-
A magneto-ionic synapse for reservoir computing
Authors:
Sreeveni Das,
Rhodri Mansell,
Lukáš Flajšman,
Maria-Andromachi Syskaki,
Jürgen Langer,
Sebastiaan van Dijken
Abstract:
Neuromorphic computing aims to revolutionize large-scale data processing by developing efficient methods and devices inspired by neural networks. Among these, the control of magnetism through ion migration has emerged as a promising approach due to the inherent memory and nonlinearity of ionically conducting and magnetic materials. In this work, we present a lithium-ion-based magneto-ionic device…
▽ More
Neuromorphic computing aims to revolutionize large-scale data processing by developing efficient methods and devices inspired by neural networks. Among these, the control of magnetism through ion migration has emerged as a promising approach due to the inherent memory and nonlinearity of ionically conducting and magnetic materials. In this work, we present a lithium-ion-based magneto-ionic device that uses applied voltages to control the magnetic domain state of a perpendicularly magnetized ferromagnetic layer. This behavior emulates the analog and non-volatile properties of biological synapses and enables the creation of a simple reservoir computing system. To illustrate its capabilities, the device is used in a waveform classification task, where the voltage amplitude range and magnetic bias field are tuned to optimize the recognition accuracy.
△ Less
Submitted 15 December, 2024;
originally announced December 2024.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 10 September, 2024; v1 submitted 17 May, 2023;
originally announced May 2023.
-
Absorption and birefringence study for reduced optical losses in diamond with high NV concentration
Authors:
T. Luo,
F. A. Hahl,
J. Langer,
V. Cimalla,
L. Lindner,
X. Vidal,
M. Haertelt,
R. Blinder,
S. Onoda,
T. Ohshima,
J. Jeske
Abstract:
The use of diamond color centers such as the nitrogen-vacancy (NV) center is increasingly enabling quantum sensing and computing applications. Novel concepts like cavity coupling and readout, laser threshold magnetometry and multi-pass geometries allow significantly improved sensitivity and performance via increased signals and strong light fields. Enabling material properties for these techniques…
▽ More
The use of diamond color centers such as the nitrogen-vacancy (NV) center is increasingly enabling quantum sensing and computing applications. Novel concepts like cavity coupling and readout, laser threshold magnetometry and multi-pass geometries allow significantly improved sensitivity and performance via increased signals and strong light fields. Enabling material properties for these techniques and their further improvements are low optical material losses via optical absorption of signal light and low birefringence. Here we study systematically the behavior of absorption around 700 nm and birefringence with increasing nitrogen- and NV-doping, as well as their behavior during NV creation via diamond growth, electron beam irradiation and annealing treatments. Absorption correlates with increased nitrogen-doping yet substitutional nitrogen does not seem to be the direct absorber. Birefringence reduces with increasing nitrogen doping. We identify multiple crystal defect concentrations via absorption spectroscopy and their changes during the material processing steps and thus identify potential causes of absorption and birefringence as well as strategies to fabricate CVD diamonds with high NV density yet low absorption and low birefringence.
△ Less
Submitted 14 March, 2023;
originally announced March 2023.
