantum mechanical wave functions. In contrast, at higher energies these processes can be understood quasiclassically. Here, we investigate the crossover from the quantum mechanical to the quasiclassical regime both experimentally and theoretically for photodissociation of ultracold diato… ▽ More At ultralow energies, atoms and molecules undergo collisions and reactions that are best described in terms of quantum mechanical wave functions. In contrast, at higher energies these processes can be understood quasiclassically. Here, we investigate the crossover from the quantum mechanical to the quasiclassical regime both experimentally and theoretically for photodissociation of ultracold diatomic strontium molecules. This basic reaction is carried out with a full control of quantum states for the molecules and their photofragments. The photofragment angular distributions are imaged, and calculated using a quantum mechanical model as well as the WKB and a semiclassical approximation that are explicitly compared across a range of photofragment energies. The reaction process is shown to converge to its high-energy (axial recoil) limit when the energy exceeds the height of any reaction barriers. This phenomenon is quantitatively investigated for two-channel photodissociation using intuitive parameters for the channel amplitude and phase. While the axial recoil limit is generally found to be well described by a commonly used quasiclassical model, we find that when the photofragments are identical particles, their bosonic or fermionic quantum statistics can cause this model to fail, requiring a quantum mechanical treatment even at high energies. △ Less

Submitted 23 May, 2018; originally announced May 2018.

Comments: 13 pages, 6 figures

Journal ref: Phys. Rev. A 98, 043404 (2018)

Crossover from the Ultracold to the Quasiclassical Regime in State-Selected Photodissociation

Authors: S. S. Kondov, C. -H. Lee, M. McDonald, B. H. McGuyer, I. Majewska, R. Moszynski, T. Zelevinsky

Abstract: Processes that break molecular bonds are typically observed with molecules occupying a mixture of quantum states and successfully described with quasiclassical models, while a few studies have explored the distinctly quantum mechanical low-energy regime. Here we use photodissociation of diatomic strontium molecules to demonstrate the crossover from the ultracold, quantum regime where the photofrag… ▽ More Processes that break molecular bonds are typically observed with molecules occupying a mixture of quantum states and successfully described with quasiclassical models, while a few studies have explored the distinctly quantum mechanical low-energy regime. Here we use photodissociation of diatomic strontium molecules to demonstrate the crossover from the ultracold, quantum regime where the photofragment angular distributions strongly depend on the kinetic energy, to the energy-independent quasiclassical regime. Using time-of-flight velocity map imaging for photodissociation channels with millikelvin reaction barriers, we explore photofragment energies in the 0.1-300 mK range experimentally and up to 3 K theoretically, and discuss the energy scale at which the crossover occurs. Furthermore, we find that the effects of quantum statistics can unexpectedly persist to high photodissociation energies. △ Less

Submitted 22 May, 2018; originally announced May 2018.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. Lett. 121, 143401 (2018)

Shaken Snow Globes: Kinematic Tracers of the Multiphase Condensation Cascade in Massive Galaxies, Groups, and Clusters

Authors: M. Gaspari, M. McDonald, S. L. Hamer, F. Brighenti, P. Temi, M. Gendron-Marsolais, J. Hlavacek-Larrondo, A. C. Edge, N. Werner, P. Tozzi, M. Sun, J. M. Stone, G. R. Tremblay, M. T. Hogan, D. Eckert, S. Ettori, H. Yu, V. Biffi, S. Planelles

Abstract: We propose a novel method to constrain turbulence and bulk motions in massive galaxies, groups and clusters, exploring both simulations and observations. As emerged in the recent picture of the top-down multiphase condensation, the hot gaseous halos are tightly linked to all other phases in terms of cospatiality and thermodynamics. While hot halos (10^7 K) are perturbed by subsonic turbulence, war… ▽ More We propose a novel method to constrain turbulence and bulk motions in massive galaxies, groups and clusters, exploring both simulations and observations. As emerged in the recent picture of the top-down multiphase condensation, the hot gaseous halos are tightly linked to all other phases in terms of cospatiality and thermodynamics. While hot halos (10^7 K) are perturbed by subsonic turbulence, warm (10^4 K) ionized and neutral filaments condense out of the turbulent eddies. The peaks condense into cold molecular clouds (< 100 K) raining in the core via chaotic cold accretion (CCA). We show all phases are tightly linked via the ensemble (wide-aperture) velocity dispersion along the line of sight. The correlation arises in complementary long-term AGN feedback simulations and high-resolution CCA runs, and is corroborated by the combined Hitomi and new IFU measurements in Perseus cluster. The ensemble multiphase gas distributions are characterized by substantial spectral line broadening (100-200 km/s) with mild line shift. On the other hand, pencil-beam detections sample the small-scale clouds displaying smaller broadening and significant line shift up to several 100 km/s, with increased scatter due to the turbulence intermittency. We present new ensemble sigma_v of the warm Halpha+[NII] gas in 72 observed cluster/group cores: the constraints are consistent with the simulations and can be used as robust proxies for the turbulent velocities, in particular for the challenging hot plasma (otherwise requiring extremely long X-ray exposures). We show the physically motivated criterion C = t_cool/t_eddy ~ 1 best traces the condensation extent region and presence of multiphase gas in observed clusters/groups. The ensemble method can be applied to many available datasets and can substantially advance our understanding of multiphase halos in light of the next-generation multiwavelength missions. △ Less

