-
First measurement of neutron capture multiplicity in neutrino-oxygen neutral-current quasi-elastic-like interactions using an accelerator neutrino beam
Authors:
T2K Collaboration,
K. Abe,
S. Abe,
R. Akutsu,
H. Alarakia-Charles,
Y. I. Alj Hakim,
S. Alonso Monsalve,
L. Anthony,
M. Antonova,
S. Aoki,
K. A. Apte,
T. Arai,
T. Arihara,
S. Arimoto,
Y. Asada,
Y. Ashida,
N. Babu,
G. Barr,
D. Barrow,
P. Bates,
M. Batkiewicz-Kwasniak,
V. Berardi,
L. Berns,
S. Bordoni,
S. B. Boyd
, et al. (314 additional authors not shown)
Abstract:
We report the first measurement of neutron capture multiplicity in neutrino-oxygen neutral-current quasi-elastic-like interactions at the gadolinium-loaded Super-Kamiokande detector using the T2K neutrino beam, which has a peak energy of about 0.6 GeV. A total of 30 neutral-current quasi-elastic-like event candidates were selected from T2K data corresponding to an exposure of $1.76\times10^{20}$ p…
▽ More
We report the first measurement of neutron capture multiplicity in neutrino-oxygen neutral-current quasi-elastic-like interactions at the gadolinium-loaded Super-Kamiokande detector using the T2K neutrino beam, which has a peak energy of about 0.6 GeV. A total of 30 neutral-current quasi-elastic-like event candidates were selected from T2K data corresponding to an exposure of $1.76\times10^{20}$ protons on target. The $γ$ ray signals resulting from neutron captures were identified using a neural network. The flux-averaged mean neutron capture multiplicity was measured to be $1.37\pm0.33\text{ (stat.)}$$^{+0.17}_{-0.27}\text{ (syst.)}$, which is compatible within $2.3\,σ$ than predictions obtained using our nominal simulation. We discuss potential sources of systematic uncertainty in the prediction and demonstrate that a significant portion of this discrepancy arises from the modeling of hadron-nucleus interactions in the detector medium.
△ Less
Submitted 30 May, 2025; v1 submitted 28 May, 2025;
originally announced May 2025.
-
Unbinned Inference with Correlated Events
Authors:
Krish Desai,
Owen Long,
Benjamin Nachman
Abstract:
Modern machine learning has enabled parameter inference from event-level data without the need to first summarize all events with a histogram. All of these unbinned inference methods make use of the fact that the events are statistically independent so that the log likelihood is a sum over events. However, this assumption is not valid for unbinned inference on unfolded data, where the deconvolutio…
▽ More
Modern machine learning has enabled parameter inference from event-level data without the need to first summarize all events with a histogram. All of these unbinned inference methods make use of the fact that the events are statistically independent so that the log likelihood is a sum over events. However, this assumption is not valid for unbinned inference on unfolded data, where the deconvolution process induces a correlation between events. We explore the impact of event correlations on downstream inference tasks in the context of the OmniFold unbinned unfolding method. We find that uncertainties may be significantly underestimated when event correlations are excluded from uncertainty quantification.
△ Less
Submitted 18 April, 2025;
originally announced April 2025.
-
Designing Observables for Measurements with Deep Learning
Authors:
Owen Long,
Benjamin Nachman
Abstract:
Many analyses in particle and nuclear physics use simulations to infer fundamental, effective, or phenomenological parameters of the underlying physics models. When the inference is performed with unfolded cross sections, the observables are designed using physics intuition and heuristics. We propose to design targeted observables with machine learning. Unfolded, differential cross sections in a n…
▽ More
Many analyses in particle and nuclear physics use simulations to infer fundamental, effective, or phenomenological parameters of the underlying physics models. When the inference is performed with unfolded cross sections, the observables are designed using physics intuition and heuristics. We propose to design targeted observables with machine learning. Unfolded, differential cross sections in a neural network output contain the most information about parameters of interest and can be well-measured by construction. The networks are trained using a custom loss function that rewards outputs that are sensitive to the parameter(s) of interest while simultaneously penalizing outputs that are different between particle-level and detector-level (to minimize detector distortions). We demonstrate this idea in simulation using two physics models for inclusive measurements in deep inelastic scattering. We find that the new approach is more sensitive than classical observables at distinguishing the two models and also has a reduced unfolding uncertainty due to the reduced detector distortions.
△ Less
Submitted 17 September, 2024; v1 submitted 12 October, 2023;
originally announced October 2023.
-
Fast Current Regulation and Persistent Current Maintenance of High-Temperature Superconducting Magnets with Contact Power Supply and Flux Pump
Authors:
Chenghuai Wu,
Wei Wang,
Run Long,
Hong Li,
Li Zhou,
Peng Liu
Abstract:
Due to the properties of high temperature superconducting (HTS) materials, current attenuation is inevitable during the closed-loop operation of HTS magnets. When a contact DC power supply is used to supplement this attenuation, it inevitably creates a huge thermal burden on the cryogenic system. The flux pump is a revolutionary new power source that can charge closed-loop HTS magnet wirelessly. H…
▽ More
Due to the properties of high temperature superconducting (HTS) materials, current attenuation is inevitable during the closed-loop operation of HTS magnets. When a contact DC power supply is used to supplement this attenuation, it inevitably creates a huge thermal burden on the cryogenic system. The flux pump is a revolutionary new power source that can charge closed-loop HTS magnet wirelessly. However, for HTS magnets with a large inductance, such as particle accelerator magnets and magnetic confinement magnet in Tokamak devices, the flux pump cannot fast adjust the DC current of the magnet, due to its small DC output voltage. Here, we present a method to fast regulate the current in a closed-loop HTS magnet using a contact DC power supply and persistent current switch (PCS). After current regulation, the HTS magnet is operated in the persistent current mode (PCM) with a flux pump. By applying the "four-quadrant" control theory of the flux pump allows, the current in HTS magnet is controlled with high stability. This study provide a power strategy for the fast current regulation and maintenance of persistent current in the HTS magnet, enabling the industrial applications of flux pumps for HTS magnets with large inductance.