-
Optimization of Permalloy properties for magnetic field sensors using He$^+$ irradiation
Authors:
Giovanni Masciocchi,
Johannes Wilhelmus van der Jagt,
Maria-Andromachi Syskaki,
Jürgen Langer,
Gerhard Jakob,
Jeffrey McCord,
Benjamin Borie,
Andreas Kehlberger,
Dafine Ravelosona,
Mathias Kläui
Abstract:
Permalloy, despite being a widely utilized soft magnetic material, still calls for optimization in terms of magnetic softness and magnetostriction for its use in magnetoresistive sensor applications. Conventional annealing methods are often insufficient to locally achieve the desired properties for a narrow parameter range. In this study, we report a significant improvement of the magnetic softnes…
▽ More
Permalloy, despite being a widely utilized soft magnetic material, still calls for optimization in terms of magnetic softness and magnetostriction for its use in magnetoresistive sensor applications. Conventional annealing methods are often insufficient to locally achieve the desired properties for a narrow parameter range. In this study, we report a significant improvement of the magnetic softness and magnetostriction in a 30 nm Permalloy film after He$^+$ irradiation. Compared to the as-deposited state, the irradiation treatment reduces the induced anisotropy by a factor ten and the hard axis coercivity by a factor five. In addition, the effective magnetostriction of the film is significantly reduced by a factor ten - below $1\times10^{-7}$ - after irradiation. All the above mentioned effects can be attributed to the isotropic crystallite growth of the Ni-Fe alloy and to the intermixing at the magnetic layer interfaces under light ion irradiation. We support our findings with X-ray diffraction analysis of the textured Ni$_{81}$Fe$_{19}$ alloy. Importantly, the sizable magnetoresistance is preserved after the irradiation. Our results show that compared to traditional annealing methods, the use of He$^+$ irradiation leads to significant improvements in the magnetic softness and reduces strain cross sensitivity in Permalloy films required for 3D positioning and compass applications. These improvements, in combination with the local nature of the irradiation process make our finding valuable for the optimization of monolithic integrated sensors, where classic annealing methods cannot be applied due to complex interplay within the components in the device.
△ Less
Submitted 2 March, 2023; v1 submitted 28 February, 2023;
originally announced February 2023.
-
Rapid determination of single substitutional nitrogen N$_s^0$ concentration in diamond from UV-Vis spectroscopy
Authors:
T. Luo,
L. Lindner,
R. Blinder,
M. Capelli,
J. Langer,
V. Cimalla,
F. A. Hahl,
X. Vidal,
J. Jeske
Abstract:
Single substitutional nitrogen atoms N$_s^0$ are the prerequisite to create nitrogen-vacancy (NV) centers in diamonds. They serve as the electron donors to create the desired NV$^-$ center, provide charge stability against photo-ionisation, but also are the main source of decoherence. Therefore, precise and quick determination of N$_s^0$ concentration is a key advantage to a multitude of NV-relate…
▽ More
Single substitutional nitrogen atoms N$_s^0$ are the prerequisite to create nitrogen-vacancy (NV) centers in diamonds. They serve as the electron donors to create the desired NV$^-$ center, provide charge stability against photo-ionisation, but also are the main source of decoherence. Therefore, precise and quick determination of N$_s^0$ concentration is a key advantage to a multitude of NV-related research in terms of material improvement as well as applications. Here we present a method to determine the N$_s^0$ concentration based on absorption spectroscopy in the UV-Visible range and fitting the 270 nm absorption band. UV-Visible spectroscopy has experimental simplicity and widespread availability that bear advantages over established methods. It allows a rapid determination of N$_s^0$ densities, even for large numbers of samples. Our method shows further advantages in determining low concentrations as well as the ability to measure locally, which is highly relevant for diamonds with largely varying N$_s^0$ concentrations in a single crystal. A cross-check with electron paramagnetic resonance (EPR) shows high reliability of our method and yields the absorption cross section of the 270~nm absorption band, $σ=1.96\pm0.15$ cm$^{-1}\cdot$ppm$^{-1}$ (in common logarithm) or $σ_e=4.51\pm0.35$ cm$^{-1}\cdot$ppm$^{-1}$ (in natural logarithm), which serves as a reference to determine N$_s^0$ concentrations, and makes our method applicable for others without the need for a known N$_s^0$-reference sample and calibration. We provide a rapid, practical and replicable pathway that is independent of the machine used and can be widely implemented as a standard characterization method for the determination of N$_s^0$ concentrations.
△ Less
Submitted 2 August, 2022; v1 submitted 28 July, 2022;
originally announced July 2022.