Submitted 9 February, 2018; v1 submitted 19 September, 2017; originally announced September 2017.

Comments: 18 pages, 5 figures, 2 tables; ApJ in press - typos corrected, formatting improved (new emulateapj mod included here)

Control of Ultracold Photodissociation with Magnetic Fields

Authors: M. McDonald, I. Majewska, C. -H. Lee, S. S. Kondov, B. H. McGuyer, R. Moszynski, T. Zelevinsky

Abstract: Photodissociation of a molecule produces a spatial distribution of photofragments determined by the molecular structure and the characteristics of the dissociating light. Performing this basic chemical reaction at ultracold temperatures allows its quantum mechanical features to dominate. In this regime, weak applied fields can be used to control the reaction. Here, we photodissociate ultracold dia… ▽ More Photodissociation of a molecule produces a spatial distribution of photofragments determined by the molecular structure and the characteristics of the dissociating light. Performing this basic chemical reaction at ultracold temperatures allows its quantum mechanical features to dominate. In this regime, weak applied fields can be used to control the reaction. Here, we photodissociate ultracold diatomic strontium in magnetic fields below 10 G and observe striking changes in photofragment angular distributions. The observations are in excellent qualitative agreement with a multichannel quantum chemistry model that includes nonadiabatic effects and predicts strong mixing of partial waves in the photofragment energy continuum. The experiment is enabled by precise quantum-state control of the molecules. △ Less

Submitted 13 September, 2017; originally announced September 2017.

Comments: 8 pages, 3 figures

Journal ref: Phys. Rev. Lett. 120, 033201 (2018)

A novel comparison of Møller and Compton electron-beam polarimeters

Authors: J. A. Magee, A. Narayan, D. Jones, R. Beminiwattha, J. C. Cornejo, M. M. Dalton, W. Deconinck, D. Dutta, D. Gaskell, J. W. Martin, K. D. Paschke, V. Tvaskis, A. Asaturyan, J. Benesch, G. Cates, B. S. Cavness, L. A. Dillon-Townes, G. Hays, J. Hoskins, E. Ihloff, R. Jones, P. M. King, S. Kowalski, L. Kurchaninov, L. Lee , et al. (16 additional authors not shown)

Abstract: We have performed a novel comparison between electron-beam polarimeters based on Møller and Compton scattering. A sequence of electron-beam polarization measurements were performed at low beam currents ($<$ 5 $μ$A) during the $Q_{\rm weak}$ experiment in Hall C at Jefferson Lab. These low current measurements were bracketed by the regular high current (180 $μ$A) operation of the Compton polarimete… ▽ More We have performed a novel comparison between electron-beam polarimeters based on Møller and Compton scattering. A sequence of electron-beam polarization measurements were performed at low beam currents ($<$ 5 $μ$A) during the $Q_{\rm weak}$ experiment in Hall C at Jefferson Lab. These low current measurements were bracketed by the regular high current (180 $μ$A) operation of the Compton polarimeter. All measurements were found to be consistent within experimental uncertainties of 1% or less, demonstrating that electron polarization does not depend significantly on the beam current. This result lends confidence to the common practice of applying Møller measurements made at low beam currents to physics experiments performed at higher beam currents. The agreement between two polarimetry techniques based on independent physical processes sets an important benchmark for future precision asymmetry measurements that require sub-1% precision in polarimetry. △ Less

Submitted 25 January, 2017; v1 submitted 19 October, 2016; originally announced October 2016.