△ Less
Submitted 19 July, 2023;
originally announced July 2023.
-
Substrate-Selective Adhesion of Metal Nanoparticles to Graphene Devices
Authors:
Patrick J. Edwards,
Sean Stuart,
James T. Farmer,
Ran Shi,
Run Long,
Oleg V. Prezhdo,
Vitaly V. Kresin
Abstract:
Nanostructured electronic devices, such as those based on graphene, are typically grown on top of the insulator SiO2. Their exposure to a flux of small size-selected silver nanoparticles has revealed remarkably selective adhesion: the graphene channel can be made fully metallized while the insulating substrate remains coverage-free. This conspicuous contrast derives from the low binding energy bet…
▽ More
Nanostructured electronic devices, such as those based on graphene, are typically grown on top of the insulator SiO2. Their exposure to a flux of small size-selected silver nanoparticles has revealed remarkably selective adhesion: the graphene channel can be made fully metallized while the insulating substrate remains coverage-free. This conspicuous contrast derives from the low binding energy between the metal nanoparticles and a contaminant-free passivated silica surface. In addition to providing physical insight into nanoparticle adhesion, this effect may be of value in applications involving deposition of metallic layers on device working surfaces: it eliminates the need for masking the insulating region and the associated extensive and potentially deleterious pre- and postprocessing.
△ Less
Submitted 12 July, 2023;
originally announced July 2023.
-
Scintillator ageing of the T2K near detectors from 2010 to 2021
Authors:
The T2K Collaboration,
K. Abe,
N. Akhlaq,
R. Akutsu,
A. Ali,
C. Alt,
C. Andreopoulos,
M. Antonova,
S. Aoki,
T. Arihara,
Y. Asada,
Y. Ashida,
E. T. Atkin,
S. Ban,
M. Barbi,
G. J. Barker,
G. Barr,
D. Barrow,
M. Batkiewicz-Kwasniak,
F. Bench,
V. Berardi,
L. Berns,
S. Bhadra,
A. Blanchet,
A. Blondel
, et al. (333 additional authors not shown)
Abstract:
The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation…
▽ More
The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation rate through to 2040 indicates the recorded light yield should remain above the lower threshold used by the current reconstruction algorithms for all subsystems. This will allow the near detectors to continue contributing to important physics measurements during the T2K-II and Hyper-Kamiokande eras. Additionally, work to disentangle the degradation of the plastic scintillator and wavelength shifting fibres shows that the reduction in light yield can be attributed to the ageing of the plastic scintillator.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
A Muon Collider Facility for Physics Discovery
Authors:
D. Stratakis,
N. Mokhov,
M. Palmer,
N. Pastrone,
T. Raubenheimer,
C. Rogers,
D. Schulte,
V. Shiltsev,
J. Tang,
A. Yamamoto,
C. Aimè,
M. A. Mahmoud,
N. Bartosik,
E. Barzi,
A. Bersani,
A. Bertolin,
M. Bonesini,
B. Caiffi,
M. Casarsa,
M. G. Catanesi,
A. Cerri,
C. Curatolo,
M. Dam,
H. Damerau,
E. De Matteis
, et al. (44 additional authors not shown)
Abstract:
Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this conte…
▽ More
Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this context, a new international collaboration has formed to further extend the design concepts and performance studies of such a machine. This effort is focused on delivering the elements of a $\sim$10 TeV center of mass (CM) energy design to explore the physics energy frontier. The path to such a machine may pass through lower energy options. Currently a 3 TeV CM stage is considered. Other energy stages could also be explored, e.g. an s-channel Higgs Factory operating at 125 GeV CM. We describe the status of the R&D and design effort towards such a machine and lay out a plan to bring these concepts to maturity as a tool for the high energy physics community.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
An optical elevator for precise delivery of cold atoms using an acousto-optical deflector
Authors:
Francesco Ferri,
Arthur La Rooij,
Claire Lebouteiller,
Pierre-Antoine Bourdel,
Mohamed Baghdad,
Sylvain Schwartz,
Sébastien Garcia,
Jakob Reichel,
Romain Long
Abstract:
We implement a simple method for fast and precise delivery of ultracold atoms to a microscopic device, i.e. a Fabry-Perot microcavity. By moving a single beam optical dipole trap in a direction perpendicular to the beam axis with an acousto-optical deflector, we transport up to 1 million atoms within 100$\,$ms over $1\,$cm. Under these conditions, a transport efficiency above $95\%$ is achieved wi…
▽ More
We implement a simple method for fast and precise delivery of ultracold atoms to a microscopic device, i.e. a Fabry-Perot microcavity. By moving a single beam optical dipole trap in a direction perpendicular to the beam axis with an acousto-optical deflector, we transport up to 1 million atoms within 100$\,$ms over $1\,$cm. Under these conditions, a transport efficiency above $95\%$ is achieved with only minimal heating. The atomic cloud is accurately positioned within the microcavity and transferred into an intra-cavity optical lattice. With the addition of a secondary guiding beam, we show how residual sloshing motion along the shallow axis of the trap can be minimized.
△ Less
Submitted 7 November, 2021;
originally announced November 2021.
-
Anomalous beam transport through Gabor (plasma) lens prototype
Authors:
T. Nonnenmacher,
T. S. Dascalu,
R. Bingham,
C. L. Cheung,
H. T. Lau,
K. R. Long,
J. Pozimski,
C. Whyte
Abstract:
An electron plasma lens is a cost-effective, compact, strong-focusing element that can ensure efficient capture of low-energy proton and ion beams from laser-driven sources. A Gabor lens prototype was built for high electron density operation at Imperial College London. The parameters of the stable operation regime of the lens and its performance during a beam test with 1.4 MeV protons are reporte…
▽ More
An electron plasma lens is a cost-effective, compact, strong-focusing element that can ensure efficient capture of low-energy proton and ion beams from laser-driven sources. A Gabor lens prototype was built for high electron density operation at Imperial College London. The parameters of the stable operation regime of the lens and its performance during a beam test with 1.4 MeV protons are reported here. Narrow pencil beams were imaged on a scintillator screen 67 cm downstream of the lens. The lens converted the pencil beams into rings that show position-dependent shape and intensity modulation that are dependent on the settings of the lens. Characterisation of the focusing effect suggests that the plasma column exhibited an off-axis rotation similar to the $m=1$ diocotron instability. The association of the instability with the cause of the rings was investigated using particle tracking simulations.
