-
On-Chip Stimulated Brillouin Scattering via Surface Acoustic Waves
Authors:
Govert Neijts,
Choon Kong Lai,
Maren Kramer Riseng,
Duk-Yong Choi,
Kunlun Yan,
David Marpaung,
Stephen J. Madden,
Benjamin J. Eggleton,
Moritz Merklein
Abstract:
Surface acoustic wave (SAW) devices are ubiquitously used for signal processing and filtering, as well as mechanical, chemical and biological sensing, and show promise as quantum transducers. However, nowadays most SAWs are excited and driven via electromechanical coupling and interdigital transducers (IDTs), limiting operation bandwidth and flexibility. Novel ways to coherently excite and detect…
▽ More
Surface acoustic wave (SAW) devices are ubiquitously used for signal processing and filtering, as well as mechanical, chemical and biological sensing, and show promise as quantum transducers. However, nowadays most SAWs are excited and driven via electromechanical coupling and interdigital transducers (IDTs), limiting operation bandwidth and flexibility. Novel ways to coherently excite and detect SAWs all-optically interfaced with photonic integrated circuits are yet elusive. Backward Stimulated Brillouin scattering (SBS) provides strong coherent interactions between optical and acoustic waves in chip-scale waveguides, however, demonstrations have been limited to single longitudinal waves in the waveguide core. Here, we numerically model and experimentally demonstrate surface acoustic wave stimulated Brillouin scattering (SAW-SBS) on a photonic chip. We designed and fabricated tailored waveguides made out of GeAsSe glass that show good overlap between SAWs at 3.81 GHz and guided optical modes, without requiring a top cladding. We measure a 225 W$^{-1}$m$^{-1}$ Brillouin gain coefficient of the surface acoustic resonance and linewidth narrowing to 40 MHz. Experimentally accessing this new regime of stimulated Brillouin scattering opens the door for novel on-chip sensing and signal processing applications, strong Brillouin interactions in materials that do not provide sufficient acoustic guidance in the waveguide core as well as excitation of surface acoustic waves in non-piezoelectric materials.
△ Less
Submitted 2 October, 2023;
originally announced October 2023.
-
Optimizing performance for on-chip SBS-based isolator
Authors:
Choon Kong Lai,
Moritz Merklein,
Alvaro Casas Bedoya,
Yang Liu,
Stephen J. Madden,
Christopher G. Poulton,
Michael J. Steel,
Benjamin J. Eggleton
Abstract:
Non-reciprocal optical components such as isolators and circulators are crucial for preventing catastrophic back-reflection and controlling optical crosstalk in photonic systems. While non-reciprocal devices based on Brillouin intermodal transitions have been experimentally demonstrated in chip-scale platforms, harnessing such interactions has required a suspended waveguide structure, which is cha…
▽ More
Non-reciprocal optical components such as isolators and circulators are crucial for preventing catastrophic back-reflection and controlling optical crosstalk in photonic systems. While non-reciprocal devices based on Brillouin intermodal transitions have been experimentally demonstrated in chip-scale platforms, harnessing such interactions has required a suspended waveguide structure, which is challenging to fabricate and is potentially less robust than a non-suspended structure, thereby limiting the design flexibility. In this paper, we numerically investigate the performance of a Brillouin-based isolation scheme in which a dual-pump-driven optoacoustic interaction is used to excite confined acoustic waves in a traditional ridge waveguide. We find that acoustic confinement, and therefore the amount of Brillouin-driven mode conversion, can be enhanced by selecting an appropriate optical mode pair and waveguide geometry of two arsenic based chalcogenide platforms. Further, we optimize the isolator design in its entirety, including the input couplers, mode filters, the Brillouin-active waveguide as well as the device fabrication tolerances. We predict such a device can achieve 30 dB isolation over a 38 nm bandwidth when 500 mW pump power is used; in the presence of a +/- 10 nm fabrication-induced width error, such isolation can be maintained over a 5-10 nm bandwidth.
△ Less
Submitted 25 December, 2022;
originally announced December 2022.
