-
gSeaGen code by KM3NeT: an efficient tool to propagate muons simulated with CORSIKA
Authors:
S. Aiello,
A. Albert,
A. R. Alhebsi,
M. Alshamsi,
S. Alves Garre,
A. Ambrosone,
F. Ameli,
M. Andre,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
A. Bariego-Quintana,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
M. Bennani,
D. M. Benoit,
E. Berbee
, et al. (238 additional authors not shown)
Abstract:
The KM3NeT Collaboration has tackled a common challenge faced by the astroparticle physics community, namely adapting the experiment-specific simulation software to work with the CORSIKA air shower simulation output. The proposed solution is an extension of the open source code gSeaGen, which allows the transport of muons generated by CORSIKA to a detector of any size at an arbitrary depth. The gS…
▽ More
The KM3NeT Collaboration has tackled a common challenge faced by the astroparticle physics community, namely adapting the experiment-specific simulation software to work with the CORSIKA air shower simulation output. The proposed solution is an extension of the open source code gSeaGen, which allows the transport of muons generated by CORSIKA to a detector of any size at an arbitrary depth. The gSeaGen code was not only extended in terms of functionality but also underwent a thorough redesign of the muon propagation routine, resulting in a more accurate and efficient simulation. This paper presents the capabilities of the new gSeaGen code as well as prospects for further developments.
△ Less
Submitted 29 April, 2025; v1 submitted 31 October, 2024;
originally announced October 2024.
-
The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production
Authors:
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardacova,
B. Baret,
A. Bariego Quintana,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (259 additional authors not shown)
Abstract:
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl…
▽ More
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Response of G-NUMEN LaBr$_3$(Ce) detectors to high counting rates
Authors:
Elisa Maria Gandolfo,
José Roberto Brandao Oliveira,
Luigi Campajola,
Dimitra Pierroutsakou,
Alfonso Boiano,
Clementina Agodi,
Francesco Cappuzzello,
Diana Carbone,
Manuela Cavallaro,
Irene Ciraldo,
Daniela Calvo,
Franck Delaunay,
Canel Eke,
Fabio Longhitano,
Nilberto Medina,
Mauricio Moralles,
Diego Sartirana,
Vijay R. Sharma,
Alessandro Spatafora,
Dennis Toufen,
Paolo Finocchiaro
Abstract:
The G-NUMEN array is the future gamma spectrometer of the NUMEN experiment (Nuclear Matrix Element for the Neutrinoless double beta decay), to be installed around the object point of the MAGNEX magnetic spectrometer at the INFN-LNS laboratory. This project aims at exploring Double Charge Exchange (DCE) reactions in order to obtain crucial information about the neutrinoless double beta decay (…
▽ More
The G-NUMEN array is the future gamma spectrometer of the NUMEN experiment (Nuclear Matrix Element for the Neutrinoless double beta decay), to be installed around the object point of the MAGNEX magnetic spectrometer at the INFN-LNS laboratory. This project aims at exploring Double Charge Exchange (DCE) reactions in order to obtain crucial information about the neutrinoless double beta decay ($0νββ$). The primary objective of the G-NUMEN array is to detect the gamma rays emitted from the deexcitation of the excited states populated via DCE reactions with good energy resolution and detection efficiency, amidst a background composed of transitions from competing reaction channels with far higher cross sections. To achieve this, the G-NUMEN signals will be processed in coincidence with those generated by the detection of the reaction ejectiles in the MAGNEX Focal Plane Detector(FPD). Under the expected experimental conditions, G-NUMEN detectors will operate at high counting rates, of the order of hundreds of kHz per detector, while maintaining excellent energy and timing resolutions. The complete array will consist of over 100 LaBr$_3$(Ce) scintillators. Initial tests have been conducted on the first detectors of the array, allowing for the determination of their performance at high rates.
△ Less
Submitted 15 July, 2023;
originally announced July 2023.
