Showing 1–50 of 108 results for author: Martín, C

AC-LGADs Fermilab Front-End Electronics Characterization

Authors: René Ríos, Esteban Felipe Molina Cardenas, Cristian Peña, Orlando Soto, William Brooks, Artur Apresyan, Sergey Los, Claudio San Martín

Abstract: We characterized the front-end electronics used to process high-frequency signals from low-gain avalanche diodes (LGADs) at the Fermilab Test Beam Facility. LGADs are silicon detectors employed for charged particle tracking, offering exceptional spatial and temporal resolution. The purpose of this characterization was to understand how the signal resolution is influenced by the front-end electroni… ▽ More We characterized the front-end electronics used to process high-frequency signals from low-gain avalanche diodes (LGADs) at the Fermilab Test Beam Facility. LGADs are silicon detectors employed for charged particle tracking, offering exceptional spatial and temporal resolution. The purpose of this characterization was to understand how the signal resolution is influenced by the front-end electronics. To achieve this, we developed a setup capable of generating input signals with varying amplitudes. The output results demonstrated that signal processing by the front-end electronics plays a crucial role in enhancing time resolution. We showed that the time resolution achieved by the FEE board is better than $2\: ps$. △ Less

Submitted 15 April, 2025; v1 submitted 11 April, 2025; originally announced April 2025.

Technical description and performance of the phase II version of the Keck Planet Imager and Characterizer

Authors: Nemanja Jovanovic, Daniel Echeverri, Jacques-Robert Delorme, Luke Finnerty, Tobias Schofield, Jason J. Wang, Yinzi Xin, Jerry Xuan, J. Kent Wallacee, Dimitri Mawet, Aniket Sanghi, Ashley Baker, Randall Bartos, Charlotte Z. Bond, Benjamin Calvin, Sylvain Cetre, Greg Doppmann, Michael P. Fitzgerald, Jason Fucik, Maodong Gao, Jinhao Ge, Charlotte Guthery, Katelyn Horstman, Chih-Chun Hsud, Joshua Liberman , et al. (24 additional authors not shown)

Abstract: The Keck Planet Imager and Characterizer (KPIC) is a series of upgrades for the Keck II Adaptive Optics (AO) system and the NIRSPEC spectrograph to enable diffraction limited, high resolution (R>30000) spectroscopy of exoplanets and low mass companions in the K and L bands. Phase I consisted of single mode fiber injection/extraction units (FIU/FEU) used in conjunction with a H band pyramid wavefro… ▽ More The Keck Planet Imager and Characterizer (KPIC) is a series of upgrades for the Keck II Adaptive Optics (AO) system and the NIRSPEC spectrograph to enable diffraction limited, high resolution (R>30000) spectroscopy of exoplanets and low mass companions in the K and L bands. Phase I consisted of single mode fiber injection/extraction units (FIU/FEU) used in conjunction with a H band pyramid wavefront sensor. The use of single mode fibers provides a gain in stellar rejection, a substantial reduction in sky background, and an extremely stable line spread function in the spectrograph. Phase II, deployed and commissioned in 2022, brought a 1000 actuator deformable mirror, beam shaping optics, a vortex mask, and other upgrades to the FIU/FEU. An additional service mission in 2024 extended operations down to y band, delivered an atmospheric dispersion corrector, and provided access to two laser frequency combs. KPIC phase II brings higher planet throughput, lower stellar leakage and many new observing modes which extend its ability to characterize exoplanets at high spectral resolution, building on the success of phase I. In this paper we present a description of the final phase II version of KPIC, along with results of system level laboratory testing and characterization showing the instrument's phase II throughput, stability, repeatability, and other key performance metrics prior to delivery and during installation at Keck. We outlined the capabilities of the various observing modes enabled by the new modules as well as efforts to compensate for static aberrations and non common path errors at Keck, which were issues that plagued phase I. Finally, we show results from commissioning. △ Less

Submitted 3 February, 2025; originally announced February 2025.

Comments: 36 pages, 16 figures

Report number: 015005

Journal ref: Journal of Astronomical Telescopes, Instruments, and Systems, Vol. 11, Issue 1, 015005 (February 2025)

Singlet fission contributes to solar energy harvesting in photosynthesis

Authors: Shuangqing Wang, George A. Sutherland, James P. Pidgeon, David J. K. Swainsbury, Elizabeth C. Martin, Cvetelin Vasilev, Andrew Hitchcock, Daniel J. Gillard, Ravi Kumar Venkatraman, Dimitri Chekulaev, Alexander I. Tartakovskii, C. Neil Hunter, Jenny Clark

Abstract: Singlet fission (SF), the spin-allowed conversion of one singlet exciton into two triplet excitons, offers a promising strategy for enhancing the efficiency of photovoltaic devices. However, realising this potential necessitates materials capable of ultrafast (sub-picosecond) SF and the generation of long-lived (> microsecond) triplet excitons, a synthetic challenge. Some photosynthetic organisms… ▽ More Singlet fission (SF), the spin-allowed conversion of one singlet exciton into two triplet excitons, offers a promising strategy for enhancing the efficiency of photovoltaic devices. However, realising this potential necessitates materials capable of ultrafast (sub-picosecond) SF and the generation of long-lived (> microsecond) triplet excitons, a synthetic challenge. Some photosynthetic organisms have evolved sophisticated molecular architectures that demonstrate these criteria, but despite 40 years of study, the underlying SF mechanisms and its functional significance in these organisms remain unclear. Here, we use a suite of ultrafast and magneto-optical spectroscopic techniques to understand the mechanism of SF within light-harvesting 1 (LH1) complexes from wild-type and genetically modified photosynthetic bacteria. Our findings reveal a SF process, termed "heterofission", wherein singlet excitons are transformed into triplet excitons localised on adjacent carotenoid (Crt) and bacteriochlorophyll (BChl) molecules. We also uncover an unexpected functional role for SF in augmenting Crt-to-BChl photosynthetic energy transfer efficiency. By transiently storing electronic excitation within the SF-generated triplet pair, the system circumvents rapid thermalisation of Crt excitations, thereby enhancing energy transfer efficiency to the BChl Qy state, and enabling the organism to usefully harvest more sunlight. △ Less

Submitted 27 November, 2024; originally announced November 2024.

Comments: Main Text: 33 pages and 5 figures; Supplementary Information: 31 pages and 18 figures

An exploration of temporal coherence of light through holography

Authors: Alexandre Escarguel, Céline Martin

Abstract: Abstract The coherence time $τ$ c of light is an important physical parameter in fundamental and applied optics and therefore, it is crucial that students understand its meaning. In this work, this notion is addressed through holography by simple experiments for bachelor and master students at Aix-Marseilles University. The coherence time of light sources used to make holograms is one of the key p… ▽ More Abstract The coherence time $τ$ c of light is an important physical parameter in fundamental and applied optics and therefore, it is crucial that students understand its meaning. In this work, this notion is addressed through holography by simple experiments for bachelor and master students at Aix-Marseilles University. The coherence time of light sources used to make holograms is one of the key parameters for the success of such experiments; it must be large enough so that an optical wave train divided in two parts (reference/objects beams) interferes with itself to record the 3D shape of the object on the photosensitive medium. That is why laser sources, with much longer $τ$ c than other light sources, are commonly used to make holograms. We have recently worked with students on this problem; is it possible not to use a laser to make holograms? Which coherence time do we need for which hologram? After a study of the coherence time of different light sources (HeNe laser, red Light-Emitting Diode (LED) with and without 1 nm wide interference filter and high pressure mercury lamp with green filter) by emission spectroscopy and by interferometry, an extremely simple experimental setup is used to realize holograms of a coin with them. The observation of these holograms, coupled to a scan of the coin shape with an optical microscope, enables the deduction of information on the coherence length of these light sources. △ Less

Submitted 15 October, 2024; originally announced October 2024.

Journal ref: European Journal of Physics, 2024, 45 (6), pp.065303

High Energy Particle Detection with Large Area Superconducting Microwire Array

Authors: Cristián Peña, Christina Wang, Si Xie, Adolf Bornheim, Matías Barría, Claudio San Martín, Valentina Vega, Artur Apresyan, Emanuel Knehr, Boris Korzh, Jamie Luskin, Lautaro Narváez, Sahil Patel, Matthew Shaw, Maria Spiropulu

Abstract: We present the first detailed study of an 8-channel $2\times2$ mm$^{2}$ WSi superconducting microwire single photon detector (SMSPD) array exposed to 120 GeV proton beam and 8 GeV electron and pion beam at the Fermilab Test Beam Facility. The SMSPD detection efficiency was measured for the first time for protons, electrons, and pions, enabled by the use of a silicon tracking telescope that provide… ▽ More We present the first detailed study of an 8-channel $2\times2$ mm$^{2}$ WSi superconducting microwire single photon detector (SMSPD) array exposed to 120 GeV proton beam and 8 GeV electron and pion beam at the Fermilab Test Beam Facility. The SMSPD detection efficiency was measured for the first time for protons, electrons, and pions, enabled by the use of a silicon tracking telescope that provided precise spatial resolution of 30 $μ$m for 120 GeV protons and 130 $μ$m for 8 GeV electrons and pions. The result demonstrated consistent detection efficiency across pixels and at different bias currents. Time resolution of 1.15 ns was measured for the first time for SMSPD with proton, electron, and pions, enabled by the use of an MCP-PMT which provided a ps-level reference time stamp. The results presented is the first step towards developing SMSPD array systems optimized for high energy particle detection and identification for future accelerator-based experiments. △ Less

Submitted 6 March, 2025; v1 submitted 30 September, 2024; originally announced October 2024.

Report number: JINST 20 P03001

Journal ref: Journal of Instrumentation, Volume 20, March 2025

Volumetric behaviour of (carbon dioxide + hydrocarbon) mixtures at high pressures

Authors: Johnny Zambrano, Franklin V. Gómez-Soto, Daniel Lozano-Martín, M. Carmen Martín, José J. Segovia

Abstract: The interest of oil industry in increasing heavy oil production has promoted the use of enhanced oil recovery techniques such as $CO_{2}$ injection, which produce a decrease of oil viscosity and displacement of heavy oil from reservoir to surface. The design of these processes requires accurate data of densities, viscosities or surface tensions of ($CO_{2}$ + hydrocarbon) mixtures in order to simu… ▽ More The interest of oil industry in increasing heavy oil production has promoted the use of enhanced oil recovery techniques such as $CO_{2}$ injection, which produce a decrease of oil viscosity and displacement of heavy oil from reservoir to surface. The design of these processes requires accurate data of densities, viscosities or surface tensions of ($CO_{2}$ + hydrocarbon) mixtures in order to simulate the behaviour of these mixtures in the reservoir. An automated Anton Paar DMA HPM vibrating-tube densimeter was used to measure densities of this kind of mixtures, and a new mixture injection system, by means of two syringe pumps, was developed for the densimeter. The equipment operates at high pressure, which is controlled through a back pressure valve and a variable volume cylinder with a stepper motor. The estimated standard uncertainty of the density is $\mathrm{\pm0.9 \ kg \cdot m^{-3}}$ at temperatures below 373.15 K and pressure range (0.1-140) MPa.In this paper, the densities of the mixtures ($CO_{2}$ + $n$-decane), ($CO_{2}$ + $n$-dodecane) and ($CO_{2}$ + squalane) are reported at $T$ = (283.15-393.15) K and $p$ = (10-100) MPa. △ Less

Submitted 17 September, 2024; originally announced September 2024.

