-
Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
A. Abada
, et al. (1439 additional authors not shown)
Abstract:
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;…
▽ More
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase.
FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible.
FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes.
This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I…
▽ More
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region.
The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.…
▽ More
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Seismotectonics and Slip Behavior of a Submarine Plate Boundary Fault from Seismicity Repeaters and Tomography using a high-resolution earthquake catalog from machine learning
Authors:
D. Lange,
Y. Ren,
I. Grevemeyer
Abstract:
The Blanco transform fault system (BTFS) is highly segmented and represents an evolving transform plate boundary in the Northeast Pacific Ocean. Its seismic behavior was captured with a dense network of 54 ocean-bottom-seismometers operated for one year. We created a high-resolution earthquake catalog based on different machine learning onset pickers, resulting in a high-resolution seismicity cata…
▽ More
The Blanco transform fault system (BTFS) is highly segmented and represents an evolving transform plate boundary in the Northeast Pacific Ocean. Its seismic behavior was captured with a dense network of 54 ocean-bottom-seismometers operated for one year. We created a high-resolution earthquake catalog based on different machine learning onset pickers, resulting in a high-resolution seismicity catalog with 12.708 events outlining the current deformation and stress release along a major transform fault. Seismicity reveals lateral changes of seismic behavior, indicating seismic and aseismic fault patches or segments, complex along-strike and off-axis deformation, step-overs, and internal faulting within pull-apart basins. Seismicity along simple linear fault strands is localized within 2 km of the seafloor expression of the fault. Repeaters indicate an average of 21 cm slip, exceeding the geological slip rate by ~4 times. Based on the repeater behavior, we suggest that the (overall aseismic) slip is spatially very heterogeneous, consisting of many small seismic patches, each one releasing its seismic slip every 4 years. Along the BTFS, the coupling of the fault is variable and varies between fully locked and fully creeping. Local earthquake tomography shows elevated vp/vs values exceeding 2, suggesting significant serpentinization from seawater entering the transform faults, the oceanic crust and mantle. The study shows how to use modern machine learning pickers on OBS data to provide essential insights into the physics of faulting along major plate boundary faults in time and space, including the partitioning of slip seismic and aseismic faulting with high resolution.
△ Less
Submitted 21 March, 2025;
originally announced March 2025.
-
Characterising the Atacama segment of the Chile subduction margin (24°S-31°S) with >165,000 earthquakes
Authors:
Jannes Münchmeyer,
Diego Molina-Ormazabal,
David Marsan,
Mickaël Langlais,
Juan-Carlos Baez,
Ben Heit,
Diego González-Vidal,
Marcos Moreno,
Frederik Tilmann,
Dietrich Lange,
Anne Socquet
Abstract:
The Atacama segment in Northern Chile (24°S to 31°S) is a mature seismic gap with no major event (Mw>8) since 1922. In addition to regular seismicity, around the subducting Copiapó ridge, the region hosts seismic swarms, and shallow and deep slow slip events. To characterize the fine structure of this seismic gap and its seismic-aseismic interplay, we instrumented the region with almost 200 seismi…
▽ More
The Atacama segment in Northern Chile (24°S to 31°S) is a mature seismic gap with no major event (Mw>8) since 1922. In addition to regular seismicity, around the subducting Copiapó ridge, the region hosts seismic swarms, and shallow and deep slow slip events. To characterize the fine structure of this seismic gap and its seismic-aseismic interplay, we instrumented the region with almost 200 seismic and geodetic stations. Using machine learning, we derived a dense, high-resolution seismicity catalog, encompassing over 165,000 events with double-difference relocated hypocenters. Our catalog details the outer rise, interface, intraslab, crustal and mantle wedge seismicity. We infer a detailed slab geometry, showing that the flat slab is dipping towards the south with a narrower extent along dip. The slab geometry controls the intraslab seismicity, with cross-cutting activity in the region of highest bending and a downdip limit around 105 km slab depth. Our catalogue exhibits significant seismicity in the mantle wedge upper corner between 28°S and 31°S, highlighting the brittle behavior of the cold nose. On the subduction interface, interplate locking controls the updip end of the seismicity, with seismicity extending closer to the trench in low-locking areas. On fine scales, resolved by relative uncertainties below 50 m, the subduction interface has a complex 3D structure, showing a fractal distribution of seismic patches down to a scale of tens of meters. Our results provide a holistic view of this complex subduction zone, while at the same time giving insights into fine-scale structures and processes.
△ Less
Submitted 24 January, 2025;
originally announced January 2025.
-
Optimization Using Pathwise Algorithmic Derivatives of Electromagnetic Shower Simulations
Authors:
Max Aehle,
Mihály Novák,
Vassil Vassilev,
Nicolas R. Gauger,
Lukas Heinrich,
Michael Kagan,
David Lange
Abstract:
Among the well-known methods to approximate derivatives of expectancies computed by Monte-Carlo simulations, averages of pathwise derivatives are often the easiest one to apply. Computing them via algorithmic differentiation typically does not require major manual analysis and rewriting of the code, even for very complex programs like simulations of particle-detector interactions in high-energy ph…
▽ More
Among the well-known methods to approximate derivatives of expectancies computed by Monte-Carlo simulations, averages of pathwise derivatives are often the easiest one to apply. Computing them via algorithmic differentiation typically does not require major manual analysis and rewriting of the code, even for very complex programs like simulations of particle-detector interactions in high-energy physics. However, the pathwise derivative estimator can be biased if there are discontinuities in the program, which may diminish its value for applications.
