Wide-range Angle-sensitive Plasmonic Color Printing on Lossy-Resonator Substrates
Authors:
Sarah N. Chowdhury,
Jeffrey Simon,
Michał P. Nowak,
Karthik Pagadala,
Piotr Nyga,
Colton Fruhling,
Esteban Garcia Bravo,
Sebastian Maćkowski,
Vladimir M. Shalaev,
Alexander V. Kildishev,
Alexandra Boltasseva
Abstract:
We demonstrate a sustainable, lithography-free process for generating non fading plasmonic colors with a prototype device that produces a wide range of vivid colors in red, green, and blue (RGB) ([0-1], [0-1], [0-1]) color space from violet (0.7, 0.72, 1) to blue (0.31, 0.80, 1) and from green (0.84, 1, 0.58) to orange (1, 0.58, 0.46). The proposed color-printing device architecture integrates a s…
▽ More
We demonstrate a sustainable, lithography-free process for generating non fading plasmonic colors with a prototype device that produces a wide range of vivid colors in red, green, and blue (RGB) ([0-1], [0-1], [0-1]) color space from violet (0.7, 0.72, 1) to blue (0.31, 0.80, 1) and from green (0.84, 1, 0.58) to orange (1, 0.58, 0.46). The proposed color-printing device architecture integrates a semi-transparent random metal film (RMF) with a metal back mirror to create a lossy asymmetric Fabry-Pérot resonator. This device geometry allows for advanced control of the observed color through the five-degree multiplexing (RGB color space, angle, and polarization sensitivity). An extended color palette is then obtained through photomodification process and localized heating of the RMF layer under various femtosecond laser illumination conditions at the wavelengths of 400 nm and 800 nm. Colorful design samples with total areas up to 10 mm2 and 100 μm resolution are printed on 300-nm-thick films to demonstrate macroscopic high-resolution color generation. The proposed printing approach can be extended to other applications including laser marking, anti-counterfeiting and chromo-encryption.
△ Less
Submitted 27 June, 2023;
originally announced June 2023.
Identifying and reducing interfacial losses to enhance color-pure electroluminescence in blue-emitting perovskite nanoplatelet light-emitting diodes
Authors:
Robert L. Z. Hoye,
May-Ling Lai,
Miguel Anaya,
Yu Tong,
Krzysztof Gałkowski,
Tiarnan Doherty,
Weiwei Li,
Tahmida N. Huq,
Sebastian Mackowski,
Lakshminarayana Polavarapu,
Jochen Feldmann,
Judith L. MacManus-Driscoll,
Richard H. Friend,
Alexander S. Urban,
Samuel D. Stranks
Abstract:
Perovskite nanoplatelets (NPls) hold great promise for light-emitting applications, having achieved high photoluminescence quantum efficiencies (PLQEs) approaching unity in the blue wavelength range, where other metal-halide perovskites have typically been ineffective. However, the external quantum efficiency (EQE) of blue-emitting NPl light-emitting diodes (LEDs) have only reached 0.12%, with typ…
▽ More
Perovskite nanoplatelets (NPls) hold great promise for light-emitting applications, having achieved high photoluminescence quantum efficiencies (PLQEs) approaching unity in the blue wavelength range, where other metal-halide perovskites have typically been ineffective. However, the external quantum efficiency (EQE) of blue-emitting NPl light-emitting diodes (LEDs) have only reached 0.12%, with typical values well below 0.1%. In this work, we show that the performance of NPl LEDs is primarily hindered by a poor electronic interface between the emitter and hole-injector. Through Kelvin Probe and X-ray photoemission spectroscopy measurements, we reveal that the NPls have remarkably deep ionization potentials (>=6.5 eV), leading to large barriers for hole injection, as well as substantial non-radiative decay at the interface between the emitter and hole-injector. We find that an effective way to reduce these non-radiative losses is by using poly(triarylamine) interlayers. This results in an increase in the EQE of our blue LEDs emitting at 464 nm wavelength to 0.3%. We find that our results can be generalized to thicker sky-blue-emitting NPls, where we increase the EQE to 0.55% using the poly(triarylamine) interlayer. Our work also identifies the key challenges for further efficiency increases.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
