Showing 1–17 of 17 results for author: Mao, N

Experimental demonstration of the clock asynchrony model in space-borne gravitational wave detection

Authors: Ming-Yang Xua, Yu-Jie Tan, Ning Ma, Ao-Ting Fang, Yi-Jun Xia, Cheng-Gang Shao

Abstract: Space-borne gravitational wave detection will open the observation window in the 0.1 mHz$-$1 Hz bandwidth, playing a crucial role in the development of cosmology and physics. Precise clock synchronization among satellites is essential for the accurate detection of gravitational wave signals. However, the independent clock counting mechanisms of each satellite pose a significant challenge. This wor… ▽ More Space-borne gravitational wave detection will open the observation window in the 0.1 mHz$-$1 Hz bandwidth, playing a crucial role in the development of cosmology and physics. Precise clock synchronization among satellites is essential for the accurate detection of gravitational wave signals. However, the independent clock counting mechanisms of each satellite pose a significant challenge. This work reports the mathematical model of clock asynchrony, which is mainly dominated by the constant term factor and the linear term factor. Moreover, it experimentally verifies the clock asynchronization technique based on a dual-phasemeter system. Through experimentation, the impacts of these two aspects of clock asynchrony were confirmed, and post-processing techniques were employed to reduce these impacts to as low as $\rm 2π\times 10^{-6} rad/Hz^{1/2}@ 3mHz$. Specifically, the constant term factor is measured by Time-delay Interferometry Ranging (TDIR), while the linear term factor can be gauged by clock transmission link. This study provides a reference for understanding the clock asynchrony mechanism and processing clock synchronization issues. Additionally, a low additional noise clock synchronization test system is introduced to support such measurements. △ Less

Submitted 2 July, 2025; originally announced July 2025.

A broadband platform to search for hidden photons

Authors: Daqing Liu, Bin Tang, Xingfang Jiang, Xianyun Liu, Ning Ma

Abstract: The optical behavior of a structure consisting of graphene sheets embedded in media was studied, and the differences between the structure and ordinary birefringent crystal, double zero-reflectance point, were identified. We showed the changes in the optical behavior of the structure due to the existence of hidden photons. When a radiation illuminates the structure, only… ▽ More The optical behavior of a structure consisting of graphene sheets embedded in media was studied, and the differences between the structure and ordinary birefringent crystal, double zero-reflectance point, were identified. We showed the changes in the optical behavior of the structure due to the existence of hidden photons. When a radiation illuminates the structure, only $ω^2/ω_p^2>1+\frac{m_X^2 c^4 χ^2}{ε_r\hbar^2ω_p^2}$ can propagate through the structure. This provides a broadband platform for detecting hidden photons, where the sensitivity increases with the mass of the hidden photon.In contrast, if the mass of hidden photon is small, one can use a method similar to the light-shining-through-thin-wall technique. The structure is a platform to actively search for hidden photons since the operating point of the structure does not have to match the mass shell of hidden photons. △ Less

Submitted 24 June, 2025; originally announced June 2025.

Comments: 8 pages, 5 figures

Nuclear Physics at BRIF

Authors: Wei Nan, Bing Guo, Jie Chen, Baoqun Cui, Wei Fu, Xianlu Jia, Chaoxin Kan, Jiayinghao Li, Yunju Li, Chengjian Lin, Yihui Liu, Nanru Ma, Zhaohua Peng, Yangping Shen, Guofang Song, Jun Su, Bing Tang, Haorui Wang, Youbao Wang, Lei Yang, Xiaofei Yang, Zhiguo Yin, Yun Zheng, Tianjue Zhang, Weiping Liu

