-
The physics of dense suspensions
Authors:
Christopher Ness,
Ryohei Seto,
Romain Mari
Abstract:
Dense suspensions of particles are relevant to many applications and are a key platform for developing a fundamental physics of out-of-equilibrium systems. They present challenging flow properties, apparently turning from liquid to solid upon small changes in composition or, intriguingly, in the driving forces applied to them. The emergent physics close to the ubiquitous jamming transition (and to…
▽ More
Dense suspensions of particles are relevant to many applications and are a key platform for developing a fundamental physics of out-of-equilibrium systems. They present challenging flow properties, apparently turning from liquid to solid upon small changes in composition or, intriguingly, in the driving forces applied to them. The emergent physics close to the ubiquitous jamming transition (and to some extent the glass and gelation transitions) provides common principles with which to achieve a consistent interpretation of a vast set of phenomena reported in the literature. In light of this, we review the current state of understanding regarding the relation between the physics at the particle scale and the rheology at the macroscopic scale. We further show how this perspective opens new avenues for the development of continuum models for dense suspensions.
△ Less
Submitted 10 May, 2021;
originally announced May 2021.
-
Dynamic vorticity banding in discontinuously shear thickening suspensions
Authors:
Rahul N. Chacko,
Romain Mari,
Michael E. Cates,
Suzanne M. Fielding
Abstract:
It has recently been argued that steady-state vorticity bands cannot arise in shear thickening suspensions, because the normal stress imbalance across the interface between the bands will set up particle migrations. In this Letter, we develop a simple continuum model that couples shear thickening to particle migration. We show by linear stability analysis that homogeneous flow is unstable towards…
▽ More
It has recently been argued that steady-state vorticity bands cannot arise in shear thickening suspensions, because the normal stress imbalance across the interface between the bands will set up particle migrations. In this Letter, we develop a simple continuum model that couples shear thickening to particle migration. We show by linear stability analysis that homogeneous flow is unstable towards vorticity banding, as expected, in the regime of negative constitutive slope. In full nonlinear computations, we show however that the resulting vorticity bands are unsteady, with spatiotemporal patterns governed by stress-concentration coupling. We furthermore show that these dynamical bands also arise in direct particle simulations, in good agreement with the continuum model.
△ Less
Submitted 25 November, 2018; v1 submitted 28 February, 2018;
originally announced February 2018.
-
Shear Reversal in Dense Suspensions: The Challenge to Fabric Evolution Models from Simulation Data
Authors:
Rahul N. Chacko,
Romain Mari,
Suzanne M. Fielding,
Michael E. Cates
Abstract:
Despite the industrial importance of dense suspensions of hard particles, few constitutive models for them have been proposed or tested. Most of these are effectively "fabric evolution models" (FEMs) based on a stress rule connecting the bulk stress to a rank-2 microstructural fabric tensor Q and a closed time-evolution equation for Q. In dense suspensions most of the stress comes from short-range…
▽ More
Despite the industrial importance of dense suspensions of hard particles, few constitutive models for them have been proposed or tested. Most of these are effectively "fabric evolution models" (FEMs) based on a stress rule connecting the bulk stress to a rank-2 microstructural fabric tensor Q and a closed time-evolution equation for Q. In dense suspensions most of the stress comes from short-ranged pairwise steric or lubrication interactions at near-contacts, so a natural choice for Q is the deviatoric 2nd moment of the distribution P(p) of the near-contact orientations p. Here we test directly whether a closed time-evolution equation for such a Q can exist for inertialess non-Brownian hard spheres in a Newtonian solvent. We perform extensive numerical simulations for the evolution of P(p) under shear reversal, providing a stringent test for FEMs. We consider a generic class of these as defined by Hand (1962) constrained only by frame indifference. Motivated by the small microstructural anisotropy in the dense regime, we start with linear models and successively consider increasingly nonlinear ones. Based on these results we suggest that no closed FEM properly describes the dynamics of Q under reversal. We attribute this to the fact that Q gives a poor description of the microstructure during large parts of the microstructural evolution following shear reversal. Specifically, the truncation of P(p) at 2nd spherical harmonic level describes two-lobed distributions of near-contact orientations, whereas on reversal we observe distributions that are markedly four-lobed; moreover dP/dt (p) has oblique axes, not collinear with those of Q in the shear plane. This structure likely precludes any adequate closure at second-rank level. Instead, our numerical data suggest that closures involving the coupled evolution of both a fabric tensor and a fourth-rank tensor might be reasonably accurate.
