Showing 1–29 of 29 results for author: Lenz, M

The Cable to the Moon: Veritasium's Light Bulb Experiment in Low-Cost Miniature Form

Authors: Michael Lenz

Abstract: In a popular YouTube video by the channel Veritasium, the following question is posed: Imagine you have a giant circuit consisting of a battery, a switch, a light bulb, and two wires which are each 300,000 km long. That is the distance that light travels in one second. So, they [the wires] would reach out halfway to the Moon and then come back to be connected to the light bulb, which is one meter… ▽ More In a popular YouTube video by the channel Veritasium, the following question is posed: Imagine you have a giant circuit consisting of a battery, a switch, a light bulb, and two wires which are each 300,000 km long. That is the distance that light travels in one second. So, they [the wires] would reach out halfway to the Moon and then come back to be connected to the light bulb, which is one meter away. Now the question is: After I close this switch, how long would it take for the light bulb to light up: Is it half a second, one second, two seconds, 1m/c or none of the above? As part of the Physics Specialist Camp 2022 in Seifhennersdorf -- a final event of the Saxon Physics Olympiad -- students from grades 9 and 10 built a miniature model consisting of a printed circuit board and two 10-meter cables to experimentally study the question. This article describes the experimental setup, presents some exemplary results, and explains them in detail. To enable reconstruction for educational purposes, the final PCB layout, as well as the supply sources and design considerations, are provided. △ Less

Submitted 7 January, 2025; originally announced January 2025.

Transient contacts between filaments impart its elasticity to branched actin

Authors: Mehdi Bouzid, Cesar Valencia Gallardo, Magdalena Kopec, Lara Koehler, Giuseppe Foffi, Olivia du Roure, Julien Heuvingh, Martin Lenz

Abstract: Branched actin networks exert pushing forces in eukaryotic cells, and adapt their stiffness to their environment. The physical basis for their mechanics and adaptability is however not understood. Indeed, here we show that their high density and low connectivity place them outside the scope of standard elastic network models for actin. We combine high-precision mechanical experiments, molecular dy… ▽ More Branched actin networks exert pushing forces in eukaryotic cells, and adapt their stiffness to their environment. The physical basis for their mechanics and adaptability is however not understood. Indeed, here we show that their high density and low connectivity place them outside the scope of standard elastic network models for actin. We combine high-precision mechanical experiments, molecular dynamics simulations and a mean-field elastic theory to show that they are instead dominated by the proliferation of interfilament contacts under compression. This places branched actin in the same category as undercoordinated, fibrous materials such as sheep's wool. When the network is grown under force, filaments entangle as if knitted together and trap contacts in their structure. Trapped contacts play a similar role as crosslinkers in rigidifying the network, and are thus key to its active adaptive mechanics. △ Less

Submitted 9 September, 2024; v1 submitted 31 August, 2024; originally announced September 2024.

Comments: 7 pages, 5 figures

How do particles with complex interactions self-assemble?

Authors: Lara Koehler, Pierre Ronceray, Martin Lenz

Abstract: In living cells, proteins self-assemble into large functional structures based on specific interactions between molecularly complex patches. Due to this complexity, protein self-assembly results from a competition between a large number of distinct interaction energies, of the order of one per pair of patches. Current self-assembly models however typically ignore this aspect, and the principles by… ▽ More In living cells, proteins self-assemble into large functional structures based on specific interactions between molecularly complex patches. Due to this complexity, protein self-assembly results from a competition between a large number of distinct interaction energies, of the order of one per pair of patches. Current self-assembly models however typically ignore this aspect, and the principles by which it determines the large-scale structure of protein assemblies are largely unknown. Here, we use Monte-Carlo simulations and machine learning to start to unravel these principles. We observe that despite widespread geometrical frustration, aggregates of particles with complex interactions fall within only a few categories that often display high degrees of spatial order, including crystals, fibers, and oligomers. We then successfully identify the most relevant aspect of the interaction complexity in predicting these outcomes, namely the particles' ability to form periodic structures. Our results provide a first extensive characterization of the rich design space associated with identical particles with complex interactions, and could inspire engineered self-assembling nanoobjects as well as help understand the emergence of robust functional protein structures. △ Less

Submitted 29 July, 2024; v1 submitted 11 December, 2023; originally announced December 2023.

Comments: 12 pages, 10 figures. Supplementary Information: 23 pages, 19 figures

Journal ref: Phys. Rev. X 14, 041061 (2024)

Collective deformation modes promote fibrous self-assembly in protein-like particles

Authors: Hugo Le Roy, M. Mert Terzi, Martin lenz

Abstract: The self-assembly of particles into organized structures is a key feature of living organisms and a major engineering challenge. While it may proceed through the binding of perfectly matched, puzzle-pieces-like particles, many other instances involve ill-fitting particles that must deform to fit together. These include some pathological proteins, which have a known propensity to form fibrous aggre… ▽ More The self-assembly of particles into organized structures is a key feature of living organisms and a major engineering challenge. While it may proceed through the binding of perfectly matched, puzzle-pieces-like particles, many other instances involve ill-fitting particles that must deform to fit together. These include some pathological proteins, which have a known propensity to form fibrous aggregates. Despite this observation, the general relationship between the individual characteristics of the particles and the overall structure of the aggregate is not understood. To elucidate it, we analytically and numerically study the self-assembly of two-dimensional, deformable ill-fitting particles. We find that moderately sticky particles tend to form equilibrium self-limited aggregates whose size is set by an elastic boundary layer associated with collective deformations that may extend over many particles. Particles with a soft internal deformation mode thus give rise to large aggregates. Besides, when the particles are incompressible, their aggregates tend to be anisotropic and fiber-like. Our results are preserved in a more complex particle model with randomly chosen elastic properties. This indicates that generic protein characteristics such as allostery and incompressibility could favor the formation of fibers in protein aggregation, and suggests design principles for artificial self-assembling structures. △ Less

Submitted 5 April, 2024; v1 submitted 9 August, 2023; originally announced August 2023.

