-
Investigating the convergence properties of iterative ptychography for atomic-resolution low-dose imaging
Authors:
Tamazouzt Chennit,
Songge Li,
Hoelen L. Lalandec Robert,
Christoph Hofer,
Nadine J. Schrenker,
Liberato Manna,
Sara Bals,
Timothy J. Pennycook,
Jo Verbeeck
Abstract:
This study investigates the convergence properties of a collection of iterative electron ptychography methods, under low electron doses ($<$ 10$^3$ $e^-/A^2$) and gives particular attention to the impact of the user-defined update strengths. We demonstrate that carefully chosen values for this parameter, ideally smaller than those conventionally met in the literature, are essential for achieving a…
▽ More
This study investigates the convergence properties of a collection of iterative electron ptychography methods, under low electron doses ($<$ 10$^3$ $e^-/A^2$) and gives particular attention to the impact of the user-defined update strengths. We demonstrate that carefully chosen values for this parameter, ideally smaller than those conventionally met in the literature, are essential for achieving accurate reconstructions of the projected electrostatic potential. Using a 4D dataset of a thin hybrid organic-inorganic formamidinium lead bromide (FAPbBr$_{3}$) sample, we show that convergence is in practice achievable only when the update strengths for both the object and probe are relatively small compared to what is found in literature. Additionally we demonstrate that under low electron doses, the reconstructions initial error increases when the update strength coefficients are reduced below a certain threshold emphasizing the existence of critical values beyond which the algorithms are trapped in local minima. These findings highlight the need for carefully optimized reconstruction parameters in iterative ptychography, especially when working with low electron doses, ensuring both effective convergence and correctness of the result.
△ Less
Submitted 9 July, 2025;
originally announced July 2025.
-
Ultrafast Superradiant Scintillation from Weakly Confined CsPbBr3 Nanocrystals
Authors:
Matteo L. Zaffalon,
Andrea Fratelli,
Zhanzhao Li,
Francesco Bruni,
Ihor Cherniukh,
Francesco Carulli,
Francesco Meinardi,
Maksym V. Kovalenko,
Liberato Manna,
Sergio Brovelli
Abstract:
Efficiency and emission rate are two traditionally conflicting parameters in radiation detection, and achieving their simultaneous maximization could significantly advance ultrafast time-of-flight (ToF) technologies. In this study, we demonstrate that this goal is attainable by harnessing the giant oscillator strength (GOS) inherent to weakly confined perovskite nanocrystals, which enables superra…
▽ More
Efficiency and emission rate are two traditionally conflicting parameters in radiation detection, and achieving their simultaneous maximization could significantly advance ultrafast time-of-flight (ToF) technologies. In this study, we demonstrate that this goal is attainable by harnessing the giant oscillator strength (GOS) inherent to weakly confined perovskite nanocrystals, which enables superradiant scintillation under mildly cryogenic conditions that align seamlessly with ToF technologies. We show that the radiative acceleration due to GOS encompasses both single and multiple exciton dynamics arising from ionizing interactions, further enhanced by suppressed non-radiative losses and Auger recombination at 80 K. The outcome is ultrafast scintillation with 420 ps lifetime and light yield of ~10'000 photons/MeV for diluted NC solutions, all without non-radiative losses. Temperature-dependent light-guiding experiments on test-bed nanocomposite scintillators finally indicate that the light-transport capability remains unaffected by the accumulation of band-edge oscillator strength due to GOS. These findings suggest a promising pathway toward developing ultrafast nanotech scintillators with optimized light output and timing performance.
△ Less
Submitted 7 December, 2024; v1 submitted 3 December, 2024;
originally announced December 2024.
-
Size-dependent multiexciton dynamics governs scintillation from perovskite quantum dots
Authors:
Andrea Fratelli,
Matteo L. Zaffalon,
Emanuele Mazzola,
Dmitry Dirin,
Ihor Cherniukh,
Clara Otero Martinez,
Matteo Salomoni,
Francesco Carulli,
Francesco Meinardi,
Luca Gironi,
Liberato Manna,
Maksym V. Kovalenko,
Sergio Brovelli
Abstract:
The recent emergence of quantum confined nanomaterials in the field of radiation detection, in particular lead halide perovskite nanocrystals, offers potentially revolutionary scalability and performance advantages over conventional materials. This development raises fundamental questions about the mechanism of scintillation itself at the nanoscale and the role of particle size, arguably the most…
▽ More
The recent emergence of quantum confined nanomaterials in the field of radiation detection, in particular lead halide perovskite nanocrystals, offers potentially revolutionary scalability and performance advantages over conventional materials. This development raises fundamental questions about the mechanism of scintillation itself at the nanoscale and the role of particle size, arguably the most defining parameter of quantum dots. Understanding this is crucial for the design and optimisation of future nanotechnology scintillators. In this work, we address these open questions by theoretically and experimentally studying the size-dependent scintillation of CsPbBr3 nanocrystals using a combination of Monte Carlo simulations, spectroscopic, and radiometric techniques. The results reveal and unravel a complex parametric space where the fine balance between the simultaneous effects of size-dependent energy deposition, (multi-)exciton population, and light emission under ionizing excitation, typical of confined particles, combine to maximize the scintillation efficiency and time performance of larger nanocrystals due to greater stopping power and reduced Auger decay. The remarkable agreement between theory and experiment produces a fully validated descriptive model that unprecedentedly predicts the scintillation yield and kinetics of nanocrystals without free parameters, providing the first fundamental guide for the rational design of nanoscale scintillators.