Photodissociation of ultracold diatomic strontium molecules with quantum state control

Authors: M. McDonald, B. H. McGuyer, F. Apfelbeck, C. -H. Lee, I. Majewska, R. Moszynski, T. Zelevinsky

Abstract: Chemical reactions at ultracold temperatures are expected to be dominated by quantum mechanical effects. Although progress towards ultracold chemistry has been made through atomic photoassociation, Feshbach resonances and bimolecular collisions, these approaches have been limited by imperfect quantum state selectivity. In particular, attaining complete control of the ground or excited continuum qu… ▽ More Chemical reactions at ultracold temperatures are expected to be dominated by quantum mechanical effects. Although progress towards ultracold chemistry has been made through atomic photoassociation, Feshbach resonances and bimolecular collisions, these approaches have been limited by imperfect quantum state selectivity. In particular, attaining complete control of the ground or excited continuum quantum states has remained a challenge. Here we achieve this control using photodissociation, an approach that encodes a wealth of information in the angular distribution of outgoing fragments. By photodissociating ultracold 88Sr2 molecules with full control of the low-energy continuum, we access the quantum regime of ultracold chemistry, observing resonant and nonresonant barrier tunneling, matter-wave interference of reaction products and forbidden reaction pathways. Our results illustrate the failure of the traditional quasiclassical model of photodissociation and instead are accurately described by a quantum mechanical model. The experimental ability to produce well-defined quantum continuum states at low energies will enable high-precision studies of long-range molecular potentials for which accurate quantum chemistry models are unavailable, and may serve as a source of entangled states and coherent matter waves for a wide range of experiments in quantum optics. △ Less

Submitted 16 March, 2017; v1 submitted 21 December, 2015; originally announced December 2015.

Journal ref: Nature 535 (2016) 122-126

Precision Electron-Beam Polarimetry using Compton Scattering at 1 GeV

Authors: A. Narayan, D. Jones, J. C. Cornejo, M. M. Dalton, W. Deconinck, D. Dutta, D. Gaskell, J. W. Martin, K. D. Paschke, V. Tvaskis, A. Asaturyan, J. Benesch, G. Cates, B. S. Cavness, L. A. Dillon-Townes, G. Hays, E. Ihloff, R. Jones, S. Kowalski, L. Kurchaninov, L. Lee, A. McCreary, M. McDonald, A. Micherdzinska, A. Mkrtchyan , et al. (11 additional authors not shown)

Abstract: We report on the highest precision yet achieved in the measurement of the polarization of a low energy, $\mathcal{O}$(1 GeV), electron beam, accomplished using a new polarimeter based on electron-photon scattering, in Hall~C at Jefferson Lab. A number of technical innovations were necessary, including a novel method for precise control of the laser polarization in a cavity and a novel diamond micr… ▽ More We report on the highest precision yet achieved in the measurement of the polarization of a low energy, $\mathcal{O}$(1 GeV), electron beam, accomplished using a new polarimeter based on electron-photon scattering, in Hall~C at Jefferson Lab. A number of technical innovations were necessary, including a novel method for precise control of the laser polarization in a cavity and a novel diamond micro-strip detector which was able to capture most of the spectrum of scattered electrons. The data analysis technique exploited track finding, the high granularity of the detector and its large acceptance. The polarization of the $180~μ$A, $1.16$~GeV electron beam was measured with a statistical precision of $<$~1\% per hour and a systematic uncertainty of 0.59\%. This exceeds the level of precision required by the \qweak experiment, a measurement of the vector weak charge of the proton. Proposed future low-energy experiments require polarization uncertainty $<$~0.4\%, and this result represents an important demonstration of that possibility. This measurement is also the first use of diamond detectors for particle tracking in an experiment. △ Less

Submitted 17 February, 2016; v1 submitted 22 September, 2015; originally announced September 2015.

Comments: 9 pages, 7 figures, published in PRX

Journal ref: Phys. Rev. X 6, 011013 (2016)

Control of Optical Transitions with Magnetic Fields in Weakly Bound Molecules

Authors: B. H. McGuyer, M. McDonald, G. Z. Iwata, W. Skomorowski, R. Moszynski, T. Zelevinsky

Abstract: In weakly bound diatomic molecules, energy levels are closely spaced and thus more susceptible to mixing by magnetic fields than in the constituent atoms. We use this effect to control the strengths of forbidden optical transitions in $^{88}$Sr$_2$ over 5 orders of magnitude with modest fields by taking advantage of the intercombination-line threshold. The physics behind this remarkable tunability… ▽ More In weakly bound diatomic molecules, energy levels are closely spaced and thus more susceptible to mixing by magnetic fields than in the constituent atoms. We use this effect to control the strengths of forbidden optical transitions in $^{88}$Sr$_2$ over 5 orders of magnitude with modest fields by taking advantage of the intercombination-line threshold. The physics behind this remarkable tunability is accurately explained with both a simple model and quantum chemistry calculations, and suggests new possibilities for molecular clocks. We show how mixed quantization in an optical lattice can simplify molecular spectroscopy. Furthermore, our observation of formerly inaccessible $f$-parity excited states offers an avenue for improving theoretical models of divalent-atom dimers. △ Less

Submitted 21 December, 2015; v1 submitted 19 March, 2015; originally announced March 2015.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. Lett. 115, 053001 (2015)

