-
Modelling of shattered pellet injection experiments on the ASDEX Upgrade tokamak
Authors:
Ansh Patel,
Akinobu Matsuyama,
Gergely Papp,
Michael Lehnen,
J Artola,
Stefan Jachmich,
Emiliano Fable,
Alexander Bock,
Bernd Kurzan,
Matthias Hölzl,
Weikang Tang,
Michael Dunne,
Rainer Fischer,
Paul Heinrich,
The ASDEX Upgrade Team,
The EUROfusion Tokamak Exploitation Team
Abstract:
In a shattered pellet injection (SPI) system the penetration and assimilation of the injected material depends on the speed and size distribution of the SPI fragments. ASDEX Upgrade (AUG) was recently equipped with a flexible SPI to study the effect of these parameters on disruption mitigation efficiency. In this paper we study the impact of different parameters on SPI assimilation with the 1.5D I…
▽ More
In a shattered pellet injection (SPI) system the penetration and assimilation of the injected material depends on the speed and size distribution of the SPI fragments. ASDEX Upgrade (AUG) was recently equipped with a flexible SPI to study the effect of these parameters on disruption mitigation efficiency. In this paper we study the impact of different parameters on SPI assimilation with the 1.5D INDEX code. Scans of fragment sizes, speeds and different pellet compositions are carried out for single SPI into AUG H-mode plasmas. We use a semi-empirical thermal quench (TQ) onset condition to study the material assimilation trends. For mixed deuterium-neon pellets, smaller/faster fragments start to assimilate quicker. However, at the expected onset of the global reconnection event (GRE),larger/faster fragments end up assimilating more material. Variations in the injected neon content lead to a large difference in the assimilated neon for neon content below $< 10^{21}$ atoms. For larger injected neon content, a self-regulating mechanism limits the variation in the amount of assimilated neon. We use a back-averaging model to simulate the plasmoid drift during pure deuterium injections with the back-averaging parameter determined by a interpretative simulation of an experimental pure deuterium injection discharge. Again, larger and faster fragments are found to lead to higher assimilation with the material assimilation limited to the plasma edge in general, due to the plasmoid drift. The trends of assimilation for varying fragment sizes, speeds and pellet composition qualitatively agree with the previously reported experimental observations.
△ Less
Submitted 13 February, 2025;
originally announced February 2025.
-
An upper pressure limit for low-Z benign termination of runaway electron beams in TCV
Authors:
M Hoppe,
J Decker,
U Sheikh,
S Coda,
C Colandrea,
B Duval,
O Ficker,
P Halldestam,
S Jachmich,
M Lehnen,
H Reimerdes,
C Paz-Soldan,
M Pedrini,
C Reux,
L Simons,
B Vincent,
T Wijkamp,
M Zurita,
the TCV team,
the EUROfusion Tokamak Exploitation Team
Abstract:
We present a model for the particle balance in the post-disruption runaway electron plateau phase of a tokamak discharge. The model is constructed with the help of, and applied to, experimental data from TCV discharges investigating the so-called ``low-Z benign termination'' runaway electron mitigation scheme. In the benign termination scheme, the free electron density is first reduced in order fo…
▽ More
We present a model for the particle balance in the post-disruption runaway electron plateau phase of a tokamak discharge. The model is constructed with the help of, and applied to, experimental data from TCV discharges investigating the so-called ``low-Z benign termination'' runaway electron mitigation scheme. In the benign termination scheme, the free electron density is first reduced in order for a subsequently induced MHD instability to grow rapidly and spread the runaway electrons widely across the wall. We show that the observed non-monotonic dependence of the free electron density with the measured neutral pressure is due to plasma re-ionization induced by runaway electron impact ionization. At higher neutral pressures, more target particles are present in the plasma for runaway electrons to collide with and ionize. Parameter scans are conducted to clarify the role of the runaway electron density and energy on the free electron density, and it is found that only the runaway electron density has a noticeable impact. While the free electron density is shown to be related to the spread of heat fluxes at termination, the exact cause for the upper neutral pressure limit remains undetermined and an object for further study.
△ Less
Submitted 15 June, 2025; v1 submitted 19 December, 2024;
originally announced December 2024.
