-
Quantitative Nonlinear Optical Polarimetry with High Spatial Resolution
Authors:
Albert Suceava,
Sankalpa Hazra,
Jadupati Nag,
John Hayden,
Safdar Imam,
Zhiwen Liu,
Abishek Iyer,
Mercouri Kanatzidis,
Susan Trolier-McKinstry,
Jon-Paul Maria,
Venkatraman Gopalan
Abstract:
Nonlinear optical microscopy such as in the optical second-harmonic generation (SHG) modality has become a popular tool today for probing materials in the physical and biological sciences. While imaging and spectroscopy are widely used in the microscopy mode, nonlinear polarimetry, which can shed light on materials' symmetry and microstructure, is relatively underdeveloped. This is partly because…
▽ More
Nonlinear optical microscopy such as in the optical second-harmonic generation (SHG) modality has become a popular tool today for probing materials in the physical and biological sciences. While imaging and spectroscopy are widely used in the microscopy mode, nonlinear polarimetry, which can shed light on materials' symmetry and microstructure, is relatively underdeveloped. This is partly because quantitative analytical modeling of the optical SHG response for anisotropic crystals and films largely assumes low-numerical aperture (NA) focusing of light, where the plane-wave approximation is sufficient. Tight focusing provides unique benefits in revealing out-of-plane polarization responses, which cannot be detected by near-plane-wave illumination at normal incidence. Here, we outline a method for quantitatively analyzing SHG polarimetry measurements obtained under high-NA focusing within a microscope geometry. Experiments and simulations of a variety of standard samples, from single crystals to thin films, are in good agreement, including measured and simulated spatial SHG maps of ferroelectric domains. A solution to the inverse problem is demonstrated, where the spatial distribution of an SHG tensor with unknown tensor coefficient magnitudes is determined by experimentally measured polarimetry. The ability to extract the out-of-plane component of the nonlinear polarization in normal incidence is demonstrated, which can be valuable for high-resolution polarimetry of 2D materials, thin films, heterostructures, and uniaxial crystals with a strong out-of-plane response.
Copyright 2025 Optica Publishing Group. Users may use, reuse, and build upon the article, or use the article for text or data mining, so long as such uses are for non-commercial purposes and appropriate attribution is maintained. All other rights are reserved. https://doi.org/10.1364/OPTICA.559060
△ Less
Submitted 30 July, 2025;
originally announced July 2025.
-
Material-Limited Switching in Nanoscale Ferroelectrics
Authors:
Tony Chiang,
John J. Plombon,
Megan K. Lenox,
Ian Mercer,
Punyashloka Debashis,
Mahendra DC,
Susan Trolier-McKinstry,
Jon-Paul Maria,
Jon F. Ihlefeld,
Ian A. Young,
John T. Heron
Abstract:
The ferroelectric switching speed has been experimentally obfuscated by the interaction between the measurement circuit and the ferroelectric switching itself. This has prohibited the observation of real material responses at nanosecond timescales and lower. Here, fundamental polarization switching speeds in ferroelectric materials with the perovskite, fluorite, and wurtzite structures are reporte…
▽ More
The ferroelectric switching speed has been experimentally obfuscated by the interaction between the measurement circuit and the ferroelectric switching itself. This has prohibited the observation of real material responses at nanosecond timescales and lower. Here, fundamental polarization switching speeds in ferroelectric materials with the perovskite, fluorite, and wurtzite structures are reported. Upon lateral scaling of island capacitors from micron to nanoscales, a clear transition from circuit-limited switching to a material-limited switching regime is observed. In La$_{0.15}$Bi$_{0.85}$FeO$_{3}$ capacitors, switching is as fast as ~150 ps, the fastest switching time reported. For polycrystalline Hf$_{0.5}$Zr$_{0.5}$O$_{2}$ capacitors, a fundamental switching limit of ~210 ps is observed. Switching times for Al$_{0.92}$B$_{0.08}$N are near 20 ns, limited by the coercive and breakdown electric fields. The activation field, instantaneous pseudo-resistivity, and energy-delay are reported in this material-limited regime. Lastly, a criterion for reaching the material-limited regime is provided. This regime enables observation of intrinsic material properties and favorable scaling trends for high-performance computing.
