-
Roadmap for warm dense matter physics
Authors:
Jan Vorberger,
Frank Graziani,
David Riley,
Andrew D. Baczewski,
Isabelle Baraffe,
Mandy Bethkenhagen,
Simon Blouin,
Maximilian P. Böhme,
Michael Bonitz,
Michael Bussmann,
Alexis Casner,
Witold Cayzac,
Peter Celliers,
Gilles Chabrier,
Nicolas Chamel,
Dave Chapman,
Mohan Chen,
Jean Clérouin,
Gilbert Collins,
Federica Coppari,
Tilo Döppner,
Tobias Dornheim,
Luke B. Fletcher,
Dirk O. Gericke,
Siegfried Glenzer
, et al. (49 additional authors not shown)
Abstract:
This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technolog…
▽ More
This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations \& experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments and contemporary challenges that are faced by theoretical methods, and experimental techniques needed to create and diagnose warm dense matter. A large part of this roadmap is dedicated to specific warm dense matter systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.
△ Less
Submitted 5 May, 2025;
originally announced May 2025.
-
Proton Radiography Inversions with Source Extraction and Comparison to Mesh Methods
Authors:
J. Griff-McMahon,
V. Valenzuela-Villaseca,
S. Malko,
G. Fiksel,
M. J. Rosenberg,
D. B. Schaeffer,
W. Fox
Abstract:
Proton radiography is a central diagnostic technique for measuring electromagnetic (EM) fields in high-energy-density, laser-produced plasmas. In this technique, protons traverse the plasma where they accumulate small EM deflections which lead to variations in the proton fluence pattern on a detector. Path-integrated EM fields can then be extracted from the fluence image through an inversion proce…
▽ More
Proton radiography is a central diagnostic technique for measuring electromagnetic (EM) fields in high-energy-density, laser-produced plasmas. In this technique, protons traverse the plasma where they accumulate small EM deflections which lead to variations in the proton fluence pattern on a detector. Path-integrated EM fields can then be extracted from the fluence image through an inversion process. In this work, experiments of laser-driven foils were conducted on the OMEGA laser and magnetic field reconstructions were performed using both "fluence-based" techniques and high-fidelity "mesh-based" methods. We implement nonzero boundary conditions into the inversion and show their importance by comparing against mesh measurements. Good agreement between the methods is found only when nonzero boundary conditions are used. We also introduce an approach to determine the unperturbed proton source profile, which is a required input in fluence reconstruction algorithms. In this approach, a fluence inversion is embedded inside of a mesh region, which provides overconstrained magnetic boundary conditions. A source profile is then iteratively optimized to satisfy the boundary information. This method substantially enhances the accuracy in recovering EM fields. Lastly, we propose a scheme to quantify uncertainty in the final inversion that is introduced through errors in the source retrieval.
△ Less
Submitted 20 August, 2024;
originally announced August 2024.