△ Less
Submitted 12 May, 2021; v1 submitted 12 April, 2021;
originally announced April 2021.
-
Supernova Model Discrimination with Hyper-Kamiokande
Authors:
Hyper-Kamiokande Collaboration,
:,
K. Abe,
P. Adrich,
H. Aihara,
R. Akutsu,
I. Alekseev,
A. Ali,
F. Ameli,
I. Anghel,
L. H. V. Anthony,
M. Antonova,
A. Araya,
Y. Asaoka,
Y. Ashida,
V. Aushev,
F. Ballester,
I. Bandac,
M. Barbi,
G. J. Barker,
G. Barr,
M. Batkiewicz-Kwasniak,
M. Bellato,
V. Berardi,
M. Bergevin
, et al. (478 additional authors not shown)
Abstract:
Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-colla…
▽ More
Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-collapse supernovae is not yet well understood. Hyper-Kamiokande is a next-generation neutrino detector that will be able to observe the neutrino flux from the next galactic core-collapse supernova in unprecedented detail. We focus on the first 500 ms of the neutrino burst, corresponding to the accretion phase, and use a newly-developed, high-precision supernova event generator to simulate Hyper-Kamiokande's response to five different supernova models. We show that Hyper-Kamiokande will be able to distinguish between these models with high accuracy for a supernova at a distance of up to 100 kpc. Once the next galactic supernova happens, this ability will be a powerful tool for guiding simulations towards a precise reproduction of the explosion mechanism observed in nature.
△ Less
Submitted 20 July, 2021; v1 submitted 13 January, 2021;
originally announced January 2021.
-
The Hyper-Kamiokande Experiment -- Snowmass LOI
Authors:
Hyper-Kamiokande Collaboration,
:,
K. Abe,
P. Adrich,
H. Aihara,
R. Akutsu,
I. Alekseev,
A. Ali,
F. Ameli,
L. H. V. Anthony,
A. Araya,
Y. Asaoka,
V. Aushev,
I. Bandac,
M. Barbi,
G. Barr,
M. Batkiewicz-Kwasniak,
M. Bellato,
V. Berardi,
L. Bernard,
E. Bernardini,
L. Berns,
S. Bhadra,
J. Bian,
A. Blanchet
, et al. (366 additional authors not shown)
Abstract:
Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiduc…
▽ More
Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiducial volume make the detector unique, that is expected to acquire an unprecedented exposure of 3.8~Mton$\cdot$year over a period of 20~years of operation. Hyper-Kamiokande combines an extremely diverse science program including nucleon decays, long-baseline neutrino oscillations, atmospheric neutrinos, and neutrinos from astrophysical origins. The scientific scope of this program is highly complementary to liquid-argon detectors for example in sensitivity to nucleon decay channels or supernova detection modes. Hyper-Kamiokande construction has started in early 2020 and the experiment is expected to start operations in 2027. The Hyper-Kamiokande collaboration is presently being formed amongst groups from 19 countries including the United States, whose community has a long history of making significant contributions to the neutrino physics program in Japan. US physicists have played leading roles in the Kamiokande, Super-Kamiokande, EGADS, K2K, and T2K programs.
△ Less
Submitted 1 September, 2020;
originally announced September 2020.
-
Large-area printing of ferroelectric surface and super-domains for efficient solar water splitting
Authors:
Yu Tian,
Yaqing Wei,
Minghui Pei,
Rongrong Cao,
Zhenao Gu,
Jing Wang,
Kunhui Liu,
Dashan Shang,
Jiebin Niu,
Xiaoqiang An,
Run Long,
Jinxing Zhang
Abstract:
Surface electronic structures of the photoelectrodes determine the activity and efficiency of the photoelectrochemical water splitting, but the controls of their surface structures and interfacial chemical reactions remain challenging. Here, we use ferroelectric BiFeO3 as a model system to demonstrate an efficient and controllable water splitting reaction by large-area constructing the hydroxyls-b…
▽ More
Surface electronic structures of the photoelectrodes determine the activity and efficiency of the photoelectrochemical water splitting, but the controls of their surface structures and interfacial chemical reactions remain challenging. Here, we use ferroelectric BiFeO3 as a model system to demonstrate an efficient and controllable water splitting reaction by large-area constructing the hydroxyls-bonded surface. The up-shift of band edge positions at this surface enables and enhances the interfacial holes and electrons transfer through the hydroxyl-active-sites, leading to simultaneously enhanced oxygen and hydrogen evolutions. Furthermore, printing of ferroelectric super-domains with microscale checkboard up/down electric fields separates the distribution of reduction/oxidation catalytic sites, enhancing the charge separation and giving rise to an order of magnitude increase of the photocurrent. This large-area printable ferroelectric surface and super-domains offer an alternative platform for controllable and high-efficient photocatalysis.
△ Less
Submitted 28 August, 2020;
originally announced August 2020.
-
Hysteresis curves reveal the microscopic origin of cooperative CO$_2$ adsorption in diamine-appended metal-organic frameworks
Authors:
John R. Edison,
Rebecca L. Siegelman,
Zdenek Preisler,
Joyjit Kundu,
Jeffrey R. Long,
Stephen Whitelam
Abstract:
Diamine-appended metal{organic frameworks (MOFs) of the form Mg2(dobpdc)(diamine)2 adsorb CO2 in a cooperative fashion, exhibiting an abrupt change in CO2 occupancy with pressure or temperature. This change is accompanied by hysteresis. While hysteresis is suggestive of a firstorder phase transition, we show that hysteretic temperature-occupancy curves associated with this material are qualitative…
▽ More
Diamine-appended metal{organic frameworks (MOFs) of the form Mg2(dobpdc)(diamine)2 adsorb CO2 in a cooperative fashion, exhibiting an abrupt change in CO2 occupancy with pressure or temperature. This change is accompanied by hysteresis. While hysteresis is suggestive of a firstorder phase transition, we show that hysteretic temperature-occupancy curves associated with this material are qualitatively unlike the curves seen in the presence of a phase transition; they are instead consistent with CO2 chain polymerization, within one-dimensional channels in the MOF, in the absence of a phase transition. Our simulations of a microscopic model reproduce this dynamics, and point the way toward rational control, in and out of equilibrium, of cooperative adsorption in this industrially important class of materials.