Comments: 21 pages, 12 figures

Transverse fluctuations control the assembly of semiflexible filaments

Authors: Valerio Sorichetti, Martin Lenz

Abstract: The kinetics of the assembly of semiflexible filaments through end-to-end annealing is key to the structure of the cytoskeleton, but is not understood. We analyze this problem through scaling theory and simulations, and uncover a regime where filaments ends find each other through bending fluctuations without the need for the whole filament to diffuse. This results in a very substantial speed-up o… ▽ More The kinetics of the assembly of semiflexible filaments through end-to-end annealing is key to the structure of the cytoskeleton, but is not understood. We analyze this problem through scaling theory and simulations, and uncover a regime where filaments ends find each other through bending fluctuations without the need for the whole filament to diffuse. This results in a very substantial speed-up of assembly in physiological regimes, and could help understand the dynamics of actin and intermediate filaments in biological processes such as wound healing and cell division. △ Less

Submitted 31 October, 2023; v1 submitted 6 March, 2023; originally announced March 2023.

Comments: Main: 5 pages, 4 figures. Supplementary: 10 pages, 9 figures. To be published in Physical Review Letters

Journal ref: Phys. Rev. Lett. 131, 228401 (2023)

Electro-optic sampling based characterization of broad-band high efficiency THz-FEL

Authors: Maximilian Lenz, Andrew Fisher, Youna Park, Alexander Ody, Pietro Musumeci

Abstract: Extremely high beam-to-radiation energy conversion efficiencies can be obtained in a THz FEL using a strongly tapered helical undulator at the zero-slippage resonant condition, where a circular waveguide is used to match the radiation group velocity to the electron beam longitudinal velocity. In this paper we report on the first electro-optic sampling (EOS) based measurements of the broadband THz… ▽ More Extremely high beam-to-radiation energy conversion efficiencies can be obtained in a THz FEL using a strongly tapered helical undulator at the zero-slippage resonant condition, where a circular waveguide is used to match the radiation group velocity to the electron beam longitudinal velocity. In this paper we report on the first electro-optic sampling (EOS) based measurements of the broadband THz FEL radiation pulses emitted in this regime. The THz field waveforms are reconstructed in the spatial and temporal domains using multi-shot and single-shot EOS schemes respectively. The measurements are performed varying the input electron beam energy in the undulator providing insights on the complex dynamics in a waveguide FEL. △ Less

Submitted 27 June, 2022; originally announced June 2022.

Twist-induced local curvature of filaments in DNA toroids

Authors: Luca Barberi, Martin Lenz

Abstract: DNA toroidal bundles form upon condensation of one or multiple DNA filaments. DNA filaments in toroidal bundles are hexagonally packed, and collectively twist around the center line of the toroid. In a previous study, we and our coworkers argue that the filaments' curvature locally correlates with their density in the bundle, with the filaments less closely packed where their curvature appears to… ▽ More DNA toroidal bundles form upon condensation of one or multiple DNA filaments. DNA filaments in toroidal bundles are hexagonally packed, and collectively twist around the center line of the toroid. In a previous study, we and our coworkers argue that the filaments' curvature locally correlates with their density in the bundle, with the filaments less closely packed where their curvature appears to be higher. We base our claim on the assumption that twist has a negligible effect on the local curvature of filaments in DNA toroids. However, this remains to be proven. We fill this gap here, by calculating the distribution of filaments' curvature in a geometric model of twisted toroidal bundle, which we use to describe DNA toroids by an appropriate choice of parameters. This allows us to substantiate our previous study and suggest directions for future experiments. △ Less

Submitted 18 January, 2021; originally announced January 2021.

Design and Beam Test Results for the 2D Projective sPHENIX Electromagnetic Calorimeter Prototype

Authors: C. A. Aidala, S. Altaf, R. Belmont, S. Boose, D. Cacace, M. Connors, E. Desmond, J. Frantz, E. A. Gamez, N. Grau, J. S. Haggerty, A. Hodges, J. Huang, Y. Kim, M. D. Lenz, W. Lenz, N. A. Lewis, E. J. Mannel, J. D. Osborn, D. V. Perepelitsa, M. Phipps, R. Pisani, S. Polizzo, A. Pun, M. L. Purschke , et al. (13 additional authors not shown)

