Showing 1–8 of 8 results for author: Liang, N

Insight into the effect of force error on the thermal conductivity from machine-learned potentials

Authors: Wenjiang Zhou, Nianjie Liang, Xiguang Wu, Shiyun Xiong, Zheyong Fan, Bai Song

Abstract: Machine-learned potentials (MLPs) have been extensively used to obtain the lattice thermal conductivity via atomistic simulations. However, the impact of force errors in various MLPs on thermal transport has not been widely recognized and remains to be fully understood. Here, we employ MLP-driven molecular dynamics (MD) and anharmonic lattice dynamics (LD) to systematically investigate how the cal… ▽ More Machine-learned potentials (MLPs) have been extensively used to obtain the lattice thermal conductivity via atomistic simulations. However, the impact of force errors in various MLPs on thermal transport has not been widely recognized and remains to be fully understood. Here, we employ MLP-driven molecular dynamics (MD) and anharmonic lattice dynamics (LD) to systematically investigate how the calculated thermal conductivity varies with the force errors, using boron arsenide as a prototypical material. We consistently observe an underestimation of thermal conductivity in MD simulations with three different MLPs including the neuroevolution potential, deep potential, and moment tensor potential. We provide a robust extrapolation scheme based on controlled force noises via the Langevin thermostat to correct this underestimation. The corrected results achieve a good agreement with previous experimental measurement from 200 K to 600 K. In contrast, the thermal conductivity values from LD calculations with MLPs readily align with the experimental data, which is attributed to the much smaller effects of the force errors on the force-constant calculations. △ Less

Submitted 7 November, 2024; originally announced November 2024.

Gaseous Scissor-mediated Electrochemical Exfoliation of Halogenated MXenes and its Boosting in Wear-Resisting Tribovoltaic Devices

Authors: Qi Fan, Minghua Chen, Longyi Li, Minghui Li, Chuanxiao Xiao, Tianci Zhao, Long Pan, Ningning Liang, Qing Huang, Laipan Zhu, Michael Naguib, Kun Liang

Abstract: Two-dimensional transition metal carbides (MXenes), especially their few-layered nanosheets, have triggered burgeoning research attentions owing to their superiorities including extraordinary conductivity, accessible active surface, and adjustable processability. Molten salts etching route further achieves their controllable surface chemistry. However, the method encounters challenges in achieving… ▽ More Two-dimensional transition metal carbides (MXenes), especially their few-layered nanosheets, have triggered burgeoning research attentions owing to their superiorities including extraordinary conductivity, accessible active surface, and adjustable processability. Molten salts etching route further achieves their controllable surface chemistry. However, the method encounters challenges in achieving few-layer structures due to more complex delamination behaviors. Herein, we present an efficient strategy to fabricate Cl- or Br-terminated MXene nanoflakes with few-layers, achieved by electrochemical intercalation of Li ions and concomitant solvent molecules in the electrolyte solution, with gaseous scissors (propylene molecules) to break up interlayer forces. By controlling cut-off voltages, the optimal protocol results in nanosheets with an ultrahigh yield (~93%) and preserved surface chemistry. The resultant MXenes dispersions were employed as lubricants to enhance tribovoltaic nanogenerators, where Ti3C2Br2 displayed superior electrical output. These findings facilitate the understanding of MXenes' intrinsic physical properties and enable the nanoengineering of advanced electronic devices. △ Less

Submitted 14 October, 2024; originally announced October 2024.

Thermal transport in a 2D amorphous material

Authors: Yuxi Wang, Xingxing Zhang, Wujuan Yan, Nianjie Liang, Haiyu He, Xinwei Tao, Ang Li, Fuwei Yang, Buxuan Li, Te-Huan Liu, Jia Zhu, Wu Zhou, Wei Wang, Lin Zhou, Bai Song

Abstract: Two-dimensional (2D) crystals proved revolutionary soon after graphene was discovered in 2004. However, 2D amorphous materials only became accessible in 2020 and remain largely unexplored. In particular, the thermophysical properties of amorphous materials are of great interest upon transition from 3D to 2D. Here, we probe thermal transport in 2D amorphous carbon. A cross-plane thermal conductivit… ▽ More Two-dimensional (2D) crystals proved revolutionary soon after graphene was discovered in 2004. However, 2D amorphous materials only became accessible in 2020 and remain largely unexplored. In particular, the thermophysical properties of amorphous materials are of great interest upon transition from 3D to 2D. Here, we probe thermal transport in 2D amorphous carbon. A cross-plane thermal conductivity ($κ$) down to 0.079 $\rm{Wm}^{-1}K^{-1}$ is measured for van der Waals stacked multilayers at room temperature, which is among the lowest reported to date. Meanwhile, an unexpectedly high in-plane $κ$ is obtained for freestanding monolayers which is a few times larger than what is predicted by conventional wisdom for 3D amorphous carbon with similar $\rm{sp}^{2}$ fraction. Our molecular dynamics simulations reveal the role of disorder and highlight the impact of dimensionality. Amorphous materials at the 2D limit open up new avenues for understanding and manipulating heat at the atomic scale. △ Less

Submitted 22 March, 2024; v1 submitted 20 February, 2024; originally announced February 2024.