Abstract: The Beijing Radioactive Ion-beam Facility (BRIF), which is based on Isotope Separation On-Line (ISOL) technique, consists of a 100 MeV proton cyclotron as the driving accelerator, a two-stage ISOL system for ion separation, a 13-MV tandem accelerator for post-acceleration, a superconducting linac for further boosting beam energies. It is capable of providing ISOL beams in the energy range from 60… ▽ More The Beijing Radioactive Ion-beam Facility (BRIF), which is based on Isotope Separation On-Line (ISOL) technique, consists of a 100 MeV proton cyclotron as the driving accelerator, a two-stage ISOL system for ion separation, a 13-MV tandem accelerator for post-acceleration, a superconducting linac for further boosting beam energies. It is capable of providing ISOL beams in the energy range from 60 to 300 keV, and post-accelerated beams in the energy range from 3 to 10 MeV/u for nuclei with mass numbers of A < 80 by Isotope Separation On-Line (ISOL) technique. For nuclei with A up to 170, energies are still able to reach 3 MeV/u. This facility offers opportunities to address key questions of current interest in nuclear astrophysics, nuclear structure and reactions of unstable nuclei. In this review we present a comprehensive introduction to the BRIF and the typical experimental instruments installed on it, and then summarize current experimental results on unstable Na and Rb isotopes and future plan for further development of the BRIF to improve its performance. △ Less

Submitted 27 June, 2025; v1 submitted 16 March, 2025; originally announced March 2025.

Comments: 82 pages, 77 figures

Non-perturbative cathodoluminescence microscopy of beam-sensitive materials

Authors: Malcolm Bogroff, Gabriel Cowley, Ariel Nicastro, David Levy, Yueh-Chun Wu, Nannan Mao, Tilo H. Yang, Tianyi Zhang, Jing Kong, Rama Vasudevan, Kyle P. Kelley, Benjamin J. Lawrie

Abstract: Cathodoluminescence microscopy is now a well-established and powerful tool for probing the photonic properties of nanoscale materials, but in many cases, nanophotonic materials are easily damaged by the electron-beam doses necessary to achieve reasonable cathodoluminescence signal-to-noise ratios. Two-dimensional materials have proven particularly susceptible to beam-induced modifications, yieldin… ▽ More Cathodoluminescence microscopy is now a well-established and powerful tool for probing the photonic properties of nanoscale materials, but in many cases, nanophotonic materials are easily damaged by the electron-beam doses necessary to achieve reasonable cathodoluminescence signal-to-noise ratios. Two-dimensional materials have proven particularly susceptible to beam-induced modifications, yielding both obstacles to high spatial-resolution measurement and opportunities for beam-induced patterning of quantum photonic systems. Here pan-sharpening techniques are applied to cathodoluminescence microscopy in order to address these challenges and experimentally demonstrate the promise of pan-sharpening for minimally-perturbative high-spatial-resolution spectrum imaging of beam-sensitive materials. △ Less

Submitted 15 December, 2024; originally announced December 2024.

Chained computerized adaptive testing for the Force Concept Inventory

Authors: Jun-ichiro Yasuda, Michael M. Hull, Naohiro Mae, Kentaro Kojima

Abstract: Although conceptual assessment tests are frequently administered in a pre/post-semester fashion, there are inherent issues with this paradigm. Specifically, education researchers and instructors have limited ability to observe the progression of student conceptual understanding throughout the course. Furthermore, instructors are limited in the usefulness of the feedback they can give to the studen… ▽ More Although conceptual assessment tests are frequently administered in a pre/post-semester fashion, there are inherent issues with this paradigm. Specifically, education researchers and instructors have limited ability to observe the progression of student conceptual understanding throughout the course. Furthermore, instructors are limited in the usefulness of the feedback they can give to the students involved. To address these issues, we propose the use of computerized adaptive testing (CAT) and increasing the frequency of CAT-based assessments during the course, while reducing the test length per administration, thus keeping or decreasing the total number of test items administered throughout the course. The feasibility of this idea depends on how far the test length per administration can be reduced without compromising the test accuracy and precision. Specifically, the overall test length is desired to be shorter than when the full assessment is administered as a pretest and subsequent post-test. To achieve this goal, we developed a CAT algorithm that we call Chain-CAT. This algorithm sequentially links the results of each CAT administration using collateral information. We developed the Chain-CAT algorithm using the items of the Force Concept Inventory (FCI) and analyzed the efficiency by numerical simulations. We found that collateral information significantly improved the test efficiency, and the overall test length could be shorter than the pre-post method. Without constraints for item balancing and exposure control, simulation results indicated that the efficiency of Chain-CAT is comparable to that of the pre-post method even if the length of each CAT administration is only 5 items and the CAT is administered 9 times throughout the semester. (To continue, see text.) △ Less

Submitted 24 October, 2024; originally announced October 2024.

