Showing 1–35 of 35 results for author: Martín, V

The Linear Collider Facility (LCF) at CERN

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S Ampudia Castelazo, D. Angal-Kalinin, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, D. Attié, J. L. Avila-Jimenez, H. Baer, Y. Bai, C. Balazs, T Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive, S. Belomestnykh, Y. Benhammou, J. Berenguer-Antequera, M. Berger , et al. (359 additional authors not shown)

Abstract: In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive pr… ▽ More In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive programme to study the Higgs boson and its closest relatives with high precision requires data at centre-of-mass energies from the Z pole to at least 1 TeV. It should include measurements of the Higgs boson in both major production mechanisms, ee -> ZH and ee -> vvH, precision measurements of gauge boson interactions as well as of the W boson, Higgs boson and top-quark masses, measurement of the top-quark Yukawa coupling through ee ->ttH, measurement of the Higgs boson self-coupling through HH production, and precision measurements of the electroweak couplings of the top quark. In addition, ee collisions offer discovery potential for new particles complementary to HL-LHC. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submission to the EPPSU

A Linear Collider Vision for the Future of Particle Physics

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S Ampudia Castelazo, D. Angal-Kalinin, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, A. Aryshev, S. Asai, D. Attié, J. L. Avila-Jimenez, H. Baer, J. A. Bagger, Y. Bai, I. R. Bailey, C. Balazs, T Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive , et al. (391 additional authors not shown)

Abstract: In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much… ▽ More In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much higher energies and/or luminosities. In addition, we will discuss detectors and alternative collider modes, as well as opportunities for beyond-collider experiments and R\&D facilities as part of a linear collider facility (LCF). The material of this paper will support all plans for $e^+e^-$ linear colliders and additional opportunities they offer, independently of technology choice or proposed site, as well as R\&D for advanced accelerator technologies. This joint perspective on the physics goals, early technologies and upgrade strategies has been developed by the LCVision team based on an initial discussion at LCWS2024 in Tokyo and a follow-up at the LCVision Community Event at CERN in January 2025. It heavily builds on decades of achievements of the global linear collider community, in particular in the context of CLIC and ILC. △ Less

Submitted 31 March, 2025; v1 submitted 25 March, 2025; originally announced March 2025.

Comments: Community document for EPPSU, will be updated several times

Proposal of the KOTO II experiment

Authors: Jung Keun Ahn, Antonella Antonelli, Giuseppina Anzivino, Emile Augustine, Laura Bandiera, Jianming Bian, Francesco Brizioli, Stefano De Capua, Gabriella Carini, Veronika Chobanova, Giancarlo D'Ambrosio, John Bourke Dainton, Babette Dőbrich, John Fry, Alberto Gianoli, Alexander Glazov, Mario Gonzalez, Martin Gorbahn, Evgueni Goudzovski, Mei Homma, Yee B. Hsiung, Tomáš Husek, David Hutchcroft, Abhishek Iyer, Roger William Lewis Jones , et al. (57 additional authors not shown)

Abstract: The KOTO II experiment is proposed to measure the branching ratio of the decay $K_L\toπ^0ν\barν$ at J-PARC. With a beamline to extract long-lived neutral kaons at 5 degrees from a production target, the single event sensitivity of the decay is $8.5\times 10^{-13}$, which is much smaller than the Standard Model prediction $3\times 10^{-11}$. This allows searches for new physics beyond the Standard… ▽ More The KOTO II experiment is proposed to measure the branching ratio of the decay $K_L\toπ^0ν\barν$ at J-PARC. With a beamline to extract long-lived neutral kaons at 5 degrees from a production target, the single event sensitivity of the decay is $8.5\times 10^{-13}$, which is much smaller than the Standard Model prediction $3\times 10^{-11}$. This allows searches for new physics beyond the Standard Model and the first discovery of the decay with a significance exceeding $5σ$. As the only experiment proposed in the world dedicated to rare kaon decays, KOTO II will be indispensable in the quest for a complete understanding of flavor dynamics in the quark sector. Moreover, by combining efforts from the kaon community worldwide, we plan to develop the KOTO II detector further and expand the physics reach of the experiment to include measurements of the branching ratio of the $K_L\toπ^0\ell^+\ell^-$ decays, studies of other $K_L$ decays, and searches for dark photons, axions, and axion-like particles. KOTO II will therefore obtain a comprehensive understanding of $K_L$ decays, providing further constraints on new physics scenarios with existing $K^+$ results. △ Less

Submitted 22 January, 2025; originally announced January 2025.

Comments: Submitted to the J-PARC PAC. arXiv admin note: substantial text overlap with arXiv:2110.04462

Towards Efficient Modelling of String Dynamics: A Comparison of State Space and Koopman based Deep Learning Methods

Authors: Rodrigo Diaz, Carlos De La Vega Martin, Mark Sandler

Abstract: This paper presents an examination of State Space Models (SSM) and Koopman-based deep learning methods for modelling the dynamics of both linear and non-linear stiff strings. Through experiments with datasets generated under different initial conditions and sample rates, we assess the capacity of these models to accurately model the complex behaviours observed in string dynamics. Our findings indi… ▽ More This paper presents an examination of State Space Models (SSM) and Koopman-based deep learning methods for modelling the dynamics of both linear and non-linear stiff strings. Through experiments with datasets generated under different initial conditions and sample rates, we assess the capacity of these models to accurately model the complex behaviours observed in string dynamics. Our findings indicate that our proposed Koopman-based model performs as well as or better than other existing approaches in non-linear cases for long-sequence modelling. We inform the design of these architectures with the structure of the problems at hand. Although challenges remain in extending model predictions beyond the training horizon (i.e., extrapolation), the focus of our investigation lies in the models' ability to generalise across different initial conditions within the training time interval. This research contributes insights into the physical modelling of dynamical systems (in particular those addressing musical acoustics) by offering a comparative overview of these and previous methods and introducing innovative strategies for model improvement. Our results highlight the efficacy of these models in simulating non-linear dynamics and emphasise their wide-ranging applicability in accurately modelling dynamical systems over extended sequences. △ Less

Submitted 29 August, 2024; originally announced August 2024.

Comments: Accepted to DAFx2024

Heavy-element damage seeding in proteins under XFEL illumination

Authors: Spencer K. Passmore, Alaric L. Sanders, Andrew V. Martin, Harry M. Quiney

Abstract: Serial femtosecond X-ray crystallography (SFX) captures the structure and dynamics of biological macromolecules with high spatial and temporal resolutions. The ultrashort pulse produced by an X-ray free electron laser (XFEL) 'outruns' much of the radiation damage that impairs conventional crystallography. However, the rapid onset of 'electronic damage' due to electron ionization limits this benefi… ▽ More Serial femtosecond X-ray crystallography (SFX) captures the structure and dynamics of biological macromolecules with high spatial and temporal resolutions. The ultrashort pulse produced by an X-ray free electron laser (XFEL) 'outruns' much of the radiation damage that impairs conventional crystallography. However, the rapid onset of 'electronic damage' due to electron ionization limits this benefit. Here, we distinguish the influence of different atomic species on the electronic damage to protein crystals in SFX by employing a plasma code that tracks the unbound electrons as a continuous energy distribution. The simulations show that trace quantities of heavy atoms ($Z > 10$) contribute a substantial proportion of global radiation damage by inducing electron ionization processes that are highly damaging on the XFEL pulse timescale. Native sulfur atoms have a considerable effect on damage-induced noise. Likewise, proteins suffer less damage when the crystal solvent contains lower concentrations of heavy elements. The proximity of the X-ray energy to a heavy-element absorption edge has a strong and non-trivial influence on the damage induced in these models. In one representative protein (lysozyme substituted with selenomethionine), adjusting the X-ray energy from 14 keV to 12 keV is as effective at reducing the ionization of light atoms as compressing the pulse width from 50 fs to 5 fs. These results indicate that relatively small quantities of heavy elements can substantially affect global radiation damage in the XFEL regime. △ Less

Submitted 29 October, 2024; v1 submitted 16 May, 2024; originally announced May 2024.

