Showing 1–50 of 78 results for author: Lai, C

Brillouin lasers in Bragg grating microresonators

Authors: Ryan L. Russell, Moritz Merklein, Choon Kong Lai, Cong Tinh Bui, Alvaro Casas-Bedoya, Duk-Yong Choi, Stephen J. Madden, Benjamin J. Eggleton

Abstract: Chip-scale coherent light sources are required in applications spanning metrology and sensing to telecommunications. Brillouin lasers (BLs) offer a route to ultra-coherent optical sources in compact microresonators with free spectral range (FSR) matched to the Brillouin frequency shift (BFS). However, BFS - FSR matching typically facilitates cascaded Brillouin scattering, constraining achievable B… ▽ More Chip-scale coherent light sources are required in applications spanning metrology and sensing to telecommunications. Brillouin lasers (BLs) offer a route to ultra-coherent optical sources in compact microresonators with free spectral range (FSR) matched to the Brillouin frequency shift (BFS). However, BFS - FSR matching typically facilitates cascaded Brillouin scattering, constraining achievable BL output power and coherence. Here, we demonstrate inhibition of cascading in a planar-integrated chalcogenide microresonator by exploiting the photonic bandgap (PBG) associated with a post-fabrication inscribed, reconfigurable intracavity Bragg grating. The PBG inhibits energy transfer within the target Brillouin scattering pathway, such as from pump to first-order Stokes wave. As a quantitative measure of Brillouin scattering inhibition, we report at least six-fold increase in threshold for onset of BL oscillation, which is ultimately limited by thermorefraction. For on-chip pump power of 399 mW, sufficient for a tenth-order Brillouin cascade, complete inhibition was achieved. Our work positions Bragg grating microresonators as an enabling platform for high performance on-chip BL sources, with reconfigurable modes of operation. △ Less

Submitted 4 June, 2025; originally announced June 2025.

Multiple Descents in Deep Learning as a Sequence of Order-Chaos Transitions

Authors: Wenbo Wei, Nicholas Chong Jia Le, Choy Heng Lai, Ling Feng

Abstract: We observe a novel 'multiple-descent' phenomenon during the training process of LSTM, in which the test loss goes through long cycles of up and down trend multiple times after the model is overtrained. By carrying out asymptotic stability analysis of the models, we found that the cycles in test loss are closely associated with the phase transition process between order and chaos, and the local opt… ▽ More We observe a novel 'multiple-descent' phenomenon during the training process of LSTM, in which the test loss goes through long cycles of up and down trend multiple times after the model is overtrained. By carrying out asymptotic stability analysis of the models, we found that the cycles in test loss are closely associated with the phase transition process between order and chaos, and the local optimal epochs are consistently at the critical transition point between the two phases. More importantly, the global optimal epoch occurs at the first transition from order to chaos, where the 'width' of the 'edge of chaos' is the widest, allowing the best exploration of better weight configurations for learning. △ Less

Submitted 26 May, 2025; originally announced May 2025.

The First Hardware Demonstration of a Universal Programmable RRAM-based Probabilistic Computer for Molecular Docking

Authors: Yihan He, Ming-Chun Hong, Qiming Ding, Chih-Sheng Lin, Chih-Ming Lai, Chao Fang, Xiao Gong, Tuo-Hung Hou, Gengchiau Liang

Abstract: Molecular docking is a critical computational strategy in drug design and discovery, but the complex diversity of biomolecular structures and flexible binding conformations create an enormous search space that challenges conventional computing methods. Although quantum computing holds promise for these challenges, it remains constrained by scalability, hardware limitations, and precision issues. H… ▽ More Molecular docking is a critical computational strategy in drug design and discovery, but the complex diversity of biomolecular structures and flexible binding conformations create an enormous search space that challenges conventional computing methods. Although quantum computing holds promise for these challenges, it remains constrained by scalability, hardware limitations, and precision issues. Here, we report a prototype of a probabilistic computer (p-computer) that efficiently and accurately solves complex molecular docking for the first time, overcoming previously encountered challenges. At the core of the system is a p-computing chip based upon our artificial tunable probabilistic bits (p-bits), which are compatible with computing-in-memory schemes, based upon 180 nm CMOS technology and BEOL HfO2 RRAM. We successfully demonstrated the superior performance of the p-computer in practical ligand-protein docking scenarios. A 42-node molecular docking problem of lipoprotein with LolA-LolCDE complex-a key point in developing antibiotics against Gram-negative bacteria, was successfully solved. Our results align well with the Protein-Ligand Interaction Profiler tool. This work marks the first application of p-computing in molecular docking-based computational biology, which has great potential to overcome the limitations in success rate and efficiency of current technologies in addressing complex bioinformatics problems. △ Less