This work integrates algorithmic differentiation into the electromagnetic shower simulation code HepEmShow based on G4HepEm, allowing us to study how well pathwise derivatives approximate derivatives of energy depositions in a sampling calorimeter with respect to parameters of the beam and geometry. We found that when multiple scattering is disabled in the simulation, means of pathwise derivatives converge quickly to their expected values, and these are close to the actual derivatives of the energy deposition. Additionally, we demonstrate the applicability of this novel gradient estimator for stochastic gradient-based optimization in a model example.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Probing new bosons and nuclear structure with ytterbium isotope shifts
Authors:
Menno Door,
Chih-Han Yeh,
Matthias Heinz,
Fiona Kirk,
Chunhai Lyu,
Takayuki Miyagi,
Julian C. Berengut,
Jacek Bieroń,
Klaus Blaum,
Laura S. Dreissen,
Sergey Eliseev,
Pavel Filianin,
Melina Filzinger,
Elina Fuchs,
Henning A. Fürst,
Gediminas Gaigalas,
Zoltán Harman,
Jost Herkenhoff,
Nils Huntemann,
Christoph H. Keitel,
Kathrin Kromer,
Daniel Lange,
Alexander Rischka,
Christoph Schweiger,
Achim Schwenk
, et al. (2 additional authors not shown)
Abstract:
In this Letter, we present mass-ratio measurements on highly charged Yb$^{42+}$ ions with a precision of $4\times 10^{-12}$ and isotope-shift measurements on Yb$^{+}$ on the $^{2}$S$_{1/2}$ $\to$ $^{2}$D$_{5/2}$ and $^{2}$S$_{1/2}$ $\to$ $^{2}$F$_{7/2}$ transitions with a precision of $4\times 10^{-9}$ for the isotopes $^{168,170,172,174,176}$Yb. We present a new method that allows us to extract h…
▽ More
In this Letter, we present mass-ratio measurements on highly charged Yb$^{42+}$ ions with a precision of $4\times 10^{-12}$ and isotope-shift measurements on Yb$^{+}$ on the $^{2}$S$_{1/2}$ $\to$ $^{2}$D$_{5/2}$ and $^{2}$S$_{1/2}$ $\to$ $^{2}$F$_{7/2}$ transitions with a precision of $4\times 10^{-9}$ for the isotopes $^{168,170,172,174,176}$Yb. We present a new method that allows us to extract higher-order changes in the nuclear charge distribution along the Yb isotope chain, benchmarking ab-initio nuclear structure calculations. Additionally, we perform a King plot analysis to set bounds on a fifth force in the keV$/c^2$ to MeV$/c^2$ range coupling to electrons and neutrons.
△ Less
Submitted 14 January, 2025; v1 submitted 12 March, 2024;
originally announced March 2024.
-
Fast Silicon Carbide MOSFET based high-voltage push-pull switch for charge state separation of highly charged ions with a Bradbury-Nielsen Gate
Authors:
Christoph Schweiger,
Menno Door,
Pavel Filianin,
Jost Herkenhoff,
Kathrin Kromer,
Daniel Lange,
Domenik Marschall,
Alexander Rischka,
Thomas Wagner,
Sergey Eliseev,
Klaus Blaum
Abstract:
In this paper we report on the development of a fast high-voltage switch, which is based on two enhancement mode N-channel Silicon Carbide Metal Oxide Semiconductor Field-Effect Transistors in push-pull configuration. The switch is capable of switching high voltages up to 600 V on capacitive loads with rise and fall times on the order of 10 ns and pulse widths $\leq$ 20 ns. Using this switch it wa…
▽ More
In this paper we report on the development of a fast high-voltage switch, which is based on two enhancement mode N-channel Silicon Carbide Metal Oxide Semiconductor Field-Effect Transistors in push-pull configuration. The switch is capable of switching high voltages up to 600 V on capacitive loads with rise and fall times on the order of 10 ns and pulse widths $\leq$ 20 ns. Using this switch it was demonstrated that from the charge state distribution of bunches of highly charged ions ejected from an electron beam ion trap with a specific kinetic energy, single charge states can be separated by fast switching of the high voltage applied to a Bradbury-Nielsen Gate with a resolving power of about 100.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Observation of a low-lying metastable electronic state in highly charged lead by Penning-trap mass spectrometry
Authors:
Kathrin Kromer,
Chunhai Lyu,
Menno Door,
Pavel Filianin,
Zoltán Harman,
Jost Herkenhoff,
Paul Indelicato,
Christoph H. Keitel,
Daniel Lange,
Yuri N. Novikov,
Christoph Schweiger,
Sergey Eliseev,
Klaus Blaum
Abstract:
Highly charged ions (HCIs) offer many opportunities for next-generation clock research due to the vast landscape of available electronic transitions in different charge states. The development of XUV frequency combs has enabled the search for clock transitions based on shorter wavelengths in HCIs. However, without initial knowledge of the energy of the clock states, these narrow transitions are di…
▽ More
Highly charged ions (HCIs) offer many opportunities for next-generation clock research due to the vast landscape of available electronic transitions in different charge states. The development of XUV frequency combs has enabled the search for clock transitions based on shorter wavelengths in HCIs. However, without initial knowledge of the energy of the clock states, these narrow transitions are difficult to be probed by lasers. In this Letter, we provide experimental observation and theoretical calculation of a long-lived electronic state in Nb-like Pb$^{41+}$ which could be used as a clock state. With the mass spectrometer Pentatrap, the excitation energy of this metastable state is directly determined as a mass difference at an energy of 31.2(8) eV, corresponding to one of the most precise relative mass determinations to date with a fractional uncertainty of $4\times10^{-12}$. This experimental result agrees within 1 $σ$ with two partially different \textit{ab initio} multi-configuration Dirac-Hartree-Fock calculations of 31.68(13) eV and 31.76(35) eV, respectively. With a calculated lifetime of 26.5(5.3) days, the transition from this metastable state to the ground state bears a quality factor of $1.1\times10^{23}$ and allows for the construction of a HCI clock with a fractional frequency instability of $<10^{-19}/\sqrtτ$.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
High-precision determination of $g$ factors and masses of $^{20}\text{Ne}^{9+}$ and $^{22}\text{Ne}^{9+}$
Authors:
F. Heiße,
M. Door,
T. Sailer,
P. Filianin,
J. Herkenhoff,
C. M. König,
K. Kromer,
D. Lange,
J. Morgner,
A. Rischka,
Ch. Schweiger,
B. Tu.,
Y. N. Novikov,
S. Eliseev,
S. Sturm,
K. Blaum
Abstract:
We present the measurements of individual bound electron $g$ factors of $^{20}\text{Ne}^{9+}$ and $^{22}\text{Ne}^{9+}$ on the relative level of $0.1\,\text{parts}$ per billion. The comparison with theory represents the most stringent test of bound-state QED in strong electric fields. A dedicated mass measurement results in $m\left(^{20}\text{Ne}\right)=19.992\,440\,168\,77\,(9)\,\text{u}$, which…
▽ More
We present the measurements of individual bound electron $g$ factors of $^{20}\text{Ne}^{9+}$ and $^{22}\text{Ne}^{9+}$ on the relative level of $0.1\,\text{parts}$ per billion. The comparison with theory represents the most stringent test of bound-state QED in strong electric fields. A dedicated mass measurement results in $m\left(^{20}\text{Ne}\right)=19.992\,440\,168\,77\,(9)\,\text{u}$, which improves the current literature value by a factor of nineteen, disagrees by $4$ standard deviations and represents the most precisely measured mass value in atomic mass units. Together, these measurements yield an electron mass on the relative level of $0.1\,\text{ppb}$ with $m_{\text{e}}=5.485\,799\,090\,99\,(59) \times 10^{-4}\,\text{u}$ as well as a factor of eight improved $m\left(^{22}\text{Ne}\right)=21.991\,385\,098\,2\,(26)\,\text{u}$.