-
Ready Student One: Exploring the predictors of student learning in virtual reality
Authors:
J. Madden,
S. Pandita,
J. P. Schuldt,
B. Kim,
A. S. Won,
N. G. Holmes
Abstract:
Immersive virtual reality (VR) has enormous potential for education, but classroom resources are limited. Thus, it is important to identify whether and when VR provides sufficient advantages over other modes of learning to justify its deployment. In a between-subjects experiment, we compared three methods of teaching Moon phases (a hands-on activity, VR, and a desktop simulation) and measured stud…
▽ More
Immersive virtual reality (VR) has enormous potential for education, but classroom resources are limited. Thus, it is important to identify whether and when VR provides sufficient advantages over other modes of learning to justify its deployment. In a between-subjects experiment, we compared three methods of teaching Moon phases (a hands-on activity, VR, and a desktop simulation) and measured student improvement on existing learning and attitudinal measures. While a substantial majority of students preferred the VR experience, we found no significant differences in learning between conditions. However, we found differences between conditions based on gender, which was highly correlated with experience with video games. These differences may indicate certain groups have an advantage in the VR setting.
△ Less
Submitted 14 May, 2020; v1 submitted 24 October, 2019;
originally announced October 2019.
-
Coherently refreshed acoustic phonons for extended light storage
Authors:
Birgit Stiller,
Moritz Merklein,
Christian Wolff,
Khu Vu,
Pan Ma,
Stephen J. Madden,
Benjamin J. Eggleton
Abstract:
Acoustic waves can serve as memory for optical information, however, acoustic phonons in the GHz regime decay on the nanosecond timescale. Usually this is dominated by intrinsic acoustic loss due to inelastic scattering of the acoustic waves and thermal phonons. Here we show a way to counteract the intrinsic acoustic decay of the phonons in a waveguide by resonantly reinforcing the acoustic wave v…
▽ More
Acoustic waves can serve as memory for optical information, however, acoustic phonons in the GHz regime decay on the nanosecond timescale. Usually this is dominated by intrinsic acoustic loss due to inelastic scattering of the acoustic waves and thermal phonons. Here we show a way to counteract the intrinsic acoustic decay of the phonons in a waveguide by resonantly reinforcing the acoustic wave via synchronized optical pulses. This scheme overcomes the previous constraints of phonon-based optical signal processing for light storage and memory. We experimentally demonstrate on-chip storage up to 40 ns, four times the intrinsic acoustic lifetime in the waveguide. We confirm the coherence of the scheme by detecting the phase of the delayed optical signal after 40 ns using homodyne detection. Through theoretical considerations we anticipate that this concept allows for storage times up to microseconds within realistic experimental limitations while maintaining a GHz bandwidth of the optical signal. The refreshed phonon-based light storage removes the usual bandwidth-delay product limitations of e.g. slow-light schemes.
△ Less
Submitted 30 April, 2019;
originally announced April 2019.
-
Implementing and constraining higher fidelity kinetics for DPAL models
Authors:
Hal J. Cambier,
Timothy J. Madden
Abstract:
Ionization, hydrocarbon breakdown, and other exotic processes can harm diode-pumped alkali laser (DPAL) performance and components. We develop a physical picture of these processes, including those that drive a non-Maxwell-Boltzmann distribution of electrons, and describe an efficient approach to solve these kinetics while resolving trace species, and enforcing conservation laws. Comparing the mod…
▽ More
Ionization, hydrocarbon breakdown, and other exotic processes can harm diode-pumped alkali laser (DPAL) performance and components. We develop a physical picture of these processes, including those that drive a non-Maxwell-Boltzmann distribution of electrons, and describe an efficient approach to solve these kinetics while resolving trace species, and enforcing conservation laws. Comparing the model to time-dependent experiments suggests that recombination and supporting processes are weaker than naïvely expected under relevant conditions, while methane seems to improve performance in the lab more than it does in the model. Overall, this work highlights the importance of tracking the true electron energy distribution, and how incisive experiments with time-dependent driving are. We also use the model to emphasize how ionization may pose more immediate heat loading problems in devices.
△ Less
Submitted 27 February, 2019;
originally announced February 2019.
-
On-chip correlation-based Brillouin sensing: design, experiment and simulation
Authors:
Atiyeh Zarifi,
Birgit Stiller,
Moritz Merklein,
Yang Liu,
Blair Morrison,
Alvaro Casas-Bedoya,
Gang Ren,
Thach G. Nguyen,
Khu Vu,
Duk-Yong Choi,
Arnan Mitchell,
Stephen J. Madden,
Benjamin J. Eggleton
Abstract:
Wavelength-scale SBS waveguides are enabling novel on-chip functionalities. The micro- and nano-scale SBS structures and the complexity of the SBS waveguides require a characterization technique to monitor the local geometry-dependent SBS responses along the waveguide. In this work, we experimentally demonstrate detection of longitudinal features down to 200$μ$m on a silicon-chalcogenide waveguide…
▽ More
Wavelength-scale SBS waveguides are enabling novel on-chip functionalities. The micro- and nano-scale SBS structures and the complexity of the SBS waveguides require a characterization technique to monitor the local geometry-dependent SBS responses along the waveguide. In this work, we experimentally demonstrate detection of longitudinal features down to 200$μ$m on a silicon-chalcogenide waveguide using the Brillouin optical correlation domain analysis (BOCDA) technique. We provide simulation and analysis on how multiple acoustic and optical modes and geometrical variations influence the Brillouin spectrum.
