-
High-fidelity heralded quantum state preparation and measurement
Authors:
A. S. Sotirova,
J. D. Leppard,
A. Vazquez-Brennan,
S. M. Decoppet,
F. Pokorny,
M. Malinowski,
C. J. Ballance
Abstract:
We present a novel protocol for high-fidelity qubit state preparation and measurement (SPAM) that combines standard SPAM methods with a series of in-sequence measurements to detect and remove errors. The protocol can be applied in any quantum system with a long-lived (metastable) level and a means to detect population outside of this level without coupling to it. We demonstrate the use of the prot…
▽ More
We present a novel protocol for high-fidelity qubit state preparation and measurement (SPAM) that combines standard SPAM methods with a series of in-sequence measurements to detect and remove errors. The protocol can be applied in any quantum system with a long-lived (metastable) level and a means to detect population outside of this level without coupling to it. We demonstrate the use of the protocol for three different qubit encodings in a single trapped $^{137}\mathrm{Ba}^+$ ion. For all three, we achieve the lowest reported SPAM infidelities of $7(4) \times 10^{-6}$ (optical qubit), $5(4) \times 10^{-6}$ (metastable-level qubit), and $8(4) \times 10^{-6}$ (ground-level qubit).
△ Less
Submitted 9 September, 2024;
originally announced September 2024.
-
Scalable, high-fidelity all-electronic control of trapped-ion qubits
Authors:
C. M. Löschnauer,
J. Mosca Toba,
A. C. Hughes,
S. A. King,
M. A. Weber,
R. Srinivas,
R. Matt,
R. Nourshargh,
D. T. C. Allcock,
C. J. Ballance,
C. Matthiesen,
M. Malinowski,
T. P. Harty
Abstract:
The central challenge of quantum computing is implementing high-fidelity quantum gates at scale. However, many existing approaches to qubit control suffer from a scale-performance trade-off, impeding progress towards the creation of useful devices. Here, we present a vision for an electronically controlled trapped-ion quantum computer that alleviates this bottleneck. Our architecture utilizes shar…
▽ More
The central challenge of quantum computing is implementing high-fidelity quantum gates at scale. However, many existing approaches to qubit control suffer from a scale-performance trade-off, impeding progress towards the creation of useful devices. Here, we present a vision for an electronically controlled trapped-ion quantum computer that alleviates this bottleneck. Our architecture utilizes shared current-carrying traces and local tuning electrodes in a microfabricated chip to perform quantum gates with low noise and crosstalk regardless of device size. To verify our approach, we experimentally demonstrate low-noise site-selective single- and two-qubit gates in a seven-zone ion trap that can control up to 10 qubits. We implement electronic single-qubit gates with 99.99916(7)% fidelity, and demonstrate consistent performance with low crosstalk across the device. We also electronically generate two-qubit maximally entangled states with 99.97(1)% fidelity and long-term stable performance over continuous system operation. These state-of-the-art results validate the path to directly scaling these techniques to large-scale quantum computers based on electronically controlled trapped-ion qubits.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Multi-zone trapped-ion qubit control in an integrated photonics QCCD device
Authors:
Carmelo Mordini,
Alfredo Ricci Vasquez,
Yuto Motohashi,
Mose Müller,
Maciej Malinowski,
Chi Zhang,
Karan K. Mehta,
Daniel Kienzler,
Jonathan P. Home
Abstract:
Multiplexed operations and extended coherent control over multiple trapping sites are fundamental requirements for a trapped-ion processor in a large scale architecture. Here we demonstrate these building blocks using a surface-electrode trap with integrated photonic components which are scalable to larger numbers of zones. We implement a Ramsey sequence using the integrated light in two zones, se…
▽ More
Multiplexed operations and extended coherent control over multiple trapping sites are fundamental requirements for a trapped-ion processor in a large scale architecture. Here we demonstrate these building blocks using a surface-electrode trap with integrated photonic components which are scalable to larger numbers of zones. We implement a Ramsey sequence using the integrated light in two zones, separated by 375 $μ$m, performing transport of the ion from one zone to the other in 200 $μ$s between pulses. In order to achieve low motional excitation during transport, we developed techniques to measure and mitigate the effect of the exposed dielectric surfaces used to deliver the integrated light to the ion. We also demonstrate simultaneous control of two ions in separate zones with low optical crosstalk, and use this to perform simultaneous spectroscopy to correlate field noise between the two sites. Our work demonstrates the first transport and coherent multi-zone operations in integrated photonic ion trap systems, forming the basis for further scaling in the trapped-ion QCCD architecture.