△ Less
Submitted 17 October, 2023;
originally announced October 2023.
-
PickBlue: Seismic phase picking for ocean bottom seismometers with deep learning
Authors:
Thomas Bornstein,
Dietrich Lange,
Jannes Münchmeyer,
Jack Woollam,
Andreas Rietbrock,
Grace Barcheck,
Ingo Grevemeyer,
Frederik Tilmann
Abstract:
Detecting phase arrivals and pinpointing the arrival times of seismic phases in seismograms is crucial for many seismological analysis workflows. For land station data machine learning methods have already found widespread adoption. However, deep learning approaches are not yet commonly applied to ocean bottom data due to a lack of appropriate training data and models. Here, we compiled an extensi…
▽ More
Detecting phase arrivals and pinpointing the arrival times of seismic phases in seismograms is crucial for many seismological analysis workflows. For land station data machine learning methods have already found widespread adoption. However, deep learning approaches are not yet commonly applied to ocean bottom data due to a lack of appropriate training data and models. Here, we compiled an extensive and labeled ocean bottom seismometer dataset from 15 deployments in different tectonic settings, comprising ~90,000 P and ~63,000 S manual picks from 13,190 events and 355 stations. We propose PickBlue, an adaptation ot the two popular deep learning networks EQTransformer and PhaseNet. PickBlue joint processes three seismometer recordings in conjunction with a hydrophone component and is trained with the waveforms in the new database. The performance is enhanced by employing transfer learning, where initial weights are derived from models trained with land earthquake data. PickBlue significantly outperforms neural networks trained with land stations and models trained without hydrophone data. The model achieves a mean absolute deviation (MAD) of 0.05 s for P waves and 0.12 s for S waves. We integrate our dataset and trained models into SeisBench to enable an easy and direct application in future deployments.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
High-precision mass measurement of doubly magic $^{208}$Pb
Authors:
Kathrin Kromer,
Chunhai Lyu,
Menno Door,
Pavel Filianin,
Zoltán Harman,
Jost Herkenhoff,
Wenjia Huang,
Christoph H. Keitel,
Daniel Lange,
Yuri N. Novikov,
Christoph Schweiger,
Sergey Eliseev,
Klaus Blaum
Abstract:
The absolute atomic mass of $^{208}$Pb has been determined with a fractional uncertainty of $7\times 10^{-11}$ by measuring the cyclotron-frequency ratio $R$ of $^{208}$Pb$^{41+}$ to $^{132}$Xe$^{26+}$ with the high-precision Penning-trap mass spectrometer Pentatrap and computing the binding energies $E_{\text{Pb}}$ and $E_{\text{Xe}}$ of the missing 41 and 26 atomic electrons, respectively, with…
▽ More
The absolute atomic mass of $^{208}$Pb has been determined with a fractional uncertainty of $7\times 10^{-11}$ by measuring the cyclotron-frequency ratio $R$ of $^{208}$Pb$^{41+}$ to $^{132}$Xe$^{26+}$ with the high-precision Penning-trap mass spectrometer Pentatrap and computing the binding energies $E_{\text{Pb}}$ and $E_{\text{Xe}}$ of the missing 41 and 26 atomic electrons, respectively, with the ab initio fully relativistic multi-configuration Dirac-Hartree-Fock (MCDHF) method. $R$ has been measured with a relative precision of $9\times 10^{-12}$. $E_{\text{Pb}}$ and $E_{\text{Xe}}$ have been computed with an uncertainty of 9.1 eV and 2.1 eV, respectively, yielding $207.976\,650\,571(14)$ u (u$=9.314\,941\,024\,2(28)\times 10^{8}$ eV/c$^2$) for the $^{208}$Pb neutral atomic mass. This result agrees within $1.2σ$ with that from the Atomic-Mass Evaluation (AME) 2020, while improving the precision by almost two orders of magnitude. The new mass value directly improves the mass precision of 14 nuclides in the region of Z=81-84 and is the most precise mass value with A>200. Thus, the measurement establishes a new region of reference mass values which can be used e.g. for precision mass determination of transuranium nuclides, including the superheavies.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
SeisBench -- A Toolbox for Machine Learning in Seismology
Authors:
Jack Woollam,
Jannes Münchmeyer,
Frederik Tilmann,
Andreas Rietbrock,
Dietrich Lange,
Thomas Bornstein,
Tobias Diehl,
Carlo Giunchi,
Florian Haslinger,
Dario Jozinović,
Alberto Michelini,
Joachim Saul,
Hugo Soto
Abstract:
Machine Learning (ML) methods have seen widespread adoption in seismology in recent years. The ability of these techniques to efficiently infer the statistical properties of large datasets often provides significant improvements over traditional techniques. With the entire spectrum of seismological tasks, e.g., seismic picking, source property estimation, ground motion prediction, hypocentre deter…
▽ More
Machine Learning (ML) methods have seen widespread adoption in seismology in recent years. The ability of these techniques to efficiently infer the statistical properties of large datasets often provides significant improvements over traditional techniques. With the entire spectrum of seismological tasks, e.g., seismic picking, source property estimation, ground motion prediction, hypocentre determination; among others, now incorporating ML approaches, numerous models are emerging as these techniques are further adopted within seismology. To evaluate these algorithms, quality controlled benchmark datasets that contain representative class distributions are vital. In addition to this, models require implementation through a common framework to facilitate comparison. Accessing these various benchmark datasets for training and implementing the standardization of models is currently a time-consuming process, hindering further advancement of ML techniques within