Showing 1–50 of 421 results for author: Lee, Y

FED-PV: A Large-Scale Synthetic Frame/Event Dataset for Particle-Based Velocimetry

Authors: Fan Wu, Xiang Feng, Aoyu Zhang, Yong Lee

Abstract: Particle-based velocimetry (PV) is a widely used technique for non-invasive flow field measurements in fluid mechanics. Existing PV measurements typically rely on a single type of particle recording. With advancements in deep learning and information fusion, incorporating multiple different particle recordings presents a promising avenue for next-generation PV measurement techniques. However, we a… ▽ More Particle-based velocimetry (PV) is a widely used technique for non-invasive flow field measurements in fluid mechanics. Existing PV measurements typically rely on a single type of particle recording. With advancements in deep learning and information fusion, incorporating multiple different particle recordings presents a promising avenue for next-generation PV measurement techniques. However, we argue that the lack of cross-modal datasets -- combining frame-based recordings and event-based recordings -- represents a significant bottleneck in the development of fusion measurement algorithms. To address this critical gap, we developed a dual-modal data generator FED-PV to synthesize frame-based images and event-based recordings of moving particles, resulting in a 350GB dataset generated using our approach. This generator and dataset will facilitate advancements in novel PV algorithms. △ Less

Submitted 1 July, 2025; originally announced July 2025.

Comments: This work has been accepted as a conference paper at the 16th International Symposium on Particle Image Velocimetry (ISPIV 2025)

Confocal Raman microscopy inside sessile multicomponent droplets

Authors: Alexander Erb, Johanna Steinmann, Youngeun Lee, Robert W. Stark

Abstract: Evaporating multicomponent droplets are ubiquitous and appear in a variety of everyday situations and technological applications, including coating, 3D printing, and energy conversion processes. During evaporation, concentration gradients are typically induced, resulting in flows within the droplets. Many of the mechanisms underlying multicomponent droplet evaporation are not fully understood. How… ▽ More Evaporating multicomponent droplets are ubiquitous and appear in a variety of everyday situations and technological applications, including coating, 3D printing, and energy conversion processes. During evaporation, concentration gradients are typically induced, resulting in flows within the droplets. Many of the mechanisms underlying multicomponent droplet evaporation are not fully understood. However, most methods utilize markers that can be surface active and thus affect droplet dynamics. Thus, high-resolution marker-free measurements of concentration gradients in evaporating multicomponent droplets are needed. Raman microscopy can provide such a method. However, as the Raman laser has to undergo a phase transition, it is refracted, leading to a distorted drop contour. In this study, we model refraction in the droplet to better understand the shift in focus leading to geometric distortion. The horizontal and vertical shifts in focus are analyzed, and a modified configuration that enables Raman measurements with a horizontal laser is introduced. For both configurations, the simulated drop shape in the Raman image fits well with the measured shape. While Raman measurements with a vertically incident laser allow the study of the upper part of the droplet, for droplets with large contact angles, horizontal Raman measurements allow for the analysis of the region around the 3-phase contact line. As an example, a concentration map of an evaporating 4.2 $μ$L glycerol/water droplet is presented. The results of this study can be used as a guide for Raman microscopy measurements of droplets. These findings contribute to understanding droplet dynamics during evaporation and provide a basis for developing novel printing, cleaning, and energy conversion technology applications. △ Less

Submitted 30 June, 2025; originally announced July 2025.

Comments: 13 pages, 12 figures

Investigation of resonant layer response in electron viscosity regime

Authors: Yeongsun Lee, Jace Waybright, Jong-Kyu Park

Abstract: We present a supplementary study of previous work in Waybright and Park [Phys. Plasmas 31, 022502 (2024)] which demonstrates a substantial effect of electron viscosity on the resonant layer response to non-axisymmetric magnetic perturbations. A main refinement is to include a curl element of electron viscosity in the generalized Ohm's law. The refinement reveals a resonant layer response in the El… ▽ More We present a supplementary study of previous work in Waybright and Park [Phys. Plasmas 31, 022502 (2024)] which demonstrates a substantial effect of electron viscosity on the resonant layer response to non-axisymmetric magnetic perturbations. A main refinement is to include a curl element of electron viscosity in the generalized Ohm's law. The refinement reveals a resonant layer response in the Electron Viscosity (EV) regime corresponding to slowly rotating and highly viscous plasmas. △ Less

Submitted 30 June, 2025; originally announced June 2025.

Optical cycling of MgF molecules within the hyperfine states in X(N=1) state

Authors: Kikyeong Kwon, Seunghwan Roh, Youngju Cho, Yongwoong Lee, Eunmi Chae

Abstract: We investigated the optical cycling effect of the $\mathrm{X}^2Σ(v=0,\ N=1^-) - \mathrm{A}^2Π_{1/2}(v'=0,\ J'=1/2^+)$ band of MgF molecules, specifically the $\mathrm{P_1/Q_{12}(1)}$ transition, which serves as the main transition in the quasi-closed cycling scheme for the laser cooling. A higher number of scattered photons was observed when all three frequency components of the… ▽ More We investigated the optical cycling effect of the $\mathrm{X}^2Σ(v=0,\ N=1^-) - \mathrm{A}^2Π_{1/2}(v'=0,\ J'=1/2^+)$ band of MgF molecules, specifically the $\mathrm{P_1/Q_{12}(1)}$ transition, which serves as the main transition in the quasi-closed cycling scheme for the laser cooling. A higher number of scattered photons was observed when all three frequency components of the $\mathrm{P_1/Q_{12}(1)}$ transition were simultaneously applied using acousto-optic modulators (AOMs). Optimal conditions were identified by scanning the detuning of frequency components, the laser beam power ratio, and the total laser beam power, and the results were confirmed through rate equation simulations. Under these optimized conditions, and with an applied magnetic field, the scattering rate was enhanced by approximately a factor of six. These results refine the implementation of optical cycling in MgF and lay the groundwork for laser slowing and magneto-optical trapping (MOT) experiments. △ Less

Submitted 30 June, 2025; originally announced June 2025.

Control of pedestal-top electron density using RMP and gas puff at KSTAR

Authors: Minseok Kim, S. K. Kim, A. Rothstein, P. Steiner, K. Erickson, Y. H. Lee, H. Han, Sang-hee Hahn, J. W. Juhn, B. Kim, R. Shousha, C. S. Byun, J. Butt, ChangMin Shin, J. Hwang, Minsoo Cha, Hiro Farre, S. M. Yang, Q. Hu, D. Eldon, N. C. Logan, A. Jalalvand, E. Kolemen

Abstract: We report the experimental results of controlling the pedestal-top electron density by applying resonant magnetic perturbation with the in-vessel control coils and the main gas puff in the 2024-2025 KSTAR experimental campaign. The density is reconstructed using a parametrized psi_N grid and the five channels of the line-averaged density measured by a two-colored interferometer. The reconstruction… ▽ More We report the experimental results of controlling the pedestal-top electron density by applying resonant magnetic perturbation with the in-vessel control coils and the main gas puff in the 2024-2025 KSTAR experimental campaign. The density is reconstructed using a parametrized psi_N grid and the five channels of the line-averaged density measured by a two-colored interferometer. The reconstruction procedure is accelerated by deploying a multi-layer perceptron to run in about 120 microseconds and is fast enough for real-time control. A proportional-integration controller is adopted, with the controller gains being estimated from the system identification processes. The experimental results show that the developed controller can follow a dynamic target while exclusively using both actuators. The absolute percentage errors between the electron density at psi_N=0.89 and the target are approximately 1.5% median and a 2.5% average value. The developed controller can even lower the density by using the pump-out mechanism under RMP, and it can follow a more dynamic target than a single actuator controller. The developed controller will enable experimental scenario exploration within a shot by dynamically setting the density target or maintaining a constant electron density within a discharge. △ Less

Submitted 25 June, 2025; originally announced June 2025.

Comments: This manuscript has been submitted for publication in Nuclear Fusion

MEMS Switch Enabled Spatiotemporally Modulated Isolators

Authors: Connor Devitt, Yong-bok Lee, Pavitra Jain, Sunil A. Bhave, Xu Zhu, Nicholas Yost, Yabei Gu

Abstract: This work reports the simulation, design, and implementation of a compact MEMS switch based spatiotemporally modulated (STM) bandpass filtering isolator to improve self-interference cancellation (SIC) in underwater acoustic communication networks. Conventional ferrite circulators are unavailable in ultrasonic frequency ranges limiting SIC to techniques such as spatial cancellation and adaptive dig… ▽ More This work reports the simulation, design, and implementation of a compact MEMS switch based spatiotemporally modulated (STM) bandpass filtering isolator to improve self-interference cancellation (SIC) in underwater acoustic communication networks. Conventional ferrite circulators are unavailable in ultrasonic frequency ranges limiting SIC to techniques such as spatial cancellation and adaptive digital cancellation. This study details a sub-megahertz electronic non-magnetic filtering isolator. High power-handling, compact, and reliable MEMS switches enable the periodically time varying filter circuit to be non-reciprocal. A printed circuit board (PCB) implementation shows strong agreement with spectral admittance matrix simulations with a maximum measured isolation of 15.99 dB. In conjunction with digital SIC methods, this isolator can enable in-band full duplex underwater communication, environmental sensing, and imaging. △ Less

Submitted 13 June, 2025; originally announced June 2025.

Van der Waals waveguide quantum electrodynamics probed by infrared nano-photoluminescence

Authors: Samuel L. Moore, Hae Yeon Lee, Nicholas Rivera, Yuzuka Karube, Mark Ziffer, Emanuil S. Yanev, Thomas P. Darlington, Aaron J. Sternbach, Madisen A. Holbrook, Jordan Pack, Xiaodong Xu, Cory R. Dean, Jonathan S. Owen, P. James Schuck, Milan Delor, Xiaoyang Zhu, James Hone, Dmitri N. Basov

Abstract: Atomically layered van der Waals (vdW) materials exhibit remarkable properties, including highly-confined infrared waveguide modes and the capacity for infrared emission in the monolayer limit. Here, we engineered structures that leverage both of these nano-optical functionalities. Specifically, we encased a photoluminescing atomic sheet of MoTe2 within two bulk crystals of WSe2, forming a vdW wav… ▽ More Atomically layered van der Waals (vdW) materials exhibit remarkable properties, including highly-confined infrared waveguide modes and the capacity for infrared emission in the monolayer limit. Here, we engineered structures that leverage both of these nano-optical functionalities. Specifically, we encased a photoluminescing atomic sheet of MoTe2 within two bulk crystals of WSe2, forming a vdW waveguide for the embedded light-emitting monolayer. The modified electromagnetic environment offered by the WSe2 waveguide alters MoTe2 spontaneous emission, a phenomenon we directly image with our interferometric nano-photoluminescence technique. We captured spatially-oscillating nanoscale patterns prompted by spontaneous emission from MoTe2 into waveguide modes of WSe2 slabs. We quantify the resulting Purcell-enhanced emission rate within the framework of a waveguide quantum electrodynamics (QED) model, relating the MoTe2 spontaneous emission rate to the measured waveguide dispersion. Our work marks a significant advance in the implementation of all-vdW QED waveguides. △ Less

Submitted 11 June, 2025; originally announced June 2025.

