-
Evolution of radiation profiles in a strongly baffled divertor on MAST Upgrade
Authors:
Fabio Federici,
Matthew L. Reinke,
Bruce Lipschultz,
Jack J. Lovell,
Kevin Verhaegh,
Cyd Cowley,
Mike Kryjak,
Peter Ryan,
Andrew J. Thornton,
James R. Harrison,
Byron J. Peterson,
Bartosz Lomanowski,
Jeremy D. Lore,
Yacopo Damizia
Abstract:
Plasma detachment involves interactions of the plasma with impurities and neutral particles, leading to significant losses of plasma power, momentum, and particles. Accurate mapping of plasma emissivity in the divertor and X-point region is essential for assessing the relationship between particle flux and radiative detachment. The recently validated InfraRed Video Bolometer (IRVB) diagnostic, in…
▽ More
Plasma detachment involves interactions of the plasma with impurities and neutral particles, leading to significant losses of plasma power, momentum, and particles. Accurate mapping of plasma emissivity in the divertor and X-point region is essential for assessing the relationship between particle flux and radiative detachment. The recently validated InfraRed Video Bolometer (IRVB) diagnostic, in MAST-U enables this mapping with higher spatial resolution than more established methods like resistive bolometers. In previous preliminary work, the evolution of radiative detachment was characterised in L-mode (power entering the scrape-off layer, PSOL ~0.4MW). With a conventional divertor the inner leg consistently detached ahead of the outer leg, and radiative detachment preceded particle flux detachment. This work presents results also from the third MAST-U experimental campaign, fuelled from the low field side instead of the high field side, including Ohmic and beam heated L-mode shots (with a power exiting the core up to PSOL ~1-1.5MW). The radiation peak moves upstream from the target at lower upstream densities than the ion target flux roll-over (typically considered the detachment onset), while the inner leg detaches before the outer one. The movement of the radiation is in partial agreement with the expectations from the DLS model, predicting a sudden shift from the target to the X-point. The energy confinement is found to be related to detachment, but there seems to be some margin between the radiation on the inner leg reaching the X-point and confinement being affected, a beneficial characteristic if it could be extrapolated to future reactors. For increasing PSOL the particle flux roll over is almost unaffected, while radiative detachment occurs at higher density in both legs, but much higher on the outer, suggesting an uneven distribution of the power exiting the core.
△ Less
Submitted 4 September, 2024;
originally announced September 2024.
-
First Access to ELM-free Negative Triangularity at Low Aspect Ratio
Authors:
A. O. Nelson,
C. Vincent,
H. Anand,
J. Lovell,
J. F. Parisi,
H. S. Wilson,
K. Imada,
W. P. Wehner,
M. Kochan,
S. Blackmore,
G. McArdle,
S. Guizzo,
L. Rondini,
S. Freiberger,
C. Paz-Soldan
Abstract:
A plasma scenario with negative triangularity (NT) shaping is achieved on MAST-U for the first time. While edge localized modes (ELMs) are eventually suppressed as the triangularity is decreased below $δ$ < -0.06, an extended period of H-mode operation with Type-III ELMs is sustained at less negative $δ$ even through access to the second stability region for ideal ballooning modes is closed. This…
▽ More
A plasma scenario with negative triangularity (NT) shaping is achieved on MAST-U for the first time. While edge localized modes (ELMs) are eventually suppressed as the triangularity is decreased below $δ$ < -0.06, an extended period of H-mode operation with Type-III ELMs is sustained at less negative $δ$ even through access to the second stability region for ideal ballooning modes is closed. This documents a qualitative difference from the ELM-free access conditions documented in NT scenarios on conventional aspect ratio machines. The electron temperature at the pedestal top drops across the transition to ELM-free operation, but a steady rise in core temperature as $δ$ is decreased allows for similar normalized beta in the ELM-free NT and H-mode positive triangularity shapes.
△ Less
Submitted 31 July, 2024;
originally announced August 2024.
