-
Designing an ultra negative dispersion Photonic Crystal Fiber (PCFs) with square lattice geometry
Authors:
Partha Sona Maji,
Partha Roy Chaudhuri
Abstract:
In this article we have theoretically investigated the dispersion characteristics of dual-core PCF, based on square-lattice geometry by varying different parameters. The fiber exhibits a very large negative dispersion because of rapid slope change of the refractive indices at the coupling wavelength between the inner core and outer core. The dependence of different geometrical parameters namely ho…
▽ More
In this article we have theoretically investigated the dispersion characteristics of dual-core PCF, based on square-lattice geometry by varying different parameters. The fiber exhibits a very large negative dispersion because of rapid slope change of the refractive indices at the coupling wavelength between the inner core and outer core. The dependence of different geometrical parameters namely hole-to-hole spacing (pitch) and different air-hole diameter (d) was investigated in detail. By proper adjustment of the available parameters, a high negative dispersion value of -47,500 ps/nm/km has been achieved around the wavelength of 1550nm. Our proposed fiber will be an excellent device for dispersion compensation in long-haul data transmission as being thousand times more than the available DCFs.
△ Less
Submitted 31 December, 2014;
originally announced January 2015.
-
Geometrical parameters dependence towards ultra-flat dispersion square-lattice PCF with selective liquid infiltration
Authors:
Partha Sona Maji,
Partha Roy Chaudhuri
Abstract:
We have performed a numerical analysis of the structural dependence of the PCF parameters towards ultra-flat dispersion in the C-band of communication wavelength. The technique is based on regular square-lattice PCF with all the air-hole of same uniform diameter and the effective size of the air-holes are modified with a selective infiltration of the air-holes with liquids. The dependence of the P…
▽ More
We have performed a numerical analysis of the structural dependence of the PCF parameters towards ultra-flat dispersion in the C-band of communication wavelength. The technique is based on regular square-lattice PCF with all the air-hole of same uniform diameter and the effective size of the air-holes are modified with a selective infiltration of the air-holes with liquids. The dependence of the PCF structural parameters namely air-hole diameter and hole-to-hole distance along with the infiltrating liquid has been investigated in details. It is shown that the infiltrating liquid has critical influence on both the slope and value of dispersion, while pitch only changes the dispersion value whereas air-hole diameter modifies the slope of the dispersion. Our numerical investigation establishes dispersion values as small as 0+-0.58ps/(nm-km) over a bandwidth of 622nm in the communication wavelength band (C-band). The proposed design study will be very helpful in high power applications like broadband smooth supercontinuum generation, ASE suppressed amplification etc.
△ Less
Submitted 30 December, 2014;
originally announced December 2014.
-
A New Design of Ultra-Flattened Near-zero Dispersion PCF Using Selectively Liquid Infiltration
Authors:
Partha Sona Maji,
Partha Roy Chaudhuri
Abstract:
The paper report new results of chromatic dispersion in Photonic Crystal Fibers (PCFs) through appropriate designing of index-guiding triangular-lattice structure devised, with a selective infiltration of only the first air-hole ring with index-matching liquid. Our proposed structure can be implemented for both ultra-low and ultra-flattened dispersion over a wide wavelength range. The dependence o…
▽ More
The paper report new results of chromatic dispersion in Photonic Crystal Fibers (PCFs) through appropriate designing of index-guiding triangular-lattice structure devised, with a selective infiltration of only the first air-hole ring with index-matching liquid. Our proposed structure can be implemented for both ultra-low and ultra-flattened dispersion over a wide wavelength range. The dependence of dispersion parameter of the PCF on infiltrating liquid indices, hole-to-hole distance and air-hole diameter are investigated in details. The result establishes the design to yield a dispersion of 0+-0.15ps/ (nm.km) in the communication wavelength band. We propose designs pertaining to infiltrating practical liquid for near-zero ultra-flat dispersion of D=0+-0.48ps/ (nm.km) achievable over a bandwidth of 276-492nm in the wavelength range of 1.26 μm to 1.80μm realization.