Comments: 14 pages, 5 Figues. Supplementary information can be found in the journal submission Nat. Photon. (2025)

Inverse Design of Metamaterials with Manufacturing-Guiding Spectrum-to-Structure Conditional Diffusion Model

Authors: Jiawen Li, Jiang Guo, Yuanzhe Li, Zetian Mao, Jiaxing Shen, Tashi Xu, Diptesh Das, Jinming He, Run Hu, Yaerim Lee, Koji Tsuda, Junichiro Shiomi

Abstract: Metamaterials are artificially engineered structures that manipulate electromagnetic waves, having optical properties absent in natural materials. Recently, machine learning for the inverse design of metamaterials has drawn attention. However, the highly nonlinear relationship between the metamaterial structures and optical behaviour, coupled with fabrication difficulties, poses challenges for usi… ▽ More Metamaterials are artificially engineered structures that manipulate electromagnetic waves, having optical properties absent in natural materials. Recently, machine learning for the inverse design of metamaterials has drawn attention. However, the highly nonlinear relationship between the metamaterial structures and optical behaviour, coupled with fabrication difficulties, poses challenges for using machine learning to design and manufacture complex metamaterials. Herein, we propose a general framework that implements customised spectrum-to-shape and size parameters to address one-to-many metamaterial inverse design problems using conditional diffusion models. Our method exhibits superior spectral prediction accuracy, generates a diverse range of patterns compared to other typical generative models, and offers valuable prior knowledge for manufacturing through the subsequent analysis of the diverse generated results, thereby facilitating the experimental fabrication of metamaterial designs. We demonstrate the efficacy of the proposed method by successfully designing and fabricating a free-form metamaterial with a tailored selective emission spectrum for thermal camouflage applications. △ Less

Submitted 8 June, 2025; originally announced June 2025.

Comments: 20 pages, 7 figures

Discrete vortex-based broadcast mode analysis for mitigation of dynamic stall

Authors: Het D. Patel, Yi Tsung Lee, Ashok Gopalarathnam, Chi-An Yeh

Abstract: We integrate a discrete vortex method with complex network analysis to strategize dynamic stall mitigation over a pitching airfoil with active flow control. The objective is to inform actuator placement and timing to introduce control inputs during the transient evolution of dynamic stall. To this end, we represent the massively separated flow as a network of discrete vortical elements and quantif… ▽ More We integrate a discrete vortex method with complex network analysis to strategize dynamic stall mitigation over a pitching airfoil with active flow control. The objective is to inform actuator placement and timing to introduce control inputs during the transient evolution of dynamic stall. To this end, we represent the massively separated flow as a network of discrete vortical elements and quantify the interactions among these vortical nodes by tracking the spread of displacement perturbations between each pair of elements using the discrete vortex method. This enables a network broadcast mode analysis to identify an optimal set of vortices, critical timing, and direction to seed perturbations as control inputs. Motivated by the goal of mitigating dynamic stall, the optimality is defined as minimizing the total circulation of free vortices generated from the leading edge over a prescribed time horizon. We demonstrate the framework on two cases: two-dimensional flow over a flat plate airfoil and three-dimensional turbulent flow over a SD7003 airfoil. The analysis reveals that optimal timing for introducing disturbances occurs just after separation onset, when the shear layer pinches up to form the core of the dynamic stall vortex. Broadcast modes indicate that vortical nodes along the shear layer are optimal for control, guiding actuator placement. Flow simulations validate these insights: placing actuators near the leading edge and triggering them shortly after separation yields a 12% and 30% reduction in peak lift for the flat plate and SD7003 cases, respectively. A corresponding decrease in vorticity injection under control confirms the analysis objective. This study highlights the potential of combining discrete vortex methods with network analysis to guide active flow control in unsteady aerodynamics. △ Less

Submitted 27 June, 2025; v1 submitted 2 June, 2025; originally announced June 2025.

Comments: 22 pages, 14 figures

First measurement of neutron capture multiplicity in neutrino-oxygen neutral-current quasi-elastic-like interactions using an accelerator neutrino beam

Authors: T2K Collaboration, K. Abe, S. Abe, R. Akutsu, H. Alarakia-Charles, Y. I. Alj Hakim, S. Alonso Monsalve, L. Anthony, M. Antonova, S. Aoki, K. A. Apte, T. Arai, T. Arihara, S. Arimoto, Y. Asada, Y. Ashida, N. Babu, G. Barr, D. Barrow, P. Bates, M. Batkiewicz-Kwasniak, V. Berardi, L. Berns, S. Bordoni, S. B. Boyd , et al. (314 additional authors not shown)

Abstract: We report the first measurement of neutron capture multiplicity in neutrino-oxygen neutral-current quasi-elastic-like interactions at the gadolinium-loaded Super-Kamiokande detector using the T2K neutrino beam, which has a peak energy of about 0.6 GeV. A total of 30 neutral-current quasi-elastic-like event candidates were selected from T2K data corresponding to an exposure of $1.76\times10^{20}$ p… ▽ More We report the first measurement of neutron capture multiplicity in neutrino-oxygen neutral-current quasi-elastic-like interactions at the gadolinium-loaded Super-Kamiokande detector using the T2K neutrino beam, which has a peak energy of about 0.6 GeV. A total of 30 neutral-current quasi-elastic-like event candidates were selected from T2K data corresponding to an exposure of $1.76\times10^{20}$ protons on target. The $γ$ ray signals resulting from neutron captures were identified using a neural network. The flux-averaged mean neutron capture multiplicity was measured to be $1.37\pm0.33\text{ (stat.)}$$^{+0.17}_{-0.27}\text{ (syst.)}$, which is compatible within $2.3\,σ$ than predictions obtained using our nominal simulation. We discuss potential sources of systematic uncertainty in the prediction and demonstrate that a significant portion of this discrepancy arises from the modeling of hadron-nucleus interactions in the detector medium. △ Less

Submitted 30 May, 2025; v1 submitted 28 May, 2025; originally announced May 2025.

Comments: 27 pages, 20 figures

Dual-Polarization SHG Interferometry for Imaging Antiparallel Domains and Stacking Angles of 2D Heterocrystals

Authors: Juseung Oh, Wontaek Kim, Gyouil Jeong, Yeri Lee, Jihun Kim, Hyeongjoon Kim, Hyeon Suk Shin, Sunmin Ryu

Abstract: Optical second-harmonic generation (SHG) enables orientational polarimetry for crystallographic analysis and domain imaging of various materials. However, conventional intensity polarimetry, which neglects phase information, fails to resolve antiparallel domains and to describe two-dimensional heterostructures, which represent a new class of van der Waals-bound composite crystals. In this work, we… ▽ More Optical second-harmonic generation (SHG) enables orientational polarimetry for crystallographic analysis and domain imaging of various materials. However, conventional intensity polarimetry, which neglects phase information, fails to resolve antiparallel domains and to describe two-dimensional heterostructures, which represent a new class of van der Waals-bound composite crystals. In this work, we report dual-polarization spectral phase interferometry (DP-SPI) and establish a generalized SHG superposition model that incorporates the observables of DP-SPI. Antiparallel domains of monolayer transition metal dichalcogenides (TMDs) were successfully imaged with distinction, validating the interferometric polarimetry. From DP interferograms of TMD heterobilayers, the orientation of each layer could be determined, enabling layer-resolved probing. By employing the superposition model, we also demonstrate the photonic design and fabrication of ternary TMD heterostructures for circularly polarized SHG. These methods, providing comprehensive SHG measurements and theoretical description, can be extended to heterostructures consisting of more than two constituent layers and are not limited to TMDs or 2D materials. △ Less

Submitted 27 May, 2025; originally announced May 2025.

Comments: 26 pages, 5 figures

SpectraMatcher: A Python Program for Interactive Analysis and Peak Assignment of Vibronic Spectra

Authors: Johanna Langner, Isabelle Weber, Henryk A. Witek, Yuan-Pern Lee

Abstract: SpectraMatcher is a cross-platform desktop application for interactive comparison of experimental and computed vibronic spectra, designed to assist in the recognition and assignment of spectral patterns. It provides an intuitive graphical interface -- with no coding or scripting required -- for importing experimental spectra, visualizing them alongside the corresponding theoretical spectra constru… ▽ More SpectraMatcher is a cross-platform desktop application for interactive comparison of experimental and computed vibronic spectra, designed to assist in the recognition and assignment of spectral patterns. It provides an intuitive graphical interface -- with no coding or scripting required -- for importing experimental spectra, visualizing them alongside the corresponding theoretical spectra constructed from Gaussian frequency calculations, and adjusting key parameters such as peak width, intensity scaling factors, and vibration-type-specific anharmonic corrections. SpectraMatcher features an automated peak-matching algorithm that assigns experimental and computed peaks based on their intensity ratio and proximity. Assignments and spectra can be exported in multiple formats for publication or for further analysis. The software remains responsive even for large datasets, and supports efficient and reproducible interpretation of vibronic spectra. △ Less

Submitted 13 May, 2025; originally announced May 2025.

Comments: 14 pages, 3 figures, 1 table

ACM Class: J.2

A Model of UV-Blue Absorbance in Bulk Liquid of Venusian Cloud Aerosols Is Consistent with Efficient Organic Absorbers at High Concentrations

Authors: Jan Spacek, Yeon J. Lee, Paul B. Rimmer, Janusz J. Petkowski

Abstract: At visible wavelengths, Venus appears serene and pale-yellow, but since the 1920s, observers have noted high-contrast features in the ultraviolet. These features track the about 4-day superrotation of the upper cloud deck and vary widely over time and space. The identity of the UV absorber(s)-active between at least 280 and 500 nm-remains unknown, as no proposed candidate fully matches all observa… ▽ More At visible wavelengths, Venus appears serene and pale-yellow, but since the 1920s, observers have noted high-contrast features in the ultraviolet. These features track the about 4-day superrotation of the upper cloud deck and vary widely over time and space. The identity of the UV absorber(s)-active between at least 280 and 500 nm-remains unknown, as no proposed candidate fully matches all observational data. From remote observations of Venus, and accounting for light scattering by sub-micrometer droplets, we modeled the 365-455 nm absorbance per cm of the bulk liquids forming Venus's clouds. Assuming a uniform distribution in mode 1 and 2 particles across a 6 km layer below the cloud top at 65 km, we constrain the bulk absorbance with a peak at A375 nm being 2942 per cm. This extremely high absorbance implies the presence of a highly efficient absorber, most likely conjugated organics, at relatively high concentration-e.g. about 25 g/L for porphyrin type pigments. Inorganic absorbers, with molar absorption coefficients typically in the range of 1,000-10,000 per M per cm, would either need to comprise a large portion of the aerosols or are simply not light absorbent enough, even if present in pure form. We emphasize that all candidate absorbers must be evaluated against Venus's reflectance curve using (i) known molar absorption coefficients, (ii) realistic atmospheric distributions, and (iii) appropriate particle size distributions. The upcoming Rocket Lab mission will test the hypothesis of organics in Venus's clouds. △ Less

Submitted 1 May, 2025; originally announced May 2025.

