-
Cosmic ray susceptibility of the Terahertz Intensity Mapper detector arrays
Authors:
Lun-Jun Liu,
Reinier M. J. Janssen,
Bruce Bumble,
Elijah Kane,
Logan M. Foote,
Charles M. Bradford,
Steven Hailey-Dunsheath,
Shubh Agrawal,
James E. Aguirre,
Hrushi Athreya,
Justin S. Bracks,
Brockton S. Brendal,
Anthony J. Corso,
Jeffrey P. Filippini,
Jianyang Fu,
Christopher E. Groppi,
Dylan Joralmon,
Ryan P. Keenan,
Mikolaj Kowalik,
Ian N. Lowe,
Alex Manduca,
Daniel P. Marrone,
Philip D. Mauskopf,
Evan C. Mayer,
Rong Nie
, et al. (4 additional authors not shown)
Abstract:
We report on the effects of cosmic ray interactions with the Kinetic Inductance Detector (KID) based focal plane array for the Terahertz Intensity Mapper (TIM). TIM is a NASA-funded balloon-borne experiment designed to probe the peak of the star formation in the Universe. It employs two spectroscopic bands, each equipped with a focal plane of four $\sim\,$900-pixel, KID-based array chips. Measurem…
▽ More
We report on the effects of cosmic ray interactions with the Kinetic Inductance Detector (KID) based focal plane array for the Terahertz Intensity Mapper (TIM). TIM is a NASA-funded balloon-borne experiment designed to probe the peak of the star formation in the Universe. It employs two spectroscopic bands, each equipped with a focal plane of four $\sim\,$900-pixel, KID-based array chips. Measurements of an 864-pixel TIM array shows 791 resonators in a 0.5$\,$GHz bandwidth. We discuss challenges with resonator calibration caused by this high multiplexing density. We robustly identify the physical positions of 788 (99.6$\,$%) detectors using a custom LED-based identification scheme. Using this information we show that cosmic ray events occur at a rate of 2.1$\,\mathrm{events/min/cm^2}$ in our array. 66$\,$% of the events affect a single pixel, and another 33$\,$% affect $<\,$5 KIDs per event spread over a 0.66$\,\mathrm{cm^2}$ region (2 pixel pitches in radius). We observe a total cosmic ray dead fraction of 0.0011$\,$%, and predict that the maximum possible in-flight dead fraction is $\sim\,$0.165$\,$%, which demonstrates our design will be robust against these high-energy events.
△ Less
Submitted 24 July, 2024;
originally announced July 2024.
-
CCAT: Detector Noise Limited Performance of the RFSoC-based Readout Electronics for mm/sub-mm/far-IR KIDs
Authors:
Adrian K. Sinclair,
James Burgoyne,
Anthony I. Huber,
Colin Murphy,
Steve K. Choi,
Cody J. Duell,
Zachary B. Huber,
Yaqiong Li,
Scott C. Chapman,
Michael D. Niemack,
Thomas Nikola,
Eve M. Vavagiakis,
Samantha Walker,
Jordan D. Wheeler,
Jason Austermann,
Lawrence Lin,
Ruixuan Xie,
Bugao Zou,
Philip D. Mauskopf
Abstract:
The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of…
▽ More
The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of fabrication, and simplified cryogenic readout, which are all beneficial for successful deployment at scale. The cryogenic multiplexing complexity is pulled out of the cryostat and is instead pushed into the digital signal processing of the room temperature electronics. Using the Xilinx Radio Frequency System on a Chip (RFSoC), a highly multiplexed KID readout was developed for the first light Prime-Cam and commissioning Mod-Cam instruments. We report on the performance of the RFSoC-based readout with multiple detector arrays in various cryogenic setups. Specifically we demonstrate detector noise limited performance of the RFSoC-based readout under the expected optical loading conditions.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Science opportunities with solar sailing smallsats
Authors:
Slava G. Turyshev,
Darren Garber,
Louis D. Friedman,
Andreas M. Hein,
Nathan Barnes,
Konstantin Batygin,
G. David Brin,
Michael E. Brown,
Leroy Cronin,
Artur Davoyan,
Amber Dubill,
T. Marshall Eubanks,
Sarah Gibson,
Donald M. Hassler,
Noam R. Izenberg,
Pierre Kervella,
Philip D. Mauskopf,
Neil Murphy,
Andrew Nutter,
Carolyn Porco,
Dario Riccobono,
James Schalkwyk,
Kevin B. Stevenson,
Mark V. Sykes,
Mahmooda Sultana
, et al. (3 additional authors not shown)
Abstract:
Recently, we witnessed how the synergy of small satellite technology and solar sailing propulsion enables new missions. Together, small satellites with lightweight instruments and solar sails offer affordable access to deep regions of the solar system, also making it possible to realize hard-to-reach trajectories that are not constrained to the ecliptic plane. Combining these two technologies can…
▽ More
Recently, we witnessed how the synergy of small satellite technology and solar sailing propulsion enables new missions. Together, small satellites with lightweight instruments and solar sails offer affordable access to deep regions of the solar system, also making it possible to realize hard-to-reach trajectories that are not constrained to the ecliptic plane. Combining these two technologies can drastically reduce travel times within the solar system, while delivering robust science. With solar sailing propulsion capable of reaching the velocities of ~5-10 AU/yr, missions using a rideshare launch may reach the Jovian system in two years, Saturn in three. The same technologies could allow reaching solar polar orbits in less than two years. Fast, cost-effective, and maneuverable sailcraft that may travel outside the ecliptic plane open new opportunities for affordable solar system exploration, with great promise for heliophysics, planetary science, and astrophysics. Such missions could be modularized to reach different destinations with different sets of instruments. Benefiting from this progress, we present the "Sundiver" concept, offering novel possibilities for the science community. We discuss some of the key technologies, the current design of the Sundiver sailcraft vehicle and innovative instruments, along with unique science opportunities that these technologies enable, especially as this exploration paradigm evolves. We formulate policy recommendations to allow national space agencies, industry, and other stakeholders to establish a strong scientific, programmatic, and commercial focus, enrich and deepen the space enterprise and broaden its advocacy base by including the Sundiver paradigm as a part of broader space exploration efforts.
