-
Acoustic Positioning for Deep Sea Neutrino Telescopes with a System of Piezo Sensors Integrated into Glass Spheres
Authors:
A. Albert,
S. Alves,
M. André,
M. Ardid,
S. Ardid,
J. -J. Aubert,
J. Aublin,
B. Baret,
S. Basa,
Y. Becherini,
B. Belhorma,
M. Bendahman,
F. Benfenati,
V. Bertin,
S. Biagi,
J. Boumaaza,
M. Bouta,
M. C. Bouwhuis,
H. Brânzaş,
R. Bruijn,
J. Brunner,
J. Busto,
B. Caiffi,
D. Calvo,
S. Campion
, et al. (115 additional authors not shown)
Abstract:
Position calibration in the deep sea is typically done by means of acoustic multilateration using three or more acoustic emitters installed at known positions. Rather than using hydrophones as receivers that are exposed to the ambient pressure, the sound signals can be coupled to piezo ceramics glued to the inside of existing containers for electronics or measuring instruments of a deep sea infras…
▽ More
Position calibration in the deep sea is typically done by means of acoustic multilateration using three or more acoustic emitters installed at known positions. Rather than using hydrophones as receivers that are exposed to the ambient pressure, the sound signals can be coupled to piezo ceramics glued to the inside of existing containers for electronics or measuring instruments of a deep sea infrastructure. The ANTARES neutrino telescope operated from 2006 until 2022 in the Mediterranean Sea at a depth exceeding 2000m. It comprised nearly 900 glass spheres with 432mm diameter and 15mm thickness, equipped with photomultiplier tubes to detect Cherenkov light from tracks of charged elementary particles. In an experimental setup within ANTARES, piezo sensors have been glued to the inside of such - otherwise empty - glass spheres. These sensors recorded signals from acoustic emitters with frequencies from 46545 to 60235Hz. Two waves propagating through the glass sphere are found as a result of the excitation by the waves in the water. These can be qualitatively associated with symmetric and asymmetric Lamb-like waves of zeroth order: a fast (early) one with $v_e \approx 5$mm/$μ$s and a slow (late) one with $v_\ell \approx 2$mm/$μ$s. Taking these findings into account improves the accuracy of the position calibration. The results can be transferred to the KM3NeT neutrino telescope, currently under construction at multiple sites in the Mediterranean Sea, for which the concept of piezo sensors glued to the inside of glass spheres has been adapted for monitoring the positions of the photomultiplier tubes.
△ Less
Submitted 7 January, 2025; v1 submitted 12 May, 2024;
originally announced May 2024.
-
The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production
Authors:
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardacova,
B. Baret,
A. Bariego Quintana,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (259 additional authors not shown)
Abstract:
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl…
▽ More
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Development of a trigger for acoustic neutrino candidates in KM3NeT
Authors:
Dídac D. Tortosa,
Miguel Ardid,
Manuel Bou-Cabo,
Guillermo Lara,
Juan A. Martínez-Mora
Abstract:
The KM3NeT Collaboration is constructing two large neutrino detectors in the Mediterranean Sea: ARCA, located near Sicily and aiming at neutrino astronomy, and ORCA located near Toulon and designed for the study of intrinsic neutrino properties. The two detectors together will have hundreds of Detection Units with Digital Optical Modules kept vertically by buoyancy forming a large 3D optical array…
▽ More
The KM3NeT Collaboration is constructing two large neutrino detectors in the Mediterranean Sea: ARCA, located near Sicily and aiming at neutrino astronomy, and ORCA located near Toulon and designed for the study of intrinsic neutrino properties. The two detectors together will have hundreds of Detection Units with Digital Optical Modules kept vertically by buoyancy forming a large 3D optical array for detecting the Cherenkov light produced after the neutrino interactions. To properly reconstruct the direction of the incoming neutrino, the position of the DOMs, which are not static due to the sea currents, must be monitored. For this purpose, the detector is equipped with an Acoustic Positioning System, which is composed of fixed acoustic emitters on the sea bottom, a hydrophone in each DU base, and a piezoceramic sensor in each DOM, as acoustic receivers. This network of acoustic sensors can be used not only for positioning, but also for acoustic monitoring studies such as bioacoustics, ship noise monitoring, environmental noise control, and acoustic neutrinos detection. This work explores the possibility of creating a trigger for saving the data for ultra-high-energy neutrino candidates detected acoustically by the hydrophones. The acoustic signal caused by the neutrino interaction in a fluid is a short-time duration Bipolar Pulse extremely directive and with a Fourier transform extending over a wide range of frequencies. A study of signal detection, has been done by simulating BP produced by the interaction of a UHE neutrino at 1 km from the detector at zero-degree incidence added to the experimental real acoustic data. Finally, a trigger proposal has been developed in order to record candidates of BPs and it has been tested. The number of candidates per second, precision, and recall have been monitored according to the cuts applied and parameters calculated by the algorithm.
△ Less
Submitted 17 January, 2023; v1 submitted 18 November, 2022;
originally announced November 2022.