-
Control of magnetoelastic coupling in Ni/Fe multilayers using He$^+$ ion irradiation
Authors:
Giovanni Masciocchi,
Johannes Wilhelmus van der Jagt,
Maria-Andromachi Syskaki,
Alessio Lamperti,
Niklas Wolff,
Andriy Lotnyk,
Jürgen Langer,
Lorenz Kienle,
Gerhard Jakob,
Benjamin Borie,
Andreas Kehlberger,
Dafine Ravelosona,
Mathias Kläui
Abstract:
This study reports the effects of post-growth He$^+$ irradiation on the magneto-elastic properties of a $Ni$ /$Fe$ multi-layered stack. The progressive intermixing caused by He$^+$ irradiation at the interfaces of the multilayer allows us to tune the saturation magnetostriction value with increasing He$^+$ fluences, and even to induce a reversal of the sign of the magnetostrictive effect. Addition…
▽ More
This study reports the effects of post-growth He$^+$ irradiation on the magneto-elastic properties of a $Ni$ /$Fe$ multi-layered stack. The progressive intermixing caused by He$^+$ irradiation at the interfaces of the multilayer allows us to tune the saturation magnetostriction value with increasing He$^+$ fluences, and even to induce a reversal of the sign of the magnetostrictive effect. Additionally, the critical fluence at which the absolute value of the magnetostriction is dramatically reduced is identified. Therefore insensitivity to strain of the magnetic stack is nearly reached, as required for many applications. All the above mentioned effects are attributed to the combination of the negative saturation magnetostriction of sputtered Ni, Fe layers and the positive magnetostriction of the Ni$_{x}$Fe$_{1-x}$ alloy at the intermixed interfaces, whose contribution is gradually increased with irradiation. Importantly the irradiation does not alter the layers polycrystalline structure, confirming that post-growth He$^+$ ion irradiation is an excellent tool to tune the magneto-elastic properties of magnetic samples. A new class of spintronic devices can be envisioned with a material treatment able to arbitrarily change the magnetostriction with ion-induced "magnetic patterning".
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
Creation of nitrogen-vacancy centers in chemical vapor deposition diamond for sensing applications
Authors:
T. Luo,
L. Lindner,
J. Langer,
V. Cimalla,
F. Hahl,
C. Schreyvogel,
S. Onoda,
S. Ishii,
T. Ohshima,
D. Wang,
D. A. Simpson,
B. C. Johnson,
M. Capelli,
R. Blinder,
J. Jeske
Abstract:
The nitrogen-vacancy (NV) center in diamond is a promising quantum system for magnetometry applications exhibiting optical readout of minute energy shifts in its spin sub-levels. Key material requirements for NV ensembles are a high NV$^-$ concentration, a long spin coherence time and a stable charge state. However, these are interdependent and can be difficult to optimize during diamond growth an…
▽ More
The nitrogen-vacancy (NV) center in diamond is a promising quantum system for magnetometry applications exhibiting optical readout of minute energy shifts in its spin sub-levels. Key material requirements for NV ensembles are a high NV$^-$ concentration, a long spin coherence time and a stable charge state. However, these are interdependent and can be difficult to optimize during diamond growth and subsequent NV creation. In this work, we systematically investigate the NV center formation and properties in chemical vapor deposition (CVD) diamond. The nitrogen flow during growth is varied by over 4 orders of magnitude, resulting in a broad range of single substitutional nitrogen concentrations of 0.2-20 parts per million. For a fixed nitrogen concentration, we optimize electron-irradiation fluences with two different accelerated electron energies, and we study defect formation via optical characterizations. We discuss a general approach to determine the optimal irradiation conditions, for which an enhanced NV concentration and an optimum of NV charge states can both be satisfied. We achieve spin-spin coherence times T$_2$ ranging from 45.5 to 549 $μ$s for CVD diamonds containing 168 to 1 parts per billion NV$^-$ centers, respectively. This study shows a pathway to engineer properties of NV-doped CVD diamonds for improved sensitivity.