-
X-ray imaging and electron temperature evolution in laser-driven magnetic reconnection experiments at the National Ignition Facility
Authors:
V. Valenzuela-Villaseca,
J. M. Molina,
D. B. Schaeffer,
S. Malko,
J. Griff-McMahon,
K. Lezhnin,
M. J. Rosenberg,
S. X. Hu,
D. Kalantar,
C. Trosseille,
H. -S. Park,
B. A. Remington,
G. Fiksel,
D. Uzdensky,
A. Bhattacharjee,
W. Fox
Abstract:
We present results from X-ray imaging of high-aspect-ratio magnetic reconnection experiments driven at the National Ignition Facility. Two parallel, self-magnetized, elongated laser-driven plumes are produced by tiling 40 laser beams. A magnetic reconnection layer is formed by the collision of the plumes. A gated X-ray framing pinhole camera with micro-channel plate (MCP) detector produces multipl…
▽ More
We present results from X-ray imaging of high-aspect-ratio magnetic reconnection experiments driven at the National Ignition Facility. Two parallel, self-magnetized, elongated laser-driven plumes are produced by tiling 40 laser beams. A magnetic reconnection layer is formed by the collision of the plumes. A gated X-ray framing pinhole camera with micro-channel plate (MCP) detector produces multiple images through various filters of the formation and evolution of both the plumes and current sheet. As the diagnostic integrates plasma self-emission along the line of sight, 2-dimensional electron temperature maps $\langle T_e \rangle_Y$ are constructed by taking the ratio of intensity of these images obtained with different filters. The plumes have a characteristic temperature $\langle T_e \rangle_Y = 240 \pm 20$ eV at 2 ns after the initial laser irradiation and exhibit a slow cooling up to 4 ns. The reconnection layer forms at 3 ns with a temperature $\langle T_e \rangle_Y = 280 \pm 50$ eV as the result of the collision of the plumes. The error bars of the plumes and current sheet temperatures separate at $4$ ns, showing the heating of the current sheet from colder inflows. Using a semi-analytical model, we find that the observed heating of the current sheet is consistent with being produced by electron-ion drag, rather than the conversion of magnetic to kinetic energy.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
Laser-driven ion and electron acceleration from near-critical density gas targets: towards high-repetition rate operation in the 1 PW, sub-100 fs laser interaction regime
Authors:
V. Ospina-Bohórquez,
C. Salgado-López,
M. Ehret,
S. Malko,
M. Salvadori,
T. Pisarczyk,
T. Chodukowski,
Z. Rusiniak,
M. Krupka,
P. GuillonM. Lendrin,
G. Pérez-Callejo,
C. Vlachos,
F. Hannachi,
M. Tarisien,
F. Consoli,
C. Verona,
G. Prestopino,
J. Dostal,
R. Dudzak,
J. L. Henares,
J. I. Apiñaniz,
D. DeLuis,
A. Debayle,
J. Caron,
T. Ceccotti
, et al. (12 additional authors not shown)
Abstract:
Ion acceleration from gaseous targets driven by relativistic-intensity lasers was demonstrated as early as the late 90s, yet most of the experiments conducted to date have involved picosecond-duration, Nd:glass lasers operating at low repetition rate. Here, we present measurements on the interaction of ultraintense ($\sim 10^{20}\,\rm W\,cm^{-2}$, 1 PW), ultrashort ($\sim 70\,\rm fs$) Ti:Sa laser…
▽ More
Ion acceleration from gaseous targets driven by relativistic-intensity lasers was demonstrated as early as the late 90s, yet most of the experiments conducted to date have involved picosecond-duration, Nd:glass lasers operating at low repetition rate. Here, we present measurements on the interaction of ultraintense ($\sim 10^{20}\,\rm W\,cm^{-2}$, 1 PW), ultrashort ($\sim 70\,\rm fs$) Ti:Sa laser pulses with near-critical ($\sim 10^{20}\,\rm cm^{-3}$) helium gas jets, a debris-free targetry compatible with high ($\sim 1\,\rm Hz$) repetition rate operation. We provide evidence of $α$ particles being forward accelerated up to $\sim 2.7\,\rm MeV$ energy with a total flux of $\sim 10^{11}\,\rm sr^{-1}$ as integrated over $>0.1 \,\rm MeV$ energies and detected within a $0.5\,\rm mrad$ solid angle. We also report on on-axis emission of relativistic electrons with an exponentially decaying spectrum characterized by a $\sim 10\,\rm MeV$ slope, i.e., five times larger than the standard ponderomotive scaling. The total charge of these electrons with energy above 2 MeV is estimated to be of $\sim 1 \,\rm nC$, corresponding to $\sim 0.1\,\%$ of the laser drive energy. In addition, we observe the formation of a plasma channel, extending longitudinally across the gas density maximum and expanding radially with time. These results are well captured by large-scale particle-in-cell simulations, which reveal that the detected fast ions most likely originate from reflection off the rapidly expanding channel walls. The latter process is predicted to yield ion energies in the MeV range, which compare well with the measurements. Finally, direct laser acceleration is shown to be the dominant mechanism behind the observed electron energization.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Measurements of Extended Magnetic Fields in Laser-Solid Interaction