Abstract: sPHENIX is a new experiment under construction for the Relativistic Heavy Ion Collider at Brookhaven National Laboratory which will study the quark-gluon plasma to further the understanding of QCD matter and interactions. A prototype of the sPHENIX electromagnetic calorimeter (EMCal) was tested at the Fermilab Test Beam Facility in Spring 2018 as experiment T-1044. The EMCal prototype corresponds… ▽ More sPHENIX is a new experiment under construction for the Relativistic Heavy Ion Collider at Brookhaven National Laboratory which will study the quark-gluon plasma to further the understanding of QCD matter and interactions. A prototype of the sPHENIX electromagnetic calorimeter (EMCal) was tested at the Fermilab Test Beam Facility in Spring 2018 as experiment T-1044. The EMCal prototype corresponds to a solid angle of $ Δη\times Δφ= 0.2 \times 0.2$ centered at pseudo-rapidity $η= 1$. The prototype consists of scintillating fibers embedded in a mix of tungsten powder and epoxy. The fibers project back approximately to the center of the sPHENIX detector, giving 2D projectivity. The energy response of the EMCal prototype was studied as a function of position and input energy. The energy resolution of the EMCal prototype was obtained after applying a position dependent energy correction and a beam profile correction. Two separate position dependent corrections were considered. The EMCal energy resolution was found to be $σ(E)/\langle E\rangle = 3.5(0.1) \oplus 13.3(0.2)/\sqrt{E}$ based on the hodoscope position dependent correction, and $σ(E)/\langle E\rangle = 3.0(0.1) \oplus 15.4(0.3)/\sqrt{E}$ based on the cluster position dependent correction. These energy resolution results meet the requirements of the sPHENIX physics program. △ Less

Submitted 15 March, 2021; v1 submitted 27 March, 2020; originally announced March 2020.

Comments: 9 pages, 9 figures, 3 tables. Published in IEEE Transactions on Nuclear Science (vol. 68, no. 2, pp. 173-181, Feb. 2021). Revisions over previous version in response to referee and editor comments

Journal ref: IEEE Transactions on Nuclear Science, vol. 68, no. 2, pp. 173-181, Feb. 2021

Geometry of martensite needles in shape memory alloys

Authors: Sergio Conti, Martin Lenz, Nora Lüthen, Martin Rumpf, Barbara Zwicknagl

Abstract: We study the geometry of needle-shaped domains in shape-memory alloys. Needle-shaped domains are ubiquitously found in martensites around macroscopic interfaces between regions which are laminated in different directions, or close to macroscopic austenite/twinned-martensite interfaces. Their geometry results from the interplay of the local nonconvexity of the effective energy density with long-ran… ▽ More We study the geometry of needle-shaped domains in shape-memory alloys. Needle-shaped domains are ubiquitously found in martensites around macroscopic interfaces between regions which are laminated in different directions, or close to macroscopic austenite/twinned-martensite interfaces. Their geometry results from the interplay of the local nonconvexity of the effective energy density with long-range (linear) interactions mediated by the elastic strain field, and is up to now poorly understood. We present a two-dimensional shape optimization model based on finite elasticity and discuss its numerical solution. Our results indicate that the tapering profile of the needles can be understood within finite elasticity, but not with linearized elasticity. The resulting tapering and bending reproduce the main features of experimental observations on NiAl. △ Less

Submitted 3 December, 2019; originally announced December 2019.

Comments: 9 pages, 6 figures

MSC Class: 74N15 (Primary) 74P10; 74S05 (Secondary)

Swimmer suspensions on substrates: anomalous stability and long-range order

Authors: Ananyo Maitra, Pragya Srivastava, M. Cristina Marchetti, Sriram Ramaswamy, Martin Lenz

Abstract: We present a comprehensive theory of the dynamics and fluctuations of a two-dimensional suspension of polar active particles in an incompressible fluid confined to a substrate. We show that, depending on the sign of a single parameter, a state with polar orientational order is anomalously stable (or anomalously unstable), with a nonzero relaxation (or growth) rate for angular fluctuations at zero… ▽ More We present a comprehensive theory of the dynamics and fluctuations of a two-dimensional suspension of polar active particles in an incompressible fluid confined to a substrate. We show that, depending on the sign of a single parameter, a state with polar orientational order is anomalously stable (or anomalously unstable), with a nonzero relaxation (or growth) rate for angular fluctuations at zero wavenumber. This screening of the broken-symmetry mode in the stable state does lead to conventional rather than giant number fluctuations as argued by Bricard et al., Nature ${\bf 503}$, 95 (2013), but their bend instability in a splay-stable flock does not exist and the polar phase has long-range order in two dimensions. Our theory also describes confined three-dimensional thin-film suspensions of active polar particles as well as dense compressible active polar rods, and predicts a flocking transition without a banding instability △ Less

Submitted 4 January, 2019; originally announced January 2019.

Journal ref: Phys. Rev. Lett. 124, 028002 (2020)

Fiber plucking by molecular motors yields large emergent contractility in stiff biopolymer networks

Authors: Pierre Ronceray, Chase P. Broedersz, Martin Lenz

Abstract: The mechanical properties of the cell depend crucially on the tension of its cytoskeleton, a biopolymer network that is put under stress by active motor proteins. While the fibrous nature of the network is known to strongly affect the transmission of these forces to the cellular scale, our understanding of this process remains incomplete. Here we investigate the transmission of forces through the… ▽ More The mechanical properties of the cell depend crucially on the tension of its cytoskeleton, a biopolymer network that is put under stress by active motor proteins. While the fibrous nature of the network is known to strongly affect the transmission of these forces to the cellular scale, our understanding of this process remains incomplete. Here we investigate the transmission of forces through the network at the individual filament level, and show that active forces can be geometrically amplified as a transverse motor-generated force force "plucks" the fiber and induces a nonlinear tension. In stiff and densely connnected networks, this tension results in large network-wide tensile stresses that far exceed the expectation drawn from a linear elastic theory. This amplification mechanism competes with a recently characterized network-level amplification due to fiber buckling, suggesting that that fiber networks provide several distinct pathways for living systems to amplify their molecular forces. △ Less

Submitted 11 May, 2018; originally announced May 2018.

