-
Anisotropy of shear relaxation in primitive chain network simulations for entangled polymers confined between flat walls
Authors:
Yuichi Masubuchi
Abstract:
Anisotropic shear relaxation is an interesting but rarely discussed issue in polymer dynamics under confinement [Abberton et al., Macromolecules, 48, 7631, 2015]. According to the earlier study of bead spring simulations for an unentangled polymer melt confined between two flat plates, the shear relaxation modulus taken perpendicular to the interface is accelerated by decreasing the distance betwe…
▽ More
Anisotropic shear relaxation is an interesting but rarely discussed issue in polymer dynamics under confinement [Abberton et al., Macromolecules, 48, 7631, 2015]. According to the earlier study of bead spring simulations for an unentangled polymer melt confined between two flat plates, the shear relaxation modulus taken perpendicular to the interface is accelerated by decreasing the distance between plates, whereas the parallel component is unchanged. This study observed similar anisotropic shear relaxation for entangled polymer melts under confinement in multi-chain slip-link simulations (primitive chain network simulations). The analysis demonstrated that the accelerated relaxation in the perpendicular component reflects the Rouse-type constraint release dynamics, for which the coarsening is upper-limited by the geometry. This result suggests a novel mechanism for anisotropic shear relaxation different from the modified chain statistics under confinement considered for unentangled systems.
△ Less
Submitted 10 November, 2023;
originally announced November 2023.
-
Extension of Moving Particle Simulation including rotational degrees of freedom for dilute fiber suspension
Authors:
Keigo Enomoto,
Takato Ishida,
Yuya Doi,
Takashi Uneyama,
Yuichi Masubuchi
Abstract:
We develop a novel Moving Particle Simulation (MPS) method to accurately reproduce the motion of fibers floating in sheared liquids. In conventional MPS schemes, if a fiber suspended in a liquid is represented by a one-dimensional array of MPS particles, it is entirely aligned to the flow direction due to the lack of shear stress difference between fiber-liquid interfaces. To address this problem,…
▽ More
We develop a novel Moving Particle Simulation (MPS) method to accurately reproduce the motion of fibers floating in sheared liquids. In conventional MPS schemes, if a fiber suspended in a liquid is represented by a one-dimensional array of MPS particles, it is entirely aligned to the flow direction due to the lack of shear stress difference between fiber-liquid interfaces. To address this problem, we employ the micropolar fluid model to introduce rotational degrees of freedom into the MPS particles. The translational motion of liquid and solid particles and the rotation of solid particles are calculated with the explicit MPS algorithm. The fiber is modeled as an array of micropolar fluid particles bonded with stretching and bending potentials. The motion of a single rigid fiber is simulated in a three-dimensional shear flow generated between two moving solid walls. We show that the proposed method is capable of reproducing the fiber motion predicted by Jeffery's theory being different from the conventional MPS simulations.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
Primitive Chain Network Simulations of Entangled Melts of Symmetric and Asymmetric Star Polymers in Uniaxial Elongational Flows
Authors:
Yuichi Masubuchi,
Giovanni Ianniruberto,
Giuseppe Marrucci
Abstract:
Ianniruberto and Marrucci developed a theory whereby entangled branched polymers behave like linear ones in fast elongational flows. In order to test such prediction, Huang et al. performed elongational measurements on star polymer melts, indeed revealing that, in fast flows, the elongational viscosity is insensitive to the molecular structure, provided the molecular weight of the backbone is the…
▽ More
Ianniruberto and Marrucci developed a theory whereby entangled branched polymers behave like linear ones in fast elongational flows. In order to test such prediction, Huang et al. performed elongational measurements on star polymer melts, indeed revealing that, in fast flows, the elongational viscosity is insensitive to the molecular structure, provided the molecular weight of the backbone is the same. Inspired by these studies, we here report on results obtained with multi-chain slip-link simulations for symmetric and asymmetric star polymer melts, as well as calculations of the Rouse time of the examined branched structures. The simulations semi-quantitatively reproduce the experimental data if the Kuhn-segment orientation-induced reduction of friction (SORF) is accounted for. The observed insensitivity of the nonlinear elongational viscosity to the molecular structure for the same span molar mass may be due to several factors. In the symmetric case, the calculated Rouse time of the star marginally differs from that of the linear molecule, so that possible differences in the observed stress fall within the experimental uncertainty. Secondly, it is possible that the flow-induced formation of hooked star pairs makes the effective Rouse time of the aggregate even closer to that of the linear polymer because the friction center moves towards the branchpoint of the star molecule. In the asymmetric case, it is shown that the stress contributed by the short arms is negligible with respect to that of the long ones. However, such stress-reduction is balanced by a dilution effect whereby the unstretched arms reduce SORF as they decrease the Kuhn-segment order parameter of the system. As a result of that dilution, the stress contributed by the backbone is larger. The two effects compensate one another so that the overall stress is virtually the same as the other architectures.