Temporally distributed parent body accretion in the C reservoir of the solar system

Authors: Wladimir Neumann, Ning Ma, Audrey Bouvier, Mario Trieloff

Abstract: Accretion processes in protoplanetary disks produce a diversity of small bodies that played a crucial role in multiple reshuffling events throughout the solar system and in both early and late accretion of planets. Application of thermo-chronometers to meteorites provides precise dating of the formation age of mineralogical components. Nucleosynthetic anomalies indicating a dichotomy between NC an… ▽ More Accretion processes in protoplanetary disks produce a diversity of small bodies that played a crucial role in multiple reshuffling events throughout the solar system and in both early and late accretion of planets. Application of thermo-chronometers to meteorites provides precise dating of the formation age of mineralogical components. Nucleosynthetic anomalies indicating a dichotomy between NC and C meteorites and precise parent body (PB) chronology can be combined with thermal evolution models to constrain the timescale of accretion and dynamical processes in the early solar system. Achondrite PBs are considered to have accreted early and mostly in the NC region, while late accretion in the C region produced mostly undifferentiated PBs, such as the CR chondrite PB that formed as late as 4 Ma after CAIs. However, presence of more evolved CR-related meteorites suggests also an earlier accretion timing. We present modeling evidence for a temporally distributed accretion of parent bodies of CR-related meteorite groups that originate from a C reservoir and range from aqueously altered chondrites to partially differentiated primitive achondrites. The PB formation times derived range from <1 Ma to ~4 Ma after solar system formation, with ~3.7 Ma, ~1.5-2.75 Ma, <~0.6 Ma, and <~0.7 Ma for CR, Flensburg, NWA 6704, and NWA 011. This implies that accretion processes in the C reservoir started as early as in the NC reservoir and produced differentiated PBs with carbonaceous compositions in addition to undifferentiated C chondritic PBs. The accretion times correlate inversely with the degree of the meteorites' alteration, metamorphism, or differentiation. Accretion times for CI/CM, Ryugu, and Tafassites PBs of ~3.75 Ma, ~1-3 Ma, and 1.1 Ma, respectively, fit well into this correlation in agreement with the thermal and alteration conditions suggested by the meteorites. △ Less

Submitted 26 February, 2023; originally announced February 2023.

21st Century Global and Regional Surface Temperature Projections

Authors: Nicole Ma, Jonathan H. Jiang, Kennard Hou, Yun Lin, Trung Vu, Philip E. Rosen, Yu Gu, Kristen A. Fahy

Abstract: Many regions across the globe broke their surface temperature records in recent years, further sparking concerns about the impending arrival of "tipping points" later in the 21st century. This study analyzes observed global surface temperature trends in three target latitudinal regions: the Arctic Circle, the Tropics, and the Antarctic Circle. We show that global warming is accelerating unevenly a… ▽ More Many regions across the globe broke their surface temperature records in recent years, further sparking concerns about the impending arrival of "tipping points" later in the 21st century. This study analyzes observed global surface temperature trends in three target latitudinal regions: the Arctic Circle, the Tropics, and the Antarctic Circle. We show that global warming is accelerating unevenly across the planet, with the Arctic warming at approximately three times the average rate of our world. We further analyzed the reliability of latitude-dependent surface temperature simulations from a suite of Coupled Model Intercomparison Project Phase 6 models and their multi-model mean. We found that GISS-E2-1-G and FGOALS-g3 were the best-performing models based on their statistical abilities to reproduce observational, latitude-dependent data. Surface temperatures were projected from ensemble simulations of the Shared Socioeconomic Pathway 2-4.5 (SSP2-4.5). We estimate when the climate will warm by 1.5, 2.0, and 2.5 degrees C relative to the preindustrial period, globally and regionally. GISS-E2-1-G projects that global surface temperature anomalies would reach 1.5, 2.0, and 2.5 degrees C in 2024 (+/-1.34), 2039 (+/-2.83), and 2057 (+/-5.03) respectively, while FGOALS-g3 predicts these "tipping points" would arrive in 2024 (+/-2.50), 2054 (+/-7.90), and 2087 (+/-10.55) respectively. Our results reaffirm a dramatic, upward trend in projected climate warming acceleration, with upward concavity in 21st century projections of the Arctic, which could lead to catastrophic consequences across the Earth. Further studies are necessary to determine the most efficient solutions to reduce global warming acceleration and maintain a low SSP, both globally and regionally. △ Less