Journal ref: The Journal of Supercritical Fluids Volume 110, 2016, Pages 103-109

Speeds of sound for a biogas mixture $CH_{4}$ + $N_{2}$ + $CO_{2}$ + $CO$ from $p$ = (1-12) MPa at $T$ = (273, 300 and 325) K measured with a spherical resonator

Authors: Daniel Lozano-Martín, José J. Segovia, M. Carmen Martín, Teresa Fernández-Vicente, D. del Campo

Abstract: The present work aims to measure speeds of sound $c$ in a biogas mixture of $CH_{4}$ + $N_{2}$ + $CO_{2}$ + $CO$, at $p$ = (1-12) MPa and $T$ = (273, 300 and 325) K, using a spherical acoustical resonator. The results are fitted to the virial acoustic equation of state, and the virial acoustic coefficients are obtained, $β_{a}$ and $γ_{a}$ and extrapolated to zero pressure, determining the adiabat… ▽ More The present work aims to measure speeds of sound $c$ in a biogas mixture of $CH_{4}$ + $N_{2}$ + $CO_{2}$ + $CO$, at $p$ = (1-12) MPa and $T$ = (273, 300 and 325) K, using a spherical acoustical resonator. The results are fitted to the virial acoustic equation of state, and the virial acoustic coefficients are obtained, $β_{a}$ and $γ_{a}$ and extrapolated to zero pressure, determining the adiabatic coefficient as perfect gas, $γ^{pg}$, and the isobaric and isochoric heat capacities as perfect gas, $C_{p}^{pg}$ and $C_{V}^{pg}$, respectively. The speeds of sound are acquired with a mean expanded relative uncertainty of 165 parts in $10^{6}$ ($k$ = 2) and are compared with the results predicted by the reference equation of state for this kind of mixture (natural gas-like mixtures), EoS GERG-2008. Relative deviations between experimental data and values estimated by this model were less than 700 parts in $10^{6}$ at $T$ = 325 K, and below 400 parts in $10^{6}$, and within measurement uncertainty of at $T$ = 300 K, although appreciably higher at isotherm $T$ = 273 K at the highest pressure data for this work, and even reaching values above 3 400 parts in $10^{6}$. △ Less

Submitted 17 September, 2024; originally announced September 2024.

Journal ref: The Journal of Chemical Thermodynamics Volume 102, 2016, Pages 348-356

Updated determination of the molar gas constant $R$ by acoustic measurements in argon at UVa-CEM

Authors: J J Segovia, D Lozano-Martín, M C Martín, C R Chamorro, M A Villamañán, E Pérez, C García Izquierdo, D del Campo

Abstract: A new determination of the molar gas constant was performed from measurements of the speed of sound in argon at the triple point of water and extrapolation to zero pressure. A new resonant cavity was used. This is a triaxial ellipsoid whose walls are gold-coated steel and which is divided into two identical halves that are bolted and sealed with an O-ring. Microwave and electroacoustic traducers a… ▽ More A new determination of the molar gas constant was performed from measurements of the speed of sound in argon at the triple point of water and extrapolation to zero pressure. A new resonant cavity was used. This is a triaxial ellipsoid whose walls are gold-coated steel and which is divided into two identical halves that are bolted and sealed with an O-ring. Microwave and electroacoustic traducers are located in the northern and southern parts of the cavity, respectively, so that measurements of microwave and acoustic frequencies are carried out in the same experiment. Measurements were taken at pressures from 600 kPa to 60 kPa and at 273.16 K. The internal equivalent radius of the cavity was accurately determined by microwave measurements and the first four radial symmetric acoustic modes were simultaneously measured and used to calculate the speed of sound. The improvements made using the new cavity have reduced by half the main contributions to the uncertainty due to the radius determination using microwave measurements which amounts to 4.7 parts in $10^{6}$ and the acoustic measurements, 4.4 parts in $10^{6}$, where the main contribution (3.7 parts in $10^{6}$) is the relative excess half-widths associated with the limit of our acoustic model, compared with our previous measurements. As a result of all the improvements with the new cavity and the measurements performed, we determined the molar gas constant $R$ = (8.314 449 $\pm$ 0.000 056) J/(K mol) which corresponds to a relative standard uncertainty of 6.7 parts in $10^{6}$. The value reported in this paper lies -1.3 parts in $10^{6}$ below the recommended value of CODATA 2014, although still within the range consistent with it. △ Less

Submitted 16 September, 2024; originally announced September 2024.

Journal ref: Metrologia 54, 2017, 663-673

A novel technique based on a cylindrical microwave resonator for high pressure phase equilibrium determination

Authors: Rodrigo Susial, Ángel Gómez-Hernández, Daniel Lozano-Martín, Dolores del Campo, M. Carmen Martín, José J. Segovia

Abstract: The development of a novel technique based on a cylindrical microwave resonator for high pressure phase equilibrium determination is described. Electric permittivity or dielectric constant is a physical property that depends on temperature and pressure $ε$($p$,$T$). Based on this property, a measuring technique consisting of a cylindrical resonant cavity that works in the microwave spectrum has be… ▽ More The development of a novel technique based on a cylindrical microwave resonator for high pressure phase equilibrium determination is described. Electric permittivity or dielectric constant is a physical property that depends on temperature and pressure $ε$($p$,$T$). Based on this property, a measuring technique consisting of a cylindrical resonant cavity that works in the microwave spectrum has been developed. Equilibrium data of fluid mixtures are measured at high pressure using a synthetic method, where phase transition is determined under isothermal conditions due to the change of the dielectric constant. This technique may be a more accurate alternative to conventional visual synthetic methods. The technique was validated measuring pure $CO_{2}$, and phase behaviour was then determined for two binary mixtures [$CO_{2}$ (0.6) + $CH_{4}$ (0.4)] and [$CO_{2}$ (0.4) + $CH_{4}$ (0.6)], results for which are presented. These systems are interesting for the study of biogas-like mixtures. In addition, data were compared with the equation of state used for natural gas GERG-2008, and also, they were modelled using Peng-Robinson equation of state and Wong-Sandler mixing rules, which are widely employed in chemical industries and which give good results. △ Less

Submitted 12 September, 2024; originally announced September 2024.

Journal ref: The Journal of Chemical Thermodynamics Volume 135, 2019, Pages 124-132

Speeds of sound for ($CH_{4}$ + $He$) mixtures from $p$ = (0.5 to 20) MPa at $T$ = (273.16 to 375) K

Authors: Daniel Lozano-Martín, Andres Rojo, M. Carmen Martín, David Vega-Maza, José Juan Segovia

Abstract: This work aims to provide accurate and wide-ranging experimental new speed of sound data $w$($p$,$T$) of two binary ($CH_{4}$ + $He$) mixtures at a nominal helium content of 5% and 10% at pressures $p$ = (0.5 up to 20) MPa and temperatures $T$ = (273.16, 300, 325, 350 and 375) K. For this purpose, the most accurate technique for determining speed of sound in gas phase has been used: the spherical… ▽ More This work aims to provide accurate and wide-ranging experimental new speed of sound data $w$($p$,$T$) of two binary ($CH_{4}$ + $He$) mixtures at a nominal helium content of 5% and 10% at pressures $p$ = (0.5 up to 20) MPa and temperatures $T$ = (273.16, 300, 325, 350 and 375) K. For this purpose, the most accurate technique for determining speed of sound in gas phase has been used: the spherical acoustic resonator. Speed of sound is determined with an overall relative expanded ($k$ = 2) uncertainty of 230 parts in $10^{6}$ and compared to reference models for multicomponent natural gas-like mixtures: AGA8-DC92 and GERG-2008 equations of state. Relative deviations of experimental data from model estimations are outside the experimental uncertainty limit, although all points are mostly within the AGA uncertainty of 0.2% and GERG uncertainty of 0.5% and worsen as the helium content increases. Absolute average deviations are better than 0.45% for GERG and below 0.14% for AGA models in (0.95 $CH_{4}$ + 0.05 $He$) mixture and below 0.83% for GERG and within 0.22% for AGA equations in (0.90 $CH_{4}$ + 0.10 $He$) mixture. △ Less

Submitted 12 September, 2024; originally announced September 2024.

Journal ref: The Journal of Chemical Thermodynamics Volume 139, 2019, 105869

Speed of sound for three binary ($CH_{4}$ + $H_{2}$) mixtures from $p$ = (0.5 up to 20) MPa at $T$ = (273.16 to 375) K

Authors: Daniel Lozano-Martín, M. Carmen Martín, César R. Chamorro, Dirk Tuma, José Juan Segovia

Abstract: Speed of sound is one of the thermodynamic properties that can be measured with least uncertainty and is of great interest in developing equations of state. Moreover, accurate models are needed by the H2 industry to design the transport and storage stages of hydrogen blends in the natural gas network. This research aims to provide accurate data for ($CH_{4}$ + $H_{2}$) mixtures of nominal (5, 10,… ▽ More Speed of sound is one of the thermodynamic properties that can be measured with least uncertainty and is of great interest in developing equations of state. Moreover, accurate models are needed by the H2 industry to design the transport and storage stages of hydrogen blends in the natural gas network. This research aims to provide accurate data for ($CH_{4}$ + $H_{2}$) mixtures of nominal (5, 10, and 50) mol-% of hydrogen, in the $p$ = (0.5 up to 20) MPa pressure range and with temperatures $T$ = (273.16, 300, 325, 350, and 375) K. Using an acoustic spherical resonator, speed of sound was determined with an overall relative expanded ($k$ = 2) uncertainty of 220 parts in $10^{6}$ (0.022%). Data were compared to reference equations of state for natural gas-like mixtures, such as AGA8-DC92 and GERG-2008. Average absolute deviations below 0.095% and percentage deviations between 0.029% and up to 0.30%, respectively, were obtained. Additionally, results were fitted to the acoustic virial equation of state and adiabatic coefficients, molar isochoric heat capacities and molar isobaric heat capacities as perfect-gas, together with second and third acoustic virial coefficients were estimated. Density second virial coefficients were also obtained. △ Less

Submitted 11 September, 2024; originally announced September 2024.