△ Less
Submitted 25 September, 2024;
originally announced September 2024.
-
Ultrasmall CsPbBr3 Blue Emissive Perovskite Quantum Dots using K-alloyed Cs4PbBr6 Nanocrystals as Precursors
Authors:
Clara Otero Martinez,
Matteo L. Zaffalon,
Yurii Ivanov,
Nikolaos Livakas,
Luca Goldoni,
Giorgio Divitini,
Sankalpa Bora,
Gabriele Saleh,
Francesco Meinardi,
Andrea Fratelli,
Sudip Chakraborty,
Lakshminarayana Polavarapu,
Sergio Brovelli,
Liberato Manna
Abstract:
We report a colloidal synthesis of blue emissive, stable cube-shaped CsPbBr3 quantum dots (QDs) in the strong quantum confinement regime via a dissolution-recrystallization starting from pre-synthesized (KxCs1-x)4PbBr6 nanocrystals which are then reacted with PbBr2. This is markedly different from the known case of Cs4PbBr6 nanocrystals that react within seconds with PbBr2 and get transformed into…
▽ More
We report a colloidal synthesis of blue emissive, stable cube-shaped CsPbBr3 quantum dots (QDs) in the strong quantum confinement regime via a dissolution-recrystallization starting from pre-synthesized (KxCs1-x)4PbBr6 nanocrystals which are then reacted with PbBr2. This is markedly different from the known case of Cs4PbBr6 nanocrystals that react within seconds with PbBr2 and get transformed into much larger, green emitting CsPbBr3 nanocrystals. Here, instead, the conversion of (KxCs1-x)4PbBr6 nanocrystals to CsPbBr3 QDs occurs in a time span of hours, and tuning of the QDs size is achieved by adjusting the concentration of precursors. The QDs exhibit excitonic features in optical absorption that are tunable in the 420 - 452 nm range, accompanied by blue photoluminescence with quantum yield around 60%. Detailed spectroscopic investigations in both the single and multi-exciton regime reveal the exciton fine structure and the effect of Auger recombination of these CsPbBr3 QDs, confirming theoretical predictions for this system.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
Exciton-photocarrier interference in mixed lead-halide-perovskite nanocrystals
Authors:
Esteban Rojas-Gatjens,
Quinten A. Akkerman,
Liberato Manna,
Ajay Ram Srimath Kandada,
Carlos Silva-Acuña
Abstract:
The use of semiconductor nanocrystals in scalable quantum technologies requires characterization of the exciton coherence dynamics in an \emph{ensemble} of electronically isolated crystals in which system-bath interactions are nevertheless strong. In this communication, we identify signatures of Fano-like interference between excitons and photocarriers in the coherent two-dimensional photoluminesc…
▽ More
The use of semiconductor nanocrystals in scalable quantum technologies requires characterization of the exciton coherence dynamics in an \emph{ensemble} of electronically isolated crystals in which system-bath interactions are nevertheless strong. In this communication, we identify signatures of Fano-like interference between excitons and photocarriers in the coherent two-dimensional photoluminescence excitation spectral lineshapes of mixed lead-halide perovskite nanocrystals in dilute solution. Specifically, by tuning the femtosecond-pulse spectrum, we show such interference in an intermediate coupling regime, which is evident in the coherent lineshape when simultaneously exciting the exciton and the free-carrier band at higher energy. We conclude that this interference is an intrinsic effect that will be consequential in the quantum dynamics of the system and will thus dictate decoherence dynamics, with consequences in their application in quantum technologies.
△ Less
Submitted 6 May, 2024; v1 submitted 18 February, 2024;
originally announced February 2024.
-
The fate of optical excitons in FAPbI3 nanocube superlattices
Authors:
Alessandra Milloch,
Umberto Filippi,
Paolo Franceschini,
Selene Mor,
Stefania Pagliara,
Gabriele Ferrini,
Franco V. A. Camargo,
Giulio Cerullo,
Dmitry Baranov,
Liberato Manna,
Claudio Giannetti
Abstract:
Understanding the nature of the photoexcitation and ultrafast charge dynamics pathways in organic halide perovskite nanocubes and their aggregation into superlattices is key for the potential applications as tunable light emitters, photon harvesting materials and light-amplification systems. In this work, we apply two-dimensional coherent electronic spectroscopy (2DES) to track in real time the fo…
▽ More
Understanding the nature of the photoexcitation and ultrafast charge dynamics pathways in organic halide perovskite nanocubes and their aggregation into superlattices is key for the potential applications as tunable light emitters, photon harvesting materials and light-amplification systems. In this work, we apply two-dimensional coherent electronic spectroscopy (2DES) to track in real time the formation of near-infrared optical excitons and their ultrafast relaxation in CH(NH2)2PbI3 nanocube superlattices. Our results unveil that the coherent ultrafast dynamics is limited by the combination of the inherent short exciton decay time ~40 fs and the dephasing due to the coupling with selective optical phonon modes at higher temperatures. On the picosecond timescale, we observe the progressive formation of long-lived localized trap states. The analysis of the temperature dependence of the excitonic intrinsic linewidth, as extracted by the anti-diagonal components of the 2D spectra, unveils a dramatic change of the excitonic coherence time across the cubic to tetragonal structural transition. Our results offer a new way to control and enhance the ultrafast coherent dynamics of photocarrier generation in hybrid halide perovskite synthetic solids.