Authors:
J. Griff-McMahon,
S. Malko,
V. Valenzuela-Villaseca,
C. Walsh,
G. Fiksel,
M. J. Rosenberg,
D. B. Schaeffer,
W. Fox
Abstract:
Magnetic fields generated from a laser-foil interaction are measured with high fidelity using a proton radiography scheme with in situ x-ray fiducials. In contrast to prior findings under similar experimental conditions, this technique reveals the self-generated, Biermann-battery fields extend beyond the edge of the expanding plasma plume to a radius of over 3.5 mm by t=+1.4 ns, a result not captu…
▽ More
Magnetic fields generated from a laser-foil interaction are measured with high fidelity using a proton radiography scheme with in situ x-ray fiducials. In contrast to prior findings under similar experimental conditions, this technique reveals the self-generated, Biermann-battery fields extend beyond the edge of the expanding plasma plume to a radius of over 3.5 mm by t=+1.4 ns, a result not captured in state-of-the-art magneto-hydrodynamics simulations. An analysis of two mono-energetic proton populations confirms that proton deflection is dominated by magnetic fields far from the interaction (>2 mm) and electric fields are insignificant. Comparisons to prior work suggest a new physics mechanism for the magnetic field generation and transport in laser-solid interactions.
△ Less
Submitted 28 October, 2023;
originally announced October 2023.
-
A Platform for Ultra-fast Proton Probing of Matter in Extreme Conditions
Authors:
Luca Volpe,
Alberto Perez,
Teresa Cebriano,
Carlos Sánchez Sánchez,
Sofia Malko,
Alessandro Curcio,
Samia Khetari
Abstract:
Recent development of Ultra short and Intense laser system paved the way for the generation of short and brilliant proton sources that can be used to study plasmas at extreme conditions in the context of High Energy Density physics. Energy selection, focusing and transport of such sources is still a challenge that is not completely solved. here we present a novel and simple design for a isochrone…
▽ More
Recent development of Ultra short and Intense laser system paved the way for the generation of short and brilliant proton sources that can be used to study plasmas at extreme conditions in the context of High Energy Density physics. Energy selection, focusing and transport of such sources is still a challenge that is not completely solved. here we present a novel and simple design for a isochrone magnetic selector capable of angular and energy selection of proton sources by drastically reducing the temporal spread if compared with the state of the art. The isochrone selector is demanded for studying proton stopping power in Warm Dense Matter close to the Bragg peak (proton energy below 1 MeV) where the reduced investigated masses imply a short plasma stagnation time ($<$ 100 ps). The proposed selector can also be used at higher proton energy by pushing the final time spread at the level of few ps with important implications for the study of coherent energy deposition in biology and medical physics. Analytical estimations and Monte Carlo simulations are presented to validate the proposed configurations.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Guided Electromagnetic Discharge Pulses Driven by Short Intense Laser Pulses: Characterisation and Modelling
Authors:
M. Ehret,
M. Bailly-Grandvaux,
Ph. Korneev,
J. I. Apiñaniz,
C. Brabetz,
A. Morace,
P. Bradford,
E. d'Humières,
G. Schaumann,
V. Bagnoud,
S. Malko,
C. Matveevskii,
M. Roth,
L. Volpe,
N. C. Woolsey,
J. J. Santos
Abstract:
Strong electromagnetic pulses (EMP) are generated from intense laser interactions with solid-density targets, and can be guided by the target geometry, specifically through conductive connections to the ground. We present an experimental characterization, by time- and spatial-resolved proton deflectometry, of guided electromagnetic discharge pulses along wires including a coil, driven by 0.5 ps, 5…
▽ More