Journal ref: International Journal of Hydrogen Energy Volume 45, Issue 7, 2020, Pages 4765-4783

Thermodynamic characterization of the ($CO_{2}$ + $O_{2}$) binary system for the development of models for CCS processes: Accurate experimental ($p$, $ρ$, $T$) data and virial coefficients

Authors: Daniel Lozano-Martín, David Vega-Maza, M. Carmen Martín, Dirk Tuma, César R. Chamorro

Abstract: Continuing our study on ($CO_{2}$ + $O_{2}$) mixtures, this work reports new experimental($p$, $ρ$, $T$) data for two oxygen-rich mixtures with mole fractions $x$($O_{2}$) = (0.50 and 0.75) mol/mol, in the temperature range $T$ = (250-375) K and pressure range $p$ = (0.5-20) MPa, using a single-sinker densimeter. Experimental density data were compared to two well-established equation-of-state mod… ▽ More Continuing our study on ($CO_{2}$ + $O_{2}$) mixtures, this work reports new experimental($p$, $ρ$, $T$) data for two oxygen-rich mixtures with mole fractions $x$($O_{2}$) = (0.50 and 0.75) mol/mol, in the temperature range $T$ = (250-375) K and pressure range $p$ = (0.5-20) MPa, using a single-sinker densimeter. Experimental density data were compared to two well-established equation-of-state models: EOS-CG and GERG-2008. In the $p$, $T$-range investigated, the EOS-CG gave a better reproduction for the equimolar mixture $x$($O_{2}$) = 0.5, whereas the GERG-2008 performed significantly better for the oxygen-rich mixture $x$($O_{2}$) = 0.75. The EOS-CG generally overestimates the density, while the GERG-2008 underestimates it. This complete set of new experimental data, together with previous measurements, is used to calculate the virial coefficients $B$($T$, $x$) and $C$($T$, $x$), as well as the second interaction virial coefficient $B_{12}$($T$) for the ($CO_{2}$ + $O_{2}$) system. △ Less

Submitted 10 September, 2024; originally announced September 2024.

Journal ref: The Journal of Supercritical Fluids Volume 169, 2021, 105074

Speed of sound data, derived perfect-gas heat capacities, and acoustic virial coefficients of a calibration standard natural gas mixture and a low-calorific $H_{2}$-enriched mixture

Authors: Daniel Lozano-Martín, David Vega-Maza, Alejandro Moreau, M. Carmen Martín, Dirk Tuma, José J. Segovia

Abstract: This work aims to address the technical aspects related to the thermodynamic characterization of natural gas mixtures blended with hydrogen for the introduction of alternative energy sources within the Power-to-Gas framework. For that purpose, new experimental speed of sound data are presented in the pressure range between (0.1 up to 13) MPa and at temperatures of (260, 273.16, 300, 325, and 350)… ▽ More This work aims to address the technical aspects related to the thermodynamic characterization of natural gas mixtures blended with hydrogen for the introduction of alternative energy sources within the Power-to-Gas framework. For that purpose, new experimental speed of sound data are presented in the pressure range between (0.1 up to 13) MPa and at temperatures of (260, 273.16, 300, 325, and 350) K for two mixtures qualified as primary calibration standards: a 11 component synthetic natural gas mixture (11 M), and another low-calorific $H_{2}$-enriched natural gas mixture with a nominal molar percentage $x_{H_{2}}$ = 3%. Measurements have been gathered using a spherical acoustic resonator with an experimental expanded ($k$ = 2) uncertainty better than 200 parts in $10^{6}$ (0.02%) in the speed of sound. The heat capacity ratio as perfect-gas $γ_{pg}$, the molar heat capacity as perfect-gas $C_{p,m}^{pg}$, and the second $β_{a}$ and third $γ_{a}$ acoustic virial coefficients are derived from the speed of sound values. All the results are compared with the reference mixture models for natural gas-like mixtures, the AGA8-DC92 EoS and the GERG-2008 EoS, with special attention to the impact of hydrogen on those properties. Data are found to be mostly consistent within the model uncertainty in the 11 M synthetic mixture as expected, but for the hydrogen-enriched mixture in the limit of the model uncertainty at the highest measuring pressures. △ Less

Submitted 6 September, 2024; originally announced September 2024.

Journal ref: The Journal of Chemical Thermodynamics Volume 158, 2021, 106434

Speed of sound and phase equilibria for ($CO_{2}$ + $C_{3}H_{8}$) mixtures

Authors: Daniel Lozano-Martín, Rodrigo Susial, Pedro Hernández, Teresa E. Fernández-Vicente, M. Carmen Martín, José J. Segovia

Abstract: This work presents phase envelope and speed of sound data for the (0.60 $CO_{2}$ + 0.40 $C_{3}H_{8}$) and (0.80 $CO_{2}$ + 0.20 $C_{3}H_{8}$) binary mixtures. Phase equilibria was measured using a cylindrical resonator working in the microwave band whereas an acoustic resonator was used for speed of sound measurements. The experimental results were compared with GERG-2008 equation of state, obtain… ▽ More This work presents phase envelope and speed of sound data for the (0.60 $CO_{2}$ + 0.40 $C_{3}H_{8}$) and (0.80 $CO_{2}$ + 0.20 $C_{3}H_{8}$) binary mixtures. Phase equilibria was measured using a cylindrical resonator working in the microwave band whereas an acoustic resonator was used for speed of sound measurements. The experimental results were compared with GERG-2008 equation of state, obtaining average absolute deviations by 0.24% in pressure for phase equilibria data and 0.025% for speed of sound data. Speed of sound values were used to derive perfect-gas heat capacities, acoustic virial coefficients, and second density virial coefficients. In addition, AGA8-DC92 equation of state performance was checked for the results derived from speeds of sound. △ Less

Submitted 6 September, 2024; originally announced September 2024.

Journal ref: The Journal of Chemical Thermodynamics Volume 158, 2021, 106464

Speed of sound data and acoustic virial coefficients of two binary ($N_{2}$ + $H_{2}$) mixtures at temperatures between (260 and 350) K and at pressures between (0.5 and 20) MPa

Authors: José J. Segovia, Daniel Lozano-Martín, Dirk Tuma, Alejandro Moreau, M. Carmen Martín, David Vega-Maza

Abstract: This work aims to address the technical concerns related to the thermodynamic characterization of gas mixtures blended with hydrogen for the implementation of hydrogen as a new energy vector. For this purpose, new experimental speed of sound measurements have been done in gaseous and supercritical phases of two binary mixtures of nitrogen and hydrogen using the most accurate technique available, i… ▽ More This work aims to address the technical concerns related to the thermodynamic characterization of gas mixtures blended with hydrogen for the implementation of hydrogen as a new energy vector. For this purpose, new experimental speed of sound measurements have been done in gaseous and supercritical phases of two binary mixtures of nitrogen and hydrogen using the most accurate technique available, i.e., the spherical acoustic resonator, yielding an experimental expanded ($k$ = 2) uncertainty of only 220 parts in $10^{6}$ (0.022%). The measurements cover the pressure range between (0.5 and 20) MPa, the temperature range between (260 and 350) K, and the composition range with a nominal mole percentage of hydrogen of (5 and 10) mol%, respectively. From the speed of sound data sets, thermophysical properties that are relevant for the characterization of the mixture, namely the second $β_{a}$ and third $γ_{a}$ acoustic virial coefficients, are derived. These results are thoroughly compared and discussed with the established reference mixture models valid for mixtures of nitrogen and hydrogen, such as the AGA8-DC92 EoS, the GERG-2008 EoS, and the recently developed adaptation of the GERG-2008 EoS, here denoted GERG-$H_{2}$_improved EoS. Special attention has been given to the effect of hydrogen concentration on those properties, showing that only the GERG-$H_{2}$_improved EoS is consistent with the data sets within the experimental uncertainty in most measuring conditions. △ Less

Submitted 5 September, 2024; originally announced September 2024.

Journal ref: The Journal of Chemical Thermodynamics Volume 171, 2022, 106791

Towards Efficient Modelling of String Dynamics: A Comparison of State Space and Koopman based Deep Learning Methods

Authors: Rodrigo Diaz, Carlos De La Vega Martin, Mark Sandler

Abstract: This paper presents an examination of State Space Models (SSM) and Koopman-based deep learning methods for modelling the dynamics of both linear and non-linear stiff strings. Through experiments with datasets generated under different initial conditions and sample rates, we assess the capacity of these models to accurately model the complex behaviours observed in string dynamics. Our findings indi… ▽ More This paper presents an examination of State Space Models (SSM) and Koopman-based deep learning methods for modelling the dynamics of both linear and non-linear stiff strings. Through experiments with datasets generated under different initial conditions and sample rates, we assess the capacity of these models to accurately model the complex behaviours observed in string dynamics. Our findings indicate that our proposed Koopman-based model performs as well as or better than other existing approaches in non-linear cases for long-sequence modelling. We inform the design of these architectures with the structure of the problems at hand. Although challenges remain in extending model predictions beyond the training horizon (i.e., extrapolation), the focus of our investigation lies in the models' ability to generalise across different initial conditions within the training time interval. This research contributes insights into the physical modelling of dynamical systems (in particular those addressing musical acoustics) by offering a comparative overview of these and previous methods and introducing innovative strategies for model improvement. Our results highlight the efficacy of these models in simulating non-linear dynamics and emphasise their wide-ranging applicability in accurately modelling dynamical systems over extended sequences. △ Less

Submitted 29 August, 2024; originally announced August 2024.

Comments: Accepted to DAFx2024

Dual-readout calorimetry with homogeneous crystals

Authors: R. Hirosky, T. Anderson, G. Cummings, M. Dubnowski, C. Guinto-Brody, Y. Guo, A. Ledovskoy, D. Levin, C. Madrid, C. Martin, J. Zhu

Abstract: High resolution calorimetry with state-of-the-art energy resolution performance for both electromagnetic (EM) and hadronic signals can be achieved using the dual-readout (DR) technique, both in a homogeneous scintillating-crystal calorimeter and in a traditional fiber and absorber-based DR hadronic section. We present results from the CalVision consortium studying the collection of Cerenkov and sc… ▽ More High resolution calorimetry with state-of-the-art energy resolution performance for both electromagnetic (EM) and hadronic signals can be achieved using the dual-readout (DR) technique, both in a homogeneous scintillating-crystal calorimeter and in a traditional fiber and absorber-based DR hadronic section. We present results from the CalVision consortium studying the collection of Cerenkov and scintillation signals in PbWO$_4$ and BGO crystal samples exposed to 120\,GeV proton beams at the Fermilab Test Beam Facility, including proof-of-principle measurements aimed at demonstrating the identification of a sufficiently large Cerenkov signal in homogeneous scintillating crystals to support dual-readout capability. △ Less

Submitted 21 August, 2024; originally announced August 2024.