Comments: 6 pages, 4 figures

Stress-dependent amplification of active forces in nonlinear elastic media

Authors: Pierre Ronceray, Chase Broedersz, Martin Lenz

Abstract: The production of mechanical stresses in living organisms largely relies on localized, force-generating active units embedded in filamentous matrices. Numerical simulations of discrete fiber networks with fixed boundaries have shown that buckling in the matrix dramatically amplifies the resulting active stresses. Here we extend this result to a bucklable continuum elastic medium subjected to an ar… ▽ More The production of mechanical stresses in living organisms largely relies on localized, force-generating active units embedded in filamentous matrices. Numerical simulations of discrete fiber networks with fixed boundaries have shown that buckling in the matrix dramatically amplifies the resulting active stresses. Here we extend this result to a bucklable continuum elastic medium subjected to an arbitrary external stress, and derive analytical expressions for the active, nonlinear constitutive relations characterizing the full active medium. Inserting these relations into popular "active gel" descriptions of living tissues and the cytoskeleton will enable investigations into nonlinear regimes previously inaccessible due to the phenomenological nature of these theories. △ Less

Submitted 7 May, 2018; originally announced May 2018.

Comments: 7 pages, 5 figures

Spontaneous rotation can stabilise ordered chiral active fluids

Authors: Ananyo Maitra, Martin Lenz

Abstract: Active hydrodynamic theories are a powerful tool to study the emergent ordered phases of internally driven particles such as bird flocks, bacterial suspension and their artificial analogues. While theories of orientationally ordered phases are by now well established, the effect of chirality on these phases is much less studied. In this paper, we present the first complete dynamical theory of orie… ▽ More Active hydrodynamic theories are a powerful tool to study the emergent ordered phases of internally driven particles such as bird flocks, bacterial suspension and their artificial analogues. While theories of orientationally ordered phases are by now well established, the effect of chirality on these phases is much less studied. In this paper, we present the first complete dynamical theory of orientationally ordered chiral particles in two-dimensional incompressible systems. We show that phase-coherent states of rotating chiral particles are remarkably stable in both momentum-conserved and non-conserved systems in contrast to their non-rotating counterparts. Furthermore, defect separation -- which drives chaotic flows in non-rotating active fluids -- is suppressed by intrinsic rotation of chiral active particles. We thus establish chirality as a source of dramatic stabilization in active systems, which could be key in interpreting the collective behaviours of some biological tissues, cytoskeletal systems and collections of bacteria. △ Less

Submitted 4 January, 2019; v1 submitted 26 April, 2018; originally announced April 2018.

Stability from activity

Authors: Ananyo Maitra, Pragya Srivastava, M. Cristina Marchetti, Juho Lintuvuori, Sriram Ramaswamy, Martin Lenz

Abstract: Suspensions of actively driven anisotropic objects exhibit distinctively nonequilibrium behaviors, and current theories predict that they are incapable of sustaining orientational order at high activity. By contrast, here we show that nematic suspensions on a substrate can display order at arbitrarily high activity due to a previously unreported, potentially stabilizing active force. The resulting… ▽ More Suspensions of actively driven anisotropic objects exhibit distinctively nonequilibrium behaviors, and current theories predict that they are incapable of sustaining orientational order at high activity. By contrast, here we show that nematic suspensions on a substrate can display order at arbitrarily high activity due to a previously unreported, potentially stabilizing active force. The resulting nonequilibrium ordered phase displays robust giant number fluctuations that cannot be suppressed even by an incompressible solvent. Our results apply to virtually all experimental assays used to investigate the active nematic ordering of self-propelled colloids, bacterial suspensions and the cytoskeleton, and have testable implications in interpreting their nonequilibrium behaviors △ Less

Submitted 7 November, 2017; originally announced November 2017.

Extensile actomyosin?

Authors: Martin Lenz

Abstract: Living cells move thanks to assemblies of actin filaments and myosin motors that range from very organized striated muscle tissue to disordered intracellular bundles. The mechanisms powering these disordered structures are debated, and all models studied so far predict that they are contractile. We reexamine this prediction through a theoretical treatment of the interplay of three well-characteriz… ▽ More Living cells move thanks to assemblies of actin filaments and myosin motors that range from very organized striated muscle tissue to disordered intracellular bundles. The mechanisms powering these disordered structures are debated, and all models studied so far predict that they are contractile. We reexamine this prediction through a theoretical treatment of the interplay of three well-characterized internal dynamical processes in actomyosin bundles: actin treadmilling, the attachement-detachment dynamics of myosin and that of crosslinking proteins. We show that these processes enable an extensive control of the bundle's active mechanics, including reversals of the filaments' apparent velocities and the possibility of generating extension instead of contraction. These effects offer a new perspective on well-studied in vivo systems, as well as a robust criterion to experimentally elucidate the underpinnings of actomyosin activity. △ Less

Submitted 24 September, 2017; originally announced September 2017.