△ Less
Submitted 29 August, 2018;
originally announced September 2018.
-
Virtual Reality as a Teaching Tool for Moon Phases and Beyond
Authors:
J. H. Madden,
A. S. Won,
J. P. Schuldt,
B. Kim,
S. Pandita,
Y. Sun,
T. J. Stone,
N. G. Holmes
Abstract:
A ball on a stick is a common and simple activity for teaching the phases of the Moon. This activity, like many others in physics and astronomy, gives students a perspective they otherwise could only imagine. For Moon phases, a third person view and control over time allows students to rapidly build a mental model that connects all the moving parts. Computer simulations of many traditional physics…
▽ More
A ball on a stick is a common and simple activity for teaching the phases of the Moon. This activity, like many others in physics and astronomy, gives students a perspective they otherwise could only imagine. For Moon phases, a third person view and control over time allows students to rapidly build a mental model that connects all the moving parts. Computer simulations of many traditional physics and astronomy activities provide new features, controls, or vantage points to enhance learning beyond a hands-on activity. Virtual reality provides the capabilities of computer simulations and embodied cognition experiences through a hands-on activity making it a natural step to improve learning. We recreated the traditional ball-and-stick moon phases activity in virtual reality and compared participant learning using this simulation with using traditional methods. We found a strong participant preference for VR relative to the traditional methods. However, we observed no difference across conditions in average levels of performance on a pre/post knowledge test.
△ Less
Submitted 12 November, 2018; v1 submitted 30 July, 2018;
originally announced July 2018.
-
On-chip broadband non-reciprocal light storage
Authors:
Moritz Merklein,
Birgit Stiller,
Khu Vu,
Pan Ma,
Stephen J. Madden,
Benjamin J. Eggleton
Abstract:
Breaking the symmetry between forward and backward propagating optical modes is of fundamental scientific interest and enables crucial functionalities, such as isolators, circulators, and duplex communication systems. Whereas there has been progress in achieving optical isolation on-chip, integrated broadband non-reciprocal signal processing functionalities that enable transmitting and receiving v…
▽ More
Breaking the symmetry between forward and backward propagating optical modes is of fundamental scientific interest and enables crucial functionalities, such as isolators, circulators, and duplex communication systems. Whereas there has been progress in achieving optical isolation on-chip, integrated broadband non-reciprocal signal processing functionalities that enable transmitting and receiving via the same low-loss planar waveguide, without altering the frequency or mode of the signal, remain elusive. Here, we demonstrate a non-reciprocal delay scheme based on the uni-directional transfer of optical data pulses to acoustic waves in a chip-based integration platform. We experimentally demonstrate that this scheme is not impacted by simultaneously counter-propagating optical signals. Furthermore, we achieve a bandwidth more than an order of magnitude broader than the intrinsic opto-acoustic linewidth, linear operation for a wide range of signal powers, and importantly, show that this scheme is wavelength preserving and avoids complicated multi-mode structures..
△ Less
Submitted 5 August, 2020; v1 submitted 31 May, 2018;
originally announced June 2018.