△ Less
Submitted 25 December, 2014;
originally announced December 2014.
-
Near-elliptic core triangular-lattice and square-lattice PCFs: a comparison of birefringence, cut-off and GVD characteristics towards fiber device application
Authors:
Partha Sona Maji,
Partha Roy Chaudhuri
Abstract:
In this work, detailed numerical analysis of the near-elliptic core index-guiding triangular-lattice and square-lattice photonic crystal fiber (PCFs) are reported for birefringence, single mode, cut-off behavior, group velocity dispersion and effective area properties. For the same relative values of d/P, triangular-lattice PCFs show higher birefringence whereas the square-lattice PCFs show a wide…
▽ More
In this work, detailed numerical analysis of the near-elliptic core index-guiding triangular-lattice and square-lattice photonic crystal fiber (PCFs) are reported for birefringence, single mode, cut-off behavior, group velocity dispersion and effective area properties. For the same relative values of d/P, triangular-lattice PCFs show higher birefringence whereas the square-lattice PCFs show a wider range of single-mode operation. Square-lattice PCF was found to be endlessly single-mode for higher air-filling fraction (d/P). Smaller lengths of triangular-lattice PCF are required for dispersion compensation whereas PCFs with square-lattice with nearer relative dispersion slope (RDS) can better compensate the broadband dispersion. Square-lattice PCFs show ZDW red-shifted, making it preferable for mid-IR supercontinuum generation (SCG) with highly non-linear chalcogenide material. Square-lattice PCFs show higher dispersion slope that leads to compression of the broadband, thus accumulating more power in the pulse. On the other hand, triangular-lattice PCF with flat dispersion profile can generate broader SCG. Square-lattice PCF with low Group Velocity Dispersion (GVD) at the anomalous dispersion corresponds to higher dispersion length and higher degree of solitonic interaction. The effective area of square-lattice PCF is always greater than its triangular-lattice counterpart making it better suited for high power applications. Smaller length of symmetric-core PCF for dispersion compensation, while broadband dispersion compensation can be better performed with asymmetric-core PCF. Mid-Infrared SCG can be better performed with asymmetric-core PCF with compressed and high power pulse, while wider range of SCG can be performed with symmetric core PCF. Thus, this study will be extremely useful for realizing fiber towards a custom application around these characteristics.
△ Less
Submitted 24 December, 2014;
originally announced December 2014.
-
ASE suppression in Er3+ doped dual-core triangular lattice Photonic Crystal Fibers (PCFs) for communication wavelength
Authors:
Partha Sona Maji,
Partha Roy Chaudhuri
Abstract:
In this article, silica based triangular lattice PCF has been investigated towards both narrowband and broadband dispersion compensation for application in the communication wavelength. A dual core structure is obtained by introducing two different air-hole diameters in the cladding of the PCF. Dependence of individual structural parameters towards high negative dispersion (both narrowband and bro…
▽ More
In this article, silica based triangular lattice PCF has been investigated towards both narrowband and broadband dispersion compensation for application in the communication wavelength. A dual core structure is obtained by introducing two different air-hole diameters in the cladding of the PCF. Dependence of individual structural parameters towards high negative dispersion (both narrowband and broadband) has been investigated in details with multipole mode based solver. The numerical investigation exhibits narrowband of very large negative dispersion of -37,300 ps/nm/km around the wavelength of 1550 nm. Present investigation also reports broadband dispersion values varying from -800 ps/nm/km to -2600 ps/nm/km over a 200 nm wavelength (1400 nm to 1600 nm) range, and kappa values near 300 nm, which matches well with standard single mode fiber. Using the principle of power transfer from the inner core to the outer core after the coupling wavelength, we have investigated possible design of ASE suppressed amplifier in which wavelengths after the coupling wavelength cannot be amplified as most of the power tunnel to the outer core, where doped ion does not exist.
△ Less
Submitted 17 December, 2014;
originally announced December 2014.