Comments: 5 pages, 5 figures

Cell contraction induces long-ranged stress stiffening in the extracellular matrix

Authors: Yu Long Han, Pierre Ronceray, Guoqiang Xu, Andrea Malandrino, Roger Kamm, Martin Lenz, Chase P. Broedersz, Ming Guo

Abstract: Animal cells in tissues are supported by biopolymer matrices, which typically exhibit highly nonlinear mechanical properties. While the linear elasticity of the matrix can significantly impact cell mechanics and functionality, it remains largely unknown how cells, in turn, affect the nonlinear mechanics of their surrounding matrix. Here we show that living contractile cells are able to generate a… ▽ More Animal cells in tissues are supported by biopolymer matrices, which typically exhibit highly nonlinear mechanical properties. While the linear elasticity of the matrix can significantly impact cell mechanics and functionality, it remains largely unknown how cells, in turn, affect the nonlinear mechanics of their surrounding matrix. Here we show that living contractile cells are able to generate a massive stiffness gradient in three distinct 3D extracellular matrix model systems: collagen, fibrin, and Matrigel. We decipher this remarkable behavior by introducing Nonlinear Stress Inference Microscopy (NSIM), a novel technique to infer stress fields in a 3D matrix from nonlinear microrheology measurement with optical tweezers. Using NSIM and simulations, we reveal a long-ranged propagation of cell-generated stresses resulting from local filament buckling. This slow decay of stress gives rise to the large spatial extent of the observed cell-induced matrix stiffness gradient, which could form a mechanism for mechanical communication between cells. △ Less

Submitted 3 September, 2017; originally announced September 2017.

Geometrical frustration yields fiber formation in self-assembly

Authors: Martin Lenz, Thomas A. Witten

Abstract: Controlling the self-assembly of supramolecular structures is vital for living cells, and a central challenge for engineering at the nano- and microscales. Nevertheless, even particles without optimized shapes can robustly form well-defined morphologies. This is the case in numerous medical conditions where normally soluble proteins aggregate into fibers. Beyond the diversity of molecular mechanis… ▽ More Controlling the self-assembly of supramolecular structures is vital for living cells, and a central challenge for engineering at the nano- and microscales. Nevertheless, even particles without optimized shapes can robustly form well-defined morphologies. This is the case in numerous medical conditions where normally soluble proteins aggregate into fibers. Beyond the diversity of molecular mechanisms involved, we propose that fibers generically arise from the aggregation of irregular particles with short-range interactions. Using a minimal model of ill-fitting, sticky particles, we demonstrate robust fiber formation for a variety of particle shapes and aggregation conditions. Geometrical frustration plays a crucial role in this process, and accounts for the range of parameters in which fibers form as well as for their metastable character. △ Less

Submitted 23 May, 2017; originally announced May 2017.

Comments: 6 pages, 5 figures, 1 ancillary movie; to appear in Nature Physics

Journal ref: Nat. Phys. 13, 1100 (2017)

Design and Beam Test Results for the sPHENIX Electromagnetic and Hadronic Calorimeter Prototypes

Authors: C. A. Aidala, V. Bailey, S. Beckman, R. Belmont, C. Biggs, J. Blackburn, S. Boose, M. Chiu, M. Connors, E. Desmond, A. Franz, J. S. Haggerty, X. He, M. M. Higdon, J. Huang, K. Kauder, E. Kistenev, J. LaBounty, J. G. Lajoie, M. Lenz, W. Lenz, S. Li, V. R. Loggins, E. J. Mannel, T. Majoros , et al. (25 additional authors not shown)

Abstract: The super Pioneering High Energy Nuclear Interaction eXperiment (sPHENIX) at the Relativistic Heavy Ion Collider (RHIC) will perform high precision measurements of jets and heavy flavor observables for a wide selection of nuclear collision systems, elucidating the microscopic nature of strongly interacting matter ranging from nucleons to the strongly coupled quark-gluon plasma. A prototype of the… ▽ More The super Pioneering High Energy Nuclear Interaction eXperiment (sPHENIX) at the Relativistic Heavy Ion Collider (RHIC) will perform high precision measurements of jets and heavy flavor observables for a wide selection of nuclear collision systems, elucidating the microscopic nature of strongly interacting matter ranging from nucleons to the strongly coupled quark-gluon plasma. A prototype of the sPHENIX calorimeter system was tested at the Fermilab Test Beam Facility as experiment T-1044 in the spring of 2016. The electromagnetic calorimeter (EMCal) prototype is composed of scintillating fibers embedded in a mixture of tungsten powder and epoxy. The hadronic calorimeter (HCal) prototype is composed of tilted steel plates alternating with plastic scintillator. Results of the test beam reveal the energy resolution for electrons in the EMCal is $2.8\%\oplus~15.5\%/\sqrt{E}$ and the energy resolution for hadrons in the combined EMCal plus HCal system is $13.5\%\oplus 64.9\%/\sqrt{E}$. These results demonstrate that the performance of the proposed calorimeter system satisfies the sPHENIX specifications. △ Less

Submitted 16 December, 2018; v1 submitted 5 April, 2017; originally announced April 2017.

Comments: 19 pages, 31 figures, 3 tables. Published in IEEE Transactions on Nuclear Science (Volume: 65 , Issue: 12 , Dec. 2018 ). Revisions over previous version in response to referee and editor comments, plus updating of references and acknowledgement

Journal ref: IEEE Transactions on Nuclear Science, Volume 65, Issue 12, pp. 2901-2919, December 2018

Fiber networks amplify active stress

Authors: Pierre Ronceray, Chase Broedersz, Martin Lenz

Abstract: Large-scale force generation is essential for biological functions such as cell motility, embryonic development, and muscle contraction. In these processes, forces generated at the molecular level by motor proteins are transmitted by disordered fiber networks, resulting in large-scale active stresses. While these fiber networks are well characterized macroscopically, this stress generation by micr… ▽ More Large-scale force generation is essential for biological functions such as cell motility, embryonic development, and muscle contraction. In these processes, forces generated at the molecular level by motor proteins are transmitted by disordered fiber networks, resulting in large-scale active stresses. While these fiber networks are well characterized macroscopically, this stress generation by microscopic active units is not well understood. Here we theoretically study force transmission in these networks, and find that local active forces are rectified towards isotropic contraction and strongly amplified as fibers collectively buckle in the vicinity of the active units. This stress amplification is reinforced by the networks' disordered nature, but saturates for high densities of active units. Our predictions are quantitatively consistent with experiments on reconstituted tissues and actomyosin networks, and shed light on the role of the network microstructure in shaping active stresses in cells and tissue. △ Less

Submitted 22 July, 2015; v1 submitted 21 July, 2015; originally announced July 2015.