△ Less
Submitted 15 November, 2021;
originally announced November 2021.
-
Size-dependent enhancement of passive microwave rectification in magnetic tunnel junctions with perpendicular magnetic anisotropy
Authors:
A. Sidi El Valli,
V. Iurchuk,
G. Lezier,
I. Bendjeddou,
R. Lebrun,
N. Lamard,
A. Litvinenko,
J. Langer,
J. Wrona,
L. Vila,
R. Sousa,
I. L. Prejbeanu,
B. Dieny,
U. Ebels
Abstract:
Spintronic rf detectors were demonstrated, recently, for energy harvesting and wireless communication at low input power. Here we report on the optimization of the rectified output dc voltage using magnetic tunnel junctions (MTJ) with strong perpendicular anisotropy (PMA) of both the polarizing and the free layer. The magnetization of the polarizing layer is fixed out of plane, while the free laye…
▽ More
Spintronic rf detectors were demonstrated, recently, for energy harvesting and wireless communication at low input power. Here we report on the optimization of the rectified output dc voltage using magnetic tunnel junctions (MTJ) with strong perpendicular anisotropy (PMA) of both the polarizing and the free layer. The magnetization of the polarizing layer is fixed out of plane, while the free layer thickness is adjusted so that its magnetization orientation changes from in plane to out of plane. The rectification dc output voltage lies in the mV range for moderate rf powers, with a signal to noise ratio of 10 to 100 for Prf = -25dBm. It shows a strong dependence on the dimensions of the MTJ: it increases by a factor of 5 to 6 when reducing the diameter from 150nm to 20nm. This enhancement can be doubled when reducing the FL thickness from 1.8nm to 1.6nm. This dimensional enhancement is attributed to the change of the effective anisotropy of the excited free layer, and the MTJ resistance. The results are of interest for the design of spintronic based rf detectors with optimized sensitivity.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Multiple magneto-ionic regimes in Ta/Co$_{20}$Fe$_{60}$B$_{20}$/HfO$_{2}$
Authors:
R. Pachat,
D. Ourdani,
J. W. van der Jagt,
M. -A. Syskaki,
A. Di Pietro,
Y. Roussigné,
S. Ono,
M. S. Gabor,
M. Chérif,
G. Durin,
J. Langer,
M. Belmeguenai,
D. Ravelosona,
L. Herrera Diez
Abstract:
In Ta/CoFeB/HfO2 stacks a gate voltage drives, in a nonvolatile way, the system from an underoxidized state exhibiting in-plane anisotropy (IPA) to an optimum oxidation level resulting in perpendicular anisotropy (PMA) and further into an overoxidized state with IPA. The IPA$\,\to\,$PMA regime is found to be significantly faster than the PMA$\,\to\,$IPA regime, while only the latter shows full rev…
▽ More
In Ta/CoFeB/HfO2 stacks a gate voltage drives, in a nonvolatile way, the system from an underoxidized state exhibiting in-plane anisotropy (IPA) to an optimum oxidation level resulting in perpendicular anisotropy (PMA) and further into an overoxidized state with IPA. The IPA$\,\to\,$PMA regime is found to be significantly faster than the PMA$\,\to\,$IPA regime, while only the latter shows full reversibility under the same gate voltages. The effective damping parameter also shows a marked dependence with gate voltage in the IPA$\,\to\,$PMA regime, going from 0.029 to 0.012, and only a modest increase to 0.014 in the PMA$\,\to\,$IPA regime. The existence of two magneto-ionic regimes has been linked to a difference in the chemical environment of the anchoring points of oxygen species added to underoxidized or overoxidized layers. Our results show that multiple magneto-ionic regimes can exist in a single device and that their characterization is of great importance for the design of high performance spintronics devices.
△ Less
Submitted 12 May, 2021;
originally announced May 2021.