-
Nanobeacon: A time calibration device for the KM3NeT neutrino telescope
Authors:
S. Aiello,
A. Albert,
M. Alshamsi,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
G. Androulakis,
M. Anghinolfi,
M. Anguita,
M. Ardid,
S. Ardid,
J. Aublin,
C. Bagatelas,
B. Baret,
S. Basegmez du Pree,
M. Bendahman,
F. Benfenati,
E. Berbee,
A. M. van den Berg,
V. Bertine,
S. Biagi,
M. Boettcher,
M. Bou Cabo
, et al. (216 additional authors not shown)
Abstract:
The KM3NeT Collaboration is currently constructing a multi-site high-energy neutrino telescope in the Mediterranean Sea consisting of matrices of pressure-resistant glass spheres, each holding a set of 31 small-area photomultipliers. The main goals of the telescope are the observation of neutrino sources in the Universe and the measurement of the neutrino oscillation parameters with atmospheric ne…
▽ More
The KM3NeT Collaboration is currently constructing a multi-site high-energy neutrino telescope in the Mediterranean Sea consisting of matrices of pressure-resistant glass spheres, each holding a set of 31 small-area photomultipliers. The main goals of the telescope are the observation of neutrino sources in the Universe and the measurement of the neutrino oscillation parameters with atmospheric neutrinos. Both extraterrestrial and atmospheric neutrinos are detected through the Cherenkov light induced in seawater by charged particles produced in neutrino interactions in the surrounding medium. A relative time synchronization between photomultipliers of the order of 1 ns is needed to guarantee the required angular resolution of the detector. Due to the large detector volumes to be instrumented by KM3NeT, a cost reduction of the different systems is a priority. To this end, the inexpensive Nanobeacon has been designed and developed by the KM3NeT Collaboration to be used for detector time-calibration studies. At present, more than 600 Nanobeacons have been already produced. The characterization of the optical pulse and the wavelength emission profile of the devices are critical for the time calibration. In this paper, the main features of the Nanobeacon design, production and operation, together with the main properties of the light pulse generated are described.
△ Less
Submitted 30 October, 2021;
originally announced November 2021.
-
Analysis of the background on cross section measurements with the MAGNEX spectrometer: the (20Ne,20O) Double Charge Exchange case
Authors:
S. Calabrese,
F. Cappuzzello,
D. Carbone,
M. Cavallaro,
C. Agodi,
D. Torresi,
L. Acosta,
D. Bonanno,
D. Bongiovanni,
T. Borello-Lewin,
I. Boztosun,
G. A. Brischetto,
D. Calvo,
I. Ciraldo,
N. Deshmukh,
P. N. de Faria,
P. Finocchiaro,
A. Foti,
G. Gallo,
A. Hacisalihoglu,
F. Iazzi,
R. Introzzi,
L. La Fauci,
G. Lanzalone,
R. Linares
, et al. (18 additional authors not shown)
Abstract:
The MAGNEX magnetic spectrometer is used in the experimental measurements of Double Charge Exchange and Multi-Nucleon Transfer reactions induced by heavy ions within the NUMEN project. These processes are characterized by small cross sections under a large background due to other reaction channels. Therefore an accurate control of the signal to background ratio is mandatory. In this article, the d…
▽ More
The MAGNEX magnetic spectrometer is used in the experimental measurements of Double Charge Exchange and Multi-Nucleon Transfer reactions induced by heavy ions within the NUMEN project. These processes are characterized by small cross sections under a large background due to other reaction channels. Therefore an accurate control of the signal to background ratio is mandatory. In this article, the determination of the MAGNEX spectrometer background contribution on cross section measurements is presented by applying a suitable analysis to quantify the limits of the adopted particle identification technique. The method is discussed considering the 116Cd(20Ne,20O)116Sn Double Charge Exchange reaction data, however it can be applied to any other reaction channel of interest.
△ Less
Submitted 25 October, 2021;
originally announced October 2021.
-
Gamma Ray Counters to Monitor Radioactive Waste Packages in the MICADO Project
Authors:
Luigi Cosentino,
Martina Giuffrida,
Sergio Lo Meo,
Fabio Longhitano,
Alfio Pappalardo,
Giuseppe Passaro,
Paolo Finocchiaro
Abstract:
One of the goals of the MICADO Euratom project is to monitor the gamma rays coming out of radioactive waste drums in storage sites on a medium/long term basis. For this purpose 36 low-cost gamma ray counters were designed and built to act as a demonstrator. These counters, named SciFi, are based on a scintillating fiber readout at each end by a silicon photomultiplier, as-sembled in a robust arran…
▽ More
One of the goals of the MICADO Euratom project is to monitor the gamma rays coming out of radioactive waste drums in storage sites on a medium/long term basis. For this purpose 36 low-cost gamma ray counters were designed and built to act as a demonstrator. These counters, named SciFi, are based on a scintillating fiber readout at each end by a silicon photomultiplier, as-sembled in a robust arrangement in form of 80 cm long pipes. Several counters will be placed around radwaste packages in order to monitor the gamma dose-rate by collecting a continuous data stream. The 36 sensors were thoroughly tested with a 22Na, a 137Cs and an AmBe sources, the results are quite satisfactory and the next step will be the test in a real environment
△ Less
Submitted 6 May, 2021;
originally announced May 2021.