△ Less
Submitted 18 December, 2024; v1 submitted 31 January, 2024;
originally announced January 2024.
-
Coherent Control of Trapped Ion Qubits with Localized Electric Fields
Authors:
R. Srinivas,
C. M. Löschnauer,
M. Malinowski,
A. C. Hughes,
R. Nourshargh,
V. Negnevitsky,
D. T. C. Allcock,
S. A. King,
C. Matthiesen,
T. P. Harty,
C. J. Ballance
Abstract:
We present a new method for coherent control of trapped ion qubits in separate interaction regions of a multi-zone trap by simultaneously applying an electric field and a spin-dependent gradient. Both the phase and amplitude of the effective single-qubit rotation depend on the electric field, which can be localised to each zone. We demonstrate this interaction on a single ion using both laser-base…
▽ More
We present a new method for coherent control of trapped ion qubits in separate interaction regions of a multi-zone trap by simultaneously applying an electric field and a spin-dependent gradient. Both the phase and amplitude of the effective single-qubit rotation depend on the electric field, which can be localised to each zone. We demonstrate this interaction on a single ion using both laser-based and magnetic field gradients in a surface-electrode ion trap, and measure the localisation of the electric field.
△ Less
Submitted 28 October, 2022;
originally announced October 2022.
-
Control of an atomic quadrupole transition in a phase-stable standing wave
Authors:
Alfredo Ricci Vasquez,
Carmelo Mordini,
Chloé Vérnière,
Martin Stadler,
Maciej Malinowski,
Chi Zhang,
Daniel Kienzler,
Karan K. Mehta,
Jonathan P. Home
Abstract:
Using a single calcium ion confined in a surface-electrode trap, we study the interaction of electric quadrupole transitions with a passively phase-stable optical standing wave field sourced by photonics integrated within the trap. We characterize the optical fields through spatial mapping of the Rabi frequencies of both carrier and motional sideband transitions as well as AC Stark shifts. Our mea…
▽ More
Using a single calcium ion confined in a surface-electrode trap, we study the interaction of electric quadrupole transitions with a passively phase-stable optical standing wave field sourced by photonics integrated within the trap. We characterize the optical fields through spatial mapping of the Rabi frequencies of both carrier and motional sideband transitions as well as AC Stark shifts. Our measurements demonstrate the ability to engineer favorable combinations of sideband and carrier Rabi frequency as well as AC Stark shifts for specific tasks in quantum state control and metrology.
△ Less
Submitted 6 June, 2023; v1 submitted 5 October, 2022;
originally announced October 2022.
-
Generation of a maximally entangled state using collective optical pumping
Authors:
M. Malinowski,
C. Zhang,
V. Negnevitsky,
I. Rojkov,
F. Reiter,
T. -L. Nguyen,
M. Stadler,
D. Kienzler,
K. K. Mehta,
J. P. Home
Abstract:
We propose and implement a novel scheme for dissipatively pumping two qubits into a singlet Bell state. The method relies on a process of collective optical pumping to an excited level, to which all states apart from the singlet are coupled. We apply the method to deterministically entangle two trapped ${}^{40}\text{Ca}^+$ ions with a fidelity of $93(1)\%$. We theoretically analyze the performance…
▽ More
We propose and implement a novel scheme for dissipatively pumping two qubits into a singlet Bell state. The method relies on a process of collective optical pumping to an excited level, to which all states apart from the singlet are coupled. We apply the method to deterministically entangle two trapped ${}^{40}\text{Ca}^+$ ions with a fidelity of $93(1)\%$. We theoretically analyze the performance and error susceptibility of the scheme and find it to be insensitive to a large class of experimentally relevant noise sources.
△ Less
Submitted 21 July, 2021;
originally announced July 2021.