△ Less
Submitted 6 July, 2017;
originally announced July 2017.
-
Collective Influence Algorithm to find influencers via optimal percolation in massively large social media
Authors:
Flaviano Morone,
Byungjoon Min,
Lin Bo,
Romain Mari,
Hernan A. Makse
Abstract:
We elaborate on a linear time implementation of the Collective Influence (CI) algorithm introduced by Morone, Makse, Nature 524, 65 (2015) to find the minimal set of influencers in a network via optimal percolation. We show that the computational complexity of CI is O(N log N) when removing nodes one-by-one, with N the number of nodes. This is made possible by using an appropriate data structure t…
▽ More
We elaborate on a linear time implementation of the Collective Influence (CI) algorithm introduced by Morone, Makse, Nature 524, 65 (2015) to find the minimal set of influencers in a network via optimal percolation. We show that the computational complexity of CI is O(N log N) when removing nodes one-by-one, with N the number of nodes. This is made possible by using an appropriate data structure to process the CI values, and by the finite radius l of the CI sphere. Furthermore, we introduce a simple extension of CI when l is infinite, the CI propagation (CI_P) algorithm, that considers the global optimization of influence via message passing in the whole network and identifies a slightly smaller fraction of influencers than CI. Remarkably, CI_P is able to reproduce the exact analytical optimal percolation threshold obtained by Bau, Wormald, Random Struct. Alg. 21, 397 (2002) for cubic random regular graphs, leaving little improvement left for random graphs. We also introduce the Collective Immunization Belief Propagation algorithm (CI_BP), a belief-propagation (BP) variant of CI based on optimal immunization, which has the same performance as CI_P. However, this small augmented performance of the order of 1-2 % in the low influencers tail comes at the expense of increasing the computational complexity from O(N log N) to O(N^2 log N), rendering both, CI_P and CI_BP, prohibitive for finding influencers in modern-day big-data. The same nonlinear running time drawback pertains to a recently introduced BP-decimation (BPD) algorithm by Mugisha, Zhou, arXiv:1603.05781. For instance, we show that for big-data social networks of typically 200 million users (eg, active Twitter users sending 500 million tweets per day), CI finds the influencers in less than 3 hours running on a single CPU, while the BP algorithms (CI_P, CI_BP and BDP) would take more than 3,000 years to accomplish the same task.
△ Less
Submitted 27 March, 2016;
originally announced March 2016.
-
Discontinuous Shear Thickening in Brownian Suspensions By Dynamic Simulation
Authors:
Romain Mari,
Ryohei Seto,
Jeffrey F. Morris,
Morton M. Denn
Abstract:
Dynamic particle-scale numerical simulations are used to show that the shear thickening observed in dense colloidal, or Brownian, suspensions is of a similar nature to that observed in non-colloidal suspensions, i.e., a stress-induced transition from a flow of lubricated near-contacting particles to a flow of a frictionally contacting network of particles. Abrupt (or discontinuous) shear thickenin…
▽ More
Dynamic particle-scale numerical simulations are used to show that the shear thickening observed in dense colloidal, or Brownian, suspensions is of a similar nature to that observed in non-colloidal suspensions, i.e., a stress-induced transition from a flow of lubricated near-contacting particles to a flow of a frictionally contacting network of particles. Abrupt (or discontinuous) shear thickening is found to be a geometric rather than hydrodynamic phenomenon; it stems from the strong sensitivity of the jamming volume fraction to the nature of contact forces between suspended particles. The thickening obtained in a colloidal suspension of purely hard frictional spheres is qualitatively similar to experimental observations. However, the agreement cannot be made quantitative with only hydrodynamics, frictional contacts and Brownian forces. Therefore the role of a short-range repulsive potential mimicking the stabilization of actual suspensions on the thickening is studied. The effects of Brownian and repulsive forces on the onset stress can be combined in an additive manner. The simulations including Brownian and stabilizing forces show excellent agreement with experimental data for the viscosity $η$ and the second normal stress difference $N_2$.
△ Less
Submitted 3 December, 2015; v1 submitted 5 August, 2015;
originally announced August 2015.