△ Less
Submitted 16 August, 2025; v1 submitted 16 July, 2025;
originally announced July 2025.
-
Exploring the Complex Landscape of Entropy Stabilized Oxides
Authors:
Bo Jiang,
De-Ye Lin,
Gerald R. Bejger,
Stephen C. Purdy,
Yuanpeng Zhang,
Xin Wang,
Jon-Paul Maria,
Christina M. Rost,
Katharine Page
Abstract:
Entropy-stabilized oxides (ESOs), driven by high configurational entropy, have gained phenomenological research interest due to their potential for tailoring structure property relationships. However, the chemical short range ordering (SRO) and its interplay with local lattice distortion (LD) remain to be explored, although they could diminish the configurational entropy and potentially impact str…
▽ More
Entropy-stabilized oxides (ESOs), driven by high configurational entropy, have gained phenomenological research interest due to their potential for tailoring structure property relationships. However, the chemical short range ordering (SRO) and its interplay with local lattice distortion (LD) remain to be explored, although they could diminish the configurational entropy and potentially impact structure property relationships. A combination of experimental and theoretical approaches are employed to investigate the SRO and LD in the prototype ESO, Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O, generally referred to as J14. We demonstrate that the efficiency and accuracy of density functional theory (DFT) relaxed special quasirandom structures (SQS) enhances the analysis of the local structure of J14, unveiling the unique local cationic environments. Importantly, this joint experimental and computational approach sheds light on the understanding of local structure and structure property relationships in J14, demonstrating the necessity for further research into other high entropy and compositionally complex materials.
△ Less
Submitted 12 August, 2025; v1 submitted 4 July, 2025;
originally announced July 2025.
-
Ferroelectric Al$_{1-x}$B$_x$N sputtered thin films on n-type Si bottom electrodes
Authors:
Ian Mercer,
Chloe Skidmore,
Sebastian Calderon,
Elizabeth Dickey,
Jon-Paul Maria
Abstract:
Ferroelectric Al$_{1-x}$B$_x$N thin films are grown on highly doped and plasma treated (100) n-type Si. We demonstrate ferroelectricity for x = <0.01, 0.02, 0.06, 0.08, 0.13, and 0.17 where the n-type Si is both the substrate and bottom electrode. Polarization hysteresis reveals remanent polarization values between 130-140 $μ$C/cm$^2$ and coercive field values as low as 4 MV/cm at 1 Hz with low le…
▽ More
Ferroelectric Al$_{1-x}$B$_x$N thin films are grown on highly doped and plasma treated (100) n-type Si. We demonstrate ferroelectricity for x = <0.01, 0.02, 0.06, 0.08, 0.13, and 0.17 where the n-type Si is both the substrate and bottom electrode. Polarization hysteresis reveals remanent polarization values between 130-140 $μ$C/cm$^2$ and coercive field values as low as 4 MV/cm at 1 Hz with low leakage. The highest re-sistivity and most saturating hysteresis occurs with B contents between x = 0.06 and 0.13. We also demonstrate the impact of substrate plasma treatment time on Al$_{1-x}$B$_x$N crystallinity and switching. Cross-sectional transmission electron microscopy and electron energy loss spectra reveal an amorphous 3.5 nm SiNx layer at the Al$_{1-x}$B$_x$N interface post-plasma treatment and deposition. The first $\sim 5$ nm of Al$_{1-x}$B$_x$N is crystallographically defective. Using the n-type Si substrate we demonstrate Al$_{1-x}$B$_x$N thick-ness scaling to 25 nm via low frequency hysteresis and CV. Serving as the bottom electrode and sub-strate, the n-type Si enables a streamlined growth process for Al$_{1-x}$B$_x$N for a wide range of Al$_{1-x}$B$_x$N compositions and layer thicknesses.
△ Less
Submitted 5 April, 2025;
originally announced April 2025.