△ Less
Submitted 19 July, 2024; v1 submitted 30 January, 2024;
originally announced January 2024.
-
Halide perovskite artificial solids as a new platform to simulate collective phenomena in doped Mott insulators
Authors:
Alessandra Milloch,
Umberto Filippi,
Paolo Franceschini,
Michele Galvani,
Selene Mor,
Stefania Pagliara,
Gabriele Ferrini,
Francesco Banfi,
Massimo Capone,
Dmitry Baranov,
Liberato Manna,
Claudio Giannetti
Abstract:
The development of Quantum Simulators, artificial platforms where the predictions of many-body theories of correlated quantum materials can be tested in a controllable and tunable way, is one of the main challenges of condensed matter physics. Here we introduce artificial lattices made of lead halide perovskite nanocubes as a new platform to simulate and investigate the physics of correlated quant…
▽ More
The development of Quantum Simulators, artificial platforms where the predictions of many-body theories of correlated quantum materials can be tested in a controllable and tunable way, is one of the main challenges of condensed matter physics. Here we introduce artificial lattices made of lead halide perovskite nanocubes as a new platform to simulate and investigate the physics of correlated quantum materials. The ultrafast optical injection of quantum confined excitons plays the role of doping in real materials. We show that, at large photo-doping, the exciton gas undergoes an excitonic Mott transition, which fully realizes the magnetic-field-driven insulator-to-metal transition described by the Hubbard model. At lower photo-doping, the long-range interactions drive the formation of a collective superradiant state, in which the phases of the excitons generated in each single perovskite nanocube are coherently locked. Our results demonstrate that time-resolved experiments span a parameter region of the Hubbard model in which long-range and phase-coherent orders emerge out of a doped Mott insulating phase. This physics is relevant for a broad class of phenomena, such as superconductivity and charge-density waves in correlated materials whose properties are captured by doped Hubbard models.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Control of electronic band profiles through depletion layer engineering in core-shell nanocrystals
Authors:
Michele Ghini,
Nicola Curreli,
Matteo B. Lodi,
Nicolò Petrini,
Mengjiao Wang,
Mirko Prato,
Alessandro Fanti,
Liberato Manna,
Ilka Kriegel
Abstract:
The understanding of depletion layers is of major importance to control the optical and electronic properties of metal oxide (MO) nanocrystals (NCs). Here, we show that depletion layer engineering is the main mechanism of photodoping of MO NCs. We show that the introduction of different electronic interfaces induces a double-bending of the electronic bands and a distinct carrier density profile. W…
▽ More
The understanding of depletion layers is of major importance to control the optical and electronic properties of metal oxide (MO) nanocrystals (NCs). Here, we show that depletion layer engineering is the main mechanism of photodoping of MO NCs. We show that the introduction of different electronic interfaces induces a double-bending of the electronic bands and a distinct carrier density profile. We found that the light-induced depletion layer modulation and bending of the bands close to the surface of the nanocrystal is the main mechanism responsible for the storage of extra electrons after photodoping in MO NCs. We support our results by a combined experimental and theoretical approach in the case of Sn:In2O3/In2O3 core-shell NCs, in which we compare numerical simulations with empirical modeling and experiments. This allows not only to extract the main mechanism of photodoping in MO NCs but also to engineer the charge storage capability of MO NCs after photodoping. Our results are transferable to other core-multishell systems, opening up a novel direction to control the optoelectronic properties of nanoscale MOs by designing their energetic band profiles through depletion layer engineering.
△ Less
Submitted 28 August, 2021;
originally announced August 2021.
-
Temporal Evolution of Self-Assembled Lead Halide Perovskite Nanocrystal Superlattices: Effects on Photoluminescence and Energy Transfer
Authors:
Dmitry Baranov,
Antonio Fieramosca,
Ruo Xi Yang,
Laura Polimeno,
Giovanni Lerario,
Stefano Toso,
Carlo Giansante,
Milena De Giorgi,
Liang Z. Tan,
Daniele Sanvitto,
Liberato Manna
Abstract:
Excitonic/electronic coupling and cooperative interactions in self-assembled lead halide perovskite nanocrystals were reported to give rise to a collective low energy emission peak with accelerated dynamics. Here we report that similar spectroscopic features could appear as a result of the nanocrystal reactivity within the self-assembled superlattices. This is demonstrated by using CsPbBr3 nanocry…
▽ More
Excitonic/electronic coupling and cooperative interactions in self-assembled lead halide perovskite nanocrystals were reported to give rise to a collective low energy emission peak with accelerated dynamics. Here we report that similar spectroscopic features could appear as a result of the nanocrystal reactivity within the self-assembled superlattices. This is demonstrated by using CsPbBr3 nanocrystal superlattices under room temperature and cryogenic micro-photoluminescence spectroscopy. It is shown that keeping such structures under vacuum, a gradual contraction of the superlattices and subsequent coalescence of the nanocrystals occurs over several days. As a result, a narrow, low energy emission peak is observed at 4 K with a concomitant shortening of the photoluminescence lifetime due to the energy transfer between nanocrystals. When exposed to air, self-assembled CsPbBr3 nanocrystals develop bulk-like CsPbBr3 particles on top of the superlattices. At 4 K, these particles produce a distribution of narrow, low energy emission peaks with short lifetimes and excitation fluence-dependent, oscillatory decays, resembling the features of superfluorescence. Overall, the reactivity of CsPbBr3 nanocrystals dramatically alters the emission of their assemblies, which should not be overlooked when studying collective optoelectronic properties nor confused with superfluorescence effects.