-
Nanobeacon: A time calibration device for the KM3NeT neutrino telescope
Authors:
S. Aiello,
A. Albert,
M. Alshamsi,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
G. Androulakis,
M. Anghinolfi,
M. Anguita,
M. Ardid,
S. Ardid,
J. Aublin,
C. Bagatelas,
B. Baret,
S. Basegmez du Pree,
M. Bendahman,
F. Benfenati,
E. Berbee,
A. M. van den Berg,
V. Bertine,
S. Biagi,
M. Boettcher,
M. Bou Cabo
, et al. (216 additional authors not shown)
Abstract:
The KM3NeT Collaboration is currently constructing a multi-site high-energy neutrino telescope in the Mediterranean Sea consisting of matrices of pressure-resistant glass spheres, each holding a set of 31 small-area photomultipliers. The main goals of the telescope are the observation of neutrino sources in the Universe and the measurement of the neutrino oscillation parameters with atmospheric ne…
▽ More
The KM3NeT Collaboration is currently constructing a multi-site high-energy neutrino telescope in the Mediterranean Sea consisting of matrices of pressure-resistant glass spheres, each holding a set of 31 small-area photomultipliers. The main goals of the telescope are the observation of neutrino sources in the Universe and the measurement of the neutrino oscillation parameters with atmospheric neutrinos. Both extraterrestrial and atmospheric neutrinos are detected through the Cherenkov light induced in seawater by charged particles produced in neutrino interactions in the surrounding medium. A relative time synchronization between photomultipliers of the order of 1 ns is needed to guarantee the required angular resolution of the detector. Due to the large detector volumes to be instrumented by KM3NeT, a cost reduction of the different systems is a priority. To this end, the inexpensive Nanobeacon has been designed and developed by the KM3NeT Collaboration to be used for detector time-calibration studies. At present, more than 600 Nanobeacons have been already produced. The characterization of the optical pulse and the wavelength emission profile of the devices are critical for the time calibration. In this paper, the main features of the Nanobeacon design, production and operation, together with the main properties of the light pulse generated are described.
△ Less
Submitted 30 October, 2021;
originally announced November 2021.
-
Studying Bioluminescence Flashes with the ANTARES Deep Sea Neutrino Telescope
Authors:
N. Reeb,
S. Hutschenreuter,
P. Zehetner,
T. Ensslin,
S. Alves,
M. André,
M. Anghinolfi,
G. Anton,
M. Ardid,
J. -J. Aubert,
J. Aublin,
B. Baret,
S. Basa,
B. Belhorma,
M. Bendahman,
V. Bertin,
S. Biagi,
M. Bissinger,
J. Boumaaza,
M. Bouta,
M. C. Bouwhuis,
H. Brânzaş,
R. Bruijn,
J. Brunner,
J. Busto
, et al. (119 additional authors not shown)
Abstract:
We develop a novel technique to exploit the extensive data sets provided by underwater neutrino telescopes to gain information on bioluminescence in the deep sea. The passive nature of the telescopes gives us the unique opportunity to infer information on bioluminescent organisms without actively interfering with them. We propose a statistical method that allows us to reconstruct the light emissio…
▽ More
We develop a novel technique to exploit the extensive data sets provided by underwater neutrino telescopes to gain information on bioluminescence in the deep sea. The passive nature of the telescopes gives us the unique opportunity to infer information on bioluminescent organisms without actively interfering with them. We propose a statistical method that allows us to reconstruct the light emission of individual organisms, as well as their location and movement. A mathematical model is built to describe the measurement process of underwater neutrino telescopes and the signal generation of the biological organisms. The Metric Gaussian Variational Inference algorithm is used to reconstruct the model parameters using photon counts recorded by the neutrino detectors. We apply this method to synthetic data sets and data collected by the ANTARES neutrino telescope. The telescope is located 40 km off the French coast and fixed to the sea floor at a depth of 2475 m. The runs with synthetic data reveal that we can reliably model the emitted bioluminescent flashes of the organisms. Furthermore, we find that the spatial resolution of the localization of light sources highly depends on the configuration of the telescope. Precise measurements of the efficiencies of the detectors and the attenuation length of the water are crucial to reconstruct the light emission. Finally, the application to ANTARES data reveals the first precise localizations of bioluminescent organisms using neutrino telescope data.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
Event reconstruction for KM3NeT/ORCA using convolutional neural networks
Authors:
Sebastiano Aiello,
Arnauld Albert,
Sergio Alves Garre,
Zineb Aly,
Fabrizio Ameli,
Michel Andre,
Giorgos Androulakis,
Marco Anghinolfi,
Mancia Anguita,
Gisela Anton,
Miquel Ardid,
Julien Aublin,
Christos Bagatelas,
Giancarlo Barbarino,
Bruny Baret,
Suzan Basegmez du Pree,
Meriem Bendahman,
Edward Berbee,
Vincent Bertin,
Simone Biagi,
Andrea Biagioni,
Matthias Bissinger,
Markus Boettcher,
Jihad Boumaaza,
Mohammed Bouta
, et al. (207 additional authors not shown)
Abstract:
The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neur…
▽ More