seismology. These development bottlenecks also affect "practitioners" seeking to deploy the latest models on seismic data, without having to necessarily learn entirely new ML frameworks to perform this task. We present SeisBench as a software package to tackle these issues. SeisBench is an open-source framework for deploying ML in seismology. SeisBench standardises access to both models and datasets, whilst also providing a range of common processing and data augmentation operations through the API. Through SeisBench, users can access several seismological ML models and benchmark datasets available in the literature via a single interface. SeisBench is built to be extensible, with community involvement encouraged to expand the package. Having such frameworks available for accessing leading ML models forms an essential tool for seismologists seeking to iterate and apply the next generation of ML techniques to seismic data.
△ Less
Submitted 1 November, 2021;
originally announced November 2021.
-
Which picker fits my data? A quantitative evaluation of deep learning based seismic pickers
Authors:
Jannes Münchmeyer,
Jack Woollam,
Andreas Rietbrock,
Frederik Tilmann,
Dietrich Lange,
Thomas Bornstein,
Tobias Diehl,
Carlo Giunchi,
Florian Haslinger,
Dario Jozinović,
Alberto Michelini,
Joachim Saul,
Hugo Soto
Abstract:
Seismic event detection and phase picking are the base of many seismological workflows. In recent years, several publications demonstrated that deep learning approaches significantly outperform classical approaches and even achieve human-like performance under certain circumstances. However, as most studies differ in the datasets and exact evaluation tasks studied, it is yet unclear how the differ…
▽ More
Seismic event detection and phase picking are the base of many seismological workflows. In recent years, several publications demonstrated that deep learning approaches significantly outperform classical approaches and even achieve human-like performance under certain circumstances. However, as most studies differ in the datasets and exact evaluation tasks studied, it is yet unclear how the different approaches compare to each other. Furthermore, there are no systematic studies how the models perform in a cross-domain scenario, i.e., when applied to data with different characteristics. Here, we address these questions by conducting a large-scale benchmark study. We compare six previously published deep learning models on eight datasets covering local to teleseismic distances and on three tasks: event detection, phase identification and onset time picking. Furthermore, we compare the results to a classical Baer-Kradolfer picker. Overall, we observe the best performance for EQTransformer, GPD and PhaseNet, with EQTransformer having a small advantage for teleseismic data. Furthermore, we conduct a cross-domain study, in which we analyze model performance on datasets they were not trained on. We show that trained models can be transferred between regions with only mild performance degradation, but not from regional to teleseismic data or vice versa. As deep learning for detection and picking is a rapidly evolving field, we ensured extensibility of our benchmark by building our code on standardized frameworks and making it openly accessible. This allows model developers to easily compare new models or evaluate performance on new datasets, beyond those presented here. Furthermore, we make all trained models available through the SeisBench framework, giving end-users an easy way to apply these models in seismological analysis.
△ Less
Submitted 26 October, 2021;
originally announced October 2021.
-
A Digital Feedback System for Advanced Ion Manipulation Techniques in Penning Traps
Authors:
Jost Herkenhoff,
Menno Door,
Pavel Filianin,
Wenjia Huang,
Kathrin Kromer,
Daniel Lange,
Rima X. Schüssler,
Christoph Schweiger,
Sergey Eliseev,
Klaus Blaum
Abstract:
The possibility to apply active feedback to a single ion in a Penning trap using a fully digital system is demonstrated. Previously realized feedback systems rely on analog circuits that are susceptible to environmental fluctuations and long term drifts, as well as being limited to the specific task they were designed for. The presented system is implemented using an FPGA-based platform (STEMlab),…
▽ More
The possibility to apply active feedback to a single ion in a Penning trap using a fully digital system is demonstrated. Previously realized feedback systems rely on analog circuits that are susceptible to environmental fluctuations and long term drifts, as well as being limited to the specific task they were designed for. The presented system is implemented using an FPGA-based platform (STEMlab), offering greater flexibility, higher temporal stability and the possibility for highly dynamic variation of feedback parameters. The system's capabilities were demonstrated by applying feedback to the ion detection system primarily consisting of a resonant circuit. This allowed shifts in its resonance frequency of up to several kHz and free modification of its quality factor within two orders of magnitude, which reduces the temperature of a single ion by a factor of 6. Furthermore, a phase-sensitive detection technique for the axial ion oscillation was implemented, which reduces the current measurement time by two orders of magnitude while simultaneously eliminating model-related systematic uncertainties. The use of FPGA technology allowed the implementation of a fully-featured data acquisition system, making it possible to realize feedback techniques that require constant monitoring of the ion signal. This was successfully used to implement a single-ion self-excited oscillator.
△ Less
Submitted 4 October, 2021;
originally announced October 2021.