Strong electromagnetic pulses (EMP) are generated from intense laser interactions with solid-density targets, and can be guided by the target geometry, specifically through conductive connections to the ground. We present an experimental characterization, by time- and spatial-resolved proton deflectometry, of guided electromagnetic discharge pulses along wires including a coil, driven by 0.5 ps, 50 J, 1e19 W/cm2 laser pulses. Proton-deflectometry data allows to time-resolve first the EMP due to the laser-driven target charging and then the return EMP from the ground through the conductive target stalk. Both EMPs have a typical duration of tens of ps and correspond to currents in the kA-range with electric-field amplitudes of multiple GV/m. The sub-mm coil in the target rod creates lensing effects on probing protons, due to both magnetic- and electric-field contributions. This way, protons of 10 MeV-energy range are focused over cm-scale distances. Experimental results are supported by analytical modelling and high-resolution numerical particle-in-cell simulations, unraveling the likely presence of a surface plasma, which parameters define the discharge pulse dispersion in the non-linear propagation regime.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Time-Of-Flight methodologies with large-area diamond detectors for the effectively characterization of tens of MeV protons
Authors:
M. Salvadori,
P. L. Andreoli,
M. Cipriani,
G. Cristofari,
R. De Angelis,
S. Malko,
L. Volpe,
J. A. Perez Hernandez,
J. I. Alpinaniz,
A. Morace,
P. Antici,
M. Migliorati,
G. Di Giorgio,
F. Consoli
Abstract:
A novel detector based on a polycrystalline diamond sensor is here employed in an advanced Time-Of-Flight scheme for the characterization of energetic ions accelerated during laser-matter interactions. The optimization of the detector and of the advanced TOF methodology allow to obtain signals characterized by high signal-to-noise ratio and high dynamic range even in the most challenging experimen…
▽ More
A novel detector based on a polycrystalline diamond sensor is here employed in an advanced Time-Of-Flight scheme for the characterization of energetic ions accelerated during laser-matter interactions. The optimization of the detector and of the advanced TOF methodology allow to obtain signals characterized by high signal-to-noise ratio and high dynamic range even in the most challenging experimental environments, where the interaction of high-intensity laser pulses with matter leads to effective ion acceleration, but also to the generation of strong Electromagnetic Pulses (EMPs) with intensities up to the MV/m order. These are known to be a serious threat for the fielded diagnostic systems. In this paper we report on the measurement performed with the PW-class laser system Vega 3 at CLPU (30 J energy, 10^21 W/cm2 intensity, 30 fs pulses) irradiating solid targets, where both tens of MeV ions and intense EMP fields were generated. The data were analyzed to retrieve a calibrated proton spectrum and in particular we focus on the analysis of the most energetic portion (E > 5.8 MeV) of the spectrum showing a procedure to deal with the intrinsic lower sensitivity of the detector in the mentioned spectral-range.
△ Less
Submitted 20 December, 2021;
originally announced December 2021.
-
Design of proton deflectometry with in situ X-ray fiducial for magnetized HED systems
Authors:
S. Malko,
C. Johnson,
D. B. Schaeffer,
W. Fox,
G. Fiksel
Abstract:
We report a design and implementation of proton radiography with an in situ reference X-ray image of a mesh to precisely measure non-uniform magnetic fields in expanding plasmas at the OMEGA and OMEGA EP laser facilities. The technique has been developed with proton and x-ray sources generated from both directly-driven capsule implosions and short pulse laser-solid interactions. The accuracy of th…
▽ More
We report a design and implementation of proton radiography with an in situ reference X-ray image of a mesh to precisely measure non-uniform magnetic fields in expanding plasmas at the OMEGA and OMEGA EP laser facilities. The technique has been developed with proton and x-ray sources generated from both directly-driven capsule implosions and short pulse laser-solid interactions. The accuracy of the measurement depends on the contrast of both the proton and x-ray images. We present numerical and analytic studies to optimize the image contrast using a variety of mesh materials and grid spacing. Our results show a clear enhancement of the image contrast by a factor of 4-6 using a high Z mesh with large grid spacing. This would lead to a further factor of two improvement in accuracy of the magnetic field measurement.
△ Less
Submitted 21 November, 2021;
originally announced November 2021.