-
Non-linear MHD modelling of shattered pellet injection in ASDEX Upgrade
Authors:
W. Tang,
M. Hoelzl,
M. Lehnen,
D. Hu,
F. J. Artola,
P. Halldestam,
P. Heinrich,
S. Jachmich,
E. Nardon,
G. Papp,
A. Patel,
the ASDEX Upgrade Team,
the EUROfusion Tokamak Exploitation Team,
the JOREK Team
Abstract:
Shattered pellet injection (SPI) is selected for the disruption mitigation system in ITER, due to deeper penetration, expected assimilation efficiency and prompt material delivery. This article describes non-linear magnetohydrodynamic (MHD) simulations of SPI in the ASDEX Upgrade tokamak to test the mitigation efficiency of different injection parameters for neon-doped deuterium pellets using the…
▽ More
Shattered pellet injection (SPI) is selected for the disruption mitigation system in ITER, due to deeper penetration, expected assimilation efficiency and prompt material delivery. This article describes non-linear magnetohydrodynamic (MHD) simulations of SPI in the ASDEX Upgrade tokamak to test the mitigation efficiency of different injection parameters for neon-doped deuterium pellets using the JOREK code. The simulations are executed as fluid simulations, while additional marker particles are used to evolve the charge state distribution and radiation property of impurities based on OpenADAS atomic data, i.e., a collisional-radiative model is used. Neon fraction scans between 0 - 10% are performed. Numerical results show that the thermal quench (TQ) occurs in two stages. In the first stage, approximately half of the thermal energy is abruptly lost, primarily through convective and conductive transport in the stochastic fields. This stage is relatively independent of the neon fraction. In the second stage, where the majority of the remaining thermal energy is lost, radiation plays a dominant role. In case of pure deuterium injection, this second stage may not occur at all. A larger fraction ($\sim $20%) of the total material in the pellet is assimilated in the plasma for low neon fraction pellets ($\leq 0.12\%$) due to the full thermal collapse of the plasma occurring later than in high neon fraction scenarios. Nevertheless, the total number of assimilated neon atoms increases with increasing neon fraction. The effects of fragment size and penetration speed are then numerically studied, showing that slower and smaller fragments promote edge cooling and the formation of a cold front. Faster fragments result in shorter TQ duration and higher assimilation as they reach the hotter plasma regions quicker.
△ Less
Submitted 26 June, 2025; v1 submitted 4 December, 2024;
originally announced December 2024.
-
Radiated energy fraction of SPI-induced disruptions at ASDEX Upgrade
Authors:
Paul Heinrich,
Gergely Papp,
Stefan Jachmich,
Javier Artola,
Matthias Bernert,
Pascal de Marné,
Mathias Dibon,
Ralph Dux,
Thomas Eberl,
Jörg Hobirk,
Michael Lehnen,
Tobias Peherstorfer,
Nina Schwarz,
Umar Sheikh,
Bernhard Sieglin,
Jakub Svoboda,
the ASDEX Upgrade Team,
the EUROfusion Tokamak Exploitation Team
Abstract:
Future large tokamaks will operate at high plasma currents and high stored plasma energies. To ensure machine protection in case of a sudden loss of plasma confinement (major disruption), a large fraction of the magnetic and thermal energy must be radiated to reduce thermal loads. The disruption mitigation system for ITER is based on massive material injection in the form of shattered pellet injec…
▽ More
Future large tokamaks will operate at high plasma currents and high stored plasma energies. To ensure machine protection in case of a sudden loss of plasma confinement (major disruption), a large fraction of the magnetic and thermal energy must be radiated to reduce thermal loads. The disruption mitigation system for ITER is based on massive material injection in the form of shattered pellet injection (SPI). To support ITER, a versatile SPI system was installed at the tokamak ASDEX Upgrade (AUG). The AUG SPI features three independent pellet generation cells and guide tubes, and each was equipped with different shatter heads for the 2022 experimental campaign. We dedicated over 200 plasma discharges to the study of SPI plasma termination, and in this manuscript report on the results of bolometry (total radiation) analysis. The amount of neon inside the pellets is the dominant factor determining the radiated energy fraction ($f_{rad}$). Large and fast fragments, produced by the 12.5° rectangular shatter head, lead to somewhat higher values of frad compared to the 25° circular or rectangular heads. This effect is strongest for neon content of $< 3\times10^{20}$ neon atoms ($f_\textrm{neon} \lesssim 1.25\%$ neon) injected, where a lower normal velocity component (larger fragments) seems slightly beneficial. While full-sized, 8 mm diameter, 100% deuterium ($D_2$) pellets lead to a disruption, the 4 mm or shortened 8 mm pellets of 100% $D_2$ did not. The disruption threshold for 100% $D_2$ is found to be around $1\times10^{22}$ $D_2$ molecules inside the pellet. While the radiated energy fraction of non-disruptive SPI is below 20%, this is increased to 40% during the TQ and VDE phase of the disruptive injections. For ($D_2$-Ne-mix pellets, frad values of $< 90$% are observed, and the curve saturates around 80% for 10% neon mixed into the 8 mm pellets ($2\times10^{21}$ neon atoms).