-
Event reconstruction for KM3NeT/ORCA using convolutional neural networks
Authors:
Sebastiano Aiello,
Arnauld Albert,
Sergio Alves Garre,
Zineb Aly,
Fabrizio Ameli,
Michel Andre,
Giorgos Androulakis,
Marco Anghinolfi,
Mancia Anguita,
Gisela Anton,
Miquel Ardid,
Julien Aublin,
Christos Bagatelas,
Giancarlo Barbarino,
Bruny Baret,
Suzan Basegmez du Pree,
Meriem Bendahman,
Edward Berbee,
Vincent Bertin,
Simone Biagi,
Andrea Biagioni,
Matthias Bissinger,
Markus Boettcher,
Jihad Boumaaza,
Mohammed Bouta
, et al. (207 additional authors not shown)
Abstract:
The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neur…
▽ More
The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neural networks to neutrino telescopes, using simulated datasets for the KM3NeT/ORCA detector as an example. To this end, the networks are employed to achieve reconstruction and classification tasks that constitute an alternative to the analysis pipeline presented for KM3NeT/ORCA in the KM3NeT Letter of Intent. They are used to infer event reconstruction estimates for the energy, the direction, and the interaction point of incident neutrinos. The spatial distribution of Cherenkov light generated by charged particles induced in neutrino interactions is classified as shower- or track-like, and the main background processes associated with the detection of atmospheric neutrinos are recognized. Performance comparisons to machine-learning classification and maximum-likelihood reconstruction algorithms previously developed for KM3NeT/ORCA are provided. It is shown that this application of deep convolutional neural networks to simulated datasets for a large-volume neutrino telescope yields competitive reconstruction results and performance improvements with respect to classical approaches.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
Dependence of atmospheric muon flux on seawater depth measured with the first KM3NeT detection units
Authors:
KM3NeT Collaboration,
M. Ageron,
S. Aiello,
F. Ameli,
M. Andre,
G. Androulakis,
M. Anghinolfi,
G. Anton,
M. Ardid,
J. Aublin,
C. Bagatelas,
G. Barbarino,
B. Baret,
S. Basegmez du Pree,
A. Belias,
E. Berbee,
A. M. van den Berg,
V. Bertin,
V. van Beveren,
S. Biagi,
A. Biagioni,
S. Bianucci,
M. Billault,
M. Bissinger,
R. de Boer
, et al. (240 additional authors not shown)
Abstract:
KM3NeT is a research infrastructure located in the Mediterranean Sea, that will consist of two deep-sea Cherenkov neutrino detectors. With one detector (ARCA), the KM3NeT Collaboration aims at identifying and studying TeV-PeV astrophysical neutrino sources. With the other detector (ORCA), the neutrino mass ordering will be determined by studying GeV-scale atmospheric neutrino oscillations. The fir…
▽ More
KM3NeT is a research infrastructure located in the Mediterranean Sea, that will consist of two deep-sea Cherenkov neutrino detectors. With one detector (ARCA), the KM3NeT Collaboration aims at identifying and studying TeV-PeV astrophysical neutrino sources. With the other detector (ORCA), the neutrino mass ordering will be determined by studying GeV-scale atmospheric neutrino oscillations. The first KM3NeT detection units were deployed at the Italian and French sites between 2015 and 2017. In this paper, a description of the detector is presented, together with a summary of the procedures used to calibrate the detector in-situ. Finally, the measurement of the atmospheric muon flux between 2232-3386 m seawater depth is obtained.
△ Less
Submitted 4 February, 2020; v1 submitted 6 June, 2019;
originally announced June 2019.