-
Proton deflectometry with in situ x-ray reference for absolute measurement of electromagnetic fields in high-energy-density plasmas
Authors:
C. L. Johnson,
S. Malko,
W. Fox,
D. B. Schaeffer,
G. Fiksel,
P. J. Adrian,
G. Sutcliffe,
A. Birkel
Abstract:
We report a technique of proton deflectometry which uses a grid and an in situ reference x-ray grid image for precise measurements of magnetic fields in high-energy density plasmas. A D$^3$He fusion implosion provides a bright point-source of both protons and x-rays, which is split into beamlets by a mesh grid. The protons undergo deflections as they propagate through the plasma region of interest…
▽ More
We report a technique of proton deflectometry which uses a grid and an in situ reference x-ray grid image for precise measurements of magnetic fields in high-energy density plasmas. A D$^3$He fusion implosion provides a bright point-source of both protons and x-rays, which is split into beamlets by a mesh grid. The protons undergo deflections as they propagate through the plasma region of interest, whereas the x-rays travel along straight lines. The x-ray image therefore provides a zero-deflection reference image. The line-integrated magnetic fields are inferred from the shifts of beamlets between the deflected (proton) and reference (x-ray) images. We developed a system for analysis of this data, including automatic algorithms to find beamlet locations and calculate their deflections from the reference image. The technique is verified in an experiment performed at OMEGA to measure a non-uniform magnetic field in vacuum, then applied to observe the interaction of an expanding plasma plume with the magnetic field.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
A quasi-monoenergetic short time duration compact proton source for probing high energy density states of matter
Authors:
J. I. Apiñaniz,
S. Malko,
R. Fedosejevs,
W. Cayzac,
X. Vaisseau,
D. de Luis,
G. Gatti,
C. McGuffey,
M. Bailly-Grandvaux,
K. Bhutwala,
V. Ospina-Bohorquez,
J. Balboa,
J. J. Santos,
D. Batani,
F. Beg,
L. Roso,
J. A. Perez-Hernandez,
L. Volpe
Abstract:
We report on the development of a highly directional, narrow energy band, short time duration proton beam operating at high repetition rate, suitable for measurements of stopping power in high energy density plasmas as well as other applications. The protons are generated with an ultrashort-pulse laser interacting with a solid target and converted to a pencil-like narrow-band beam using a compact…
▽ More
We report on the development of a highly directional, narrow energy band, short time duration proton beam operating at high repetition rate, suitable for measurements of stopping power in high energy density plasmas as well as other applications. The protons are generated with an ultrashort-pulse laser interacting with a solid target and converted to a pencil-like narrow-band beam using a compact magnet-based energy selector. We experimentally demonstrate the production of a proton beam with an energy of 500 keV and energy spread well below 10%, and a pulse duration of 260 ps. The energy loss of this beam is measured in a 2 $μ$m thick solid Mylar target and found to be in within 1% of theoretical predictions. The short time duration of the proton pulse makes it particularly well suited for applications involving the probing of highly transient plasma states produced in laser-matter interaction experiments, in particular measurements of proton stopping power.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Integrated quantitative PIXE analysis and EDX spectroscopy using a laser-driven particle source
Authors:
F. Mirani,
A. Maffini,
F. Casamichiela,
A. Pazzaglia,
A. Formenti,
D. Dellasega,
V. Russo,
D. Vavassori,
D. Bortot,
M. Huault,
G. Zeraouli,
V. Ospina,
S. Malko,
J. I. Apiñaniz,
J. A. Perez-Hernández,
D. De Luis,
G. Gatti,
L. Volpe,
A. Pola,
M. Passoni
Abstract:
Among the existing elemental characterization techniques, Particle Induced X-ray Emission (PIXE) and Energy Dispersive X-ray (EDX) spectroscopy are two of the most widely used in different scientific and technological fields. Here we present the first quantitative laser-driven PIXE and laser-driven EDX experimental investigation performed at the Centro de Láseres Pulsados in Salamanca. Thanks to t…
▽ More
