-
Mechanical complexity of living cells can be mapped onto simple homogeneous equivalents
Authors:
Sebastian Wohlrab,
Sebastian J. Müller,
Stephan Gekle
Abstract:
Biological cells are built up from many different constituents of varying size and stiffness which all contribute to the cell's mechanical properties. Despite this heterogeneity, in the analysis of experimental measurements such as atomic force microscopy or microfluidic characterisation a strongly simplified homogeneous cell is typically assumed and a single elastic modulus is assigned to the ent…
▽ More
Biological cells are built up from many different constituents of varying size and stiffness which all contribute to the cell's mechanical properties. Despite this heterogeneity, in the analysis of experimental measurements such as atomic force microscopy or microfluidic characterisation a strongly simplified homogeneous cell is typically assumed and a single elastic modulus is assigned to the entire cell. This ad-hoc simplification has so far mostly been used without proper justification. Here, we use computer simulations to show that indeed a heterogeneous cell can effectively be replaced by a homogeneous equivalent cell with a volume averaged elastic modulus. To study the validity of this approach, we investigate a hyperelastic cell with a heterogeneous interior under compression as well as in shear and channel flow, mimicking atomic force and microfluidic measurements, respectively. We find that the homogeneous equivalent cell reproduces quantitatively the behavior of its inhomogeneous counterpart, and that this equality is largely independent of the stiffness or spatial distribution of the heterogeneity.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
Predicting cell stress and strain during extrusion bioprinting
Authors:
Sebastian Johannes Müller,
Ben Fabry,
Stephan Gekle
Abstract:
Bioprinting of living cells can cause major shape deformations, which may severely affect cell survival and functionality. While the shear stresses occurring during cell flow through the printer nozzle have been quantified to some extent, the extensional stresses occurring as cells leave the nozzle into the free printing strand have been mostly ignored. Here we use Lattice-Boltzmann simulations to…
▽ More
Bioprinting of living cells can cause major shape deformations, which may severely affect cell survival and functionality. While the shear stresses occurring during cell flow through the printer nozzle have been quantified to some extent, the extensional stresses occurring as cells leave the nozzle into the free printing strand have been mostly ignored. Here we use Lattice-Boltzmann simulations together with a finite-element based cell model to study cell deformation at the nozzle exit. Our simulation results are in good qualitative agreement with experimental microscopy images. We show that for cells flowing in the center of the nozzle extensional stresses can be significant, while for cells flowing off-center their deformation is dominated by the shear flow inside the nozzle. From the results of these simulations, we develop two simple methods that only require the printing parameters (nozzle diameter, flow rate, bioink rheology) to (i) accurately predict the maximum cell stress occurring during the 3D bioprinting process and (ii) approximately predict the cell strains caused by the elongational flow at the nozzle exit.
△ Less
Submitted 27 September, 2022;
originally announced September 2022.
-
A hyperelastic model for simulating cells in flow
Authors:
Sebastian J. Müller,
Franziska Weigl,
Carina Bezold,
Ana Sancho,
Christian Bächer,
Krystyna Albrecht,
Stephan Gekle
Abstract:
In the emerging field of 3D bioprinting, cell damage due to large deformations is considered a main cause for cell death and loss of functionality inside the printed construct. Those deformations, in turn, strongly depend on the mechano-elastic response of the cell to the hydrodynamic stresses experienced during printing. In this work, we present a numerical model to simulate the deformation of bi…
▽ More
In the emerging field of 3D bioprinting, cell damage due to large deformations is considered a main cause for cell death and loss of functionality inside the printed construct. Those deformations, in turn, strongly depend on the mechano-elastic response of the cell to the hydrodynamic stresses experienced during printing. In this work, we present a numerical model to simulate the deformation of biological cells in arbitrary three-dimensional flows. We consider cells as an elastic continuum according to the hyperelastic Mooney-Rivlin model. We then employ force calculations on a tetrahedralized volume mesh. To calibrate our model, we perform a series of FluidFM(R) compression experiments with REF52 cells demonstrating that all three parameters of the Mooney-Rivlin model are required for a good description of the experimental data at very large deformations up to 80%. In addition, we validate the model by comparing to previous AFM experiments on bovine endothelial cells and artificial hydrogel particles. To investigate cell deformation in flow, we incorporate our model into Lattice Boltzmann simulations via an Immersed-Boundary algorithm. In linear shear flows, our model shows excellent agreement with analytical calculations and previous simulation data.
△ Less
Submitted 18 December, 2020; v1 submitted 6 March, 2020;
originally announced March 2020.