-
HL-LHC Computing Review Stage-2, Common Software Projects: Event Generators
Authors:
The HSF Physics Event Generator WG,
:,
Efe Yazgan,
Josh McFayden,
Andrea Valassi,
Simone Amoroso,
Enrico Bothmann,
Andy Buckley,
John Campbell,
Gurpreet Singh Chahal,
Taylor Childers,
Gloria Corti,
Rikkert Frederix,
Stefano Frixione,
Francesco Giuli,
Alexander Grohsjean,
Stefan Hoeche,
Phil Ilten,
Frank Krauss,
Michal Kreps,
David Lange,
Leif Lonnblad,
Zach Marshall,
Olivier Mattelaer,
Stephen Mrenna
, et al. (14 additional authors not shown)
Abstract:
This paper has been prepared by the HEP Software Foundation (HSF) Physics Event Generator Working Group (WG), as an input to the second phase of the LHCC review of High-Luminosity LHC (HL-LHC) computing, which is due to take place in November 2021. It complements previous documents prepared by the WG in the context of the first phase of the LHCC review in 2020, including in particular the WG paper…
▽ More
This paper has been prepared by the HEP Software Foundation (HSF) Physics Event Generator Working Group (WG), as an input to the second phase of the LHCC review of High-Luminosity LHC (HL-LHC) computing, which is due to take place in November 2021. It complements previous documents prepared by the WG in the context of the first phase of the LHCC review in 2020, including in particular the WG paper on the specific challenges in Monte Carlo event generator software for HL-LHC, which has since been updated and published, and which we are also submitting to the November 2021 review as an integral part of our contribution.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
Learning from the Pandemic: the Future of Meetings in HEP and Beyond
Authors:
Mark S. Neubauer,
Todd Adams,
Jennifer Adelman-McCarthy,
Gabriele Benelli,
Tulika Bose,
David Britton,
Pat Burchat,
Joel Butler,
Timothy A. Cartwright,
Tomáš Davídek,
Jacques Dumarchez,
Peter Elmer,
Matthew Feickert,
Ben Galewsky,
Mandeep Gill,
Maciej Gladki,
Aman Goel,
Jonathan E. Guyer,
Bo Jayatilaka,
Brendan Kiburg,
Benjamin Krikler,
David Lange,
Claire Lee,
Nick Manganelli,
Giovanni Marchiori
, et al. (14 additional authors not shown)
Abstract:
The COVID-19 pandemic has by-and-large prevented in-person meetings since March 2020. While the increasing deployment of effective vaccines around the world is a very positive development, the timeline and pathway to "normality" is uncertain and the "new normal" we will settle into is anyone's guess. Particle physics, like many other scientific fields, has more than a year of experience in holding…
▽ More
The COVID-19 pandemic has by-and-large prevented in-person meetings since March 2020. While the increasing deployment of effective vaccines around the world is a very positive development, the timeline and pathway to "normality" is uncertain and the "new normal" we will settle into is anyone's guess. Particle physics, like many other scientific fields, has more than a year of experience in holding virtual meetings, workshops, and conferences. A great deal of experimentation and innovation to explore how to execute these meetings effectively has occurred. Therefore, it is an appropriate time to take stock of what we as a community learned from running virtual meetings and discuss possible strategies for the future. Continuing to develop effective strategies for meetings with a virtual component is likely to be important for reducing the carbon footprint of our research activities, while also enabling greater diversity and inclusion for participation. This report summarizes a virtual two-day workshop on Virtual Meetings held May 5-6, 2021 which brought together experts from both inside and outside of high-energy physics to share their experiences and practices with organizing and executing virtual workshops, and to develop possible strategies for future meetings as we begin to emerge from the COVID-19 pandemic. This report outlines some of the practices and tools that have worked well which we hope will serve as a valuable resource for future virtual meeting organizers in all scientific fields.
△ Less
Submitted 29 June, 2021;
originally announced June 2021.
-
HL-LHC Computing Review: Common Tools and Community Software
Authors:
HEP Software Foundation,
:,
Thea Aarrestad,
Simone Amoroso,
Markus Julian Atkinson,
Joshua Bendavid,
Tommaso Boccali,
Andrea Bocci,
Andy Buckley,
Matteo Cacciari,
Paolo Calafiura,
Philippe Canal,
Federico Carminati,
Taylor Childers,
Vitaliano Ciulli,
Gloria Corti,
Davide Costanzo,
Justin Gage Dezoort,
Caterina Doglioni,
Javier Mauricio Duarte,
Agnieszka Dziurda,
Peter Elmer,
Markus Elsing,
V. Daniel Elvira,
Giulio Eulisse
, et al. (85 additional authors not shown)
Abstract:
Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this doc…
▽ More
Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this document we address the issues for software that is used in multiple experiments (usually even more widely than ATLAS and CMS) and maintained by teams of developers who are either not linked to a particular experiment or who contribute to common software within the context of their experiment activity. We also give space to general considerations for future software and projects that tackle upcoming challenges, no matter who writes it, which is an area where community convergence on best practice is extremely useful.
△ Less
Submitted 31 August, 2020;
originally announced August 2020.
-
Using HEP experiment workflows for the benchmarking and accounting of WLCG computing resources
Authors:
Andrea Valassi,
Manfred Alef,
Jean-Michel Barbet,
Olga Datskova,
Riccardo De Maria,
Miguel Fontes Medeiros,
Domenico Giordano,
Costin Grigoras,
Christopher Hollowell,
Martina Javurkova,
Viktor Khristenko,
David Lange,
Michele Michelotto,
Lorenzo Rinaldi,
Andrea Sciabà,
Cas Van Der Laan
Abstract:
Benchmarking of CPU resources in WLCG has been based on the HEP-SPEC06 (HS06) suite for over a decade. It has recently become clear that HS06, which is based on real applications from non-HEP domains, no longer describes typical HEP workloads. The aim of the HEP-Benchmarks project is to develop a new benchmark suite for WLCG compute resources, based on real applications from the LHC experiments. B…
▽ More
Benchmarking of CPU resources in WLCG has been based on the HEP-SPEC06 (HS06) suite for over a decade. It has recently become clear that HS06, which is based on real applications from non-HEP domains, no longer describes typical HEP workloads. The aim of the HEP-Benchmarks project is to develop a new benchmark suite for WLCG compute resources, based on real applications from the LHC experiments. By construction, these new benchmarks are thus guaranteed to have a score highly correlated to the throughputs of HEP applications, and a CPU usage pattern similar to theirs. Linux containers and the CernVM-FS filesystem are the two main technologies enabling this approach, which had been considered impossible in the past. In this paper, we review the motivation, implementation and outlook of the new benchmark suite.
