-
Self Biased Integrated Magnonic Device
Authors:
Maria Cocconcelli,
Federico Maspero,
Andrea Micelli,
Alberto Toniato,
Andrea Del Giacco,
Nicola Pellizzi,
Alejandro Enrique Plaza,
Andrea Cattoni,
Marco Madami,
Raffaele Silvani,
Abbass Hamadeh,
Christoph Adelmann,
Philipp Pirro,
Silvia Tacchi,
Florin Ciubotaru,
Riccardo Bertacco
Abstract:
In the race towards "beyond 6G" telecommunication platforms, magnonics emerges as a promising solution due to its wide tunability within the FR3 band (7-24 GHz). So far, however, the need for an external magnetic bias field to allow the coherent excitation of spin waves has been a major bottleneck. Conventional bulky electromagnets are power-intensive and challenging to integrate on-chip, restrict…
▽ More
In the race towards "beyond 6G" telecommunication platforms, magnonics emerges as a promising solution due to its wide tunability within the FR3 band (7-24 GHz). So far, however, the need for an external magnetic bias field to allow the coherent excitation of spin waves has been a major bottleneck. Conventional bulky electromagnets are power-intensive and challenging to integrate on-chip, restricting magnonic applications largely to academic research. Here, we present the first demonstration of a standalone, tunable magnonic device featuring all-electric input and output, fully integrated on a silicon substrate with a compact footprint of 100 x 150 $μ$m. The device consists of a CoFeB waveguide equipped with two radio frequency antennas, flanked by a symmetric configuration of T-shaped magnetic flux concentrators and rectangular SmCo permanent micromagnets. By varying the distance D between the flux concentrators and the permanent magnets from 0 to 12 $μ$m, the transverse bias field can be tuned from 20.5 mT to 11 mT, respectively. This variation directly modulates the dispersion relation of Damon-Eshbach spin wave modes in the CoFeB waveguide. In these proof-of-concept devices, the spin wave frequency band ranges from 3 to 8 GHz, with precise phase shift tuning of up to 120 degrees at 6 GHz achieved by varying D within the 0-8 $μ$m range. The operational frequency band could even be pushed to higher frequencies through optimized micromagnet engineering.
△ Less
Submitted 5 February, 2025;
originally announced February 2025.
-
Tuning magnonic devices with on-chip permanent micromagnets
Authors:
Maria Cocconcelli,
Silvia Tacchi,
Róbert Erdélyi,
Federico Maspero,
Andrea Del Giacco,
Alejandro Plaza,
Oksana Koplak,
Andrea Cattoni,
Raffaele Silvani,
Marco Madami,
Ádam Papp,
Gyorgy Csaba,
Felix Kohl,
Björn Heinz,
Philipp Pirro,
Riccardo Bertacco
Abstract:
One of the most appealing features of magnonics is the easy tunability of spin-waves propagation via external magnetic fields. Usually this requires bulky and power-hungry electromagnets which are not compatible with device miniaturization. Here we propose a different approach, exploiting the stray field from permanent micromagnets integrated on the same chip of a magnonic wave-guide. In our monol…
▽ More
One of the most appealing features of magnonics is the easy tunability of spin-waves propagation via external magnetic fields. Usually this requires bulky and power-hungry electromagnets which are not compatible with device miniaturization. Here we propose a different approach, exploiting the stray field from permanent micromagnets integrated on the same chip of a magnonic wave-guide. In our monolithic device, we employ two SmCo square micromagnets (10x10 $μ$m$^2$) flanking a CoFeB conduit at different distances from its axis, to produce a tunable transverse bias field between 7.5 and 3.0 mT in the conduit region between the magnets. Spin waves excited by an antenna just outside the region between the magnets enter a region with a variable higher (lower) effective field when an external bias field is applied parallel (antiparallel) to that from the micromagnets. Consequently, the attenuation length and phase shift of Damon-Eshbach spin waves can be tuned in a wide range by playing with the parallel-antiparallel configuration of the external bias and the distance between SmCo micromagnets and the CoFeB conduit. This work demonstrates the potential of permanent micro-magnets for the realization of low-power, integrated magnonic devices with tunable functionalities.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