△ Less
Submitted 6 August, 2020;
originally announced August 2020.
-
Temperature Driven Transformation of CsPbBr$_3$ Nanoplatelets into Mosaic Nanotiles in Solution through Self-Assembly
Authors:
Zhiya Dang,
Balaji Dhanabalan,
Andrea Castelli,
Rohan Dhall,
Karen C. Bustillo,
Dorwal Marchelli,
Davide Spirito,
Urko Petralanda,
Javad Shamsi,
Liberato Manna,
Roman Krahne,
Milena P. Arciniegas
Abstract:
Two-dimensional colloidal halide perovskite nanocrystals are promising materials for light emitting applications. In addition, they can be used as components to create a variety of materials through physical and chemical transformations. Recent studies focused on nanoplatelets that are able to self-assemble and transform on solid substrates. Yet, the mechanism behind the process and the atomic arr…
▽ More
Two-dimensional colloidal halide perovskite nanocrystals are promising materials for light emitting applications. In addition, they can be used as components to create a variety of materials through physical and chemical transformations. Recent studies focused on nanoplatelets that are able to self-assemble and transform on solid substrates. Yet, the mechanism behind the process and the atomic arrangement of their assemblies remain unclear. Here, we present the transformation of self-assembled stacks of CsPbBr$_3$ nanoplatelets in solution, capturing the different stages of the process by keeping the solutions at room temperature and monitoring the nanocrystal morphology over a period of a few months. Using ex-situ transmission electron microscopy and surface analysis, we demonstrate that the transformation mechanism can be understood as oriented attachment, proceeding through the following steps: i) desorption of the ligands from the particles surfaces, causing the merging of nanoplatelet stacks, which first form nanobelts; ii) merging of neighboring nanobelts that form more extended nanoplates; and iii) attachment of nanobelts and nanoplates, which create objects with an atomic structure that resemble a mosaic made of broken nanotiles. We reveal that the starting nanoplatelets merge seamlessly and defect-free on an atomic scale in small and thin nanobelts. However, aged nanobelts and nanoplates, which are mainly stabilized by amine/ammonium ions, link through a bilayer of CsBr. In this case, the atomic columns of neighboring perovskite lattices shift by a half-unit-cell, forming Ruddlesden-Popper planar faults.
△ Less
Submitted 4 May, 2020;
originally announced May 2020.
-
Composition, Size, and Surface Functionalization dependent Optical Properties of Lead Bromide Perovskite Nanocrystals
Authors:
Palvasha Ijaz,
Muhammad Imran,
Márcio M. Soares,
Hélio C. N. Tolentino,
Beatriz Martín-García,
Cinzia Giannini,
Iwan Moreels,
Liberato Manna,
Roman Krahne
Abstract:
The photoluminescence (PL), color purity, and stability of lead halide perovskite nanocrystals depend critically on the surface passivation. We present a study on the temperature dependent PL and PL decay dynamics of lead bromide perovskite nanocrystals characterized by different types of A cations, surface ligands, and nanocrystal sizes. Throughout, we observe a single emission peak from cryogeni…
▽ More
The photoluminescence (PL), color purity, and stability of lead halide perovskite nanocrystals depend critically on the surface passivation. We present a study on the temperature dependent PL and PL decay dynamics of lead bromide perovskite nanocrystals characterized by different types of A cations, surface ligands, and nanocrystal sizes. Throughout, we observe a single emission peak from cryogenic to ambient temperature. The PL decay dynamics are dominated by the surface passivation, and a post-synthesis ligand exchange with a quaternary ammonium bromide (QAB) results in a more stable passivation over a larger temperature range. The PL intensity is highest from 50K-250K, which indicates that the ligand binding competes with the thermal energy at ambient temperature. Despite the favorable PL dynamics of nanocrystals passivated with QAB ligands (monoexponential PL decay over a large temperature range, increased PL intensity and stability), the surface passivation still needs improvement toward increased emission intensity in nanocrystal films.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
Directional Anisotropy of the Vibrational Modes in 2D Layered Perovskites
Authors:
Balaji Dhanabalan,
Yu-Chen Leng,
Giulia Biffi,
Miao-Ling Lin,
Ping-Heng Tan,
Ivan Infante,
Liberato Manna,
Milena P. Arciniegas,
Roman Krahne
Abstract:
The vibrational modes in organic/inorganic layered perovskites are of fundamental importance for their optoelectronic properties. The hierarchical architecture of the Ruddlesden-Popper phase of these materials allows for distinct directionality of the vibrational modes withrespect to the main axes of the pseudocubic lattice in the octahedral plane. Here, we study the directionality of the fundamen…
▽ More
The vibrational modes in organic/inorganic layered perovskites are of fundamental importance for their optoelectronic properties. The hierarchical architecture of the Ruddlesden-Popper phase of these materials allows for distinct directionality of the vibrational modes withrespect to the main axes of the pseudocubic lattice in the octahedral plane. Here, we study the directionality of the fundamental phonon modes in single exfoliated Ruddlesden-Popper perovskite flakes with polarized Raman spectroscopy at ultralow-frequencies. A wealth of Raman bands is distinguished in the range from 15-150 cm-1 (2-15 meV), whose features depend on the organic cation species, on temperature, and on the direction of the linear polarization of the incident light. By controlling the angle of the linear polarization of the excitation laser with respect to the in-plane axes of the octahedral layer, we gain detailed information on the symmetry of the vibrational modes. The choice of two different organic moieties, phenethylammonium (PEA) and butylammonium (BA) allows to discern the influence of the linker molecules, evidencing strong anisotropy of the vibrations for the (PEA)2PbBr4 samples. Temperature dependent Raman measurements reveal that the broad phonon bands observed at room temperature consist of a series of sharp modes, and that such mode splitting strongly differs for the different organic moieties and vibrational bands.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