-
Integrated optical multi-ion quantum logic
Authors:
Karan K. Mehta,
Chi Zhang,
Maciej Malinowski,
Thanh-Long Nguyen,
Martin Stadler,
Jonathan P. Home
Abstract:
Practical and useful quantum information processing (QIP) requires significant improvements with respect to current systems, both in error rates of basic operations and in scale. Individual trapped-ion qubits' fundamental qualities are promising for long-term systems, but the optics involved in their precise control are a barrier to scaling. Planar-fabricated optics integrated within ion trap devi…
▽ More
Practical and useful quantum information processing (QIP) requires significant improvements with respect to current systems, both in error rates of basic operations and in scale. Individual trapped-ion qubits' fundamental qualities are promising for long-term systems, but the optics involved in their precise control are a barrier to scaling. Planar-fabricated optics integrated within ion trap devices can make such systems simultaneously more robust and parallelizable, as suggested by previous work with single ions. Here we use scalable optics co-fabricated with a surface-electrode ion trap to achieve high-fidelity multi-ion quantum logic gates, often the limiting elements in building up the precise, large-scale entanglement essential to quantum computation. Light is efficiently delivered to a trap chip in a cryogenic environment via direct fibre coupling on multiple channels, eliminating the need for beam alignment into vacuum systems and cryostats and lending robustness to vibrations and beam pointing drifts. This allows us to perform ground-state laser cooling of ion motion, and to implement gates generating two-ion entangled states with fidelities $>99.3(2)\%$. This work demonstrates hardware that reduces noise and drifts in sensitive quantum logic, and simultaneously offers a route to practical parallelization for high-fidelity quantum processors. Similar devices may also find applications in neutral atom and ion-based quantum-sensing and timekeeping.
△ Less
Submitted 13 July, 2020; v1 submitted 6 February, 2020;
originally announced February 2020.
-
Fully-Tensorial Elastic-Wave Mode-Solver in FEniCS for Stimulated Brillouin Scattering Modeling
Authors:
Marcin Malinowski,
Sasan Fathpour
Abstract:
A framework for simulating the elastic-wave modes in waveguides, taking into account the full tensorial nature of the stiffness tensor, is presented and implemented in the open-source finite element solver, FEniCS. Various approximations of the elastic wave equation used in the stimulated Brillouin scattering literature are implemented and their validity and applicability are discussed. The elasti…
▽ More
A framework for simulating the elastic-wave modes in waveguides, taking into account the full tensorial nature of the stiffness tensor, is presented and implemented in the open-source finite element solver, FEniCS. Various approximations of the elastic wave equation used in the stimulated Brillouin scattering literature are implemented and their validity and applicability are discussed. The elastic mode-solver is also coupled with an electromagnetic counterpart to study the influence of elastic anisotropies on Brillouin gain.
△ Less
Submitted 27 April, 2019; v1 submitted 5 December, 2018;
originally announced December 2018.
-
Second-harmonic generation in single-mode integrated waveguides through mode-shape modulation
Authors:
Jeff Chiles,
Seyfollah Toroghi,
Ashutosh Rao,
Marcin Malinowski,
Guillermo Fernando Camacho-González,
Sasan Fathpour
Abstract:
A simple and flexible technique for achieving quasi-phase-matching in integrated photonic waveguides without periodic poling is proposed and experimentally demonstrated, referred to as mode-shape-modulation (MSM). It employs a periodic variation of waveguide width to modulate the intensity of the pump wave, effectively suppressing out-of-phase light generation. This technique is applied to the cas…
▽ More
A simple and flexible technique for achieving quasi-phase-matching in integrated photonic waveguides without periodic poling is proposed and experimentally demonstrated, referred to as mode-shape-modulation (MSM). It employs a periodic variation of waveguide width to modulate the intensity of the pump wave, effectively suppressing out-of-phase light generation. This technique is applied to the case of second-harmonic generation in thin-film lithium niobate ridge waveguides. MSM waveguides are fabricated and characterized with pulsed-pumping in the near-infrared, showing harmonic generation at a signal wavelength of 784 nm.
△ Less
Submitted 6 October, 2016;
originally announced October 2016.