△ Less
Submitted 19 July, 2023; v1 submitted 27 March, 2023;
originally announced March 2023.
-
Demonstration of microwave multiplexed readout of DC biased superconducting nanowire detectors
Authors:
A. K. Sinclair,
E. Schroeder,
D. Zhu,
M. Colangelo,
J. Glasby,
P. D. Mauskopf,
H. Mani,
K. K. Berggren
Abstract:
Superconducting nanowires are widely used as sensitive single photon detectors with wide spectral coverage and high timing resolution. We describe a demonstration of an array of DC biased superconducting nanowire single photon detectors read out with a microwave multiplexing circuit. In this design, each individual nanowire is part of a resonant LC circuit where the inductance is dominated by the…
▽ More
Superconducting nanowires are widely used as sensitive single photon detectors with wide spectral coverage and high timing resolution. We describe a demonstration of an array of DC biased superconducting nanowire single photon detectors read out with a microwave multiplexing circuit. In this design, each individual nanowire is part of a resonant LC circuit where the inductance is dominated by the kinetic inductance of the nanowire. The circuit also contains two parallel plate capacitors, one of them is in parallel with the inductor and the other is coupled to a microwave transmission line which carries the signals to a cryogenic low noise amplifier. All of the nanowires are connected via resistors to a single DC bias line that enables the nanowires to be current biased close to their critical current. When a photon hits a nanowire it creates a normal hot spot which produces a voltage pulse across the LC circuit. This pulse rings down at the resonant frequency of the LC circuit over a time period that is fixed by the quality factor. We present measurements of an array of these devices and an evaluation of their performance in terms of frequency and time response.
△ Less
Submitted 16 May, 2019;
originally announced May 2019.
-
Studies of Systematic Uncertainties for Simons Observatory: Optical Effects and Sensitivity Considerations
Authors:
Patricio A. Gallardo,
Jon Gudmundsson,
Brian J. Koopman,
Frederick T. Matsuda,
Sara M. Simon,
Aamir Ali,
Sean Bryan,
Yuji Chinone,
Gabriele Coppi,
Nicholas Cothard,
Mark J. Devlin,
Simon Dicker,
Giulio Fabbian,
Nicholas Galitzki,
Charles A. Hill,
Brian Keating,
Akito Kusaka,
Jacob Lashner,
Adrian T. Lee,
Michele Limon,
Philip D. Mauskopf,
Jeff McMahon,
Federico Nati,
Michael D. Niemack,
John L. Orlowski-Scherer
, et al. (10 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work i…
▽ More
The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work is part of a series of papers studying calibration, sensitivity, and systematic errors for SO. In this paper, we discuss current efforts to model optical systematic effects, how these have been used to guide the design of the SO instrument, and how these studies can be used to inform instrument design of future experiments like CMB-S4. While optical systematics studies are underway for both the small aperture and large aperture telescopes, we limit the focus of this paper to the more mature large aperture telescope design for which our studies include: pointing errors, optical distortions, beam ellipticity, cross-polar response, instrumental polarization rotation and various forms of sidelobe pickup.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
Optical performance of an ultra-sensitive horn-coupled transition-edge-sensor bolometer with hemispherical backshort in the far infrared
Authors:
Michael D. Audley,
Gert de Lange,
Jian-Rong Gao,
Pourya Khosropanah,
Richard Hijmering,
Marcel Ridder,
Philip D. Mauskopf,
Dmitry Morozov,
Neil A. Trappe,
Stephen Doherty
Abstract:
The next generation of far infrared space observatories will require extremely sensitive detectors that can be realized only by combining extremely low intrinsic noise with high optical efficiency. We have measured the broad-band optical response of ultra-sensitive TES bolometers (NEP$\approx2\rm\ aW/\sqrt Hz$) in the 30--60-$μ\rm m$ band where radiation is coupled to the detectors with a few-mode…
▽ More
The next generation of far infrared space observatories will require extremely sensitive detectors that can be realized only by combining extremely low intrinsic noise with high optical efficiency. We have measured the broad-band optical response of ultra-sensitive TES bolometers (NEP$\approx2\rm\ aW/\sqrt Hz$) in the 30--60-$μ\rm m$ band where radiation is coupled to the detectors with a few-moded conical feedhorn and a hemispherical backshort. We show that these detectors have an optical efficiency of 60% (the ratio of the power detected by the TES bolometer to the total power propagating through the feedhorn). We find that the measured optical efficiency can be understood in terms of the modes propagating through the feedhorn with the aid of a spatial mode-filtering technique.