Core/Shell CdSe/CdS Bone-Shaped Nanocrystals with a Thick and Anisotropic Shell as Optical Emitters
Authors:
Andrea Castelli,
Balaji Dhanabalan,
Anatolii Polovitsyn,
Vincenzo Caligiuri,
Francesco Di Stasio,
Alice Scarpellini,
Rosaria Brescia,
Milan Palei,
Beatriz Martin-Garcia,
Mirko Prato,
Liberato Manna,
Iwan Moreels,
Roman Krahne,
Milena P. Arciniegas
Abstract:
Colloidal core/shell nanocrystals are key materials for optoelectronics, enabling control over essential properties via precise engineering of the shape, thickness, and crystal lattice structure of their shell. Here, we apply the growth protocol for CdS branched nanocrystals on CdSe nanoplatelet seeds and obtain bone-shaped heterostructures with a highly anisotropic shell. Surprisingly, the nanopl…
▽ More
Colloidal core/shell nanocrystals are key materials for optoelectronics, enabling control over essential properties via precise engineering of the shape, thickness, and crystal lattice structure of their shell. Here, we apply the growth protocol for CdS branched nanocrystals on CdSe nanoplatelet seeds and obtain bone-shaped heterostructures with a highly anisotropic shell. Surprisingly, the nanoplatelets withstand the high growth temperature of 350 °C and we obtain structures with a CdSe nanoplatelet core that is overcoated by a shell of cubic CdS, on top of which tetrahedral CdS structures with hexagonal lattice are formed. These complex core/shell nanocrystals show a bandedge emission around 657 nm with a photoluminescence quantum yield of ca. 42 % in solution, which is also retained in thin films. Interestingly, the nanocrystals manifest simultaneous red and green emission, and the relatively long wavelength of the green emission indicates charge recombination at the cubic/hexagonal interface of the CdS shell. The nanocrystal films show amplified spontaneous emission, random lasing, and distributed feedback lasing when the material is deposited on suitable gratings. Our work stimulates the design and fabrication of more exotic core/shell heterostructures where charge carrier delocalization, dipole moment, and other optical and electrical properties can be engineered.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
Nano- and microscale apertures in metal films fabricated by colloidal lithography with perovskite nanocrystals
Authors:
Davide Spirito,
Javad Shamsi,
Muhammad Imran,
Quinten A. Akkerman,
Liberato Manna,
Roman Krahne
Abstract:
We demonstrate patterning of metal surfaces based on lift-off of perovskite nanocrystals that enables the fabrication of nanometer-size features without the use of resist-based nanolithography. The perovskite nanocrystals act as templates for defining the shape of the apertures in metal layers, and we exploit the variety of sizes and shapes that can be controlled in the colloidal synthesis to demo…
▽ More
We demonstrate patterning of metal surfaces based on lift-off of perovskite nanocrystals that enables the fabrication of nanometer-size features without the use of resist-based nanolithography. The perovskite nanocrystals act as templates for defining the shape of the apertures in metal layers, and we exploit the variety of sizes and shapes that can be controlled in the colloidal synthesis to demonstrate the fabrication of nanoholes, nanogaps and guides with size smaller than the wavelength of light in the visible spectrum. The process can be readily integrated with standard lithography and etching techniques for the creation of more complex structures.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
Octapod-shaped CdSe nanocrystals hosting Pt with high-mass activity for the hydrogen evolution reaction
Authors:
Leyla Najafi,
Sebastiano Bellani,
Andrea Castelli,
Milena P. Arciniegas,
Rosaria Brescia,
Reinier Oropesa-Nuñez,
Beatriz Martín-García,
Michele Serri,
Filippo Drago,
Liberato Manna,
Francesco Bonaccorso
Abstract:
The design of efficient electrocatalysts for electrochemical water splitting with minimal amount of precious metal is crucial to attain renewable and sustainable energy conversion. Here, we report the use of a network of CdSe branched colloidal nanocrystals, made of a CdSe core and eight CdSe pods (so-called octapods), able to host on their pods Pt particles, and thus catalyzing water splitting re…
▽ More
The design of efficient electrocatalysts for electrochemical water splitting with minimal amount of precious metal is crucial to attain renewable and sustainable energy conversion. Here, we report the use of a network of CdSe branched colloidal nanocrystals, made of a CdSe core and eight CdSe pods (so-called octapods), able to host on their pods Pt particles, and thus catalyzing water splitting reactions. Thanks to the octapod shape, the resulting Pt-hosting network is mechanically trapped onto carbon nanotube buckypaper, providing mechanically flexible and binder-free electrodes. We found that such hierarchical configuration maximizes the mass activity and the utilization efficiency of Pt for the hydrogen evolution reaction (HER). At a potential of -0.15 V vs. reversible hydrogen electrode, the Pt/octapod network-based electrodes display a Pt mass activity on the HER of 166 A mg-1 