Comments: 4 pages, 7 figures, Submitted to Proceedings of the contributions to the CALOR2024, EPJ Web of Conferences

Modelling the three-dimensional, diagnostic anisotropy field of an ice rise

Authors: A. Clara J. Henry, Carlos Martín, Reinhard Drews

Abstract: Polar ice develops anisotropic crystal orientation fabrics under deformation, yet ice is most often modelled as an isotropic fluid. We present three-dimensional simulations of the crystal orientation fabric of Derwael Ice Rise including the surrounding ice shelf using a crystal orientation tensor evolution equation corresponding to a fixed velocity field. We use a semi-Lagrangian numerical method… ▽ More Polar ice develops anisotropic crystal orientation fabrics under deformation, yet ice is most often modelled as an isotropic fluid. We present three-dimensional simulations of the crystal orientation fabric of Derwael Ice Rise including the surrounding ice shelf using a crystal orientation tensor evolution equation corresponding to a fixed velocity field. We use a semi-Lagrangian numerical method that constrains the degree of crystal orientation evolution to solve the equations in complex flow areas. We perform four simulations based on previous studies, altering the rate of evolution of the crystal anisotropy and its dependence on a combination of the strain rate and deviatoric stress tensors. We provide a framework for comparison with radar observations of the anisotropy field, outlining areas where the assumption of one vertical eigenvector may not hold and provide resulting errors in measured eigenvalues. We recognise the areas of high horizontal divergence at the ends of the flow divide as important areas to make comparisons with observations. Here, poorly constrained model parameters result in the largest difference in fabric type. These results are important in the planning of future campaigns for gathering data to constrain model parameters and as a link between observations and computationally-efficient, simplified models of anisotropy. △ Less

Submitted 2 August, 2024; originally announced August 2024.

Results for pixel and strip centimeter-scale AC-LGAD sensors with a 120 GeV proton beam

Authors: Irene Dutta, Christopher Madrid, Ryan Heller, Shirsendu Nanda, Danush Shekar, Claudio San Martín, Matías Barría, Artur Apresyan, Zhenyu Ye, William K. Brooks, Wei Chen, Gabriele D'Amen, Gabriele Giacomini, Alessandro Tricoli, Aram Hayrapetyan, Hakseong Lee, Ohannes Kamer Köseyan, Sergey Los, Koji Nakamura, Sayuka Kita, Tomoka Imamura, Cristían Peña, Si Xie

Abstract: We present the results of an extensive evaluation of strip and pixel AC-LGAD sensors tested with a 120 GeV proton beam, focusing on the influence of design parameters on the sensor temporal and spatial resolutions. Results show that reducing the thickness of pixel sensors significantly enhances their time resolution, with 20 $μ$m-thick sensors achieving around 20 ps. Uniform performance is attaina… ▽ More We present the results of an extensive evaluation of strip and pixel AC-LGAD sensors tested with a 120 GeV proton beam, focusing on the influence of design parameters on the sensor temporal and spatial resolutions. Results show that reducing the thickness of pixel sensors significantly enhances their time resolution, with 20 $μ$m-thick sensors achieving around 20 ps. Uniform performance is attainable with optimized sheet resistance, making these sensors ideal for future timing detectors. Conversely, 20 $μ$m-thick strip sensors exhibit higher jitter than similar pixel sensors, negatively impacting time resolution, despite reduced Landau fluctuations with respect to the 50 $μ$m-thick versions. Additionally, it is observed that a low resistivity in strip sensors limits signal size and time resolution, whereas higher resistivity improves performance. This study highlights the importance of tuning the n$^{+}$ sheet resistance and suggests that further improvements should target specific applications like the Electron-Ion Collider or other future collider experiments. In addition, the detailed performance of four AC-LGADs sensor designs is reported as examples of possible candidates for specific detector applications. These advancements position AC-LGADs as promising candidates for future 4D tracking systems, pending the development of specialized readout electronics. △ Less

Submitted 20 January, 2025; v1 submitted 13 July, 2024; originally announced July 2024.

Report number: FERMILAB-PUB-24-0355

Journal ref: Nucl. Instrum. Methods Phys. Res. A (2025), 170224

Inferring interaction potentials from stochastic particle trajectories

Authors: Ella M. King, Megan C. Engel, Caroline Martin, Alp M. Sunol, Qian-Ze Zhu, Sam S. Schoenholz, Vinothan N. Manoharan, Michael P. Brenner

Abstract: Accurate interaction potentials between microscopic components such as colloidal particles or cells are crucial to understanding a range of processes, including colloidal crystallization, bacterial colony formation, and cancer metastasis. Even in systems where the precise interaction mechanisms are unknown, effective interactions can be measured to inform simulation and design. However, these meas… ▽ More Accurate interaction potentials between microscopic components such as colloidal particles or cells are crucial to understanding a range of processes, including colloidal crystallization, bacterial colony formation, and cancer metastasis. Even in systems where the precise interaction mechanisms are unknown, effective interactions can be measured to inform simulation and design. However, these measurements are difficult and time-intensive, and often require conditions that are drastically different from in situ conditions of the system of interest. Moreover, existing methods of measuring interparticle potentials rely on constraining a small number of particles at equilibrium, placing limits on which interactions can be measured. We introduce a method for inferring interaction potentials directly from trajectory data of interacting particles. We explicitly solve the equations of motion to find a form of the potential that maximizes the probability of observing a known trajectory. Our method is valid for systems both in and out of equilibrium, is well-suited to large numbers of particles interacting in typical system conditions, and does not assume a functional form of the interaction potential. We apply our method to infer the interactions of colloidal spheres from experimental data, successfully extracting the range and strength of a depletion interaction from the motion of the particles. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Liouville-type results for time-dependent stratified water flows over variable bottom in the $β$-plane approximation

Authors: Calin Martin

Abstract: We consider here time-dependent three-dimensional stratified geophysical water flows of finite depth over a variable bottom with a free surface and an interface (separating two layers of constant and different densities). Under the assumption that the vorticity vectors in the two layers are constant, we prove that bounded solutions to the three-dimensional water waves equations in the $β$-plane ap… ▽ More We consider here time-dependent three-dimensional stratified geophysical water flows of finite depth over a variable bottom with a free surface and an interface (separating two layers of constant and different densities). Under the assumption that the vorticity vectors in the two layers are constant, we prove that bounded solutions to the three-dimensional water waves equations in the $β$-plane approximation exist if and only if one of the horizontal components of the velocity, as well as its vertical component, are zero; the other horizontal component being constant. Moreover, the interface is flat, the free surface has a traveling character in the horizontal direction of the nonvanishing velocity component, being of general type in the other horizontal direction, and the pressure is hydrostatic in both layers. Unlike previous studies of three-dimensional flows with constant vorticity in each layer, we consider a non-flat bottom boundary and different constant vorticity vectors for the upper and lower layer. △ Less

Submitted 10 October, 2023; originally announced October 2023.

MSC Class: 35A01; 35Q35; 35R35; 76B15; 76B70

Journal ref: Physics of Fluids, 2023

Precise characterization of nanometer-scale systems using interferometric scattering microscopy and Bayesian analysis

Authors: Xander M. de Wit, Amelia W. Paine, Caroline Martin, Aaron M. Goldfain, Rees F. Garmann, Vinothan N. Manoharan

Abstract: Interferometric scattering microscopy (iSCAT) can image the dynamics of nanometer-scale systems. The typical approach to analyzing interferometric images involves intensive processing, which discards data and limits the precision of measurements. We demonstrate an alternative approach: modeling the interferometric point spread function (iPSF) and fitting this model to data within a Bayesian framew… ▽ More Interferometric scattering microscopy (iSCAT) can image the dynamics of nanometer-scale systems. The typical approach to analyzing interferometric images involves intensive processing, which discards data and limits the precision of measurements. We demonstrate an alternative approach: modeling the interferometric point spread function (iPSF) and fitting this model to data within a Bayesian framework. This approach yields best-fit parameters, including the particle's three-dimensional position and polarizability, as well as uncertainties and correlations between these parameters. Building on recent work, we develop a model that is parameterized for rapid fitting. The model is designed to work with Hamiltonian Monte Carlo techniques that leverage automatic differentiation. We validate this approach by fitting the model to interferometric images of colloidal nanoparticles. We apply the method to track a diffusing particle in three dimensions, to directly infer the diffusion coefficient of a nanoparticle without calculating a mean-square displacement, and to quantify the ejection of DNA from an individual lambda phage virus, demonstrating that the approach can be used to infer both static and dynamic properties of nanoscale systems. △ Less

Submitted 12 September, 2023; v1 submitted 4 July, 2023; originally announced July 2023.

Journal ref: Applied Optics 62, 7205-7215 (2023)

FIB-SEM investigation and uniaxial compression of flexible graphite

Authors: Emanuele Solfiti, Di Wan, Ambra Celotto, Nicola Solieri, Pablo Andreu Munoz, Rui Franqueira Ximenes, Jorge Maestre Heredia, Claudio Leopoldo Torregrosa Martin, Antonio Perillo Marcone Francois-Xavier Nuiry, Antonio Alvaro, Filippo Berto, Marco Calviani

Abstract: Flexible graphite (FG) with 1 - 1.2 g/cm$^3$ density is employed as beam energy absorber material in the CERN's Large Hadron Collider (LHC) beam dumping system. However, the increase of energy deposited expected for new HL-LHC (High-Luminosity LHC) design demanded for an improvement in reliability and safety of beam dumping devices, and the need for a calibrated material model suitable for high-le… ▽ More Flexible graphite (FG) with 1 - 1.2 g/cm$^3$ density is employed as beam energy absorber material in the CERN's Large Hadron Collider (LHC) beam dumping system. However, the increase of energy deposited expected for new HL-LHC (High-Luminosity LHC) design demanded for an improvement in reliability and safety of beam dumping devices, and the need for a calibrated material model suitable for high-level FE simulations has been prioritized. This work sets the basic knowledge to develop a material model for FG suitable to this aim. A review of the FG properties available in literature is first given, followed by FIB-SEM (Focused Ion Beam - Scanning Electron Microscopy) microstructure investigation and monotonic and cyclic uniaxial compression tests. Similarities with other well-known groups of materials such as crushable foams, crumpled materials and compacted powders have been discussed. A simple 1D phenomenological model has been used to fit the experimental stress-strain curves and the accuracy of the result supports the assumptions that the graphite-like microstructure and the crumpled meso-structure play the major role under out-of-plane uniaxial compression. △ Less

Submitted 8 April, 2023; originally announced April 2023.