-
Brillouin spectroscopy of a hybrid silicon-chalcogenide waveguide with geometrical variations
Authors:
Atiyeh Zarifi,
Birgit Stiller,
Moritz Merklein,
Yang Liu,
Blair Morrison,
Alvaro Casas-Bedoya,
Gang Ren,
Thach G. Nguyen,
Khu Vu,
Duk-Yong Choi,
Arnan Mitchell,
Stephen J. Madden,
Benjamin J. Eggleton
Abstract:
Recent advances in design and fabrication of photonic-phononic waveguides have enabled stimulated Brillouin scattering (SBS) in silicon-based platforms, such as under-etched silicon waveguides and hybrid waveguides. Due to the sophisticated design and more importantly high sensitivity of the Brillouin resonances to geometrical variations in micro- and nano-scale structures, it is necessary to have…
▽ More
Recent advances in design and fabrication of photonic-phononic waveguides have enabled stimulated Brillouin scattering (SBS) in silicon-based platforms, such as under-etched silicon waveguides and hybrid waveguides. Due to the sophisticated design and more importantly high sensitivity of the Brillouin resonances to geometrical variations in micro- and nano-scale structures, it is necessary to have access to the localized opto-acoustic response along those waveguides to monitor their uniformity and maximize their interaction strength. In this work, we design and fabricate photonic-phononic waveguides with a deliberate width variation on a hybrid silicon-chalcogenide photonic chip and confirm the effect of the geometrical variation on the localized Brillouin response using a distributed Brillouin measurement.
△ Less
Submitted 31 May, 2018;
originally announced June 2018.
-
On-chip multi-stage optical delay based on cascaded Brillouin light storage
Authors:
Birgit Stiller,
Moritz Merklein,
Christian Wolff,
Khu Vu,
Pan Ma,
Christopher G. Poulton,
Stephen J. Madden,
Benjamin J. Eggleton
Abstract:
Storing and delaying optical signals plays a crucial role in data centers, phased array antennas, communication and future computing architectures. Here, we show a delay scheme based on cascaded Brillouin light storage, that achieves multi-stage delay at arbitrary positions within a photonic integrated circuit. Importantly these multiple resonant transfers between the optical and acoustic domain a…
▽ More
Storing and delaying optical signals plays a crucial role in data centers, phased array antennas, communication and future computing architectures. Here, we show a delay scheme based on cascaded Brillouin light storage, that achieves multi-stage delay at arbitrary positions within a photonic integrated circuit. Importantly these multiple resonant transfers between the optical and acoustic domain are controlled solely via external optical control pulses, allowing cascading of the delay without the need of aligning multiple structural resonances along the optical circuit.
△ Less
Submitted 23 April, 2018;
originally announced April 2018.
-
Crosstalk-free multi-wavelength coherent light storage via Brillouin interaction
Authors:
Birgit Stiller,
Moritz Merklein,
Khu Vu,
Pan Ma,
Stephen J. Madden,
Christopher G. Poulton,
Benjamin J. Eggleton
Abstract:
Stimulated Brillouin scattering drives a coherent interaction between optical signals and acoustic phonons and this effect can be used for storing optical information in acoustic waves. An important consideration arises when multiple optical frequencies are simultaneously employed in the Brillouin process: in this case the acoustic phonons that are addressed by each optical wavelength can be separ…
▽ More
Stimulated Brillouin scattering drives a coherent interaction between optical signals and acoustic phonons and this effect can be used for storing optical information in acoustic waves. An important consideration arises when multiple optical frequencies are simultaneously employed in the Brillouin process: in this case the acoustic phonons that are addressed by each optical wavelength can be separated by frequencies far smaller than the acoustic phonon linewidth, potentially leading to crosstalk between the optical modes. Here we extend the concept of Brillouin-based light storage to multiple wavelength channels. We experimentally and theoretically show that the accumulated phase mismatch over the length of the spatially extended phonons allows each optical wavelength channel to address a distinct phonon mode, ensuring negligible crosstalk, even if the phonons overlap in frequency. Moreover, we demonstrate that the strict phase matching condition enables the preservation of the coherence of the opto-acoustic transfer at closely spaced multiple acoustic frequencies. This particular phase-mismatch for broad-bandwidth pulses has far-reaching implications allowing dense wavelength multiplexing in Brillouin-based light storage, multi-frequency Brillouin sensing, multi-wavelength Brillouin lasers, parallel microwave processing and quantum photon-phonon interactions.
△ Less
Submitted 4 October, 2018; v1 submitted 22 March, 2018;
originally announced March 2018.