Submitted 26 March, 2025; originally announced March 2025.

Comments: The main text comprises 24 pages with 5 figures. The supplementary information includes 9 pages, containing Supplementary Figures S1 to S3 and Supplementary Tables S1 to S9

Scaffold-Assisted Window Junctions for Superconducting Qubit Fabrication

Authors: Chung-Ting Ke, Jun-Yi Tsai, Yen-Chun Chen, Zhen-Wei Xu, Elam Blackwell, Matthew A. Snyder, Spencer Weeden, Peng-Sheng Chen, Chih-Ming Lai, Shyh-Shyuan Sheu, Zihao Yang, Cen-Shawn Wu, Alan Ho, R. McDermott, John Martinis, Chii-Dong Chen

Abstract: The superconducting qubit is one of the promising directions in realizing fault-tolerant quantum computing (FTQC), which requires many high-quality qubits. To achieve this, it is desirable to leverage modern semiconductor industry technology to ensure quality, uniformity, and reproducibility. However, conventional Josephson junction fabrication relies mainly on resist-assistant double-angle evapor… ▽ More The superconducting qubit is one of the promising directions in realizing fault-tolerant quantum computing (FTQC), which requires many high-quality qubits. To achieve this, it is desirable to leverage modern semiconductor industry technology to ensure quality, uniformity, and reproducibility. However, conventional Josephson junction fabrication relies mainly on resist-assistant double-angle evaporation, posing integration challenges. Here, we demonstrate a lift-off-free qubit fabrication that integrates seamlessly with existing industrial technologies. This method employs a silicon oxide (SiO$_2$) scaffold to define an etched window with a well-controlled size to form a Josephson junction. The SiO$_2$, which has a large dielectric loss, is etched away in the final step using vapor HF leaving little residue. This Window junction (WJ) process mitigates the degradation of qubit quality during fabrication and allows clean removal of the scaffold. The WJ process is validated by inspection and Josephson junction measurement. The scaffold removal process is verified by measuring the quality factor of the resonators. Furthermore, compared to scaffolds fabricated by plasma-enhanced chemical vapor deposition (PECVD), qubits made by WJ through physical vapor deposition (PVD) achieve relaxation time up to $57\,μ\text{s}$. Our results pave the way for a lift-off-free qubit fabrication process, designed to be compatible with modern foundry tools and capable of minimizing damage to the substrate and material surfaces. △ Less

Submitted 13 March, 2025; originally announced March 2025.

Isotropic Metamaterial Stiffness Beyond Hashin-Shtrikman Upper Bound

Authors: Manish Kumar Singh, Chang Quan Lai

Abstract: Since its introduction more than 60 years ago, the Hashin-Shtrikman upper bound has stood as the theoretical limit for the stiffness of isotropic composites and porous solids, acting as an important reference against which the moduli of heterogeneous structural materials are assessed. Here, we show through first-principles calculations, supported by finite element simulations, that the Hashin-Shtr… ▽ More Since its introduction more than 60 years ago, the Hashin-Shtrikman upper bound has stood as the theoretical limit for the stiffness of isotropic composites and porous solids, acting as an important reference against which the moduli of heterogeneous structural materials are assessed. Here, we show through first-principles calculations, supported by finite element simulations, that the Hashin-Shtrikman upper bound can be exceeded by the isotropic elastic response of an anisotropic structure constructed from an anisotropic material. The material and structural anisotropies mutually reinforce each other to realize the overall isotropic response, without incurring the mass penalty faced by the hybridization of geometries with complementary anisotropies. 3 designs were investigated (plate BCC, plate FCC and plate SC) but only plate SC yielded a solution for the anisotropic properties of the material, which are remarkably similar to that of single crystal nickel and single crystal ferrite. △ Less

Submitted 18 November, 2024; originally announced November 2024.