-
Nanoscale ferroelectric programming of van der Waals heterostructures
Authors:
Dengyu Yang,
Qingrui Cao,
Erin Akyuz,
John Hayden,
Josh Nordlander,
Muqing Yu,
Ranjani Ramachandran,
Patrick Irvin,
Jon-Paul Maria,
Benjamin M. Hunt,
Jeremy Levy
Abstract:
The ability to create superlattices in van der Waals (vdW) heterostructures via moiré interference heralded a new era in the science and technology of two-dimensional materials. Through precise control of the twist angle, flat bands and strongly correlated phases have been engineered. The precise twisting of vdW layers is in some sense a bottom-up approach--a single parameter can dial in a wide ra…
▽ More
The ability to create superlattices in van der Waals (vdW) heterostructures via moiré interference heralded a new era in the science and technology of two-dimensional materials. Through precise control of the twist angle, flat bands and strongly correlated phases have been engineered. The precise twisting of vdW layers is in some sense a bottom-up approach--a single parameter can dial in a wide range of periodic structures. Here, we describe a top-down approach to engineering nanoscale potentials in vdW layers using a buried programmable ferroelectric layer. Ultra-low-voltage electron beam lithography (ULV-EBL) is used to program ferroelectric domains in a ferroelectric Al_{1-x}B_{x}N thin film through a graphene/hexagonal boron nitride (hBN) heterostructure that is transferred on top. We demonstrate ferroelectric field effects by creating a lateral p-n junction, and demonstrate spatial resolution down to 35 nm, limited by the resolution of our scanned probe characterization methods. This innovative, resist-free patterning method is predicted to achieve 10 nm resolution and enable arbitrary programming of vdW layers, opening a pathway to create new phases that are inaccessible by moiré techniques. The ability to "paint" different phases of matter on a single vdW "canvas" provides a wealth of new electronic and photonic functionalities.
△ Less
Submitted 17 July, 2024;
originally announced July 2024.
-
Ultrafast evanescent heat transfer across solid interfaces via hyperbolic phonon polaritons in hexagonal boron nitride
Authors:
William Hutchins,
John A. Tomko,
Dan M. Hirt,
Saman Zare,
Joseph R. Matson,
Katja Diaz-Granados,
Mingze He,
Thomas Pfeifer,
Jiahan Li,
James Edgar,
Jon-Paul Maria,
Joshua D. Caldwell,
Patrick E. Hopkins
Abstract:
The efficiency of phonon-mediated heat transport is limited by the intrinsic atomistic properties of materials, seemingly providing an upper limit to heat transfer in materials and across their interfaces. The typical speeds of conductive transport, which are inherently limited by the chemical bonds and atomic masses, dictate how quickly heat will move in solids. Given that phonon-polaritons, or c…
▽ More
The efficiency of phonon-mediated heat transport is limited by the intrinsic atomistic properties of materials, seemingly providing an upper limit to heat transfer in materials and across their interfaces. The typical speeds of conductive transport, which are inherently limited by the chemical bonds and atomic masses, dictate how quickly heat will move in solids. Given that phonon-polaritons, or coupled phonon-photon modes, can propagate at speeds approaching 1 percent of the speed of light - orders of magnitude faster than transport within a pure diffusive phonon conductor - we demonstrate that volume-confined, hyperbolic phonon-polariton(HPhP) modes supported by many biaxial polar crystals can couple energy across solid-solid interfaces at an order of magnitude higher rates than phonon-phonon conduction alone. Using pump-probe thermoreflectance with a mid-infrared, tunable, probe pulse with sub-picosecond resolution, we demonstrate remote and spectrally selective excitation of the HPhP modes in hexagonal boron nitride in response to radiative heating from a thermally emitting gold source. Our work demonstrates a new avenue for interfacial heat transfer based on broadband radiative coupling from a hot spot in a gold film to hBN HPhPs, independent of the broad spectral mismatch between the pump(visible) and probe(mid-IR) pulses employed. This methodology can be used to bypass the intrinsically limiting phonon-phonon conductive pathway, thus providing an alternative means of heat transfer across interfaces. Further, our time-resolved measurements of the temperature changes of the HPhP modes in hBN show that through polaritonic coupling, a material can transfer heat across and away from an interface at rates orders of magnitude faster than diffusive phonon speeds intrinsic to the material, thus demonstrating a pronounced thermal transport enhancement in hBN via phonon-polariton coupling.