△ Less
Submitted 25 June, 2020; v1 submitted 3 April, 2020;
originally announced April 2020.
-
HEP Software Foundation Community White Paper Working Group -- Conditions Data
Authors:
Paul Laycock,
Marko Bracko,
Marco Clemencic,
Dave Dykstra,
Andrea Formica,
Giacomo Govi,
Michel Jouvin,
David Lange,
Lynn Wood
Abstract:
To produce the best physics results, high energy physics experiments require access to calibration and other non-event data during event data processing. These conditions data are typically stored in databases that provide versioning functionality, allowing physicists to make improvements while simultaneously guaranteeing the reproducibility of their results. With the increased complexity of moder…
▽ More
To produce the best physics results, high energy physics experiments require access to calibration and other non-event data during event data processing. These conditions data are typically stored in databases that provide versioning functionality, allowing physicists to make improvements while simultaneously guaranteeing the reproducibility of their results. With the increased complexity of modern experiments, and the evolution of computing models that demand large scale access to conditions data, the solutions for managing this access have evolved over time. In this white paper we give an overview of the conditions data access problem, present convergence on a common solution and present some considerations for the future.
△ Less
Submitted 16 January, 2019;
originally announced January 2019.
-
Building a scalable python distribution for HEP data analysis
Authors:
David Lange
Abstract:
There are numerous approaches to building analysis applications across the high-energy physics community. Among them are Python-based, or at least Python-driven, analysis workflows. We aim to ease the adoption of a Python-based analysis toolkit by making it easier for non-expert users to gain access to Python tools for scientific analysis. Experimental software distributions and individual user an…
▽ More
There are numerous approaches to building analysis applications across the high-energy physics community. Among them are Python-based, or at least Python-driven, analysis workflows. We aim to ease the adoption of a Python-based analysis toolkit by making it easier for non-expert users to gain access to Python tools for scientific analysis. Experimental software distributions and individual user analysis have quite different requirements. Distributions tend to worry most about stability, usability and reproducibility, while the users usually strive to be fast and nimble. We discuss how we built and now maintain a python distribution for analysis while satisfying requirements both a large software distribution (in our case, that of CMSSW) and user, or laptop, level analysis. We pursued the integration of tools used by the broader data science community as well as HEP developed (e.g., histogrammar, root_numpy) Python packages. We discuss concepts we investigated for package integration and testing, as well as issues we encountered through this process. Distribution and platform support are important topics. We discuss our approach and progress towards a sustainable infrastructure for supporting this Python stack for the CMS user community and for the broader HEP user community.
△ Less
Submitted 24 April, 2018;
originally announced April 2018.
-
HEP Software Foundation Community White Paper Working Group - Data Analysis and Interpretation
Authors:
Lothar Bauerdick,
Riccardo Maria Bianchi,
Brian Bockelman,
Nuno Castro,
Kyle Cranmer,
Peter Elmer,
Robert Gardner,
Maria Girone,
Oliver Gutsche,
Benedikt Hegner,
José M. Hernández,
Bodhitha Jayatilaka,
David Lange,
Mark S. Neubauer,
Daniel S. Katz,
Lukasz Kreczko,
James Letts,
Shawn McKee,
Christoph Paus,
Kevin Pedro,
Jim Pivarski,
Martin Ritter,
Eduardo Rodrigues,
Tai Sakuma,
Elizabeth Sexton-Kennedy
, et al. (4 additional authors not shown)
Abstract:
At the heart of experimental high energy physics (HEP) is the development of facilities and instrumentation that provide sensitivity to new phenomena. Our understanding of nature at its most fundamental level is advanced through the analysis and interpretation of data from sophisticated detectors in HEP experiments. The goal of data analysis systems is to realize the maximum possible scientific po…
▽ More
At the heart of experimental high energy physics (HEP) is the development of facilities and instrumentation that provide sensitivity to new phenomena. Our understanding of nature at its most fundamental level is advanced through the analysis and interpretation of data from sophisticated detectors in HEP experiments. The goal of data analysis systems is to realize the maximum possible scientific potential of the data within the constraints of computing and human resources in the least time. To achieve this goal, future analysis systems should empower physicists to access the data with a high level of interactivity, reproducibility and throughput capability. As part of the HEP Software Foundation Community White Paper process, a working group on Data Analysis and Interpretation was formed to assess the challenges and opportunities in HEP data analysis and develop a roadmap for activities in this area over the next decade. In this report, the key findings and recommendations of the Data Analysis and Interpretation Working Group are presented.
△ Less
Submitted 9 April, 2018;
originally announced April 2018.