A case study of university student networks and the COVID-19 pandemic using a social network analysis approach in halls of residence

Authors: José Alberto Benítez-Andrades, Tania Fernández-Villa, Carmen Benavides, Andrea Gayubo-Serrenes, Vicente Martín, Pilar Marqués-Sánchez

Abstract: The COVID-19 pandemic has meant that young university students have had to adapt their learning and have a reduced relational context. Adversity contexts build models of human behaviour based on relationships. However, there is a lack of studies that analyse the behaviour of university students based on their social structure in the context of a pandemic. This information could be useful in making… ▽ More The COVID-19 pandemic has meant that young university students have had to adapt their learning and have a reduced relational context. Adversity contexts build models of human behaviour based on relationships. However, there is a lack of studies that analyse the behaviour of university students based on their social structure in the context of a pandemic. This information could be useful in making decisions on how to plan collective responses to adversities. The Social Network Analysis (SNA) method has been chosen to address this structural perspective. The aim of our research is to describe the structural behaviour of students in university residences during the COVID-19 pandemic with a more in-depth analysis of student leaders. A descriptive cross-sectional study was carried out at one Spanish Public University, León, from 23th October 2020 to 20th November 2020. The participation was of 93 students, from four halls of residence. The data were collected from a database created specifically at the university to "track" contacts in the COVID-19 pandemic, SiVeUle. We applied the SNA for the analysis of the data. The leadership on the university residence was measured using centrality measures. The top leaders were analyzed using the Egonetwork and an assessment of the key players. Students with higher social reputations experience higher levels of pandemic contagion in relation to COVID-19 infection. The results were statistically significant between the centrality in the network and the results of the COVID-19 infection. The most leading students showed a high degree of Betweenness, and three students had the key player structure in the network. Networking behaviour of university students in halls of residence could be related to contagion in the COVID-19 pandemic. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Journal ref: Scientific Reports volume 11, Article number: 14877 (2021)

The pypadf package: computing the pair-angle distribution function from fluctuation scattering data

Authors: Andrew V. Martin, Patrick Adams, Jack Binns

Abstract: The pair-angle distribution function (PADF) is a three- and four-atom correlation function that can characterise the local angular structure of disordered materials, particles or nanocrystalline materials. The PADF can be measured by x-ray or electron fluctuation diffraction experiments, which can be collected by scanning a small beam across a structurally disordered sample or flowing a sample acr… ▽ More The pair-angle distribution function (PADF) is a three- and four-atom correlation function that can characterise the local angular structure of disordered materials, particles or nanocrystalline materials. The PADF can be measured by x-ray or electron fluctuation diffraction experiments, which can be collected by scanning a small beam across a structurally disordered sample or flowing a sample across the beam path. It is a natural generalisation of the established pair-distribution methods, which do not provide angular information. This software package provides tools to calculate the PADF from from fluctuation diffraction data. The package includes tools for calculating the intensity correlation function, which is a necessary step in the PADF calculation and also the basis for other fluctuation scattering techniques. △ Less

Submitted 22 August, 2023; originally announced September 2023.

Comments: 21 pages, 3 figures

Transforming U.S. agriculture with crushed rock for CO$_2$ sequestration and increased production

Authors: David J. Beerling, Euripides P. Kantzas, Maria Val Martin, Mark R. Lomas, Lyla L. Taylor, Shuang Zhang, Yoshiki Kanzaki, Christopher T. Reinhard, Noah J. Planavsky, Rafael M. Eufrasio, Phil Renforth, Jean-Francois Mecure, Hector Pollitt, Philip B. Holden, Neil R. Edwards, Lenny Koh, Dimitar Z. Epihov, Adam Wolf, James E. Hansen, Nick F. Pidgeon, Steven A. Banwart

Abstract: Enhanced weathering (EW) is a promising modification to current agricultural practices that uses crushed silicate rocks to drive carbon dioxide removal (CDR). If widely adopted on farmlands, it could help achieve net-zero or negative emissions by 2050. We report detailed state-level analysis indicating EW deployed on agricultural land could sequester 0.23-0.38 Gt CO$_2$ yr$^{-1}$ and meet 36-60 %… ▽ More Enhanced weathering (EW) is a promising modification to current agricultural practices that uses crushed silicate rocks to drive carbon dioxide removal (CDR). If widely adopted on farmlands, it could help achieve net-zero or negative emissions by 2050. We report detailed state-level analysis indicating EW deployed on agricultural land could sequester 0.23-0.38 Gt CO$_2$ yr$^{-1}$ and meet 36-60 % of U.S. technological CDR goals. Average CDR costs vary between state, being highest in the first decades before declining to a range of $\sim\$$100-150 tCO$_2{}^{-1}$ by 2050, including for three states (Iowa, Illinois, and Indiana) that contribute most to total national CDR. We identify multiple electoral swing states as being essential for scaling EW that are also key beneficiaries of the practice, indicating the need for strong bipartisan support of this technology. Assessment the geochemical capacity of rivers and oceans to carry dissolved EW products from soil drainage suggests EW provides secure long-term CO$_2$ removal on intergenerational time scales. We additionally forecast mitigation of ground-level ozone increases expected with future climate change, as an indirect benefit of EW, and consequent avoidance of yield reductions. Our assessment supports EW as a practical innovation for leveraging agriculture to enable positive action on climate change with adherence to federal environmental justice priorities. However, implementing a stage-gating framework as upscaling proceeds to safeguard against environmental and biodiversity concerns will be essential. △ Less

Submitted 8 August, 2023; originally announced August 2023.