-
Second-harmonic generation in periodically-poled thin film lithium niobate wafer-bonded on silicon
Authors:
Ashutosh Rao,
Marcin Malinowski,
Amirmahdi Honardoost,
Javed Rouf Talukder,
Rayam Rabiei,
Peter Delfyett,
Sasan Fathpour
Abstract:
Second-order optical nonlinear effects (second-harmonic and sum-frequency generation) are demonstrated in the telecommunication band by periodic poling of thin films of lithium niobate wafer-bonded on silicon substrates and rib-loaded with silicon nitride channels to attain ridge waveguide with cross-sections of ~ 2 μm2. The compactness of the waveguides results in efficient second-order nonlinear…
▽ More
Second-order optical nonlinear effects (second-harmonic and sum-frequency generation) are demonstrated in the telecommunication band by periodic poling of thin films of lithium niobate wafer-bonded on silicon substrates and rib-loaded with silicon nitride channels to attain ridge waveguide with cross-sections of ~ 2 μm2. The compactness of the waveguides results in efficient second-order nonlinear devices. A nonlinear conversion of 8% is obtained with a pulsed input in 4 mm long waveguides. The choice of silicon substrate makes the platform potentially compatible with silicon photonics, and therefore may pave the path towards on-chip nonlinear and quantum-optic applications.
△ Less
Submitted 28 September, 2016;
originally announced September 2016.
-
Temperature dependence of Er3+ ionoluminescence and photoluminescence in Gd2O3:Bi nanopowder
Authors:
Zuzanna Boruc,
Grzegorz Gawlik,
Bartosz Fetliński,
Marcin Kaczkan,
Michał Malinowski
Abstract:
Ionoluminescence (IL) and photoluminescence (PL) of trivalent erbium ions (Er3+) in Gd2O3 nanopowder host activated with Bi3+ ions has been studied in order to establish the link between changes in luminescent spectra and temperature of the sample material. IL measurements have been performed with H2+ 100 keV ion beam bombarding the target material for a few seconds, while PL spectra have been col…
▽ More
Ionoluminescence (IL) and photoluminescence (PL) of trivalent erbium ions (Er3+) in Gd2O3 nanopowder host activated with Bi3+ ions has been studied in order to establish the link between changes in luminescent spectra and temperature of the sample material. IL measurements have been performed with H2+ 100 keV ion beam bombarding the target material for a few seconds, while PL spectra have been collected for temperatures ranging from 20 to 700°C. The PL data was used as a reference in determining the temperature corresponding to IL spectra. The collected data enabled the definition of empirical formula based on the Boltzmann distribution, which allows the temperature to be determined with a maximum sensitivity of 9.7 x 10-3 °C-1. The analysis of the Er3+ energy level structure in terms of tendency of the system to stay in thermal equilibrium, explained different behaviors of the lines intensities. This work led to the conclusion that temperature changes during ion excitation can be easily defined with separately collected PL spectra. The final result, which is empirical formula describing dependence of fluorescence intensity ratio on temperature, raises the idea of an application of method in temperature control, during processes like ion implantation and some nuclear applications.
△ Less
Submitted 27 June, 2016;
originally announced June 2016.
-
Measurement and comparison of individual external doses of high-school students living in Japan, France, Poland and Belarus -- the "D-shuttle" project --
Authors:
N. Adachi,
V. Adamovitch,
Y. Adjovi,
K. Aida,
H. Akamatsu,
S. Akiyama,
A. Akli,
A. Ando,
T. Andrault,
H. Antonietti,
S. Anzai,
G. Arkoun,
C. Avenoso,
D. Ayrault,
M. Banasiewicz,
M. Banaśkiewicz,
L. Bernandini,
E. Bernard,
E. Berthet,
M. Blanchard,
D. Boreyko,
K. Boros,
S. Charron,
P. Cornette,
K. Czerkas
, et al. (208 additional authors not shown)
Abstract:
Twelve high schools in Japan (of which six are in Fukushima Prefecture), four in France, eight in Poland and two in Belarus cooperated in the measurement and comparison of individual external doses in 2014. In total 216 high-school students and teachers participated in the study. Each participant wore an electronic personal dosimeter "D-shuttle" for two weeks, and kept a journal of his/her whereab…
▽ More
Twelve high schools in Japan (of which six are in Fukushima Prefecture), four in France, eight in Poland and two in Belarus cooperated in the measurement and comparison of individual external doses in 2014. In total 216 high-school students and teachers participated in the study. Each participant wore an electronic personal dosimeter "D-shuttle" for two weeks, and kept a journal of his/her whereabouts and activities. The distributions of annual external doses estimated for each region overlap with each other, demonstrating that the personal external individual doses in locations where residence is currently allowed in Fukushima Prefecture and in Belarus are well within the range of estimated annual doses due to the background radiation level of other regions/countries.