Laser patterning of magnonic structure via local crystallization of Yittrium Iron Garnet
Authors:
A. Del Giacco,
F. Maspero,
V. Levati,
M. Vitali,
E. Albisetti,
D. Petti,
L. Brambilla,
V. Polewczyk,
G. Vinai,
G. Panaccione,
R. Silvani,
M. Madami,
S. Tacchi,
R. Dreyer,
S. R. Lake,
G. Woltersdorf,
G. Schmidt,
Riccardo Bertacco
Abstract:
The fabrication and integration of high-quality structures of Yttrium Iron Garnet (YIG) is critical for magnonics.Films with excellent properties are obtained only on single crystal Gadolinium Gallium Garnet (GGG) substrates using high-temperature processes. The subsequent realization of magnonic structures via lithography and etching is not straightforward as it requires a tight control of the ed…
▽ More
The fabrication and integration of high-quality structures of Yttrium Iron Garnet (YIG) is critical for magnonics.Films with excellent properties are obtained only on single crystal Gadolinium Gallium Garnet (GGG) substrates using high-temperature processes. The subsequent realization of magnonic structures via lithography and etching is not straightforward as it requires a tight control of the edge roughness, to avoid magnon scattering, and planarization in case of multilayer devices. In this work we describe a different approach based on local laser annealing of amorphous YIG films, avoiding the need for subjecting the entire sample to high thermal budgets and for physical etching. Starting from amorphous and paramagnetic YIG films grown by pulsed laser deposition at room temperature on GGG, a 405 nm laser is used for patterning arbitrary shaped ferrimagnetic structures by local crystallization. In thick films (160 nm) the laser induced surface corrugation prevents the propagation of spin-wave modes in patterned conduits. For thinner films (80 nm) coherent propagation is observed in 1.2 micron wide conduits displaying an attenuation length of 5 micron which is compatible with a damping coefficient of about 5e-3. Possible routes to achieve damping coefficients compatible with state-of-the art epitaxial YIG films are discussed.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
Observation of spin-wave moiré edge and cavity modes in twisted magnetic lattices
Authors:
Hanchen Wang,
Marco Madami,
Jilei Chen,
Hao Jia,
Yu Zhang,
Rundong Yuan,
Yizhan Wang,
Wenqing He,
Lutong Sheng,
Yuelin Zhang,
Jinlong Wang,
Song Liu,
Ka Shen,
Guoqiang Yu,
Xiufeng Han,
Dapeng Yu,
Jean-Philippe Ansermet,
Gianluca Gubbiotti,
Haiming Yu
Abstract:
We report the experimental observation of the spin-wave moiré edge and cavity modes using Brillouin light scattering spectro-microscopy in a nanostructured magnetic moiré lattice consisting of two twisted triangle antidot lattices based on an yttrium iron garnet thin film. Spin-wave moiré edge modes are detected at an optimal twist angle and with a selective excitation frequency. At a given twist…
▽ More
We report the experimental observation of the spin-wave moiré edge and cavity modes using Brillouin light scattering spectro-microscopy in a nanostructured magnetic moiré lattice consisting of two twisted triangle antidot lattices based on an yttrium iron garnet thin film. Spin-wave moiré edge modes are detected at an optimal twist angle and with a selective excitation frequency. At a given twist angle, the magnetic field acts as an additional degree of freedom for tuning the chiral behavior of the magnon edge modes. Micromagnetic simulations indicate that the edge modes emerge within the original magnonic band gap and at the intersection between a mini-flatband and a propagation magnon branch. Our theoretical estimate for the Berry curvature of the magnon-magnon coupling suggests a non-trivial topology for the chiral edge modes and confirms the key role played by the dipolar interaction. Our findings shed light on the topological nature of the magnon edge mode for emergent moiré magnonics.