FourierSpecNet: Neural Collision Operator Approximation Inspired by the Fourier Spectral Method for Solving the Boltzmann Equation

Authors: Jae Yong Lee, Gwang Jae Jung, Byung Chan Lim, Hyung Ju Hwang

Abstract: The Boltzmann equation, a fundamental model in kinetic theory, describes the evolution of particle distribution functions through a nonlinear, high-dimensional collision operator. However, its numerical solution remains computationally demanding, particularly for inelastic collisions and high-dimensional velocity domains. In this work, we propose the Fourier Neural Spectral Network (FourierSpecNet… ▽ More The Boltzmann equation, a fundamental model in kinetic theory, describes the evolution of particle distribution functions through a nonlinear, high-dimensional collision operator. However, its numerical solution remains computationally demanding, particularly for inelastic collisions and high-dimensional velocity domains. In this work, we propose the Fourier Neural Spectral Network (FourierSpecNet), a hybrid framework that integrates the Fourier spectral method with deep learning to approximate the collision operator in Fourier space efficiently. FourierSpecNet achieves resolution-invariant learning and supports zero-shot super-resolution, enabling accurate predictions at unseen resolutions without retraining. Beyond empirical validation, we establish a consistency result showing that the trained operator converges to the spectral solution as the discretization is refined. We evaluate our method on several benchmark cases, including Maxwellian and hard-sphere molecular models, as well as inelastic collision scenarios. The results demonstrate that FourierSpecNet offers competitive accuracy while significantly reducing computational cost compared to traditional spectral solvers. Our approach provides a robust and scalable alternative for solving the Boltzmann equation across both elastic and inelastic regimes. △ Less

Submitted 29 April, 2025; originally announced April 2025.

Comments: 27 pages, 11 figures

MSC Class: 68T20; 35Q20; 35B40; 82C40

Continuous coherent perfect absorption and lasing at an exceptional point of anti-parity-time symmetric photonic structures

Authors: Jeng Yi Lee

Abstract: We consider a type of hypothetical compound materials in which its refractive index in spatial distribution meet $n(-x)=-n^{*}(x)$, belonging to anti-parity-time (APT) symmetric structures. Additionally, we demand balanced real positive- and negative- permeabilities with $μ(-x)=-μ(x)$. By introducing parametrization into APT symmetric transfer matrix, together with reciprocity theorem, we propose… ▽ More We consider a type of hypothetical compound materials in which its refractive index in spatial distribution meet $n(-x)=-n^{*}(x)$, belonging to anti-parity-time (APT) symmetric structures. Additionally, we demand balanced real positive- and negative- permeabilities with $μ(-x)=-μ(x)$. By introducing parametrization into APT symmetric transfer matrix, together with reciprocity theorem, we propose a generic parametric space to display its associated scattering results including symmetry phase, exceptional point, and symmetry broken phase. The outcome is irrespective of any system complexity, geometries, materials, and operating frequency. With the parametric space, we find that APT symmetric system not only enables coherent perfect absorption or lasing occurred at an exceptional point, but also realize a simultaneous coherent perfect absorption-lasing. Since APT-symmetric system is constructed by balanced positive and negative index materials, the phase accumulated from optical path length is null, resulting in an assignment of mode order lost. To verify our analysis, several designed heterostructures are demonstrated to support our findings. △ Less

Submitted 24 April, 2025; originally announced April 2025.

TorbeamNN: Machine learning based steering of ECH mirrors on KSTAR

Authors: Andrew Rothstein, Minseok Kim, Minho Woo, Minsoo Cha, Cheolsik Byun, Sangkyeun Kim, Keith Erickson, Youngho Lee, Josh Josephy-Zack, Jalal Butt, Ricardo Shousha, Mi Joung, June-Woo Juhn, Kyu-Dong Lee, Egemen Kolemen

Abstract: We have developed TorbeamNN: a machine learning surrogate model for the TORBEAM ray tracing code to predict electron cyclotron heating and current drive locations in tokamak plasmas. TorbeamNN provides more than a 100 times speed-up compared to the highly optimized and simplified real-time implementation of TORBEAM without any reduction in accuracy compared to the offline, full fidelity TORBEAM co… ▽ More We have developed TorbeamNN: a machine learning surrogate model for the TORBEAM ray tracing code to predict electron cyclotron heating and current drive locations in tokamak plasmas. TorbeamNN provides more than a 100 times speed-up compared to the highly optimized and simplified real-time implementation of TORBEAM without any reduction in accuracy compared to the offline, full fidelity TORBEAM code. The model was trained using KSTAR electron cyclotron heating (ECH) mirror geometries and works for both O-mode and X-mode absorption. The TorbeamNN predictions have been validated both offline and real-time in experiment. TorbeamNN has been utilized to track an ECH absorption vertical position target in dynamic KSTAR plasmas as well as under varying toroidal mirror angles and with a minimal average tracking error of 0.5cm. △ Less

Submitted 15 April, 2025; originally announced April 2025.

Comments: 7 pages, 5 figures

CMS RPC Non-Physics Event Data Automation Ideology

Authors: A. Dimitrov, M. Tytgat, K. Mota Amarilo, A. Samalan, K. Skovpen, G. A. Alves, E. Alves Coelho, F. Marujo da Silva, M. Barroso Ferreira Filho, E. M. Da Costa, D. De Jesus Damiao, S. Fonseca De Souza, R. Gomes De Souza, L. Mundim, H. Nogima, J. P. Pinheiro, A. Santoro, M. Thiel, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Shopova, G. Sultanov, L. Litov, B. Pavlov , et al. (79 additional authors not shown)

Abstract: This paper presents a streamlined framework for real-time processing and analysis of condition data from the CMS experiment Resistive Plate Chambers (RPC). Leveraging data streaming, it uncovers correlations between RPC performance metrics, like currents and rates, and LHC luminosity or environmental conditions. The Java-based framework automates data handling and predictive modeling, integrating… ▽ More This paper presents a streamlined framework for real-time processing and analysis of condition data from the CMS experiment Resistive Plate Chambers (RPC). Leveraging data streaming, it uncovers correlations between RPC performance metrics, like currents and rates, and LHC luminosity or environmental conditions. The Java-based framework automates data handling and predictive modeling, integrating extensive datasets into synchronized, query-optimized tables. By segmenting LHC operations and analyzing larger virtual detector objects, the automation enhances monitoring precision, accelerates visualization, and provides predictive insights, revolutionizing RPC performance evaluation and future behavior modeling. △ Less

Submitted 11 April, 2025; originally announced April 2025.

Comments: CMS RPC Condition Data Automation, Java framework, 12 pages, 23 figures, CMS Condition database

The 2D Materials Roadmap

Authors: Wencai Ren, Peter Bøggild, Joan Redwing, Kostya Novoselov, Luzhao Sun, Yue Qi, Kaicheng Jia, Zhongfan Liu, Oliver Burton, Jack Alexander-Webber, Stephan Hofmann, Yang Cao, Yu Long, Quan-Hong Yang, Dan Li, Soo Ho Choi, Ki Kang Kim, Young Hee Lee, Mian Li, Qing Huang, Yury Gogotsi, Nicholas Clark, Amy Carl, Roman Gorbachev, Thomas Olsen , et al. (48 additional authors not shown)

Abstract: Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and developme… ▽ More Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and development, spanning synthesis, properties and commercial applications. We specifically present roadmaps for high impact 2D materials, including graphene and its derivatives, transition metal dichalcogenides, MXenes as well as their heterostructures and moiré systems. The discussions are organized into thematic sections covering emerging research areas (e.g., twisted electronics, moiré nano-optoelectronics, polaritronics, quantum photonics, and neuromorphic computing), breakthrough applications in key technologies (e.g., 2D transistors, energy storage, electrocatalysis, filtration and separation, thermal management, flexible electronics, sensing, electromagnetic interference shielding, and composites) and other important topics (computational discovery of novel materials, commercialization and standardization). This roadmap focuses on the current research landscape, future challenges and scientific and technological advances required to address, with the intent to provide useful references for promoting the development of 2D materials. △ Less

Submitted 28 April, 2025; v1 submitted 28 March, 2025; originally announced March 2025.

Comments: 97 pages, to be published in 2D Materials

Physics-Guided Multi-Fidelity DeepONet for Data-Efficient Flow Field Prediction

Authors: Sunwoong Yang, Youngkyu Lee, Namwoo Kang

Abstract: This study presents an enhanced multi-fidelity deep operator network (DeepONet) framework for efficient spatio-temporal flow field prediction, with particular emphasis on practical scenarios where high-fidelity data is scarce. We introduce several key innovations to improve the framework's efficiency and accuracy. First, we enhance the DeepONet architecture by incorporating a merge network that en… ▽ More This study presents an enhanced multi-fidelity deep operator network (DeepONet) framework for efficient spatio-temporal flow field prediction, with particular emphasis on practical scenarios where high-fidelity data is scarce. We introduce several key innovations to improve the framework's efficiency and accuracy. First, we enhance the DeepONet architecture by incorporating a merge network that enables more complex feature interactions between operator and coordinate spaces, achieving a 50.4% reduction in prediction error compared to traditional dot-product operations. We further optimize the architecture through temporal positional encoding and point-based sampling strategies, achieving a 7.57% improvement in prediction accuracy while reducing training time by 96% through efficient sampling and automatic mixed precision training. Building upon this foundation, we develop a transfer learning-based multi-fidelity framework that leverages knowledge from pre-trained low-fidelity models to guide high-fidelity predictions. Our approach freezes the pre-trained branch and trunk networks while making only the merge network trainable during high-fidelity training, preserving valuable low-fidelity representations while efficiently adapting to high-fidelity features. Through systematic investigation, we demonstrate that this fine-tuning strategy not only significantly outperforms linear probing and full-tuning alternatives but also surpasses conventional multi-fidelity frameworks by up to 76%, while achieving up to 43.7% improvement in prediction accuracy compared to single-fidelity training. The core contribution lies in our novel time-derivative guided sampling approach: it maintains prediction accuracy equivalent to models trained with the full dataset while requiring only 60% of the original high-fidelity samples. △ Less

Submitted 23 March, 2025; originally announced March 2025.