△ Less
Submitted 16 April, 2025; v1 submitted 1 October, 2024;
originally announced October 2024.
-
Axisymmetric predictions for mitigated and vertically unstable disruptions in ITER with runaway electrons
Authors:
V. Bandaru,
M. Hoelzl,
F. J. Artola,
M. Lehnen,
JOREK team
Abstract:
We present two-dimensional global simulations of mitigated and vertically unstable disruptions in ITER in the presence of runaway electrons. An elongated plasma in free-boundary equilibrium is subjected to an artificial thermal quench and current-profile flattening, followed by one or more massive material injections and RE avalanche. Scenarios of major disruptions as well as upward and downward v…
▽ More
We present two-dimensional global simulations of mitigated and vertically unstable disruptions in ITER in the presence of runaway electrons. An elongated plasma in free-boundary equilibrium is subjected to an artificial thermal quench and current-profile flattening, followed by one or more massive material injections and RE avalanche. Scenarios of major disruptions as well as upward and downward vertical displacement events are considered. Results provide important insights into the effects of runaway electron formation, post thermal quench current-profile, injection quantities and timings, and impurity flushout on the overall evolution of disruption and the plasma vertical motion thereof. Interplay between the various effects offers scope for potentially beneficial runaway electron mitigation scenarios.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations
Authors:
D. Hu,
F. J. Artola,
E. Nardon,
M. Lehnen,
M. Kong,
D. Bonfiglio,
M. Hoelzl,
G. T. A. Huijsmans,
JOREK Team
Abstract:
The heat flux mitigation during the Thermal Quench (TQ) by the Shattered Pellet Injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma, and is ultimately checked by the heat deposition on to the PFCs. To investigate this, JOREK simulations of neon-mixed dual-SPIs into ITER baseline H-mode and a "degr…
▽ More
The heat flux mitigation during the Thermal Quench (TQ) by the Shattered Pellet Injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma, and is ultimately checked by the heat deposition on to the PFCs. To investigate this, JOREK simulations of neon-mixed dual-SPIs into ITER baseline H-mode and a "degraded H-mode" with and without good injector synchronization are performed with focus on the first wall heat flux and its energy impact. It is found that low neon fraction SPIs into the baseline H-mode plasmas exhibit strong major radial plasmoid drift as the fragments arrive at the pedestal, accompanied by edge stochasticity. Significant density expulsion and outgoing heat flux occurs as a result, reducing the mitigation efficiency. Such drift motion could be mitigated by injecting higher neon fraction pellets', or by considering the pre-disruption confinement degradation, thus improving the radiation fraction. The radiation heat flux is found to peak in the vicinity of the fragment injection location in the early injection phase, while it relaxes later on due to parallel impurity transport. The overall radiation asymmetry could be significantly mitigated by good synchronization. Time integration of the local heat flux is carried out to provide its energy impact for wall heat damage assessment. For the baseline H-mode case with full pellet injection, melting of the stainless steel of the diagnostic port could occur near the injection port, which is acceptable, without any melting of the first wall tungsten tiles. For the degraded H-mode cases with quarter-pellet SPIs, which have 1/4 total volume of a full pellet, the maximum energy impact approaches the tolerable limit of the stainless steel with un-synchronized SPIs, and stays well below such limit for the perfectly synchronized ones.
△ Less
Submitted 7 June, 2024;
originally announced June 2024.