△ Less
Submitted 20 February, 2024; v1 submitted 17 January, 2024;
originally announced January 2024.
-
Single-peak and narrow-band mid-infrared thermal emitters driven by mirror-coupled plasmonic quasi-BIC metasurfaces
Authors:
Sen Yang,
Mingze He,
Chuchuan Hong,
Josh Nordlander,
Jon-Paul Maria,
Joshua D. Caldwell,
Justus C. Ndukaife
Abstract:
Wavelength-selective thermal emitters (WS-EMs) hold considerable appeal due to the scarcity of cost-effective, narrow-band sources in the mid-to-long-wave infrared spectrum. WS-EMs achieved via dielectric materials typically exhibit thermal emission peaks with high quality factors (Q factors), but their optical responses are prone to temperature fluctuations. Metallic EMs, on the other hand, show…
▽ More
Wavelength-selective thermal emitters (WS-EMs) hold considerable appeal due to the scarcity of cost-effective, narrow-band sources in the mid-to-long-wave infrared spectrum. WS-EMs achieved via dielectric materials typically exhibit thermal emission peaks with high quality factors (Q factors), but their optical responses are prone to temperature fluctuations. Metallic EMs, on the other hand, show negligible drifts with temperature changes, but their Q factors usually hover around 10. In this study, we introduce and experimentally verify a novel EM grounded in plasmonic quasi-bound states in the continuum (BICs) within a mirror-coupled system. Our design numerically delivers an ultra-narrowband single peak with a Q factor of approximately 64, and near-unity absorptance that can be freely tuned within an expansive band of more than 10 μm. By introducing air slots symmetrically, the Q factor can be further augmented to around 100. Multipolar analysis and phase diagrams are presented to elucidate the operational principle. Importantly, our infrared spectral measurements affirm the remarkable resilience of our designs' resonance frequency in the face of temperature fluctuations over 300 degrees Celsius. Additionally, we develop an effective impedance model based on the optical nanoantenna theory to understand how further tuning of the emission properties is achieved through precise engineering of the slot. This research thus heralds the potential of applying plasmonic quasi-BICs in designing ultra-narrowband, temperature-stable thermal emitters in mid-infrared. Moreover, such a concept may be adaptable to other frequency ranges, such as near-infrared, Terahertz, and Gigahertz.
△ Less
Submitted 18 October, 2023;
originally announced October 2023.
-
Ablation threshold and temperature dependent thermal conductivity of high entropy carbide thin films
Authors:
Milena Milich,
Kathleen Quiambao-Tomko,
John Tomko,
Jon-Paul Maria,
Patrick Hopkins
Abstract:
High entropy carbides (HECs) are a promising new class of ultra-high temperature ceramics that could provide novel material solutions for leading edges of hypersonic vehicles, which can reach temperatures above 3500C and experience extreme thermal gradients. Although the mechanical and thermal properties of HECs have been studied extensively at room temperature, few works have examined HEC propert…
▽ More
High entropy carbides (HECs) are a promising new class of ultra-high temperature ceramics that could provide novel material solutions for leading edges of hypersonic vehicles, which can reach temperatures above 3500C and experience extreme thermal gradients. Although the mechanical and thermal properties of HECs have been studied extensively at room temperature, few works have examined HEC properties at high temperatures or considered these materials' responses to thermal shock. In this work, we measure the thermal conductivity of a five-cation HEC up to 1200C. We find that thermal conductivity increases with temperature, consistent with trends demonstrated in single-metal carbides. We also measure thermal conductivity of an HEC deposited with varying CH4 flow rate, and find that although thermal conductivity is reduced when carbon content surpasses stoichiometric concentrations, the films all exhibited the same temperature dependent trends regardless of carbon content. To compare the thermal shock resistance of HECs with a refractory carbide, we conduct pulsed laser ablation measurements to determine the fluence threshold the HECs can withstand before damaging. We find that this metric for the average bond strength trends with the theoretical hardness of the HECs as expected.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Unique Ferroelectric Fatigue Behavior and Exceptional High Temperature Retention in Al0.93B0.07N Films
Authors:
Wanlin Zhu,