-
First demonstration of Super-X divertor exhaust control for transient heat load management in compact fusion reactors
Authors:
B. Kool,
K. Verhaegh,
G. L. Derks,
T. A. Wijkamp,
N. Lonigro,
R. Doyle,
G. McArdle,
C. Vincent,
J. Lovell,
F. Federici,
S. S. Henderson,
R. T. Osawa,
D. Brida,
H. Reimerdes,
M. van Berkel,
The EUROfusion tokamak exploitation team,
the MAST-U team
Abstract:
Nuclear fusion could offer clean, abundant energy. However, managing the immense power exhausted from the core fusion plasma towards the divertor remains a major challenge. This is compounded in emerging compact reactor designs which promise more cost-effective pathways towards commercial fusion energy. Alternative divertor configurations (ADCs) are a potential solution to this challenge. In this…
▽ More
Nuclear fusion could offer clean, abundant energy. However, managing the immense power exhausted from the core fusion plasma towards the divertor remains a major challenge. This is compounded in emerging compact reactor designs which promise more cost-effective pathways towards commercial fusion energy. Alternative divertor configurations (ADCs) are a potential solution to this challenge. In this work, we demonstrate exhaust control in ADCs for the first time, on MAST-U. We employ a novel diagnostic strategy for the neutral gas buffer which shields the target. Our work shows that ADCs tackle key risks and uncertainties in realising fusion energy: 1) an enlarged operating window which 2) improves exhaust control through the absorption of transients which can remove the neutral shield and damage the divertor, 3) isolation of each divertor from other reactor regions, enabling combined control. This showcases real-world benefits of alternative divertors for effective heat load management and control in reactors.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Increased accuracy and signal-to-noise ratio through recent improvements in Infra-Red Video Bolometer fabrication and calibration
Authors:
Fabio Federici,
Jack J. Lovell,
G. A. Wurden,
Byron J. Peterson,
Kiyofumi Mukai
Abstract:
The Infra-Red Video Bolometer (IRVB) is a diagnostic equipped with an infra-red camera that measures the total radiated power in thousands of LOSs within a large field of view (FOV). Recently validated in MAST-U, it offers a high spatial resolution map of the radiated power in the divertor region, where large gradients are expected. The IRVB's sensing element comprises a thin layer of high Z absor…
▽ More
The Infra-Red Video Bolometer (IRVB) is a diagnostic equipped with an infra-red camera that measures the total radiated power in thousands of LOSs within a large field of view (FOV). Recently validated in MAST-U, it offers a high spatial resolution map of the radiated power in the divertor region, where large gradients are expected. The IRVB's sensing element comprises a thin layer of high Z absorbing material, typically Platinum, usually coated with Carbon to reduce reflections. It is here explored the possibility of using a relatively inert material like Titanium, that can be produced in layers up to 1mum compared to 2.5mum for Pt, and then coat it with Pt of the desired thickness (0.3mum per side here) and Carbon. This leads to a higher temperature signal (2 to 3 times), and better spatial resolution (about 4 times), resulting in higher accuracy in the measured power. This assembly is also expected to improve foil uniformity, as the Pt layer is obtained via deposition rather than mechanical processes. Given its multi-material composition, measuring the thermal properties of the foil assembly is vital. Various methods using a calibrated laser as a heat source have been developed, analysing the temperature profile shape or fitting the calculated laser power for different intensities and frequencies. It is here presented a simpler approach, that relies on analysing the separate components of the foil heat equation for a single laser exposure in a given area. This can then be iterated over the entire foil to capture local deviations.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
The AuScope Geodetic VLBI Array
Authors:
J. E. J. Lovell,
J. N. McCallum,
P. B. Reid,
P. M. McCulloch,
B. E. Baynes,
J. M. Dickey,
S. S. Shabala,
C. S. Watson,
O. Titov,
R. Ruddick,
R. Twilley,
C. Reynolds,
S. J. Tingay,
P. Shield,
R. Adada,
S. P. Ellingsen,
J. S. Morgan,
H. E. Bignall
Abstract:
The AuScope geodetic Very Long Baseline Interferometry array consists of three new 12 m radio telescopes and a correlation facility in Australia. The telescopes at Hobart (Tasmania), Katherine (Northern Territory) and Yarragadee (Western Australia) are co-located with other space geodetic techniques including Global Navigation Satellite Systems (GNSS) and gravity infrastructure, and in the case of…
▽ More
The AuScope geodetic Very Long Baseline Interferometry array consists of three new 12 m radio telescopes and a correlation facility in Australia. The telescopes at Hobart (Tasmania), Katherine (Northern Territory) and Yarragadee (Western Australia) are co-located with other space geodetic techniques including Global Navigation Satellite Systems (GNSS) and gravity infrastructure, and in the case of Yarragadee, Satellite Laser Ranging (SLR) and Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) facilities. The correlation facility is based in Perth (Western Australia).
This new facility will make significant contributions to improving the densification of the International Celestial Reference Frame in the Southern Hemisphere, and subsequently enhance the International Terrestrial Reference Frame through the ability to detect and mitigate systematic error. This, combined with the simultaneous densification of the GNSS network across Australia will enable the improved measurement of intraplate deformation across the Australian tectonic plate.
In this paper we present a description of this new infrastructure and present some initial results, including telescope performance measurements and positions of the telescopes in the International Terrestrial Reference Frame. We show that this array is already capable of achieving centimetre precision over typical long-baselines and that network and reference source systematic effects must be further improved to reach the ambitious goals of VLBI2010.
△ Less
Submitted 11 April, 2013;
originally announced April 2013.