High-precision spectroscopy of ultracold molecules in an optical lattice

Authors: B. H. McGuyer, M. McDonald, G. Z. Iwata, M. G. Tarallo, A. T. Grier, F. Apfelbeck, T. Zelevinsky

Abstract: The study of ultracold molecules tightly trapped in an optical lattice can expand the frontier of precision measurement and spectroscopy, and provide a deeper insight into molecular and fundamental physics. Here we create, probe, and image microkelvin $^{88}$Sr$_2$ molecules in a lattice, and demonstrate precise measurements of molecular parameters as well as coherent control of molecular quantum… ▽ More The study of ultracold molecules tightly trapped in an optical lattice can expand the frontier of precision measurement and spectroscopy, and provide a deeper insight into molecular and fundamental physics. Here we create, probe, and image microkelvin $^{88}$Sr$_2$ molecules in a lattice, and demonstrate precise measurements of molecular parameters as well as coherent control of molecular quantum states using optical fields. We discuss the sensitivity of the system to dimensional effects, a new bound-to-continuum spectroscopy technique for highly accurate binding energy measurements, and prospects for new physics with this rich experimental system. △ Less

Submitted 21 December, 2015; v1 submitted 6 January, 2015; originally announced January 2015.

Comments: 12 pages, 4 figures

Journal ref: New J. Phys. 17, 055004 (2015)

Community detection in temporal multilayer networks, with an application to correlation networks

Authors: Marya Bazzi, Mason A. Porter, Stacy Williams, Mark McDonald, Daniel J. Fenn, Sam D. Howison

Abstract: Networks are a convenient way to represent complex systems of interacting entities. Many networks contain "communities" of nodes that are more densely connected to each other than to nodes in the rest of the network. In this paper, we investigate the detection of communities in temporal networks represented as multilayer networks. As a focal example, we study time-dependent financial-asset correla… ▽ More Networks are a convenient way to represent complex systems of interacting entities. Many networks contain "communities" of nodes that are more densely connected to each other than to nodes in the rest of the network. In this paper, we investigate the detection of communities in temporal networks represented as multilayer networks. As a focal example, we study time-dependent financial-asset correlation networks. We first argue that the use of the "modularity" quality function---which is defined by comparing edge weights in an observed network to expected edge weights in a "null network"---is application-dependent. We differentiate between "null networks" and "null models" in our discussion of modularity maximization, and we highlight that the same null network can correspond to different null models. We then investigate a multilayer modularity-maximization problem to identify communities in temporal networks. Our multilayer analysis only depends on the form of the maximization problem and not on the specific quality function that one chooses. We introduce a diagnostic to measure \emph{persistence} of community structure in a multilayer network partition. We prove several results that describe how the multilayer maximization problem measures a trade-off between static community structure within layers and larger values of persistence across layers. We also discuss some computational issues that the popular "Louvain" heuristic faces with temporal multilayer networks and suggest ways to mitigate them. △ Less

Submitted 24 December, 2017; v1 submitted 30 December, 2014; originally announced January 2015.

Comments: 42 pages, many figures, final accepted version before typesetting

Journal ref: Multiscale Modeling and Simulation: A SIAM Interdisciplinary Journal, Vol. 14, No. 1: 1--41 (2016)

The Q_weak Experimental Apparatus

Authors: Qweak Collaboration, T. Allison, M. Anderson, D. Androic, D. S. Armstrong, A. Asaturyan, T. D. Averett, R. Averill, J. Balewski, J. Beaufait, R. S. Beminiwattha, J. Benesch, F. Benmokhtar, J. Bessuille, J. Birchall, E. Bonnell, J. Bowman, P. Brindza, D. B. Brown, R. D. Carlini, G. D. Cates, B. Cavness, G. Clark, J. C. Cornejo, S. Covrig Dusa , et al. (104 additional authors not shown)