-
HEP Community White Paper on Software trigger and event reconstruction: Executive Summary
Authors:
Johannes Albrecht,
Kenneth Bloom,
Tommaso Boccali,
Antonio Boveia,
Michel De Cian,
Caterina Doglioni,
Agnieszka Dziurda,
Amir Farbin,
Conor Fitzpatrick,
Frank Gaede,
Simon George,
Vladimir Gligorov,
Hadrien Grasland,
Lucia Grillo,
Benedikt Hegner,
William Kalderon,
Sami Kama,
Patrick Koppenburg,
Slava Krutelyov,
Rob Kutschke,
Walter Lampl,
David Lange,
Ed Moyse,
Andrew Norman,
Marko Petric
, et al. (17 additional authors not shown)
Abstract:
Realizing the physics programs of the planned and upgraded high-energy physics (HEP) experiments over the next 10 years will require the HEP community to address a number of challenges in the area of software and computing. For this reason, the HEP software community has engaged in a planning process over the past two years, with the objective of identifying and prioritizing the research and devel…
▽ More
Realizing the physics programs of the planned and upgraded high-energy physics (HEP) experiments over the next 10 years will require the HEP community to address a number of challenges in the area of software and computing. For this reason, the HEP software community has engaged in a planning process over the past two years, with the objective of identifying and prioritizing the research and development required to enable the next generation of HEP detectors to fulfill their full physics potential. The aim is to produce a Community White Paper which will describe the community strategy and a roadmap for software and computing research and development in HEP for the 2020s. The topics of event reconstruction and software triggers were considered by a joint working group and are summarized together in this document.
△ Less
Submitted 23 February, 2018;
originally announced February 2018.
-
HEP Community White Paper on Software trigger and event reconstruction
Authors:
Johannes Albrecht,
Kenneth Bloom,
Tommaso Boccali,
Antonio Boveia,
Michel De Cian,
Caterina Doglioni,
Agnieszka Dziurda,
Amir Farbin,
Conor Fitzpatrick,
Frank Gaede,
Simon George,
Vladimir Gligorov,
Hadrien Grasland,
Lucia Grillo,
Benedikt Hegner,
William Kalderon,
Sami Kama,
Patrick Koppenburg,
Slava Krutelyov,
Rob Kutschke,
Walter Lampl,
David Lange,
Ed Moyse,
Andrew Norman,
Marko Petric
, et al. (17 additional authors not shown)
Abstract:
Realizing the physics programs of the planned and upgraded high-energy physics (HEP) experiments over the next 10 years will require the HEP community to address a number of challenges in the area of software and computing. For this reason, the HEP software community has engaged in a planning process over the past two years, with the objective of identifying and prioritizing the research and devel…
▽ More
Realizing the physics programs of the planned and upgraded high-energy physics (HEP) experiments over the next 10 years will require the HEP community to address a number of challenges in the area of software and computing. For this reason, the HEP software community has engaged in a planning process over the past two years, with the objective of identifying and prioritizing the research and development required to enable the next generation of HEP detectors to fulfill their full physics potential. The aim is to produce a Community White Paper which will describe the community strategy and a roadmap for software and computing research and development in HEP for the 2020s. The topics of event reconstruction and software triggers were considered by a joint working group and are summarized together in this document.
△ Less
Submitted 23 February, 2018;
originally announced February 2018.
-
HEP Software Foundation Community White Paper Working Group - Software Development, Deployment and Validation
Authors:
Benjamin Couturier,
Giulio Eulisse,
Hadrien Grasland,
Benedikt Hegner,
Michel Jouvin,
Meghan Kane,
Daniel S. Katz,
Thomas Kuhr,
David Lange,
Patricia Mendez Lorenzo,
Martin Ritter,
Graeme Andrew Stewart,
Andrea Valassi
Abstract:
The High Energy Phyiscs community has developed and needs to maintain many tens of millions of lines of code and to integrate effectively the work of thousands of developers across large collaborations. Software needs to be built, validated, and deployed across hundreds of sites. Software also has a lifetime of many years, frequently beyond that of the original developer, it must be developed with…
▽ More
The High Energy Phyiscs community has developed and needs to maintain many tens of millions of lines of code and to integrate effectively the work of thousands of developers across large collaborations. Software needs to be built, validated, and deployed across hundreds of sites. Software also has a lifetime of many years, frequently beyond that of the original developer, it must be developed with sustainability in mind. Adequate recognition of software development as a critical task in the HEP community needs to be fostered and an appropriate publication and citation strategy needs to be developed. As part of the HEP Softare Foundation's Community White Paper process a working group on Software Development, Deployment and Validation was formed to examine all of these issues, identify best practice and to formulare recommendations for the next decade. Its report is presented here.
△ Less
Submitted 15 June, 2018; v1 submitted 21 December, 2017;
originally announced December 2017.
-
A Roadmap for HEP Software and Computing R&D for the 2020s
Authors:
Johannes Albrecht,
Antonio Augusto Alves Jr,
Guilherme Amadio,
Giuseppe Andronico,
Nguyen Anh-Ky,
Laurent Aphecetche,
John Apostolakis,
Makoto Asai,
Luca Atzori,
Marian Babik,
Giuseppe Bagliesi,
Marilena Bandieramonte,
Sunanda Banerjee,
Martin Barisits,
Lothar A. T. Bauerdick,
Stefano Belforte,
Douglas Benjamin,
Catrin Bernius,
Wahid Bhimji,
Riccardo Maria Bianchi,
Ian Bird,
Catherine Biscarat,
Jakob Blomer,
Kenneth Bloom,
Tommaso Boccali
, et al. (285 additional authors not shown)
Abstract:
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for…
▽ More
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for the HL-LHC in particular, it is critical that all of the collaborating stakeholders agree on the software goals and priorities, and that the efforts complement each other. In this spirit, this white paper describes the R&D activities required to prepare for this software upgrade.
△ Less
Submitted 19 December, 2018; v1 submitted 18 December, 2017;
originally announced December 2017.
-
Snowmass Computing Frontier: Software Development, Staffing and Training
Authors:
David Brown,
Peter Elmer,
Ruth Pordes,
David Asner,
Gregory Dubois-Felsmann,
V. Daniel Elvira,
Robert Hatcher,
Chris Jones,
Robert Kutschke,
David Lange,
Elizabeth Sexton-Kennedy,
Craig Tull
Abstract:
Report of the Snowmass CpF-I4 subgroup on Software Development, Staffing and Training
Report of the Snowmass CpF-I4 subgroup on Software Development, Staffing and Training
△ Less
Submitted 11 November, 2013;
originally announced November 2013.