Comments: Supplementary Information available at the end of the article

LipidBERT: A Lipid Language Model Pre-trained on METiS de novo Lipid Library

Authors: Tianhao Yu, Cai Yao, Zhuorui Sun, Feng Shi, Lin Zhang, Kangjie Lyu, Xuan Bai, Andong Liu, Xicheng Zhang, Jiali Zou, Wenshou Wang, Chris Lai, Kai Wang

Abstract: In this study, we generate and maintain a database of 10 million virtual lipids through METiS's in-house de novo lipid generation algorithms and lipid virtual screening techniques. These virtual lipids serve as a corpus for pre-training, lipid representation learning, and downstream task knowledge transfer, culminating in state-of-the-art LNP property prediction performance. We propose LipidBERT,… ▽ More In this study, we generate and maintain a database of 10 million virtual lipids through METiS's in-house de novo lipid generation algorithms and lipid virtual screening techniques. These virtual lipids serve as a corpus for pre-training, lipid representation learning, and downstream task knowledge transfer, culminating in state-of-the-art LNP property prediction performance. We propose LipidBERT, a BERT-like model pre-trained with the Masked Language Model (MLM) and various secondary tasks. Additionally, we compare the performance of embeddings generated by LipidBERT and PhatGPT, our GPT-like lipid generation model, on downstream tasks. The proposed bilingual LipidBERT model operates in two languages: the language of ionizable lipid pre-training, using in-house dry-lab lipid structures, and the language of LNP fine-tuning, utilizing in-house LNP wet-lab data. This dual capability positions LipidBERT as a key AI-based filter for future screening tasks, including new versions of METiS de novo lipid libraries and, more importantly, candidates for in vivo testing for orgran-targeting LNPs. To the best of our knowledge, this is the first successful demonstration of the capability of a pre-trained language model on virtual lipids and its effectiveness in downstream tasks using web-lab data. This work showcases the clever utilization of METiS's in-house de novo lipid library as well as the power of dry-wet lab integration. △ Less

Submitted 3 May, 2025; v1 submitted 12 August, 2024; originally announced August 2024.

Asymmetric deformations of a perturbed spherical bubble in an incompressible fluid

Authors: Chen-Chih Lai, Michael I. Weinstein

Abstract: We study the dynamics of a gas bubble in a fluid with surface tension, initially near a spherical equilibrium. While there are many studies and applications of radial bubble dynamics, the theory of general deformations from a spherical equilibrium is less developed. We aim to understand how asymmetrically perturbed equilibrium bubbles evolve toward spherical equilibrium due to thermal or viscous d… ▽ More We study the dynamics of a gas bubble in a fluid with surface tension, initially near a spherical equilibrium. While there are many studies and applications of radial bubble dynamics, the theory of general deformations from a spherical equilibrium is less developed. We aim to understand how asymmetrically perturbed equilibrium bubbles evolve toward spherical equilibrium due to thermal or viscous dissipation in an incompressible liquid. We focus on the isobaric approximation [Prosperetti, JFM, 1991], under which the gas pressure within the bubble is spatially uniform and obeys the ideal gas law. The liquid outside the bubble is incompressible, irrotational, and has surface tension. We prove that any equilibrium gas bubble must be spherical by showing that the bubble boundary is a closed surface of constant mean curvature. We then study the initial value problem (IVP) for the coupled PDEs, constitutive laws and interface conditions of the isobaric approximation for general (asymmetric) small initial perturbations of the spherical bubble in the linearized approximation. Our first result, considering thermal damping without viscosity, proves that the linearized IVP is globally well-posed. The monopole (radial) component of the perturbation decays exponentially over time, while the multipole (non-radial) components undergo undamped oscillations. This indicates a limitation of the isobaric model for non-spherical dynamics. Our second result, incorporating viscous dissipation, shows that the IVP is linear and nonlinearly ill-posed due to an incompatibility of normal stress boundary conditions, for non-spherical solutions, and the irrotationality assumption. Our study concludes that to accurately capture the dynamics of general deformations of a gas bubble, the model must account for either vorticity generated at the bubble-fluid boundary, spatial non-uniformities in the gas pressure, or both. △ Less

Submitted 7 August, 2024; originally announced August 2024.