Fan He,
John Hayden,
Quyen Tran,
Jung In Yang,
Pannawit Tipsawat,
Brian Foley,
Thomas N. Jackson,
Jon-Paul Maria,
Susan Trolier-McKinstry
Abstract:
This paper reports the fatigue and retention behavior for Al1-xBxN thin films, a member of the novel family of wurtzite ferroelectrics, with an emphasis on the role of capacitor architecture. By modifying the capacitor architecture, and thus thermal and electrical boundary conditions, we create insight regarding the relative importance of intrinsic and extrinsic contributors to the degradation ten…
▽ More
This paper reports the fatigue and retention behavior for Al1-xBxN thin films, a member of the novel family of wurtzite ferroelectrics, with an emphasis on the role of capacitor architecture. By modifying the capacitor architecture, and thus thermal and electrical boundary conditions, we create insight regarding the relative importance of intrinsic and extrinsic contributors to the degradation tendencies. Our experiments suggest that bipolar cycling of metal (Pt/W)/Al0.93B0.07N/W/Al2O3 film stacks first induced wake-up, then a region of constant switchable polarization. On additional cycling, the film leakage current increased, and then films underwent dielectric breakdown. For unpatterned first generation Al0.93B0.07N films with 100 nm thick Pt top electrodes survive ~104 bipolar cycles, whereas films with 1000 nm W top electrodes survive ~10^5 cycles before thermal dielectric breakdown. Sentaurus modeling was used to design an SU8 field plate which improved the performance to ~10^6 fatigue cycles. It was found that the thermal failures during fatigue were not due to surface flashover events but were associated with hard breakdown events in the dielectric. The films showed excellent retention of the stored polarization state. As expected, data retention was slightly inferior in the opposite state (OS) measurements. However, it is noted that even after 3.6x10^6 sec (1000 hr). at 200°C, the OS signal margin still exceeded 200 uC/cm2. The predicted OS retention is 82% after 10 years baking at 200oC.
△ Less
Submitted 12 August, 2022;
originally announced August 2022.
-
Gender and collaboration patterns in a temporal scientific authorship network
Authors:
Gecia Bravo-Hermsdorff,
Valkyrie Felso,
Emily Ray,
Lee M. Gunderson,
Mary E. Helander,
Joana Maria,
Yael Niv
Abstract:
One can point to a variety of historical milestones for gender equality in STEM (science, technology, engineering, and mathematics), however, practical effects are incremental and ongoing. It is important to quantify gender differences in subdomains of scientific work in order to detect potential biases and monitor progress. In this work, we study the relevance of gender in scientific collaboratio…
▽ More
One can point to a variety of historical milestones for gender equality in STEM (science, technology, engineering, and mathematics), however, practical effects are incremental and ongoing. It is important to quantify gender differences in subdomains of scientific work in order to detect potential biases and monitor progress. In this work, we study the relevance of gender in scientific collaboration patterns in the Institute for Operations Research and the Management Sciences (INFORMS), a professional society with sixteen peer-reviewed journals. Using their publication data from 1952 to 2016, we constructed a large temporal bipartite network between authors and publications, and augmented the author nodes with gender labels. We characterized differences in several basic statistics of this network over time, highlighting how they have changed with respect to relevant historical events. We find a steady increase in participation by women (e.g., fraction of authorships by women and of new women authors) starting around 1980. However, women still comprise less than 25% of the INFORMS society and an even smaller fraction of authors with many publications. Moreover, we describe a methodology for quantifying the structural role of an authorship with respect to the overall connectivity of the network, using it to measure subtle differences between authorships by women and by men. Specifically, as measures of structural importance of an authorship, we use effective resistance and contraction importance, two measures related to diffusion throughout a network. As a null model, we propose a degree-preserving temporal and geometric network model with emergent communities. Our results suggest the presence of systematic differences between the collaboration patterns of men and women that cannot be explained by only local statistics.