Submitted 20 November, 2022; v1 submitted 6 October, 2022; originally announced October 2022.

Journal ref: Earth and Space Science, 9, 2022

Orbital shift-induced boundary obstructed topological materials with a large energy gap

Authors: Ning Mao, Runhan Li, Ying Dai, Baibiao Huang, Binghai Yan, Chengwang Niu

Abstract: We propose boundary obstructed topological phases caused by Wannier orbital shift between ordinary atomic sites, which, however, cannot be indicated by symmetry eigenvalues at high symmetry momenta (symmetry indicators) in bulk. On the open boundary, Wannier charge centers can shift to different atoms from those in bulk, leading to in-gap surface states, higher-order hinge states or corner states.… ▽ More We propose boundary obstructed topological phases caused by Wannier orbital shift between ordinary atomic sites, which, however, cannot be indicated by symmetry eigenvalues at high symmetry momenta (symmetry indicators) in bulk. On the open boundary, Wannier charge centers can shift to different atoms from those in bulk, leading to in-gap surface states, higher-order hinge states or corner states. To demonstrate such orbital-shift-induced boundary obstructed topological insulators, we predict eight material candidates, all of which were overlooked in present topological databases. Metallic surface states, hinge states, or corner states cover the large bulk energy gap (for example, more than 1 eV in TlGaTe$_2$) at related boundary, which are ready for experimental detection. Additionally, we find these materials are also fragile topological insulators with hourglass like surface states. △ Less

Submitted 6 July, 2022; originally announced July 2022.

Full-color complex-amplitude vectorial holograms based on multi-freedom metasurfaces

Authors: Zi-Lan Deng, Mingke Jin, Xuan Ye, Shuai Wang, Tan Shi, Junhong Deng, Ningbin Mao, Yaoyu Cao, Bai-Ou Guan, Andrea Alù, Guixin Li, Xiangping Li

Abstract: Phase, polarization, amplitude and frequency represent the basic dimensions of light, playing crucial roles for both fundamental light-mater interactions and all major optical applications. Metasurface emerges as a compact platform to manipulate these knobs, but previous metasurfaces have limited flexibility to simultaneous control them. Here, we introduce a multi-freedom metasurface that can simu… ▽ More Phase, polarization, amplitude and frequency represent the basic dimensions of light, playing crucial roles for both fundamental light-mater interactions and all major optical applications. Metasurface emerges as a compact platform to manipulate these knobs, but previous metasurfaces have limited flexibility to simultaneous control them. Here, we introduce a multi-freedom metasurface that can simultaneously and independently modulate phase, polarization and amplitude in an analytical form, and further realize frequency multiplexing by a k-space engineering technique. The multi-freedom metasurface seamlessly combine geometric Pancharatnam-Berry phase and detour phase, both of which are frequency-independent. As a result, it allows complex-amplitude vectorial hologram at various frequencies based on the same design strategy, without sophisticated nanostructure searching of massive size parameters. Based on this principle, we experimentally demonstrate full-color complex-amplitude vectorial meta-holograms in the visible with a metal-insulator metal architecture, unlocking the long-sought full potential of advanced light field manipulation through ultrathin metasurfaces. △ Less

Submitted 23 December, 2019; originally announced December 2019.

