-
Apparatus for the measurement of birefringence maps of optical materials: the case of crystalline silicon for Einstein Telescope
Authors:
Alina Mariana Soflau,
Federico Della Valle,
Francesco Cescato,
Giovanni Di Domenico,
Aurélie Mailliet,
Lorenzo Malagutti,
Emilio Mariotti,
Andrea Mazzolari,
Marco Romagnoni,
Guido Zavattini
Abstract:
Einstein Telescope (ET) is expected to achieve sensitivity improvements exceeding an order of magnitude compared to current gravitational-wave detectors. The rigorous characterization in optical birefringence of materials and coatings has become a critical task for next-generation detectors, especially since this birefringence is generally spatially non-uniform. A highly sensitive optical polarime…
▽ More
Einstein Telescope (ET) is expected to achieve sensitivity improvements exceeding an order of magnitude compared to current gravitational-wave detectors. The rigorous characterization in optical birefringence of materials and coatings has become a critical task for next-generation detectors, especially since this birefringence is generally spatially non-uniform. A highly sensitive optical polarimeter has been developed at the Department of Physics and Earth Sciences of the University of Ferrara and INFN - Ferrara Section, Italy, aimed at performing two-dimensional birefringence mapping of substrates. In this paper we describe the design and working principle of the system and present results for crystalline silicon, a candidate material for substrates in the low-frequency (LF) interferometers of ET. We find that the birefringence is of order $10^{-7}$ for commercially available samples and is position dependent in the silicon (100)-oriented samples, with variations in both magnitude and axis orientation. We also measure the intrinsic birefringence of the (110) surface. Implications for the performance of gravitational-wave interferometers are discussed.
△ Less
Submitted 11 June, 2025;
originally announced June 2025.
-
Performance of short and long bent crystals for the TWOCRYST experiment at the Large Hadron Collider
Authors:
L. Bandiera,
R. Cai,
S. Carsi,
S. Cesare,
K. A. Dewhurst,
M. D'Andrea,
D. De Salvador,
P. Gandini,
V. Guidi,
P. Hermes,
G. Lezzani,
L. Malagutti,
D. Marangotto,
C. Maccani,
A. Mazzolari,
A. Merli,
D. Mirarchi,
P. Monti-Guarnieri,
C. E. Montanari,
R. Negrello,
N. Neri,
M. Prest,
S. Redaelli,
M. Romagnoni,
A. Selmi
, et al. (5 additional authors not shown)
Abstract:
This study investigates the performance of bent silicon crystals intended to channel hadrons in a fixed-target experiment at the Large Hadron Collider (LHC). The phenomenon of planar channelling in bent crystals enables extremely high effective bending fields for positively charged hadrons within compact volumes. Particles trapped in the potential well of high-purity, ordered atomic lattices follo…
▽ More
This study investigates the performance of bent silicon crystals intended to channel hadrons in a fixed-target experiment at the Large Hadron Collider (LHC). The phenomenon of planar channelling in bent crystals enables extremely high effective bending fields for positively charged hadrons within compact volumes. Particles trapped in the potential well of high-purity, ordered atomic lattices follow the mechanical curvature of the crystal, resulting in macroscopic deflections. Although the bend angle remains constant across different momenta (i.e., the phenomenon is non-dispersive), the channelling acceptance and efficiency still depend on the particle momentum.
Crystals with lengths from 5 cm to 10 cm, bent to angles between 5 mrad and 15 mrad, are under consideration for measurements of the electric and magnetic dipole moments of short-lived charmed baryons, such as the Lambda_c^+. Such large deflection angles over short distances cannot be achieved using conventional magnets.