and 42 A mg-1 in acidic and alkaline media, respectively. These values correspond to turnover frequencies of 168 s-1 and 42 s-1, respectively, which are in that order 14 and 21 times higher compared to commercially available Pt/C benchmarks. The strong chemical and mechanical interactions between the Pt and the octapod surface, along with pod-aided adhesion of the Pt/octapod network to the buckypaper, result in a long-term durability (>20 h) of the HER-activity in both media. These results experimentally prove that the exploitation of our network of branched nanocrystals hosting Pt particles can circumvent the durability issues of the catalysts while adopting either ultralow Pt loadings or benchmarking carbon-supported Pt nanocrystals. Our work opens up prospects for using porous networks made by branched nanocrystals as catalysts with ultralow amount of noble metals and controlled catalytic properties.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
Imaging localized plasmon resonances in vacancy doped Cu3-xP semiconductor nanocrystals with STEM-EELS
Authors:
Giovanni Bertoni,
Rosaria Brescia,
Luca De Trizio,
Liberato Manna,
Quentin Ramasse
Abstract:
Copper binary compounds are often intrinsic p-type semiconductors due to the presence of Cu(I) vacancies, with corresponding hole carriers in the valence band. If the free carrier concentration is high enough, localized plasmon resonances can be sustained in nanocrystals, with frequencies in the infra-red (<1 eV), with respect to the typical resonances seen in the visible range in the case of meta…
▽ More
Copper binary compounds are often intrinsic p-type semiconductors due to the presence of Cu(I) vacancies, with corresponding hole carriers in the valence band. If the free carrier concentration is high enough, localized plasmon resonances can be sustained in nanocrystals, with frequencies in the infra-red (<1 eV), with respect to the typical resonances seen in the visible range in the case of metals (Ag, Au, ...). The localization of the resonances can be demonstrated with scanning transmission electron energy loss spectroscopy (STEM-EELS) by combining high spatial and high energy resolutions. Here we demonstrate that Cu(I) vacancies can be directly measured from the STEM images in Cu(3-x)P hexagonal nanocrystals. Two localized resonances can be seen from STEM-EELS, which are in agreement with the resonances calculated from the vacancy concentration obtained from the STEM.
△ Less
Submitted 12 July, 2019;
originally announced July 2019.
-
Ultrafast THz probe of photo-induced polarons in lead-halide perovskites
Authors:
Eugenio Cinquanta,
Daniele Meggiolaro,
Silvia G. Motti,
Marina Gandini,
Marcelo J. P. Alcocer,
Quinten Adriaan Akkerman,
Caterina Vozzi,
Liberato Manna,
Filippo De Angelis,
Annamaria Petrozza,
Salvatore Stagira
Abstract:
We study the nature of photo-excited charge carriers in CsPbBr3 nanocrystal thin films by ultrafast optical pump - THz probe spectroscopy. We observe a deviation from a pure Drude dispersion of the THz dielectric response that is ascribed to the polaronic nature of carriers; a transient blueshift of observed phonon frequencies is indicative of the coupling between photogenerated charges and stretc…
▽ More
We study the nature of photo-excited charge carriers in CsPbBr3 nanocrystal thin films by ultrafast optical pump - THz probe spectroscopy. We observe a deviation from a pure Drude dispersion of the THz dielectric response that is ascribed to the polaronic nature of carriers; a transient blueshift of observed phonon frequencies is indicative of the coupling between photogenerated charges and stretching-bending modes of the deformed inorganic sublattice, as confirmed by DFT calculations.
△ Less
Submitted 12 December, 2018;
originally announced December 2018.
-
Single-mode lasing from colloidal water-soluble CdSe/CdS quantum dot-in-rods
Authors:
Francesco Di Stasio,
Joel Q Grim,
Vladimir Lesnyak,
Prachi Rastogi,
Liberato Manna,
Iwan Moreels,
Roman Krahne
Abstract:
Core-shell CdSe/CdS nanocrystals are a very promising material for light emitting applications. Their solution-phase synthesis is based on surface-stabilizing ligands that makes them soluble in organic solvents, like toluene or chloroform. However, solubility of these materials in water provides many advantages, such as additional process routes and easier handling. So far, solubilization of CdSe/…
▽ More
Core-shell CdSe/CdS nanocrystals are a very promising material for light emitting applications. Their solution-phase synthesis is based on surface-stabilizing ligands that makes them soluble in organic solvents, like toluene or chloroform. However, solubility of these materials in water provides many advantages, such as additional process routes and easier handling. So far, solubilization of CdSe/CdS nanocrystals in water that avoids detrimental effects on the luminescent properties, poses a major challenge. This work demonstrates how core-shell CdSe/CdS quantum dot-in-rods can be transferred into water using a ligand exchange method employing mercaptopropionic acid (MPA). Key to maintaining the light-emitting properties is an enlarged CdS rod diameter, which prevents potential surface defects formed during the ligand exchange from affecting the photophysics of the dot-in-rods. Films made from water-soluble dot-in-rods show amplified spontaneous emission (ASE) with a similar threshold (130 microJ/cm2) as the pristine material (115 microJ/cm2). To demonstrate feasibility for lasing applications, self-assembled micro lasers are fabricated via the coffee-ring effect that display single-mode operation and a very low threshold of around 10 microJ/cm2. The performance of these micro lasers is enhanced by the small size of MPA ligands, enabling a high packing density of the dot-in-rods.