△ Less
Submitted 11 October, 2020; v1 submitted 25 April, 2020;
originally announced April 2020.
-
Overlapping two standing-waves in a microcavity for a multi-atom photon interface
Authors:
Sébastien Garcia,
Francesco Ferri,
Jakob Reichel,
Romain Long
Abstract:
We develop a light-matter interface enabling strong and uniform coupling between a chain of cold atoms and photons of an optical cavity. This interface is a fiber Fabry-Perot cavity, doubly resonant for both the wavelength of the atomic transition and for a geometrically commensurate red-detuned intracavity trapping lattice. Fulfilling the condition of a strong and uniform atom-photon coupling req…
▽ More
We develop a light-matter interface enabling strong and uniform coupling between a chain of cold atoms and photons of an optical cavity. This interface is a fiber Fabry-Perot cavity, doubly resonant for both the wavelength of the atomic transition and for a geometrically commensurate red-detuned intracavity trapping lattice. Fulfilling the condition of a strong and uniform atom-photon coupling requires optimization of the spatial overlap between the two standing waves in the cavity. In a strong-coupling cavity, where the mode waists and Rayleigh range are small, we derive the expression of the optimal trapping wavelength taking into account the Gouy phase. The main parameter controlling the overlap of the standing waves is the relative phase shift at the reflection on the cavity mirrors between the two wavelengths, for which we derive the optimal value. We have built a microcavity optimized according to these results, employing custom-made mirrors with engineered reflection phase for both wavelengths. We present a method to measure with high precision the relative phase shift at reflection, which allows us to determine the spatial overlap of the two modes in this cavity.
△ Less
Submitted 5 March, 2020;
originally announced March 2020.
-
Mapping standing-wave cavity modes with a commercial scanning near-field microscope tip
Authors:
Francesco Ferri,
Sébastien Garcia,
Mohamed Baghdad,
Jakob Reichel,
Romain Long
Abstract:
We describe a method to map the standing-wave pattern inside a Fabry-Perot optical cavity with sub-wavelength resolution by perturbing it with a commercially available scanning near-field optical microscope (SNOM) tip. The method is applied to a fiber Fabry-Perot microcavity. We demonstrate its use to determine the relative position of the antinodes at two different wavelengths. In addition, we us…
▽ More
We describe a method to map the standing-wave pattern inside a Fabry-Perot optical cavity with sub-wavelength resolution by perturbing it with a commercially available scanning near-field optical microscope (SNOM) tip. The method is applied to a fiber Fabry-Perot microcavity. We demonstrate its use to determine the relative position of the antinodes at two different wavelengths. In addition, we use the SNOM tip as a point-like source allowing precise positioning of a microscope objective with respect to the cavity mode.
△ Less
Submitted 12 November, 2019;
originally announced November 2019.
-
J-PARC Neutrino Beamline Upgrade Technical Design Report
Authors:
K. Abe,
H. Aihara,
A. Ajmi,
C. Alt,
C. Andreopoulos,
M. Antonova,
S. Aoki,
Y. Asada,
Y. Ashida,
A. Atherton,
E. Atkin,
S. Ban,
F. C. T. Barbato,
M. Barbi,
G. J. Barker,
G. Barr,
M. Batkiewicz,
A. Beloshapkin,
V. Berardi,
L. Berns,
S. Bhadra,
J. Bian,
S. Bienstock,
A. Blondel,
S. Bolognesi
, et al. (360 additional authors not shown)
Abstract:
In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neut…
▽ More
In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neutrino beam intensity, which are necessary to achieve the proposed data increase, are described.
△ Less
Submitted 14 August, 2019;
originally announced August 2019.
-
Tunable Giant Exchange Bias in an Intercalated Transition Metal Dichalcogenide
Authors:
Spencer Doyle,
Caolan John,
Eran Maniv,
Ryan A. Murphy,
Ariel Maniv,
Sanath K. Ramakrishna,
Yun-Long Tang,
Ramamoorthy Ramesh,
Jeffrey R. Long,
Arneil P. Reyes,
James G. Analytis
Abstract:
The interplay of symmetry and quenched disorder leads to some of the most fundamentally interesting and technologically important properties of correlated materials. It also poses the most vexing of theoretical challenges. Nowhere is this more apparent than in the study of spin glasses. A spin glass is characterized by an ergodic landscape of states - an innumerable number of possibilities that ar…
▽ More
The interplay of symmetry and quenched disorder leads to some of the most fundamentally interesting and technologically important properties of correlated materials. It also poses the most vexing of theoretical challenges. Nowhere is this more apparent than in the study of spin glasses. A spin glass is characterized by an ergodic landscape of states - an innumerable number of possibilities that are only weakly distinguished energetically, if at all. We show in the material Fe$_x$NbS$_2$, this landscape of states can be biased by coexisitng antiferromagnetic order. This process leads to a phenomenon of broad technological importance: giant, tunable exchange bias. We observe exchange biases that exceed those of conventional materials by more than two orders of magnitude. This work illustrates a novel route to giant exchange bias by leveraging the interplay of frustration and disorder in exotic materials.
△ Less
Submitted 11 April, 2019;
originally announced April 2019.