-
Photonic mid-infrared nulling for exoplanet detection on a planar chalcogenide platform
Authors:
Harry-Dean Kenchington Goldsmith,
Michael J. Ireland,
Pan Ma,
Barry Luther-Davies,
Rongping Wang,
Barnaby Noris,
Peter Tuthill,
Stephen J. Madden
Abstract:
The future of exoplanet detection lies in the mid-infrared (MIR). The MIR region contains the blackbody peak of both hot and habitable zone exoplanets, making the contrast between starlight and planet light less extreme. It is also the region where prominent chemical signatures indicative of life exist, such as ozone at 9.7 microns. At a wavelength of 4 microns the difference in emission between a…
▽ More
The future of exoplanet detection lies in the mid-infrared (MIR). The MIR region contains the blackbody peak of both hot and habitable zone exoplanets, making the contrast between starlight and planet light less extreme. It is also the region where prominent chemical signatures indicative of life exist, such as ozone at 9.7 microns. At a wavelength of 4 microns the difference in emission between an Earth-like planet and a star like our own is 80 dB. However a jovian planet, at the same separation exhibits 60 dB of contrast, or only 20 dB if it is hot due to its formation energy or being close to its host star. A two dimensional nulling interferometer, made with chalcogenide glass, has been measured to produce a null of 20 dB, limited by scattered light. Measures to increase the null depth to the theoretical limit of 60 dB are discussed.
△ Less
Submitted 20 August, 2019; v1 submitted 16 February, 2018;
originally announced February 2018.
-
Microstructure analysis of bismuth absorbers for transition-edge sensor X-ray microcalorimeters
Authors:
Daikang Yan,
Ralu Divan,
Lisa M. Gades,
Peter Kenesei,
Timothy J. Madden,
Antonino Miceli,
Jun-Sang Park,
Umeshkumar M. Patel,
Orlando Quaranta,
Hemant Sharma,
Douglas A. Bennett,
William B. Doriese,
Joseph W. Fowler,
Johnathon Gard,
James Hays-Wehle,
Kelsey M. Morgan,
Daniel R. Schmidt,
Daniel S. Swetz,
Joel N. Ullom
Abstract:
Transition-edge sensors (TESs) as microcalorimeters offer high resolving power, owning to their sharp response and low operating temperature. In the hard X-ray regime and above, the demand for high quantum-efficiency requires the use of absorbers. Bismuth (Bi), owing to its low heat carrier density and high X-ray stopping power, has been widely used as an absorber material for TESs. However, disti…
▽ More
Transition-edge sensors (TESs) as microcalorimeters offer high resolving power, owning to their sharp response and low operating temperature. In the hard X-ray regime and above, the demand for high quantum-efficiency requires the use of absorbers. Bismuth (Bi), owing to its low heat carrier density and high X-ray stopping power, has been widely used as an absorber material for TESs. However, distinct spectral responses have been observed for Bi absorbers deposited via evaporation versus electroplating. Evaporated Bi absorbers are widely observed to have a non-Gaussian tail on the low energy side of measured spectra. In this study, we fabricated Bi absorbers via these two methods, and performed microstructure analysis using scanning electron microscopy (SEM) and X-ray diffraction microscopy. The two types of material showed the same crystallographic structure, but the grain size of the evaporated Bi was about 40 times smaller than that of the electroplated Bi. This distinction in grain size is likely to be the cause of their different spectral responses.
△ Less
Submitted 6 November, 2017;
originally announced November 2017.
-
Eliminating the non-Gaussian spectral response of X-ray absorbers for transition-edge sensors
Authors:
Daikang Yan,
Ralu Divan,
Lisa M. Gades,
Peter Kenesei,
Timothy J. Madden,
Antonino Miceli,
Jun-Sang Park,
Umeshkumar M. Patel,
Orlando Quaranta,
Hemant Sharma,
Douglas A. Bennett,
William B. Doriese,
Joseph W. Fowler,
Johnathon Gard,
James Hays-Wehle,
Kelsey M. Morgan,
Daniel R. Schmidt,
Daniel S. Swetz,
Joel N. Ullom
Abstract:
Transition-edge sensors (TES) as microcalorimeters for high-energy-resolution X-ray spectroscopy are often fabricated with an absorber made of materials with high Z (for X-ray stopping power) and low heat capacity (for high resolving power). Bismuth represents one of the most compelling options. TESs with evaporated bismuth absorbers have shown spectra with undesirable and unexplained low-energy t…
▽ More
Transition-edge sensors (TES) as microcalorimeters for high-energy-resolution X-ray spectroscopy are often fabricated with an absorber made of materials with high Z (for X-ray stopping power) and low heat capacity (for high resolving power). Bismuth represents one of the most compelling options. TESs with evaporated bismuth absorbers have shown spectra with undesirable and unexplained low-energy tails. We have developed TESs with electroplated bismuth absorbers over a gold layer that are not afflicted by this problem and that retain the other positive aspects of this material. To better understand these phenomena, we have studied a series of TESs with gold, gold/evaporated bismuth, and gold/electroplated bismuth absorbers, fabricated on the same die with identical thermal coupling. We show that bismuth morphology is linked to the spectral response of X-ray TES microcalorimeters.