Comments: 8 pages, 4 figures. Supporting information: 5 pages, 5 figures

Journal ref: Proc. Natl. Acad. Sci. U.S.A. 113, 2827 (2016)

A Reaction-Diffusion Model of the Cadherin-Catenin System: A Possible Mechanism for Contact Inhibition and Implications for Tumorigenesis

Authors: Markus Basan, Timon Idema, Martin Lenz, Jean-François Joanny, Thomas Risler

Abstract: Contact inhibition is the process by which cells switch from a motile growing state to a passive and stabilized state upon touching their neighbors. When two cells touch, an adhesion link is created between them by means of transmembrane E-cadherin proteins. Simultaneously, their actin filaments stop polymerizing in the direction perpendicular to the membrane and reorganize to create an apical bel… ▽ More Contact inhibition is the process by which cells switch from a motile growing state to a passive and stabilized state upon touching their neighbors. When two cells touch, an adhesion link is created between them by means of transmembrane E-cadherin proteins. Simultaneously, their actin filaments stop polymerizing in the direction perpendicular to the membrane and reorganize to create an apical belt that colocalizes with the adhesion links. Here, we propose a detailed quantitative model of the role of the cytoplasmic $β$-catenin and $α$-catenin proteins in this process, treated as a reaction-diffusion system. Upon cell-cell contact, the concentration in $α$-catenin dimers increases, inhibiting actin branching and thereby reducing cellular motility and expansion pressure. This model provides a mechanism for contact inhibition that could explain previously unrelated experimental findings on the role played by E-cadherin, $β$-catenin and $α$-catenin in the cellular phenotype and in tumorigenesis. In particular, we address the effect of a knockout of the adenomatous polyposis coli tumor suppressor gene. Potential direct tests of our model are discussed. △ Less

Submitted 4 May, 2015; originally announced May 2015.

Journal ref: Biophys. J. 98 (12), 2770-2779 (2010)

Hysteresis in Magnetic Shape Memory Composites: Modeling and Simulation

Authors: Sergio Conti, Martin Lenz, Martin Rumpf

Abstract: Magnetic shape memory alloys are characterized by the coupling between a structural phase transition and magnetic one. This permits to control the shape change via an external magnetic field, at least in single crystals. Composite materials with single-crystalline particles embedded in a softer matrix have been proposed as a way to overcome the blocking of the transformation at grain boundaries. W… ▽ More Magnetic shape memory alloys are characterized by the coupling between a structural phase transition and magnetic one. This permits to control the shape change via an external magnetic field, at least in single crystals. Composite materials with single-crystalline particles embedded in a softer matrix have been proposed as a way to overcome the blocking of the transformation at grain boundaries. We investigate hysteresis phenomena for small NiMnGa single crystals embedded in a polymer matrix for slowly varying magnetic fields. The evolution of the microstructure is studied within the rate-independent variational framework proposed by Mielke and Theil (1999). The underlying variational model incorporates linearized elasticity, micromagnetism, stray field and a dissipation term proportional to the volume swept by the phase boundary. The time discretization is based on an incremental minimization of the sum of energy and dissipation. A backtracking approach is employed to approximately ensure the global minimality condition. We illustrate and discuss the influence of the particle geometry (volume fraction, shape, arrangement) and the polymer elastic parameters on the observed hysteresis and compare with recent experimental results. △ Less

Submitted 23 February, 2015; v1 submitted 19 February, 2015; originally announced February 2015.

Comments: 18 pages, 11 figures

MSC Class: 74N30 (Primary); 74F15; 74S15 (Secondary)

Journal ref: J. Mech. Phys. Solids 89 (2016), 272-286

Connecting local active forces to macroscopic stress in elastic media

Authors: Pierre Ronceray, Martin Lenz

Abstract: In contrast with ordinary materials, living matter drives its own motion by generating active, out-of-equilibrium internal stresses. These stresses typically originate from localized active elements embedded in an elastic medium, such as molecular motors inside the cell or contractile cells in a tissue. While many large-scale phenomenological theories of such active media have been developed, a sy… ▽ More In contrast with ordinary materials, living matter drives its own motion by generating active, out-of-equilibrium internal stresses. These stresses typically originate from localized active elements embedded in an elastic medium, such as molecular motors inside the cell or contractile cells in a tissue. While many large-scale phenomenological theories of such active media have been developed, a systematic understanding of the emergence of stress from the local force-generating elements is lacking. In this paper, we present a rigorous theoretical framework to study this relationship. We show that the medium's macroscopic active stress tensor is equal to the active elements' force dipole tensor per unit volume in both continuum and discrete linear homogeneous media of arbitrary geometries. This relationship is conserved on average in the presence of disorder, but can be violated in nonlinear elastic media. Such effects can lead to either a reinforcement or an attenuation of the active stresses, giving us a glimpse of the ways in which nature might harness microscopic forces to create active materials. △ Less

Submitted 12 November, 2014; originally announced November 2014.

