-
A modular and flexible data acquisition system for a cosmic rays detector network
Authors:
Guilherme Tomio Saito,
Marco Aurelio Lisboa Leite,
Ricardo Menegasso,
Marcel Keiji Kuriyama,
Marcelo Gameiro Munhoz,
Rodrigo Estevam de Paula
Abstract:
In this paper, we describe a modular data acquisition system developed as the foundation of a cosmic ray detector network. Each detector setup (henceforth referred as a station) is composed of an independent hardware device that can be controlled and read-out through the Internet. This device is designed to acquire and process the signal of up to eight different detector planes. Each of these dete…
▽ More
In this paper, we describe a modular data acquisition system developed as the foundation of a cosmic ray detector network. Each detector setup (henceforth referred as a station) is composed of an independent hardware device that can be controlled and read-out through the Internet. This device is designed to acquire and process the signal of up to eight different detector planes. Each of these detector planes uses plastic scintillator slabs that are optically coupled to silicon photomultipliers (SiPM). Within a single station, different geometries and plane orientations are possible using the same baseline design. The main readout is based on a programmable system-on-a-chip (PSoC), a flexible and re-configurable commodity hardware that is used to implement the trigger and timing logic. A Time to Digital Converter (TDC) is used to determine the precise timing of the event relative to a GPS timing signal and to estimate the signal amplitude through the Time-over-Threshold (ToT) method. An auxiliary set of sensors provide environmental information and station detector planes orientation that, together with other operation data, are periodically sent to a server using the MQTT protocol. Data is cached using an in-memory database for online monitoring and further persisted into a SQL database for offline analysis. The server framework is based in software application containers allowing easy replication of the server infrastructure.
△ Less
Submitted 10 March, 2022;
originally announced March 2022.
-
The Phase-I Trigger Readout Electronics Upgrade of the ATLAS Liquid Argon Calorimeters
Authors:
G. Aad,
A. V. Akimov,
K. Al Khoury,
M. Aleksa,
T. Andeen,
C. Anelli,
N. Aranzabal,
C. Armijo,
A. Bagulia,
J. Ban,
T. Barillari,
F. Bellachia,
M. Benoit,
F. Bernon,
A. Berthold,
H. Bervas,
D. Besin,
A. Betti,
Y. Bianga,
M. Biaut,
D. Boline,
J. Boudreau,
T. Bouedo,
N. Braam,
M. Cano Bret
, et al. (173 additional authors not shown)
Abstract:
The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Cons…
▽ More
The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Consequently, the background rejection at trigger level is improved through enhanced filtering algorithms utilizing the additional information for topological discrimination of electromagnetic and hadronic shower shapes. This paper presents the final designs of the new electronic elements, their custom electronic devices, the procedures used to validate their proper functioning, and the performance achieved during the commissioning of this system.
△ Less
Submitted 16 May, 2022; v1 submitted 15 February, 2022;
originally announced February 2022.
-
Positron production using a 9 MeV electron linac for the GBAR experiment
Authors:
M. Charlton,
J. J. Choi,
M. Chung,
P. Clade,
P. Comini,
P-P. Crepin,
P. Crivelli,
O. Dalkarov,
P. Debu,
L. Dodd,
A. Douillet,
S. Guellati-Khelifa,
P-A. Hervieux,
L. Hilico,
A. Husson,
P. Indelicato,
G. Janka,
S. Jonsell,
J-P. Karr,
B. H. Kim,
E-S. Kim,
S. K. Kim,
Y. Ko,
T. Kosinski,
N. Kuroda
, et al. (45 additional authors not shown)
Abstract:
For the GBAR (Gravitational Behaviour of Antihydrogen at Rest) experiment at CERN's Antiproton Decelerator (AD) facility we have constructed a source of slow positrons, which uses a low-energy electron linear accelerator (linac). The driver linac produces electrons of 9 MeV kinetic energy that create positrons from bremsstrahlung-induced pair production. Staying below 10 MeV ensures no persistent…
▽ More
For the GBAR (Gravitational Behaviour of Antihydrogen at Rest) experiment at CERN's Antiproton Decelerator (AD) facility we have constructed a source of slow positrons, which uses a low-energy electron linear accelerator (linac). The driver linac produces electrons of 9 MeV kinetic energy that create positrons from bremsstrahlung-induced pair production. Staying below 10 MeV ensures no persistent radioactive activation in the target zone and that the radiation level outside the biological shield is safe for public access. An annealed tungsten-mesh assembly placed directly behind the target acts as a positron moderator. The system produces $5\times10^7$ slow positrons per second, a performance demonstrating that a low-energy electron linac is a superior choice over positron-emitting radioactive sources for high positron flux.
△ Less
Submitted 6 October, 2020; v1 submitted 10 June, 2020;
originally announced June 2020.
-
Fundamental physics constraints from testing the stability of the fine-structure constant with the ELTs
Authors:
A. C. O. Leite,
C. J. A. P. Martins,
P. Molaro,
C. S. Alves,
T. A. Silva
Abstract:
The increased collecting area of the ELTs will bring fainter high-z targets within the reach of high-resolution ultra-stable spectrographs, thus enabling a new generation of precision consistency tests, including tests of the stability of nature's fundamental couplings. For example, the stability of the fine-structure constant can be tested by looking at metal absorption lines produced by the inte…
▽ More
The increased collecting area of the ELTs will bring fainter high-z targets within the reach of high-resolution ultra-stable spectrographs, thus enabling a new generation of precision consistency tests, including tests of the stability of nature's fundamental couplings. For example, the stability of the fine-structure constant can be tested by looking at metal absorption lines produced by the intervening clouds along the line of sight of distant quasars.