The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neural networks to neutrino telescopes, using simulated datasets for the KM3NeT/ORCA detector as an example. To this end, the networks are employed to achieve reconstruction and classification tasks that constitute an alternative to the analysis pipeline presented for KM3NeT/ORCA in the KM3NeT Letter of Intent. They are used to infer event reconstruction estimates for the energy, the direction, and the interaction point of incident neutrinos. The spatial distribution of Cherenkov light generated by charged particles induced in neutrino interactions is classified as shower- or track-like, and the main background processes associated with the detection of atmospheric neutrinos are recognized. Performance comparisons to machine-learning classification and maximum-likelihood reconstruction algorithms previously developed for KM3NeT/ORCA are provided. It is shown that this application of deep convolutional neural networks to simulated datasets for a large-volume neutrino telescope yields competitive reconstruction results and performance improvements with respect to classical approaches.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
Dependence of atmospheric muon flux on seawater depth measured with the first KM3NeT detection units
Authors:
KM3NeT Collaboration,
M. Ageron,
S. Aiello,
F. Ameli,
M. Andre,
G. Androulakis,
M. Anghinolfi,
G. Anton,
M. Ardid,
J. Aublin,
C. Bagatelas,
G. Barbarino,
B. Baret,
S. Basegmez du Pree,
A. Belias,
E. Berbee,
A. M. van den Berg,
V. Bertin,
V. van Beveren,
S. Biagi,
A. Biagioni,
S. Bianucci,
M. Billault,
M. Bissinger,
R. de Boer
, et al. (240 additional authors not shown)
Abstract:
KM3NeT is a research infrastructure located in the Mediterranean Sea, that will consist of two deep-sea Cherenkov neutrino detectors. With one detector (ARCA), the KM3NeT Collaboration aims at identifying and studying TeV-PeV astrophysical neutrino sources. With the other detector (ORCA), the neutrino mass ordering will be determined by studying GeV-scale atmospheric neutrino oscillations. The fir…
▽ More
KM3NeT is a research infrastructure located in the Mediterranean Sea, that will consist of two deep-sea Cherenkov neutrino detectors. With one detector (ARCA), the KM3NeT Collaboration aims at identifying and studying TeV-PeV astrophysical neutrino sources. With the other detector (ORCA), the neutrino mass ordering will be determined by studying GeV-scale atmospheric neutrino oscillations. The first KM3NeT detection units were deployed at the Italian and French sites between 2015 and 2017. In this paper, a description of the detector is presented, together with a summary of the procedures used to calibrate the detector in-situ. Finally, the measurement of the atmospheric muon flux between 2232-3386 m seawater depth is obtained.
△ Less
Submitted 4 February, 2020; v1 submitted 6 June, 2019;
originally announced June 2019.
-
An algorithm for the reconstruction of neutrino-induced showers in the ANTARES neutrino telescope
Authors:
A. Albert,
M. André,
M. Anghinolfi,
G. Anton,
M. Ardid,
J. -J. Aubert,
T. Avgitas,
B. Baret,
J. Barrios-Martí,
S. Basa,
B. Belhorma,
V. Bertin,
S. Biagi,
R. Bormuth,
S. Bourret,
M. C. Bouwhuis,
H. Brânzaş,
R. Bruijn,
J. Brunner,
J. Busto,
A. Capone,
L. Caramete,
J. Carr,
S. Celli,
R. Cherkaoui El Moursli
, et al. (102 additional authors not shown)
Abstract:
Muons created by $ν_μ$ charged current (CC) interactions in the water surrounding the ANTARES neutrino telescope have been almost exclusively used so far in searches for cosmic neutrino sources. Due to their long range, highly energetic muons inducing Cherenkov radiation in the water are reconstructed with dedicated algorithms that allow the determination of the parent neutrino direction with a me…
▽ More
Muons created by $ν_μ$ charged current (CC) interactions in the water surrounding the ANTARES neutrino telescope have been almost exclusively used so far in searches for cosmic neutrino sources. Due to their long range, highly energetic muons inducing Cherenkov radiation in the water are reconstructed with dedicated algorithms that allow the determination of the parent neutrino direction with a median angular resolution of about \unit{0.4}{\degree} for an $E^{-2}$ neutrino spectrum. In this paper, an algorithm optimised for accurate reconstruction of energy and direction of shower events in the ANTARES detector is presented. Hadronic showers of electrically charged particles are produced by the disintegration of the nucleus both in CC and neutral current (NC) interactions of neutrinos in water. In addition, electromagnetic showers result from the CC interactions of electron neutrinos while the decay of a tau lepton produced in $ν_τ$ CC interactions will in most cases lead to either a hadronic or an electromagnetic shower. A shower can be approximated as a point source of photons. With the presented method, the shower position is reconstructed with a precision of about \unit{1}{\metre}, the neutrino direction is reconstructed with a median angular resolution between \unit{2}{\degree} and \unit{3}{\degree} in the energy range of \SIrange{1}{1000}{TeV}. In this energy interval, the uncertainty on the reconstructed neutrino energy is about \SIrange{5}{10}{\%}. The increase in the detector sensitivity due to the use of additional information from shower events in the searches for a cosmic neutrino flux is also presented.
△ Less
Submitted 19 January, 2018; v1 submitted 11 August, 2017;
originally announced August 2017.
