-
Technical description and performance of the phase II version of the Keck Planet Imager and Characterizer
Authors:
Nemanja Jovanovic,
Daniel Echeverri,
Jacques-Robert Delorme,
Luke Finnerty,
Tobias Schofield,
Jason J. Wang,
Yinzi Xin,
Jerry Xuan,
J. Kent Wallacee,
Dimitri Mawet,
Aniket Sanghi,
Ashley Baker,
Randall Bartos,
Charlotte Z. Bond,
Benjamin Calvin,
Sylvain Cetre,
Greg Doppmann,
Michael P. Fitzgerald,
Jason Fucik,
Maodong Gao,
Jinhao Ge,
Charlotte Guthery,
Katelyn Horstman,
Chih-Chun Hsud,
Joshua Liberman
, et al. (24 additional authors not shown)
Abstract:
The Keck Planet Imager and Characterizer (KPIC) is a series of upgrades for the Keck II Adaptive Optics (AO) system and the NIRSPEC spectrograph to enable diffraction limited, high resolution (R>30000) spectroscopy of exoplanets and low mass companions in the K and L bands. Phase I consisted of single mode fiber injection/extraction units (FIU/FEU) used in conjunction with a H band pyramid wavefro…
▽ More
The Keck Planet Imager and Characterizer (KPIC) is a series of upgrades for the Keck II Adaptive Optics (AO) system and the NIRSPEC spectrograph to enable diffraction limited, high resolution (R>30000) spectroscopy of exoplanets and low mass companions in the K and L bands. Phase I consisted of single mode fiber injection/extraction units (FIU/FEU) used in conjunction with a H band pyramid wavefront sensor. The use of single mode fibers provides a gain in stellar rejection, a substantial reduction in sky background, and an extremely stable line spread function in the spectrograph. Phase II, deployed and commissioned in 2022, brought a 1000 actuator deformable mirror, beam shaping optics, a vortex mask, and other upgrades to the FIU/FEU. An additional service mission in 2024 extended operations down to y band, delivered an atmospheric dispersion corrector, and provided access to two laser frequency combs. KPIC phase II brings higher planet throughput, lower stellar leakage and many new observing modes which extend its ability to characterize exoplanets at high spectral resolution, building on the success of phase I. In this paper we present a description of the final phase II version of KPIC, along with results of system level laboratory testing and characterization showing the instrument's phase II throughput, stability, repeatability, and other key performance metrics prior to delivery and during installation at Keck. We outlined the capabilities of the various observing modes enabled by the new modules as well as efforts to compensate for static aberrations and non common path errors at Keck, which were issues that plagued phase I. Finally, we show results from commissioning.
△ Less
Submitted 3 February, 2025;
originally announced February 2025.
-
2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments
Authors:
Nemanja Jovanovic,
Pradip Gatkine,
Narsireddy Anugu,
Rodrigo Amezcua-Correa,
Ritoban Basu Thakur,
Charles Beichman,
Chad Bender,
Jean-Philippe Berger,
Azzurra Bigioli,
Joss Bland-Hawthorn,
Guillaume Bourdarot,
Charles M. Bradford,
Ronald Broeke,
Julia Bryant,
Kevin Bundy,
Ross Cheriton,
Nick Cvetojevic,
Momen Diab,
Scott A. Diddams,
Aline N. Dinkelaker,
Jeroen Duis,
Stephen Eikenberry,
Simon Ellis,
Akira Endo,
Donald F. Figer
, et al. (55 additional authors not shown)
Abstract:
Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio…
▽ More
Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Flattening laser frequency comb spectra with a high dynamic range, broadband spectral shaper on-a-chip
Authors:
Nemanja Jovanovic,
Pradip Gatkine,
Boqiang Shen,
Maodong Gao,
Nick Cvetojevic,
Katarzyna Lawniczuk,
Ronald Broeke,
Charles Beichman,
Stephanie Leifer,
Jeffery Jewell,
Gautam Vasisht,
Dimitri Mawet
Abstract:
Spectral shaping is critical to many fields of science. In astronomy for example, the detection of exoplanets via the Doppler effect hinges on the ability to calibrate a high resolution spectrograph. Laser frequency combs can be used for this, but the wildly varying intensity across the spectrum can make it impossible to optimally utilize the entire comb, leading to a reduced overall precision of…
▽ More
Spectral shaping is critical to many fields of science. In astronomy for example, the detection of exoplanets via the Doppler effect hinges on the ability to calibrate a high resolution spectrograph. Laser frequency combs can be used for this, but the wildly varying intensity across the spectrum can make it impossible to optimally utilize the entire comb, leading to a reduced overall precision of calibration. To circumvent this, astronomical applications of laser frequency combs rely on a bulk optic setup which can flatten the output spectrum before sending it to the spectrograph. Such flatteners require complex and expensive optical elements like spatial light modulators and have non-negligible bench top footprints. Here we present an alternative in the form of an all-photonic spectral shaper that can be used to flatten the spectrum of a laser frequency comb. The device consists of a circuit etched into a silicon nitride wafer that supports an arrayed-waveguide grating to disperse the light over hundreds of nanometers in wavelength, followed by Mach-Zehnder interferometers to control the amplitude of each channel, thermo-optic phase modulators to phase the channels and a second arrayed-waveguide grating to recombine the spectrum. The demonstrator device operates from 1400 to 1800 nm (covering the astronomical H band), with twenty 20 nm wide channels. The device allows for nearly 40 dBs of dynamic modulation of the spectrum via the Mach-Zehnders , which is greater than that offered by most spatial light modulators. With a superluminescent diode, we reduced the static spectral variation to ~3 dB, limited by the properties of the components used in the circuit and on a laser frequency comb we managed to reduce the modulation to 5 dBs, sufficient for astronomical applications.