In this contribution, we discuss the performance that can be expected from the ELTs in testing the stability of the fine-structure constant, based on the early ESPRESSO observations, and some comparative forecasts of the impact of these measurements for representative models of fundamental physics and cosmology.
△ Less
Submitted 7 February, 2019;
originally announced February 2019.
-
Hyperfine spectroscopy of hydrogen and antihydrogen in ASACUSA
Authors:
E. Widmann,
C. Amsler,
S. Arguedas Cuendis,
H. Breuker,
M. Diermaier,
P. Dupré,
C. Evans,
M. Fleck,
A. Gligorova,
H. Higaki,
Y. Kanai,
B. Kolbinger,
N. Kuroda,
M. Leali,
A. M. M. Leite,
V. Mäckel,
C. Malbrunot,
V. Mascagna,
O. Massiczek,
Y. Matsuda,
D. J. Murtagh,
Y. Nagata,
A. Nanda,
D. Phan,
C. Sauerzopf
, et al. (9 additional authors not shown)
Abstract:
The ASACUSA collaboration at the Antiproton Decelerator of CERN aims at a precise measurement of the antihydrogen ground-state hyperfine structure as a test of the fundamental CPT symmetry. A beam of antihydrogen atoms is formed in a CUSP trap, undergoes Rabi-type spectroscopy and is detected downstream in a dedicated antihydrogen detector. In parallel measurements using a polarized hydrogen beam…
▽ More
The ASACUSA collaboration at the Antiproton Decelerator of CERN aims at a precise measurement of the antihydrogen ground-state hyperfine structure as a test of the fundamental CPT symmetry. A beam of antihydrogen atoms is formed in a CUSP trap, undergoes Rabi-type spectroscopy and is detected downstream in a dedicated antihydrogen detector. In parallel measurements using a polarized hydrogen beam are being performed to commission the spectroscopy apparatus and to perform measurements of parameters of the Standard Model Extension (SME). The current status of antihydrogen spectroscopy is reviewed and progress of ASACUSA is presented.
△ Less
Submitted 16 December, 2018; v1 submitted 4 September, 2018;
originally announced September 2018.
-
Fundamental Cosmology from Precision Spectroscopy: I. Varying Couplings
Authors:
A. C. O. Leite,
C. J. A. P. Martins,
P. O. J. Pedrosa,
N. J. Nunes
Abstract:
The observational evidence for the acceleration of the universe demonstrates that canonical theories of cosmology and particle physics are incomplete, if not incorrect, and that new physics is out there, waiting to be discovered. Forthcoming high-resolution ultra-stable spectrographs will play a crucial role in this quest for new physics, by enabling a new generation of precision consistency tests…
▽ More
The observational evidence for the acceleration of the universe demonstrates that canonical theories of cosmology and particle physics are incomplete, if not incorrect, and that new physics is out there, waiting to be discovered. Forthcoming high-resolution ultra-stable spectrographs will play a crucial role in this quest for new physics, by enabling a new generation of precision consistency tests. Here we focus on astrophysical tests of the stability of nature's fundamental couplings, and by using Principal Component Analysis techniques further calibrated by existing VLT data we discuss how the improvements that can be expected with ESPRESSO and ELT-HIRES will impact on fundamental cosmology. In particular we show that a 20 to 30 night program on ELT-HIRES will allow it to play a leading role in fundamental cosmology.
△ Less
Submitted 13 September, 2014;
originally announced September 2014.
-
Optical modulation at around 1550 nm in a InGaAlAs optical waveguide containing a InGaAs/AlAs resonant tunnelling diode
Authors:
J. M. L. Figueiredo,
A. R. Boyd,
C. R. Stanley,
C. N. Ironside,
S. G. McMeekin,
A. M. P. Leite
Abstract:
We report electro-absorption modulation of light at around 1550 nm in a unipolar InGaAlAs optical waveguide containing a InGaAs/AlAs double-barrier resonant tunneling diode (DB-RTD). The RTD peak-to-valley transition increases the electric field across the waveguide, which shifts the core material absorption band-edge to longer wavelengths via the Franz-Keldysh effect, thus changing the light-gu…
▽ More
We report electro-absorption modulation of light at around 1550 nm in a unipolar InGaAlAs optical waveguide containing a InGaAs/AlAs double-barrier resonant tunneling diode (DB-RTD). The RTD peak-to-valley transition increases the electric field across the waveguide, which shifts the core material absorption band-edge to longer wavelengths via the Franz-Keldysh effect, thus changing the light-guiding characteristics of the waveguide. Low-frequency characterisation of a device shows modulation up to 28 dB at 1565 nm. When dc biased close to the negative differential conductance (NDC) region, the RTD optical waveguide behaves as an electro-absorption modulator integrated with a wide bandwidth electrical amplifier, offering a potential advantage over conventional pn modulators.
△ Less
Submitted 17 March, 2005; v1 submitted 17 March, 2005;
originally announced March 2005.