Journal ref: Advanced Functional Materials, 1910610, (2020)

Deep-Learning-Enabled Fast Optical Identification and Characterization of Two-Dimensional Materials

Authors: Bingnan Han, Yuxuan Lin, Yafang Yang, Nannan Mao, Wenyue Li, Haozhe Wang, Kenji Yasuda, Xirui Wang, Valla Fatemi, Lin Zhou, Joel I-Jan Wang, Qiong Ma, Yuan Cao, Daniel Rodan-Legrain, Ya-Qing Bie, Efrén Navarro-Moratalla, Dahlia Klein, David MacNeill, Sanfeng Wu, Hikari Kitadai, Xi Ling, Pablo Jarillo-Herrero, Jing Kong, Jihao Yin, Tomás Palacios

Abstract: Advanced microscopy and/or spectroscopy tools play indispensable role in nanoscience and nanotechnology research, as it provides rich information about the growth mechanism, chemical compositions, crystallography, and other important physical and chemical properties. However, the interpretation of imaging data heavily relies on the "intuition" of experienced researchers. As a result, many of the d… ▽ More Advanced microscopy and/or spectroscopy tools play indispensable role in nanoscience and nanotechnology research, as it provides rich information about the growth mechanism, chemical compositions, crystallography, and other important physical and chemical properties. However, the interpretation of imaging data heavily relies on the "intuition" of experienced researchers. As a result, many of the deep graphical features obtained through these tools are often unused because of difficulties in processing the data and finding the correlations. Such challenges can be well addressed by deep learning. In this work, we use the optical characterization of two-dimensional (2D) materials as a case study, and demonstrate a neural-network-based algorithm for the material and thickness identification of exfoliated 2D materials with high prediction accuracy and real-time processing capability. Further analysis shows that the trained network can extract deep graphical features such as contrast, color, edges, shapes, segment sizes and their distributions, based on which we develop an ensemble approach topredict the most relevant physical properties of 2D materials. Finally, a transfer learning technique is applied to adapt the pretrained network to other applications such as identifying layer numbers of a new 2D material, or materials produced by a different synthetic approach. Our artificial-intelligence-based material characterization approach is a powerful tool that would speed up the preparation, initial characterization of 2D materials and other nanomaterials and potentially accelerate new material discoveries. △ Less

Submitted 27 January, 2020; v1 submitted 26 June, 2019; originally announced June 2019.

New Concept for Electron Beam-Dump Experiment Utilizing Directional WIMP Detector

Authors: D. P. Snowden-Ifft, J. L. Harton, N. Ma, F. G. Schuckman II

Abstract: Light dark matter in the context of dark sector theories is an attractive candidate for the dark matter thought to make up the bulk of the mass of our universe. We explore here the possibility of using a low-pressure, negative-ion, time projection chamber detector to search for light dark matter behind the beam dump of an electron accelerator. The sensitivity of a 10 m long detector is several ord… ▽ More Light dark matter in the context of dark sector theories is an attractive candidate for the dark matter thought to make up the bulk of the mass of our universe. We explore here the possibility of using a low-pressure, negative-ion, time projection chamber detector to search for light dark matter behind the beam dump of an electron accelerator. The sensitivity of a 10 m long detector is several orders of magnitude better than existing limits. This sensitivity includes regions of parameter space where light dark matter is predicted to have a required relic density consistent with measured dark matter density. Backgrounds at shallow depth will need to be considered carefully. However, several signatures exist, including a powerful directional signature, which will allow a detection even in the presence of backgrounds. △ Less

Submitted 6 January, 2019; v1 submitted 18 September, 2018; originally announced September 2018.

Comments: 13 pages, 7 figures

Journal ref: Phys. Rev. D 99, 061301 (2019)

Luminosity measurements for the R scan experiment at BESIII

Authors: M. Ablikim, M. N. Achasov, S. Ahmed, X. C. Ai, O. Albayrak, M. Albrecht, D. J. Ambrose, A. Amoroso, F. F. An, Q. An, J. Z. Bai, O. Bakina, R. Baldini Ferroli, Y. Ban, D. W. Bennett, J. V. Bennett, N. Berger, M. Bertani, D. Bettoni, J. M. Bian, F. Bianchi, E. Boger, I. Boyko, R. A. Briere, H. Cai , et al. (405 additional authors not shown)

Abstract: By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measur… ▽ More By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Beijing Spectrometer (BESIII) at the Beijing Electron-Positron Collider (BEPCII), the integrated luminosities have been measured at the different c.m. energies, individually. The results are the important inputs for R value and $J/ψ$ resonance parameter measurements. △ Less

Submitted 11 February, 2017; originally announced February 2017.