-
Non-monotonic flow curves of shear thickening suspensions
Authors:
Romain Mari,
Ryohei Seto,
Jeffrey F. Morris,
Morton M. Denn
Abstract:
The discontinuous shear thickening (DST) of dense suspensions is a remarkable phenomenon in which the viscosity can increase by several orders of magnitude at a critical shear rate. It has the appearance of a first order phase transition between two hypothetical "states" that we have recently identified as Stokes flows with lubricated or frictional contacts, respectively. Here we extend the analog…
▽ More
The discontinuous shear thickening (DST) of dense suspensions is a remarkable phenomenon in which the viscosity can increase by several orders of magnitude at a critical shear rate. It has the appearance of a first order phase transition between two hypothetical "states" that we have recently identified as Stokes flows with lubricated or frictional contacts, respectively. Here we extend the analogy further by means of novel stress-controlled simulations and show the existence of a non-monotonic steady-state flow curve analogous to a non-monotonic equation of state. While we associate DST with an S-shaped flow curve, at volume fractions above the shear jamming transition the frictional state loses flowability and the flow curve reduces to an arch, permitting the system to flow only at small stresses. Whereas a thermodynamic transition leads to phase separation in the coexistence region, we observe a uniform shear flow all along the thickening transition. A stability analysis suggests that uniform shear may be mechanically stable for the small Reynolds numbers and system sizes in a rheometer.
△ Less
Submitted 11 May, 2015; v1 submitted 15 December, 2014;
originally announced December 2014.
-
Shear thickening, frictionless and frictional rheologies in non-Brownian suspensions
Authors:
Romain Mari,
Ryohei Seto,
Jeffrey F. Morris,
Morton M. Denn
Abstract:
Particles suspended in a Newtonian fluid raise the viscosity and also generally give rise to a shear-rate dependent rheology. In particular, pronounced shear thickening may be observed at large solid volume fractions. In a recent article (R. Seto, R. Mari, J. F. Morris, and M. M. Denn., Phys. Rev. Lett., 111:218301, 2013) we have considered the minimum set of components to reproduce the experiment…
▽ More
Particles suspended in a Newtonian fluid raise the viscosity and also generally give rise to a shear-rate dependent rheology. In particular, pronounced shear thickening may be observed at large solid volume fractions. In a recent article (R. Seto, R. Mari, J. F. Morris, and M. M. Denn., Phys. Rev. Lett., 111:218301, 2013) we have considered the minimum set of components to reproduce the experimentally observed shear thickening behavior, including Discontinuous Shear Thickening (DST). We have found frictional contact forces to be essential, and were able to reproduce the experimental behavior by a simulation including this physical ingredient along with viscous lubrication. In the present article, we thoroughly investigate the effect of friction and express it in the framework of the jamming transition. The viscosity divergence at the jamming transition has been a well known phenomenon in suspension rheology, as reflected in many empirical laws for the viscosity. Friction can affect this divergence, and in particular the jamming packing fraction is reduced if particles are frictional. Within the physical description proposed here, shear thickening is a direct consequence of this effect: as the shear rate increases, friction is increasingly incorporated as more contacts form, leading to a transition from a mostly frictionless to a mostly frictional rheology. This result is significant because it shifts the emphasis from lubrication hydrodynamics and detailed microscopic interactions to geometry and steric constraints close to the jamming transition.
△ Less
Submitted 24 September, 2014; v1 submitted 26 March, 2014;
originally announced March 2014.
-
Discontinuous Shear Thickening of Frictional Hard-Sphere Suspensions
Authors:
Ryohei Seto,
Romain Mari,
Jeffrey F. Morris,
Morton M. Denn
Abstract:
Discontinuous shear thickening (DST) observed in many dense athermal suspensions has proven difficult to understand and to reproduce by numerical simulation. By introducing a numerical scheme including both relevant hydrodynamic interactions and granularlike contacts, we show that contact friction is essential for having DST. Above a critical volume fraction, we observe the existence of two states…
▽ More
Discontinuous shear thickening (DST) observed in many dense athermal suspensions has proven difficult to understand and to reproduce by numerical simulation. By introducing a numerical scheme including both relevant hydrodynamic interactions and granularlike contacts, we show that contact friction is essential for having DST. Above a critical volume fraction, we observe the existence of two states: a low viscosity, contactless (hence, frictionless) state, and a high viscosity frictional shear jammed state. These two states are separated by a critical shear stress, associated with a critical shear rate where DST occurs. The shear jammed state is reminiscent of the jamming phase of granular matter. Continuous shear thickening is seen as a lower volume fraction vestige of the jamming transition.
△ Less
Submitted 5 October, 2013; v1 submitted 25 June, 2013;
originally announced June 2013.
