Showing 1–8 of 8 results for author: Lucero, E

Readout of a quantum processor with high dynamic range Josephson parametric amplifiers

Authors: T. C. White, Alex Opremcak, George Sterling, Alexander Korotkov, Daniel Sank, Rajeev Acharya, Markus Ansmann, Frank Arute, Kunal Arya, Joseph C. Bardin, Andreas Bengtsson, Alexandre Bourassa, Jenna Bovaird, Leon Brill, Bob B. Buckley, David A. Buell, Tim Burger, Brian Burkett, Nicholas Bushnell, Zijun Chen, Ben Chiaro, Josh Cogan, Roberto Collins, Alexander L. Crook, Ben Curtin , et al. (69 additional authors not shown)

Abstract: We demonstrate a high dynamic range Josephson parametric amplifier (JPA) in which the active nonlinear element is implemented using an array of rf-SQUIDs. The device is matched to the 50 $Ω$ environment with a Klopfenstein-taper impedance transformer and achieves a bandwidth of 250-300 MHz, with input saturation powers up to -95 dBm at 20 dB gain. A 54-qubit Sycamore processor was used to benchmar… ▽ More We demonstrate a high dynamic range Josephson parametric amplifier (JPA) in which the active nonlinear element is implemented using an array of rf-SQUIDs. The device is matched to the 50 $Ω$ environment with a Klopfenstein-taper impedance transformer and achieves a bandwidth of 250-300 MHz, with input saturation powers up to -95 dBm at 20 dB gain. A 54-qubit Sycamore processor was used to benchmark these devices, providing a calibration for readout power, an estimate of amplifier added noise, and a platform for comparison against standard impedance matched parametric amplifiers with a single dc-SQUID. We find that the high power rf-SQUID array design has no adverse effect on system noise, readout fidelity, or qubit dephasing, and we estimate an upper bound on amplifier added noise at 1.6 times the quantum limit. Lastly, amplifiers with this design show no degradation in readout fidelity due to gain compression, which can occur in multi-tone multiplexed readout with traditional JPAs. △ Less

Submitted 22 November, 2022; v1 submitted 16 September, 2022; originally announced September 2022.

Comments: 10 pages, 10 figures

Journal ref: Appl. Phys. Lett. 122, 014001 (2023)

Hartree-Fock on a superconducting qubit quantum computer

Authors: Frank Arute, Kunal Arya, Ryan Babbush, Dave Bacon, Joseph C. Bardin, Rami Barends, Sergio Boixo, Michael Broughton, Bob B. Buckley, David A. Buell, Brian Burkett, Nicholas Bushnell, Yu Chen, Zijun Chen, Benjamin Chiaro, Roberto Collins, William Courtney, Sean Demura, Andrew Dunsworth, Daniel Eppens, Edward Farhi, Austin Fowler, Brooks Foxen, Craig Gidney, Marissa Giustina , et al. (57 additional authors not shown)

Abstract: As the search continues for useful applications of noisy intermediate scale quantum devices, variational simulations of fermionic systems remain one of the most promising directions. Here, we perform a series of quantum simulations of chemistry the largest of which involved a dozen qubits, 78 two-qubit gates, and 114 one-qubit gates. We model the binding energy of ${\rm H}_6$, ${\rm H}_8$,… ▽ More As the search continues for useful applications of noisy intermediate scale quantum devices, variational simulations of fermionic systems remain one of the most promising directions. Here, we perform a series of quantum simulations of chemistry the largest of which involved a dozen qubits, 78 two-qubit gates, and 114 one-qubit gates. We model the binding energy of ${\rm H}_6$, ${\rm H}_8$, ${\rm H}_{10}$ and ${\rm H}_{12}$ chains as well as the isomerization of diazene. We also demonstrate error-mitigation strategies based on $N$-representability which dramatically improve the effective fidelity of our experiments. Our parameterized ansatz circuits realize the Givens rotation approach to non-interacting fermion evolution, which we variationally optimize to prepare the Hartree-Fock wavefunction. This ubiquitous algorithmic primitive corresponds to a rotation of the orbital basis and is required by many proposals for correlated simulations of molecules and Hubbard models. Because non-interacting fermion evolutions are classically tractable to simulate, yet still generate highly entangled states over the computational basis, we use these experiments to benchmark the performance of our hardware while establishing a foundation for scaling up more complex correlated quantum simulations of chemistry. △ Less

Submitted 18 September, 2020; v1 submitted 8 April, 2020; originally announced April 2020.