Abstract: The Jefferson Lab Q_weak experiment determined the weak charge of the proton by measuring the parity-violating elastic scattering asymmetry of longitudinally polarized electrons from an unpolarized liquid hydrogen target at small momentum transfer. A custom apparatus was designed for this experiment to meet the technical challenges presented by the smallest and most precise ${\vec{e}}$p asymmetry… ▽ More The Jefferson Lab Q_weak experiment determined the weak charge of the proton by measuring the parity-violating elastic scattering asymmetry of longitudinally polarized electrons from an unpolarized liquid hydrogen target at small momentum transfer. A custom apparatus was designed for this experiment to meet the technical challenges presented by the smallest and most precise ${\vec{e}}$p asymmetry ever measured. Technical milestones were achieved at Jefferson Lab in target power, beam current, beam helicity reversal rate, polarimetry, detected rates, and control of helicity-correlated beam properties. The experiment employed 180 microA of 89% longitudinally polarized electrons whose helicity was reversed 960 times per second. The electrons were accelerated to 1.16 GeV and directed to a beamline with extensive instrumentation to measure helicity-correlated beam properties that can induce false asymmetries. Moller and Compton polarimetry were used to measure the electron beam polarization to better than 1%. The electron beam was incident on a 34.4 cm liquid hydrogen target. After passing through a triple collimator system, scattered electrons between 5.8 degrees and 11.6 degrees were bent in the toroidal magnetic field of a resistive copper-coil magnet. The electrons inside this acceptance were focused onto eight fused silica Cerenkov detectors arrayed symmetrically around the beam axis. A total scattered electron rate of about 7 GHz was incident on the detector array. The detectors were read out in integrating mode by custom-built low-noise pre-amplifiers and 18-bit sampling ADC modules. The momentum transfer Q^2 = 0.025 GeV^2 was determined using dedicated low-current (~100 pA) measurements with a set of drift chambers before (and a set of drift chambers and trigger scintillation counters after) the toroidal magnet. △ Less

Submitted 6 January, 2015; v1 submitted 24 September, 2014; originally announced September 2014.

Comments: 48 pages, 36 figures. Accepted by Nuclear Instruments and Methods A

Report number: JLab-PHY-14-1959

Thermometry via Light Shifts in Optical Lattices

Authors: Mickey McDonald, Bart H. McGuyer, Geoffrey Z. Iwata, Tanya Zelevinsky

Abstract: For atoms or molecules in optical lattices, conventional thermometry methods are often unsuitable due to low particle numbers or a lack of cycling transitions. However, a differential spectroscopic light shift can map temperature onto the line shape with a low sensitivity to trap anharmonicity. We study narrow molecular transitions to demonstrate precise frequency-based lattice thermometry, as wel… ▽ More For atoms or molecules in optical lattices, conventional thermometry methods are often unsuitable due to low particle numbers or a lack of cycling transitions. However, a differential spectroscopic light shift can map temperature onto the line shape with a low sensitivity to trap anharmonicity. We study narrow molecular transitions to demonstrate precise frequency-based lattice thermometry, as well as carrier cooling. This approach should be applicable down to nanokelvin temperatures. We also discuss how the thermal light shift can affect the accuracy of optical lattice clocks. △ Less

Submitted 2 March, 2015; v1 submitted 19 September, 2014; originally announced September 2014.

Comments: 7 pages, 4 figures. Final version

Journal ref: Phys. Rev. Lett. 114, 023001 (2015)

Visible optical beats at the hertz level

Authors: Mickey McDonald, Jiyoun Ha, Bart H. McGuyer, Tanya Zelevinsky

Abstract: We present a lecture demonstration which produces a visible, beating interference pattern that is the optical analog of demonstrations which produce audible, beating sound-wave interference. The setup is a compact, portable Mach-Zehnder interferometer made of optical components commonly found in laser physics labs. This apparatus may also be built and used in advanced laboratory courses to illustr… ▽ More We present a lecture demonstration which produces a visible, beating interference pattern that is the optical analog of demonstrations which produce audible, beating sound-wave interference. The setup is a compact, portable Mach-Zehnder interferometer made of optical components commonly found in laser physics labs. This apparatus may also be built and used in advanced laboratory courses to illustrate concepts in interferometry and laser light modulation. △ Less

Submitted 8 September, 2014; originally announced September 2014.

Comments: 6 pages, 2 figures, accepted for publication in the American Journal of Physics

Journal ref: American Journal of Physics 82, 1003 (2014)

Precise study of asymptotic physics with subradiant ultracold molecules

Authors: B. H. McGuyer, M. McDonald, G. Z. Iwata, M. G. Tarallo, W. Skomorowski, R. Moszynski, T. Zelevinsky

Abstract: Weakly bound molecules have physical properties without atomic analogues, even as the bond length approaches dissociation. In particular, the internal symmetries of homonuclear diatomic molecules result in formation of two-body superradiant and subradiant excited states. While superradiance has been demonstrated in a variety of systems, subradiance is more elusive due to the inherently weak intera… ▽ More Weakly bound molecules have physical properties without atomic analogues, even as the bond length approaches dissociation. In particular, the internal symmetries of homonuclear diatomic molecules result in formation of two-body superradiant and subradiant excited states. While superradiance has been demonstrated in a variety of systems, subradiance is more elusive due to the inherently weak interaction with the environment. Here we characterize the properties of deeply subradiant molecular states with intrinsic quality factors exceeding $10^{13}$ via precise optical spectroscopy with the longest molecule-light coherent interaction times to date. We find that two competing effects limit the lifetimes of the subradiant molecules, with different asymptotic behaviors. The first is radiative decay via weak magnetic-dipole and electric-quadrupole interactions. We prove that its rate increases quadratically with the bond length, confirming quantum mechanical predictions. The second is nonradiative decay through weak gyroscopic predissociation, with a rate proportional to the vibrational mode spacing and sensitive to short-range physics. This work bridges the gap between atomic and molecular metrology based on lattice-clock techniques, yielding new understanding of long-range interatomic interactions and placing ultracold molecules at the forefront of precision measurements. △ Less

Submitted 21 December, 2015; v1 submitted 17 July, 2014; originally announced July 2014.