-
Runaway Electron Dynamics in ITER Disruptions with Shattered Pellet Injections
Authors:
Oskar Vallhagen,
Lise Hanebring,
Javier Artola,
Michael Lehnen,
Eric Nardon,
Tünde Fülöp,
Mathias Hoppe,
Sarah Newton,
Istvan Pusztai
Abstract:
This study systematically explores the parameter space of disruption mitigation through shattered pellet injection in ITER with a focus on runaway electron dynamics, using the disruption modelling tool DREAM. The physics fidelity is considerably increased compared to previous studies, by e.g., using realistic magnetic geometry, resistive wall configuration, thermal quench onset criteria, as well a…
▽ More
This study systematically explores the parameter space of disruption mitigation through shattered pellet injection in ITER with a focus on runaway electron dynamics, using the disruption modelling tool DREAM. The physics fidelity is considerably increased compared to previous studies, by e.g., using realistic magnetic geometry, resistive wall configuration, thermal quench onset criteria, as well as including additional effects, such as ion transport and enhanced runaway electron transport during the thermal quench. The work aims to provide a fairly comprehensive coverage of experimentally feasible scenarios, considering plasmas representative of both non-activated and high-performance DT operation, different thermal quench onset criteria and transport levels, a wide range of hydrogen and neon quantities injected in one or two stages, and pellets with various characteristic shard sizes. Using a staggered injection scheme, with a pure hydrogen injection preceding a mixed hydrogen-neon injection, we find injection parameters leading to acceptable runaway electron currents in all investigated discharges without activated runaway sources. Dividing the injection into two stages is found to significantly enhance the assimilation and minimize runaway electron generation due to the hot-tail mechanism. However, while a staggered injection outperforms a single stage injection also in cases with radioactive runaway electron sources, no cases with acceptable runaway electron currents are found for a DT-plasma with a 15 MA plasma current.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
Lagrangian particle simulation of hydrogen pellets and SPI into runaway electron beam in ITER
Authors:
Shaohua Yuan,
Nizar Naitlho,
Roman Samulyak,
Bernard Pégourié,
Eric Nardon,
Eric Hollmann,
Paul Parks,
Michael Lehnen
Abstract:
Numerical studies of the ablation of pellets and shattered pellet injection (SPI) fragments into a runaway electron beam in ITER have been performed using a time-dependent pellet ablation code [R. Samulyak at el., Nucl Fusion, 61 (4), 046007 (2021)]. The code resolves detailed ablation physics near pellet fragments and large-scale expansion of ablated clouds. The study of a single fragment ablatio…
▽ More
Numerical studies of the ablation of pellets and shattered pellet injection (SPI) fragments into a runaway electron beam in ITER have been performed using a time-dependent pellet ablation code [R. Samulyak at el., Nucl Fusion, 61 (4), 046007 (2021)]. The code resolves detailed ablation physics near pellet fragments and large-scale expansion of ablated clouds. The study of a single fragment ablation quantifies the influence of various factors, in particular the impact ionization by runaway electrons and cross-field transport models, on the dynamics of ablated plasma and its penetration into the runaway beam. Simulations of SPI performed using different numbers of pellet fragments study the formation and evolution of ablation clouds and their large-scale dynamics in ITER. The penetration depth of ablation clouds is found to be of the order of 50 cm.
△ Less
Submitted 20 July, 2022;
originally announced July 2022.
-
Complete 3D MHD simulations of the current quench phase of ITER mitigated disruptions
Authors:
F. J. Artola,
A. Loarte,
M. Hoelzl,
M. Lehnen,
N. Schwarz,
the JOREK team
Abstract:
Complete 3D simulations of the current quench phase of ITER disruptions are key to predict asymmetric forces acting into the ITER wall. We present for the first time such simulations for ITER mitigated disruptions at realistic Lundquist numbers. For these strongly mitigated disruptions, we find that the edge safety factor remains above 2 and the maximal integral horizontal forces remain below 1 MN…
▽ More
Complete 3D simulations of the current quench phase of ITER disruptions are key to predict asymmetric forces acting into the ITER wall. We present for the first time such simulations for ITER mitigated disruptions at realistic Lundquist numbers. For these strongly mitigated disruptions, we find that the edge safety factor remains above 2 and the maximal integral horizontal forces remain below 1 MN. The maximal integral vertical force is found to be 13 MN and arises in a time scale given by the resistive wall time as expected from theoretical considerations. In this respect, the vertical force arises after the plasma current has completely decayed, showing the importance of continuing the simulations also in the absence of plasma current. We conclude that the horizontal wall force rotation is not a concern for these strongly mitigated disruptions in ITER, since when the wall forces form, there are no remaining sources of rotation.