Comments: updated link to experiment code, new version containing expanded data sets and corrected figure label

Journal ref: Science 369 (6507), 1084-1089, 2020

Nonequilibrium Energy Transduction in Stochastic Strongly Coupled Rotary Motors

Authors: Emma Lathouwers, Joseph N. E. Lucero, David A. Sivak

Abstract: Living systems at the molecular scale are composed of many constituents with strong and heterogeneous interactions, operating far from equilibrium, and subject to strong fluctuations. These conditions pose significant challenges to efficient, precise, and rapid free energy transduction, yet nature has evolved numerous molecular machines that do just this. Using a simple model of the ingenious rota… ▽ More Living systems at the molecular scale are composed of many constituents with strong and heterogeneous interactions, operating far from equilibrium, and subject to strong fluctuations. These conditions pose significant challenges to efficient, precise, and rapid free energy transduction, yet nature has evolved numerous molecular machines that do just this. Using a simple model of the ingenious rotary machine FoF1-ATP synthase, we investigate the interplay between nonequilibrium driving forces, thermal fluctuations, and interactions between strongly coupled subsystems. This model reveals design principles for effective free energy transduction. Most notably, while tight coupling is intuitively appealing, we find that output power is maximized at intermediate-strength coupling, which permits lubrication by stochastic fluctuations with only minimal slippage. △ Less

Submitted 26 June, 2020; v1 submitted 3 April, 2020; originally announced April 2020.

Comments: 17 pages, 12 figures. J. Phys. Chem. Lett., 2020

Journal ref: J. Phys. Chem. Lett. 11, 5273-5278 (2020)

Optimal Control of Rotary Motors

Authors: Joseph N. E. Lucero, Aliakbar Mehdizadeh, David A. Sivak

Abstract: Single-molecule experiments have found near-perfect thermodynamic efficiency in the rotary motor F1-ATP synthase. To help elucidate the principles underlying nonequilibrium energetic efficiency in such stochastic machines, we investigate driving protocols that minimize dissipation near equilibrium in a simple model rotary mechanochemical motor, as determined by a generalized friction coefficient.… ▽ More Single-molecule experiments have found near-perfect thermodynamic efficiency in the rotary motor F1-ATP synthase. To help elucidate the principles underlying nonequilibrium energetic efficiency in such stochastic machines, we investigate driving protocols that minimize dissipation near equilibrium in a simple model rotary mechanochemical motor, as determined by a generalized friction coefficient. Our simple model has a periodic friction coefficient that peaks near system energy barriers. This implies a minimum-dissipation protocol that proceeds rapidly when the system is overwhelmingly in a single macrostate, but slows significantly near energy barriers, thereby harnessing thermal fluctuations to kick the system over energy barriers with minimal work input. This model also manifests a phenomenon not seen in otherwise similar non-periodic systems: sufficiently fast protocols can effectively lap the system. While this leads to a non-trivial tradeoff between accuracy of driving and energetic cost, we find that our designed protocols out-perform naive protocols. △ Less

Submitted 3 September, 2019; v1 submitted 27 July, 2018; originally announced July 2018.

Comments: 12 pages, 11 figures

Journal ref: Phys. Rev. E 99, 012119 (2019)

Low Loss Multi-Layer Wiring for Superconducting Microwave Devices

Authors: A. Dunsworth, A. Megrant, R. Barends, Yu Chen, Zijun Chen, B. Chiaro, A. Fowler, B. Foxen, E. Jeffrey, J. Kelly, P. V. Klimov, E. Lucero, J. Y. Mutus, M. Neeley, C. Neill, C. Quintana, P. Roushan, D. Sank, A. Vainsencher, J. Wenner, T. C. White, H. Neven, John M. Martinis

Abstract: Complex integrated circuits require multiple wiring layers. In complementary metal-oxide-semiconductor (CMOS) processing, these layers are robustly separated by amorphous dielectrics. These dielectrics would dominate energy loss in superconducting integrated circuits. Here we demonstrate a procedure that capitalizes on the structural benefits of inter-layer dielectrics during fabrication and mitig… ▽ More Complex integrated circuits require multiple wiring layers. In complementary metal-oxide-semiconductor (CMOS) processing, these layers are robustly separated by amorphous dielectrics. These dielectrics would dominate energy loss in superconducting integrated circuits. Here we demonstrate a procedure that capitalizes on the structural benefits of inter-layer dielectrics during fabrication and mitigates the added loss. We separate and support multiple wiring layers throughout fabrication using SiO$_2$ scaffolding, then remove it post-fabrication. This technique is compatible with foundry level processing and the can be generalized to make many different forms of low-loss multi-layer wiring. We use this technique to create freestanding aluminum vacuum gap crossovers (airbridges). We characterize the added capacitive loss of these airbridges by connecting ground planes over microwave frequency $λ/4$ coplanar waveguide resonators and measuring resonator loss. We measure a low power resonator loss of $\sim 3.9 \times 10^{-8}$ per bridge, which is 100 times lower than dielectric supported bridges. We further characterize these airbridges as crossovers, control line jumpers, and as part of a coupling network in gmon and fuxmon qubits. We measure qubit characteristic lifetimes ($T_1$'s) in excess of 30 $μ$s in gmon devices. △ Less

Submitted 28 February, 2018; v1 submitted 1 December, 2017; originally announced December 2017.