The principle of inducing spin precession through bent crystals for magnetic dipole moment measurements was first demonstrated in the 1990s. Building on this concept, experimental layouts are now being explored at the LHC. The feasibility of such measurements depends, among other factors, on the availability of crystals with the mechanical properties required to achieve the necessary channelling performance. To address this, a dedicated machine experiment, TWOCRYST, has been installed in the LHC to carry out beam tests in the TeV energy range. The bent crystals for TWOCRYST were fabricated and tested using X-ray diffraction and high-momentum hadron beams at 180 GeV/c at the CERN SPS. This paper presents an analysis of the performance of these newly developed crystals, as characterised by these measurements.
△ Less
Submitted 20 May, 2025;
originally announced May 2025.
-
High-Precision Alignment Techniques for Realizing an Ultracompact Electromagnetic Calorimeters Using Oriented high-Z Scintillator Crystals
Authors:
Lorenzo Malagutti,
Alessia Selmi,
Laura Bandiera,
Vladimir Baryshevsky,
Luca Bomben,
Nicola Canale,
Stefano Carsib,
Mattia Ciliberti,
Davide De Salvadore,
Vincenzo Guidi,
Viktar Haurylavets,
Mikhail Korjik,
Giulia Lezzani,
Alexander Lobko,
Sofia Mangiacavalli,
Andrea Mazzolari,
Pietro Monti-Guarnieri,
Matthew Moulson,
Riccardo Negrelloa,
Gianfranco Paternò,
Leonardo Perna,
Christian Petroselli,
Michela Prest,
Marco Romagnoni,
Francesco Sgarbossa
, et al. (7 additional authors not shown)
Abstract:
Electromagnetic calorimeters used in high-energy physics and astrophysics rely heavily on high-Z inorganic scintillators, such as lead tungstate (PbWO4 or PWO). The crystalline structure and lattice orientation of inorganic scintillators are frequently underestimated in detector design, even though it is known that the crystalline lattice strongly modifies the features of the electromagnetic proce…
▽ More
Electromagnetic calorimeters used in high-energy physics and astrophysics rely heavily on high-Z inorganic scintillators, such as lead tungstate (PbWO4 or PWO). The crystalline structure and lattice orientation of inorganic scintillators are frequently underestimated in detector design, even though it is known that the crystalline lattice strongly modifies the features of the electromagnetic processes inside the crystal. A novel method has been developed for precisely bonding PWO crystals with aligned atomic planes within 100 μrad, exploiting X-ray diffraction (XRD) to accurately measure miscut angles. This method demonstrates the possibility to align a layer of crystals along the same crystallographic direction, opening a new technological path towards the development of next-generation electromagnetic calorimeters.
△ Less
Submitted 21 March, 2025;
originally announced March 2025.
-
Coherent radiation in axially oriented industrial-grade tungsten crystals: A viable path for an innovative γ-rays and positron sources
Authors:
N. Canale,
M. Romagnoni,
A. Sytov,
F. Alharthi,
S. Bertelli,
S. Carsi,
I. Chaikovska,
R. Chehab,
D. De Salvador,
P. Fedeli,
V. Guidi,
V. Haurylavets,
G. Lezzani,
L. Malagutti,
S. Mangiacavalli,
A. Mazzolari,
P. Monti-Guarnieri,
R. Negrello,
G. Paternò,
L. Perna,
L. Bandiera
Abstract:
It is known that the alignment of an high-energy e- beam with specific crystal directions leads to a significant increase of the coherent radiation emission. This enhancement can be exploited to create an intense photon source. An elective application is an innovative positron source design for future lepton colliders. Such scheme takes advantage of lattice coherent effects by employing a high-Z c…
▽ More
It is known that the alignment of an high-energy e- beam with specific crystal directions leads to a significant increase of the coherent radiation emission. This enhancement can be exploited to create an intense photon source. An elective application is an innovative positron source design for future lepton colliders. Such scheme takes advantage of lattice coherent effects by employing a high-Z crystalline radiator, followed by an amorphous metallic converter, to generate positrons via a two-step electromagnetic process. Additional applications can be in neutron production through photo-transmutation and radionuclide generation via photo-nuclear reactions. In this work, we present experimental results obtained from beam tests at CERN's PS facility using commercial industrial-grade tungsten crystals. The obtained results demonstrate the robust performance of industrial-grade radiators, even with their inherent imperfections, suggesting that it is possible to simplify the supply process and it is not strictly necessary to rely on highly specialized research infrastructures.
