-
Making the unmodulated pyramid wavefront sensor smart II. First on-sky demonstration of extreme adaptive optics with deep learning
Authors:
R. Landman,
S. Y. Haffert,
J. D. Long,
J. R. Males,
L. M. Close,
W. B. Foster,
K. Van Gorkom,
O. Guyon,
A. D. Hedglen,
P. T. Johnson,
M. Y. Kautz,
J. K. Kueny,
J. Li,
J. Liberman,
J. Lumbres,
E. A. McEwen,
A. McLeod,
L. Schatz,
E. Tonucci,
K. Twitchell
Abstract:
Pyramid wavefront sensors (PWFSs) are the preferred choice for current and future extreme adaptive optics (XAO) systems. Almost all instruments use the PWFS in its modulated form to mitigate its limited linearity range. However, this modulation comes at the cost of a reduction in sensitivity, a blindness to petal-piston modes, and a limit to the sensor's ability to operate at high speeds. Therefor…
▽ More
Pyramid wavefront sensors (PWFSs) are the preferred choice for current and future extreme adaptive optics (XAO) systems. Almost all instruments use the PWFS in its modulated form to mitigate its limited linearity range. However, this modulation comes at the cost of a reduction in sensitivity, a blindness to petal-piston modes, and a limit to the sensor's ability to operate at high speeds. Therefore, there is strong interest to use the PWFS without modulation, which can be enabled with nonlinear reconstructors. Here, we present the first on-sky demonstration of XAO with an unmodulated PWFS using a nonlinear reconstructor based on convolutional neural networks. We discuss the real-time implementation on the Magellan Adaptive Optics eXtreme (MagAO-X) instrument using the optimized TensorRT framework and show that inference is fast enough to run the control loop at >2 kHz frequencies. Our on-sky results demonstrate a successful closed-loop operation using a model calibrated with internal source data that delivers stable and robust correction under varying conditions. Performance analysis reveals that our smart PWFS achieves nearly the same Strehl ratio as the highly optimized modulated PWFS under favorable conditions on bright stars. Notably, we observe an improvement in performance on a fainter star under the influence of strong winds. These findings confirm the feasibility of using the PWFS in its unmodulated form and highlight its potential for next-generation instruments. Future efforts will focus on achieving even higher control loop frequencies (>3 kHz), optimizing the calibration procedures, and testing its performance on fainter stars, where more gain is expected for the unmodulated PWFS compared to its modulated counterpart.
△ Less
Submitted 20 March, 2025;
originally announced March 2025.
-
Three-sided pyramid wavefront sensor. II. Preliminary demonstration on the new CACTI testbed
Authors:
Lauren Schatz,
Johanan Codona,
Joseph D. Long,
Jared R. Males,
Weslin Pullen,
Jennifer Lumbres,
Kyle Van Gorkom,
Vincent Chambouleyron,
Laird M. Close,
Carlos Correia,
Olivier Fauvarque,
Thierry Fusco,
Olivier Guyon,
Michael Hart,
Pierre Janin-Potiron,
Robert Johnson,
Nemanja Jovanovic,
Mala Mateen,
Jean-Francois Sauvage,
Benoit Neichel
Abstract:
The next generation of giant ground and space telescopes will have the light-collecting power to detect and characterize potentially habitable terrestrial exoplanets using high-contrast imaging for the first time. This will only be achievable if the performance of Giant Segmented Mirror Telescopes (GSMTs) extreme adaptive optics (ExAO) systems are optimized to their full potential. A key component…
▽ More
The next generation of giant ground and space telescopes will have the light-collecting power to detect and characterize potentially habitable terrestrial exoplanets using high-contrast imaging for the first time. This will only be achievable if the performance of Giant Segmented Mirror Telescopes (GSMTs) extreme adaptive optics (ExAO) systems are optimized to their full potential. A key component of an ExAO system is the wavefront sensor (WFS), which measures aberrations from atmospheric turbulence. A common choice in current and next-generation instruments is the pyramid wavefront sensor (PWFS). ExAO systems require high spatial and temporal sampling of wavefronts to optimize performance, and as a result, require large detectors for the WFS. We present a closed-loop testbed demonstration of a three-sided pyramid wavefront sensor (3PWFS) as an alternative to the conventional four-sided pyramid wavefront (4PWFS) sensor for GSMT-ExAO applications on the new Comprehensive Adaptive Optics and Coronagraph Test Instrument (CACTI). The 3PWFS is less sensitive to read noise than the 4PWFS because it uses fewer detector pixels. The 3PWFS has further benefits: a high-quality three-sided pyramid optic is easier to manufacture than a four-sided pyramid. We detail the design of the two components of the CACTI system, the adaptive optics simulator and the PWFS testbed that includes both a 3PWFS and 4PWFS. A preliminary experiment was performed on CACTI to study the performance of the 3PWFS to the 4PWFS in varying strengths of turbulence using both the Raw Intensity and Slopes Map signal processing methods. This experiment was repeated for a modulation radius of 1.6 lambda/D and 3.25 lambda/D. We found that the performance of the two wavefront sensors is comparable if modal loop gains are tuned.