Comments: Pre-print template, 57 pages, 14 figures

A-BASE-DE-PROS: una implementación práctica de los Objetivos de Desarrollo Sostenible en la Universidad Politécnica de Madrid

Authors: Patricia Almendros, Silvia Otegui, Alejandro Nares, Laura del Fresno, Javier Ablanque, Irene Blanco, Juan Ramón Ferrer, Sonia Benito, Carmen Lopez, Sonia García, León Fernández, Sergio Zubelzu, Raúl Sánchez, Paloma Esteve, Rosa María Benito, Juan Carlos Losada, Antonio Saa, Gabriel Gascó, Ana M. Méndez, Mónica Montoya, Marina de Francisco, Jesús Ruiz, Samuel Seoanez, Sara Castilla, Dámaris Fuente , et al. (24 additional authors not shown)

Abstract: The influence of the Sustainable Development Goals (SDGs) has been widely spread over the last years, establishing new public and privat policies. Education has also been experiencing this change by aligning with the previous goals. In this chapter, we briefly summarize the main activities conducted under the Grant APS22.2003 'Service-based learning of the SDGs related to a responsible production… ▽ More The influence of the Sustainable Development Goals (SDGs) has been widely spread over the last years, establishing new public and privat policies. Education has also been experiencing this change by aligning with the previous goals. In this chapter, we briefly summarize the main activities conducted under the Grant APS22.2003 'Service-based learning of the SDGs related to a responsible production and consumption (A-BASE-DE-PROS)', which uses the SDG 12 as a guide line to raise the awareness of the importance of the 2030 Agenda among undergraduate and secondary-school students. In general, the service-based learning has increased the knowledge of the SDGs among the students. Furthermore, most of the (university and secondary) students found the service-learning △ Less

Submitted 27 February, 2023; originally announced February 2023.

Comments: 8 pages, in Spanish language, 8 figures

Wrinkling and crumpling in twisted few and multilayer CVD graphene: High density of edge modes influencing Raman spectra

Authors: D. Nikolaievskyi, M. Torregrosa, A. Merlen, S. Clair, O. Chuzel, J. -L. Parrain, T. Neisus, A. Campos, M. Cabie, C. Martin, C. Pardanaud

Abstract: Richness and complexity of Raman spectra related to graphene materials is established from years to decades, with, among others: the well-known G, D, 2D,... bands plus a plethora of weaker bands related to disorder behavior, doping, stress, crystal orientation or stacking information. Herein, we report on how to detect crumpling effects in Raman spectra, using a large variety of few and multilayer… ▽ More Richness and complexity of Raman spectra related to graphene materials is established from years to decades, with, among others: the well-known G, D, 2D,... bands plus a plethora of weaker bands related to disorder behavior, doping, stress, crystal orientation or stacking information. Herein, we report on how to detect crumpling effects in Raman spectra, using a large variety of few and multilayer graphene. The main finding is that these crumples enhance the G band intensity like it does with twisted bi layer graphene. We updated the D over G band intensity ratio versus G band width plot, which is generally used to disentangle point and linear defects origin, by reporting surface defects created by crumples. Moreover, we report for the first time on the existence 23 resonant additional bands at 633 nm. We attribute them to edge modes formed by high density of crumples. We use Raman plots (2D bands versus G band positions and widths) to gain qualitative information about the way layers are stacked. △ Less

Submitted 7 December, 2022; originally announced December 2022.

Comments: Carbon, 2022

First survey of centimeter-scale AC-LGAD strip sensors with a 120 GeV proton beam

Authors: Christopher Madrid, Ryan Heller, Claudio San Martín, Shirsendu Nanda, Artur Apresyan, William K. Brooks, Wei Chen, Gabriele Giacomini, Ohannes Kamer Köseyan, Sergey Los, Cristián Peña, René Rios, Alessandro Tricoli, Si Xie, Zhenyu Ye

Abstract: We present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility and sensors manufactured by the Brookhaven National Laboratory. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-bas… ▽ More We present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility and sensors manufactured by the Brookhaven National Laboratory. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-based particle experiments. A survey of sensor designs is presented, with the aim of optimizing the electrode geometry for spatial resolution and timing performance. Several design considerations are discussed towards maintaining desirable signal characteristics with increasingly larger electrodes. The resolutions obtained with several prototypes are presented, reaching simultaneous 18 micron and 32 ps resolutions from strips of 1 cm length and 500 micron pitch. With only slight modifications, these sensors would be ideal candidates for a 4D timing layer at the EIC. △ Less

Submitted 20 April, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

Dynamics, scaling behavior, and control of nuclear wrinkling

Authors: Jonathan A. Jackson, Nicolas Romeo, Alexander Mietke, Keaton J. Burns, Jan F. Totz, Adam C. Martin, Jörn Dunkel, Jasmin Imran Alsous

Abstract: The cell nucleus is enveloped by a complex membrane, whose wrinkling has been implicated in disease and cellular aging. The biophysical dynamics and spectral evolution of nuclear wrinkling during multicellular development remain poorly understood due to a lack of direct quantitative measurements. Here, we combine live-imaging experiments, theory, and simulations to characterize the onset and dynam… ▽ More The cell nucleus is enveloped by a complex membrane, whose wrinkling has been implicated in disease and cellular aging. The biophysical dynamics and spectral evolution of nuclear wrinkling during multicellular development remain poorly understood due to a lack of direct quantitative measurements. Here, we combine live-imaging experiments, theory, and simulations to characterize the onset and dynamics of nuclear wrinkling during egg development in the fruit fly, Drosophila melanogaster, when nurse cell nuclei increase in size and display stereotypical wrinkling behavior. A spectral analysis of three-dimensional high-resolution data from several hundred nuclei reveals a robust asymptotic power-law scaling of angular fluctuations consistent with renormalization and scaling predictions from a nonlinear elastic shell model. We further demonstrate that nuclear wrinkling can be reversed through osmotic shock and suppressed by microtubule disruption, providing tunable physical and biological control parameters for probing mechanical properties of the nuclear envelope. Our findings advance the biophysical understanding of nuclear membrane fluctuations during early multicellular development. △ Less

Submitted 25 June, 2023; v1 submitted 20 October, 2022; originally announced October 2022.

Comments: Main text: 10 pages, 3 figures. SI: 19 pages, 10 figures, 1 table

Journal ref: Nat. Phys. 19, 1927-1935 (2023)

What's for Lunch? A systematic ordering of foods in the Soup-Salad-Sandwich phase space

Authors: Madelyn Leembruggen, Caroline Martin

Abstract: The statistical physics of phase transitions has been hugely successful at describing numerous natural, physical, and technological phenomena, and now a rigorous examination of the phase space of the culinary regime is likewise ripe for the picking. Despite great demand for the resolution of many scientific debates over the taxonomy of food, past attempts have failed to account for complex phase b… ▽ More The statistical physics of phase transitions has been hugely successful at describing numerous natural, physical, and technological phenomena, and now a rigorous examination of the phase space of the culinary regime is likewise ripe for the picking. Despite great demand for the resolution of many scientific debates over the taxonomy of food, past attempts have failed to account for complex phase behavior and co-existence, and have thus left the public hungry for a more substantial theory. By applying the principles of statistical physics and thermodynamics, we here map out the complete phase space of all culinary dishes and find three distinct phase regimes: Soup, Salad, and Sandwich. We consider the effect of different state variables on these phase boundaries, as well as regions of co-existence and triple points. With this complete 3-dimensional phase diagram of all foods, we can conclusively answer many bitter debates, including the imperishable question "is a hotdog a sandwich?" The answer: yes. △ Less

Submitted 30 March, 2022; originally announced March 2022.

Comments: 7 pages, 5 figures

Hamiltonian approach to modelling interfacial internal waves over variable bottom

Authors: Rossen I. Ivanov, Calin I. Martin, Michail D. Todorov

Abstract: We study the effects of an uneven bottom on the internal wave propagation in the presence of stratification and underlying non-uniform currents. Thus, the presented models incorporate vorticity (wave-current interactions), geophysical effects (Coriolis force) and a variable bathymetry. An example of the physical situation described above is well illustrated by the equatorial internal waves in the… ▽ More We study the effects of an uneven bottom on the internal wave propagation in the presence of stratification and underlying non-uniform currents. Thus, the presented models incorporate vorticity (wave-current interactions), geophysical effects (Coriolis force) and a variable bathymetry. An example of the physical situation described above is well illustrated by the equatorial internal waves in the presence of the Equatorial Undercurrent (EUC). We find that the interface (physically coinciding with the thermocline and the pycnocline) satisfies in the long wave approximation a KdV-mKdV type equation with variable coefficients. The soliton propagation over variable depth leads to effects such as soliton fission, which is analysed and studied numerically as well. △ Less

Submitted 4 March, 2022; originally announced March 2022.

Comments: LaTeX, 37 pages, 7 figures

MSC Class: 76B55; 76B25; 37K10

Journal ref: Physica D: Nonlinear Phenomena, Volume 433 (2022) 133190 (open access)

Characterization of BNL and HPK AC-LGAD sensors with a 120 GeV proton beam

Authors: Ryan Heller, Christopher Madrid, Artur Apresyan, William K. Brooks, Wei Chen, Gabriele D'Amen, Gabriele Giacomini, Ikumi Goya, Kazuhiko Hara, Sayuka Kita, Sergey Los, Adam Molnar, Koji Nakamura, Cristián Peña, Claudio San Martín, Alessandro Tricoli, Tatsuki Ueda, Si Xie

Abstract: We present measurements of AC-LGADs performed at the Fermilab's test beam facility using 120 GeV protons. We studied the performance of various strip and pad AC-LGAD sensors that were produced by BNL and HPK. The measurements are performed with our upgraded test beam setup that utilizes a high precision telescope tracker, and a simultaneous readout of up to 7 channels per sensor, which allows deta… ▽ More We present measurements of AC-LGADs performed at the Fermilab's test beam facility using 120 GeV protons. We studied the performance of various strip and pad AC-LGAD sensors that were produced by BNL and HPK. The measurements are performed with our upgraded test beam setup that utilizes a high precision telescope tracker, and a simultaneous readout of up to 7 channels per sensor, which allows detailed studies of signal sharing characteristics. These measurements allow us to assess the differences in designs between different manufacturers, and optimize them based on experimental performance. We then study several reconstruction algorithms to optimize position and time resolutions that utilize the signal sharing properties of each sensor. We present a world's first demonstration of silicon sensors in a test beam that simultaneously achieve better than 6-10 micron position and 30 ps time resolution. This represents a substantial improvement to the spatial resolution than would be obtained with binary readout of sensors with similar pitch. △ Less

Submitted 29 March, 2022; v1 submitted 19 January, 2022; originally announced January 2022.

EP-PINNs: Cardiac Electrophysiology Characterisation using Physics-Informed Neural Networks

Authors: Clara Herrero Martin, Alon Oved, Rasheda A Chowdhury, Elisabeth Ullmann, Nicholas S Peters, Anil A Bharath, Marta Varela

Abstract: Accurately inferring underlying electrophysiological (EP) tissue properties from action potential recordings is expected to be clinically useful in the diagnosis and treatment of arrhythmias such as atrial fibrillation, but it is notoriously difficult to perform. We present EP-PINNs (Physics-Informed Neural Networks), a novel tool for accurate action potential simulation and EP parameter estimatio… ▽ More Accurately inferring underlying electrophysiological (EP) tissue properties from action potential recordings is expected to be clinically useful in the diagnosis and treatment of arrhythmias such as atrial fibrillation, but it is notoriously difficult to perform. We present EP-PINNs (Physics-Informed Neural Networks), a novel tool for accurate action potential simulation and EP parameter estimation, from sparse amounts of EP data. We demonstrate, using 1D and 2D in silico data, how EP-PINNs are able to reconstruct the spatio-temporal evolution of action potentials, whilst predicting parameters related to action potential duration (APD), excitability and diffusion coefficients. EP-PINNs are additionally able to identify heterogeneities in EP properties, making them potentially useful for the detection of fibrosis and other localised pathology linked to arrhythmias. Finally, we show EP-PINNs effectiveness on biological in vitro preparations, by characterising the effect of anti-arrhythmic drugs on APD using optical mapping data. EP-PINNs are a promising clinical tool for the characterisation and potential treatment guidance of arrhythmias. △ Less

Submitted 14 December, 2021; originally announced December 2021.