△ Less
Submitted 10 December, 2021;
originally announced December 2021.
-
Collisional-radiative non-equilibrium impurity treatment for JOREK simulations
Authors:
D. Hu,
G. T. A. Huijsmans,
E. Nardon,
M. Hoelzl,
M. Lehnen,
D. Bonfiglio,
JOREK Team
Abstract:
A collisional-radiative non-equilibrium impurity treatment for JOREK 3D nonlinear magneto-hydrodynamic (MHD) simulations has been developed. The impurities are represented by super-particles flowing along the fluid velocity field lines, while ionizing and recombining independently according to ADAS data and local fluid density and temperature. The non-equilibrium impurity contributions are then pr…
▽ More
A collisional-radiative non-equilibrium impurity treatment for JOREK 3D nonlinear magneto-hydrodynamic (MHD) simulations has been developed. The impurities are represented by super-particles flowing along the fluid velocity field lines, while ionizing and recombining independently according to ADAS data and local fluid density and temperature. The non-equilibrium impurity contributions are then projected back to the fluid field for self-consistent time evolution. A 2D test case is used to compare the new non-equilibrium impurity model against previous Coronal Equilibrium (CE) impurity treatment, as well as to compare the non-equilibrium impurity behavior between the single and the two temperature model. Further, we conduct benchmark with previously published coronal non-equilibrium results by other 3D nonlinear MHD codes such as M3D-C1 and NIMROD. The new non-equilibrium treatment is shown to successfully capture the early phase cooling by weakly ionized impurities which the CE model missed. The benchmarks with M3D-C1 and NIMROD show general agreement in both the integrated quantities and the 2D profile evolution, despite the difference in the atomic model used. The above comparison and benchmark cases demonstrate the capability of the non-equilibrium impurity model for JOREK, paving the way for more sophisticated 3D non-linear Massive Material Injection (MMI) simulations which have important applications in disruption mitigation studies.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Simulations of COMPASS Vertical Displacement Events with a self-consistent model for halo currents including neutrals and sheath boundary conditions
Authors:
F. J. Artola,
A. Loarte,
E. Matveeva,
J. Havlicek,
T. Markovic,
J. Adamek,
J. Cavalier,
L. Kripner,
G. T. A. Huijsmans,
M. Lehnen,
M. Hoelzl,
R. Panek,
COMPASS team,
JOREK team
Abstract:
The understanding of the halo current properties during disruptions is key to design and operate large scale tokamaks in view of the large thermal and electromagnetic loads that they entail. For the first time, we present a fully self-consistent model for halo current simulations including neutral particles and sheath boundary conditions. The model is used to simulate Vertical Displacement Events…
▽ More
The understanding of the halo current properties during disruptions is key to design and operate large scale tokamaks in view of the large thermal and electromagnetic loads that they entail. For the first time, we present a fully self-consistent model for halo current simulations including neutral particles and sheath boundary conditions. The model is used to simulate Vertical Displacement Events (VDEs) occurring in the COMPASS tokamak. Recent COMPASS experiments have shown that the parallel halo current density at the plasma-wall interface is limited by the ion saturation current during VDE-induced disruptions. We show that usual MHD boundary conditions can lead to the violation of this physical limit and we implement this current density limitation through a boundary condition for the electrostatic potential. Sheath boundary conditions for the density, the heat flux, the parallel velocity and a realistic parameter choice (e.g. Spitzer $η$ and Spitzer-Härm $χ_\parallel$ values) extend present VDE simulations beyond the state of the art. Experimental measurements of the current density, temperature and heat flux profiles at the COMPASS divertor are compared with the results obtained from axisymmetric simulations. Since the ion saturation current density ($J_{sat}$) is shown to be essential to determine the halo current profile, parametric scans are performed to study its dependence on different quantities such as the plasma resistivity and the particle and heat diffusion coefficients. In this respect, the plasma resistivity in the halo region broadens significantly the $J_{sat}$ profile, increasing the halo width at a similar total halo current.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
Radiation asymmetry and MHD destabilization during the thermal quench after impurity Shattered Pellet Injection
Authors:
D. Hu,
E. Nardon,
M. Hoelzl,
F. Wieschollek,
M. Lehnen,
G. T. A. Huijsmans,
D. C. van Vugt,
S. -H. Kim,
JET contributors,