△ Less
Submitted 7 October, 2022;
originally announced October 2022.
-
Experimental Trials With The Optical Differentiation Wavefront Sensor For Extended Objects
Authors:
Meghan Farris O'Brien,
Sebastiaan Y. Haffert,
Joseph D. Long,
Lauren Schatz,
Jared R. Males,
Kyle Van Gorkom,
Alex Rodack
Abstract:
Commonly used wavefront sensors, the Shack Hartmann wavefront sensor and the pyramid wavefront sensor, for example, have large dynamic range or high sensitivity, trading one regime for the other. A new type of wavefront sensor is being developed and is currently undergoing testing at the University of Arizona's Center for Astronomical Adaptive Optics. This sensor builds on linear optical different…
▽ More
Commonly used wavefront sensors, the Shack Hartmann wavefront sensor and the pyramid wavefront sensor, for example, have large dynamic range or high sensitivity, trading one regime for the other. A new type of wavefront sensor is being developed and is currently undergoing testing at the University of Arizona's Center for Astronomical Adaptive Optics. This sensor builds on linear optical differentiation theory by using linear, spatially varying halfwave plates in an intermediate focal plane. These filters, along with the polarizing beam splitters, divide the beam into four pupil images, similar to those produced by the pyramid wavefront sensor. The wavefront is then reconstructed from the local wavefront slope information contained in these images. The ODWFS is ideally suited for wavefront sensing on extended objects because of its large dynamic range and because it operates in a pupil plane which allows for on chip resampling even for arbitrarily shaped sources. We have assembled the ODWFS on a testbed using 32 by 32 square 1000 actuator deformable mirror to introduce aberration into a simulated telescope beam. We are currently testing the system's spatial frequency response and are comparing the resulting data to numerical simulations. This paper presents the results of these initial experiments.
△ Less
Submitted 17 August, 2022;
originally announced August 2022.
-
Cooling and Timing tests of the ATLAS Fast Tracker VME boards
Authors:
S. Sottocornola,
A. Annovi,
N. V. Biesuz,
E. Brost,
M. Calvetti,
C. Gentsos,
T. Holmes,
L. Horyn,
T. Iizawa,
A. Lanza,
J. D. Long,
P. Mastrandrea,
I. Maznas,
A. Negri,
D. Calabro,
M. Piendibene,
C. Roda,
E. Romano,
T. Seiss
Abstract:
The Fast Tracker (FTK) is an ATLAS trigger upgrade built for full event, low-latency, high-rate tracking. The FTK core, made of 9U VME boards, performs the most demanding computational task. The Associative Memory Board Serial Link Processor (AMB) and the Auxiliary card (AUX), plugged on the front and back sides of the same VME slot, constitute the Processing Unit (PU), which finds tracks using hi…
▽ More
The Fast Tracker (FTK) is an ATLAS trigger upgrade built for full event, low-latency, high-rate tracking. The FTK core, made of 9U VME boards, performs the most demanding computational task. The Associative Memory Board Serial Link Processor (AMB) and the Auxiliary card (AUX), plugged on the front and back sides of the same VME slot, constitute the Processing Unit (PU), which finds tracks using hits from 8 layers of the inner detector. The PU works in pipeline with the Second Stage Board (SSB), which finds 12-layer tracks by adding extra hits to the identified tracks. In the designed configuration, 16 PUs and 4 SSBs are installed in a VME crate. The high power-consumption of the AMB, AUX and SSB (respectively of about 250 W, 70 W and 160 W per board) required the development of a custom cooling system. Even though the expected power consumption for each VME crate of the FTK system is high compared to a common VME setup, the 8 FTK core crates will use $\approx$ 60 kW, which is just a fraction of the power and the space needed for a CPU farm performing the same task. We report on the integration of 32 PUs and 8 SSBs inside the FTK system, on the infrastructures needed to run and cool them, and on the tests performed to verify the system processing rate and the temperature stability at a safe value.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