-
Charged Kaon Mass Measurement using the Cherenkov Effect
Authors:
The MIPP Collaboration,
N. Graf,
A. Lebedev,
R. J. Abrams,
U. Akgun,
G. Aydin,
W. Baker,
P. D. Barnes Jr.,
T. Bergfeld,
L. Beverly,
A. Bujak,
D. Carey,
C. Dukes,
F. Duru,
G. J. Feldman,
A. Godley,
E. Gülmez,
Y. O. Günaydın,
H. R. Gustafson,
L. Gutay,
E. Hartouni,
P. Hanlet,
S. Hansen,
M. Heffner,
C. Johnstone
, et al. (38 additional authors not shown)
Abstract:
The two most recent and precise measurements of the charged kaon mass use X-rays from kaonic atoms and report uncertainties of 14 ppm and 22 ppm yet differ from each other by 122 ppm. We describe the possibility of an independent mass measurement using the measurement of Cherenkov light from a narrow-band beam of kaons, pions, and protons. This technique was demonstrated using data taken opportu…
▽ More
The two most recent and precise measurements of the charged kaon mass use X-rays from kaonic atoms and report uncertainties of 14 ppm and 22 ppm yet differ from each other by 122 ppm. We describe the possibility of an independent mass measurement using the measurement of Cherenkov light from a narrow-band beam of kaons, pions, and protons. This technique was demonstrated using data taken opportunistically by the Main Injector Particle Production experiment at Fermi National Accelerator Laboratory which recorded beams of protons, kaons, and pions ranging in momentum from +37 GeV/c to +63 GeV/c. The measured value is 491.3 +/- 1.7 MeV/c^2, which is within 1.4 sigma of the world average. An improvement of two orders of magnitude in precision would make this technique useful for resolving the ambiguity in the X-ray data and may be achievable in a dedicated experiment.
△ Less
Submitted 4 January, 2010; v1 submitted 4 September, 2009;
originally announced September 2009.
-
Determination of atomic scattering lengths from measurements of molecular binding energies near Feshbach resonances
Authors:
A. D. Lange,
K. Pilch,
A. Prantner,
F. Ferlaino,
B. Engeser,
H. -C. Naegerl,
R. Grimm,
C. Chin
Abstract:
We present an analytic model to calculate the atomic scattering length near a Feshbach resonance from data on the molecular binding energy. Our approach considers finite-range square-well potentials and can be applied near broad, narrow, or even overlapping Feshbach resonances. We test our model on Cs$_2$ Feshbach molecules. We measure the binding energy using magnetic-field modulation spectrosc…
▽ More
We present an analytic model to calculate the atomic scattering length near a Feshbach resonance from data on the molecular binding energy. Our approach considers finite-range square-well potentials and can be applied near broad, narrow, or even overlapping Feshbach resonances. We test our model on Cs$_2$ Feshbach molecules. We measure the binding energy using magnetic-field modulation spectroscopy in a range where one broad and two narrow Feshbach resonances overlap. From the data we accurately determine the Cs atomic scattering length and the positions and widths of two particular resonances.
△ Less
Submitted 9 April, 2009; v1 submitted 30 October, 2008;
originally announced October 2008.
-
Comparison of hyperfine anomalies in the 5S_{1/2} and 6S_{1/2} levels of ^{85}Rb and ^{87}Rb
Authors:
A. Perez Galvan,
Y. Zhao,
L. A. Orozco,
E. Gomez,
A. D. Lange,
F. Baumer,
G. D. Sprouse
Abstract:
We observe a hyperfine anomaly in the measurement of the hyperfine splitting of the 6S_{1/2} excited level in rubidium. We perform two step spectroscopy using the 5S_{1/2}->5P_{1/2}->6S_{1/2} excitation sequence. We measure the splitting of the 6S1/2 level and obtain for the magnetic dipole constants of ^{85}Rb and ^{87}Rb A = 239.18(4) MHz and A=807.66(8) MHz, respectively. The hyperfine anomal…
▽ More
We observe a hyperfine anomaly in the measurement of the hyperfine splitting of the 6S_{1/2} excited level in rubidium. We perform two step spectroscopy using the 5S_{1/2}->5P_{1/2}->6S_{1/2} excitation sequence. We measure the splitting of the 6S1/2 level and obtain for the magnetic dipole constants of ^{85}Rb and ^{87}Rb A = 239.18(4) MHz and A=807.66(8) MHz, respectively. The hyperfine anomaly difference of_{87}delta_{85}=-0.0036(2) comes from the Bohr Weisskopf effect: a correction to the point interaction between the finite nuclear magnetization and the electrons, and agrees with that obtained in the 5S_{1/2} ground state.
△ Less
Submitted 11 February, 2008;
originally announced February 2008.
-
Lifetime Measurement of the 6s Level of Rubidium
Authors:
E. Gomez,
F. Baumer,
A. D. Lange,
G. D. Sprouse,
L. A. Orozco
Abstract:
We present a lifetime measurements of the 6s level of rubidium. We use a time-correlated single-photon counting technique on two different samples of rubidium atoms. A vapor cell with variable rubidium density and a sample of atoms confined and cooled in a magneto-optical trap. The 5P_{1/2} level serves as the resonant intermediate step for the two step excitation to the 6s level. We detect the…
▽ More
We present a lifetime measurements of the 6s level of rubidium. We use a time-correlated single-photon counting technique on two different samples of rubidium atoms. A vapor cell with variable rubidium density and a sample of atoms confined and cooled in a magneto-optical trap. The 5P_{1/2} level serves as the resonant intermediate step for the two step excitation to the 6s level. We detect the decay of the 6s level through the cascade fluorescence of the 5P_{3/2} level at 780 nm. The two samples have different systematic effects, but we obtain consistent results that averaged give a lifetime of 45.57 +- 0.17 ns.
△ Less
Submitted 16 February, 2005;
originally announced February 2005.