-
Intrinsic limits on resolutions in muon- and electron-neutrino charged-current events in the KM3NeT/ORCA detector
Authors:
S. Adrián-Martínez,
M. Ageron,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
M. Andre,
G. Androulakis,
M. Anghinolfi,
G. Anton,
M. Ardid,
T. Avgitas,
G. Barbarino,
E. Barbarito,
B. Baret,
J. Barrios-Martí,
A. Belias,
E. Berbee,
A. van den Berg,
V. Bertin,
S. Beurthey,
V. van Beveren,
N. Beverini,
S. Biagi,
A. Biagioni
, et al. (228 additional authors not shown)
Abstract:
Studying atmospheric neutrino oscillations in the few-GeV range with a multimegaton detector promises to determine the neutrino mass hierarchy. This is the main science goal pursued by the future KM3NeT/ORCA water Cherenkov detector in the Mediterranean Sea. In this paper, the processes that limit the obtainable resolution in both energy and direction in charged-current neutrino events in the ORCA…
▽ More
Studying atmospheric neutrino oscillations in the few-GeV range with a multimegaton detector promises to determine the neutrino mass hierarchy. This is the main science goal pursued by the future KM3NeT/ORCA water Cherenkov detector in the Mediterranean Sea. In this paper, the processes that limit the obtainable resolution in both energy and direction in charged-current neutrino events in the ORCA detector are investigated. These processes include the composition of the hadronic fragmentation products, the subsequent particle propagation and the photon-sampling fraction of the detector. GEANT simulations of neutrino interactions in seawater produced by GENIE are used to study the effects in the 1 - 20 GeV range. It is found that fluctuations in the hadronic cascade in conjunction with the variation of the inelasticity y are most detrimental to the resolutions. The effect of limited photon sampling in the detector is of significantly less importance. These results will therefore also be applicable to similar detectors/media, such as those in ice.
△ Less
Submitted 19 May, 2017; v1 submitted 29 November, 2016;
originally announced December 2016.
-
Letter of Intent for KM3NeT 2.0
Authors:
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. Anassontzis,
M. Andre,
G. Androulakis,
M. Anghinolfi,
G. Anton,
M. Ardid,
T. Avgitas,
G. Barbarino,
E. Barbarito,
B. Baret,
J. Barrios-Martí,
B. Belhorma,
A. Belias,
E. Berbee,
A. van den Berg,
V. Bertin,
S. Beurthey,
V. van Beveren,
N. Beverini
, et al. (222 additional authors not shown)
Abstract:
The main objectives of the KM3NeT Collaboration are i) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ii) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: 1) The high-energy astrophysical neutrino signal reported by IceCube and 2) the sizable contribution of elect…
▽ More
The main objectives of the KM3NeT Collaboration are i) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ii) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: 1) The high-energy astrophysical neutrino signal reported by IceCube and 2) the sizable contribution of electron neutrinos to the third neutrino mass eigenstate as reported by Daya Bay, Reno and others. To meet these objectives, the KM3NeT Collaboration plans to build a new Research Infrastructure consisting of a network of deep-sea neutrino telescopes in the Mediterranean Sea. A phased and distributed implementation is pursued which maximises the access to regional funds, the availability of human resources and the synergetic opportunities for the earth and sea sciences community. Three suitable deep-sea sites are identified, namely off-shore Toulon (France), Capo Passero (Italy) and Pylos (Greece). The infrastructure will consist of three so-called building blocks. A building block comprises 115 strings, each string comprises 18 optical modules and each optical module comprises 31 photo-multiplier tubes. Each building block thus constitutes a 3-dimensional array of photo sensors that can be used to detect the Cherenkov light produced by relativistic particles emerging from neutrino interactions. Two building blocks will be configured to fully explore the IceCube signal with different methodology, improved resolution and complementary field of view, including the Galactic plane. One building block will be configured to precisely measure atmospheric neutrino oscillations.
△ Less
Submitted 26 July, 2016; v1 submitted 27 January, 2016;
originally announced January 2016.
-
The prototype detection unit of the KM3NeT detector
Authors:
KM3NeT Collaboration,
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
G. C. Androulakis,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
T. Avgitas,
K. Balasi,
H. Band,
G. Barbarino,
E. Barbarito,
F. Barbato,
B. Baret,
S. Baron,
J. Barrios,
A. Belias,
E. Berbee,
A. M. van den Berg
, et al. (224 additional authors not shown)
Abstract:
A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitt…
▽ More
A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitted by charged secondary particles emerging from neutrino interactions. This prototype string implements three optical modules with 31 photomultiplier tubes each. These optical modules were developed by the KM3NeT Collaboration to enhance the detection capability of neutrino interactions. The prototype detection unit was operated since its deployment in May 2014 until its decommissioning in July 2015. Reconstruction of the particle trajectories from the data requires a nanosecond accuracy in the time calibration. A procedure for relative time calibration of the photomultiplier tubes contained in each optical module is described. This procedure is based on the measured coincidences produced in the sea by the 40K background light and can easily be expanded to a detector with several thousands of optical modules. The time offsets between the different optical modules are obtained using LED nanobeacons mounted inside them. A set of data corresponding to 600 hours of livetime was analysed. The results show good agreement with Monte Carlo simulations of the expected optical background and the signal from atmospheric muons. An almost background-free sample of muons was selected by filtering the time correlated signals on all the three optical modules. The zenith angle of the selected muons was reconstructed with a precision of about 3°.
△ Less
Submitted 23 December, 2015; v1 submitted 6 October, 2015;
originally announced October 2015.