△ Less
Submitted 2 May, 2018;
originally announced May 2018.
-
Writing on Nanocrystals: Patterning Colloidal Inorganic Nanocrystal Films through Irradiation-Induced Chemical Transformations of Surface Ligands
Authors:
Francisco Palazon,
Mirko Prato,
Liberato Manna
Abstract:
In the past couple of decades, colloidal inorganic nanocrystals and, more specifically, semiconductor quantum dots have emerged as crucial materials for the development of nanoscience and nanotechnology, with applications in very diverse areas such as optoelectronics and biotechnology. Films made of inorganic NCs deposited on a substrate can be patterned by e-beam lithography, altering the structu…
▽ More
In the past couple of decades, colloidal inorganic nanocrystals and, more specifically, semiconductor quantum dots have emerged as crucial materials for the development of nanoscience and nanotechnology, with applications in very diverse areas such as optoelectronics and biotechnology. Films made of inorganic NCs deposited on a substrate can be patterned by e-beam lithography, altering the structure of their capping ligands and thus allowing exposed areas to remain on the substrate while non-exposed areas are redispersed in a solvent, as in a standard lift-off process. This methodology can be described as a direct lithography process, since the exposure is performed directly on the material of interest, in contrast with conventional lithography which uses a polymeric resist as a mask for subsequent material deposition or etching. A few reports from the late 1990 and early 2000 used such direct lithography to fabricate electrical wires from metallic NCs. However, the poor conductivity obtained through this process hindered the widespread use of the technique. In the early 2010, the same method was used to define fluorescent patterns on QD films, allowing for further applications in biosensing. For the past 2 ,3 years, direct lithography on NC films with e-beams and X rays has gone through an important development as it has been demonstrated that it can tune further transformations on the NCs, leading to more complex patternings and opening a whole new set of possible applications.
△ Less
Submitted 5 January, 2018;
originally announced January 2018.
-
Colloidal Synthesis of Strongly Fluorescent CsPbBr3 Nanowires with Width Tunable down to the Quantum Confinement Regime
Authors:
Muhammad Imran,
Francesco Di Stasio,
Zhiya Dang,
Claudio Canale,
Ali Hossain Khan,
Javad Shamsi,
Rosaria Brescia,
Mirko Prato,
Liberato Manna
Abstract:
We report the colloidal synthesis of strongly fluorescent CsPbBr3 perovskite nanowires (NWs) with rectangular section and with tuneable width, from 20 nm (exhibiting no quantum confinement, hence emitting in the green) down to around 3 nm (in the strong quan-tum-confinement regime, emitting in the blue), by introducing in the synthesis a short acid (octanoic acid or hexanoic acid) together with al…
▽ More
We report the colloidal synthesis of strongly fluorescent CsPbBr3 perovskite nanowires (NWs) with rectangular section and with tuneable width, from 20 nm (exhibiting no quantum confinement, hence emitting in the green) down to around 3 nm (in the strong quan-tum-confinement regime, emitting in the blue), by introducing in the synthesis a short acid (octanoic acid or hexanoic acid) together with alkyl amines (octylamine and oleylamine). Temperatures below 70 °C promoted the formation of monodisperse, few unit cell thick NWs that were free from byproducts. The photoluminescence quantum yield of the NW samples went from 12% for non-confined NWs emitting at 524 nm to a maximum of 77% for the 5 nm diameter NWs emitting at 497 nm, down to 30% for the thinnest NWs (diameter ~ 3nm), in the latter sample most likely due to aggregation occurring in solution.
△ Less
Submitted 25 October, 2016;
originally announced October 2016.
-
Colloidal CuFeS2 Nanocrystals: Intermediate Fe d-Band Leads to High Photothermal Conversion Efficiency
Authors:
S. Ghosh,
T. Avellini,
A. Petrelli,
I. Kriegel,
R. Gaspari,
G. Almeida,
G. Bertoni,
A. Cavalli,
F. Scotognella,
T. Pellegrino,
L. Manna
Abstract:
We describe the colloidal hot-injection synthesis of phase-pure nanocrystals (NCs) of a highly abundant mineral, chalcopyrite (CuFeS2). Absorption bands centered at around 480 and 950 nm, spanning almost the entire visible and near infrared regions, encompass their optical extinction characteristics. These peaks are ascribable to electronic transitions from the valence band (VB) to the empty inter…
▽ More
We describe the colloidal hot-injection synthesis of phase-pure nanocrystals (NCs) of a highly abundant mineral, chalcopyrite (CuFeS2). Absorption bands centered at around 480 and 950 nm, spanning almost the entire visible and near infrared regions, encompass their optical extinction characteristics. These peaks are ascribable to electronic transitions from the valence band (VB) to the empty intermediate band (IB), located in the fundamental gap and mainly composed of Fe 3d orbitals. Laser-irradiation (at 808 nm) of an aqueous suspension of CuFeS2 NCs exhibited significant heating, with a photothermal conversion efficiency of 49%. Such efficient heating is ascribable to the carrier relaxation within the broad IB band (owing to the indirect VB-IB gap), as corroborated by transient absorption measurements. The intense absorption and high photothermal transduction efficiency (PTE) of these NCs in the so-called biological window (650-900 nm) makes them suitable for photothermal therapy as demonstrated by tumor cell annihilation upon laser irradiation. The otherwise harmless nature of these NCs in dark conditions was confirmed by in vitro toxicity tests on two different cell lines. The presence of the deep Fe levels constituting the IB is the origin of such enhanced PTE, which can be used to design other high performing NC photothermal agents.