-
GIGJ: a crustal gravity model of the Guangdong Province for predicting the geoneutrino signal at the JUNO experiment
Authors:
M. Reguzzoni,
L. Rossi,
M. Baldoncini,
I. Callegari,
P. Poli,
D. Sampietro,
V. Strati,
F. Mantovani,
G. Andronico,
V. Antonelli,
M. Bellato,
E. Bernieri,
A. Brigatti,
R. Brugnera,
A. Budano,
M. Buscemi,
S. Bussino,
R. Caruso,
D. Chiesa,
D. Corti,
F. Dal Corso,
X. F. Ding,
S. Dusini,
A. Fabbri,
G. Fiorentini
, et al. (44 additional authors not shown)
Abstract:
Gravimetric methods are expected to play a decisive role in geophysical modeling of the regional crustal structure applied to geoneutrino studies. GIGJ (GOCE Inversion for Geoneutrinos at JUNO) is a 3D numerical model constituted by ~46 x 10$^{3}$ voxels of 50 x 50 x 0.1 km, built by inverting gravimetric data over the 6° x 4° area centered at the Jiangmen Underground Neutrino Observatory (JUNO) e…
▽ More
Gravimetric methods are expected to play a decisive role in geophysical modeling of the regional crustal structure applied to geoneutrino studies. GIGJ (GOCE Inversion for Geoneutrinos at JUNO) is a 3D numerical model constituted by ~46 x 10$^{3}$ voxels of 50 x 50 x 0.1 km, built by inverting gravimetric data over the 6° x 4° area centered at the Jiangmen Underground Neutrino Observatory (JUNO) experiment, currently under construction in the Guangdong Province (China). The a-priori modeling is based on the adoption of deep seismic sounding profiles, receiver functions, teleseismic P-wave velocity models and Moho depth maps, according to their own accuracy and spatial resolution. The inversion method allowed for integrating GOCE data with the a-priori information and regularization conditions through a Bayesian approach and a stochastic optimization. GIGJ fits the homogeneously distributed GOCE gravity data, characterized by high accuracy, with a ~1 mGal standard deviation of the residuals, compatible with the observation accuracy. Conversely to existing global models, GIGJ provides a site-specific subdivision of the crustal layers masses which uncertainties include estimation errors, associated to the gravimetric solution, and systematic uncertainties, related to the adoption of a fixed sedimentary layer. A consequence of this local rearrangement of the crustal layer thicknesses is a ~21% reduction and a ~24% increase of the middle and lower crust expected geoneutrino signal, respectively. Finally, the geophysical uncertainties of geoneutrino signals at JUNO produced by unitary uranium and thorium abundances distributed in the upper, middle and lower crust are reduced by 77%, 55% and 78%, respectively. The numerical model is available at http://www.fe.infn.it/u/radioactivity/GIGJ
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
The NUMEN project: NUclear Matrix Elements for Neutrinoless double beta decay
Authors:
F. Cappuzzello,
C. Agodi,
M. Cavallaro,
D. Carbone,
S. Tudisco,
D. Lo Presti,
J. R. B. Oliveira,
P. Finocchiaro,
M. Colonna,
D. Rifuggiato,
L. Calabretta,
D. Calvo,
L. Pandola,
L. Acosta,
N. Auerbach,
J. Bellone,
R. Bijker,
D. Bonanno,
D. Bongiovanni,
T. Borello-Lewin,
I. Boztosun,
O. Brunasso,
S. Burrello,
S. Calabrese,
A. Calanna
, et al. (46 additional authors not shown)
Abstract:
The article describes the main achievements of the NUMEN project together with an updated and detailed overview of the related R&D activities and theoretical developments. NUMEN proposes an innovative technique to access the nuclear matrix elements entering the expression of the lifetime of the double beta decay by cross section measurements of heavy-ion induced Double Charge Exchange (DCE) reacti…
▽ More
The article describes the main achievements of the NUMEN project together with an updated and detailed overview of the related R&D activities and theoretical developments. NUMEN proposes an innovative technique to access the nuclear matrix elements entering the expression of the lifetime of the double beta decay by cross section measurements of heavy-ion induced Double Charge Exchange (DCE) reactions. Despite the two processes, namely neutrinoless double beta decay and DCE reactions, are triggered by the weak and strong interaction respectively, important analogies are suggested. The basic point is the coincidence of the initial and final state many-body wave-functions in the two types of processes and the formal similarity of the transition operators. First experimental results obtained at the INFN-LNS laboratory for the 40Ca(18O,18Ne)40Ar reaction at 270 MeV, give encouraging indication on the capability of the proposed technique to access relevant quantitative information. The two major aspects for this project are the K800 Superconducting Cyclotron and MAGNEX spectrometer. The former is used for the acceleration of the required high resolution and low emittance heavy ion beams and the latter is the large acceptance magnetic spectrometer for the detection of the ejectiles. The use of the high-order trajectory reconstruction technique, implemented in MAGNEX, allows to reach the experimental resolution and sensitivity required for the accurate measurement of the DCE cross sections at forward angles. However, the tiny values of such cross sections and the resolution requirements demand beam intensities much larger than manageable with the present facility. The on-going upgrade of the INFN-LNS facilities in this perspective is part of the NUMEN project and will be discussed in the article.