Enhanced weathering in the U.S. Corn Belt delivers carbon removal with agronomic benefits

Authors: David J. Beerling, Dimitar Z. Epihov, Ilsa B. Kantola, Michael D. Masters, Tom Reershemius, Noah J. Planavsky, Christopher T. Reinhard, Jacob S. Jordan, Sarah J. Thorne, James Weber, Maria Val Martin, Robert P. Freckleton, Sue E. Hartley, Rachael H. James, Christopher R. Pearce, Evan H. DeLucia, Steven A. Banwart

Abstract: Enhanced weathering (EW) with crushed basalt on farmlands is a promising scalable atmospheric carbon dioxide removal strategy that urgently requires performance assessment with commercial farming practices. Our large-scale replicated EW field trial in the heart of the U.S. Corn Belt shows cumulative time-integrated carbon sequestration of 15.4 +/- 4.1 t CO2 ha-1 over four years, with additional em… ▽ More Enhanced weathering (EW) with crushed basalt on farmlands is a promising scalable atmospheric carbon dioxide removal strategy that urgently requires performance assessment with commercial farming practices. Our large-scale replicated EW field trial in the heart of the U.S. Corn Belt shows cumulative time-integrated carbon sequestration of 15.4 +/- 4.1 t CO2 ha-1 over four years, with additional emissions mitigation of ~0.1 - 0.4 t CO2,e ha-1 yr-1 for soil nitrous oxide, a potent long-lived greenhouse gas. Maize and soybean yields increased 12-16% with EW following improved soil fertility, decreased soil acidification, and upregulation of root nutrient transport genes. Our findings suggest that widespread adoption of EW across farming sectors has the potential to contribute significantly to net-zero greenhouse gas emissions goals and global food and soil security. △ Less

Submitted 6 July, 2023; originally announced July 2023.

Teaching quantum communications through a hands-on laboratory

Authors: Alberto Sebastián-Lombraña, Laura Ortiz, Juan P. Brito, Jaime Sáez de Buruaga, Rafael J. Vicente, Ruben B. Mendez, Rafael Artiñano, Vicente Martín

Abstract: Teaching quantum communication is a challenging task when involving different technical and engineering backgrounds. The use of an approach that exploits the knowledge of these profiles, as well as other technological resources available for demonstrations or exercises, enhances this teaching. This paper presents as an example the "Quantum Communications Lab" that took place at the 6th INFIERI Sum… ▽ More Teaching quantum communication is a challenging task when involving different technical and engineering backgrounds. The use of an approach that exploits the knowledge of these profiles, as well as other technological resources available for demonstrations or exercises, enhances this teaching. This paper presents as an example the "Quantum Communications Lab" that took place at the 6th INFIERI Summer School in 2021. In this lab, the access to the Madrid Quantum Communication Infrastructure (MadQCI) was an important resource available. △ Less

Submitted 3 May, 2023; v1 submitted 1 March, 2023; originally announced March 2023.

Comments: Accepted for publication in JINST, 12 pages

Journal ref: Jour.Instrumentation 18 (2023) C03026

STE-QUEST -- Space Time Explorer and QUantum Equivalence principle Space Test: The 2022 medium-class mission concept

Authors: Naceur Gaaloul, Holger Ahlers, Leonardo Badurina, Angelo Bassi, Baptiste Battelier, Quentin Beaufils, Kai Bongs, Philippe Bouyer, Claus Braxmaier, Oliver Buchmueller, Matteo Carlesso, Eric Charron, Maria Luisa Chiofalo, Robin Corgier, Sandro Donadi, Fabien Droz, John Ellis, Frédéric Estève, Enno Giese, Jens Grosse, Aurélien Hees, Thomas A. Hensel, Waldemar Herr, Philippe Jetzer, Gina Kleinsteinberg , et al. (23 additional authors not shown)

Abstract: Space-borne quantum technologies, particularly those based on atom interferometry, are heralding a new era of strategic and robust space exploration. The unique conditions of space, characterized by low noise and low gravity environments, open up diverse possibilities for applications ranging from precise time and frequency transfer to Earth Observation and the search of new Physics. In this paper… ▽ More Space-borne quantum technologies, particularly those based on atom interferometry, are heralding a new era of strategic and robust space exploration. The unique conditions of space, characterized by low noise and low gravity environments, open up diverse possibilities for applications ranging from precise time and frequency transfer to Earth Observation and the search of new Physics. In this paper, we summarise the M-class mission proposal in response to the 2022 call in ESA's science program: Space-Time Explorer and Quantum Equivalence Principle Space Test (STE-QUEST). It consists in a satellite mission featuring a dual-species atom interferometer operating over extended durations. This mission aims to tackle three of the most fundamental questions in Physics: (i) testing the universality of free fall with an accuracy better than one part in $10^{-17}$, (ii) exploring various forms of Ultra-Light Dark Matter, and (iii) scrutinizing the foundations of Quantum Mechanics. △ Less

Submitted 19 May, 2025; v1 submitted 28 November, 2022; originally announced November 2022.

Comments: As submitted to the M7 call in July 2022, except updated for the recent (Sept. 2022) MICROSCOPE results, and findings presented in arXiv:2310.04212; reformatted for journal publication

The International Linear Collider: Report to Snowmass 2021

Authors: Alexander Aryshev, Ties Behnke, Mikael Berggren, James Brau, Nathaniel Craig, Ayres Freitas, Frank Gaede, Spencer Gessner, Stefania Gori, Christophe Grojean, Sven Heinemeyer, Daniel Jeans, Katja Kruger, Benno List, Jenny List, Zhen Liu, Shinichiro Michizono, David W. Miller, Ian Moult, Hitoshi Murayama, Tatsuya Nakada, Emilio Nanni, Mihoko Nojiri, Hasan Padamsee, Maxim Perelstein , et al. (487 additional authors not shown)

Abstract: The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu… ▽ More The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community. △ Less

Submitted 16 January, 2023; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 356 pages, Large pdf file (40 MB) submitted to Snowmass 2021; v2 references to Snowmass contributions added, additional authors; v3 references added, some updates, additional authors

Report number: DESY-22-045, IFT--UAM/CSIC--22-028, KEK Preprint 2021-61, PNNL-SA-160884, SLAC-PUB-17662

Towards European Standards for Quantum Technologies

Authors: O. van Deventer, N. Spethmann, M. Loeffler, M. Amoretti, R. van den Brink, N. Bruno, P. Comi, N. Farrugia, M. Gramegna, B. Kassenberg, W. Kozlowski, T. Länger, T. Lindstrom, V. Martin, N. Neumann, H. Papadopoulos, S. Pascazio, M. Peev, R. Pitwon, M. A. Rol, P. Traina, P. Venderbosch, F. K. Wilhelm-Mauch, A. Jenet

Abstract: The Second Quantum Revolution facilitates the engineering of new classes of sensors, communication technologies, and computers with unprecedented capabilities. Supply chains for quantum technologies are emerging, some focussed on commercially available components for enabling technologies and/or quantum-technologies research infrastructures, others with already higher technology-readiness levels,… ▽ More The Second Quantum Revolution facilitates the engineering of new classes of sensors, communication technologies, and computers with unprecedented capabilities. Supply chains for quantum technologies are emerging, some focussed on commercially available components for enabling technologies and/or quantum-technologies research infrastructures, others with already higher technology-readiness levels, near to the market. In 2018, the European Commission has launched its large-scale and long-term Quantum Flagship research initiative to support and foster the creation and development of a competitive European quantum technologies industry, as well as the consolidation and expansion of leadership and excellence in European quantum technology research. One of the measures to achieve an accelerated development and uptake has been identified by the Quantum Flagship in its Strategic Research Agenda: the promotion of coordinated, dedicated standardisation and certification efforts. Standardisation is indeed of paramount importance to facilitate the growth of new technologies, and the development of efficient and effective supply chains. The harmonisation of technologies, methodologies, and interfaces enables interoperable products, innovation, and competition, all leading to structuring and hence growth of markets. As quantum technologies are maturing, time has come to start thinking about further standardisation needs. This article presents insights on standardisation for quantum technologies from the perspective of the CEN-CENELEC Focus Group on Quantum Technologies (FGQT), which was established in June 2020 to coordinate and support the development of standards relevant for European industry and research. △ Less

Submitted 3 October, 2022; v1 submitted 3 March, 2022; originally announced March 2022.