Updated Core Libraries of the ALPS Project

Authors: A. Gaenko, A. E. Antipov, G. Carcassi, T. Chen, X. Chen, Q. Dong, L. Gamper, J. Gukelberger, R. Igarashi, S. Iskakov, M. Könz, J. P. F. LeBlanc, R. Levy, P. N. Ma, J. E. Paki, H. Shinaoka, S. Todo, M. Troyer, E. Gull

Abstract: The open source ALPS (Algorithms and Libraries for Physics Simulations) project provides a collection of physics libraries and applications, with a focus on simulations of lattice models and strongly correlated systems. The libraries provide a convenient set of well-documented and reusable components for developing condensed matter physics simulation code, and the applications strive to make commo… ▽ More The open source ALPS (Algorithms and Libraries for Physics Simulations) project provides a collection of physics libraries and applications, with a focus on simulations of lattice models and strongly correlated systems. The libraries provide a convenient set of well-documented and reusable components for developing condensed matter physics simulation code, and the applications strive to make commonly used and proven computational algorithms available to a non-expert community. In this paper we present an updated and refactored version of the core ALPS libraries geared at the computational physics software development community, rewritten with focus on documentation, ease of installation, and software maintainability. △ Less

Submitted 15 December, 2016; v1 submitted 13 September, 2016; originally announced September 2016.

Comments: 26 pages, 2 figures, 15 code listings

Journal ref: Comput. Phys. Comm. 213 (2017) 235-251

Fidelity susceptibility made simple: A unified quantum Monte Carlo approach

Authors: Lei Wang, Ye-Hua Liu, Jakub Imriška, Ping Nang Ma, Matthias Troyer

Abstract: The fidelity susceptibility is a general purpose probe of phase transitions. With its origin in quantum information and in the differential geometry perspective of quantum states, the fidelity susceptibility can indicate the presence of a phase transition without prior knowledge of the local order parameter, as well as reveal the universal properties of a critical point. The wide applicability of… ▽ More The fidelity susceptibility is a general purpose probe of phase transitions. With its origin in quantum information and in the differential geometry perspective of quantum states, the fidelity susceptibility can indicate the presence of a phase transition without prior knowledge of the local order parameter, as well as reveal the universal properties of a critical point. The wide applicability of the fidelity susceptibility to quantum many-body systems is, however, hindered by the limited computational tools to evaluate it. We present a generic, efficient, and elegant approach to compute the fidelity susceptibility of correlated fermions, bosons, and quantum spin systems in a broad range of quantum Monte Carlo methods. It can be applied both to the ground-state and non-zero temperature cases. The Monte Carlo estimator has a simple yet universal form, which can be efficiently evaluated in simulations. We demonstrate the power of this approach with applications to the Bose-Hubbard model, the spin-$1/2$ XXZ model, and use it to examine the hypothetical intermediate spin-liquid phase in the Hubbard model on the honeycomb lattice. △ Less

Submitted 10 March, 2015; v1 submitted 24 February, 2015; originally announced February 2015.

Comments: new physical insight added in Sec. VI., improved data in Fig. 6

Journal ref: Phys. Rev. X 5, 031007 (2015)

Development of large-area quadrant silicon detector for charged particles

Authors: Pengfei Bao, Chengjian Lin, Feng Yang, Zhaoqiao Guo, Tianshu Guo, Lei Yang, Lijie Sun, Huiming Jia, Xinxing Xu, Nanru Ma, Huanqiao Zhang, Zuhua Liu