-
Research and Development for Near Detector Systems Towards Long Term Evolution of Ultra-precise Long-baseline Neutrino Experiments
Authors:
Aysel Kayis Topaksu,
Edward Blucher,
Bernard Andrieu,
Jianming Bian,
Byron Roe,
Glenn Horton-Smith,
Yoshinari Hayato,
Juan Antonio Caballero,
James Sinclair,
Yury Kudenko,
Laura Patrizi,
Luca Stanco,
Matteo Tenti,
Guilermo Daniel Megias,
Natalie Jachowicz,
Omar Benhar,
Giulia Ricciardi,
Stefan Roth,
Steven Manly,
Mario Stipcevi,
Davide Meloni,
Ignacio Ruiz,
Jan Sobczyk,
Luis Alvarez-Ruso,
Marco Martini
, et al. (89 additional authors not shown)
Abstract:
With the discovery of non-zero value of $θ_{13}$ mixing angle, the next generation of long-baseline neutrino (LBN) experiments offers the possibility of obtaining statistically significant samples of muon and electron neutrinos and anti-neutrinos with large oscillation effects. In this document we intend to highlight the importance of Near Detector facilities in LBN experiments to both constrain t…
▽ More
With the discovery of non-zero value of $θ_{13}$ mixing angle, the next generation of long-baseline neutrino (LBN) experiments offers the possibility of obtaining statistically significant samples of muon and electron neutrinos and anti-neutrinos with large oscillation effects. In this document we intend to highlight the importance of Near Detector facilities in LBN experiments to both constrain the systematic uncertainties affecting oscillation analyses but also to perform, thanks to their close location, measurements of broad benefit for LBN physics goals. A strong European contribution to these efforts is possible.
△ Less
Submitted 14 January, 2019;
originally announced January 2019.
-
T2K ND280 Upgrade -- Technical Design Report
Authors:
K. Abe,
H. Aihara,
A. Ajmi,
C. Andreopoulos,
M. Antonova,
S. Aoki,
Y. Asada,
Y. Ashida,
A. Atherton,
E. Atkin,
D. Attié,
S. Ban,
M. Barbi,
G. J. Barker,
G. Barr,
M. Batkiewicz,
A. Beloshapkin,
V. Berardi,
L. Berns,
S. Bhadra,
J. Bian,
S. Bienstock,
A. Blondel,
J. Boix,
S. Bolognesi
, et al. (359 additional authors not shown)
Abstract:
In this document, we present the Technical Design Report of the Upgrade of the T2K Near Detector ND280. The goal of this upgrade is to improve the Near Detector performance to measure the neutrino interaction rate and to constrain the neutrino interaction cross-sections so that the uncertainty in the number of predicted events at Super-Kamiokande is reduced to about 4%. This will allow to improve…
▽ More
In this document, we present the Technical Design Report of the Upgrade of the T2K Near Detector ND280. The goal of this upgrade is to improve the Near Detector performance to measure the neutrino interaction rate and to constrain the neutrino interaction cross-sections so that the uncertainty in the number of predicted events at Super-Kamiokande is reduced to about 4%. This will allow to improve the physics reach of the T2K-II project. This goal is achieved by modifying the upstream part of the detector, adding a new highly granular scintillator detector (Super-FGD), two new TPCs (High-Angle TPC) and six TOF planes. Details about the detector concepts, design and construction methods are presented, as well as a first look at the test-beam data taken in Summer 2018. An update of the physics studies is also presented.
△ Less
Submitted 14 October, 2020; v1 submitted 11 January, 2019;
originally announced January 2019.
-
Dual-wavelength fiber Fabry-Perot cavities with engineered birefringence
Authors:
Sébastien Garcia,
Francesco Ferri,
Konstantin Ott,
Jakob Reichel,
Romain Long
Abstract:
We present a method to engineer the frequency splitting of polarization eigenmodes in fiber Fabry-Perot (FFP) cavities. Using specific pattern of multiple CO$_2$ laser pulses, we machine paraboloidal micromirrors with controlled elliptical shape in a large range of radius of curvature. This method is versatile and can be used to produce cavities with maximized or near-zero polarization mode splitt…
▽ More
We present a method to engineer the frequency splitting of polarization eigenmodes in fiber Fabry-Perot (FFP) cavities. Using specific pattern of multiple CO$_2$ laser pulses, we machine paraboloidal micromirrors with controlled elliptical shape in a large range of radius of curvature. This method is versatile and can be used to produce cavities with maximized or near-zero polarization mode splitting. In addition, we realize dual-wavelength FFP cavities with finesse exceeding $40\,000$ at 780$\,$nm and at 1559$\,$nm in the telecom range. We provide direct evidence that the birefringent frequency splitting in FFP cavities is governed only by the geometrical shape of the mirrors, and that the astigmatism of the cavity modes needs to be taken into account for specific cavities.
△ Less
Submitted 10 May, 2018;
originally announced May 2018.
-
A Co(II)-based Molecular Magnet with a 6 T Coercive Field
Authors:
Xiaoqing Liu,
Xiaowen Feng,
Yuan Zhang,
Xuejing Zhang,
Chen Gao,
Jun-Liang Liu,
Bing-Wu Wang,
Kasper S. Pedersen,
Lukas Keller,
Yi-Quan Zhang,
Wei Shi,
Song Gao,
Peng Cheng,
Jeffrey R. Long
Abstract:
Hard magnets with high coercivity, such as Nd2Fe14B and SmCo5 alloys, can maintain magnetisation under a high reverse external magnetic field and have therefore become irreplaceable parts in many practical applications. Molecular magnets are promising alternatives, owing to their precise and designable chemical structures, tuneable functionalities and controllable synthetic methods. Here, we demon…
▽ More
Hard magnets with high coercivity, such as Nd2Fe14B and SmCo5 alloys, can maintain magnetisation under a high reverse external magnetic field and have therefore become irreplaceable parts in many practical applications. Molecular magnets are promising alternatives, owing to their precise and designable chemical structures, tuneable functionalities and controllable synthetic methods. Here, we demonstrate that an unusually large coercive field can be achieved in a single-chain magnet. Systematic characterisations, including magnetic susceptibility, heat capacity and neutron diffraction measurements, show that the observed giant coercive field originates from the spin dynamics along the one-dimensional chain of the compound because of the strong exchange coupling between Co(II) centres and radicals.
△ Less
Submitted 29 September, 2017; v1 submitted 22 September, 2017;
originally announced September 2017.