Theoretical analysis of stress perturbations from a partially-lubricated viscous gravity current

Authors: Joshua H. Rines, Ching-Yao Lai, Yongji Wang

Abstract: We present a theoretical investigation into the dynamics of a viscous gravity current subjected to spatially-finite lubrication (i.e., a `slippery patch'). The work is motivated by grounded ice sheets flowing across patches of basal meltwater which reduce the ice-bed frictional coupling, causing perturbations enhancing ice motion, with implications for increased ice flux into the ocean and sea lev… ▽ More We present a theoretical investigation into the dynamics of a viscous gravity current subjected to spatially-finite lubrication (i.e., a `slippery patch'). The work is motivated by grounded ice sheets flowing across patches of basal meltwater which reduce the ice-bed frictional coupling, causing perturbations enhancing ice motion, with implications for increased ice flux into the ocean and sea level rise. The flow is characterized by transitions between shear- and extension-dominated dynamics, which necessitates boundary-layer solutions at the transition points. We develop a depth-integrated analytical model of Newtonian flow which concisely reveals fundamental relationships between ice sheet geometry (thickness, surface slope, and slippery patch length) and the magnitude and spatial extent of resulting horizontal deviatoric stresses. This reduced-order analytical model shows good quantitative agreement with numerical simulations using 2-D Newtonian Stokes equations, which are further extended to the case of a non-Newtonian flow. From the reduced-order model, we rationalize that the slippery patch-induced stress perturbations are exponentially-decaying functions of distance upstream away from the patch onset. We also show that the amplitude of the perturbation scales linearly with the surface slope and patch length while the decay lengthscale scales linearly with ice thickness. These fundamental relationships have implications for the response of the Greenland Ice Sheet to the inland expansion of basal meltwater presence over the coming warming decades. △ Less

Submitted 30 July, 2024; originally announced July 2024.

Photocathode characterisation for robust PICOSEC Micromegas precise-timing detectors

Authors: M. Lisowska, R. Aleksan, Y. Angelis, S. Aune, J. Bortfeldt, F. Brunbauer, M. Brunoldi, E. Chatzianagnostou, J. Datta, K. Dehmelt, G. Fanourakis, S. Ferry, D. Fiorina, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, K. Gnanvo, F. J. Iguaz, D. Janssens, A. Kallitsopoulou, M. Kovacic, B. Kross, C. C. Lai, P. Legou , et al. (33 additional authors not shown)

Abstract: The PICOSEC Micromegas detector is a~precise-timing gaseous detector based on a~Cherenkov radiator coupled with a~semi-transparent photocathode and a~Micromegas amplifying structure, targeting a~time resolution of tens of picoseconds for minimum ionising particles. Initial single-pad prototypes have demonstrated a~time resolution below 25 ps, prompting ongoing developments to adapt the concept for… ▽ More The PICOSEC Micromegas detector is a~precise-timing gaseous detector based on a~Cherenkov radiator coupled with a~semi-transparent photocathode and a~Micromegas amplifying structure, targeting a~time resolution of tens of picoseconds for minimum ionising particles. Initial single-pad prototypes have demonstrated a~time resolution below 25 ps, prompting ongoing developments to adapt the concept for High Energy Physics applications, where sub-nanosecond precision is essential for event separation, improved track reconstruction and particle identification. The achieved performance is being transferred to robust multi-channel detector modules suitable for large-area detection systems requiring excellent timing precision. To enhance the robustness and stability of the PICOSEC Micromegas detector, research on robust carbon-based photocathodes, including Diamond-Like Carbon (DLC) and Boron Carbide (B4C), is pursued. Results from prototypes equipped with DLC and B4C photocathodes exhibited a~time resolution of approximately 32 ps and 34.5 ps, respectively. Efforts dedicated to improve detector robustness and stability enhance the feasibility of the PICOSEC Micromegas concept for large experiments, ensuring sustained performance while maintaining excellent timing precision. △ Less

Submitted 9 December, 2024; v1 submitted 13 July, 2024; originally announced July 2024.