△ Less
Submitted 3 April, 2023;
originally announced April 2023.
-
Excitation of unidirectional exchange spin waves by a nanoscale magnetic grating
Authors:
Jilei Chen,
Tao Yu,
Chuanpu Liu,
Tao Liu,
Marco Madami,
Ka Shen,
Jianyu Zhang,
Sa Tu,
Md Shah Alam,
Ke Xia,
Mingzhong Wu,
Gianluca Gubbiotti,
Yaroslav M. Blanter,
Gerrit E. W. Bauer,
Haiming Yu
Abstract:
Magnon spintronics is a prosperous field that promises beyond-CMOS technology based on elementary excitations of the magnetic order that act as information carriers for future computational architectures. Unidirectional propagation of spin waves is key to the realization of magnonic logic devices. However, previous efforts to enhance the Damon-Eshbach-type nonreciprocity did not realize (let alone…
▽ More
Magnon spintronics is a prosperous field that promises beyond-CMOS technology based on elementary excitations of the magnetic order that act as information carriers for future computational architectures. Unidirectional propagation of spin waves is key to the realization of magnonic logic devices. However, previous efforts to enhance the Damon-Eshbach-type nonreciprocity did not realize (let alone control) purely unidirectional propagation. Here we experimentally demonstrate excitations of unidirectional exchange spin waves by a nanoscale magnetic grating consisting of Co nanowires fabricated on an ultrathin yttrium iron garnet film. We explain and model the nearly perfect unidirectional excitation by the chirality of the magneto-dipolar interactions between the Kittel mode of the nanowires and the exchange spin waves of the film. Reversal of the magnetic configurations of film and nanowire array from parallel to antiparallel changes the direction of the excited spin waves. Our results raise the prospect of a chiral magnonic logic without the need for fragile surface states.
△ Less
Submitted 2 March, 2019;
originally announced March 2019.
-
Micro-focused Brillouin light scattering study of the magnetization dynamics driven by Spin Hall effect in a transversely magnetized NiFe nanowire
Authors:
M. Madami,
G. Gubbiotti,
T. Moriyama,
K. Tanaka,
G. Siracusano,
M. Carpentieri,
G. Finocchio,
S. Tacchi,
T. Ono,
G. Carlotti
Abstract:
We employed micro-focused Brillouin light scattering to study the amplification of the thermal spin wave eigenmodes by means of a pure spin current, generated by the spin-Hall effect, in a transversely magnetized Pt(4nm)/NiFe(4nm)/SiO2(5nm) layered nanowire with lateral dimensions 500x2750 nm2. The frequency and the cross section of both the center (fundamental) and the edge spin wave modes have b…
▽ More
We employed micro-focused Brillouin light scattering to study the amplification of the thermal spin wave eigenmodes by means of a pure spin current, generated by the spin-Hall effect, in a transversely magnetized Pt(4nm)/NiFe(4nm)/SiO2(5nm) layered nanowire with lateral dimensions 500x2750 nm2. The frequency and the cross section of both the center (fundamental) and the edge spin wave modes have been measured as a function of the intensity of the injected dc electric current. The frequency of both modes exhibits a clear redshift while their cross section is greatly enhanced on increasing the intensity of the injected dc. A threshold-like behavior is observed for a value of the injected dc of 2.8 mA. Interestingly an additional mode, localized in the central part of the nanowire, appears at higher frequency on increasing the intensity of the injected dc above the threshold value. Micromagnetic simulations were used to quantitatively reproduce the experimental results and to investigate the complex non-linear dynamics induced by the spin-Hall effect, including the modification of the spatial profile of the spin wave modes and the appearance of the extra mode above the threshold.
△ Less
Submitted 24 March, 2015;
originally announced March 2015.