Qubit compatible superconducting interconnects

Authors: B. Foxen, J. Y. Mutus, E. Lucero, R. Graff, A. Megrant, Yu Chen, C. Quintana, B. Burkett, J. Kelly, E. Jeffrey, Yan Yang, Anthony Yu, K. Arya, R. Barends, Zijun Chen, B. Chiaro, A. Dunsworth, A. Fowler, C. Gidney, M. Giustina, T. Huang, P. Klimov, M. Neeley, C. Neill, P. Roushan , et al. (5 additional authors not shown)

Abstract: We present a fabrication process for fully superconducting interconnects compatible with superconducting qubit technology. These interconnects allow for the 3D integration of quantum circuits without introducing lossy amorphous dielectrics. They are composed of indium bumps several microns tall separated from an aluminum base layer by titanium nitride which serves as a diffusion barrier. We measur… ▽ More We present a fabrication process for fully superconducting interconnects compatible with superconducting qubit technology. These interconnects allow for the 3D integration of quantum circuits without introducing lossy amorphous dielectrics. They are composed of indium bumps several microns tall separated from an aluminum base layer by titanium nitride which serves as a diffusion barrier. We measure the whole structure to be superconducting (transition temperature of 1.1$\,$K), limited by the aluminum. These interconnects have an average critical current of 26.8$\,$mA, and mechanical shear and thermal cycle testing indicate that these devices are mechanically robust. Our process provides a method that reliably yields superconducting interconnects suitable for use with superconducting qubits. △ Less

Submitted 29 September, 2017; v1 submitted 14 August, 2017; originally announced August 2017.

Journal ref: http://iopscience.iop.org/article/10.1088/2058-9565/aa94fc

Implementing the Quantum von Neumann Architecture with Superconducting Circuits

Authors: Matteo Mariantoni, H. Wang, T. Yamamoto, M. Neeley, Radoslaw C. Bialczak, Y. Chen, M. Lenander, Erik Lucero, A. D. O'Connell, D. Sank, M. Weides, J. Wenner, Y. Yin, J. Zhao, A. N. Korotkov, A. N. Cleland, John M. Martinis

Abstract: The von Neumann architecture for a classical computer comprises a central processing unit and a memory holding instructions and data. We demonstrate a quantum central processing unit that exchanges data with a quantum random-access memory integrated on a chip, with instructions stored on a classical computer. We test our quantum machine by executing codes that involve seven quantum elements: Two s… ▽ More The von Neumann architecture for a classical computer comprises a central processing unit and a memory holding instructions and data. We demonstrate a quantum central processing unit that exchanges data with a quantum random-access memory integrated on a chip, with instructions stored on a classical computer. We test our quantum machine by executing codes that involve seven quantum elements: Two superconducting qubits coupled through a quantum bus, two quantum memories, and two zeroing registers. Two vital algorithms for quantum computing are demonstrated, the quantum Fourier transform, with 66% process fidelity, and the three-qubit Toffoli OR phase gate, with 98% phase fidelity. Our results, in combination especially with longer qubit coherence, illustrate a potentially viable approach to factoring numbers and implementing simple quantum error correction codes. △ Less

Submitted 16 September, 2011; originally announced September 2011.

Comments: To be published in Science (submitted version); 9 pages+4 figs. (main), 34 pages+12 figs.+3 tables (supplementary); includes Toffoli gate+quantum Fourier transform

Journal ref: Science 334, 61-65 (2011)

Photon shell game in three-resonator circuit quantum electrodynamics

Authors: Matteo Mariantoni, H. Wang, Radoslaw C. Bialczak, M. Lenander, Erik Lucero, M. Neeley, A. D. O'Connell, D. Sank, M. Weides, J. Wenner, T. Yamamoto, Y. Yin, J. Zhao, John M. Martinis, A. N. Cleland

Abstract: The generation and control of quantum states of light constitute fundamental tasks in cavity quantum electrodynamics (QED). The superconducting realization of cavity QED, circuit QED, enables on-chip microwave photonics, where superconducting qubits control and measure individual photon states. A long-standing issue in cavity QED is the coherent transfer of photons between two or more resonators.… ▽ More The generation and control of quantum states of light constitute fundamental tasks in cavity quantum electrodynamics (QED). The superconducting realization of cavity QED, circuit QED, enables on-chip microwave photonics, where superconducting qubits control and measure individual photon states. A long-standing issue in cavity QED is the coherent transfer of photons between two or more resonators. Here, we use circuit QED to implement a three-resonator architecture on a single chip, where the resonators are interconnected by two superconducting phase qubits. We use this circuit to shuffle one- and two-photon Fock states between the three resonators, and demonstrate qubit-mediated vacuum Rabi swaps between two resonators. This illustrates the potential for using multi-resonator circuits as photon quantum registries and for creating multipartite entanglement between delocalized bosonic modes. △ Less

Submitted 16 March, 2011; v1 submitted 12 November, 2010; originally announced November 2010.

Comments: 18 pages, 10 figures, 1 table. DOI refers to published paper on Nature Physics, not to the pre-review version posted here