Journal ref: EPJ Quantum Technol. 9 (2022) 33

Non destructive testing of actively cooled plasma facing components by means of thermal transient excitation and infrared imaging

Authors: R. Mitteau, S. Berrebi, P. Chappuis, Ph. Darses, A. Dufayet, L. Garampon, D. Guilhem, M. Lipa, Valérie Martin, H. Roche

Abstract: SATIR is a new test-bed installed at Tore Supra to perform non destructive examination of actively cooled plasma facing components. Hot and cold water flow successively in the cooling tube of the component and the surface temperature is recorded with an infrared camera. Defects are detected by a slower temperature response above unbrazed areas. The connection between temperature differences and de… ▽ More SATIR is a new test-bed installed at Tore Supra to perform non destructive examination of actively cooled plasma facing components. Hot and cold water flow successively in the cooling tube of the component and the surface temperature is recorded with an infrared camera. Defects are detected by a slower temperature response above unbrazed areas. The connection between temperature differences and defect sizes is the main difficulty. It is established by tests of standard defects and thermal transient calculations of defective geometries. SATIR has been in use for two years and has proved to be very valuable to test industrial components as well as prototypes. △ Less

Submitted 6 October, 2020; originally announced October 2020.

Journal ref: Fusion Technology 1996, Elsevier, pp.443 - 446, 1996

Satellite-based estimates of decline and rebound in China's CO$_2$ emissions during COVID-19 pandemic

Authors: Bo Zheng, Guannan Geng, Philippe Ciais, Steven J. Davis, Randall V. Martin, Jun Meng, Nana Wu, Frederic Chevallier, Gregoire Broquet, Folkert Boersma, Ronald van der A, Jintai Lin, Dabo Guan, Yu Lei, Kebin He, Qiang Zhang

Abstract: Changes in CO$_2$ emissions during the COVID-19 pandemic have been estimated from indicators on activities like transportation and electricity generation. Here, we instead use satellite observations together with bottom-up information to track the daily dynamics of CO$_2$ emissions during the pandemic. Unlike activity data, our observation-based analysis can be independently evaluated and can prov… ▽ More Changes in CO$_2$ emissions during the COVID-19 pandemic have been estimated from indicators on activities like transportation and electricity generation. Here, we instead use satellite observations together with bottom-up information to track the daily dynamics of CO$_2$ emissions during the pandemic. Unlike activity data, our observation-based analysis can be independently evaluated and can provide more detailed insights into spatially-explicit changes. Specifically, we use TROPOMI observations of NO$_2$ to deduce ten-day moving averages of NO$_x$ and CO$_2$ emissions over China, differentiating emissions by sector and province. Between January and April 2020, China's CO$_2$ emissions fell by 11.5% compared to the same period in 2019, but emissions have since rebounded to pre-pandemic levels owing to the fast economic recovery in provinces where industrial activity is concentrated. △ Less

Submitted 15 June, 2020; originally announced June 2020.

Accurate Prediction of Chemical Shifts for Aqueous Protein Structure for "Real World" Cases using Machine Learning

Authors: Jie Li, Kochise C. Bennett, Yuchen Liu, Michael V. Martin, Teresa Head-Gordon

Abstract: Accurate prediction of NMR chemical shifts can in principle help refine aqueous solution structure of proteins to the quality of X-ray structures. We report a new machine learning algorithm for protein chemical shift prediction that outperforms existing chemical shift calculators on realistic NMR solution data. Our UCBShift predictor implements two modules: a transfer prediction module that employ… ▽ More Accurate prediction of NMR chemical shifts can in principle help refine aqueous solution structure of proteins to the quality of X-ray structures. We report a new machine learning algorithm for protein chemical shift prediction that outperforms existing chemical shift calculators on realistic NMR solution data. Our UCBShift predictor implements two modules: a transfer prediction module that employs both sequence and structural alignment to select reference candidates for experimental chemical shift replication, and a redesigned machine learning module based on random forest regression which utilizes more, and more carefully curated, feature extracted data. When combined together, this new predictor achieves state of the art accuracy for predicting chemical shifts on a "real-world" dataset, with root-mean-square errors of 0.31 ppm for amide hydrogens, 0.19 ppm for Halpha, 0.87 ppm for C, 0.81 ppm for Calpha, 1.01 ppm for Cbeta, and 1.83 ppm for N, exceeding current prediction accuracy of popular chemical shift predictors such as SPARTA+ and SHIFTX2. △ Less

Submitted 5 December, 2019; originally announced December 2019.

LISA Pathfinder Performance Confirmed in an Open-Loop Configuration: Results from the Free-Fall Actuation Mode

Authors: M. Armano, H. Audley, J. Baird, P. Binetruy, M. Born, D. Bortoluzzi, E. Castelli, A. Cavalleri, A. Cesarini, A. M. Cruise, K. Danzmann, M. de Deus Silva, I. Diepholz, G. Dixon, R. Dolesi, L. Ferraioli, V. Ferroni, E. D. Fitzsimons, M. Freschi, L. Gesa, F. Gibert, D. Giardini, R. Giusteri, C. Grimani, J. Grzymisch , et al. (53 additional authors not shown)

Abstract: We report on the results of the LISA Pathfinder (LPF) free-fall mode experiment, in which the control force needed to compensate the quasistatic differential force acting on two test masses is applied intermittently as a series of "impulse" forces lasting a few seconds and separated by roughly 350 s periods of true free fall. This represents an alternative to the normal LPF mode of operation in wh… ▽ More We report on the results of the LISA Pathfinder (LPF) free-fall mode experiment, in which the control force needed to compensate the quasistatic differential force acting on two test masses is applied intermittently as a series of "impulse" forces lasting a few seconds and separated by roughly 350 s periods of true free fall. This represents an alternative to the normal LPF mode of operation in which this balancing force is applied continuously, with the advantage that the acceleration noise during free fall is measured in the absence of the actuation force, thus eliminating associated noise and force calibration errors. The differential acceleration noise measurement presented here with the free-fall mode agrees with noise measured with the continuous actuation scheme, representing an important and independent confirmation of the LPF result. An additional measurement with larger actuation forces also shows that the technique can be used to eliminate actuation noise when this is a dominant factor. △ Less

Submitted 30 August, 2019; originally announced August 2019.