-
Validation of a temperature-dependent elasto-viscoplastic material model for a talcum-filled polypropylene/polyethylene co-polymer using glove box flap component tests
Authors:
David Degenhardt,
Jan Langer,
Lars Greve,
Tom Karl Eller,
Michael Andres,
Peter Horst
Abstract:
In the automotive industry, thermoplastic polymers are used for a significant number of interior and exterior parts. These components have to pass all underlying crash and safety relevant tests, where a proper performance is desired in the range of low to high ambient temperatures. Today, the vehicle design is heavily aided by numerical simulation methods for advancing towards a prototype free veh…
▽ More
In the automotive industry, thermoplastic polymers are used for a significant number of interior and exterior parts. These components have to pass all underlying crash and safety relevant tests, where a proper performance is desired in the range of low to high ambient temperatures. Today, the vehicle design is heavily aided by numerical simulation methods for advancing towards a prototype free vehicle development. This requires an accurate modeling of the temperature- and ratedependent, elasto-viscoplastic mechanical response of the polymer structures. In this work, the validation of a novel elasto-viscoplastic temperature-dependent material model is performed using glove box flap segments subjected to impact loading by a spherical punch in a custom-build loading frame. The proposed material model shows a very good prediction of the experimental results.
△ Less
Submitted 25 June, 2019;
originally announced June 2019.
-
Current-induced magnetization switching in atom-thick tungsten engineered perpendicular magnetic tunnel junctions with large tunnel magnetoresistance
Authors:
Mengxing Wang,
Wenlong Cai,
Kaihua Cao,
Jiaqi Zhou,
Jerzy Wrona,
Shouzhong Peng,
Huaiwen Yang,
Jiaqi Wei,
Wang Kang,
Youguang Zhang,
Jürgen Langer,
Berthold Ocker,
Albert Fert,
Weisheng Zhao
Abstract:
Perpendicular magnetic tunnel junctions based on MgO/CoFeB structures are of particular interest for magnetic random-access memories because of their excellent thermal stability, scaling potential, and power dissipation. However, the major challenge of current-induced switching in the nanopillars with both a large tunnel magnetoresistance ratio and a low junction resistance is still to be met. Her…
▽ More
Perpendicular magnetic tunnel junctions based on MgO/CoFeB structures are of particular interest for magnetic random-access memories because of their excellent thermal stability, scaling potential, and power dissipation. However, the major challenge of current-induced switching in the nanopillars with both a large tunnel magnetoresistance ratio and a low junction resistance is still to be met. Here, we report spin transfer torque switching in nano-scale perpendicular magnetic tunnel junctions with a magnetoresistance ratio up to 249% and a resistance area product as low as 7.0 Ω.μm2, which consists of atom-thick W layers and double MgO/CoFeB interfaces. The efficient resonant tunnelling transmission induced by the atom-thick W layers could contribute to the larger magnetoresistance ratio than conventional structures with Ta layers, in addition to the robustness of W layers against high temperature diffusion during annealing. The switching critical current density could be lower than 3.0 MA.cm-2 for devices with a 45 nm radius.
△ Less
Submitted 23 January, 2018; v1 submitted 14 August, 2017;
originally announced August 2017.
-
Forecasting the onset and course of mental illness with Twitter data
Authors:
Andrew G. Reece,
Andrew J. Reagan,
Katharina L. M. Lix,
Peter Sheridan Dodds,
Christopher M. Danforth,
Ellen J. Langer
Abstract:
We developed computational models to predict the emergence of depression and Post-Traumatic Stress Disorder in Twitter users. Twitter data and details of depression history were collected from 204 individuals (105 depressed, 99 healthy). We extracted predictive features measuring affect, linguistic style, and context from participant tweets (N=279,951) and built models using these features with su…
▽ More
We developed computational models to predict the emergence of depression and Post-Traumatic Stress Disorder in Twitter users. Twitter data and details of depression history were collected from 204 individuals (105 depressed, 99 healthy). We extracted predictive features measuring affect, linguistic style, and context from participant tweets (N=279,951) and built models using these features with supervised learning algorithms. Resulting models successfully discriminated between depressed and healthy content, and compared favorably to general practitioners' average success rates in diagnosing depression. Results held even when the analysis was restricted to content posted before first depression diagnosis. State-space temporal analysis suggests that onset of depression may be detectable from Twitter data several months prior to diagnosis. Predictive results were replicated with a separate sample of individuals diagnosed with PTSD (174 users, 243,775 tweets). A state-space time series model revealed indicators of PTSD almost immediately post-trauma, often many months prior to clinical diagnosis. These methods suggest a data-driven, predictive approach for early screening and detection of mental illness.