△ Less
Submitted 28 August, 2017;
originally announced August 2017.
-
Highly localized Brillouin scattering response in a photonic integrated circuit
Authors:
Atiyeh Zarifi,
Birgit Stiller,
Moritz Merklein,
Neuton Li,
Khu Vu,
Duk-Yong Choi,
Pan Ma,
Stephen J. Madden,
Benjamin J. Eggleton
Abstract:
The interaction of optical and acoustic waves via stimulated Brillouin scattering (SBS) has recently reached on-chip platforms, which has opened new fields of applications ranging from integrated microwave photonics and on-chip narrow-linewidth lasers, to phonon-based optical delay and signal processing schemes. Since SBS is an effect that scales exponentially with interaction length, on-chip impl…
▽ More
The interaction of optical and acoustic waves via stimulated Brillouin scattering (SBS) has recently reached on-chip platforms, which has opened new fields of applications ranging from integrated microwave photonics and on-chip narrow-linewidth lasers, to phonon-based optical delay and signal processing schemes. Since SBS is an effect that scales exponentially with interaction length, on-chip implementation on a short length scale is challenging, requiring carefully designed waveguides with optimized opto-acoustic overlap. In this work, we use the principle of Brillouin optical correlation domain analysis (BOCDA) to locally measure the SBS spectrum with high spatial resolution of 800 μm and perform a distributed measurement of the Brillouin spectrum along a spiral waveguide in a photonic integrated circuit (PIC). This approach gives access to local opto-acoustic properties of the waveguides, including the Brillouin frequency shift (BFS) and linewidth, essential information for the further development of high quality photonic-phononic waveguides for SBS applications.
△ Less
Submitted 30 July, 2017;
originally announced July 2017.
-
High quality waveguides for the mid-infrared wavelength range in a silicon-on-sapphire platform
Authors:
Fangxin Li,
Stuart D. Jackson,
Christian Grillet,
Eric Magi,
Darren Hudson,
Steven J. Madden,
Yashodhan Moghe,
Christopher OBrien,
Andrew Read,
Steven G. Duvall,
Peter Atanackovic,
Benjamin J. Eggleton,
David J. Moss
Abstract:
We report record low loss silicon-on-sapphire nanowires for applications to mid infrared optics. We achieve propagation losses as low as 0.8dB/cm at 1550nm, 1.1 to 1.4dB/cm at 2080nm and < 2dB/cm at = 5.18 microns.
We report record low loss silicon-on-sapphire nanowires for applications to mid infrared optics. We achieve propagation losses as low as 0.8dB/cm at 1550nm, 1.1 to 1.4dB/cm at 2080nm and < 2dB/cm at = 5.18 microns.
△ Less
Submitted 29 May, 2017;
originally announced May 2017.
-
A chip-integrated coherent photonic-phononic memory
Authors:
Moritz Merklein,
Birgit Stiller,
Khu Vu,
Stephen J. Madden,
Benjamin J. Eggleton
Abstract:
Controlling and manipulating quanta of coherent acoustic vibrations - phonons - in integrated circuits has recently drawn a lot of attention, since phonons can function as unique links between radiofrequency and optical signals, allow access to quantum regimes and offer advanced signal processing capabilities. Recent approaches based on optomechanical resonators have achieved impressive quality fa…
▽ More
Controlling and manipulating quanta of coherent acoustic vibrations - phonons - in integrated circuits has recently drawn a lot of attention, since phonons can function as unique links between radiofrequency and optical signals, allow access to quantum regimes and offer advanced signal processing capabilities. Recent approaches based on optomechanical resonators have achieved impressive quality factors allowing for storage of optical signals. However, so far these techniques have been limited in bandwidth and are incompatible with multi-wavelength operation. In this work, we experimentally demonstrate a coherent buffer in an integrated planar optical waveguide by transferring the optical information coherently to an acoustic hypersound wave. Optical information is extracted using the reverse process. These hypersound phonons have similar wavelengths as the optical photons but travel at 5-orders of magnitude lower velocity. We demonstrate the storage of phase and amplitude of optical information with GHz-bandwidth and show operation at separate wavelengths with negligible cross-talk.
△ Less
Submitted 27 June, 2017; v1 submitted 31 August, 2016;
originally announced August 2016.