Long-Lived Highly Emissive MOFs as Potential Candidates for Multiphotonic Applications

Authors: Mario Gutiérrez, Cristina Martín, Johan Hofkens, Jin-Chong Tan

Abstract: Long-lived emissive materials based on room temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF) are considered as the cornerstone of the development of optical sensors, security systems and solid-state lighting. Nevertheless, molecular systems with these properties are scarce because most of them suffer from aggregation caused quenching emission (ACQ). One approac… ▽ More Long-lived emissive materials based on room temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF) are considered as the cornerstone of the development of optical sensors, security systems and solid-state lighting. Nevertheless, molecular systems with these properties are scarce because most of them suffer from aggregation caused quenching emission (ACQ). One approach to address this shortcoming is by inhibiting the molecular motions/vibrations by employing a fixed matrix as afforded by a metal-organic framework (MOF). There, the organic chromophores are confined in a crystalline framework, and the structure-property relationship can be designed to get RTP/TADF. Inspired by this, the present work explores the relation between the linker arrangement and the physicochemical properties of two isochemical MOFs with different crystalline structures. The denser MOF exhibits a long-lived green RTP due to a hyperfine coupling of the linkers. On the other hand, the more porous MOF presents a long-lived temperature-dependent turquoise emission, reflecting the influence of the TADF. Hence, this study provides a huge advance about the potential of MOFs to undergo RTP and TADF emission, and at the same time, demonstrates their potential applicability in a wide range of photonic technologies, including physical and chemical sensing and the first example of a MOF-LED based on RTP-MOFs. △ Less

Submitted 20 October, 2021; originally announced October 2021.

Comments: 7 pages, 4 Figures

D retention and material defects probed using Raman microscopy in JET limiter samples and beryllium-based synthesized samples

Authors: C Pardanaud, M Kumar, P Roubin, C Martin, Y Ferro, J Denis, A Widdowson, D Douai, M Baldwin, A Založnik, C Lungu, C Porosnicu, P Dinca, T Dittmar, A Hakola

Abstract: We report on the detection by means of Raman spectroscopy of amorphous beryllium deuteride, BeD 2 , in magnetron sputtered deposits synthesized in two different laboratories and containing about 20 at.% of deuterium. In contrast, this signature has not been found for the JET limiter samples studied coming from the inner, outer or upper limiters, even when coming from a deposition zone of the limit… ▽ More We report on the detection by means of Raman spectroscopy of amorphous beryllium deuteride, BeD 2 , in magnetron sputtered deposits synthesized in two different laboratories and containing about 20 at.% of deuterium. In contrast, this signature has not been found for the JET limiter samples studied coming from the inner, outer or upper limiters, even when coming from a deposition zone of the limiters. We give a way to disentangle that BeD 2 signature from other signatures falling in the same spectroscopic range and mainly related to other phenomena. We also analyze the Raman characteristics of the JET sample defects. These results could help in the interpretation of D thermal desorption spectra and in future analyses of JET thick Be deposit divertor tiles. △ Less

Submitted 30 September, 2021; originally announced September 2021.

Journal ref: Physica Scripta, IOP Publishing, 2021, 96 (12), pp.124031

The Long Period of 3He-rich Solar Energetic Particles Measured by Solar Orbiter on 2020 November 17-23

Authors: R. Bucik, G. M. Mason, R. Gomez-Herrero, D. Lario, L. Balmaceda, N. V. Nitta, V. Krupar, N. Dresing, G. C. Ho, R. C. Allen, F. Carcaboso, J. Rodriguez-Pacheco, F. Schuller, A. Warmuth, R. F. Wimmer-Schweingruber, J. L. Freiherr von Forstner, G. B. Andrews, L. Berger, I. Cernuda, F. Espinosa Lara, W. J. Lees, C. Martin, D. Pacheco, M. Prieto, S. Sanchez-Prieto , et al. (9 additional authors not shown)

Abstract: We report observations of a relatively long period of 3He-rich solar energetic particles (SEPs) measured by Solar Orbiter. The period consists of several well-resolved ion injections. The high-resolution STEREO-A imaging observations reveal that the injections coincide with EUV jets/brightenings near the east limb, not far from the nominal magnetic connection of Solar Orbiter. The jets originated… ▽ More We report observations of a relatively long period of 3He-rich solar energetic particles (SEPs) measured by Solar Orbiter. The period consists of several well-resolved ion injections. The high-resolution STEREO-A imaging observations reveal that the injections coincide with EUV jets/brightenings near the east limb, not far from the nominal magnetic connection of Solar Orbiter. The jets originated in two adjacent, large, and complex active regions as observed by the Solar Dynamics Observatory when the regions rotated to the Earth's view. It appears that the sustained ion injections were related to the complex configuration of the sunspot group and the long period of 3He-rich SEPs to the longitudinal extent covered by the group during the analyzed time period. △ Less

Submitted 12 September, 2021; originally announced September 2021.

Comments: accepted for publication in A&A, Letters to the Editor

Journal ref: A&A 656, L11 (2021)

First year of energetic particle measurements in the inner heliosphere with Solar Orbiter's Energetic Particle Detector

Authors: R. F. Wimmer-Schweingruber, N. Janitzek, D. Pacheco, I. Cernuda, F. Espinosa Lara, R. Gómez-Herrero, G. M. Mason, R. C. Allen, Z. G. Xu, F. Carcaboso, A. Kollhoff, P. Kühl, J. L. Freiherr von Forstner, L. Berger, J. Rodriguez-Pacheco, G. C. Ho, G. B. Andrews, V. Angelini, A. Aran, S. Boden, S. I. Böttcher, A. Carrasco, N. Dresing, S. Eldrum, R. Elftmann , et al. (23 additional authors not shown)

Abstract: Solar Orbiter strives to unveil how the Sun controls and shapes the heliosphere and fills it with energetic particle radiation. To this end, its Energetic Particle Detector (EPD) has now been in operation, providing excellent data, for just over a year. EPD measures suprathermal and energetic particles in the energy range from a few keV up to (near-) relativistic energies (few MeV for electrons an… ▽ More Solar Orbiter strives to unveil how the Sun controls and shapes the heliosphere and fills it with energetic particle radiation. To this end, its Energetic Particle Detector (EPD) has now been in operation, providing excellent data, for just over a year. EPD measures suprathermal and energetic particles in the energy range from a few keV up to (near-) relativistic energies (few MeV for electrons and about 500 MeV/nuc for ions). We present an overview of the initial results from the first year of operations and we provide a first assessment of issues and limitations. During this first year of operations of the Solar Orbiter mission, EPD has recorded several particle events at distances between 0.5 and 1 au from the Sun. We present dynamic and time-averaged energy spectra for ions that were measured with a combination of all four EPD sensors, namely: the SupraThermal Electron and Proton sensor (STEP), the Electron Proton Telescope (EPT), the Suprathermal Ion Spectrograph (SIS), and the High-Energy Telescope (HET) as well as the associated energy spectra for electrons measured with STEP and EPT. We illustrate the capabilities of the EPD suite using the 10-11 December 2020 solar particle event. This event showed an enrichment of heavy ions as well as $^3$He, for which we also present dynamic spectra measured with SIS. The high anisotropy of electrons at the onset of the event and its temporal evolution is also shown using data from these sensors. We discuss the ongoing in-flight calibration and a few open instrumental issues using data from the 21 July and the 10-11 December 2020 events and give guidelines and examples for the usage of the EPD data. We explain how spacecraft operations may affect EPD data and we present a list of such time periods in the appendix. A list of the most significant particle enhancements as observed by EPT during this first year is also provided. △ Less

Submitted 4 August, 2021; originally announced August 2021.

Journal ref: A&A 656, A22 (2021)

Estimating covariant Lyapunov vectors from data

Authors: Christoph Martin, Nahal Sharafi, Sarah Hallerberg

Abstract: Covariant Lyapunov vectors characterize the directions along which perturbations in dynamical systems grow. They have also been studied as predictors of critical transitions and extreme events. For many applications like, for example, prediction, it is necessary to estimate the vectors from data since model equations are unknown for many interesting phenomena. We propose a novel method for estimat… ▽ More Covariant Lyapunov vectors characterize the directions along which perturbations in dynamical systems grow. They have also been studied as predictors of critical transitions and extreme events. For many applications like, for example, prediction, it is necessary to estimate the vectors from data since model equations are unknown for many interesting phenomena. We propose a novel method for estimating covariant Lyapunov vectors based on data records without knowing the underlying equations of the system. In contrast to previous approaches, our approach can be applied to high-dimensional data-sets. We demonstrate that this purely data-driven approach can accurately estimate covariant Lyapunpov vectors from data records generated by low and high-dimensional dynamical systems. The highest dimension of a time-series from which covariant Lyapunov vectors were estimated in this contribution is 128. Being able to infer covariant Lyapunov vectors from data-records could encourage numerous future applications in data-analysis and data-based predictions. △ Less

Submitted 11 October, 2021; v1 submitted 16 July, 2021; originally announced July 2021.

Azimuthal equatorial flows in spherical coordinates with discontinuous stratification

Authors: Calin Martin

Abstract: We are concerned here with an exact solution to the governing equations for geophysical fluid dynamics in spherical coordinates which incorporates discontinuous fluid stratification. This solution represents a steady, purely--azimuthal equatorial flow with an associated free-surface and an interface separating two fluid regions, each of which having its own continuous distribution of density. Howe… ▽ More We are concerned here with an exact solution to the governing equations for geophysical fluid dynamics in spherical coordinates which incorporates discontinuous fluid stratification. This solution represents a steady, purely--azimuthal equatorial flow with an associated free-surface and an interface separating two fluid regions, each of which having its own continuous distribution of density. However, the two density functions do not match along the interface. Following the derivation of the solution we demonstrate that there is a well-defined relationship between the imposed pressure at the free-surface and the resulting distortion of the surface's shape. Moreover, imposing the continuity of the pressure along the interface generates an equation that describes (implicitly) the shape of the interface. Interestingly, it turns out that the interface defining function has infinite regularity. △ Less

Submitted 24 June, 2021; originally announced June 2021.