Abstract: The quadrant silicon detector, a kind of passivated implanted planar silicon detector with quadrant structure on the junction side, gained its wide application in charged particle detection. In this paper, the manufacturing procedure, performance test and results of the quadrant silicon detector developed recently at the China Institute of Atomic Energy are presented. The detector is about 300… ▽ More The quadrant silicon detector, a kind of passivated implanted planar silicon detector with quadrant structure on the junction side, gained its wide application in charged particle detection. In this paper, the manufacturing procedure, performance test and results of the quadrant silicon detector developed recently at the China Institute of Atomic Energy are presented. The detector is about 300 $μ$m thick with a 48$\times$48 mm$^{2}$ active area. The leakage current under full depletion bias voltage of -16 V is about 2.5 nA, and the raising time is better than 160 ns. The energy resolution for 5.157 MeV $α$-particle is around the level of $1\%$. Charge sharing effects between the neighboring quads, leading to complicated correlations between two quads, were observed when $α$ particles illuminated on the junction side. It is explained as a result of distortion of electric field of inter-quad region. Such events is only about $0.6\%$ of all events and can be neglected in an actual application. △ Less

Submitted 27 January, 2014; originally announced January 2014.

The ALPS project release 2.0: Open source software for strongly correlated systems

Authors: B. Bauer, L. D. Carr, H. G. Evertz, A. Feiguin, J. Freire, S. Fuchs, L. Gamper, J. Gukelberger, E. Gull, S. Guertler, A. Hehn, R. Igarashi, S. V. Isakov, D. Koop, P. N. Ma, P. Mates, H. Matsuo, O. Parcollet, G. Pawlowski, J. D. Picon, L. Pollet, E. Santos, V. W. Scarola, U. Schollwöck, C. Silva , et al. (7 additional authors not shown)

Abstract: We present release 2.0 of the ALPS (Algorithms and Libraries for Physics Simulations) project, an open source software project to develop libraries and application programs for the simulation of strongly correlated quantum lattice models such as quantum magnets, lattice bosons, and strongly correlated fermion systems. The code development is centered on common XML and HDF5 data formats, libraries… ▽ More We present release 2.0 of the ALPS (Algorithms and Libraries for Physics Simulations) project, an open source software project to develop libraries and application programs for the simulation of strongly correlated quantum lattice models such as quantum magnets, lattice bosons, and strongly correlated fermion systems. The code development is centered on common XML and HDF5 data formats, libraries to simplify and speed up code development, common evaluation and plotting tools, and simulation programs. The programs enable non-experts to start carrying out serial or parallel numerical simulations by providing basic implementations of the important algorithms for quantum lattice models: classical and quantum Monte Carlo (QMC) using non-local updates, extended ensemble simulations, exact and full diagonalization (ED), the density matrix renormalization group (DMRG) both in a static version and a dynamic time-evolving block decimation (TEBD) code, and quantum Monte Carlo solvers for dynamical mean field theory (DMFT). The ALPS libraries provide a powerful framework for programers to develop their own applications, which, for instance, greatly simplify the steps of porting a serial code onto a parallel, distributed memory machine. Major changes in release 2.0 include the use of HDF5 for binary data, evaluation tools in Python, support for the Windows operating system, the use of CMake as build system and binary installation packages for Mac OS X and Windows, and integration with the VisTrails workflow provenance tool. The software is available from our web server at http://alps.comp-phys.org/. △ Less

Submitted 23 May, 2011; v1 submitted 13 January, 2011; originally announced January 2011.

Comments: 18 pages + 4 appendices, 7 figures, 12 code examples, 2 tables

Journal ref: J. Stat. Mech. (2011) P05001

Effective attraction between like-charged colloids in a 2D plasma

Authors: Ning Ma, S. M. Girvin, R. Rajaraman

Abstract: The existence of attractions between like-charged colloids immersed in ionic solution have been discovered in recent experiments. This phenomenon contradicts the predictions of DLVO theory and indicates a failure of mean field theory. We study a toy model based on a two dimensional one-component plasma, which is exactly soluble at one particular coupling constant. We show that colloidal interact… ▽ More The existence of attractions between like-charged colloids immersed in ionic solution have been discovered in recent experiments. This phenomenon contradicts the predictions of DLVO theory and indicates a failure of mean field theory. We study a toy model based on a two dimensional one-component plasma, which is exactly soluble at one particular coupling constant. We show that colloidal interaction results from a competition between ion-ion repulsion and longer ranged ion-void attraction. △ Less

Submitted 14 August, 2000; originally announced August 2000.

Comments: 14 pages, 14 figures, submit to PRE