Comments: 9 pages, 4 figures

Geometrical origins of contractility in disordered actomyosin networks

Authors: Martin Lenz

Abstract: Movement within eukaryotic cells largely originates from localized forces exerted by myosin motors on scaffolds of actin filaments. Although individual motors locally exert both contractile and extensile forces, large actomyosin structures at the cellular scale are overwhelmingly contractile, suggesting that the scaffold serves to favor contraction over extension. While this mechanism is well unde… ▽ More Movement within eukaryotic cells largely originates from localized forces exerted by myosin motors on scaffolds of actin filaments. Although individual motors locally exert both contractile and extensile forces, large actomyosin structures at the cellular scale are overwhelmingly contractile, suggesting that the scaffold serves to favor contraction over extension. While this mechanism is well understood in highly organized striated muscle, its origin in disordered networks such as the cell cortex is unknown. Here we develop a mathematical model of the actin scaffold's local two- or three-dimensional mechanics and identify four competing contraction mechanisms. We predict that one mechanism dominates, whereby local deformations of the actin break the balance between contraction and extension. In this mechanism, contractile forces result mostly from motors plucking the filaments transversely rather than buckling them longitudinally. These findings sheds light on recent $\textit{in vitro}$ experiments, and provides a new geometrical understanding of contractility in the myriad of disordered actomyosin systems found $\textit{in vivo}$. △ Less

Submitted 24 July, 2014; originally announced July 2014.

Comments: 9 pages, 5 figures, 5-page supplement

Journal ref: Phys. Rev. X 4, 041002 (2014)

The PHENIX Forward Silicon Vertex Detector

Authors: C. Aidala, L. Anaya, E. Anderssen, A. Bambaugh, A. Barron, J. G. Boissevain, J. Bok, S. Boose, M. L. Brooks, S. Butsyk, M. Cepeda, P. Chacon, S. Chacon, L. Chavez, T. Cote, C. D'Agostino, A. Datta, K. DeBlasio, L. DelMonte, E. J. Desmond, J. M. Durham, D. Fields, M. Finger, C. Gingu, B. Gonzales , et al. (60 additional authors not shown)

Abstract: A new silicon detector has been developed to provide the PHENIX experiment with precise charged particle tracking at forward and backward rapidity. The Forward Silicon Vertex Tracker (FVTX) was installed in PHENIX prior to the 2012 run period of the Relativistic Heavy Ion Collider (RHIC). The FVTX is composed of two annular endcaps, each with four stations of silicon mini-strip sensors, covering a… ▽ More A new silicon detector has been developed to provide the PHENIX experiment with precise charged particle tracking at forward and backward rapidity. The Forward Silicon Vertex Tracker (FVTX) was installed in PHENIX prior to the 2012 run period of the Relativistic Heavy Ion Collider (RHIC). The FVTX is composed of two annular endcaps, each with four stations of silicon mini-strip sensors, covering a rapidity range of $1.2<|η|<2.2$ that closely matches the two existing PHENIX muon arms. Each station consists of 48 individual silicon sensors, each of which contains two columns of mini-strips with 75 $μ$m pitch in the radial direction and lengths in the $φ$ direction varying from 3.4 mm at the inner radius to 11.5 mm at the outer radius. The FVTX has approximately 0.54 million strips in each endcap. These are read out with FPHX chips, developed in collaboration with Fermilab, which are wire bonded directly to the mini-strips. The maximum strip occupancy reached in central Au-Au collisions is approximately 2.8%. The precision tracking provided by this device makes the identification of muons from secondary vertices away from the primary event vertex possible. The expected distance of closest approach (DCA) resolution of 200 $μ$m or better for particles with a transverse momentum of 5 GeV/$c$ will allow identification of muons from relatively long-lived particles, such as $D$ and $B$ mesons, through their broader DCA distributions. △ Less

Submitted 14 February, 2014; v1 submitted 14 November, 2013; originally announced November 2013.

Comments: version submitted to NIM

Contractile units in disordered actomyosin bundles arise from F-actin buckling

Authors: Martin Lenz, Todd Thoresen, Margaret L. Gardel, Aaron R. Dinner

Abstract: Bundles of filaments and motors are central to contractility in cells. The classic example is striated muscle, where actomyosin contractility is mediated by highly organized sarcomeres which act as fundamental contractile units. However, many contractile bundles in vivo and in vitro lack sarcomeric organization. Here we propose a model for how contractility can arise in actomyosin bundles without… ▽ More Bundles of filaments and motors are central to contractility in cells. The classic example is striated muscle, where actomyosin contractility is mediated by highly organized sarcomeres which act as fundamental contractile units. However, many contractile bundles in vivo and in vitro lack sarcomeric organization. Here we propose a model for how contractility can arise in actomyosin bundles without sarcomeric organization and validate its predictions with experiments on a reconstituted system. In the model, internal stresses in frustrated arrangements of motors with diverse velocities cause filaments to buckle, leading to overall shortening. We describe the onset of buckling in the presence of stochastic actin-myosin detachment and predict that buckling-induced contraction occurs in an intermediate range of motor densities. We then calculate the size of the "contractile units" associated with this process. Consistent with these results, our reconstituted actomyosin bundles contract at relatively high motor density, and we observe buckling at the predicted length scale. △ Less

Submitted 19 January, 2012; originally announced January 2012.