△ Less
Submitted 17 January, 2021;
originally announced January 2021.
-
Wall slip in primitive chain network simulations of shear startup of entangled polymers and its effect on the shear stress undershoot
Authors:
Yuichi Masubuchi,
Dimitris Vlassopoulos,
Giovanni Ianniruberto,
Giuseppe Marrucci
Abstract:
In some recent experiments on entangled polymers of stress growth in startup of fast shear flows an undershoot in the shear stress is observed following the overshoot, i.e., before approaching the steady state. Whereas tumbling of the entangled chain was proposed to be at its origin, here we investigate another possible cause for the stress undershoot, i.e., slippage at the interface between polym…
▽ More
In some recent experiments on entangled polymers of stress growth in startup of fast shear flows an undershoot in the shear stress is observed following the overshoot, i.e., before approaching the steady state. Whereas tumbling of the entangled chain was proposed to be at its origin, here we investigate another possible cause for the stress undershoot, i.e., slippage at the interface between polymer and solid wall. To this end, we extend the primitive chain network model to include slip at the interface between entangled polymeric liquids and solid walls with grafted polymers. We determine the slip velocity at the wall, and the shear rate in the bulk, by imposing that the shear stress in the bulk polymers is equal to that resulting from the polymers grafted at the wall. After confirming that the predicted results for the steady state are reasonable, we examine the transient behavior. The simulations confirm that slippage weakens the magnitude of the stress overshoot, as reported earlier. The undershoot is also weakened, or even disappears, because of a reduced coherence in molecular tumbling. In other words, the disentanglement between grafted and bulk chains, occurring throughout the stress overshoot region, does not contribute to the stress undershoot.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
Elasticity of randomly cross-linked networks in primitive chain network simulations
Authors:
Yuichi Masubuchi
Abstract:
Primitive chain network simulations for randomly cross-linked slip-link networks were performed. For the percolated networks, the stress-strain relationship was compared to the theories by Ball et al. [Polymer, 22, 1010 (1981)] and Rubinstein and Panyukov [Macromolecules, 35, 6670 (2002)]. The simulation results were reasonably reproduced by both theories, given that the contributions from cross-l…
▽ More
Primitive chain network simulations for randomly cross-linked slip-link networks were performed. For the percolated networks, the stress-strain relationship was compared to the theories by Ball et al. [Polymer, 22, 1010 (1981)] and Rubinstein and Panyukov [Macromolecules, 35, 6670 (2002)]. The simulation results were reasonably reproduced by both theories, given that the contributions from cross-links and slip-links were used as fitting parameters. However, these parameters were model dependent. Besides, the theories cannot describe the simulation results if the parameters were determined from the number of active links involved in the percolated networks. These results reveal that the fitting of experimental data to the theories does not provide a fraction of entanglements in the system unless the network only consists of Gaussian strands and it correctly reaches the state of free-energy minimum.
△ Less
Submitted 6 November, 2020;
originally announced November 2020.
-
Multi-chain slip-spring simulations with various slip-spring densities
Authors:
Yuichi Masubuchi,
Yuya Doi,
Takashi Uneyama
Abstract:
Although it has been established that the multi-chain slip-spring (MCSS) model can reproduce entangled polymer dynamics, the effects of model parameters have not been fully elucidated yet. In this study, we systematically investigated the effects of slip-spring density. For the diffusion and the linear viscoelasticity, the simulation results exhibited universality. Namely, the results from the sim…
▽ More
Although it has been established that the multi-chain slip-spring (MCSS) model can reproduce entangled polymer dynamics, the effects of model parameters have not been fully elucidated yet. In this study, we systematically investigated the effects of slip-spring density. For the diffusion and the linear viscoelasticity, the simulation results exhibited universality. Namely, the results from the simulations with various slip-spring densities can be superposed with each other by the conversion factors for the bead number per chain, unit of length, unit of time, and modulus. The diffusion and the viscoelasticity were in good agreement with the literature data for the standard bead-spring simulations, including the molecular weight dependence. The universality among the MCSS simulations with various slip-spring density also held under mild shear if the slip-spring density was not significantly high. The results imply that the level of coarse-graining for the MCSS model can be arbitrarily chosen as in the Rouse model.
△ Less
Submitted 6 November, 2020;
originally announced November 2020.