-
Time calibration with atmospheric muon tracks in the ANTARES neutrino telescope
Authors:
S. Adrián-Martínez,
A. Albert,
M. André,
G. Anton,
M. Ardid,
J. -J. Aubert,
B. Baret,
J. Barrios-Martí,
S. Basa,
V. Bertin,
S. Biagi,
C. Bogazzi,
R. Bormuth,
M. Bou-Cabo,
M. C. Bouwhuis,
R. Bruijn,
J. Brunner,
J. Busto,
A. Capone,
L. Caramete,
J. Carr,
T. Chiarusi,
M. Circella,
R. Coniglione,
H. Costantini
, et al. (105 additional authors not shown)
Abstract:
The ANTARES experiment consists of an array of photomultipliers distributed along 12 lines and located deep underwater in the Mediterranean Sea. It searches for astrophysical neutrinos collecting the Cherenkov light induced by the charged particles, mainly muons, produced in neutrino interactions around the detector. Since at energies of $\sim$10 TeV the muon and the incident neutrino are almost c…
▽ More
The ANTARES experiment consists of an array of photomultipliers distributed along 12 lines and located deep underwater in the Mediterranean Sea. It searches for astrophysical neutrinos collecting the Cherenkov light induced by the charged particles, mainly muons, produced in neutrino interactions around the detector. Since at energies of $\sim$10 TeV the muon and the incident neutrino are almost collinear, it is possible to use the ANTARES detector as a neutrino telescope and identify a source of neutrinos in the sky starting from a precise reconstruction of the muon trajectory. To get this result, the arrival times of the Cherenkov photons must be accurately measured. A to perform time calibrations with the precision required to have optimal performances of the instrument is described. The reconstructed tracks of the atmospheric muons in the ANTARES detector are used to determine the relative time offsets between photomultipliers. Currently, this method is used to obtain the time calibration constants for photomultipliers on different lines at a precision level of 0.5 ns. It has also been validated for calibrating photomultipliers on the same line, using a system of LEDs and laser light devices.
△ Less
Submitted 15 July, 2015;
originally announced July 2015.
-
Acoustic signal detection through the cross-correlation method in experiments with different signal to noise ratio and reverberation conditions
Authors:
S. Adrián-Martínez,
M. Ardid,
M. Bou-Cabo,
I. Felis,
C. Llorens,
J. A. Martínez-Mora,
M. Saldaña
Abstract:
The study and application of signal detection techniques based on cross-correlation method for acoustic transient signals in noisy and reverberant environments are presented. These techniques are shown to provide high signal to noise ratio, good signal discernment from very close echoes and accurate detection of signal arrival time. The proposed methodology has been tested on real data collected i…
▽ More
The study and application of signal detection techniques based on cross-correlation method for acoustic transient signals in noisy and reverberant environments are presented. These techniques are shown to provide high signal to noise ratio, good signal discernment from very close echoes and accurate detection of signal arrival time. The proposed methodology has been tested on real data collected in environments and conditions where its benefits can be shown. This work focuses on the acoustic detection applied to tasks of positioning in underwater structures and calibration such those as ANTARES and KM3NeT deep-sea neutrino telescopes, as well as, in particle detection through acoustic events for the COUPP/PICO detectors. Moreover, a method for obtaining the real amplitude of the signal in time (voltage) by using cross correlation has been developed and tested and is described in this work.
△ Less
Submitted 17 February, 2015;
originally announced February 2015.
-
Deep sea tests of a prototype of the KM3NeT digital optical module
Authors:
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
R. de Asmundis,
K. Balasi,
H. Band,
G. Barbarino,
E. Barbarito,
F. Barbato,
B. Baret,
S. Baron,
A. Belias,
E. Berbee,
A. M. van den Berg,
A. Berkien,
V. Bertin,
S. Beurthey
, et al. (225 additional authors not shown)
Abstract:
The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on th…
▽ More
The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same $^{40}$K decay and the localization bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions.
△ Less
Submitted 16 May, 2014; v1 submitted 5 May, 2014;
originally announced May 2014.
-
Development of an acoustic transceiver for the KM3NeT positioning system
Authors:
G. Larosa,
M. Ardid,
C. D. Llorens,
M. Bou-Cabo,
J. A. Martínez-Mora,
S. Adrián-Martínez
Abstract:
In this paper we describe an acoustic transceiver developed for the KM3NeT positioning system. The acoustic transceiver is composed of a commercial free flooded transducer, which works mainly in the 20-40 kHz frequency range and withstands high pressures (up to 500 bars). A sound emission board was developed that is adapted to the characteristics of the transducer and meets all requirements: low p…
▽ More
In this paper we describe an acoustic transceiver developed for the KM3NeT positioning system. The acoustic transceiver is composed of a commercial free flooded transducer, which works mainly in the 20-40 kHz frequency range and withstands high pressures (up to 500 bars). A sound emission board was developed that is adapted to the characteristics of the transducer and meets all requirements: low power consumption, high intensity of emission, low intrinsic noise, arbitrary signals for emission and the capacity of acquiring the receiving signals with very good timing precision. The results of the different tests made with the transceiver in the laboratory and shallow sea water are described, as well as, the activities for its integration in the Instrumentation Line of the ANTARES neutrino telescope and in a NEMO tower for the in situ tests.