-
Compensating fictitious magnetic field gradients in optical microtraps by using elliptically polarized dipole light
Authors:
Sébastien Garcia,
Jakob Reichel,
Romain Long
Abstract:
Tightly focused optical dipole traps induce vector light shifts ("fictitious magnetic fields") which complicate their use for single-atom trapping and manipulation. The problem can be mitigated by adding a larger, real magnetic field, but this solution is not always applicable; in particular, it precludes fast switching to a field-free configuration. Here we show that this issue can be addressed e…
▽ More
Tightly focused optical dipole traps induce vector light shifts ("fictitious magnetic fields") which complicate their use for single-atom trapping and manipulation. The problem can be mitigated by adding a larger, real magnetic field, but this solution is not always applicable; in particular, it precludes fast switching to a field-free configuration. Here we show that this issue can be addressed elegantly by deliberately adding a small elliptical polarization component to the dipole beam. In our experiments with single $^{87}$Rb atoms in a chopped trap, we observe improvements up to a factor 11 of the trap lifetime compared to the standard, seemingly ideal linear polarization. This effect results from a modification of heating processes via spin-state diffusion in state-dependent trapping potentials. We develop Monte-Carlo simulations of the evolution of the atom's internal and motional states and find that they agree quantitatively with the experimental data. The method is general and can be applied in all experiments where the longitudinal polarization component is non-negligible.
△ Less
Submitted 12 September, 2017;
originally announced September 2017.
-
Roadmap for the international, accelerator-based neutrino programme
Authors:
J. Cao,
A. de Gouvea,
D. Duchesneau,
S. Geer,
R. Gomes,
S. B. Kim,
T. Kobayashi,
K. R. Long,
M. Maltoni,
M. Mezzetto,
N. Mondal,
M. Shiozawa,
J. Sobczyk,
H. A. Tanaka,
M. Wascko,
G. Zeller
Abstract:
In line with its terms of reference the ICFA Neutrino Panel has developed a roadmapfor the international, accelerator-based neutrino programme. A "roadmap discussion document" was presented in May 2016 taking into account the peer-group-consultation described in the Panel's initial report. The "roadmap discussion document" was used to solicit feedback from the neutrino community---and more broadly…
▽ More
In line with its terms of reference the ICFA Neutrino Panel has developed a roadmapfor the international, accelerator-based neutrino programme. A "roadmap discussion document" was presented in May 2016 taking into account the peer-group-consultation described in the Panel's initial report. The "roadmap discussion document" was used to solicit feedback from the neutrino community---and more broadly, the particle- and astroparticle-physics communities---and the various stakeholders in the programme. The roadmap, the conclusions and recommendations presented in this document take into account the comments received following the publication of the roadmap discussion document.
With its roadmap the Panel documents the approved objectives and milestones of the experiments that are presently in operation or under construction. Approval, construction and exploitation milestones are presented for experiments that are being considered for approval. The timetable proposed by the proponents is presented for experiments that are not yet being considered formally for approval. Based on this information, the evolution of the precision with which the critical parameters governinger the neutrino are known has been evaluated. Branch or decision points have been identified based on the anticipated evolution in precision. The branch or decision points have in turn been used to identify desirable timelines for the neutrino-nucleus cross section and hadro-production measurements that are required to maximise the integrated scientific output of the programme. The branch points have also been used to identify the timeline for the R&D required to take the programme beyond the horizon of the next generation of experiments. The theory and phenomenology programme, including nuclear theory, required to ensure that maximum benefit is derived from the experimental programme is also discussed.
△ Less
Submitted 26 April, 2017;
originally announced April 2017.
-
The design and performance of an improved target for MICE
Authors:
C. N. Booth,
P. Hodgson,
J. Langlands,
E. Overton,
M. Robinson,
P. J. Smith,
G. Barber,
K. R. Long,
B. Shepherd,
E. Capocci,
C. MacWaters,
J. Tarrant
Abstract:
The linear motor driving the target for the Muon Ionisation Cooling Experiment has been redesigned to improve its reliability and performance. A new coil-winding technique is described which produces better magnetic alignment and improves heat transport out of the windings. Improved field-mapping has allowed the more precise construction to be demonstrated, and an enhanced controller exploits the…
▽ More
The linear motor driving the target for the Muon Ionisation Cooling Experiment has been redesigned to improve its reliability and performance. A new coil-winding technique is described which produces better magnetic alignment and improves heat transport out of the windings. Improved field-mapping has allowed the more precise construction to be demonstrated, and an enhanced controller exploits the full features of the hardware, enabling increased acceleration and precision. The new user interface is described and analysis of performance data to monitor friction is shown to allow quality control of bearings and a measure of the ageing of targets during use.
△ Less
Submitted 23 March, 2016;
originally announced March 2016.
-
Millimeter-long Fiber Fabry-Perot cavities
Authors:
Konstantin Ott,
Sebastien Garcia,
Ralf Kohlhaas,
Klemens Schüppert,
Peter Rosenbusch,
Romain Long,
Jakob Reichel
Abstract:
We demonstrate fiber Fabry-Perot (FFP) cavities with concave mirrors that can be operated at cavity lengths as large as 1.5mm without significant deterioration of the finesse. This is achieved by using a laser dot machining technique to shape spherical mirrors with ultralow roughness and employing single-mode fibers with large mode area for good mode matching to the cavity. Additionally, in contra…
▽ More
We demonstrate fiber Fabry-Perot (FFP) cavities with concave mirrors that can be operated at cavity lengths as large as 1.5mm without significant deterioration of the finesse. This is achieved by using a laser dot machining technique to shape spherical mirrors with ultralow roughness and employing single-mode fibers with large mode area for good mode matching to the cavity. Additionally, in contrast to previous FFPs, these cavities can be used over an octave-spanning frequency range with adequate coatings. We also show directly that shape deviations caused by the fiber's index profile lead to a finesse decrease as observed in earlier attempts to build long FFP cavities, and show a way to overcome this problem.
△ Less
Submitted 15 March, 2016;
originally announced March 2016.