JOREK Team
Abstract:
The radiation response and the MHD destabilization during the thermal quench after a mixed species Shattered Pellet Injection (SPI) with impurity species neon and argon are investigated via 3D non-linear MHD simulation using the JOREK code. Both the $n=0$ global current profile contraction and the local helical cooling at each rational surface caused by the pellet fragments are found to be respons…
▽ More
The radiation response and the MHD destabilization during the thermal quench after a mixed species Shattered Pellet Injection (SPI) with impurity species neon and argon are investigated via 3D non-linear MHD simulation using the JOREK code. Both the $n=0$ global current profile contraction and the local helical cooling at each rational surface caused by the pellet fragments are found to be responsible for MHD destabilization after the injection. Significant current driven mode growth is observed as the fragments cross low order rational surfaces, resulting in rapidly inward propagating stochastic magnetic field, ultimately causing the core temperature collapse. The Thermal Quench (TQ) is triggered as the fragments arrive on the $q=1$ or $q=2$ surface depending on the exact $q$ profile and thus mode structure. When injecting from a single toroidal location, strong radiation asymmetry is found before and during the TQ as a result of the unrelaxed impurity density profile along the field line and asymmetric outward heat flux. Such asymmetry gradually relaxes over the course of the TQ, and is entirely eliminated by the end of it. Simulation results indicate that the aforementioned asymmetric radiation behavior could be significantly mitigated by injection from toroidally opposite locations, provided that the time delay between the two injectors is shorter than $1ms$. It is also found that the MHD response are sensitive to the relative timing and injection configuration in these multiple injection cases.
△ Less
Submitted 25 November, 2020; v1 submitted 6 September, 2020;
originally announced September 2020.
-
Contrasting H-mode behaviour with deuterium fuelling and nitrogen seeding in the all-carbon and metallic versions of JET
Authors:
G. P. Maddison,
C. Giroud,
B. Alper,
G. Arnoux,
I. Balboa,
M. N. A. Beurskens,
A. Boboc,
S. Brezinsek,
M. Brix,
M. Clever,
R. Coelho,
J. W. Coenen,
I. Coffey,
P. C. da Silva Aresta Belo,
S. Devaux,
P. Devynck,
T. Eich,
R. C. Felton,
J. Flanagan,
L. Frassinetti,
L. Garzotti,
M. Groth,
S. Jachmich,
A. Järvinen,
E. Joffrin
, et al. (26 additional authors not shown)
Abstract:
The former all-carbon wall on JET has been replaced with beryllium in the main torus and tungsten in the divertor to mimic the surface materials envisaged for ITER. Comparisons are presented between Type I H-mode characteristics in each design by examining respective scans over deuterium fuelling and impurity seeding, required to ameliorate exhaust loads both in JET at full capability and in ITER.
The former all-carbon wall on JET has been replaced with beryllium in the main torus and tungsten in the divertor to mimic the surface materials envisaged for ITER. Comparisons are presented between Type I H-mode characteristics in each design by examining respective scans over deuterium fuelling and impurity seeding, required to ameliorate exhaust loads both in JET at full capability and in ITER.
△ Less
Submitted 11 June, 2014;
originally announced June 2014.
-
Impact of nitrogen seeding on confinement and power load control of a high-triangularity JET ELMy H-mode plasma with a metal wall
Authors:
C Giroud,
G P Maddison,
S Jachmich,
F Rimini,
M N A Beurskens,
I Balboa,
S Brezinsek,
R Coelho,
J W Coenen,
L Frassinetti,
E Joffrin,
M Oberkofler,
M Lehnen,
Y Liu,
S Marsen,
K McCormick K,
A Meigs,
R Neu,
B Sieglin,
G van Rooij,
G Arnoux,
P Belo,
M Brix,
M Clever,
I Coffey
, et al. (17 additional authors not shown)
Abstract:
This paper reports the impact on confinement and power load of the high-shape 2.5MA ELMy H-mode scenario at JET of a change from an all carbon plasma facing components to an all metal wall. In preparation to this change, systematic studies of power load reduction and impact on confinement as a result of fuelling in combination with nitrogen seeding were carried out in JET-C and are compared to the…
▽ More
This paper reports the impact on confinement and power load of the high-shape 2.5MA ELMy H-mode scenario at JET of a change from an all carbon plasma facing components to an all metal wall. In preparation to this change, systematic studies of power load reduction and impact on confinement as a result of fuelling in combination with nitrogen seeding were carried out in JET-C and are compared to their counterpart in JET with a metallic wall. An unexpected and significant change is reported on the decrease of the pedestal confinement but is partially recovered with the injection of nitrogen.