△ Less
Submitted 30 October, 2012;
originally announced October 2012.
-
A compact acoustic calibrator for ultra-high energy neutrino detection
Authors:
S. Adrián-Martínez,
M. Ardid,
M. Bou-Cabo,
G. Larosa,
C. D Llorens,
J. A. Martínez-Mora
Abstract:
With the aim to optimize and test the method of acoustic detection of ultra-high energy neutrinos in underwater telescopes a compact acoustic transmitter array has been developed. The acoustic parametric effect is used to reproduce the acoustic signature of an ultra-high-energy neutrino interaction. Different reseach and development studies are presented in order to show the viability of the param…
▽ More
With the aim to optimize and test the method of acoustic detection of ultra-high energy neutrinos in underwater telescopes a compact acoustic transmitter array has been developed. The acoustic parametric effect is used to reproduce the acoustic signature of an ultra-high-energy neutrino interaction. Different reseach and development studies are presented in order to show the viability of the parametric sources technique to deal with the difficulties of the acoustic signal generation: a very directive transient bipolar signal with pancake directivity. The design, construction and characterization of the prototype are described, including simulation of the propagation of an experimental signal, measured in a pool, over a distance of 1 km. Following these studies, next steps will be testing the device in situ, in underwater neutrino telescope, or from a vessel in a sea campaign.
△ Less
Submitted 29 October, 2012;
originally announced October 2012.
-
Development of an acoustic transceiver for positioning systems in Underwater Neutrino Telescopes
Authors:
Giuseppina Larosa,
Miguel Ardid,
Carlos D. Llorens,
Manuel Bou-Cabo,
Juan A. Martínez-Mora,
Silvia Adrián-Martínez
Abstract:
In this paper, we present the acoustic transceiver developed for the positioning system in underwater neutrino telescopes. These infrastructures are not completely rigid and need a positioning system in order to monitor the position of the optical sensors of the telescope which have some degree of motion due to sea currents. To have a highly reliable and versatile system in the infrastructure, the…
▽ More
In this paper, we present the acoustic transceiver developed for the positioning system in underwater neutrino telescopes. These infrastructures are not completely rigid and need a positioning system in order to monitor the position of the optical sensors of the telescope which have some degree of motion due to sea currents. To have a highly reliable and versatile system in the infrastructure, the transceiver has the requirements of reduced cost, low power consumption, high intensity for emission, low intrinsic noise, arbitrary signals for emission and the capacity of acquiring and processing the received signal on the board. The solution proposed and presented here consists of an acoustic transducer that works in the 20-40 kHz region and withstands high pressures (up to 500 bars). The electronic-board can be configured from shore and is able to feed the transducer with arbitrary signals and to control the transmitted and received signals with very good timing precision. The results of the different tests done on the transceiver in the laboratory are described here, as well as the change implemented for its integration in the Instrumentation Line of ANTARES for the in situ tests. We consider the transceiver design is so versatile that it may be used in other kinds of marine positioning systems, alone or combined with other marine systems, or integrated in different Earth-Sea Observatories, where the localization of the sensors is an issue.
△ Less
Submitted 4 April, 2012;
originally announced April 2012.
-
Acoustic Transmitters for Underwater Neutrino Telescopes
Authors:
Miguel Ardid,
Juan A. Martínez-Mora,
Manuel Bou-Cabo,
Giuseppina Larosa,
Silvia Adrián-Martínez,
Carlos D. Llorens
Abstract:
In this paper acoustic transmitters that were developed for use in underwater neutrino telescopes are presented. Firstly, an acoustic transceiver has been developed as part of the acoustic positioning system of neutrino telescopes. These infrastructures are not completely rigid and require a positioning system in order to monitor the position of the optical sensors which move due to sea currents.…
▽ More
In this paper acoustic transmitters that were developed for use in underwater neutrino telescopes are presented. Firstly, an acoustic transceiver has been developed as part of the acoustic positioning system of neutrino telescopes. These infrastructures are not completely rigid and require a positioning system in order to monitor the position of the optical sensors which move due to sea currents. To guarantee a reliable and versatile system, the transceiver has the requirements of reduced cost, low power consumption, high pressure withstanding (up to 500 bars), high intensity for emission, low intrinsic noise, arbitrary signals for emission and the capacity of acquiring and processing received signals. Secondly, a compact acoustic transmitter array has been developed for the calibration of acoustic neutrino detection systems. The array is able to mimic the signature of ultra-high-energy neutrino interaction in emission directivity and signal shape. The technique of parametric acoustic sources has been used to achieve the proposed aim. The developed compact array has practical features such as easy manageability and operation. The prototype designs and the results of different tests are described. The techniques applied for these two acoustic systems are so powerful and versatile that may be of interest in other marine applications using acoustic transmitters.
△ Less
Submitted 3 April, 2012;
originally announced April 2012.