Microscopic mechanisms of flexoelectricity in oxide membranes

Authors: Harikrishnan KP, Varun Harbola, Jaehong Choi, Kevin J. Crust, Yu-Tsun Shao, Chia-Hao Lee, Dasol Yoon, Yonghun Lee, Gregory D. Fuchs, Cyrus E. Dreyer, Harold Y. Hwang, David A. Muller

Abstract: Modern electromechanical actuators and sensors rely on the piezoelectric effect that linearly couples strain and electric polarization. However, this effect is restricted to materials that lack inversion symmetry. In contrast, the flexoelectric effect couples strain gradients to electric polarization, and is a universal property in insulating materials of arbitrary symmetry. Flexoelectricity becom… ▽ More Modern electromechanical actuators and sensors rely on the piezoelectric effect that linearly couples strain and electric polarization. However, this effect is restricted to materials that lack inversion symmetry. In contrast, the flexoelectric effect couples strain gradients to electric polarization, and is a universal property in insulating materials of arbitrary symmetry. Flexoelectricity becomes prominent at the nanoscale from the inverse scaling of strain gradients with material dimensions. Here, we measure the strain-gradient-induced structural distortions in strontium titanate using multislice electron ptychography. This technique enables reliable picometer-scale measurements of the dominant oxygen-titanium distortions, correcting for artifacts that limited conventional imaging methods. This enables us to directly measure the sign of the net ionic contribution to the flexoelectric polarization. Guided by the experimental measurements, first-principles calculations show how the sign and magnitude of the bulk contribution to the flexoelectric coefficient in strontium titanate can be switched by tuning the strain state. Hybridization between the optical soft phonon and acoustic phonon modes drives this transition, yielding a large response and a polarity switch across the resonance. This strain-dependence might explain the sign discrepancy and orders of magnitude variation in the values of previously reported flexoelectric coefficients for strontium titanate. As the strain state of curved membranes can be tuned, our approach also suggests an approach to engineer nanoscale flexoelectric polarization using strain as a control parameter. △ Less

Submitted 17 March, 2025; originally announced March 2025.

Comments: 51 pages, 4 figures, 13 Supplementary Figures

Enabling Highly Efficient Infrared Silicon Photodetectors via Disordered Metasurfaces with Upconversion Nanoparticles

Authors: Wei Chen, Shutao Zhang, Chongwu Wang, Yiming Wu, Xiaodong Shi, Jiaqing Shen, Yan Liu, Xuran Zhang, Febiana Tjiptoharsono, Henry Yit Loong Lee, Di Zhu, Qijie Wang, Joel K. W. Yang, Jinfeng Zhu, Zhaogang Dong

Abstract: Silicon photodetectors are highly desirable for their CMOS compatibility, low cost, and fast response speed. However, their application the infrared (IR) is limited by silicon's intrinsic bandgap, which restricts its detection to photons with wavelengths shorter than 1100 nm. Although several methods have been developed to extend silicon photodetectors further in the IR range, these approaches oft… ▽ More Silicon photodetectors are highly desirable for their CMOS compatibility, low cost, and fast response speed. However, their application the infrared (IR) is limited by silicon's intrinsic bandgap, which restricts its detection to photons with wavelengths shorter than 1100 nm. Although several methods have been developed to extend silicon photodetectors further in the IR range, these approaches often introduce additional challenges, such as increased fabrication complexity and compatibility issues with standard CMOS processes. Here, we present an approach to overcome these limitations by integrating disordered metasurfaces with upconversion nanoparticles (UCNPs), enabling IR detection by silicon photodetectors. The disordered design consists of hybrid Mie-plasmonic cavities, which can enhance both the near-field localization and wide-band light absorption from visible to IR, improving photocurrent conversion. Compared to ordered structures, the infrared absorption and near field of the highly disordered configuration are increased by 2.6-folds and 3.9-folds, respectively. UCNPs not only convert near-infrared photons into visible light but also enhance absorption in the mid-infrared range, thereby improving hot electron generation. The measured responsivity of the disordered element for 1550 nm laser is up to 0.22 A/W at room temperature, corresponding to an external quantum efficiency of 17.6%. Our design not only enhances the photocurrent performance significantly, but also extends the working wavelength of silicon photodetectors to IR wavelength, making them suitable for broad spectrum applications. △ Less

Submitted 16 March, 2025; originally announced March 2025.

Probing the hollowing transition of a shell-shaped BEC with collective excitation

Authors: Zerong Huang, Kai Yuen Lee, Chun Kit Wong, Liyuan Qiu, Bo Yang, Yangqian Yan, Dajun Wang

Abstract: We investigate the hollowing transition of a shell-shaped Bose-Einstein condensate using collective excitations. The shell is created using an immiscible dual-species BEC mixture, with its hollowness controlled by tuning the repulsive interspecies interaction via a Feshbach resonance. Our results reveal two distinct monopole modes in which the two condensates oscillate either in-phase or out-of-ph… ▽ More We investigate the hollowing transition of a shell-shaped Bose-Einstein condensate using collective excitations. The shell is created using an immiscible dual-species BEC mixture, with its hollowness controlled by tuning the repulsive interspecies interaction via a Feshbach resonance. Our results reveal two distinct monopole modes in which the two condensates oscillate either in-phase or out-of-phase. The spectrum of the out-of-phase mode exhibits a non-monotonic dependence on the interspecies interaction, providing a clear signature of the topology change from a filled to a hollow condensate. Furthermore, we find that the critical point of the hollowing transition depends strongly on the number ratio of the two species. Our findings provide a detailed understanding of the topology change in shell-shaped quantum gases and pave the way for future study of quantum many-body phenomena in curved spaces. △ Less

Submitted 15 March, 2025; originally announced March 2025.

Classification of Fragile Topology Enabled by Matrix Homotopy

Authors: Ki Young Lee, Stephan Wong, Sachin Vaidya, Terry A. Loring, Alexander Cerjan

Abstract: The moire flat bands in twisted bilayer graphene have attracted considerable attention not only because of the emergence of correlated phases but also due to their nontrivial topology. Specifically, they exhibit a new class of topology that can be nullified by the addition of trivial bands, termed fragile topology, which suggests the need for an expansion of existing classification schemes. Here,… ▽ More The moire flat bands in twisted bilayer graphene have attracted considerable attention not only because of the emergence of correlated phases but also due to their nontrivial topology. Specifically, they exhibit a new class of topology that can be nullified by the addition of trivial bands, termed fragile topology, which suggests the need for an expansion of existing classification schemes. Here, we develop a Z2 energy-resolved topological marker for classifying fragile phases using a system's position-space description, enabling the direct classification of finite, disordered, and aperiodic materials. By translating the physical symmetries protecting the system's fragile topological phase into matrix symmetries of the system's Hamiltonian and position operators, we use matrix homotopy to construct our topological marker while simultaneously yielding a quantitative measure of topological robustness. We show our framework's effectiveness using a C2T-symmetric twisted bilayer graphene model and photonic crystal as a continuum example. We have found that fragile topology can persist both under strong disorder and in heterostructures lacking a bulk spectral gap, and even an example of disorder-induced re-entrant topology. Overall, the proposed scheme serves as an effective tool for elucidating aspects of fragile topology, offering guidance for potential applications across a variety of experimental platforms from topological photonics to correlated phases in materials. △ Less

Submitted 5 March, 2025; originally announced March 2025.

Comments: 18 pages, 11 figures

Current-driven collective control of helical spin texture in van der Waals antiferromagnet

Authors: Kai-Xuan Zhang, Suik Cheon, Hyuncheol Kim, Pyeongjae Park, Yeochan An, Suhan Son, Jingyuan Cui, Jihoon Keum, Joonyoung Choi, Younjung Jo, Hwiin Ju, Jong-Seok Lee, Youjin Lee, Maxim Avdeev, Armin Kleibert, Hyun-Woo Lee, Je-Geun Park

Abstract: Electrical control of quantum magnetic states is essential in spintronic science. Initial studies on the ferromagnetic state control were extended to collinear antiferromagnets and, more recently, noncollinear antiferromagnets. However, electrical control mechanisms of such exotic magnetic states remain poorly understood. Here, we report the first experimental and theoretical example of the curren… ▽ More Electrical control of quantum magnetic states is essential in spintronic science. Initial studies on the ferromagnetic state control were extended to collinear antiferromagnets and, more recently, noncollinear antiferromagnets. However, electrical control mechanisms of such exotic magnetic states remain poorly understood. Here, we report the first experimental and theoretical example of the current control of helical antiferromagnets, arising from the competition between collinear antiferromagnetic exchange and interlayer Dzyaloshinskii-Moriya interaction in new van-der-Waals (vdW) material Ni1/3NbS2. Due to the intrinsic broken inversion symmetry, an in-plane current generates spin-orbit torque that, in turn, interacts directly with the helical antiferromagnetic order. Our theoretical analyses indicate that a weak ferromagnetic order coexists due to the Dzyaloshinskii-Moriya interaction, mediating the spin-orbit torque to collectively rotate the helical antiferromagnetic order. Our Ni1/3NbS2 nanodevice experiments produce current-dependent resistance change consistent with the theoretical prediction. This work widens our understanding of the electrical control of helical antiferromagnets and promotes vdW quantum magnets as interesting material platforms for electrical control. △ Less

Submitted 28 February, 2025; originally announced March 2025.

Comments: Accepted by Physical Review Letters; 41 pages, 4 main figures, 12 supporting figures

Journal ref: Physical Review Letters XX, XXXX (2025)

Roadmap for Molecular Benchmarks in Nonadiabatic Dynamics

Authors: Léon E. Cigrang, Basile F. E. Curchod, Rebecca A. Ingle, Aaron Kelly, Jonathan R. Mannouch, Davide Accomasso, Alexander Alijah, Mario Barbatti, Wiem Chebbi, Nađa Došlić, Elliot C. Eklund, Sebastian Fernandez-Alberti, Antonia Freibert, Leticia González, Giovanni Granucci, Federico J. Hernández, Javier Hernández-Rodríguez, Amber Jain, Jiří Janoš, Ivan Kassal, Adam Kirrander, Zhenggang Lan, Henrik R. Larsson, David Lauvergnat, Brieuc Le Dé , et al. (20 additional authors not shown)

Abstract: Simulating the coupled electronic and nuclear response of a molecule to light excitation requires the application of nonadiabatic molecular dynamics. However, when faced with a specific photophysical or photochemical problem, selecting the most suitable theoretical approach from the wide array of available techniques is not a trivial task. The challenge is further complicated by the lack of system… ▽ More Simulating the coupled electronic and nuclear response of a molecule to light excitation requires the application of nonadiabatic molecular dynamics. However, when faced with a specific photophysical or photochemical problem, selecting the most suitable theoretical approach from the wide array of available techniques is not a trivial task. The challenge is further complicated by the lack of systematic method comparisons and rigorous testing on realistic molecular systems. This absence of comprehensive molecular benchmarks remains a major obstacle to advances within the field of nonadiabatic molecular dynamics. A CECAM workshop, Standardizing Nonadiabatic Dynamics: Towards Common Benchmarks, was held in May 2024 to address this issue. This Perspective highlights the key challenges identified during the workshop in defining molecular benchmarks for nonadiabatic dynamics. Specifically, this work outlines some preliminary observations on essential components needed for simulations and proposes a roadmap aiming to establish, as an ultimate goal, a community-driven, standardized molecular benchmark set. △ Less

Submitted 4 July, 2025; v1 submitted 20 February, 2025; originally announced February 2025.