△ Less
Submitted 3 October, 2022;
originally announced October 2022.
-
An all-photonic, dynamic device for flattening the spectrum of a laser frequency comb for precise calibration of radial velocity measurements
Authors:
Nemanja Jovanovic,
Pradip Gatkine,
Boqiang Shen,
Maodong Gao,
Nick Cvetojevic,
Katarzyna Ławniczuk,
Ronald Broeke,
Charles Beichman,
Stephanie Leifer,
Jeffery Jewell,
Gautam Vasisht,
Dimitri Mawet
Abstract:
Laser frequency combs are fast becoming critical to reaching the highest radial velocity precisions. One shortcoming is the highly variable brightness of the comb lines across the spectrum (up to 4-5 orders of magnitude). This can result in some lines saturating while others are at low signal and lost in the noise. Losing lines to either of these effects reduces the precision and hence effectivene…
▽ More
Laser frequency combs are fast becoming critical to reaching the highest radial velocity precisions. One shortcoming is the highly variable brightness of the comb lines across the spectrum (up to 4-5 orders of magnitude). This can result in some lines saturating while others are at low signal and lost in the noise. Losing lines to either of these effects reduces the precision and hence effectiveness of the comb. In addition, the brightness of the comb lines can vary with time which could drive comb lines with initially reasonable SNR's into the two regimes described above. To mitigate these two effects, laser frequency combs use optical flattener's.
Flattener's are typically bulk optic setups that disperse the comb light with a grating, and then use a spatial light modulator to control the amplitude across the spectrum before recombining the light into another single mode fiber and sending it to the spectrograph. These setups can be large (small bench top), expensive (several hundred thousand dollars) and have limited stability. To address these issues, we have developed an all-photonic spectrum flattener on a chip. The device is constructed from optical waveguides on a SiN chip. The light from the laser frequency comb's output optical fiber can be directly connected to the chip, where the light is first dispersed using an arrayed waveguide grating. To control the brightness of each channel, the light is passed through a Mach-Zehnder interferometer before being recombined with a second arrayed waveguide grating. Thermo-optic phase modulators are used in each channel before recombination to path length match the channels as needed.
Here we present the results from our first generation prototype. The device operates from 1400-1800 nm (covering the H band), with 20, 20 nm wide channels.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
Against Fundamentalism
Authors:
Matthew Saul Leifer
Abstract:
In this essay, I argue that the idea that there is a most fundamental discipline, or level of reality, is mistaken. My argument is a result of my experiences with the "science wars", a debate that raged between scientists and sociologists in the 1990's over whether science can lay claim to objective truth. These debates shook my faith in physicalism, i.e. the idea that everything boils down to phy…
▽ More
In this essay, I argue that the idea that there is a most fundamental discipline, or level of reality, is mistaken. My argument is a result of my experiences with the "science wars", a debate that raged between scientists and sociologists in the 1990's over whether science can lay claim to objective truth. These debates shook my faith in physicalism, i.e. the idea that everything boils down to physics. I outline a theory of knowledge that I first proposed in my 2015 FQXi essay on which knowledge has the structure of a scale-free network. In this theory, although some disciplines are in a sense "more fundamental" than others, we never get to a "most fundamental" discipline. Instead, we get hubs of knowledge that have equal importance. This structure can explain why many physicists believe that physics is fundamental, while some sociologists believe that sociology is fundamental.
This updated version of the essay includes and appendix with my responses to the discussion of this essay on the FQXi website.
△ Less
Submitted 11 October, 2018;
originally announced October 2018.