△ Less
Submitted 21 November, 2018;
originally announced November 2018.
-
The MEV project: design and testing of a new high-resolution telescope for Muography of Etna Volcano
Authors:
D. Lo Presti,
G. Gallo,
D. L. Bonanno,
G. Bonanno,
D. G. Bongiovanni,
D. Carbone,
C. Ferlito,
J. Immè,
P. La Rocca,
F. Longhitano,
A. Messina,
S. Reito,
F. Riggi,
G. Russo,
L. Zuccarello
Abstract:
The MEV project aims at developing a muon telescope expressly designed for the muography of Etna Volcano. In particular, one of the active craters in the summit area of the volcano would be a suitable target for this experiment. A muon tracking telescope with high imaging resolution was built and tested during 2017. The telescope is a tracker based on extruded scintillating bars with WLS fibres an…
▽ More
The MEV project aims at developing a muon telescope expressly designed for the muography of Etna Volcano. In particular, one of the active craters in the summit area of the volcano would be a suitable target for this experiment. A muon tracking telescope with high imaging resolution was built and tested during 2017. The telescope is a tracker based on extruded scintillating bars with WLS fibres and featuring an innovative read-out architecture. It is composed of three XY planes with a sensitive area of \SI{1}{m^2}; the angular resolution does not exceeds \SI{0.4}{\milli\steradian} and the total angular aperture is about $\pm$\SI{45}{\degree}. A special effort concerned the design of mechanics and electronics in order to meet the requirements of a detector capable to work in a hostile environment such as the top of a tall volcano, at a far distance from any facility. The test phase started in January 2017 and ended successfully at the end of July 2017. An extinct volcanic crater (the Monti Rossi, in the village of Nicolosi, about 15km from Catania) is the target of the measurement. The detector acquired data for about 120 days and the preliminary results are reported in this work.
△ Less
Submitted 29 May, 2018;
originally announced May 2018.
-
Charge reconstruction in large-area photomultipliers
Authors:
M. Grassi,
M. Montuschi,
M. Baldoncini,
F. Mantovani,
B. Ricci,
G. Andronico,
V. Antonelli,
M. Bellato,
E. Bernieri,
A. Brigatti,
R. Brugnera,
A. Budano,
M. Buscemi,
S. Bussino,
R. Caruso,
D. Chiesa,
D. Corti,
F. Dal Corso,
X. F. Ding,
S. Dusini,
A. Fabbri,
G. Fiorentini,
R. Ford,
A. Formozov,
G. Galet
, et al. (38 additional authors not shown)
Abstract:
Large-area PhotoMultiplier Tubes (PMT) allow to efficiently instrument Liquid Scintillator (LS) neutrino detectors, where large target masses are pivotal to compensate for neutrinos' extremely elusive nature. Depending on the detector light yield, several scintillation photons stemming from the same neutrino interaction are likely to hit a single PMT in a few tens/hundreds of nanoseconds, resultin…
▽ More
Large-area PhotoMultiplier Tubes (PMT) allow to efficiently instrument Liquid Scintillator (LS) neutrino detectors, where large target masses are pivotal to compensate for neutrinos' extremely elusive nature. Depending on the detector light yield, several scintillation photons stemming from the same neutrino interaction are likely to hit a single PMT in a few tens/hundreds of nanoseconds, resulting in several photoelectrons (PEs) to pile-up at the PMT anode. In such scenario, the signal generated by each PE is entangled to the others, and an accurate PMT charge reconstruction becomes challenging. This manuscript describes an experimental method able to address the PMT charge reconstruction in the case of large PE pile-up, providing an unbiased charge estimator at the permille level up to 15 detected PEs. The method is based on a signal filtering technique (Wiener filter) which suppresses the noise due to both PMT and readout electronics, and on a Fourier-based deconvolution able to minimize the influence of signal distortions ---such as an overshoot. The analysis of simulated PMT waveforms shows that the slope of a linear regression modeling the relation between reconstructed and true charge values improves from $0.769 \pm 0.001$ (without deconvolution) to $0.989 \pm 0.001$ (with deconvolution), where unitary slope implies perfect reconstruction. A C++ implementation of the charge reconstruction algorithm is available online at http://www.fe.infn.it/CRA .