△ Less
Submitted 27 May, 2020;
originally announced May 2020.
-
Long-lived modulation of plasmonic absorption by ballistic thermal injection
Authors:
John A. Tomko,
Evan L. Runnerstrom,
Yi-Siang Wang,
Joshua R. Nolen,
David H. Olson,
Kyle P. Kelley,
Angela Cleri,
Josh Nordlander,
Joshua D. Caldwell,
Oleg V. Prezhdo,
Jon-Paul Maria,
Patrick E. Hopkins
Abstract:
Energy and charge transfer across metal-semiconductor interfaces are the fundamental driving forces for a broad range of applications, such as computing, energy harvesting, and photodetection. However, the exact roles and physical separation of these two phenomena remains unclear, particularly in plasmonically-excited systems or cases of strong nonequilibrium. We report on a series of ultrafast pl…
▽ More
Energy and charge transfer across metal-semiconductor interfaces are the fundamental driving forces for a broad range of applications, such as computing, energy harvesting, and photodetection. However, the exact roles and physical separation of these two phenomena remains unclear, particularly in plasmonically-excited systems or cases of strong nonequilibrium. We report on a series of ultrafast plasmonic measurements that provide a direct measure of electronic distributions, both spatially and temporally, following optical excitation of a metal-semiconductor heterostructure. For the first time, we explicitly show that in cases of strong non-equilibrium, a novel energy transduction mechanism arises at the metal/semiconductor interface. We find that hot electrons in the metal contact transfer their energy to pre-existing electrons in the semiconductor, without transfer of charge. These experimental results findings are well-supported by both rigorous multilayer optical modeling and first-principle, ab initio calculations.
△ Less
Submitted 20 May, 2020;
originally announced May 2020.
-
High-harmonic generation from an epsilon-near-zero material
Authors:
Yuanmu Yang,
Jian Lu,
Alejandro Manjavacas,
Ting S. Luk,
Hanzhe Liu,
Kyle Kelley,
Jon-Paul Maria,
Michael B. Sinclair,
Shambhu Ghimire,
Igal Brener
Abstract:
High-harmonic generation (HHG) from a compact, solid-state medium is highly desirable for applications such as coherent attosecond pulse generation and extreme ultra-violet (EUV) spectroscopy, yet the typically weak conversion of pump light to HHG can largely hinder its applications. Here, we use a material operating in its epsilon-near-zero (ENZ) region, where the real part of its permittivity va…
▽ More
High-harmonic generation (HHG) from a compact, solid-state medium is highly desirable for applications such as coherent attosecond pulse generation and extreme ultra-violet (EUV) spectroscopy, yet the typically weak conversion of pump light to HHG can largely hinder its applications. Here, we use a material operating in its epsilon-near-zero (ENZ) region, where the real part of its permittivity vanishes, to greatly boost the efficiency of the HHG process at the microscopic level. In experiments, we report high-harmonic emission up to the 9th order directly from a low-loss, solid-state ENZ medium: indium-doped cadmium oxide, with an excitation intensity at the GW cm-2 level. Furthermore, the observed HHG signal exhibits a pronounced spectral red-shift as well as linewidth broadening, resulting from the photo-induced electron heating and the consequent time-dependent resonant frequency of the ENZ film. Our results provide a novel nanophotonic platform for strong field physics, reveal new degrees of freedom for spectral and temporal control of HHG, and open up possibilities of compact solid-state attosecond light sources.
△ Less
Submitted 10 February, 2019;
originally announced February 2019.