Comments: 3 figures

MSC Class: 35Q31; 35Q35; 35Q86; 35R35; 76E20

Journal ref: Physics of Fluids, 2021

First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors

Authors: ALICE ITS project, :, G. Aglieri Rinella, M. Agnello, B. Alessandro, F. Agnese, R. S. Akram, J. Alme, E. Anderssen, D. Andreou, F. Antinori, N. Apadula, P. Atkinson, R. Baccomi, A. Badalà, A. Balbino, C. Bartels, R. Barthel, F. Baruffaldi, I. Belikov, S. Beole, P. Becht, A. Bhatti, M. Bhopal, N. Bianchi , et al. (230 additional authors not shown)

Abstract: A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to ra… ▽ More A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to radii of about 2cm without any signs of mechanical or electrical damage. During a subsequent characterisation using a 5.4GeV electron beam, it was further confirmed that they preserve their full electrical functionality as well as particle detection performance. In this article, the bending procedure and the setup used for characterisation are detailed. Furthermore, the analysis of the beam test, including the measurement of the detection efficiency as a function of beam position and local inclination angle, is discussed. The results show that the sensors maintain their excellent performance after bending to radii of 2cm, with detection efficiencies above 99.9% at typical operating conditions, paving the way towards a new class of detectors with unprecedented low material budget and ideal geometrical properties. △ Less

Submitted 17 August, 2021; v1 submitted 27 May, 2021; originally announced May 2021.

Improving holographic particle characterization by modeling spherical aberration

Authors: Caroline Martin, Brian Leahy, Vinothan Manoharan

Abstract: Holographic microscopy combined with forward modeling and inference allows colloidal particles to be characterized and tracked in three dimensions with high precision. However, current models ignore the effects of optical aberrations on hologram formation. We investigate the effects of spherical aberration on the structure of single-particle holograms and on the accuracy of particle characterizati… ▽ More Holographic microscopy combined with forward modeling and inference allows colloidal particles to be characterized and tracked in three dimensions with high precision. However, current models ignore the effects of optical aberrations on hologram formation. We investigate the effects of spherical aberration on the structure of single-particle holograms and on the accuracy of particle characterization. We find that in a typical experimental setup, spherical aberration can result in systematic shifts of about 2% in the inferred refractive index and radius. We show that fitting with a model that accounts for spherical aberration decreases this aberration-dependent error by a factor of two or more, even when the level of spherical aberration in the optical train is unknown. With the new generative model, the inferred parameters are consistent across different levels of aberration, making particle characterization more robust. △ Less

Submitted 25 May, 2021; originally announced May 2021.

Hybrid Machine Learning for Scanning Near-field Optical Spectroscopy

Authors: Xinzhong Chen, Ziheng Yao, Suheng Xu, A. S. McLeod, Stephanie N. Gilbert Corder, Yueqi Zhao, Makoto Tsuneto, Hans A. Bechtel, Michael C. Martin, G. L. Carr, M. M. Fogler, Stefan G. Stanciu, D. N. Basov, Mengkun Liu

Abstract: The underlying physics behind an experimental observation often lacks a simple analytical description. This is especially the case for scanning probe microscopy techniques, where the interaction between the probe and the sample is nontrivial. Realistic modeling to include the details of the probe is always exponentially more difficult than its "spherical cow" counterparts. On the other hand, a wel… ▽ More The underlying physics behind an experimental observation often lacks a simple analytical description. This is especially the case for scanning probe microscopy techniques, where the interaction between the probe and the sample is nontrivial. Realistic modeling to include the details of the probe is always exponentially more difficult than its "spherical cow" counterparts. On the other hand, a well-trained artificial neural network based on real data can grasp the hidden correlation between the signal and sample properties. In this work, we show that, via a combination of model calculation and experimental data acquisition, a physics-infused hybrid neural network can predict the tip-sample interaction in the widely used scattering-type scanning near-field optical microscope. This hybrid network provides a long-sought solution for accurate extraction of material properties from tip-specific raw data. The methodology can be extended to other scanning probe microscopy techniques as well as other data-oriented physical problems in general. △ Less

Submitted 21 May, 2021; originally announced May 2021.

THz Near-Field Imaging of Extreme Subwavelength Metal Structures

Authors: Xinzhong Chen, Xiao Liu, Xiangdong Guo, Shu Chen, Hai Hu, Elizaveta Nikulina, Xinlin Ye, Ziheng Yao, Hans A. Bechtel, Michael C. Martin, G. Lawrence Carr, Qing Dai, Songlin Zhuang, Qing Hu, Yiming Zhu, Rainer Hillenbrand, Mengkun Liu, Guanjun You

Abstract: Modern scattering-type scanning near-field optical microscopy (s-SNOM) has become an indispensable tool in material research. However, as the s-SNOM technique marches into the far-infrared (IR) and terahertz (THz) regimes, emerging experiments sometimes produce puzzling results. For example, anomalies in the near-field optical contrast have been widely reported. In this Letter, we systematically i… ▽ More Modern scattering-type scanning near-field optical microscopy (s-SNOM) has become an indispensable tool in material research. However, as the s-SNOM technique marches into the far-infrared (IR) and terahertz (THz) regimes, emerging experiments sometimes produce puzzling results. For example, anomalies in the near-field optical contrast have been widely reported. In this Letter, we systematically investigate a series of extreme subwavelength metallic nanostructures via s-SNOM near-field imaging in the GHz to THz frequency range. We find that the near-field material contrast is greatly impacted by the lateral size of the nanostructure, while the spatial resolution is practically independent of it. The contrast is also strongly affected by the connectivity of the metallic structures to a larger metallic ground plane. The observed effect can be largely explained by a quasi-electrostatic analysis. We also compare the THz s-SNOM results to those of the mid-IR regime, where the size-dependence becomes significant only for smaller structures. Our results reveal that the quantitative analysis of the near-field optical material contrasts in the long-wavelength regime requires a careful assessment of the size and configuration of metallic (optically conductive) structures. △ Less

Submitted 18 May, 2021; originally announced May 2021.

Journal ref: ACS Photonics 2020, 7, 3, 687-694

Radial Evolution of the April 2020 Stealth Coronal Mass Ejection between 0.8 and 1 AU -- A Comparison of Forbush Decreases at Solar Orbiter and Earth

Authors: Johan L. Freiherr von Forstner, Mateja Dumbović, Christian Möstl, Jingnan Guo, Athanasios Papaioannou, Robert Elftmann, Zigong Xu, Jan Christoph Terasa, Alexander Kollhoff, Robert F. Wimmer-Schweingruber, Javier Rodríguez-Pacheco, Andreas J. Weiss, Jürgen Hinterreiter, Tanja Amerstorfer, Maike Bauer, Anatoly V. Belov, Maria A. Abunina, Timothy Horbury, Emma E. Davies, Helen O'Brien, Robert C. Allen, G. Bruce Andrews, Lars Berger, Sebastian Boden, Ignacio Cernuda Cangas , et al. (18 additional authors not shown)

Abstract: Aims. We present observations of the first coronal mass ejection (CME) observed at the Solar Orbiter spacecraft on April 19, 2020, and the associated Forbush decrease (FD) measured by its High Energy Telescope (HET). This CME is a multispacecraft event also seen near Earth the next day. Methods. We highlight the capabilities of HET for observing small short-term variations of the galactic cosmic r… ▽ More Aims. We present observations of the first coronal mass ejection (CME) observed at the Solar Orbiter spacecraft on April 19, 2020, and the associated Forbush decrease (FD) measured by its High Energy Telescope (HET). This CME is a multispacecraft event also seen near Earth the next day. Methods. We highlight the capabilities of HET for observing small short-term variations of the galactic cosmic ray count rate using its single detector counters. The analytical ForbMod model is applied to the FD measurements to reproduce the Forbush decrease at both locations. Input parameters for the model are derived from both in situ and remote-sensing observations of the CME. Results. The very slow (~350 km/s) stealth CME caused a FD with an amplitude of 3 % in the low-energy cosmic ray measurements at HET and 2 % in a comparable channel of the Cosmic Ray Telescope for the Effects of Radiation (CRaTER) on the Lunar Reconnaissance Orbiter, as well as a 1 % decrease in neutron monitor measurements. Significant differences are observed in the expansion behavior of the CME at different locations, which may be related to influence of the following high speed solar wind stream. Under certain assumptions, ForbMod is able to reproduce the observed FDs in low-energy cosmic ray measurements from HET as well as CRaTER, but with the same input parameters, the results do not agree with the FD amplitudes at higher energies measured by neutron monitors on Earth. We study these discrepancies and provide possible explanations. Conclusions. This study highlights that the novel measurements of the Solar Orbiter can be coordinated with other spacecraft to improve our understanding of space weather in the inner heliosphere. Multi-spacecraft observations combined with data-based modeling are also essential to understand the propagation and evolution of CMEs as well as their space weather impacts. △ Less

Submitted 24 February, 2021; originally announced February 2021.

Comments: accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 656, A1 (2021)

On rotational flows with discontinuous vorticity beneath steady water waves near stagnation

Authors: Lin Chen, Biswajit Basu, Calin-I Martin

Abstract: We numerically investigate the flow structure of periodic steady water waves of fixed relative mass flux propagating on rotational flows with piece-wise constant vorticity. We show that for wave solutions along the global bifurcation diagram the stagnation point can first occur internally or at the bottom, and then again occurs at the crest with further increase in wave height. We observe that the… ▽ More We numerically investigate the flow structure of periodic steady water waves of fixed relative mass flux propagating on rotational flows with piece-wise constant vorticity. We show that for wave solutions along the global bifurcation diagram the stagnation point can first occur internally or at the bottom, and then again occurs at the crest with further increase in wave height. We observe that the bifurcation diagram has a new branch which is not connected to the trivial solution. Furthermore, we present an in-depth discussion of the results on pressure distributions and particle trajectories beneath large-amplitude steady waves near stagnation. We also expand on previous results concerning the amplitude and mass flux of steady water waves traveling on rotational flows with discontinuous vorticity. △ Less

Submitted 23 November, 2020; originally announced November 2020.