Forbush decreases and $<$ 2-day GCR flux non-recurrent variations studied with LISA Pathfinder

Authors: C. Grimani, M. Armano, H. Audley, J. Baird, S. Benella, P. Binetruy, M. Born, D. Bortoluzzi, E. Castelli, A. Cavalleri, A. Cesarini, A. M. Cruise, K. Danzmann, M. de Deus Silva, I. Diepholz, G. Dixon, R. Dolesi, M. Fabi, L. Ferraioli, V. Ferroni, N. Finetti, E. D. Fitzsimons, M. Freschi, L. Gesa, F. Gibert , et al. (60 additional authors not shown)

Abstract: Non-recurrent short term variations of the galactic cosmic-ray (GCR) flux above 70 MeV n$^{-1}$ were observed between 2016 February 18 and 2017 July 3 aboard the European Space Agency LISA Pathfinder (LPF) mission orbiting around the Lagrange point L1 at 1.5$\times$10$^6$ km from Earth. The energy dependence of three Forbush decreases (FDs) is studied and reported here. A comparison of these obser… ▽ More Non-recurrent short term variations of the galactic cosmic-ray (GCR) flux above 70 MeV n$^{-1}$ were observed between 2016 February 18 and 2017 July 3 aboard the European Space Agency LISA Pathfinder (LPF) mission orbiting around the Lagrange point L1 at 1.5$\times$10$^6$ km from Earth. The energy dependence of three Forbush decreases (FDs) is studied and reported here. A comparison of these observations with others carried out in space down to the energy of a few tens of MeV n$^{-1}$ shows that the same GCR flux parameterization applies to events of different intensity during the main phase. FD observations in L1 with LPF and geomagnetic storm occurrence is also presented. Finally, the characteristics of GCR flux non-recurrent variations (peaks and depressions) of duration $<$ 2 days and their association with interplanetary structures are investigated. It is found that, most likely, plasma compression regions between subsequent corotating high-speed streams cause peaks, while heliospheric current sheet crossing cause the majority of the depressions. △ Less

Submitted 9 April, 2019; originally announced April 2019.

Journal ref: M. Armano et al 2019 ApJ 874 167

The Compact Linear Collider (CLIC) - 2018 Summary Report

Authors: The CLIC, CLICdp collaborations, :, T. K. Charles, P. J. Giansiracusa, T. G. Lucas, R. P. Rassool, M. Volpi, C. Balazs, K. Afanaciev, V. Makarenko, A. Patapenka, I. Zhuk, C. Collette, M. J. Boland, A. C. Abusleme Hoffman, M. A. Diaz, F. Garay, Y. Chi, X. He, G. Pei, S. Pei, G. Shu, X. Wang, J. Zhang , et al. (671 additional authors not shown)

Abstract: The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the… ▽ More The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years. △ Less

Submitted 6 May, 2019; v1 submitted 14 December, 2018; originally announced December 2018.

Comments: 112 pages, 59 figures; published as CERN Yellow Report Monograph Vol. 2/2018; corresponding editors: Philip N. Burrows, Nuria Catalan Lasheras, Lucie Linssen, Marko Petrič, Aidan Robson, Daniel Schulte, Eva Sicking, Steinar Stapnes

Report number: CERN-2018-005-M

Precision Charge Control for Isolated Free-Falling Test Masses: LISA Pathfinder Results

Authors: M. Armano, H. Audley, J. Baird, P. Binetruy, M. Born, D. Bortoluzzi, E. Castelli, A. Cavalleri, A. Cesarini, A. M. Cruise, K. Danzmann, M. de Deus Silva, I. Diepholz, G. Dixon, R. Dolesi, L. Ferraioli, V. Ferroni, E. D. Fitzsimons, M. Freschi, L. Gesa, D. Giardini, F. Gibert, R. Giusteri, C. Grimani, J. Grzymisch , et al. (60 additional authors not shown)

Abstract: The LISA Pathfinder charge management device was responsible for neutralising the cosmic ray induced electric charge that inevitably accumulated on the free-falling test masses at the heart of the experiment. We present measurements made on ground and in-flight that quantify the performance of this contactless discharge system which was based on photo-emission under UV illumination. In addition, a… ▽ More The LISA Pathfinder charge management device was responsible for neutralising the cosmic ray induced electric charge that inevitably accumulated on the free-falling test masses at the heart of the experiment. We present measurements made on ground and in-flight that quantify the performance of this contactless discharge system which was based on photo-emission under UV illumination. In addition, a two-part simulation is described that was developed alongside the hardware. Modelling of the absorbed UV light within the Pathfinder sensor was carried out with the GEANT4 software toolkit and a separate MATLAB charge transfer model calculated the net photocurrent between the test masses and surrounding housing in the presence of AC and DC electric fields. We confront the results of these models with observations and draw conclusions for the design of discharge systems for future experiments like LISA that will also employ free-falling test masses. △ Less

Submitted 17 September, 2018; v1 submitted 6 July, 2018; originally announced July 2018.

Journal ref: Phys. Rev. D 98, 062001 (2018)

Characteristics and energy dependence of recurrent galactic cosmic-ray flux depressions and of a Forbush decrease with LISA Pathfinder

Authors: M. Armano, H. Audley, J. Baird, M. Bassan, S. Benella, P. Binetruy, M. Born, D. Bortoluzzi, A. Cavalleri, A. Cesarini, A. M. Cruise, K. Danzmann, M. de Deus Silva, I. Diepholz, G. Dixon, R. Dolesi, M. Fabi, L. Ferraioli, V. Ferroni, N. Finetti, E. D. Fitzsimons, M. Freschi, L. Gesa, F. Gibert, D. Giardini , et al. (60 additional authors not shown)

Abstract: Galactic cosmic-ray (GCR) energy spectra observed in the inner heliosphere are modulated by the solar activity, the solar polarity and structures of solar and interplanetary origin. A high counting rate particle detector (PD) aboard LISA Pathfinder (LPF), meant for subsystems diagnostics, was devoted to the measurement of galactic cosmic-ray and solar energetic particle integral fluxes above 70 Me… ▽ More Galactic cosmic-ray (GCR) energy spectra observed in the inner heliosphere are modulated by the solar activity, the solar polarity and structures of solar and interplanetary origin. A high counting rate particle detector (PD) aboard LISA Pathfinder (LPF), meant for subsystems diagnostics, was devoted to the measurement of galactic cosmic-ray and solar energetic particle integral fluxes above 70 MeV n$^{-1}$ up to 6500 counts s$^{-1}$. PD data were gathered with a sampling time of 15 s. Characteristics and energy-dependence of GCR flux recurrent depressions and of a Forbush decrease dated August 2, 2016 are reported here. The capability of interplanetary missions, carrying PDs for instrument performance purposes, in monitoring the passage of interplanetary coronal mass ejections (ICMEs) is also discussed. △ Less

Submitted 27 April, 2018; v1 submitted 23 February, 2018; originally announced February 2018.

Journal ref: The Astrophysical Journal, 854, 2018, 113

Periodic orbits in Large Eddy Simulation of Box Turbulence

Authors: Lennaert van Veen, Alberto Vela Martin, Genta Kawahara, Tatsuya Yasuda

Abstract: We describe and compare two time-periodic flows embedded in Large Eddy Simulation (LES) of turbulence in a three-dimensional, periodic domain subject to constant external forcing. One of these flows models the regeneration of large-scale structures that was observed in this geometry by Yasuda et al. ({\sl Fluid Dyn. Res.} {\bf 46}, 061413, 2014), who used a smaller LES filter length and thus obtai… ▽ More We describe and compare two time-periodic flows embedded in Large Eddy Simulation (LES) of turbulence in a three-dimensional, periodic domain subject to constant external forcing. One of these flows models the regeneration of large-scale structures that was observed in this geometry by Yasuda et al. ({\sl Fluid Dyn. Res.} {\bf 46}, 061413, 2014), who used a smaller LES filter length and thus obtained a greater separation of scales of coherent motion. We speculate on the feasibility of modelling the regenerative dynamics with time-periodic solutions in such a flow, which may require novel techniques to deal with the extreme ill-conditioning of the associated boundary value problems. △ Less

Submitted 2 February, 2018; originally announced February 2018.