Evaluation on characterization of acoustic emission of brittle rocks from the experiment to numerical simulation

Authors: Fengchang Bu, Lei Xue, Mengyang Zhai, Xiaolin Huang, Jinyu Dong, Ning Liang, Chao Xu

Abstract: Acoustic emission (AE) characterization is an effective technique to indirectly capture the progressive failure process of the brittle rock. In previous studies, both the experiment and numerical simulation were adopted to investigate AE characteristics of the brittle rock. However, as the most popular numerical model, the moment tensor model (MTM) did not reproduce the monitoring and analyzing ma… ▽ More Acoustic emission (AE) characterization is an effective technique to indirectly capture the progressive failure process of the brittle rock. In previous studies, both the experiment and numerical simulation were adopted to investigate AE characteristics of the brittle rock. However, as the most popular numerical model, the moment tensor model (MTM) did not reproduce the monitoring and analyzing manner of AE signals from the physical experiment. Consequently, its result could not be constrained by the experimental result. It is thus necessary to evaluate the consistency and compatibility between the experiment and MTM. To fulfill this, we developed a particle-velocity-based model (PVBM) which enabled directly monitor and analyze the particle velocity in the numerical model and had good robustness. The PVBM imitated the actual experiment and could fill in gaps between the experiment and MTM. AE experiments of Marine shale under uniaxial compression were carried out, of which results were simulated by MTM. In general, the variation trend of the experimental result could be presented by MTM. Nevertheless, magnitudes of AE parameters by MTM presented notable differences with more than several orders compared with those by the experiment. We sequentially used PVBM as a proxy to analyze these discrepancies quantitatively and make a systematical evaluation on AE characterization of brittle rocks from the experiment to numerical simulation, considering the influence of wave reflection, energy geometrical diffusion, viscous attenuation, particle size as well as progressive deterioration of rock material. It was suggested that only the combination of MTM and PVBM could reasonably and accurately acquire AE characteristics of the actual AE experiment of brittle rocks by making full use of their respective advantages. △ Less

Submitted 4 August, 2021; v1 submitted 29 July, 2021; originally announced July 2021.

Dual-energy CT Reconstruction from Dual Quarter Scans

Authors: Wenkun Zhang, Ningning Liang, Linyuan Wang, Ailong Cai, Zhizhong Zheng, Chao Tang, Yizhong Wang, Lei Li, Bin Yan, Guoen Hu

Abstract: Compared with conventional single-energy computed tomography (CT), dual-energy CT (DECT) provides better material differentiation but most DECT imaging systems require dual full-angle projection data at different X-ray spectra. Relaxing the requirement of data acquisition is a particularly attractive research to promote the applications of DECT in a wide range of imaging areas. In this work, we de… ▽ More Compared with conventional single-energy computed tomography (CT), dual-energy CT (DECT) provides better material differentiation but most DECT imaging systems require dual full-angle projection data at different X-ray spectra. Relaxing the requirement of data acquisition is a particularly attractive research to promote the applications of DECT in a wide range of imaging areas. In this work, we design a novel DECT imaging scheme with dual quarter scans and propose an efficient method to reconstruct the desired DECT images from dual limited-angle projection data, which enables DECT on imaging configurations with half-scan and largely reduces scanning angles and radiation doses. We first study the characteristics of image artifacts under dual quarter scans scheme, and find that the directional limited-angle artifacts of DECT images are complementarily distributed in image domain because the corresponding X-rays of high- and low-energy scans are orthogonal. Inspired by this finding, a fusion CT image is generated by integrating the limited-angle DECT images of dual quarter scans. This strategy largely reduces the limited-angle artifacts and preserves the image edges and inner structures. Utilizing the capability of neural network in the modeling of nonlinear problem, a novel Anchor network with single-entry double-out architecture is designed in this work to yield the desired DECT images from the generated fusion CT image. Experimental results on the simulated and real data verify the effectiveness of the proposed method. △ Less

Submitted 17 December, 2020; originally announced December 2020.