$\mathcal{PT}$-Symmetry induced Bi-Stability in Non-Hermitian Cavity Magnomechanics

Authors: Chaoyi Lai, Shah Fahad, Kashif Ammar Yasir

Abstract: We study the steady-state non-Hermitian magnomechanical system driven by a transverse magnetic field directly interacting with YIG sphere and excites cavity magnons and photons. To make the system non-Hermitian, we use a traveling field directly interacting with magnons generating gain to the system. We start by illustrating PT-configuration of the system, which contains two PT broken region aroun… ▽ More We study the steady-state non-Hermitian magnomechanical system driven by a transverse magnetic field directly interacting with YIG sphere and excites cavity magnons and photons. To make the system non-Hermitian, we use a traveling field directly interacting with magnons generating gain to the system. We start by illustrating PT-configuration of the system, which contains two PT broken region around exceptional point and PT protected region along the axis of exceptional point. Late, we discover that the numbers of cavity photons and magnons show bistable behavior depending upon the PT configuration, which becomes more significant as the values of the magnon-photon coupling and traveling field strength increases. We illustrate that steady-state photon only shows bistable behavior when the system in in lossy PT broken configuration, means strength of traveling field is less than the magnon-photon coupling. Otherwise, it will just contain a single stable state because of bistability suppression with gain in the system, which is unlike with any other investigation in this direction. Further, a larger magnon-photon coupling increases photon intensity and decreases magnon intensity, because of photon and magnon energy exchange, leading to enhanced photon bistablity and decreased magnon bistability. However, in case of increasing strength of traveling field, both photon as well as magnon bistability is appeared to be decreasing. We also study the steady-state effective potential of the system and illustrate the occurrence of bistability with nonlinear interactions between contour trajectories, which similarly depends on the PT broken configuration of the system. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Comments: 10 pages, 6 figures

Machine learning for climate physics and simulations

Authors: Ching-Yao Lai, Pedram Hassanzadeh, Aditi Sheshadri, Maike Sonnewald, Raffaele Ferrari, Venkatramani Balaji

Abstract: We discuss the emerging advances and opportunities at the intersection of machine learning (ML) and climate physics, highlighting the use of ML techniques, including supervised, unsupervised, and equation discovery, to accelerate climate knowledge discoveries and simulations. We delineate two distinct yet complementary aspects: (1) ML for climate physics and (2) ML for climate simulations. While p… ▽ More We discuss the emerging advances and opportunities at the intersection of machine learning (ML) and climate physics, highlighting the use of ML techniques, including supervised, unsupervised, and equation discovery, to accelerate climate knowledge discoveries and simulations. We delineate two distinct yet complementary aspects: (1) ML for climate physics and (2) ML for climate simulations. While physics-free ML-based models, such as ML-based weather forecasting, have demonstrated success when data is abundant and stationary, the physics knowledge and interpretability of ML models become crucial in the small-data/non-stationary regime to ensure generalizability. Given the absence of observations, the long-term future climate falls into the small-data regime. Therefore, ML for climate physics holds a critical role in addressing the challenges of ML for climate simulations. We emphasize the need for collaboration among climate physics, ML theory, and numerical analysis to achieve reliable ML-based models for climate applications. △ Less

Submitted 17 August, 2024; v1 submitted 19 April, 2024; originally announced April 2024.