MSC Class: 76F05; 76F20

Application of Multifractal Analysis to Segmentation of Water Bodies in Optical and Synthetic Aperture Radar Satellite Images

Authors: Victor Manuel San Martin, Alejandra Figliola

Abstract: A method for segmenting water bodies in optical and synthetic aperture radar (SAR) satellite images is proposed. It makes use of the textural features of the different regions in the image for segmentation. The method consists in a multiscale analysis of the images, which allows us to study the images regularity both, locally and globally. As results of the analysis, coarse multifractal spectra of… ▽ More A method for segmenting water bodies in optical and synthetic aperture radar (SAR) satellite images is proposed. It makes use of the textural features of the different regions in the image for segmentation. The method consists in a multiscale analysis of the images, which allows us to study the images regularity both, locally and globally. As results of the analysis, coarse multifractal spectra of studied images and a group of images that associates each position (pixel) with its corresponding value of local regularity (or singularity) spectrum are obtained. Thresholds are then applied to the multifractal spectra of the images for the classification. These thresholds are selected after studying the characteristics of the spectra under the assumption that water bodies have larger local regularity than other soil types. Classifications obtained by the multifractal method are compared quantitatively with those obtained by neural networks trained to classify the pixels of the images in covered against uncovered by water. In optical images, the classifications are also compared with those derived using the so-called Normalized Differential Water Index (NDWI). △ Less

Submitted 8 April, 2016; originally announced April 2016.

Expansion-maximization-compression algorithm with spherical harmonics for single particle imaging with X-ray lasers

Authors: Julien Flamant, Nicolas Le Bihan, Andrew V. Martin, Jonathan H. Manton

Abstract: In 3D single particle imaging with X-ray free-electron lasers, particle orientation is not recorded during measurement but is instead recovered as a necessary step in the reconstruction of a 3D image from the diffraction data. Here we use harmonic analysis on the sphere to cleanly separate the angu- lar and radial degrees of freedom of this problem, providing new opportunities to efficiently use d… ▽ More In 3D single particle imaging with X-ray free-electron lasers, particle orientation is not recorded during measurement but is instead recovered as a necessary step in the reconstruction of a 3D image from the diffraction data. Here we use harmonic analysis on the sphere to cleanly separate the angu- lar and radial degrees of freedom of this problem, providing new opportunities to efficiently use data and computational resources. We develop the Expansion-Maximization-Compression algorithm into a shell-by-shell approach and implement an angular bandwidth limit that can be gradually raised during the reconstruction. We study the minimum number of patterns and minimum rotation sampling required for a desired angular and radial resolution. These extensions provide new av- enues to improve computational efficiency and speed of convergence, which are critically important considering the very large datasets expected from experiment. △ Less

Submitted 2 May, 2016; v1 submitted 3 February, 2016; originally announced February 2016.

Single molecule imaging with longer x-ray laser pulses

Authors: Andrew V. Martin, Justine K. Corso, Carl Caleman, Nicusor Timneanu, Harry M. Quiney

Abstract: During the last five years, serial femtosecond crystallography using x-ray laser pulses has developed into a powerful technique for determining the atomic structures of protein molecules from micrometer and sub-micrometer sized crystals. One of the key reasons for this success is the "self-gating" pulse effect, whereby the x-ray laser pulses do not need to outrun all radiation damage processes. In… ▽ More During the last five years, serial femtosecond crystallography using x-ray laser pulses has developed into a powerful technique for determining the atomic structures of protein molecules from micrometer and sub-micrometer sized crystals. One of the key reasons for this success is the "self-gating" pulse effect, whereby the x-ray laser pulses do not need to outrun all radiation damage processes. Instead, x-ray induced damage terminates the Bragg diffraction prior to the pulse completing its passage through the sample, as if the Bragg diffraction was generated by a shorter pulse of equal intensity. As a result, serial femtosecond crystallography does not need to be performed with pulses as short as 5--10 fs, as once thought, but can succeed for pulses 50--100 fs in duration. We show here that a similar gating effect applies to single molecule diffraction with respect to spatially uncorrelated damage processes like ionization and ion diffusion. The effect is clearly seen in calculations of the diffraction contrast, by calculating the diffraction of average structure separately to the diffraction from statistical fluctuations of the structure due to damage ("damage noise"). Our results suggest that sub-nanometer single molecule imaging with 30--50 fs pulses, like those produced at currently operating facilities, should not yet be ruled out. The theory we present opens up new experimental avenues to measure the impact of damage on single particle diffraction, which is needed to test damage models and to identify optimal imaging conditions. △ Less

Submitted 21 April, 2015; v1 submitted 2 February, 2015; originally announced February 2015.

Comments: 23 pages; 5 figures

Wind Resource Assessment in Europe Using Emergy

Authors: Subodh Paudel, Massimo Santarelli, Viktoria Martin, Bruno Lacarriere, Olivier Le Corre

Abstract: In context of increasing use of renewable sources, it is of importance to correctly evaluate the actual sustainability of their implementation. Emergy analysis is one of the possible methods useful for such an assessment. This work aims to demonstrate how the emergy approach can be used to assess the sustainability of wind energy resource in Europe. The Emergy Index of Sustainability (EIS) and the… ▽ More In context of increasing use of renewable sources, it is of importance to correctly evaluate the actual sustainability of their implementation. Emergy analysis is one of the possible methods useful for such an assessment. This work aims to demonstrate how the emergy approach can be used to assess the sustainability of wind energy resource in Europe. The Emergy Index of Sustainability (EIS) and the Emergy Yield Ratio (EYR) are used to analyze 90 stations of European regions for three types of wind turbines. To do so, the simplified Chou wind turbine model is used for different set of parameters as: nominal power and size of the wind turbines, and cut-in and cut-out wind speeds. Based on the calculation of the emergy indices, a mapping is proposed to identify the most appropriate locations for an implementation of wind turbines in European regions. The influence of the wind turbine type on the sustainability is also analyzed, in link with the local wind resource. Thus, it is concluded that the emergy sustainability indices are sensitive to the wind turbine design parameters (size, cut-in and cut-out wind speed). △ Less

Submitted 7 January, 2015; originally announced January 2015.