-
Chalcogenide glass planar MIR couplers for future chip based Bracewell interferometers
Authors:
Harry-Dean Kenchington Goldsmith,
Nick Cvetojevic,
Michael Ireland,
Pan Ma,
Peter Tuthill,
Ben Eggleton,
John S. Lawrence,
Sukanta Debbarma,
Barry Luther-Davies,
Stephen J. Madden
Abstract:
Photonic integrated circuits are established as the technique of choice for a number of astronomical processing functions due to their compactness, high level of integration, low losses, and stability. Temperature control, mechanical vibration and acoustic noise become controllable for such a device enabling much more complex processing than can realistically be considered with bulk optics. To dat…
▽ More
Photonic integrated circuits are established as the technique of choice for a number of astronomical processing functions due to their compactness, high level of integration, low losses, and stability. Temperature control, mechanical vibration and acoustic noise become controllable for such a device enabling much more complex processing than can realistically be considered with bulk optics. To date the benefits have mainly been at wavelengths around 1550 nm but in the important Mid-Infrared region, standard photonic chips absorb light strongly. Chalcogenide glasses are well known for their transparency to beyond 10000 nm, and the first results from coupler devices intended for use in an interferometric nuller for exoplanetary observation in the Mid-Infrared L band (3800-4200 nm) are presented here showing that suitable performance can be obtained both theoretically and experimentally for the first fabricated devices operating at 4000 nm.
△ Less
Submitted 15 August, 2016;
originally announced August 2016.
-
Application of Inverse Path Distance Weighting for high-density spatial mapping of coastal water quality patterns
Authors:
Joseph Stachelek,
Christopher J. Madden
Abstract:
One of the primary goals of coastal water quality monitoring is to characterize spatial variation. Generally, this monitoring takes place at a limited number of fixed sampling points. The alternative sampling methodology explored in this paper involves high density sampling from an onboard flow-through water analysis system (Dataflow). Dataflow has the potential to provide better spatial resolutio…
▽ More
One of the primary goals of coastal water quality monitoring is to characterize spatial variation. Generally, this monitoring takes place at a limited number of fixed sampling points. The alternative sampling methodology explored in this paper involves high density sampling from an onboard flow-through water analysis system (Dataflow). Dataflow has the potential to provide better spatial resolution of water quality features because it generates many closely spaced (< 10 m) measurements. Regardless of the measurement technique, parameter values at unsampled locations must be interpolated from nearby measurement points in order to generate a comprehensive picture of spatial variations. Standard Euclidean interpolations in coastal settings tend to yield inaccurate results because they extend through barriers in the landscape such as peninsulas, islands, and submerged banks. We recently developed a method for non-Euclidean interpolation by inverse path distance weighting (IPDW) in order to account for these barriers. The algorithms were implemented as part of an R package and made available from R repositories. The combination of IPDW with Dataflow provided more accurate estimates of salinity patterning relative to Euclidean inverse distance weighting (IDW). IPDW was notably more accurate than IDW in the presence of intense spatial gradients.
△ Less
Submitted 5 April, 2015;
originally announced April 2015.
-
Low power, chip-based stimulated Brillouin scattering microwave photonic filter with ultrahigh selectivity
Authors:
David Marpaung,
Blair Morrison,
Mattia Pagani,
Ravi Pant,
Duk-Yong Choi,
Barry Luther-Davies,
Steve J. Madden,
Benjamin J. Eggleton
Abstract:
Highly selective and reconfigurable microwave filters are of great importance in radio-frequency signal processing. Microwave photonic (MWP) filters are of particular interest, as they offer flexible reconfiguration and an order of magnitude higher frequency tuning range than electronic filters. However, all MWP filters to date have been limited by trade-offs between key parameters such as tuning…
▽ More
Highly selective and reconfigurable microwave filters are of great importance in radio-frequency signal processing. Microwave photonic (MWP) filters are of particular interest, as they offer flexible reconfiguration and an order of magnitude higher frequency tuning range than electronic filters. However, all MWP filters to date have been limited by trade-offs between key parameters such as tuning range, resolution, and suppression. This problem is exacerbated in the case of integrated MWP filters, blocking the path to compact, high performance filters. Here we show the first chip-based MWP band-stop filter with ultra-high suppression, high resolution in the MHz range, and 0-30 GHz frequency tuning. This record performance was achieved using an ultra-low Brillouin gain from a compact photonic chip and a novel approach of optical resonance-assisted RF signal cancellation. The results point to new ways of creating energy-efficient and reconfigurable integrated MWP signal processors for wireless communications and defence applications.