△ Less
Submitted 16 September, 2016;
originally announced September 2016.
-
Thermal Stability and Anisotropic Sublimation of Two-Dimensional Colloidal Bi2Te3 and Bi2Se3 Nanocrystals
Authors:
Joka Buha,
Roberto Gaspari,
Antonio Esau Del Rio Castillo,
Francesco Bonaccorso,
Liberato Manna
Abstract:
The structural and compositional stabilities of two dimensional 2D Bi2Te3 and Bi2Se3 nanocrystals, produced by both colloidal synthesis and by liquid phase exfoliation, were studied by in situ transmission electron microscopy TEM during annealing at temperatures between 350 and 500 C. The sublimation process induced by annealing is structurally and chemically anisotropic and takes place through th…
▽ More
The structural and compositional stabilities of two dimensional 2D Bi2Te3 and Bi2Se3 nanocrystals, produced by both colloidal synthesis and by liquid phase exfoliation, were studied by in situ transmission electron microscopy TEM during annealing at temperatures between 350 and 500 C. The sublimation process induced by annealing is structurally and chemically anisotropic and takes place through the preferential dismantling of the prismatic 011-0 type planes, and through the preferential sublimation of Te or Se.
△ Less
Submitted 16 September, 2016;
originally announced September 2016.
-
Influence of the Ion Coordination Number on Cation Exchange Reactions with Copper Telluride Nanocrystals
Authors:
Renyong Tu,
Yi Xie,
Giovanni Bertoni,
Aidin Lak,
Roberto Gaspari,
Arnaldo Rapallo,
Andrea Cavalli,
Luca De Trizio,
Liberato Manna
Abstract:
Cu2-xTe nanocubes were used as starting seeds to access metal telluride nanocrystals by cation exchanges at room temperature. The coordination number of the entering cations was found to play an important role in dictating the reaction pathways. The exchanges with tetrahedrally coordinated cations (i.e. with coordination number 4), such as Cd2+ or Hg2+, yielded monocrystalline CdTe or HgTe nanocry…
▽ More
Cu2-xTe nanocubes were used as starting seeds to access metal telluride nanocrystals by cation exchanges at room temperature. The coordination number of the entering cations was found to play an important role in dictating the reaction pathways. The exchanges with tetrahedrally coordinated cations (i.e. with coordination number 4), such as Cd2+ or Hg2+, yielded monocrystalline CdTe or HgTe nanocrystals with Cu2-xTe/CdTe or Cu2-xTe/HgTe Janus-like heterostructures as intermediates. The formation of Janus-like architectures was attributed to the high diffusion rate of the relatively small tetrahedrally coordinated cations, which could rapidly diffuse in the Cu2-xTe NCs and nucleate the CdTe (or HgTe) phase in a preferred region of the host structure. Also, with both Cd2+ and Hg2+ ions the exchange led to wurtzite CdTe and HgTe phases rather than the more stable zinc-blende ones, indicating that the anion framework of the starting Cu2- xTe particles could be more easily deformed to match the anion framework of the metastable wurtzite structures. As hexagonal HgTe had never been reported to date, this represents another case of metastable new phases that can only be accessed by cation exchange. On the other hand, the exchanges involving octahedrally coordinated ions (i.e. with coordination number 6), such as Pb2+ or Sn2+, yielded rock-salt polycrystalline PbTe or SnTe nanocrystals with Cu2-xTe@PbTe or Cu2-xTe@SnTe core@shell architectures at the early stages of the exchange process. In this case, the octahedrally coordinated ions are probably too large to diffuse easily through the Cu2-xTe structure: their limited diffusion rate restricts their initial reaction to the surface of the nanocrystals, where cation exchange is initiated unselectively, leading to core@shell architectures.
△ Less
Submitted 15 September, 2016;
originally announced September 2016.
-
Spinning nanorods - active optical manipulation of semiconductor nanorods using polarised light
Authors:
C. Robin Head,
Elena Kammann,
Marco Zanella,
Liberato Manna,
Pavlos G. Lagoudakis
Abstract:
In this Letter we show how a single beam optical trap offers the means for three-dimensional manipulation of semiconductor nanorods in solution. Furthermore rotation of the direction of the electric field provides control over the orientation of the nanorods, which is shown by polarisation analysis of two photon induced fluorescence. Statistics over tens of trapped agglomerates reveal a correlatio…
▽ More
In this Letter we show how a single beam optical trap offers the means for three-dimensional manipulation of semiconductor nanorods in solution. Furthermore rotation of the direction of the electric field provides control over the orientation of the nanorods, which is shown by polarisation analysis of two photon induced fluorescence. Statistics over tens of trapped agglomerates reveal a correlation between the measured degree of polarisation, the trap stiffness and the intensity of the emitted light, confirming that we are approaching the single particle limit.
△ Less
Submitted 3 March, 2012; v1 submitted 14 February, 2012;
originally announced February 2012.