Comments: 12 pages, 6 figures

Journal ref: Nature Physics 11, 32 (2015)

Nonadiabatic Effects in Ultracold Molecules via Anomalous Linear and Quadratic Zeeman Shifts

Authors: B. H. McGuyer, C. B. Osborn, M. McDonald, G. Reinaudi, W. Skomorowski, R. Moszynski, T. Zelevinsky

Abstract: Anomalously large linear and quadratic Zeeman shifts are measured for weakly bound ultracold $^{88}$Sr$_2$ molecules near the intercombination-line asymptote. Nonadiabatic Coriolis coupling and the nature of long-range molecular potentials explain how this effect arises and scales roughly cubically with the size of the molecule. The linear shifts yield nonadiabatic mixing angles of the molecular s… ▽ More Anomalously large linear and quadratic Zeeman shifts are measured for weakly bound ultracold $^{88}$Sr$_2$ molecules near the intercombination-line asymptote. Nonadiabatic Coriolis coupling and the nature of long-range molecular potentials explain how this effect arises and scales roughly cubically with the size of the molecule. The linear shifts yield nonadiabatic mixing angles of the molecular states. The quadratic shifts are sensitive to nearby opposite $f$-parity states and exhibit fourth-order corrections, providing a stringent test of a state-of-the-art \textit{ab initio} model. △ Less

Submitted 20 December, 2013; v1 submitted 17 July, 2013; originally announced July 2013.

Comments: 5 pages, 3 figures, 1 table

Journal ref: Phys. Rev. Lett. 111, 243003 (2013)

Feedback and harmonic locking of slot-type optomechanical oscillators to external low-noise reference clocks

Authors: Jiangjun Zheng, Ying Li, Noam Goldberg, Mickey McDonald, Xingsheng Luan, Archita Hati, Ming Lu, Stefan Strauf, Tanya Zelevinsky, David A. Howe, Chee Wei Wong

Abstract: We demonstrate feedback and harmonic locking of chip-scale slot-type optomechanical oscillators to external low-noise reference clocks, with suppressed timing jitter by three orders of magnitude. The feedback and compensation techniques significantly reduce the close-to-carrier phase noise, especially within the locking bandwidth for the integral root-mean-square timing jitter. Harmonic locking vi… ▽ More We demonstrate feedback and harmonic locking of chip-scale slot-type optomechanical oscillators to external low-noise reference clocks, with suppressed timing jitter by three orders of magnitude. The feedback and compensation techniques significantly reduce the close-to-carrier phase noise, especially within the locking bandwidth for the integral root-mean-square timing jitter. Harmonic locking via high-order carrier signals is also demonstrated with similar phase noise and integrated root-mean-square timing jitter reduction. The chip-scale optomechanical oscillators are tunable over an 80-kHz range by tracking the reference clock, with potential applications in tunable radio-frequency photonics platforms. △ Less

Submitted 8 March, 2013; originally announced March 2013.

Optical Production of Stable Ultracold $^{88}$Sr$_2$ Molecules

Authors: G. Reinaudi, C. B. Osborn, M. McDonald, S. Kotochigova, T. Zelevinsky

Abstract: We have produced large samples of ultracold $^{88}$Sr$_2$ molecules in the electronic ground state in an optical lattice. The molecules are bound by 0.05 cm$^{-1}$ and are stable for several milliseconds. The fast, all-optical method of molecule creation via intercombination line photoassociation relies on a near-unity Franck-Condon factor. The detection uses a weakly bound vibrational level corre… ▽ More We have produced large samples of ultracold $^{88}$Sr$_2$ molecules in the electronic ground state in an optical lattice. The molecules are bound by 0.05 cm$^{-1}$ and are stable for several milliseconds. The fast, all-optical method of molecule creation via intercombination line photoassociation relies on a near-unity Franck-Condon factor. The detection uses a weakly bound vibrational level corresponding to a very large dimer. This is the first of two steps needed to create Sr$_2$ in the absolute ground quantum state. Lattice-trapped Sr$_2$ is of interest to frequency metrology and ultracold chemistry. △ Less

Submitted 22 September, 2012; v1 submitted 2 June, 2012; originally announced June 2012.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Lett. 109, 115303 (2012)