△ Less
Submitted 13 December, 2014;
originally announced December 2014.
-
A Vertical Architecture for Increasing Photogalvanic Solar Cell Efficiency: Theory and Modeling
Authors:
Mohammad Ali Mahmoudzadeh,
John D. W. Madden
Abstract:
Photogalvanic solar cells, the original dye based solar cell, have yet to fulfill their promise as a low fabrication cost, scalable energy conversion system. The efficient performance of photogalvanic cells relies on high dye solubility and selective electrodes with fast electron transfer kinetics. A new configuration is proposed for the photogalvanic cells that removes these impractical requireme…
▽ More
Photogalvanic solar cells, the original dye based solar cell, have yet to fulfill their promise as a low fabrication cost, scalable energy conversion system. The efficient performance of photogalvanic cells relies on high dye solubility and selective electrodes with fast electron transfer kinetics. A new configuration is proposed for the photogalvanic cells that removes these impractical requirements. Instead of illuminating the device through the electrode, as is the conventional approach, a new vertical configuration is employed with light coming between the two electrodes. This way, the light absorption and hence electron generation is spread through the depth of the device. As a result, unreasonably fast electrode kinetics are no longer required. The depth can be adjusted according to the concentration of the dyes, and thus deeper cells enable low solubility dyes to be employed. The proposed configuration is mathematically modeled and the advantages over the conventional cell are shown. A numerical model is built for more detailed analysis that gives practical guidelines for working towards device parameters with high power conversion efficiency. The analysis suggests that upon the realization of highly selective electrodes and an improved dye/mediator couple, an efficiency of 13% should be achievable from the new configuration.
△ Less
Submitted 15 September, 2014; v1 submitted 15 October, 2013;
originally announced October 2013.
-
Narrow linewidth Brillouin laser based on chalcogenide photonic chip
Authors:
Irina V. Kabakova,
Ravi Pant,
Duk-Yong Choi,
Sukhanta Debbarma,
Barry Luther-Davies,
Stephen J. Madden,
Benjamin J. Eggleton
Abstract:
We present the first demonstration of a narrow linewidth, waveguide-based Brillouin laser which is enabled by large Brillouin gain of a chalcogenide chip. The waveguides are equipped with vertical tapers for low loss coupling. Due to optical feedback for the Stokes wave, the lasing threshold is reduced to 360 mW, which is 5 times lower than the calculated single-pass Brillouin threshold for the sa…
▽ More
We present the first demonstration of a narrow linewidth, waveguide-based Brillouin laser which is enabled by large Brillouin gain of a chalcogenide chip. The waveguides are equipped with vertical tapers for low loss coupling. Due to optical feedback for the Stokes wave, the lasing threshold is reduced to 360 mW, which is 5 times lower than the calculated single-pass Brillouin threshold for the same waveguide. The slope efficiency of the laser is found to be 30% and the linewidth of 100 kHz is measured using a self-heterodyne method.
△ Less
Submitted 25 July, 2013;
originally announced July 2013.
-
Generation of correlated photon pairs in a chalcogenide As2S3 waveguide
Authors:
C. Xiong,
G. D. Marshall,
A. Peruzzo,
M. Lobino,
A. S. Clark,
D. -Y. Choi,
S. J. Madden,
C. M. Natarajan,
M. G. Tanner,
R. H. Hadfield,
S. N. Dorenbos,
T. Zijlstra,
V. Zwiller,
M. G. Thompson,
J. G. Rarity,
M. J. Steel,
B. Luther-Davies,
B. J. Eggleton,
J. L. O'Brien
Abstract:
We demonstrate the first 1550 nm correlated photon-pair source in an integrated glass platform-a chalcogenide As2S3 waveguide. A measured pair coincidence rate of 80 per second was achieved using 57 mW of continuous-wave pump. The coincidence to accidental ratio was shown to be limited by spontaneous Raman scattering effects that are expected to be mitigated by using a pulsed pump source.
We demonstrate the first 1550 nm correlated photon-pair source in an integrated glass platform-a chalcogenide As2S3 waveguide. A measured pair coincidence rate of 80 per second was achieved using 57 mW of continuous-wave pump. The coincidence to accidental ratio was shown to be limited by spontaneous Raman scattering effects that are expected to be mitigated by using a pulsed pump source.
△ Less
Submitted 7 November, 2010;
originally announced November 2010.