Comments: 23 pages, 22 figures

MSC Class: 35B10; 35B32; 35Q35

Global to local impacts on atmospheric CO2 caused by COVID-19 lockdown

Authors: Ning Zeng, Pengfei Han, Di Liu, Zhiqiang Liu, Tomohiro Oda, Cory Martin, Zhu Liu, Bo Yao, Wanqi Sun, Pucai Wang, Qixiang Cai, Russell Dickerson, Shamil Maksyutov

Abstract: The world-wide lockdown in response to the COVID-19 pandemic in year 2020 led to economic slowdown and large reduction of fossil fuel CO2 emissions, but it is unclear how much it would reduce atmospheric CO2 concentration, and whether it can be observed. We estimated that a 7.9% reduction in emissions for 4 months would result in a 0.25 ppm decrease in the Northern Hemisphere CO2, an increment tha… ▽ More The world-wide lockdown in response to the COVID-19 pandemic in year 2020 led to economic slowdown and large reduction of fossil fuel CO2 emissions, but it is unclear how much it would reduce atmospheric CO2 concentration, and whether it can be observed. We estimated that a 7.9% reduction in emissions for 4 months would result in a 0.25 ppm decrease in the Northern Hemisphere CO2, an increment that is within the capability of current CO2 analyzers, but is a few times smaller than natural CO2 variabilities caused by weather and the biosphere such as El Nino. We used a state-of-the-art atmospheric transport model to simulate CO2, driven by a new daily fossil fuel emissions dataset and hourly biospheric fluxes from a carbon cycle model forced with observed climate variability. Our results show a 0.13 ppm decrease in atmospheric column CO2 anomaly averaged over 50S-50N for the period February-April 2020 relative to a 10-year climatology. A similar decrease was observed by the carbon satellite GOSAT3. Using model sensitivity experiments, we further found that COVID, the biosphere and weather contributed 54%, 23%, and 23% respectively. This seemingly small change stands out as the largest sub-annual anomaly in the last 10 years. Measurements from global ground stations were analyzed. At city scale, on-road CO2 enhancement measured in Beijing shows reduction of 20-30 ppm, consistent with drastically reduced traffic during the lockdown. The ability of our current carbon monitoring systems in detecting the small and short-lasting COVID signal on the background of fossil fuel CO2 accumulated over the last two centuries is encouraging. The COVID-19 pandemic is an unintended experiment whose impact suggests that to keep atmospheric CO2 at a climate-safe level will require sustained effort of similar magnitude and improved accuracy and expanded spatiotemporal coverage of our monitoring systems. △ Less

Submitted 24 October, 2020; originally announced October 2020.

Capillary-Gravity Water Waves: Modified Flow Force Formulation

Authors: Biswajit Basu, Calin Iulian Martin

Abstract: The classical irrotational capillary-gravity water wave problem described by the Euler equations with a nonlinear free surface boundary condition over a flat bed is considered. A modified flow force has been defined and a new formulation of capillary-gravity waves in the framework of the modified flow force function has been developed. Using bifurcation theory, the local existence of waves of smal… ▽ More The classical irrotational capillary-gravity water wave problem described by the Euler equations with a nonlinear free surface boundary condition over a flat bed is considered. A modified flow force has been defined and a new formulation of capillary-gravity waves in the framework of the modified flow force function has been developed. Using bifurcation theory, the local existence of waves of small amplitude is proved. △ Less

Submitted 19 October, 2020; originally announced October 2020.

Journal ref: Journal of Differential Equations, 2020, 269(12), pp. 11231-11251

Explicit and exact solutions concerning the Antarctic Circumpolar Current with variable density in spherical coordinates

Authors: Calin Iulian Martin, Ronald Quirchmayr

Abstract: We use spherical coordinates to devise a new exact solution to the governing equations of geophysical fluid dynamics for an inviscid and incompressible fluid with a general density distribution and subjected to forcing terms. The latter are of paramount importance for the modeling of realistic flows-that is, flows that are observed in some averaged sense in the ocean. Owing to the employment of sp… ▽ More We use spherical coordinates to devise a new exact solution to the governing equations of geophysical fluid dynamics for an inviscid and incompressible fluid with a general density distribution and subjected to forcing terms. The latter are of paramount importance for the modeling of realistic flows-that is, flows that are observed in some averaged sense in the ocean. Owing to the employment of spherical coordinates we do not need to resort to approximations (e.g. of $f$- and $β$-plane type) that simplify the geometry in the governing equations. Our explicit solution represents a steady purely-azimuthal stratified flow with a free surface, that---thanks to the inclusion of forcing terms and the consideration of the Earth's geometry via spherical coordinates---makes it suitable for describing the Antarctic Circumpolar Current and enables an in-depth analysis of the structure of this flow. In line with the latter aspect, we employ functional analytical techniques to prove that the free surface distortion is defined in a unique and implicit way by means of the pressure applied at the free surface. We conclude our discussion by setting out relations between the monotonicity of the surface pressure and the monotonicity of the surface distortion that concur with the physical expectations. △ Less

Submitted 19 October, 2020; originally announced October 2020.

MSC Class: Primary:35Q31; 35Q35. Secondary: 35Q86

Journal ref: J. Math. Phys. 60 (2019), no. 10, 101505, 12 pp

A steady stratified purely azimuthal flow representing the Antarctic Circumpolar Current

Authors: Calin Iulian Martin, Ronald Quirchmayr

Abstract: We construct an explicit steady stratified purely azimuthal flow for the governing equations of geophysical fluid dynamics. These equations are considered in a setting that applies to the Antarctic Circumpolar Current, accounting for eddy viscosity and forcing terms. We construct an explicit steady stratified purely azimuthal flow for the governing equations of geophysical fluid dynamics. These equations are considered in a setting that applies to the Antarctic Circumpolar Current, accounting for eddy viscosity and forcing terms. △ Less

Submitted 19 October, 2020; originally announced October 2020.

Journal ref: Monatshefte für Mathematik 192 (2020), no. 2, 401-407

Enhancing surface production of negative ions using nitrogen doped diamond in a deuterium plasma

Authors: Gregory J. Smith, James Ellis, Roba Moussaoui, Cédric Pardanaud, Céline Martin, Jocelyn Achard, Riadh Issaoui, Timo Gans, James P. Dedrick, Gilles Cartry

Abstract: The production of negative ions is of significant interest for applications including mass spectrometry, particle acceleration, material surface processing, and neutral beam injection for magnetic confinement fusion. Methods to improve the efficiency of the surface production of negative ions, without the use of low work function metals, are of interest for mitigating the complex engineering chall… ▽ More The production of negative ions is of significant interest for applications including mass spectrometry, particle acceleration, material surface processing, and neutral beam injection for magnetic confinement fusion. Methods to improve the efficiency of the surface production of negative ions, without the use of low work function metals, are of interest for mitigating the complex engineering challenges these materials introduce. In this study we investigate the production of negative ions by doping diamond with nitrogen. Negatively biased ($-20$ V or $-130$ V), nitrogen doped micro-crystalline diamond films are introduced to a low pressure deuterium plasma (helicon source operated in capacitive mode, 2 Pa, 26 W) and negative ion energy distribution functions (NIEDFs) are measured via mass spectrometry with respect to the surface temperature (30$^{\circ}$C to 750$^{\circ}$C) and dopant concentration. The results suggest that nitrogen doping has little influence on the yield when the sample is biased at $-130$ V, but when a relatively small bias voltage of $-20$ V is applied the yield is increased by a factor of 2 above that of un-doped diamond when its temperature reaches 550$^{\circ}$C. The doping of diamond with nitrogen is a new method for controlling the surface production of negative ions, which continues to be of significant interest for a wide variety of practical applications. △ Less

Submitted 1 July, 2020; originally announced July 2020.

Post-mortem analysis of tungsten plasma facing components in tokamaks: Raman microscopy measurements on compact, porous oxide and nitride films and nanoparticles

Authors: Cédric Pardanaud, David Dellasega, Matteo Passoni, Céline Martin, Pascale Roubin, Younès Addab, Cécile Arnas, Lénaïc Couëdel, Marco Minissale, Eric Salomon, Gregory Giacometti, Alexandre Merlen, Elodie Bernard, Rodrigo Mateus, Eduardo Alves, Zdravko Siketic, Iva Bogdanović Radović, Antti Hakola, Eurofusion Pfc

Abstract: Raman microscopy is one of the methods that could be used for future post-mortem analyses of samples extracted from ITER plasma facing. This study shows that this technique is useful for studying tungsten-based materials containing impurities including oxides and nitrides. Here, we apply pulsed laser deposition and DC argon glow discharges to produce tungsten-containing synthetic films (compact, p… ▽ More Raman microscopy is one of the methods that could be used for future post-mortem analyses of samples extracted from ITER plasma facing. This study shows that this technique is useful for studying tungsten-based materials containing impurities including oxides and nitrides. Here, we apply pulsed laser deposition and DC argon glow discharges to produce tungsten-containing synthetic films (compact, porous) and nanoparticles and investigate the influence of their morphology on the measured Raman spectra. The amounts of oxygen and/or nitrogen in the films are also investigated. Comparative data are obtained by X-ray Photoelectrons Spectroscopy, Atomic Force Microscopy, Electron Microscopies (Scanning and Transmission), Energy Dispersive X-ray spectroscopy, Time-of-Flight Elastic Recoil Detection Analysis. The power density of the laser beam used to perform Raman microscopy is varied by up to 4 orders of magnitude (0.01-20 mW/$μ$m 2) to investigate thermal stability of films and nanoparticles. As a first result, we give evidence that Raman microscopy is sensitive enough to detect surface native oxides. Secondly, more tungsten oxides are detected in porous materials and nanoparticles than in compact films, and the intensities of the Raman band correlate to their oxygen content. Thirdly, thermal stability of these films (i.e. structural and chemical modification under laser heating) is poor when compact films contain a sufficiently large amount of nitrogen. This finding suggests that nitrogen can be substituted by oxygen during Raman laser induced heating occurring in ambient air. Finally, our methodology can be used to rapidly characterize morphology and chemistry of the samples analyzed, and also to create oxides at the micrometer scale. keywords: PLD, Raman spectroscopy, tungsten oxide, tungsten nitride, plasma wall interaction, laser heating, post-mortem analysis 2 △ Less

Submitted 19 May, 2020; originally announced May 2020.

Comments: Nuclear Fusion, IOP Publishing, 2020

Measurements of Single Event Upset in ATLAS IBL

Authors: G. Balbi, M. Barbero, R. Beccherle, M. Bindi, P. Breugnon, P. Butti, D. Cinca, J. Dickinson, D. Ferrere, D. Fougeron, M. Garcia-Sciveres, J. Garcia Pascual, A. Gaudiello, C. Gemme, N. Giangiacomi, T. Hemperek, L. Jeanty, O. Kepka, M. Kocian, K. Lantzsch, P. Liu, C. Martin, A. Mekkaoui, M. Menouni, K. Potamianos , et al. (3 additional authors not shown)

Abstract: Effects of Single Event Upsets (SEU) and Single Event Transients (SET) are studied in the FE-I4B chip of the innermost layer of the ATLAS pixel system. SEU/SET affect the FE-I4B Global Registers as well as the settings for the individual pixels, causing, among other things, occupancy losses, drops in the low voltage currents, noisy pixels, and silent pixels. Quantitative data analysis and simulati… ▽ More Effects of Single Event Upsets (SEU) and Single Event Transients (SET) are studied in the FE-I4B chip of the innermost layer of the ATLAS pixel system. SEU/SET affect the FE-I4B Global Registers as well as the settings for the individual pixels, causing, among other things, occupancy losses, drops in the low voltage currents, noisy pixels, and silent pixels. Quantitative data analysis and simulations indicate that SET dominate over SEU on the load line of the memory. Operational issues and mitigation techniques are presented. △ Less

Submitted 29 April, 2020; originally announced April 2020.

Comments: 30 pages with 32 figures