Comments: Third version after acceptance by JPCA

High-field Breakdown and Thermal Characterization of Indium Tin Oxide Transistors

Authors: Haotian Su, Yuan-Mau Lee, Tara Peña, Sydney Fultz-Waters, Jimin Kang, Çağıl Köroğlu, Sumaiya Wahid, Christina J. Newcomb, Young Suh Song, H. -S. Philip Wong, Shan X. Wang, Eric Pop

Abstract: Amorphous oxide semiconductors are gaining interest for logic and memory transistors compatible with low-temperature fabrication. However, their low thermal conductivity and heterogeneous interfaces suggest that their performance may be severely limited by self-heating, especially at higher power and device densities. Here, we investigate the high-field breakdown of ultrathin (~4 nm) amorphous ind… ▽ More Amorphous oxide semiconductors are gaining interest for logic and memory transistors compatible with low-temperature fabrication. However, their low thermal conductivity and heterogeneous interfaces suggest that their performance may be severely limited by self-heating, especially at higher power and device densities. Here, we investigate the high-field breakdown of ultrathin (~4 nm) amorphous indium tin oxide (ITO) transistors with scanning thermal microscopy (SThM) and multiphysics simulations. The ITO devices break irreversibly at channel temperatures of ~180 °C and ~340 °C on SiO${_2}$ and HfO${_2}$ substrates, respectively, with failure primarily caused by thermally-induced compressive strain near the device contacts. Combining SThM measurements with simulations allows us to estimate a thermal boundary conductance (TBC) of 35 ${\pm}$ 12 MWm${^-}$${^2}$K${^-}$${^1}$ for ITO on SiO${_2}$, and 51 ${\pm}$ 14 MWm${^-}$${^2}$K${^-}$${^1}$ for ITO on HfO${_2}$. The latter also enables significantly higher breakdown power due to better heat dissipation and closer thermal expansion matching. These findings provide insights into the thermo-mechanical limitations of indium-based amorphous oxide transistors, which are important for more reliable and high-performance logic and memory applications. △ Less

Submitted 22 April, 2025; v1 submitted 28 January, 2025; originally announced January 2025.

Journal ref: ACS Nano (2025)

X-ray microcomputed tomography of 3D chaotic microcavities

Authors: Ke Tian, Mohammed Zia Jalaludeen, Yeon Ui Lee, Shilong Li, Sile Nic Chormaic

Abstract: Chaotic microcavities play a crucial role in several research areas, including the study of unidirectional microlasers, nonlinear optics, sensing, quantum chaos, and non-Hermitian physics. To date, most theoretical and experimental explorations have focused on two-dimensional (2D) chaotic dielectric microcavities, while there have been minimal studies on three-dimensional (3D) ones since precise g… ▽ More Chaotic microcavities play a crucial role in several research areas, including the study of unidirectional microlasers, nonlinear optics, sensing, quantum chaos, and non-Hermitian physics. To date, most theoretical and experimental explorations have focused on two-dimensional (2D) chaotic dielectric microcavities, while there have been minimal studies on three-dimensional (3D) ones since precise geometrical information of a 3D microcavity can be difficult to obtain. Here, we image 3D microcavities with submicron resolution using X-ray microcomputed tomography (micro CT), enabling nondestructive imaging that preserves the sample for subsequent use. By analyzing the ray dynamics of a typical deformed microsphere, we demonstrate that a sufficient deformation along all three dimensions can lead to chaotic ray trajectories over extended time scales. Notably, using the X-ray micro CT reconstruction results, the phase space chaotic ray dynamics of a deformed microsphere are accurately established. X-ray micro CT could become a unique platform for the characterization of such deformed 3D microcavities by providing a precise means for determining the degree of deformation necessary for potential applications in ray chaos and quantum chaos. △ Less

Submitted 10 January, 2025; originally announced January 2025.

Intelligent experiments through real-time AI: Fast Data Processing and Autonomous Detector Control for sPHENIX and future EIC detectors

Authors: J. Kvapil, G. Borca-Tasciuc, H. Bossi, K. Chen, Y. Chen, Y. Corrales Morales, H. Da Costa, C. Da Silva, C. Dean, J. Durham, S. Fu, C. Hao, P. Harris, O. Hen, H. Jheng, Y. Lee, P. Li, X. Li, Y. Lin, M. X. Liu, V. Loncar, J. P. Mitrevski, A. Olvera, M. L. Purschke, J. S. Renck , et al. (8 additional authors not shown)

Abstract: This R\&D project, initiated by the DOE Nuclear Physics AI-Machine Learning initiative in 2022, leverages AI to address data processing challenges in high-energy nuclear experiments (RHIC, LHC, and future EIC). Our focus is on developing a demonstrator for real-time processing of high-rate data streams from sPHENIX experiment tracking detectors. The limitations of a 15 kHz maximum trigger rate imp… ▽ More This R\&D project, initiated by the DOE Nuclear Physics AI-Machine Learning initiative in 2022, leverages AI to address data processing challenges in high-energy nuclear experiments (RHIC, LHC, and future EIC). Our focus is on developing a demonstrator for real-time processing of high-rate data streams from sPHENIX experiment tracking detectors. The limitations of a 15 kHz maximum trigger rate imposed by the calorimeters can be negated by intelligent use of streaming technology in the tracking system. The approach efficiently identifies low momentum rare heavy flavor events in high-rate p+p collisions (3MHz), using Graph Neural Network (GNN) and High Level Synthesis for Machine Learning (hls4ml). Success at sPHENIX promises immediate benefits, minimizing resources and accelerating the heavy-flavor measurements. The approach is transferable to other fields. For the EIC, we develop a DIS-electron tagger using Artificial Intelligence - Machine Learning (AI-ML) algorithms for real-time identification, showcasing the transformative potential of AI and FPGA technologies in high-energy nuclear and particle experiments real-time data processing pipelines. △ Less

Submitted 8 January, 2025; originally announced January 2025.

Comments: proceedings for 42nd International Conference on High Energy Physics (ICHEP2024), 18-24 July 2024, Prague, Czech Republic

Report number: LA-UR-24-30394

Femtosecond temperature measurements of laser-shocked copper deduced from the intensity of the x-ray thermal diffuse scattering

Authors: J. S. Wark, D. J. Peake, T. Stevens, P. G. Heighway, Y. Ping, P. Sterne, B. Albertazzi, S. J. Ali, L. Antonelli, M. R. Armstrong, C. Baehtz, O. B. Ball, S. Banerjee, A. B. Belonoshko, C. A. Bolme, V. Bouffetier, R. Briggs, K. Buakor, T. Butcher, S. Di Dio Cafiso, V. Cerantola, J. Chantel, A. Di Cicco, A. L. Coleman, J. Collier , et al. (100 additional authors not shown)

Abstract: We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser-ablation up to pressures above 135~GPa. We hence deduce the x-ray Debye-Waller (DW) factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density (HED) endstation of the European X… ▽ More We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser-ablation up to pressures above 135~GPa. We hence deduce the x-ray Debye-Waller (DW) factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density (HED) endstation of the European X-ray Free-Electron Laser (EuXFEL). Single x-ray pulses, with a photon energy of 18 keV, were scattered from the samples and recorded on Varex detectors. Despite the targets being highly textured (as evinced by large variations in the elastic scattering), and with such texture changing upon compression, the absolute intensity of the azimuthally averaged inelastic TDS between the Bragg peaks is largely insensitive to these changes, and, allowing for both Compton scattering and the low-level scattering from a sacrificial ablator layer, provides a reliable measurement of $T/Θ_D^2$, where $Θ_D$ is the Debye temperature. We compare our results with the predictions of the SESAME 3336 and LEOS 290 equations of state for copper, and find good agreement within experimental errors. We thus demonstrate that single-shot temperature measurements of dynamically compressed materials can be made via thermal diffuse scattering of XFEL radation. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Comments: 17 pages, 9 figures in main article; 10 pages, 5 figures in supplementary material

Magnetoelectric effect in van der Waals magnets

Authors: Kai-Xuan Zhang, Giung Park, Youjin Lee, Beom Hyun Kim, Je-Geun Park

Abstract: The magnetoelectric (ME) effect is a fundamental concept in modern condensed matter physics and represents the electrical control of magnetic polarisations or vice versa. Two-dimensional (2D) van-der-Waals (vdW) magnets have emerged as a new class of materials and exhibit novel ME effects with diverse manifestations. This review emphasizes some important recent discoveries unique to vdW magnets: m… ▽ More The magnetoelectric (ME) effect is a fundamental concept in modern condensed matter physics and represents the electrical control of magnetic polarisations or vice versa. Two-dimensional (2D) van-der-Waals (vdW) magnets have emerged as a new class of materials and exhibit novel ME effects with diverse manifestations. This review emphasizes some important recent discoveries unique to vdW magnets: multiferroicity on two dimensions, spin-charge correlation, atomic ME effect and current-induced intrinsic spin-orbit torque, and electrical gating control and magnetic control of their electronic properties. We also highlight the promising route of utilizing quantum magnetic hetero- or homo-structures to engineer the ME effect and corresponding spintronic and optoelectronic device applications. Due to the intrinsic two-dimensionality, vdW magnets with those ME effects are expected to form a new, exciting research direction. △ Less

Submitted 7 January, 2025; v1 submitted 3 January, 2025; originally announced January 2025.

Comments: Accepted by npj Quantum Materials; 27 pages, 6 main figures

Journal ref: npj Quantum Materials 10, 6 (2025)

Advances in imaging techniques for the study of individual bacteria and their pathophysiology

Authors: Dohyeon Lee, Hyun-Seung Lee, Moosung Lee, Minhee Kang, Geon Kim, Tae Yeul Kim, Nam Yong Lee, YongKeun Park

Abstract: Bacterial heterogeneity is pivotal for adaptation to diverse environments, posing significant challenges in microbial diagnostics and therapeutic interventions. Recent advancements in high-resolution optical microscopy have revolutionized our ability to observe and characterize individual bacteria, offering unprecedented insights into their metabolic states and behaviors at the single-cell level.… ▽ More Bacterial heterogeneity is pivotal for adaptation to diverse environments, posing significant challenges in microbial diagnostics and therapeutic interventions. Recent advancements in high-resolution optical microscopy have revolutionized our ability to observe and characterize individual bacteria, offering unprecedented insights into their metabolic states and behaviors at the single-cell level. This review discusses the transformative impact of various high-resolution imaging techniques, including fluorescence and label-free imaging, which have enhanced our understanding of bacterial pathophysiology. These methods provide detailed visualizations that are crucial for developing targeted treatments and improving clinical diagnostics. We highlight the integration of these imaging techniques with computational tools, which has facilitated rapid, accurate pathogen identification and real-time monitoring of bacterial responses to treatments. The ongoing development of these optical imaging technologies promises to significantly advance our understanding of microbiology and to catalyze the translation of these insights into practical healthcare solutions. △ Less

Submitted 2 January, 2025; originally announced January 2025.