Limit Order Books

Authors: Martin D. Gould, Mason A. Porter, Stacy Williams, Mark McDonald, Daniel J. Fenn, Sam D. Howison

Abstract: Limit order books (LOBs) match buyers and sellers in more than half of the world's financial markets. This survey highlights the insights that have emerged from the wealth of empirical and theoretical studies of LOBs. We examine the findings reported by statistical analyses of historical LOB data and discuss how several LOB models provide insight into certain aspects of the mechanism. We also illu… ▽ More Limit order books (LOBs) match buyers and sellers in more than half of the world's financial markets. This survey highlights the insights that have emerged from the wealth of empirical and theoretical studies of LOBs. We examine the findings reported by statistical analyses of historical LOB data and discuss how several LOB models provide insight into certain aspects of the mechanism. We also illustrate that many such models poorly resemble real LOBs and that several well-established empirical facts have yet to be reproduced satisfactorily. Finally, we identify several key unresolved questions about LOBs. △ Less

Submitted 1 April, 2013; v1 submitted 1 December, 2010; originally announced December 2010.

Comments: 42 pages, 7 figures

Temporal Evolution of Financial Market Correlations

Authors: Daniel J. Fenn, Mason A. Porter, Stacy Williams, Mark McDonald, Neil F. Johnson, Nick S. Jones

Abstract: We investigate financial market correlations using random matrix theory and principal component analysis. We use random matrix theory to demonstrate that correlation matrices of asset price changes contain structure that is incompatible with uncorrelated random price changes. We then identify the principal components of these correlation matrices and demonstrate that a small number of components a… ▽ More We investigate financial market correlations using random matrix theory and principal component analysis. We use random matrix theory to demonstrate that correlation matrices of asset price changes contain structure that is incompatible with uncorrelated random price changes. We then identify the principal components of these correlation matrices and demonstrate that a small number of components accounts for a large proportion of the variability of the markets that we consider. We then characterize the time-evolving relationships between the different assets by investigating the correlations between the asset price time series and principal components. Using this approach, we uncover notable changes that occurred in financial markets and identify the assets that were significantly affected by these changes. We show in particular that there was an increase in the strength of the relationships between several different markets following the 2007--2008 credit and liquidity crisis. △ Less

Submitted 23 May, 2011; v1 submitted 14 November, 2010; originally announced November 2010.

Comments: 15 pages, 10 figures, 1 table. Accepted for publication in Phys. Rev. E. v2 includes additional sections

Journal ref: Physical Review E, Vol. 84, No. 2: 026109 (2011)

Dynamical Clustering of Exchange Rates

Authors: Daniel J. Fenn, Mason A. Porter, Peter J. Mucha, Mark McDonald, Stacy Williams, Neil F. Johnson, Nick S. Jones

Abstract: We use techniques from network science to study correlations in the foreign exchange (FX) market over the period 1991--2008. We consider an FX market network in which each node represents an exchange rate and each weighted edge represents a time-dependent correlation between the rates. To provide insights into the clustering of the exchange rate time series, we investigate dynamic communities in… ▽ More We use techniques from network science to study correlations in the foreign exchange (FX) market over the period 1991--2008. We consider an FX market network in which each node represents an exchange rate and each weighted edge represents a time-dependent correlation between the rates. To provide insights into the clustering of the exchange rate time series, we investigate dynamic communities in the network. We show that there is a relationship between an exchange rate's functional role within the market and its position within its community and use a node-centric community analysis to track the time dynamics of this role. This reveals which exchange rates dominate the market at particular times and also identifies exchange rates that experienced significant changes in market role. We also use the community dynamics to uncover major structural changes that occurred in the FX market. Our techniques are general and will be similarly useful for investigating correlations in other markets. △ Less

Submitted 12 April, 2010; v1 submitted 29 May, 2009; originally announced May 2009.

Comments: 31 pages, 19 figures (some with multiple parts). Section added in v2.

Dynamic communities in multichannel data: An application to the foreign exchange market during the 2007--2008 credit crisis

Authors: Daniel J. Fenn, Mason A. Porter, Mark McDonald, Stacy Williams, Neil F. Johnson, Nick S. Jones

Abstract: We study the cluster dynamics of multichannel (multivariate) time series by representing their correlations as time-dependent networks and investigating the evolution of network communities. We employ a node-centric approach that allows us to track the effects of the community evolution on the functional roles of individual nodes without having to track entire communities. As an example, we cons… ▽ More We study the cluster dynamics of multichannel (multivariate) time series by representing their correlations as time-dependent networks and investigating the evolution of network communities. We employ a node-centric approach that allows us to track the effects of the community evolution on the functional roles of individual nodes without having to track entire communities. As an example, we consider a foreign exchange market network in which each node represents an exchange rate and each edge represents a time-dependent correlation between the rates. We study the period 2005-2008, which includes the recent credit and liquidity crisis. Using dynamical community detection, we find that exchange rates that are strongly attached to their community are persistently grouped with the same set of rates, whereas exchange rates that are important for the transfer of information tend to be positioned on the edges of communities. Our analysis successfully uncovers major trading changes that occurred in the market during the credit crisis. △ Less

Submitted 1 July, 2009; v1 submitted 24 November, 2008; originally announced November 2008.