△ Less
Submitted 27 August, 2016;
originally announced August 2016.
-
Stick-slip instabilities in sheared granular flow: the role of friction and acoustic vibrations
Authors:
Charles K. C. Lieou,
Ahmed E. Elbanna,
J. S. Langer,
J. M. Carlson
Abstract:
We propose a theory of shear flow in dense granular materials. A key ingredient of the theory is an effective temperature that determines how the material responds to external driving forces such as shear stresses and vibrations. We show that, within our model, friction between grains produces stick-slip behavior at intermediate shear rates, even if the material is rate-strengthening at larger rat…
▽ More
We propose a theory of shear flow in dense granular materials. A key ingredient of the theory is an effective temperature that determines how the material responds to external driving forces such as shear stresses and vibrations. We show that, within our model, friction between grains produces stick-slip behavior at intermediate shear rates, even if the material is rate-strengthening at larger rates. In addition, externally generated acoustic vibrations alter the stick-slip amplitude, or suppress stick-slip altogether, depending on the pressure and shear rate. We construct a phase diagram that indicates the parameter regimes for which stick-slip occurs in the presence and absence of acoustic vibrations of a fixed amplitude and frequency. These results connect the microscopic physics to macroscopic dynamics, and thus produce useful information about a variety of granular phenomena including rupture and slip along earthquake faults, the remote triggering of instabilities, and the control of friction in material processing.
△ Less
Submitted 14 July, 2015; v1 submitted 31 May, 2015;
originally announced June 2015.
-
Shear flow of angular grains: acoustic effects and non-monotonic rate dependence of volume
Authors:
Charles K. C. Lieou,
Ahmed E. Elbanna,
J. S. Langer,
J. M. Carlson
Abstract:
Naturally-occurring granular materials often consist of angular particles whose shape and frictional characteristics may have important implications on macroscopic flow rheology. In this paper, we provide a theoretical account for the peculiar phenomenon of auto-acoustic compaction -- non-monotonic variation of shear band volume with shear rate in angular particles -- recently observed in experime…
▽ More
Naturally-occurring granular materials often consist of angular particles whose shape and frictional characteristics may have important implications on macroscopic flow rheology. In this paper, we provide a theoretical account for the peculiar phenomenon of auto-acoustic compaction -- non-monotonic variation of shear band volume with shear rate in angular particles -- recently observed in experiments. Our approach is based on the notion that the volume of a granular material is determined by an effective-disorder temperature known as the compactivity. Noise sources in a driven granular material couple its various degrees of freedom and the environment, causing the flow of entropy between them. The grain-scale dynamics is described by the shear-transformation-zone (STZ) theory of granular flow, which accounts for irreversible plastic deformation in terms of localized flow defects whose density is governed by the state of configurational disorder. To model the effects of grain shape and frictional characteristics, we propose an Ising-like internal variable to account for nearest-neighbor grain interlocking and geometric frustration, and interpret the effect of friction as an acoustic noise strength. We show quantitative agreement between experimental measurements and theoretical predictions, and propose additional experiments that provide stringent tests on the new theoretical elements.
△ Less
Submitted 27 August, 2014; v1 submitted 6 May, 2014;
originally announced May 2014.