Comments: 5 pages, 4 figures, Supporting text and movies attached

Journal ref: Phys. Rev. Lett. 108, 238107 (2012)

Coils and transformers - often used but seldomly explained correctly

Authors: Michael Lenz, Torsten Schmidt

Abstract: The devices coil and transformer are subjects of interest in numerous schoolbooks, in introductory scientific textbooks of physics and engineering, and in laboratory courses at universities. Many descriptions, however, draw a somewhat distorted picture of the underlying physical mechanisms and provide half-knowledge or even clear misconceptions that should not be left uncommented and are therefore… ▽ More The devices coil and transformer are subjects of interest in numerous schoolbooks, in introductory scientific textbooks of physics and engineering, and in laboratory courses at universities. Many descriptions, however, draw a somewhat distorted picture of the underlying physical mechanisms and provide half-knowledge or even clear misconceptions that should not be left uncommented and are therefore studied in detail: (1) Primary and secondary voltage at a transformer have a different sign. (2) Electromagnetic induction is the only mechanism of importance for coils and transformers. (3) The terminal voltage at coils and transformers is compensated by the so-called "induced voltage" (emf), which explains why Kirchhoff's voltage law also applies to coils and transformers. (4) The cores of coils and transformers are used for their ability to store energy. Energy is transported from the primary to the secondary coil within the magnetic core. (5) The stray magnetic and electric fields are sencondary effects not having a major effect on energy transport. (6) The higher the load current, the easier a transformer goes into saturation. (7) The higher the number of turns at the primary coil, the larger the magnetic flux in the core. (8) Transformers with cores having an air gap have a lower coupling factor, because the stray inductivity increases. In the paper, the most important characteristics of coil and transformers are derived directly from Maxwell's equation for idealised conditions, and subsequently, the different misconceptions are discussed and corrected. △ Less

Submitted 6 May, 2012; v1 submitted 13 July, 2011; originally announced July 2011.

Comments: Preprint in German language

Requirements for contractility in disordered cytoskeletal bundles

Authors: Martin Lenz, Margaret L. Gardel, Aaron R. Dinner

Abstract: Actomyosin contractility is essential for biological force generation, and is well understood in highly organized structures such as striated muscle. Additionally, actomyosin bundles devoid of this organization are known to contract both in vivo and in vitro, which cannot be described by standard muscle models. To narrow down the search for possible contraction mechanisms in these systems, we inve… ▽ More Actomyosin contractility is essential for biological force generation, and is well understood in highly organized structures such as striated muscle. Additionally, actomyosin bundles devoid of this organization are known to contract both in vivo and in vitro, which cannot be described by standard muscle models. To narrow down the search for possible contraction mechanisms in these systems, we investigate their microscopic symmetries. We show that contractile behavior requires non-identical motors that generate large enough forces to probe the nonlinear elastic behavior of F-actin. This suggests a role for filament buckling in the contraction of these bundles, consistent with recent experimental results on reconstituted actomyosin bundles. △ Less

Submitted 27 January, 2012; v1 submitted 5 January, 2011; originally announced January 2011.

Comments: 10 pages, 6 figures; text shortened

Journal ref: New J. Phys. 14, 033037 (2012)

Membrane buckling induced by curved filaments

Authors: Martin Lenz, Daniel J. G. Crow, Jean-François Joanny

Abstract: We present a novel buckling instability relevant to membrane budding in eukaryotic cells. In this mechanism, curved filaments bind to a lipid bilayer without changing its intrinsic curvature. As more and more filaments adsorb, newly added ones are more and more strained, which destabilizes the flat membrane. We perform a linear stability analysis of filament-dressed membranes and find that the b… ▽ More We present a novel buckling instability relevant to membrane budding in eukaryotic cells. In this mechanism, curved filaments bind to a lipid bilayer without changing its intrinsic curvature. As more and more filaments adsorb, newly added ones are more and more strained, which destabilizes the flat membrane. We perform a linear stability analysis of filament-dressed membranes and find that the buckling threshold is within reasonable in vivo parameter values. We account for the formation of long tubes previously observed in cells and in purified systems. We study strongly deformed dressed membranes and their bifurcation diagram numerically. Our mechanism could be validated by a simple experiment. △ Less

Submitted 16 July, 2009; v1 submitted 19 March, 2009; originally announced March 2009.

Comments: 4 pages, 3 figures; title and abstract modified, typos corrected, references added

Journal ref: Phys. Rev. Lett. 103, 038101 (2009)

Mechanochemical action of the dynamin protein

Authors: Martin Lenz, Jacques Prost, Jean-François Joanny

Abstract: Dynamin is a ubiquitous GTPase that tubulates lipid bilayers and is implicated in many membrane severing processes in eukaryotic cells. Setting the grounds for a better understanding of this biological function, we develop a generalized hydrodynamics description of the conformational change of large dynamin-membrane tubes taking into account GTP consumption as a free energy source. On observable… ▽ More Dynamin is a ubiquitous GTPase that tubulates lipid bilayers and is implicated in many membrane severing processes in eukaryotic cells. Setting the grounds for a better understanding of this biological function, we develop a generalized hydrodynamics description of the conformational change of large dynamin-membrane tubes taking into account GTP consumption as a free energy source. On observable time scales, dissipation is dominated by an effective dynamin/membrane friction and the deformation field of the tube has a simple diffusive behavior, which could be tested experimentally. A more involved, semi-microscopic model yields complete predictions for the dynamics of the tube and possibly accounts for contradictory experimental results concerning its change of conformation as well as for plectonemic supercoiling. △ Less

Submitted 18 June, 2008; v1 submitted 5 April, 2008; originally announced April 2008.

Comments: 17 pages, 4 figures; typos corrected, reference added

Journal ref: Phys. Rev. E 78, 011911 (2008) and Virtual Journal of Biological Physics Research 16, 3 (2008)