Comments: 8 pages, 6 figures, accepted for publication in Chaos

Journal ref: Chaos, Vol. 19, No. 3: 033119 (2009)

Impact of Unexpected Events, Shocking News and Rumours on Foreign Exchange Market Dynamics

Authors: Mark McDonald, Omer Suleman, Stacy Williams, Sam Howison, Neil F. Johnson

Abstract: We analyze the dynamical response of the world's financial community to various types of unexpected events, including the 9/11 terrorist attacks as they unfolded on a minute-by-minute basis. We find that there are various 'species' of news, characterized by how quickly the news get absorbed, how much meaning and importance is assigned to it by the community, and what subsequent actions are then… ▽ More We analyze the dynamical response of the world's financial community to various types of unexpected events, including the 9/11 terrorist attacks as they unfolded on a minute-by-minute basis. We find that there are various 'species' of news, characterized by how quickly the news get absorbed, how much meaning and importance is assigned to it by the community, and what subsequent actions are then taken. For example, the response to the unfolding events of 9/11 shows a gradual collective understanding of what was happening, rather than an immediate realization. For news items which are not simple economic statements, and hence whose implications are not immediately obvious, we uncover periods of collective discovery during which collective opinions seem to oscillate in a remarkably synchronized way. In the case of a rumour, our findings also provide a concrete example of contagion in inter-connected communities. Practical applications of this work include the possibility of producing selective newsfeeds for specific communities, based on their likely impact. △ Less

Submitted 20 July, 2006; originally announced July 2006.

Journal ref: Physical Review E, Vol. 77, No. 4: 046110 (2008)

What shakes the FX tree? Understanding currency dominance, dependence and dynamics

Authors: Neil F. Johnson, Mark McDonald, Omer Suleman, Stacy Williams, Sam Howison

Abstract: There is intense interest in understanding the stochastic and dynamical properties of the global Foreign Exchange (FX) market, whose daily transactions exceed one trillion US dollars. This is a formidable task since the FX market is characterized by a web of fluctuating exchange rates, with subtle inter-dependencies which may change in time. In practice, traders talk of particular currencies bei… ▽ More There is intense interest in understanding the stochastic and dynamical properties of the global Foreign Exchange (FX) market, whose daily transactions exceed one trillion US dollars. This is a formidable task since the FX market is characterized by a web of fluctuating exchange rates, with subtle inter-dependencies which may change in time. In practice, traders talk of particular currencies being 'in play' during a particular period of time -- yet there is no established machinery for detecting such important information. Here we apply the construction of Minimum Spanning Trees (MSTs) to the FX market, and show that the MST can capture important features of the global FX dynamics. Moreover, we show that the MST can help identify momentarily dominant and dependent currencies. △ Less

Submitted 1 March, 2005; originally announced March 2005.

Comments: Invited Talk for SPIE meeting on 'Fluctuations and Noise', Texas, May 2005. This document is a modified version of cond-mat/0412411

Detecting a Currency's Dominance or Dependence using Foreign Exchange Network Trees

Authors: Mark McDonald, Omer Suleman, Stacy Williams, Sam Howison, Neil F. Johnson

Abstract: In a system containing a large number of interacting stochastic processes, there will typically be many non-zero correlation coefficients. This makes it difficult to either visualize the system's inter-dependencies, or identify its dominant elements. Such a situation arises in Foreign Exchange (FX) which is the world's biggest market. Here we develop a network analysis of these correlations usin… ▽ More In a system containing a large number of interacting stochastic processes, there will typically be many non-zero correlation coefficients. This makes it difficult to either visualize the system's inter-dependencies, or identify its dominant elements. Such a situation arises in Foreign Exchange (FX) which is the world's biggest market. Here we develop a network analysis of these correlations using Minimum Spanning Trees (MSTs). We show that not only do the MSTs provide a meaningful representation of the global FX dynamics, but they also enable one to determine momentarily dominant and dependent currencies. We find that information about a country's geographical ties emerges from the raw exchange-rate data. Most importantly from a trading perspective, we discuss how to infer which currencies are `in play' during a particular period of time. △ Less

Submitted 15 December, 2004; originally announced December 2004.

Journal ref: Physical Review E, Vol. 72, No. 4: 046106 (2005)