Generative Adversarial Network-Based Sinogram Super-Resolution for Computed Tomography Imaging

Authors: Chao Tang, Wenkun Zhang, Linyuan Wang, Ailong Cai, Ningning Liang, Lei Li, Bin Yan

Abstract: Compared with the conventional 1*1 acquisition mode of projection in computed tomography (CT) image reconstruction, the 2*2 acquisition mode improves the collection efficiency of the projection and reduces the X-ray exposure time. However, the collected projection based on the 2*2 acquisition mode has low resolution (LR) and the reconstructed image quality is poor, thus limiting the use of this mo… ▽ More Compared with the conventional 1*1 acquisition mode of projection in computed tomography (CT) image reconstruction, the 2*2 acquisition mode improves the collection efficiency of the projection and reduces the X-ray exposure time. However, the collected projection based on the 2*2 acquisition mode has low resolution (LR) and the reconstructed image quality is poor, thus limiting the use of this mode in CT imaging systems. In this study, a novel sinogram-super-resolution generative adversarial network (SSR-GAN) model is proposed to obtain high-resolution (HR) sinograms from LR sinograms, thereby improving the reconstruction image quality under the 2*2 acquisition mode. The proposed generator is based on the residual network for LR sinogram feature extraction and super-resolution (SR) sinogram generation. A relativistic discriminator is designed to render the network capable of obtaining more realistic SR sinograms. Moreover, we combine the cycle consistency loss, sinogram domain loss, and reconstruction image domain loss in the total loss function to supervise SR sinogram generation. Then, a trained model can be obtained by inputting the paired LR/HR sinograms into the network. Finally, the classic FBP reconstruction algorithm is used for CT image reconstruction based on the generated SR sinogram. The qualitative and quantitative results of evaluations on digital and real data illustrate that the proposed model not only obtains clean SR sinograms from noisy LR sinograms but also outperforms its counterparts. △ Less

Submitted 6 August, 2020; originally announced August 2020.

Projection Super-resolution Based on Convolutional Neural Network for Computed Tomography

Authors: Chao Tang, Wenkun Zhang, Ziheng Li, Ailong Cai, Linyuan Wang, Lei Li, Ningning Liang, Bin Yan

Abstract: The improvement of computed tomography (CT) image resolution is beneficial to the subsequent medical diagnosis, but it is usually limited by the scanning devices and great expense. Convolutional neural network (CNN)-based methods have achieved promising ability in super-resolution. However, existing methods mainly focus on the super-resolution of reconstructed image and do not fully explored the a… ▽ More The improvement of computed tomography (CT) image resolution is beneficial to the subsequent medical diagnosis, but it is usually limited by the scanning devices and great expense. Convolutional neural network (CNN)-based methods have achieved promising ability in super-resolution. However, existing methods mainly focus on the super-resolution of reconstructed image and do not fully explored the approach of super-resolution from projection-domain. In this paper, we studied the characteristic of projection and proposed a CNN-based super-resolution method to establish the mapping relationship of low- and high-resolution projection. The network label is high-resolution projection and the input is its corresponding interpolation data after down sampling. FDK algorithm is utilized for three-dimensional image reconstruction and one slice of reconstruction image is taken as an example to evaluate the performance of the proposed method. Qualitative and quantitative results show that the proposed method is potential to improve the resolution of projection and enables the reconstructed image with higher quality. △ Less

Submitted 23 March, 2019; originally announced March 2019.

A Sinogram Inpainting Method based on Generative Adversarial Network for Limited-angle Computed Tomography

Authors: Ziheng Li, Wenkun Zhang, Linyuan Wang, Ailong Cai, Ningning Liang, Bin Yan, Lei Li

Abstract: Limited-angle computed tomography (CT) image reconstruction is a challenging reconstruction problem in the fields of CT. With the development of deep learning, the generative adversarial network (GAN) perform well in image restoration by approximating the distribution of training sample data. In this paper, we proposed an effective GAN-based inpainting method to restore the missing sinogram data f… ▽ More Limited-angle computed tomography (CT) image reconstruction is a challenging reconstruction problem in the fields of CT. With the development of deep learning, the generative adversarial network (GAN) perform well in image restoration by approximating the distribution of training sample data. In this paper, we proposed an effective GAN-based inpainting method to restore the missing sinogram data for limited-angle scanning. To estimate the missing data, we design the generator and discriminator of the patch-GAN and train the network to learn the data distribution of the sinogram. We obtain the reconstructed image from the restored sinogram by filtered back projection and simultaneous algebraic reconstruction technique with total variation. Experimental results show that serious artifacts caused by missing projection data can be reduced by the proposed method, and it is hopeful to solve the reconstruction problem of 60 degrees limited scanning angle. △ Less

Submitted 10 March, 2019; originally announced March 2019.