-
Viscoelastic optical nonlocality of low-loss epsilon-near-zero nanofilms
Authors:
Domenico de Ceglia,
Michael Scalora,
Maria A. Vincenti,
Salvatore Campione,
Kyle Kelley,
Evan L. Runnerstrom,
Jon-Paul Maria,
Gordon A. Keeler,
Ting S. Luk
Abstract:
Optical nonlocalities are elusive and hardly observable in traditional plasmonic materials like noble and alkali metals. Here we report experimental observation of viscoelastic nonlocalities in the infrared optical response of doped cadmium-oxide, epsilon-near-zero nanofilms. The nonlocality is detectable thanks to the low damping rate of conduction electrons and the virtual absence of interband t…
▽ More
Optical nonlocalities are elusive and hardly observable in traditional plasmonic materials like noble and alkali metals. Here we report experimental observation of viscoelastic nonlocalities in the infrared optical response of doped cadmium-oxide, epsilon-near-zero nanofilms. The nonlocality is detectable thanks to the low damping rate of conduction electrons and the virtual absence of interband transitions at infrared wavelengths. We describe the motion of conduction electrons using a hydrodynamic model for a viscoelastic fluid, and find excellent agreement with experimental results. The electrons elasticity blue-shifts the infrared plasmonic resonance associated with the main epsilon-near-zero mode, and triggers the onset of higher-order resonances due to the excitation of electron-pressure modes above the bulk plasma frequency. We also provide evidence of the existence of nonlocal damping, i.e., viscosity, in the motion of optically-excited conduction electrons using a combination of spectroscopic ellipsometry data and predictions based on the viscoelastic hydrodynamic model.
△ Less
Submitted 18 December, 2017; v1 submitted 8 December, 2017;
originally announced December 2017.
-
Passively Q-switched Ytterbium and Chromium all-fibre laser
Authors:
Bernard Dussardier,
Jerome Maria,
Pavel Peterka
Abstract:
A chromium-doped saturable absorber fibre stabilizes an otherwise spontaneously chaotic ytterbium- doped fibre laser. This original passively Q-switched all-fibre laser produces sustained and stable trains of smooth pulses at high repetition rate.
A chromium-doped saturable absorber fibre stabilizes an otherwise spontaneously chaotic ytterbium- doped fibre laser. This original passively Q-switched all-fibre laser produces sustained and stable trains of smooth pulses at high repetition rate.
△ Less
Submitted 14 September, 2012;
originally announced September 2012.
-
Ytterbium- and chromium-doped fibre laser: from chaotic self-pulsing to passive Q-switching
Authors:
Bernard Dussardier,
Jerome Maria,
P. Peterka
Abstract:
A spontaneously chaotic, self-pulsing ytterbium-doped fibre laser is partially stabilized into the passively Q-switched mode of operation using a chromium-doped saturable absorber fibre. This original all-fibre laser produces sustained and stable trains of smooth pulses at high repetition rate.
A spontaneously chaotic, self-pulsing ytterbium-doped fibre laser is partially stabilized into the passively Q-switched mode of operation using a chromium-doped saturable absorber fibre. This original all-fibre laser produces sustained and stable trains of smooth pulses at high repetition rate.
△ Less
Submitted 29 April, 2011;
originally announced April 2011.
-
Long-period fiber grating as wavelength selective element in double-clad Yb-doped fiber-ring lasers
Authors:
P. Peterka,
Jerome Maria,
Bernard Dussardier,
R. Slavik,
P. Honzatko,
V. Kubecek
Abstract:
Selection of operating wavelength of the Yb-doped fiber-ring lasers using longperiod fiber gratings (LPFGs) is suggested. In the proposed method, customized LPFG that sustains high powers serves as a broad-band rejection filter. It modifies the net gain profile of the laser, enabling the peak gain to occur at a designed wavelength. Spectral range of oscillation between 1050-1110 nm was experimen…
▽ More
Selection of operating wavelength of the Yb-doped fiber-ring lasers using longperiod fiber gratings (LPFGs) is suggested. In the proposed method, customized LPFG that sustains high powers serves as a broad-band rejection filter. It modifies the net gain profile of the laser, enabling the peak gain to occur at a designed wavelength. Spectral range of oscillation between 1050-1110 nm was experimentally demonstrated. This range can be extended to both shorter and longer wavelengths with proper design of the LPFG and length of the Yb-doped fiber. The gratings were inscribed by CO2 laser and the grating period down to 175 ?m was achieved being, to our best knowledge, the shortest reported LPFG period using this technique.
△ Less
Submitted 19 November, 2009;
originally announced November 2009.