Coherent control of solid-state defect spins via patterned boron-doped diamond circuit

Authors: Masahiro Ohkuma, Eikichi Kimura, Ryo Matsumoto, Shumpei Ohyama, Saki Tsuchiya, Harim Lim, Yong Soo Lee, Junghyun Lee, Yoshihiko Takano, Keigo Arai

Abstract: We investigate the electrical transport characteristics of boron-doped diamond (BDD) across frequencies ranging from direct current to 3 GHz to explore the potential of BDD circuits as microwave waveguides. Three homoepitaxial BDD films with varying boron concentrations, exhibiting insulating to metallic properties, are fabricated on a single-crystalline diamond substrate containing nitrogen-vacan… ▽ More We investigate the electrical transport characteristics of boron-doped diamond (BDD) across frequencies ranging from direct current to 3 GHz to explore the potential of BDD circuits as microwave waveguides. Three homoepitaxial BDD films with varying boron concentrations, exhibiting insulating to metallic properties, are fabricated on a single-crystalline diamond substrate containing nitrogen-vacancy (NV) centers. The $Ω$-shaped BDD circuit demonstrates an approximately 30 $Ω$ impedance at the resonance frequency of the NV center, facilitating the propagation of microwaves over the circuit, even with a standard 50 $Ω$ reference impedance. We successfully perform optically detected magnetic resonance (ODMR) on NV centers within diamonds using BDD circuits and observed continuous-wave ODMR spectra across all circuits. Additionally, we record Rabi oscillations in pulsed ODMR measurements using the metallic BDD circuit. The integration of NV centers with BDDs presents a compact, robust, and adaptable platform for quantum sensing in challenging environments and for quantum information processing. △ Less

Submitted 20 December, 2024; originally announced December 2024.

Inorganic electrochromic metasurface in the visible

Authors: Yohan Lee, Jonas Herbig, Serkan Arslan, Dominik Ludescher, Monika Ubl, Andreas Georg, Mario Hentschel, Harald Giessen

Abstract: Colour printing based on metallic or dielectric nanostructures has revolutionized colour science due to its unprecedented subwavelength resolution. Evidently, the evolution towards the active control of such structural colours with smart materials is in progress for real applications. Here we experimentally demonstrate a large colour gamut with high intensity and purity, as well as its switching o… ▽ More Colour printing based on metallic or dielectric nanostructures has revolutionized colour science due to its unprecedented subwavelength resolution. Evidently, the evolution towards the active control of such structural colours with smart materials is in progress for real applications. Here we experimentally demonstrate a large colour gamut with high intensity and purity, as well as its switching on and off based solely on tungsten trioxide (WO3) cylindrical resonators. The strong resonances in the visible spectral range in these WO3 metasurfaces can be reversibly switched on and off due to its electrochromism by applying alternating voltages of +2.0 V and -0.3 V. Our approach opens up possibilities for the functional diversification of commercial smart windows, as well as the development of new display technologies in the future. △ Less

Submitted 3 March, 2025; v1 submitted 16 December, 2024; originally announced December 2024.

Deep learning-enhanced chemiluminescence vertical flow assay for high-sensitivity cardiac troponin I testing

Authors: Gyeo-Re Han, Artem Goncharov, Merve Eryilmaz, Shun Ye, Hyou-Arm Joung, Rajesh Ghosh, Emily Ngo, Aoi Tomoeda, Yena Lee, Kevin Ngo, Elizabeth Melton, Omai B. Garner, Dino Di Carlo, Aydogan Ozcan

Abstract: Democratizing biomarker testing at the point-of-care requires innovations that match laboratory-grade sensitivity and precision in an accessible format. Here, we demonstrate high-sensitivity detection of cardiac troponin I (cTnI) through innovations in chemiluminescence-based sensing, imaging, and deep learning-driven analysis. This chemiluminescence vertical flow assay (CL-VFA) enables rapid, low… ▽ More Democratizing biomarker testing at the point-of-care requires innovations that match laboratory-grade sensitivity and precision in an accessible format. Here, we demonstrate high-sensitivity detection of cardiac troponin I (cTnI) through innovations in chemiluminescence-based sensing, imaging, and deep learning-driven analysis. This chemiluminescence vertical flow assay (CL-VFA) enables rapid, low-cost, and precise quantification of cTnI, a key cardiac protein for assessing heart muscle damage and myocardial infarction. The CL-VFA integrates a user-friendly chemiluminescent paper-based sensor, a polymerized enzyme-based conjugate, a portable high-performance CL reader, and a neural network-based cTnI concentration inference algorithm. The CL-VFA measures cTnI over a broad dynamic range covering six orders of magnitude and operates with 50 uL of serum per test, delivering results in 25 min. This system achieves a detection limit of 0.16 pg/mL with an average coefficient of variation under 15%, surpassing traditional benchtop analyzers in sensitivity by an order of magnitude. In blinded validation, the computational CL-VFA accurately measured cTnI concentrations in patient samples, demonstrating a robust correlation against a clinical-grade FDA-cleared analyzer. These results highlight the potential of CL-VFA as a robust diagnostic tool for accessible, rapid cardiac biomarker testing that meets the needs of diverse healthcare settings, from emergency care to underserved regions. △ Less

Submitted 12 December, 2024; originally announced December 2024.

Comments: 24 Pages, 4 Figures

Journal ref: Small (2025)

Machine-Learning-Accelerated Surface Exploration of Reconstructed BiVO$_{4}$(010) and Characterization of Their Aqueous Interfaces

Authors: Yonghyuk Lee, Taehun Lee

Abstract: Understanding the semiconductor-electrolyte interface in photoelectrochemical (PEC) systems is crucial for optimizing stability and reactivity. Despite the challenges in establishing reliable surface structure models during PEC cycles, this study explores the complex surface reconstructions of BiVO$_{4}$(010) by employing a computational workflow integrated with a state-of-the-art active learning… ▽ More Understanding the semiconductor-electrolyte interface in photoelectrochemical (PEC) systems is crucial for optimizing stability and reactivity. Despite the challenges in establishing reliable surface structure models during PEC cycles, this study explores the complex surface reconstructions of BiVO$_{4}$(010) by employing a computational workflow integrated with a state-of-the-art active learning protocol for a machine-learning interatomic potential and global optimization techniques. Within this workflow, we identified 494 unique reconstructed surface structures that surpass conventional chemical intuition-driven, bulk-truncated models. After constructing the surface Pourbaix diagram under Bi- and V-rich electrolyte conditions using density functional theory and hybrid functional calculations, we proposed structural models for the experimentally observed Bi-rich BiVO$_{4}$ surfaces. By performing hybrid functional molecular dynamics simulations with explicit treatment of water molecules on selected reconstructed BiVO$_{4}$(010) surfaces, we observed spontaneous water dissociation, marking the first theoretical report of this phenomenon. Our findings demonstrate significant water dissociation on reconstructed Bi-rich surfaces, highlighting the critical role of bare and under-coordinated Bi sites (only observable in reconstructed surfaces) in driving hydration processes. Our work establishes a foundation for understanding the role of complex, reconstructed Bi surfaces in surface hydration and reactivity. Additionally, our theoretical framework for exploring surface structures and predicting reactivity in multicomponent oxides offers a precise approach to describing complex surface and interface processes in PEC systems. △ Less

Submitted 11 December, 2024; originally announced December 2024.

Development of decay energy spectroscopy for radio impurity analysis

Authors: J. S. Chung, O. Gileva, C. Ha, J. A Jeon, H. B. Kim, H. L. Kim, Y. H. Kim, H. J. Kim, M. B Kim, D. H. Kwon, D. S. Leonard, D. Y. Lee, Y. C. Lee, H. S. Lim, K. R. Woo, J. Y. Yang

Abstract: We present the development of a decay energy spectroscopy (DES) method for the analysis of radioactive impurities using magnetic microcalorimeters (MMCs). The DES system was designed to analyze radionuclides, such as Ra-226, Th-228, and their daughter nuclides, in materials like copper, commonly used in rare-event search experiments. We tested the DES system with a gold foil absorber measuring 20x… ▽ More We present the development of a decay energy spectroscopy (DES) method for the analysis of radioactive impurities using magnetic microcalorimeters (MMCs). The DES system was designed to analyze radionuclides, such as Ra-226, Th-228, and their daughter nuclides, in materials like copper, commonly used in rare-event search experiments. We tested the DES system with a gold foil absorber measuring 20x20x0.05 mm^3, large enough to accommodate a significant drop of source solution. Using this large absorber and an MMC sensor, we conducted a long-term measurement over ten days of live time, requiring 11 ADR cooling cycles. The combined spectrum achieved an energy resolution of 45 keV FWHM, sufficient to identify most alpha and DES peaks of interest. Specific decay events from radionuclide contaminants in the absorber were identified. This experiment confirms the capability of the DES system to measure alpha decay chains of Ra-226 and Th-228, offering a promising method for radio-impurity evaluation in ultra-low background experiments. △ Less

Submitted 4 December, 2024; originally announced December 2024.

Comments: 5 pages, 5 figures

Cascade hot carriers via broad-band resonant tunneling

Authors: Kamal Kumar Paul, Ashok Mondal, Jae Woo Kim, Ji-Hee Kim, Young Hee Lee

Abstract: Extraction of hot carriers (HCs) over the band-edge is a key to harvest solar energy beyond Shockley-Queisser limit1. Graphene is known as a HC-layered material due to phonon bottleneck effect near Dirac point, but limited by low photocarrier density2. Graphene/transition metal dichalcogenide (TMD) heterostructures circumvent this issue by ultrafast carrier transfer from TMD to graphene2,3. Nevert… ▽ More Extraction of hot carriers (HCs) over the band-edge is a key to harvest solar energy beyond Shockley-Queisser limit1. Graphene is known as a HC-layered material due to phonon bottleneck effect near Dirac point, but limited by low photocarrier density2. Graphene/transition metal dichalcogenide (TMD) heterostructures circumvent this issue by ultrafast carrier transfer from TMD to graphene2,3. Nevertheless, efficient extraction of photocurrent by means of HCs together with carrier multiplication (CM) is still missing. Here, we introduce an ultrathin broadband resonant tunneling (BRT) barrier, TiOX to efficiently extract photocurrent with simultaneous CM and HC measurements in MoS2/graphene/TiOX heterostructure. The BRT layer gives rise to boosting open circuit voltage which is linearly proportional to incident photon energy. Meanwhile, short circuit current rises rapidly over 2Eg with obvious CM feature. This was explained by defining the joint density of states between graphene and TiOX layer over positive and negative voltage. The broadband resonant tunneling states inherently constructed from oxidation states varying from Ti3+ to Ti4+ allow the ultrafast HCs to efficiently transfer from graphene to TiOX layer. We find that the number of available tunneling states is directly proportional to short circuit current, which is well corroborated with TiOX and MoS2 thickness variance. We obtained an optimum thickness of BRT layer of ~2.8 nm, yielding cascade open circuit voltage as high as ~0.7 V, two orders of magnitude higher than that without BRT layer to reach a record efficiency of 5.3% with improved fill factor owing to synergistic HC and CM conversion under 1-SUN with long-term stability. △ Less

Submitted 8 November, 2024; originally announced November 2024.