-
Maximum work for Carnot-like heat engines with infinite heat source
Authors:
Rui Long,
Wei Liu
Abstract:
An analysis of efficiency and its bounds at maximum work output for Carnot-like heat engines is conducted. The heat transfer processes are described by the linear law with time-dependent heat conductance. The upper bound of efficiency is found to be the CA efficiency,and is independent of the time duration completing each process and the time-dependent conductance. We prove that even the working m…
▽ More
An analysis of efficiency and its bounds at maximum work output for Carnot-like heat engines is conducted. The heat transfer processes are described by the linear law with time-dependent heat conductance. The upper bound of efficiency is found to be the CA efficiency,and is independent of the time duration completing each process and the time-dependent conductance. We prove that even the working medium exchanges heat sufficiently with the heat reservoirs, the work which could be extracted is finite and limited. The optimal temperature profiles in the heat exchanging processes are also analyzed. When the dimensionless contact times satisfy certain relations,the endoreversible model is recovered.
△ Less
Submitted 3 June, 2014;
originally announced June 2014.
-
Fiber-pigtailed optical tweezer for single-atom trapping and single-photon generation
Authors:
Sébastien Garcia,
Dominik Maxein,
Leander Hohmann,
Jakob Reichel,
Romain Long
Abstract:
We demonstrate a miniature, fiber-coupled optical tweezer to trap a single atom. The same fiber is used to trap a single atom and to read out its fluorescence. To obtain a low background level, the tweezer light is chopped, and we measure the influence of the chopping frequency on the atom's lifetime. We use the single atom as a single-photon source at 780 nm and measure the second-order correlati…
▽ More
We demonstrate a miniature, fiber-coupled optical tweezer to trap a single atom. The same fiber is used to trap a single atom and to read out its fluorescence. To obtain a low background level, the tweezer light is chopped, and we measure the influence of the chopping frequency on the atom's lifetime. We use the single atom as a single-photon source at 780 nm and measure the second-order correlation function of the emitted photons. Because of its miniature, robust, fiber-pigtailed design, this tweezer can be implemented in a broad range of experiments where single atoms are used as a resource.
△ Less
Submitted 14 October, 2013;
originally announced October 2013.
-
Neutrinos from Stored Muons nuSTORM: Expression of Interest
Authors:
D. Adey,
S. K. Agarwalla,
C. M. Ankenbrandt,
R. Asfandiyarov,
J. J. Back,
G. Barker,
E. Baussan,
R. Bayes,
S. Bhadra,
V. Blackmore,
A. Blondel,
S. A. Bogacz,
C. Booth,
S. B. Boyd,
A. Bravar,
S. J. Brice,
A. D. Bross,
F. Cadoux,
H. Cease,
A. Cervera,
J. Cobb,
D. Colling,
L. Coney,
A. Dobbs,
J. Dobson
, et al. (84 additional authors not shown)
Abstract:
The nuSTORM facility has been designed to deliver beams of electron and muon neutrinos from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum spread of 10%. The facility is unique in that it will: serve the future long- and short-baseline neutrino-oscillation programmes by providing definitive measurements of electron-neutrino- and muon-neutrino-nucleus cross sect…
▽ More
The nuSTORM facility has been designed to deliver beams of electron and muon neutrinos from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum spread of 10%. The facility is unique in that it will: serve the future long- and short-baseline neutrino-oscillation programmes by providing definitive measurements of electron-neutrino- and muon-neutrino-nucleus cross sections with percent-level precision; allow searches for sterile neutrinos of exquisite sensitivity to be carried out; and constitute the essential first step in the incremental development of muon accelerators as a powerful new technique for particle physics.
Of the world's proton-accelerator laboratories, only CERN and FNAL have the infrastructure required to mount nuSTORM. Since no siting decision has yet been taken, the purpose of this Expression of Interest (EoI) is to request the resources required to: investigate in detail how nuSTORM could be implemented at CERN; and develop options for decisive European contributions to the nuSTORM facility and experimental programme wherever the facility is sited.
The EoI defines a two-year programme culminating in the delivery of a Technical Design Report.
△ Less
Submitted 7 May, 2013;
originally announced May 2013.
-
The design, construction and performance of the MICE target
Authors:
C. N. Booth,
P. Hodgson,
L. Howlett,
R. Nicholson,
E. Overton,
M. Robinson,
P. J. Smith,
M. Apollonio,
G. Barber,
A. Dobbs,
J. Leaver,
K. R. Long,
B. Shepherd,
D. Adams,
E. Capocci,
E. McCarron,
J. Tarrant
Abstract:
The pion-production target that serves the MICE Muon Beam consists of a titanium cylinder that is dipped into the halo of the ISIS proton beam. The design and construction of the MICE target system are described along with the quality-assurance procedures, electromagnetic drive and control systems, the readout electronics, and the data-acquisition system. The performance of the target is presented…
▽ More
The pion-production target that serves the MICE Muon Beam consists of a titanium cylinder that is dipped into the halo of the ISIS proton beam. The design and construction of the MICE target system are described along with the quality-assurance procedures, electromagnetic drive and control systems, the readout electronics, and the data-acquisition system. The performance of the target is presented together with the particle rates delivered to the MICE Muon Beam. Finally, the beam loss in ISIS generated by the operation of the target is evaluated as a function of the particle rate, and the operating parameters of the target are derived.
△ Less
Submitted 6 March, 2013; v1 submitted 27 November, 2012;
originally announced November 2012.