Towards a FPGA-controlled deep phase modulation interferometer

Authors: M. Terán, V. Martín, L. l. Gesa, I. Mateos, F. Gibert, N. Karnesis, J. Ramos-Castro, T. S. Schwarze, O. Gerberding, G. Heinzel, F. Guzmán, M. Nofrarias

Abstract: Deep phase modulation interferometry was proposed as a method to enhance homodyne interferometers to work over many fringes. In this scheme, a sinusoidal phase modulation is applied in one arm while the demodulation takes place as a post-processing step. In this contribution we report on the development to implement this scheme in a fiber coupled interferometer controlled by means of a FPGA, which… ▽ More Deep phase modulation interferometry was proposed as a method to enhance homodyne interferometers to work over many fringes. In this scheme, a sinusoidal phase modulation is applied in one arm while the demodulation takes place as a post-processing step. In this contribution we report on the development to implement this scheme in a fiber coupled interferometer controlled by means of a FPGA, which includes a LEON3 soft-core processor. The latter acts as a CPU and executes a custom made application to communicate with a host PC. In contrast to usual FPGA-based designs, this implementation allows a real-time fine tuning of the parameters involved in the setup, from the control to the post-processing parameters. △ Less

Submitted 25 November, 2014; originally announced November 2014.

Comments: Proceedings of the X LISA Symposium, Gainesville, May 18-23, 2014

Entanglement Distribution in Optical Networks

Authors: Alex Ciurana, Vicente Martin, Jesus Martinez-Mateo, Bernhard Schrenk, Momtchil Peev, Andreas Poppe

Abstract: The ability to generate entangled photon-pairs over a broad wavelength range opens the door to the simultaneous distribution of entanglement to multiple users in a network by using centralized sources and flexible wavelength-division multiplexing schemes. Here we show the design of a metropolitan optical network consisting of tree-type access networks whereby entangled photon-pairs are distributed… ▽ More The ability to generate entangled photon-pairs over a broad wavelength range opens the door to the simultaneous distribution of entanglement to multiple users in a network by using centralized sources and flexible wavelength-division multiplexing schemes. Here we show the design of a metropolitan optical network consisting of tree-type access networks whereby entangled photon-pairs are distributed to any pair of users, independent of their location. The network is constructed employing commercial off-the-shelf components and uses the existing infrastructure, which allows for moderate deployment costs. We further develop a channel plan and a network-architecture design to provide a direct optical path between any pair of users, thus allowing classical and one-way quantum communication as well as entanglement distribution. This allows the simultaneous operation of multiple quantum information technologies. Finally, we present a more flexible backbone architecture that pushes away the load limitations of the original network design by extending its reach, number of users and capabilities. △ Less

Submitted 21 September, 2014; originally announced September 2014.

Comments: 26 pages, 12 figures

Toward atomic resolution diffractive imaging of isolated molecules with x-ray free-electron lasers

Authors: Stephan Stern, Lotte Holmegaard, Frank Filsinger, Arnaud Rouzée, Artem Rudenko, Per Johnsson, Andrew V. Martin, Anton Barty, Christoph Bostedt, John D. Bozek, Ryan N. Coffee, Sascha Epp, Benjamin Erk, Lutz Foucar, Robert Hartmann, Nils Kimmel, Kai-Uwe Kühnel, Jochen Maurer, Marc Messerschmidt, Benedikt Rudek, Dmitri G. Starodub, Jan Thøgersen, Georg Weidenspointner, Thomas A. White, Henrik Stapelfeldt , et al. (3 additional authors not shown)

Abstract: We give a detailed account of the theoretical analysis and the experimental results of an x-ray-diffraction experiment on quantum-state selected and strongly laser-aligned gas-phase ensembles of the prototypical large asymmetric rotor molecule 2,5-diiodobenzonitrile, performed at the Linac Coherent Light Source [Phys. Rev. Lett. 112, 083002 (2014)]. This experiment is the first step toward coheren… ▽ More We give a detailed account of the theoretical analysis and the experimental results of an x-ray-diffraction experiment on quantum-state selected and strongly laser-aligned gas-phase ensembles of the prototypical large asymmetric rotor molecule 2,5-diiodobenzonitrile, performed at the Linac Coherent Light Source [Phys. Rev. Lett. 112, 083002 (2014)]. This experiment is the first step toward coherent diffractive imaging of structures and structural dynamics of isolated molecules at atomic resolution, i. e., picometers and femtoseconds, using x-ray free-electron lasers. △ Less

Submitted 11 March, 2014; originally announced March 2014.

Comments: submitted to Faraday Discussions 171 "Emerging Photon Technologies for Chemical Dynamics"

Journal ref: Faraday Discuss., 2014,171, 393-418

Physics at the CLIC e+e- Linear Collider -- Input to the Snowmass process 2013

Authors: Halina Abramowicz, Angel Abusleme, Konstatin Afanaciev, Gideon Alexander, Niloufar Alipour Tehrani, Oscar Alonso, Kristoffer K. Andersen, Samir Arfaoui, Csaba Balazs, Tim Barklow, Marco Battaglia, Mathieu Benoit, Burak Bilki, Jean-Jacques Blaising, Mark Boland, Marça Boronat, Ivanka Božović Jelisavčić, Philip Burrows, Maximilien Chefdeville, Roberto Contino, Dominik Dannheim, Marcel Demarteau, Marco Aurelio Diaz Gutierrez, Angel Diéguez, Jorge Duarte Campderros , et al. (98 additional authors not shown)

Abstract: This paper summarizes the physics potential of the CLIC high-energy e+e- linear collider. It provides input to the Snowmass 2013 process for the energy-frontier working groups on The Higgs Boson (HE1), Precision Study of Electroweak Interactions (HE2), Fully Understanding the Top Quark (HE3), as well as The Path Beyond the Standard Model -- New Particles, Forces, and Dimensions (HE4). It is accomp… ▽ More This paper summarizes the physics potential of the CLIC high-energy e+e- linear collider. It provides input to the Snowmass 2013 process for the energy-frontier working groups on The Higgs Boson (HE1), Precision Study of Electroweak Interactions (HE2), Fully Understanding the Top Quark (HE3), as well as The Path Beyond the Standard Model -- New Particles, Forces, and Dimensions (HE4). It is accompanied by a paper describing the CLIC accelerator study, submitted to the Frontier Capabilities group of the Snowmass process. △ Less

Submitted 30 September, 2013; v1 submitted 19 July, 2013; originally announced July 2013.

Comments: Updated the author list, updated Higgs results and small changes in the text of the Higgs section, updated results on composite Higgs bosons, added and updated references. Final submission for the Snowmass proceedings

X-ray diffraction from isolated and strongly aligned gas-phase molecules with a free-electron laser

Authors: Jochen Küpper, Stephan Stern, Lotte Holmegaard, Frank Filsinger, Arnaud Rouzée, Artem Rudenko, Per Johnsson, Andrew V. Martin, Marcus Adolph, Andrew Aquila, Saša Bajt, Anton Barty, Christoph Bostedt, John Bozek, Carl Caleman, Ryan Coffee, Nicola Coppola, Tjark Delmas, Sascha Epp, Benjamin Erk, Lutz Foucar, Tais Gorkhover, Lars Gumprecht, Andreas Hartmann, Robert Hartmann , et al. (30 additional authors not shown)

Abstract: We report experimental results on x-ray diffraction of quantum-state-selected and strongly aligned ensembles of the prototypical asymmetric rotor molecule 2,5-diiodobenzonitrile using the Linac Coherent Light Source. The experiments demonstrate first steps toward a new approach to diffractive imaging of distinct structures of individual, isolated gas-phase molecules. We confirm several key ingredi… ▽ More We report experimental results on x-ray diffraction of quantum-state-selected and strongly aligned ensembles of the prototypical asymmetric rotor molecule 2,5-diiodobenzonitrile using the Linac Coherent Light Source. The experiments demonstrate first steps toward a new approach to diffractive imaging of distinct structures of individual, isolated gas-phase molecules. We confirm several key ingredients of single molecule diffraction experiments: the abilities to detect and count individual scattered x-ray photons in single shot diffraction data, to deliver state-selected, e. g., structural-isomer-selected, ensembles of molecules to the x-ray interaction volume, and to strongly align the scattering molecules. Our approach, using ultrashort x-ray pulses, is suitable to study ultrafast dynamics of isolated molecules. △ Less

Submitted 28 January, 2014; v1 submitted 17 July, 2013; originally announced July 2013.