Polarization-independent metasurfaces based on bound states in the continuum with high Q-factor and resonance modulation

Authors: Xingye Yang, Alexander Antonov, Andreas Aigner, Thomas Weber, Yohan Lee, Tao Jiang, Haiyang Hu, Andreas Tittl

Abstract: Metasurfaces offer a powerful platform for effective light manipulation, which is crucial for advanced optical technologies. While designs of polarization-independent structures have reduced the need for polarized illumination, they are often limited by either low Q factors or low resonance modulation. Here, we design and experimentally demonstrate a metasurface with polarization-independent quasi… ▽ More Metasurfaces offer a powerful platform for effective light manipulation, which is crucial for advanced optical technologies. While designs of polarization-independent structures have reduced the need for polarized illumination, they are often limited by either low Q factors or low resonance modulation. Here, we design and experimentally demonstrate a metasurface with polarization-independent quasi-bound state in the continuum (quasi-BIC), where the unit cell consists of four silicon squares arranged in a two-dimensional array and the resonance properties can be controlled by adjusting the edge length difference between different squares. Our metasurface experimentally achieves a Q factor of approximately 100 and a resonance modulation of around 50%. This work addresses a common limitation in previous designs, which either achieved high Q factors exceeding 200 with a resonance modulation of less than 10%, leading to challenging signal-to-noise ratio requirements, or achieved strong resonance modulation with Q factors of only around 10, limiting light confinement and fine-tuning capabilities. In contrast, our metasurface ensures that the polarization-independent signal is sharp and distinct within the system, reducing the demands on signal-to-noise ratio and improving robustness. Experiments show the consistent performance across different polarization angles. This work contributes to the development of versatile optical devices, enhancing the potential for the practical application of BIC-based designs in areas such as optical filtering and sensing. △ Less

Submitted 8 November, 2024; originally announced November 2024.

Radiopurity measurements of liquid scintillator for the COSINE-100 Upgrade

Authors: J. Kim, C. Ha, S. H. Kim, W. K. Kim, Y. D. Kim, Y. J. Ko, E. K. Lee, H. Lee, H. S. Lee, I. S. Lee, J. Lee, S. H. Lee, S. M. Lee, Y. J. Lee, G. H. Yu

Abstract: A new 2,400 L liquid scintillator has been produced for the COSINE-100 Upgrade, which is under construction at Yemilab for the next COSINE dark matter experiment phase. The linear-alkyl-benzene-based scintillator is designed to serve as a veto for NaI(Tl) crystal targets and a separate platform for rare event searches. We measured using a sample consisting of a custom-made 445 mL cylindrical Teflo… ▽ More A new 2,400 L liquid scintillator has been produced for the COSINE-100 Upgrade, which is under construction at Yemilab for the next COSINE dark matter experiment phase. The linear-alkyl-benzene-based scintillator is designed to serve as a veto for NaI(Tl) crystal targets and a separate platform for rare event searches. We measured using a sample consisting of a custom-made 445 mL cylindrical Teflon container equipped with two 3-inch photomultiplier tubes. Analyses show activity levels of $0.091 \pm 0.042$ mBq/kg for $^{238}$U and $0.012 \pm 0.007$ mBq/kg for $^{232}$Th. △ Less

Submitted 30 June, 2025; v1 submitted 7 November, 2024; originally announced November 2024.

Journal ref: J. Instrum. 20 (2025) T06006

Routing Light Emission from Monolayer MoS$_2$ by Mie Resonances of Crystalline Silicon Nanospheres

Authors: Keisuke Ozawa, Hiroshi Sugimoto, Daisuke Shima, Tatsuki Hinamoto, Mojtaba Karimi Habil, Yan Joe Lee, Søren Raza, Keisuke Imaeda, Kosei Ueno, Mark L. Brongersma, Minoru Fujii

Abstract: A dielectric Mie-resonant nanoantenna is capable of controlling the directionality of the emission from nearby quantum emitters through the excitation of multiple degenerate Mie resonances. A crystalline silicon nanosphere (Si NS) is a promising candidate for a dielectric nanoantenna because crystalline Si has a large refractive index (3.8 at 650 nm) and the small imaginary part of a complex refra… ▽ More A dielectric Mie-resonant nanoantenna is capable of controlling the directionality of the emission from nearby quantum emitters through the excitation of multiple degenerate Mie resonances. A crystalline silicon nanosphere (Si NS) is a promising candidate for a dielectric nanoantenna because crystalline Si has a large refractive index (3.8 at 650 nm) and the small imaginary part of a complex refractive index (0.015 at 650 nm) as an optical material. In this work, we control the emission directionality of excitons supported by monolayer transition metal dichalcogenides (1L-TMDCs) using a Si NS. We first discuss the condition to extract the emission preferentially towards the Si NS side from the analytical calculations. We then study the photoluminescence (PL) of 1L-TMDCs on which differently sized single Si NSs are placed. We show that the PL spectral shape strongly depends on the emission direction, and that the emission toward the Si NS side (top) with respect to the opposite side (bottom) is the largest at wavelengths between the magnetic dipole and electric dipole Mie resonances of a Si NS. Finally, we quantitatively discuss the spectral shape of the top-to-bottom ratio from numerical simulations. △ Less

Submitted 28 October, 2024; originally announced October 2024.

Comments: 8 pages, 5 figures

Coherent and incoherent light scattering by single-atom wavepackets

Authors: Vitaly Fedoseev, Hanzhen Lin, Yu-Kun Lu, Yoo Kyung Lee, Jiahao Lyu, Wolfgang Ketterle

Abstract: We study light scattering of single atoms in free space and discuss the results in terms of atom-photon entanglement and which-way information. Using ultracold atoms released from an optical lattice, we realize a Gedanken experiment which interferes single photons scattering off of Heisenberg uncertainty-limited wavepackets. We unify the free-space and trapped-atom pictures by measuring the light… ▽ More We study light scattering of single atoms in free space and discuss the results in terms of atom-photon entanglement and which-way information. Using ultracold atoms released from an optical lattice, we realize a Gedanken experiment which interferes single photons scattering off of Heisenberg uncertainty-limited wavepackets. We unify the free-space and trapped-atom pictures by measuring the light scattered during wavepacket expansion and show the coherence properties of the scattered light is independent of the presence of the trap. Our experiment demonstrates the potential of using atomic Mott insulators to create single-atom wavepackets for fundamental studies. △ Less

Submitted 25 October, 2024; originally announced October 2024.

Exploring growing complex systems with higher-order interactions

Authors: Soo Min Oh, Yongsun Lee, Byungnam Kahng

Abstract: A complex system with many interacting individuals can be represented by a network consisting of nodes and links representing individuals and pairwise interactions, respectively. However, real-world systems grow with time and include many higher-order interactions. Such systems with higher-order interactions can be well described by a simplicial complex (SC), which is a type of hypergraph, consist… ▽ More A complex system with many interacting individuals can be represented by a network consisting of nodes and links representing individuals and pairwise interactions, respectively. However, real-world systems grow with time and include many higher-order interactions. Such systems with higher-order interactions can be well described by a simplicial complex (SC), which is a type of hypergraph, consisting of simplexes representing sets of multiple interacting nodes. Here, capturing the properties of growing real-world systems, we propose a growing random SC (GRSC) model where a node is added and a higher dimensional simplex is established among nodes at each time step. We then rigorously derive various percolation properties in the GRSC. Finally, we confirm that the system exhibits an infinite-order phase transition as higher-order interactions accelerate the growth of the system and result in the advanced emergence of a giant cluster. This work can pave the way for interpreting growing complex systems with higher-order interactions such as social, biological, brain, and technological systems. △ Less

Submitted 11 November, 2024; v1 submitted 8 October, 2024; originally announced October 2024.

Comments: 8 pages, 6 figures

Topological beaming of light: Proof-of-concept experiment

Authors: Yu Sung Choi, Ki Young Lee, Soo-Chan An, Minchul Jang, Youngjae Kim, Seung Han Shin, Jae Woong Yoon

Abstract: Beam shaping in nanophotonic systems remains a challenge due to the reliance on complex heuristic optimization procedures. In this work, we experimentally demonstrate a novel approach to topological beam shaping using Jackiw-Rebbi states in metasurfaces. By fabricating thin-film dielectric structures with engineered Dirac-mass distributions, we create domain walls that allow precise control over b… ▽ More Beam shaping in nanophotonic systems remains a challenge due to the reliance on complex heuristic optimization procedures. In this work, we experimentally demonstrate a novel approach to topological beam shaping using Jackiw-Rebbi states in metasurfaces. By fabricating thin-film dielectric structures with engineered Dirac-mass distributions, we create domain walls that allow precise control over beam profiles. We observe the emergence of Jackiw-Rebbi states and confirm their localized characteristics. Notably, we achieve a flat-top beam profile by carefully tailoring the Dirac mass distribution, highlighting the potential of this method for customized beam shaping. This experimental realization establishes our approach as a new mechanism for beam control, rooted in topological physics, and offers an efficient strategy for nanophotonic design. △ Less

Submitted 7 October, 2024; originally announced October 2024.

Enabling Clinical Use of Linear Energy Transfer in Proton Therapy for Head and Neck Cancer -- A Review of Implications for Treatment Planning and Adverse Events Study

Authors: Jingyuan Chen, Yunze Yang, Hongying Feng, Chenbin Liu, Lian Zhang, Jason M. Holmes, Zhengliang Liu, Haibo Lin, Tianming Liu, Charles B. Simone II, Nancy Y. Lee, Steven E. Frank, Daniel J. Ma, Samir H. Patel, Wei Liu

Abstract: Proton therapy offers significant advantages due to its unique physical and biological properties, particularly the Bragg peak, enabling precise dose delivery to tumors while sparing healthy tissues. However, the clinical implementation is challenged by the oversimplification of the relative biological effectiveness (RBE) as a fixed value of 1.1, which does not account for the complex interplay be… ▽ More Proton therapy offers significant advantages due to its unique physical and biological properties, particularly the Bragg peak, enabling precise dose delivery to tumors while sparing healthy tissues. However, the clinical implementation is challenged by the oversimplification of the relative biological effectiveness (RBE) as a fixed value of 1.1, which does not account for the complex interplay between dose, linear energy transfer (LET), and biological endpoints. Lack of heterogeneity control or the understanding of the complex interplay may result in unexpected adverse events and suboptimal patient outcomes. On the other hand, expanding our knowledge of variable tumor RBE and LET optimization may provide a better management strategy for radioresistant tumors. This review examines recent advancements in LET calculation methods, including analytical models and Monte Carlo simulations. The integration of LET into plan evaluation is assessed to enhance plan quality control. LET-guided robust optimization demonstrates promise in minimizing high-LET exposure to organs at risk, thereby reducing the risk of adverse events. Dosimetric seed spot analysis is discussed to show its importance in revealing the true LET-related effect upon the adverse event initialization by finding the lesion origins and eliminating the confounding factors from the biological processes. Dose-LET volume histograms (DLVH) are discussed as effective tools for correlating physical dose and LET with clinical outcomes, enabling the derivation of clinically relevant dose-LET volume constraints without reliance on uncertain RBE models. Based on DLVH, the dose-LET volume constraints (DLVC)-guided robust optimization is introduced to upgrade conventional dose-volume constraints-based robust optimization, which optimizes the joint distribution of dose and LET simultaneously. △ Less

Submitted 6 October, 2024; originally announced October 2024.