-
Topology of Classical Molecular Optimal Control Landscapes in Phase Space
Authors:
Carlee Joe-Wong,
Tak-San Ho,
Ruixing Long,
Herschel Rabitz,
Rebing Wu
Abstract:
Optimal control of molecular dynamics is commonly expressed from a quantum mechanical perspective. However, in most contexts the preponderance of molecular dynamics studies utilize classical mechanical models. This paper treats laser-driven optimal control of molecular dynamics in a classical framework. We consider the objective of steering a molecular system from an initial point in phase space t…
▽ More
Optimal control of molecular dynamics is commonly expressed from a quantum mechanical perspective. However, in most contexts the preponderance of molecular dynamics studies utilize classical mechanical models. This paper treats laser-driven optimal control of molecular dynamics in a classical framework. We consider the objective of steering a molecular system from an initial point in phase space to a target point, subject to the dynamic constraint of Hamilton's equations. The classical control landscape corresponding to this objective is a functional of the control field, and the topology of the landscape is analyzed through its gradient and Hessian with respect to the control. Under specific assumptions on the regularity of the control fields, the classical control landscape is found to be free of traps that could hinder reaching the objective. The Hessian associated with an optimal control field is shown to have finite rank, indicating the presence of an inherent degree of robustness to control noise. Extensive numerical simulations are performed to illustrate the theoretical principles on a) a model diatomic molecule, b) two coupled Morse oscillators, and c) a chaotic system with a coupled quartic oscillator, confirming the absence of traps in the classical control landscape. We compare the classical formulation with the mathematically analogous state-to-state transition probability control landscape of N-level quantum systems. The absence of traps in both circumstances provides a broader basis to understand the growing number of successful control experiments with complex molecules, which can have dynamics that transcend the classical and quantum regimes.
△ Less
Submitted 29 April, 2013; v1 submitted 18 August, 2011;
originally announced August 2011.
-
Comment on "Are There Traps in Quantum Control Landscapes?"
Authors:
Herschel Rabitz,
Tak-San Ho,
Ruixing Long,
Rebing Wu,
Constantin Brif
Abstract:
Many quantum control problems are formulated as a search for an optimal field that maximizes a physical objective. This search is performed over a landscape defined as the objective as a function of the control field. A recent Letter [A. N. Pechen and D. J. Tannor, Phys. Rev. Lett. 106, 120402 (2011)] asserts that the existence of special landscape critical points (CPs) with trapping characteristi…
▽ More
Many quantum control problems are formulated as a search for an optimal field that maximizes a physical objective. This search is performed over a landscape defined as the objective as a function of the control field. A recent Letter [A. N. Pechen and D. J. Tannor, Phys. Rev. Lett. 106, 120402 (2011)] asserts that the existence of special landscape critical points (CPs) with trapping characteristics is "contrary to recent claims in the literature" and "can have profound implications for both theoretical and experimental quantum control studies." We show here that these assertions are inaccurate and misleading.
△ Less
Submitted 8 May, 2012; v1 submitted 12 May, 2011;
originally announced May 2011.
-
The design, construction and performance of the MICE scintillating fibre trackers
Authors:
M. Ellis,
P. R. Hobson,
P. Kyberd,
J. J. Nebrensky,
A. Bross,
J. Fagan,
T. Fitzpatrick,
R. Flores,
R. Kubinski,
J. Krider,
R. Rucinski,
P. Rubinov,
C. Tolian,
T. L. Hart,
D. M. Kaplan,
W. Luebke,
B. Freemire,
M. Wojcik,
G. Barber,
D. Clark,
I. Clark,
P. J. Dornan,
A. Fish,
S. Greenwood,
R. Hare
, et al. (27 additional authors not shown)
Abstract:
Charged-particle tracking in the international Muon Ionisation Cooling Experiment (MICE) will be performed using two solenoidal spectrometers, each instrumented with a tracking detector based on 350 μm diameter scintillating fibres. The design and construction of the trackers is described along with the quality-assurance procedures, photon-detection system, readout electronics, reconstruction and…
▽ More
Charged-particle tracking in the international Muon Ionisation Cooling Experiment (MICE) will be performed using two solenoidal spectrometers, each instrumented with a tracking detector based on 350 μm diameter scintillating fibres. The design and construction of the trackers is described along with the quality-assurance procedures, photon-detection system, readout electronics, reconstruction and simulation software and the data-acquisition system. Finally, the performance of the MICE tracker, determined using cosmic rays, is presented.
△ Less
Submitted 11 July, 2010; v1 submitted 19 May, 2010;
originally announced May 2010.
-
Multi-directional sorting modes in deterministic lateral displacement devices
Authors:
Brian R. Long,
Martin Heller,
Jason P. Beech,
Heiner Linke,
Henrik Bruus,
Jonas O. Tegenfeldt
Abstract:
Deterministic lateral displacement (DLD) devices separate micrometer-scale particles in solution based on their size using a laminar microfluidic flow in an array of obstacles. We investigate array geometries with rational row-shift fractions in DLD devices by use of a simple model including both advection and diffusion. Our model predicts novel multi-directional sorting modes that could be expe…
▽ More
Deterministic lateral displacement (DLD) devices separate micrometer-scale particles in solution based on their size using a laminar microfluidic flow in an array of obstacles. We investigate array geometries with rational row-shift fractions in DLD devices by use of a simple model including both advection and diffusion. Our model predicts novel multi-directional sorting modes that could be experimentally tested in high-throughput DLD devices containing obstacles that are much smaller than the separation between obstacles.
△ Less
Submitted 25 July, 2008;
originally announced July 2008.
-
Frequency tuning of the whispering gallery modes of silica microspheres for CQED and spectroscopy
Authors:
Wolf von Klitzing,
Romain Long,
Vladimir S. Ilchenko,
Jean Hare,
Valerie Lefevre-Seguin
Abstract:
We have tuned the whispering gallery modes of a fused silica microresonator over nearly 1 nm at 800 nm, i.e. over 0.5 FSR or 10^6 linewidths of the resonator. This has been achieved by a new method based on the stretching of a two-stem microsphere. The devices described below will permit new Cavity-QED experiments with this high-Q optical resonator when it is desirable to optimize its coupling t…
▽ More
We have tuned the whispering gallery modes of a fused silica microresonator over nearly 1 nm at 800 nm, i.e. over 0.5 FSR or 10^6 linewidths of the resonator. This has been achieved by a new method based on the stretching of a two-stem microsphere. The devices described below will permit new Cavity-QED experiments with this high-Q optical resonator when it is desirable to optimize its coupling to emitters with given transition frequencies. The tuning capability demonstrated here is compatible with both UHV and low temperature operation, which should be useful for future experiments with laser cooled atoms or single quantum dots.
△ Less
Submitted 2 August, 2000;
originally announced August 2000.