Comments: submitted to PRL

Journal ref: Phys. Rev. Lett. 112, 083002 (2014)

Femtosecond X-ray Laser induced transient electronic phase change observed in fullerene C60

Authors: Brian Abbey, Ruben A. Dilanian, Connie Darmanin, Rebecca A. Ryan, Corey T. Putkunz, Andrew V. Martin, Victor Streltsov, Michael W. M. Jones, Naylyn Gaffney, Felix Hofmann, Garth J. Williams, Sebastian Boutet, Marc Messerschmidt, M. Marvin Siebert, Sophie Williams, Evan Curwood, Eugeniu Balaur, Andrew G. Peele, Keith A. Nugent, Harry M. Quiney

Abstract: X-ray Free-Electron Lasers (XFELs) deliver X-ray pulses with a coherent flux that is approximately eight orders of magnitude greater than that available from a modern third generation synchrotron source. The power density in an XFEL pulse may be so high that it can modify the electronic properties of a sample on a femtosecond timescale. Exploration of the interaction of intense coherent X-ray puls… ▽ More X-ray Free-Electron Lasers (XFELs) deliver X-ray pulses with a coherent flux that is approximately eight orders of magnitude greater than that available from a modern third generation synchrotron source. The power density in an XFEL pulse may be so high that it can modify the electronic properties of a sample on a femtosecond timescale. Exploration of the interaction of intense coherent X-ray pulses and matter is of both intrinsic scientific interest, and of critical importance to the interpretation of experiments that probe the structures of materials using high-brightness femtosecond XFEL pulses. In this letter, we report observations of the diffraction of an extremely intense 32 fs nanofocused X-ray pulses by a powder sample of crystalline C60. We find that the diffraction pattern at the highest available incident power exhibits significant structural signatures that are absent in data obtained at both third-generation synchrotron sources or from XFEL sources operating at low output power. These signatures are consistent with a highly ordered structure that does not correspond with any previously known phase of crystalline C60. We argue that these data indicate the formation of a transient phase that is formed by a dynamic electronic distortion induced by inner-shell ionisation of at least one carbon atom in each C60 molecule. △ Less

Submitted 24 September, 2012; originally announced September 2012.

Comments: 9 pages, 3 figures

Investigating transport of dust particles in plasmas

Authors: S. Bardin, J-L. Briançon, F. Brochard, V. Martin, Y. Zayachuk, R. Hugon, J. Bougdira

Abstract: An algorithm has been developped, which makes it possible to automatically extract trajectories of a large number of particles from fast imaging data, allowing a statistical analysis of particles trajectories under various plasma conditions, a better understanding of their influence on plasma properties, and a better characterization of the plasma itself. In this contribution, we focus on results… ▽ More An algorithm has been developped, which makes it possible to automatically extract trajectories of a large number of particles from fast imaging data, allowing a statistical analysis of particles trajectories under various plasma conditions, a better understanding of their influence on plasma properties, and a better characterization of the plasma itself. In this contribution, we focus on results obtained in a radiofrequency parallel plate reactor, where a large amount of micron-sized carbon dust is produced in situ. The use of the rescaled range analysis (R/S analysis) applied to dust particles displacements allows decomposing dust dynamic on different time scales. It is shown that dust displacement is dominated by collisions on short time scales whereas long term behaviour is strongly influenced by large scale plasma fluctuations. △ Less

Submitted 24 August, 2010; originally announced August 2010.

Comments: This version contains 8 pages and 5 figures. This work has been presented in the 1st Int. Conf. on Plasma Diagnostics, O8, April 12-16 2010, Pont-à-Mousson, France (2010). It has been submitted to Contribution to Plasma Physics

The LCFIVertex package: vertexing, flavour tagging and vertex charge reconstruction with an ILC vertex detector

Authors: LCFI Collaboration, David Bailey, Erik Devetak, Mark Grimes, Kristian Harder, Sonja Hillert, David Jackson, Talini Pinto Jayawardena, Ben Jeffery, Tomas Lastovicka, Clare Lynch, Victoria Martin, Roberval Walsh, Phil Allport, Yambazi Banda, Craig Buttar, Alexandre Cheplakov, David Cussans, Chris Damerell, Nicolo de Groot, Johan Fopma, Brian Foster, Senerath Galagedera, Rui Gao, Anthony Gillman , et al. (36 additional authors not shown)

Abstract: The precision measurements envisaged at the International Linear Collider (ILC) depend on excellent instrumentation and reconstruction software. The correct identification of heavy flavour jets, placing unprecedented requirements on the quality of the vertex detector, will be central for the ILC programme. This paper describes the LCFIVertex software, which provides tools for vertex finding and… ▽ More The precision measurements envisaged at the International Linear Collider (ILC) depend on excellent instrumentation and reconstruction software. The correct identification of heavy flavour jets, placing unprecedented requirements on the quality of the vertex detector, will be central for the ILC programme. This paper describes the LCFIVertex software, which provides tools for vertex finding and for identification of the flavour and charge of the leading hadron in heavy flavour jets. These tools are essential for the ongoing optimisation of the vertex detector design for linear colliders such as the ILC. The paper describes the algorithms implemented in the LCFIVertex package, as well as the scope of the code and its performance for a typical vertex detector design. △ Less

Submitted 20 August, 2009; originally announced August 2009.

Comments: 40 pages, accepted by NIM A

Journal ref: Nucl.Instrum.Meth.A610:573-589,2009

Phase boundary detection for dilution refrigerators

Authors: E. ter Haar, R. V. Martin

Abstract: We describe a device to conveniently measure the positions of the phase boundaries in a dilution refrigerator. We show how a simple modification of a standard capacitive level gauge (segmentation of one of the electrodes) permits a direct calibration of the capacitance versus phase boundary position. We compare this direct calibration with the indirect procedure that must be adopted for a conven… ▽ More We describe a device to conveniently measure the positions of the phase boundaries in a dilution refrigerator. We show how a simple modification of a standard capacitive level gauge (segmentation of one of the electrodes) permits a direct calibration of the capacitance versus phase boundary position. We compare this direct calibration with the indirect procedure that must be adopted for a conventional capacitive level gauge. The device facilitates the correct adjustment of the 3He/4He fraction in the dilution refrigerator. △ Less

Submitted 27 September, 2004; originally announced September 2004.

Comments: 3 pages

Journal ref: Review of Scientific Instruments -- September 2004 -- Volume 75, Issue 9, pp. 3071-3073