△ Less
Submitted 20 March, 2025;
originally announced March 2025.
-
FCC-ee positron source from conventional to crystal-based
Authors:
Fahad Alharthi,
Iryna Chaikovska,
Robert Chehab,
Viktor Mytrochenko,
Yuting Wang,
Yongke Zhao,
Laura Bandiera,
Nicola Canale,
Vincenzo Guidi,
Lorenzo Malagutti,
Andrea Mazzolari,
Riccardo Negrello,
Ginafranco Paternò,
Marco Romagnoni,
Alexei Sytov,
Daniele Boccanfuso,
Alberto Orso Maria Iorio,
Susanna Bertelli,
Mattia Soldani
Abstract:
The high-luminosity requirement in future lepton colliders imposes a need for a high-intensity positron source. In the conventional scheme, positron beams are obtained by the conversion of bremsstrahlung photons into electron-positron pairs through the interaction between a high-energy electron beam and a high-Z amorphous target. One method to enhance the number of produced positrons is by boostin…
▽ More
The high-luminosity requirement in future lepton colliders imposes a need for a high-intensity positron source. In the conventional scheme, positron beams are obtained by the conversion of bremsstrahlung photons into electron-positron pairs through the interaction between a high-energy electron beam and a high-Z amorphous target. One method to enhance the number of produced positrons is by boosting the incident electron beam power. However, the maximum heat load and thermo-mechanical stresses bearable by the target severely limit the beam power of the incident electrons. To overcome these limitations, an innovative approach using lattice coherent effects in oriented crystals appears promising. This approach uses a single thick crystal that serves as a radiator and a converter. In this paper, we investigate the application of this scheme as an alternative to the conventional positron source at the Future Circular Collider (FCC-ee). Simulations were carried out from the positron production stage to the entrance of the damping ring to estimate the accepted positron yield. The results demonstrate the advantages of the crystal-based positron source: it requires thinner targets than the conventional scheme, resulting in a 14% reduction in the deposited power while achieving a 10% increase in accepted positron yield.
△ Less
Submitted 10 February, 2025;
originally announced February 2025.
-
Observation of Fine Structure in Channeling of Particles in Bent Crystals
Authors:
A. Mazzolari,
H. Backe,
L. Bandiera,
N. Canale,
D. De Salvador,
P. Drexler,
V. Guidi,
P. Klag,
W. Lauth,
L. Malagutti,
R. Negrello,
G. Paternò,
M. Romagnoni,
F. Sgarbossa,
A. Sytov,
V. Tikhomirov,
D. Valzani
Abstract:
Using the newly developed 530 MeV positron beam from the Mainz Microtron MAMI and employing a bent silicon crystal, we demonstrate the first successful manipulation with high efficiencies of the trajectories of positrons through planar channeling and volume reflection. This uncovered the presence of fine structure within the angular distribution of charged particles when they are channeled between…
▽ More
Using the newly developed 530 MeV positron beam from the Mainz Microtron MAMI and employing a bent silicon crystal, we demonstrate the first successful manipulation with high efficiencies of the trajectories of positrons through planar channeling and volume reflection. This uncovered the presence of fine structure within the angular distribution of charged particles when they are channeled between the planes of bent crystals. The alignment of our experimental findings with simulation results not only demonstrates a deeper understanding of the interactions between charged particle beams and bent crystals but also signals a new phase in the development of innovative methodologies for slow extraction in circular accelerators operating in the GeV range, with implications for worldwide accelerators. Our results also mark a considerable progression in the generation of advanced x-ray sources through the channeling process in periodically bent crystals, rooted in a comprehensive understanding of the interactions between positron beams and such crystals.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