-
The Sound Emission Board of the KM3NeT Acoustic Positioning System
Authors:
C. D. Llorens,
M. Ardid,
T. Sogorb,
M. Bou--Cabo,
J. A. Martínez-Mora,
G. Larosa,
S. Adrián-Martínez
Abstract:
We describe the sound emission board proposed for installation in the acoustic positioning system of the future KM3NeT underwater neutrino telescope. The KM3NeT European consortium aims to build a multi-cubic kilometre underwater neutrino telescope in the deep Mediterranean Sea. In this kind of telescope the mechanical structures holding the optical sensors, which detect the Cherenkov radiation pr…
▽ More
We describe the sound emission board proposed for installation in the acoustic positioning system of the future KM3NeT underwater neutrino telescope. The KM3NeT European consortium aims to build a multi-cubic kilometre underwater neutrino telescope in the deep Mediterranean Sea. In this kind of telescope the mechanical structures holding the optical sensors, which detect the Cherenkov radiation produced by muons emanating from neutrino interactions, are not completely rigid and can move up to dozens of meters in undersea currents. Knowledge of the position of the optical sensors to an accuracy of about 10 cm is needed for adequate muon track reconstruction. A positioning system based on the acoustic triangulation of sound transit time differences between fixed seabed emitters and receiving hydrophones attached to the kilometre-scale vertical flexible structures carrying the optical sensors is being developed. In this paper, we describe the sound emission board developed in the framework of KM3NeT project, which is totally adapted to the chosen FFR SX30 ultrasonic transducer and fulfils the requirements imposed by the collaboration in terms of cost, high reliability, low power consumption, high acoustic emission power for short signals, low intrinsic noise and capacity to use arbitrary signals in emission mode.
△ Less
Submitted 5 January, 2012;
originally announced January 2012.
-
Development of a compact transmitter array for the acoustic neutrino detection calibration
Authors:
S. Adrián-Martínez,
M. Ardid,
M. Bou-Cabo,
G. Larosa,
C. D. Llorens,
J. A. Martínez-Mora
Abstract:
Parametric acoustic sources technique has been widely used in several fields of acoustics, especially in underwater acoustics with the aim to obtain very directive transducers. In this paper we present different studies and developments done during last years to develop a compact acoustic calibrator that allows emitting acoustic neutrino like signal with the goal to calibrate arrays of acoustic re…
▽ More
Parametric acoustic sources technique has been widely used in several fields of acoustics, especially in underwater acoustics with the aim to obtain very directive transducers. In this paper we present different studies and developments done during last years to develop a compact acoustic calibrator that allows emitting acoustic neutrino like signal with the goal to calibrate arrays of acoustic receiver sensors to detect ultra-high energy neutrinos.
△ Less
Submitted 12 December, 2011;
originally announced December 2011.
-
Acoustic and optical variations during rapid downward motion episodes in the deep north-western Mediterranean Sea
Authors:
H. van Haren,
I. Taupier-Letage,
J. A. Aguilar,
A. Albert,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
A. C. Assis Jesus,
T. Astraatmadja,
J. -J. Aubert,
R. Auer,
B. Baret,
S. Basa,
M. Bazzotti,
V. Bertin,
S. Biagi,
C. Bigongiari,
M. Bou-Cabof,
M. C. Bouwhuis,
A. Brown,
J. Brunner,
J. Busto,
F. Camarena,
A. Capone
, et al. (116 additional authors not shown)
Abstract:
An Acoustic Doppler Current Profiler (ADCP) was moored at the deep-sea site of the ANTARES neutrino telescope near Toulon, France, thus providing a unique opportunity to compare high-resolution acoustic and optical observations between 70 and 170 m above the sea bed at 2475 m. The ADCP measured downward vertical currents of magnitudes up to 0.03 m s-1 in late winter and early spring 2006. In the s…
▽ More
An Acoustic Doppler Current Profiler (ADCP) was moored at the deep-sea site of the ANTARES neutrino telescope near Toulon, France, thus providing a unique opportunity to compare high-resolution acoustic and optical observations between 70 and 170 m above the sea bed at 2475 m. The ADCP measured downward vertical currents of magnitudes up to 0.03 m s-1 in late winter and early spring 2006. In the same period, observations were made of enhanced levels of acoustic reflection, interpreted as suspended particles including zooplankton, by a factor of about 10 and of horizontal currents reaching 0.35 m s-1. These observations coincided with high light levels detected by the telescope, interpreted as increased bioluminescence. During winter 2006 deep dense-water formation occurred in the Ligurian subbasin, thus providing a possible explanation for these observations. However, the 10-20 days quasi-periodic episodes of high levels of acoustic reflection, light and large vertical currents continuing into the summer are not direct evidence of this process. It is hypothesized that the main process allowing for suspended material to be moved vertically later in the year is local advection, linked with topographic boundary current instabilities along the rim of the 'Northern Current'.
△ Less
Submitted 28 November, 2011;
originally announced November 2011.