△ Less
Submitted 18 November, 2015; v1 submitted 21 June, 2015;
originally announced June 2015.
-
On using the Microsoft Kinect$^{\rm TM}$ sensors to determine the lengths of the arm and leg bones of a human subject in motion
Authors:
M. J. Malinowski,
E. Matsinos
Abstract:
The present study is part of a broader programme, exploring the possibility of involving the Microsoft Kinect$^{\rm TM}$ sensor in the analysis of human motion. We examine the output obtained from the two available versions of this sensor in relation to the variability of the estimates of the lengths of eight bones belonging to the subject's extremities: of the humerus (upper arm), ulna (lower arm…
▽ More
The present study is part of a broader programme, exploring the possibility of involving the Microsoft Kinect$^{\rm TM}$ sensor in the analysis of human motion. We examine the output obtained from the two available versions of this sensor in relation to the variability of the estimates of the lengths of eight bones belonging to the subject's extremities: of the humerus (upper arm), ulna (lower arm, forearm), femur (upper leg), and tibia (lower leg, shank). Large systematic effects in the output of the two sensors have been observed.
△ Less
Submitted 2 May, 2015;
originally announced May 2015.
-
Comparative study of the two versions of the Microsoft Kinect$^{\rm TM}$ sensor in regard to the analysis of human motion
Authors:
M. J. Malinowski,
E. Matsinos
Abstract:
The present paper is part of a broader programme, exploring the possibility of involving the Microsoft Kinect$^{\rm TM}$ sensor in the analysis of human motion. In this study, the output obtained from the two available versions of this sensor is critically examined. We demonstrate that the two outputs differ in regard to the variation of the physical quantities involved in the modelling of the hum…
▽ More
The present paper is part of a broader programme, exploring the possibility of involving the Microsoft Kinect$^{\rm TM}$ sensor in the analysis of human motion. In this study, the output obtained from the two available versions of this sensor is critically examined. We demonstrate that the two outputs differ in regard to the variation of the physical quantities involved in the modelling of the human motion. As the original sensor has been found unsuitable for applications requiring high precision, the observed differences in the output of the two sensors call for the validation of the upgraded sensor on the basis of a marker-based system.
△ Less
Submitted 1 April, 2015;
originally announced April 2015.
-
On using the Microsoft Kinect$^{\rm TM}$ sensors in the analysis of human motion
Authors:
M. J. Malinowski,
E. Matsinos,
S. Roth
Abstract:
The present paper aims at providing the theoretical background required for investigating the use of the Microsoft Kinect$^{\rm TM}$ (`Kinect', for short) sensors (original and upgraded) in the analysis of human motion. Our methodology is developed in such a way that its application be easily adaptable to comparative studies of other systems used in capturing human-motion data. Our future plans in…
▽ More
The present paper aims at providing the theoretical background required for investigating the use of the Microsoft Kinect$^{\rm TM}$ (`Kinect', for short) sensors (original and upgraded) in the analysis of human motion. Our methodology is developed in such a way that its application be easily adaptable to comparative studies of other systems used in capturing human-motion data. Our future plans include the application of this methodology to two situations: first, in a comparative study of the performance of the two Kinect sensors; second, in pursuing their validation on the basis of comparisons with a marker-based system (MBS). One important feature in our approach is the transformation of the MBS output into Kinect-output format, thus enabling the analysis of the measurements, obtained from different systems, with the same software application, i.e., the one we use in the analysis of Kinect-captured data; one example of such a transformation, for one popular marker-placement scheme (`Plug-in Gait'), is detailed. We propose that the similarity of the output, obtained from the different systems, be assessed on the basis of the comparison of a number of waveforms, representing the variation within the gait cycle of quantities which are commonly used in the modelling of the human motion. The data acquisition may involve commercially-available treadmills and a number of velocity settings: for instance, walking-motion data may be acquired at $5$ km/h, running-motion data at $8$ and $11$ km/h. We recommend that particular attention be called to systematic effects associated with the subject's knee and lower leg, as well as to the ability of the Kinect sensors in reliably capturing the details in the asymmetry of the motion for the left and right parts of the human body. The previous versions of the study have been withdrawn due to the use of a non-representative database.
△ Less
Submitted 27 May, 2015; v1 submitted 4 December, 2014;
originally announced December 2014.
