-
Heat flux deposition pattern on the inner first wall of Tore Supra
Authors:
R Mitteau,
M Chantant,
P Chappuis,
D Guilhem,
M Lipa
Abstract:
The Inner First Wall (IFW) is the main limiter in Tore Supra for long and powerful discharges. The original graphite IFW was partly damaged by 8 years of operation and a sector of 60{\textdegree} was replaced between 1995 and 1997 by CFC brazed elements. They are designed to accept twice as much flux (2 MW/m${}^2$) as the older ones and are expected to be more resilient. The new elements gave the…
▽ More
The Inner First Wall (IFW) is the main limiter in Tore Supra for long and powerful discharges. The original graphite IFW was partly damaged by 8 years of operation and a sector of 60{\textdegree} was replaced between 1995 and 1997 by CFC brazed elements. They are designed to accept twice as much flux (2 MW/m${}^2$) as the older ones and are expected to be more resilient. The new elements gave the opportunity to install diagnostics (thermocouples and langmuir probes) on a poloidal sector, to characterise the behaviour of the new IFW and especially the heat flux profile. The pattern doesn't follow the cosine law and is governed by strong perpendicular heat flux and abnormal deposition at the contact point between the limiter and the plasma. The most energetic shots of the last campaign showed that the IFW could be loaded with twice the power deposited during these shots.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
Non destructive testing of actively cooled plasma facing components by means of thermal transient excitation and infrared imaging
Authors:
R. Mitteau,
S. Berrebi,
P. Chappuis,
Ph. Darses,
A. Dufayet,
L. Garampon,
D. Guilhem,
M. Lipa,
Valérie Martin,
H. Roche
Abstract:
SATIR is a new test-bed installed at Tore Supra to perform non destructive examination of actively cooled plasma facing components. Hot and cold water flow successively in the cooling tube of the component and the surface temperature is recorded with an infrared camera. Defects are detected by a slower temperature response above unbrazed areas. The connection between temperature differences and de…
▽ More
SATIR is a new test-bed installed at Tore Supra to perform non destructive examination of actively cooled plasma facing components. Hot and cold water flow successively in the cooling tube of the component and the surface temperature is recorded with an infrared camera. Defects are detected by a slower temperature response above unbrazed areas. The connection between temperature differences and defect sizes is the main difficulty. It is established by tests of standard defects and thermal transient calculations of defective geometries. SATIR has been in use for two years and has proved to be very valuable to test industrial components as well as prototypes.
△ Less
Submitted 6 October, 2020;
originally announced October 2020.
-
The environment effect on operation of in-vessel mirrors for plasma diagnostics in fusion devices
Authors:
V. S. Voitsenya,
Ch. Gil,
V. G. Konovalov,
A. Litnovsky,
M. Lipa,
M. Rubel,
A. Sagara,
A. Sakasai,
B. Schunke,
T. Sugie,
G. De Temmerman,
K. Yu Vukolov,
S. N. Zvonkov,
P. Wienhold
Abstract:
First mirrors will be the plasma facing components of optical diagnostic systems in ITER. Mirror surfaces will undergo modification caused by erosion and re-deposition processes [1,2]. As a consequence, the mirror performance may be changed and may deteriorate [3,4]. In the divertor region it may also be obscured by deposition [5-7]. The limited access to in-vessel components of ITER calls for t…
▽ More
First mirrors will be the plasma facing components of optical diagnostic systems in ITER. Mirror surfaces will undergo modification caused by erosion and re-deposition processes [1,2]. As a consequence, the mirror performance may be changed and may deteriorate [3,4]. In the divertor region it may also be obscured by deposition [5-7]. The limited access to in-vessel components of ITER calls for testing the mirror materials in present day devices in order to gather information on the material damage and degradation of the mirror performance, i.e. reflectivity. A dedicated experimental programme, First Mirror Test (FMT), has been initiated at the JET tokamak within the framework Tritium Retention Studies (TRS).
△ Less
Submitted 16 November, 2004; v1 submitted 9 November, 2004;
originally announced November 2004.