△ Less
Submitted 25 March, 2016;
originally announced March 2016.
-
Optical Response of Strained- and Unstrained-Silicon Cold-Electron Bolometers
Authors:
T. L. R. Brien,
P. A. R. Ade,
P. S. Barry,
C. J. Dunscombe,
D. R. Leadley,
D. V. Morozov,
M. Myronov,
E. H. C. Parker,
M. J. Prest,
M. Prunnila,
R. V. Sudiwala,
T. E. Whall,
P. D. Mauskopf
Abstract:
We describe the optical characterisation of two silicon cold-electron bolometers each consisting of a small ($32 \times 14~\mathrm{μm}$) island of degenerately doped silicon with superconducting aluminium contacts. Radiation is coupled into the silicon absorber with a twin-slot antenna designed to couple to 160-GHz radiation through a silicon lens.The first device has a highly doped silicon absorb…
▽ More
We describe the optical characterisation of two silicon cold-electron bolometers each consisting of a small ($32 \times 14~\mathrm{μm}$) island of degenerately doped silicon with superconducting aluminium contacts. Radiation is coupled into the silicon absorber with a twin-slot antenna designed to couple to 160-GHz radiation through a silicon lens.The first device has a highly doped silicon absorber, the second has a highly doped strained-silicon absorber.Using a novel method of cross-correlating the outputs from two parallel amplifiers, we measure noise-equivalent powers of $3.0 \times 10^{-16}$ and $6.6 \times 10^{-17}~\mathrm{W\,Hz^{-1/2}}$ for the control and strained device, respectively, when observing radiation from a 77-K source. In the case of the strained device, the noise-equivalent power is limited by the photon noise.
△ Less
Submitted 10 March, 2016;
originally announced March 2016.
-
A Strained Silicon Cold Electron Bolometer using Schottky Contacts
Authors:
T. L. R. Brien,
P. A. R. Ade,
P. S. Barry,
C. Dunscombe,
D. R. Leadley,
D. V. Morozov,
M. Myronov,
E. H. C. Parker,
M. Prunnila,
M. J. Prest,
R. V. Sudiwala,
T. E. Whall,
P. D. Mauskopf
Abstract:
We describe optical characterisation of a Strained Silicon Cold Electron Bolometer (CEB), operating on a $350~\mathrm{mK}$ stage, designed for absorption of millimetre-wave radiation. The silicon Cold Electron Bolometer utilises Schottky contacts between a superconductor and an n++ doped silicon island to detect changes in the temperature of the charge carriers in the silicon, due to variations in…
▽ More
We describe optical characterisation of a Strained Silicon Cold Electron Bolometer (CEB), operating on a $350~\mathrm{mK}$ stage, designed for absorption of millimetre-wave radiation. The silicon Cold Electron Bolometer utilises Schottky contacts between a superconductor and an n++ doped silicon island to detect changes in the temperature of the charge carriers in the silicon, due to variations in absorbed radiation. By using strained silicon as the absorber, we decrease the electron-phonon coupling in the device and increase the responsivity to incoming power. The strained silicon absorber is coupled to a planar aluminium twin-slot antenna designed to couple to $160~\mathrm{GHz}$ and that serves as the superconducting contacts. From the measured optical responsivity and spectral response, we calculate a maximum optical efficiency of $50~\%$ for radiation coupled into the device by the planar antenna and an overall noise equivalent power (NEP), referred to absorbed optical power, of $1.1 \times 10^{-16}~\mathrm{\mbox{W Hz}^{-1/2}}$ when the detector is observing a $300~\mathrm{K}$ source through a $4~\mathrm{K}$ throughput limiting aperture. Even though this optical system is not optimised we measure a system noise equivalent temperature difference (NETD) of $6~\mathrm{\mbox{mK Hz}^{-1/2}}$. We measure the noise of the device using a cross-correlation of time stream data measured simultaneously with two junction field-effect transistor (JFET) amplifiers, with a base correlated noise level of $300~\mathrm{\mbox{pV Hz}^{-1/2}}$ and find that the total noise is consistent with a combination of photon noise, current shot noise and electron-phonon thermal noise.
△ Less
Submitted 31 July, 2014; v1 submitted 8 July, 2014;
originally announced July 2014.