△ Less
Submitted 31 October, 2013;
originally announced October 2013.
-
The effect of ITER-like wall on runaway electron generation in JET
Authors:
G. Papp,
T. Fülöp,
T. Fehér,
P. C. de Vries,
V. Riccardo,
C. Reux,
M. Lehnen,
V. Kiptily,
V. V. Plyusnin,
B. Alper,
JET EFDA contributors
Abstract:
This paper investigates the effect of the ITER-like wall (ILW) on runaway electron (RE) generation through a comparative study of similar slow argon injection JET disruptions, performed with different wall materials. In the carbon wall case, a runaway electron plateau is observed, while in the ITER-like wall case, the current quench is slower and the runaway current is negligibly small. The aim of…
▽ More
This paper investigates the effect of the ITER-like wall (ILW) on runaway electron (RE) generation through a comparative study of similar slow argon injection JET disruptions, performed with different wall materials. In the carbon wall case, a runaway electron plateau is observed, while in the ITER-like wall case, the current quench is slower and the runaway current is negligibly small. The aim of the paper is to shed light on the reason for these differences by detailed numerical modelling to study which factors affected the RE formation. The post-disruption current profile is calculated by a one-dimensional model of electric field, temperature and runaway current taking into account the impurity injection. Scans of various impurity contents are performed and agreement with the experimental scenarios is obtained for reasonable argon- and wall impurity contents. Our modelling shows that the reason for the changed RE dynamics is a complex, combined effect of the differences in plasma parameter profiles, the radiation characteristics of beryllium and carbon, and the difference of the injected argon amount. These together lead to a significantly higher Dreicer generation rate in the carbon wall case, which is less prone to be suppressed by RE loss mechanisms. The results indicate that the differences are greatly reduced above ~50% argon content, suggesting that significant RE current is expected in future massive gas injection experiments on both JET and ITER.
△ Less
Submitted 12 August, 2013;
originally announced August 2013.
-
Modelling of magnetic field structure of the Ergodic Divertor of Tore Supra and comparison to the Dynamic Ergodic Divertor of TEXTOR
Authors:
S. S. Abdullaev,
T. Van Rompuy,
K. H. Finken,
M. Lehnen,
M. Jakubowski
Abstract:
An analytical model previously developed to study the structure of the magnetic field for the TEXTOR-DED [S.S. Abdullaev et al. Phys. Plasmas, 6, 153 (1999)] is applied to the similar study of the Ergodic Divertor of Tore Supra tokamak [Ph. Ghendrih, Plasma Phys. Control. Fusion, 38, 1653 (1996)]. The coil configuration of ED Tore Supra consists of six modules equidistantly located along the tor…
▽ More
An analytical model previously developed to study the structure of the magnetic field for the TEXTOR-DED [S.S. Abdullaev et al. Phys. Plasmas, 6, 153 (1999)] is applied to the similar study of the Ergodic Divertor of Tore Supra tokamak [Ph. Ghendrih, Plasma Phys. Control. Fusion, 38, 1653 (1996)]. The coil configuration of ED Tore Supra consists of six modules equidistantly located along the toroidal direction on the low-field-side of the torus with given toroidal and poloidal extensions. The Hamiltonian formulation of field line equations in straight-field-line coordinates (Boozer coordinates) and the computationally efficient mapping method for integration of the Hamiltonian field line equations are used to study the magnetic field structure in the ED. Asymptotical formulas for the perturbation magnetic field created by the ED coils are obtained and the spectrum of magnetic perturbations is analyzed and compared with the one of the TEXTOR-DED. The structure of ergodic and laminar zones are studied by plotting Poincare sections, so-called laminar plots (contour plots of wall to wall connection lengths) and magnetic footprints. The radial profiles of field line diffusion coefficients are calculated for different perturbation currents and it is found that for the Tore Supra case in the ergodic zone the numerical field line diffusion coefficients perfectly follow the quasilinear formula for smaller perturbation currents although the situation is different for the maximum perturbation current.
△ Less
Submitted 10 May, 2008;
originally announced May 2008.