-
A Fast Algorithm for Muon Track Reconstruction and its Application to the ANTARES Neutrino Telescope
Authors:
ANTARES collaboration,
J. A. Aguilar,
I. Al Samarai,
A. Albert,
M. Andre,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
A. C. Assis Jesus,
T. Astraatmadja,
J-J. Aubert,
R. Auer,
B. Baret,
S. Basa,
M. Bazzotti,
V. Bertin,
S. Biagi,
C. Bigongiari,
C. Bogazzi,
M. Bou-Cabo,
M. C. Bouwhuis,
A. M. Brown,
J. Brunner,
J. Busto
, et al. (118 additional authors not shown)
Abstract:
An algorithm is presented, that provides a fast and robust reconstruction of neutrino induced upward-going muons and a discrimination of these events from downward-going atmospheric muon background in data collected by the ANTARES neutrino telescope. The algorithm consists of a hit merging and hit selection procedure followed by fitting steps for a track hypothesis and a point-like light source. I…
▽ More
An algorithm is presented, that provides a fast and robust reconstruction of neutrino induced upward-going muons and a discrimination of these events from downward-going atmospheric muon background in data collected by the ANTARES neutrino telescope. The algorithm consists of a hit merging and hit selection procedure followed by fitting steps for a track hypothesis and a point-like light source. It is particularly well-suited for real time applications such as online monitoring and fast triggering of optical follow-up observations for multi-messenger studies. The performance of the algorithm is evaluated with Monte Carlo simulations and various distributions are compared with that obtained in ANTARES data.
△ Less
Submitted 20 May, 2011;
originally announced May 2011.
-
R&D studies for the development of a compact transmitter able to mimic the acoustic signature of a UHE neutrino interaction
Authors:
M. Ardid,
S. Adrián,
M. Bou-Cabo,
G. Larosa,
J. A. Martinez-Mora,
V. Espinosa,
F. Camarena,
M. Ferri
Abstract:
Calibration of acoustic neutrino telescopes with neutrino-like signals is an essential aspect to evaluate the feasibility of the technique and to know the efficiency of the detectors. However, it is not straightforward to have acoustic transmitters that, on one hand, are able to mimic the signature of a UHE neutrino interaction, that is, a bipolar acoustic pulse with the 'pancake' directivity, a…
▽ More
Calibration of acoustic neutrino telescopes with neutrino-like signals is an essential aspect to evaluate the feasibility of the technique and to know the efficiency of the detectors. However, it is not straightforward to have acoustic transmitters that, on one hand, are able to mimic the signature of a UHE neutrino interaction, that is, a bipolar acoustic pulse with the 'pancake' directivity, and, on the other hand, fulfill practical issues such as ease of deployment and operation. This is a non-trivial problem since it requires directive transducer with cylindrical symmetry for a broadband frequency range. Classical solutions using linear arrays of acoustic transducers result in long arrays with many elements, which increase the cost and the complexity for deployment and operation. In this paper we present the extension of our previous R&D studies using the parametric acoustic source technique by dealing with the cylindrical symmetry, and demonstrating that it is possible to use this technique for having a compact solution that could be much more easily included in neutrino telescope infrastructures or used in specific sea campaigns for calibration.
△ Less
Submitted 18 January, 2011; v1 submitted 17 January, 2011;
originally announced January 2011.
-
Time Calibration of the ANTARES Neutrino Telescope
Authors:
The ANTARES Collaboration,
J. A. Aguilar,
I. Al Samarai,
A. Albert,
M. André,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
A. C. Assis Jesus,
T. Astraatmadja,
J. J. Aubert,
R. Auer,
B. Baret,
S. Basa,
M. Bazzotti,
V. Bertin,
S. Biagi,
C. Bigongiari,
M. Bou-Cabo,
M. C. Bouwhuis,
A. M. Brown,
J. Brunner,
J. Busto,
F. Camarena
, et al. (113 additional authors not shown)
Abstract:
The ANTARES deep-sea neutrino telescope comprises a three-dimensional array of photomultipliers to detect the Cherenkov light induced by upgoing relativistic charged particles originating from neutrino interactions in the vicinity of the detector. The large scattering length of light in the deep sea facilitates an angular resolution of a few tenths of a degree for neutrino energies exceeding 10 Te…
▽ More
The ANTARES deep-sea neutrino telescope comprises a three-dimensional array of photomultipliers to detect the Cherenkov light induced by upgoing relativistic charged particles originating from neutrino interactions in the vicinity of the detector. The large scattering length of light in the deep sea facilitates an angular resolution of a few tenths of a degree for neutrino energies exceeding 10 TeV. In order to achieve this optimal performance, the time calibration procedures should ensure a relative time calibration between the photomultipliers at the level of about 1ns. The methods developed to attain this level of precision are described.
△ Less
Submitted 10 December, 2010;
originally announced December 2010.
-
Self-organization of ultrasound in viscous fluids
Authors:
V. J. Sanchez-Morcillo,
J. Martinez-Mora,
I. Perez-Arjona,
V. Espinosa,
P. Alonso
Abstract:
We report the theoretical and experimental demonstration of pattern formation in acoustics. The system is an acoustic resonator containing a viscous fluid. When the system is driven by an external periodic force, the ultrasonic field inside the cavity experiences different pattern-forming instabilities leading to the emergence of periodic structures. The system is also shown to possess bistable re…
▽ More
We report the theoretical and experimental demonstration of pattern formation in acoustics. The system is an acoustic resonator containing a viscous fluid. When the system is driven by an external periodic force, the ultrasonic field inside the cavity experiences different pattern-forming instabilities leading to the emergence of periodic structures. The system is also shown to possess bistable regimes, in which localized states of the ultrasonic field develop. The thermal nonlinearity in the viscous fluid, together with the far-from-equilibrium conditions, are is the responsible of the observed effects.
△ Less
Submitted 11 June, 2010;
originally announced June 2010.