-
Searching for Exoplanets Using a Microresonator Astrocomb
Authors:
Myoung-Gyun Suh,
Xu Yi,
Yu-Hung Lai,
S. Leifer,
Ivan S. Grudinin,
G. Vasisht,
Emily C. Martin,
Michael P. Fitzgerald,
G. Doppmann,
J. Wang,
D. Mawet,
Scott B. Papp,
Scott A. Diddams,
C. Beichman,
Kerry Vahala
Abstract:
Detection of weak radial velocity shifts of host stars induced by orbiting planets is an important technique for discovering and characterizing planets beyond our solar system. Optical frequency combs enable calibration of stellar radial velocity shifts at levels required for detection of Earth analogs. A new chip-based device, the Kerr soliton microcomb, has properties ideal for ubiquitous applic…
▽ More
Detection of weak radial velocity shifts of host stars induced by orbiting planets is an important technique for discovering and characterizing planets beyond our solar system. Optical frequency combs enable calibration of stellar radial velocity shifts at levels required for detection of Earth analogs. A new chip-based device, the Kerr soliton microcomb, has properties ideal for ubiquitous application outside the lab and even in future space-borne instruments. Moreover, microcomb spectra are ideally suited for astronomical spectrograph calibration and eliminate filtering steps required by conventional mode-locked-laser frequency combs. Here, for the calibration of astronomical spectrographs, we demonstrate an atomic/molecular line-referenced, near-infrared soliton microcomb. Efforts to search for the known exoplanet HD 187123b were conducted at the Keck-II telescope as a first in-the-field demonstration of microcombs.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
Mathematics Is Physics
Authors:
M. S. Leifer
Abstract:
In this essay, I argue that mathematics is a natural science---just like physics, chemistry, or biology---and that this can explain the alleged "unreasonable" effectiveness of mathematics in the physical sciences. The main challenge for this view is to explain how mathematical theories can become increasingly abstract and develop their own internal structure, whilst still maintaining an appropriat…
▽ More
In this essay, I argue that mathematics is a natural science---just like physics, chemistry, or biology---and that this can explain the alleged "unreasonable" effectiveness of mathematics in the physical sciences. The main challenge for this view is to explain how mathematical theories can become increasingly abstract and develop their own internal structure, whilst still maintaining an appropriate empirical tether that can explain their later use in physics. In order to address this, I offer a theory of mathematical theory-building based on the idea that human knowledge has the structure of a scale-free network and that abstract mathematical theories arise from a repeated process of replacing strong analogies with new hubs in this network. This allows mathematics to be seen as the study of regularities, within regularities, within ..., within regularities of the natural world. Since mathematical theories are derived from the natural world, albeit at a much higher level of abstraction than most other scientific theories, it should come as no surprise that they so often show up in physics.
This version of the essay contains an addendum responding to Slyvia Wenmackers' essay and comments that were made on the FQXi website.
△ Less
Submitted 11 August, 2015;
originally announced August 2015.
-
Demonstration of a Near-IR Laser Comb for Precision Radial Velocity Measurements in Astronomy
Authors:
X. Yi,
K. Vahala,
S. Diddams,
G. Ycas,
P. Plavchan,
S. Leifer,
J. Sandhu,
G. Vasisht,
P. Chen,
P. Gao,
J. Gagne,
E. Furlan,
M. Bottom,
E. Martin,
M. Fitzgerald,
G. Doppmann,
C. Beichman
Abstract:
We describe a successful effort to produce a laser comb around 1.55 $μ$m in the astronomical H band using a method based on a line-referenced, electro-optical-modulation frequency comb. We discuss the experimental setup, laboratory results, and proof of concept demonstrations at the NASA Infrared Telescope Facility (IRTF) and the Keck-II telescope. The laser comb has a demonstrated stability of…
▽ More
We describe a successful effort to produce a laser comb around 1.55 $μ$m in the astronomical H band using a method based on a line-referenced, electro-optical-modulation frequency comb. We discuss the experimental setup, laboratory results, and proof of concept demonstrations at the NASA Infrared Telescope Facility (IRTF) and the Keck-II telescope. The laser comb has a demonstrated stability of $<$ 200 kHz, corresponding to a Doppler precision of ~0.3 m/s. This technology, when coupled with a high spectral resolution spectrograph, offers the promise of $<$1 m/s radial velocity precision suitable for the detection of Earth-sized planets in the habitable zones of cool M-type stars.
△ Less
Submitted 11 January, 2015;
originally announced January 2015.
-
"It from bit" and the quantum probability rule
Authors:
M. S. Leifer
Abstract:
I argue that, on the subjective Bayesian interpretation of probability, "it from bit" requires a generalization of probability theory. This does not get us all the way to the quantum probability rule because an extra constraint, known as noncontextuality, is required. I outline the prospects for a derivation of noncontextuality within this approach and argue that it requires a realist approach to…
▽ More
I argue that, on the subjective Bayesian interpretation of probability, "it from bit" requires a generalization of probability theory. This does not get us all the way to the quantum probability rule because an extra constraint, known as noncontextuality, is required. I outline the prospects for a derivation of noncontextuality within this approach and argue that it requires a realist approach to physics, or "bit from it". I then explain why this does not conflict with "it from bit". This version of the essay includes an addendum responding to the open discussion that occurred on the FQXi website. It is otherwise identical to the version submitted to the contest.
△ Less
Submitted 17 May, 2014; v1 submitted 4 November, 2013;
originally announced November 2013.