Observation of spin squeezing with contact interactions in one- and three-dimensional easy-plane magnets

Authors: Yoo Kyung Lee, Maxwell Block, Hanzhen Lin, Vitaly Fedoseev, Philip J. D. Crowley, Norman Y. Yao, Wolfgang Ketterle

Abstract: Entanglement in a many-particle system can enable measurement sensitivities beyond that achievable by only classical correlations. For an ensemble of spins, all-to-all interactions are known to reshape the quantum projection noise, leading to a form of entanglement known as spin squeezing. Here, we demonstrate spin squeezing with strictly short-range contact interactions. In particular, working wi… ▽ More Entanglement in a many-particle system can enable measurement sensitivities beyond that achievable by only classical correlations. For an ensemble of spins, all-to-all interactions are known to reshape the quantum projection noise, leading to a form of entanglement known as spin squeezing. Here, we demonstrate spin squeezing with strictly short-range contact interactions. In particular, working with ultracold lithium atoms in optical lattices, we utilize superexchange interactions to realize a nearest-neighbor anisotropic Heisenberg model. We investigate the resulting quench dynamics from an initial product state in both one and three dimensions. In 1D, we observe $1.9^{+0.7}_{-0.5}$ dB of spin squeezing in quantitative agreement with theory. However, in 3D, we observe a maximum of $2.0^{+0.7}_{-0.7}$ dB of squeezing, over an order of magnitude smaller than that expected. We demonstrate that this discrepancy arises from the presence of a finite density of holes; both the motion of the holes as well as direct coupling between spin and density qualitatively alter the spin dynamics. Our observations point to the importance of understanding the complex interplay between motional and spin degrees of freedom in quantum simulators. △ Less

Submitted 25 September, 2024; originally announced September 2024.

Deep-learning real-time phase retrieval of imperfect diffraction patterns from X-ray free-electron lasers

Authors: Sung Yun Lee, Do Hyung Cho, Chulho Jung, Daeho Sung, Daewoong Nam, Sangsoo Kim, Changyong Song

Abstract: Machine learning is attracting surging interest across nearly all scientific areas by enabling the analysis of large datasets and the extraction of scientific information from incomplete data. Data-driven science is rapidly growing, especially in X-ray methodologies, where advanced light sources and detection technologies accumulate vast amounts of data that exceed meticulous human inspection capa… ▽ More Machine learning is attracting surging interest across nearly all scientific areas by enabling the analysis of large datasets and the extraction of scientific information from incomplete data. Data-driven science is rapidly growing, especially in X-ray methodologies, where advanced light sources and detection technologies accumulate vast amounts of data that exceed meticulous human inspection capabilities. Despite the increasing demands, the full application of machine learning has been hindered by the need for data-specific optimizations. In this study, we introduce a new deep-learning-based phase retrieval method for imperfect diffraction data. This method provides robust phase retrieval for simulated data and performs well on weak-signal single-pulse diffraction data from X-ray free-electron lasers. Moreover, the method significantly reduces data processing time, facilitating real-time image reconstructions that are crucial for high-repetition-rate data acquisition. Thus, this approach offers a reliable solution to the phase problem and is expected to be widely adopted across various research areas. △ Less

Submitted 24 September, 2024; originally announced September 2024.

MSC Class: 68T07 ACM Class: J.2

Color Centers in Hexagonal Boron Nitride

Authors: Suk Hyun Kim, Kyeong Ho Park, Young Gie Lee, Seong Jun Kang, Yongsup Park, Young Duck Kim

Abstract: Atomically thin two-dimensional (2D) hexagonal boron nitride (hBN) has emerged as an essential material for the encapsulation layer in van der Waals heterostructures and efficient deep ultra-violet optoelectronics. This is primarily due to its remarkable physical properties and ultrawide bandgap (close to 6 eV, and even larger in some cases) properties. Color centers in hBN refer to intrinsic vaca… ▽ More Atomically thin two-dimensional (2D) hexagonal boron nitride (hBN) has emerged as an essential material for the encapsulation layer in van der Waals heterostructures and efficient deep ultra-violet optoelectronics. This is primarily due to its remarkable physical properties and ultrawide bandgap (close to 6 eV, and even larger in some cases) properties. Color centers in hBN refer to intrinsic vacancies and extrinsic impurities within the 2D crystal lattice, which result in distinct optical properties in the ultraviolet (UV) to near-infrared (IR) range. Furthermore, each color center in hBN exhibits a unique emission spectrum and possesses various spin properties. These characteristics open up possibilities for the development of next-generation optoelectronics and quantum information applications, including room-temperature single-photon sources and quantum sensors. Here, we provide a comprehensive overview of the atomic configuration, optical and quantum properties, and different techniques employed for the formation of color centers in hBN. A deep understanding of color centers in hBN allows for advances in the development of next-generation UV optoelectronic applications, solid-state quantum technologies, and nanophotonics by harnessing the exceptional capabilities offered by hBN color centers. △ Less

Submitted 12 September, 2024; originally announced September 2024.

Journal ref: Nanomaterials 13, 2344 (2023)

Chalcogenide Metasurfaces Enabling Ultra-Wideband Detectors from Visible to Mid-infrared

Authors: Shutao Zhang, Shu An, Mingjin Dai, Qing Yang Steve Wu, Nur Qalishah Adanan, Jun Zhang, Yan Liu, Henry Yit Loong Lee, Nancy Lai Mun Wong, Ady Suwardi, Jun Ding, Robert Edward Simpson, Qi Jie Wang, Joel K. W. Yang, Zhaogang Dong

Abstract: Thermoelectric materials can be designed to support optical resonances across multiple spectral ranges to enable ultra-wide band photodetection. For instance, antimony telluride (Sb2Te3) chalcogenide exhibits interband plasmonic resonances in the visible range and Mie resonances in the mid-infrared (mid-IR) range, while simultaneously possessing large thermoelectric Seebeck coefficients. In this p… ▽ More Thermoelectric materials can be designed to support optical resonances across multiple spectral ranges to enable ultra-wide band photodetection. For instance, antimony telluride (Sb2Te3) chalcogenide exhibits interband plasmonic resonances in the visible range and Mie resonances in the mid-infrared (mid-IR) range, while simultaneously possessing large thermoelectric Seebeck coefficients. In this paper, we designed and fabricated Sb2Te3 metasurface devices to achieve resonant absorption for enabling photodetectors operating across an ultra-wideband spectrum, from visible to mid-IR. Furthermore, relying on asymmetric Sb2Te3 metasurface, we demonstrated the thermoelectric photodetectors with polarization-selectivity. This work provides a potential platform towards the portable ultrawide band spectrometers at room temperature, for environmental sensing applications. △ Less

Submitted 7 September, 2024; originally announced September 2024.

Lowering threshold of NaI(Tl) scintillator to 0.7 keV in the COSINE-100 experiment

Authors: G. H. Yu, N. Carlin, J. Y. Cho, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. França, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, D. H. Lee , et al. (34 additional authors not shown)

Abstract: COSINE-100 is a direct dark matter search experiment, with the primary goal of testing the annual modulation signal observed by DAMA/LIBRA, using the same target material, NaI(Tl). In previous analyses, we achieved the same 1 keV energy threshold used in the DAMA/LIBRA's analysis that reported an annual modulation signal with 11.6$σ$ significance. In this article, we report an improved analysis th… ▽ More COSINE-100 is a direct dark matter search experiment, with the primary goal of testing the annual modulation signal observed by DAMA/LIBRA, using the same target material, NaI(Tl). In previous analyses, we achieved the same 1 keV energy threshold used in the DAMA/LIBRA's analysis that reported an annual modulation signal with 11.6$σ$ significance. In this article, we report an improved analysis that lowered the threshold to 0.7 keV, thanks to the application of Multi-Layer Perception network and a new likelihood parameter with waveforms in the frequency domain. The lower threshold would enable a better comparison of COSINE-100 with new DAMA results with a 0.75 keV threshold and account for differences in quenching factors. Furthermore the lower threshold can enhance COSINE-100's sensitivity to sub-GeV dark matter searches. △ Less

Submitted 22 December, 2024; v1 submitted 26 August, 2024; originally announced August 2024.

Journal ref: JINST 19 P12013 (2024)

Improved background modeling for dark matter search with COSINE-100

Authors: G. H. Yu, N. Carlin, J. Y. Cho, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Franca, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, D. H. Lee , et al. (33 additional authors not shown)

Abstract: COSINE-100 aims to conclusively test the claimed dark matter annual modulation signal detected by DAMA/LIBRA collaboration. DAMA/LIBRA has released updated analysis results by lowering the energy threshold to 0.75 keV through various upgrades. They have consistently claimed to have observed the annual modulation. In COSINE-100, it is crucial to lower the energy threshold for a direct comparison wi… ▽ More COSINE-100 aims to conclusively test the claimed dark matter annual modulation signal detected by DAMA/LIBRA collaboration. DAMA/LIBRA has released updated analysis results by lowering the energy threshold to 0.75 keV through various upgrades. They have consistently claimed to have observed the annual modulation. In COSINE-100, it is crucial to lower the energy threshold for a direct comparison with DAMA/LIBRA, which also enhances the sensitivity of the search for low-mass dark matter, enabling COSINE-100 to explore this area. Therefore, it is essential to have a precise and quantitative understanding of the background spectrum across all energy ranges. This study expands the background modeling from 0.7 to 4000 keV using 2.82 years of COSINE-100 data. The modeling has been improved to describe the background spectrum across all energy ranges accurately. Assessments of the background spectrum are presented, considering the nonproportionality of NaI(Tl) crystals at both low and high energies and the characteristic X-rays produced by the interaction of external backgrounds with materials such as copper. Additionally, constraints on the fit parameters obtained from the alpha spectrum modeling fit are integrated into this model. These improvements are detailed in the paper. △ Less

Submitted 19 August, 2024; originally announced August 2024.