△ Less
Submitted 26 January, 2018;
originally announced January 2018.
-
Mini-phoswich and SiPM for Heavy Ion Detection
Authors:
D. Carbone,
P. Finocchiaro,
C. Agodi,
D. Bonanno,
D. Bongiovanni,
M. Cavallaro,
F. Cappuzzello,
L. Cosentino,
G. Gallo,
F. Longhitano,
D. Lo Presti,
S. Reito
Abstract:
The possibility to use a mini-phoswich detector to identify ions in the region of Z ~ 10 is explored in the framework of the NUMEN project. The NUMEN program, aimed at the investigation of the nuclear matrix elements connected to the neutrinoless double beta decay by means of double charge exchange nuclear reactions, foresees very high fluencies, which prevent the use of standard silicon as stop d…
▽ More
The possibility to use a mini-phoswich detector to identify ions in the region of Z ~ 10 is explored in the framework of the NUMEN project. The NUMEN program, aimed at the investigation of the nuclear matrix elements connected to the neutrinoless double beta decay by means of double charge exchange nuclear reactions, foresees very high fluencies, which prevent the use of standard silicon as stop detectors. The need of reasonable radiation hardness, together with a total energy resolution around 2% and a high granularity, makes scintillators possible candidates. Promising results are obtained using an array of plastic + inorganic phoswich scintillators readout by means of Silicon Photo Multipliers.
△ Less
Submitted 22 November, 2017;
originally announced November 2017.
-
Long term monitoring of the optical background in the Capo Passero deep-sea site with the NEMO tower prototype
Authors:
S. Adrián-Martínez,
S. Aiello,
F. Ameli,
M. Anghinolfi,
M. Ardid,
G. Barbarino,
E. Barbarito,
F. C. T. Barbato,
N. Beverini,
S. Biagi,
A. Biagioni,
B. Bouhadef,
C. Bozza,
G. Cacopardo,
M. Calamai,
C. Calí,
D. Calvo,
A. Capone,
F. Caruso,
A. Ceres,
T. Chiarusi,
M. Circella,
R. Cocimano,
R. Coniglione,
M. Costa
, et al. (79 additional authors not shown)
Abstract:
The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italia…
▽ More
The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italian node of the KM3NeT neutrino telescope will be built. The installation and operation of the NEMO Phase-2 tower has proven the functionality of the infrastructure and the operability at 3500 m depth. A more than one year long monitoring of the deep water characteristics of the site has been also provided. In this paper the infrastructure and the tower structure and instrumentation are described. The results of long term optical background measurements are presented. The rates show stable and low baseline values, compatible with the contribution of 40K light emission, with a small percentage of light bursts due to bioluminescence. All these features confirm the stability and good optical properties of the site.
△ Less
Submitted 28 January, 2016; v1 submitted 17 July, 2015;
originally announced July 2015.
-
Measurement of the atmospheric muon depth intensity relation with the NEMO Phase-2 tower
Authors:
S. Aiello,
F. Ameli,
M. Anghinolfi,
G. Barbarino,
E. Barbarito,
F. Barbato,
N. Beverini,
S. Biagi,
B. Bouhadef,
C. Bozza,
G. Cacopardo,
M. Calamai,
C. Calì,
A. Capone,
F. Caruso,
A. Ceres,
T. Chiarusi,
M. Circella,
R. Cocimano,
R. Coniglione,
M. Costa,
G. Cuttone,
C. D'Amato,
A. D'Amico,
G. De Bonis
, et al. (68 additional authors not shown)
Abstract:
The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the…
▽ More
The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the systematic effects due to uncertainties on environmental and detector parameters is also included. The associated depth intensity relation was evaluated and compared with previous measurements and theoretical predictions. With the present analysis, the muon depth intensity relation has been measured up to 13 km of water equivalent.
△ Less
Submitted 3 December, 2014; v1 submitted 2 December, 2014;
originally announced December 2014.