Among the existing elemental characterization techniques, Particle Induced X-ray Emission (PIXE) and Energy Dispersive X-ray (EDX) spectroscopy are two of the most widely used in different scientific and technological fields. Here we present the first quantitative laser-driven PIXE and laser-driven EDX experimental investigation performed at the Centro de Láseres Pulsados in Salamanca. Thanks to their potential for compactness and portability, laser-driven particle sources are very appealing for materials science applications, especially for materials analysis techniques. We demonstrate the possibility to exploit the X-ray signal produced by the co-irradiation with both electrons and protons to identify the elements in the sample. We show that, using the proton beam only, we can successfully obtain quantitative information about the sample structure through laser-driven PIXE analysis. These results pave the way towards the development of a compact and multi-functional apparatus for the elemental analysis of materials based on a laser-driven particle source.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Enhanced relativistic-electron beam collimation using two consecutive laser pulses
Authors:
S. Malko,
X. Vaisseau,
F. Perez,
D. Batani,
A. Curcio,
M. Ehret,
J. J. Honrubia,
K. Jakubowska,
A. Morace,
J. J. Santos,
L. Volpe
Abstract:
The double laser pulse approach to relativistic electron beam (REB) collimation has been investigated at the LULI-ELFIE facility. In this scheme, the magnetic field generated by the first laser-driven REB is used to guide a second delayed REB. We show how electron beam collimation can be controlled by properly adjusting laser parameters. By changing the ratio of focus size and the delay time betwe…
▽ More
The double laser pulse approach to relativistic electron beam (REB) collimation has been investigated at the LULI-ELFIE facility. In this scheme, the magnetic field generated by the first laser-driven REB is used to guide a second delayed REB. We show how electron beam collimation can be controlled by properly adjusting laser parameters. By changing the ratio of focus size and the delay time between the two pulses we found a maximum of electron beam collimation clearly dependent on the focal spot size ratio of the two laser pulses and related to the magnetic field dynamics. Cu-K alpha and CTR imaging diagnostics were implemented to evaluate the collimation effects on the respectively low energy (< 100 keV) and high energy (> MeV) components of the REB.
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
Generation of high energy laser-driven electron and proton sources with the 200 TW system VEGA 2 at the Centro de Laseres Pulsados
Authors:
L. Volpe,
R. Fedosejevs,
G. Gatti,
J. A. Pérez-Hernández,
C. Méndez,
J. Apiñaniz,
X. Vaisseau,
C. Salgado,
M. Huault,
S. Malko,
G. Zeraouli,
V. Ospina,
A. Longman,
D. De Luis,
K. Li,
O. Varela,
E. García,
I. Hernández,
J. D. Pisonero,
J. García Ajates,
J. M. Alvarez,
C. García,
M. Rico,
D. Arana,
J. Hernández-Toro
, et al. (1 additional authors not shown)
Abstract:
The Centro de Laseres Pulsados in Salamanca Spain has recently started operation phase and the first User access period on the 6 J 30 fs 200 TW system (VEGA 2) already started at the beginning of 2018. In this paper we report on two commissioning experiments recently performed on the VEGA 2 system in preparation for the user campaign. VEGA 2 system has been tested in different configurations depen…
▽ More
The Centro de Laseres Pulsados in Salamanca Spain has recently started operation phase and the first User access period on the 6 J 30 fs 200 TW system (VEGA 2) already started at the beginning of 2018. In this paper we report on two commissioning experiments recently performed on the VEGA 2 system in preparation for the user campaign. VEGA 2 system has been tested in different configurations depending on the focusing optics and targets used. One configuration (long focal length f=130 cm) is for under-dense laser-matter interaction where VEGA 2 is focused onto a low density gas-jet generating electron beams (via laser wake field acceleration mechanism) with maximum energy up to 500 MeV and an X-ray betatron source with a 10 keV critical energy. A second configuration (short focal length f=40 cm) is for over-dense laser-matter interaction where VEGA 2 is focused onto an 5 microns thick Al target generating a proton beam with a maximum energy of 10 MeV and average energy of 7-8 MeV and temperature of 2.5 MeV. In this paper we present preliminary experimental results.
△ Less
Submitted 11 November, 2018;
originally announced November 2018.