In-beam test results of an RPC-based module for position-sensitive neutron detectors with timing readout

Authors: G. Canezin, L. M. S. Margato, A. Morozov, A. Blanco, J. Saraiva, L. Lopes, P. Fonte, Chung Chuan Lai, Per-Olof Svensson, G. Markaj, Florian M. Piegsa

Abstract: Recently we have proposed a new concept of a thermal neutron detector based on resistive plate chambers and 10B4C solid neutron converters, enabling to readout with high resolution in both the 3D position of neutron capture and the neutron time of flight (ToF). In this paper, we report the results of the first beam tests conducted with a new neutron RPC detection module, coupled to the position re… ▽ More Recently we have proposed a new concept of a thermal neutron detector based on resistive plate chambers and 10B4C solid neutron converters, enabling to readout with high resolution in both the 3D position of neutron capture and the neutron time of flight (ToF). In this paper, we report the results of the first beam tests conducted with a new neutron RPC detection module, coupled to the position readout units of a new design. The main focus is on the measurements of the neutron ToF and identification of the converter layer where the neutron is captured, giving the position along the beam direction. △ Less

Submitted 23 February, 2024; originally announced February 2024.

Multi-Blade detector with VMM3a-ASIC-based readout: installation and commissioning at the reflectometer Amor at PSI

Authors: F. Piscitelli, F. Ghazi Moradi, F. S. Alves, M. J. Christensen, J. Hrivnak, A. Johansson, K. Fissum, C. C. Lai, A. Monera Martinez, D. Pfeiffer, E. Shahu, J. Stahn, P. O. Svensson

Abstract: The Multi-Blade (MB) Boron-10-based neutron detector is the chosen technology for three instruments at the European Spallation Source (ESS): the two ESS reflectometers, ESTIA and FREIA, and the Test Beam Line. A fourth MB detector has been built, installed and commissioned for the user operation of the reflectometer Amor at PSI (Switzerland). Amor can be considered a downscaled version of the ESS… ▽ More The Multi-Blade (MB) Boron-10-based neutron detector is the chosen technology for three instruments at the European Spallation Source (ESS): the two ESS reflectometers, ESTIA and FREIA, and the Test Beam Line. A fourth MB detector has been built, installed and commissioned for the user operation of the reflectometer Amor at PSI (Switzerland). Amor can be considered a downscaled version of the ESS reflectometer ESTIA. They are based on the same Selene guide concept, optimized for performing focusing reflectometry on small samples. The experience gained at Amor is invaluable for the future deployment of the MB detector at the ESS. This manuscript describes the MB detector construction and installation at Amor along with the readout electronics chain based on the VMM3a ASIC. The readout chain deployed at Amor is equivalent of that of the ESS, including the readout master module (RMM), event-formation-units (EFUs), Kafka, FileWriter and live visualisation tools. △ Less

Submitted 18 March, 2024; v1 submitted 13 February, 2024; originally announced February 2024.

Comments: 16 pages, 12 figures

Journal ref: 2024 JINST 19 P05010

On-Chip Stimulated Brillouin Scattering via Surface Acoustic Waves

Authors: Govert Neijts, Choon Kong Lai, Maren Kramer Riseng, Duk-Yong Choi, Kunlun Yan, David Marpaung, Stephen J. Madden, Benjamin J. Eggleton, Moritz Merklein

Abstract: Surface acoustic wave (SAW) devices are ubiquitously used for signal processing and filtering, as well as mechanical, chemical and biological sensing, and show promise as quantum transducers. However, nowadays most SAWs are excited and driven via electromechanical coupling and interdigital transducers (IDTs), limiting operation bandwidth and flexibility. Novel ways to coherently excite and detect… ▽ More Surface acoustic wave (SAW) devices are ubiquitously used for signal processing and filtering, as well as mechanical, chemical and biological sensing, and show promise as quantum transducers. However, nowadays most SAWs are excited and driven via electromechanical coupling and interdigital transducers (IDTs), limiting operation bandwidth and flexibility. Novel ways to coherently excite and detect SAWs all-optically interfaced with photonic integrated circuits are yet elusive. Backward Stimulated Brillouin scattering (SBS) provides strong coherent interactions between optical and acoustic waves in chip-scale waveguides, however, demonstrations have been limited to single longitudinal waves in the waveguide core. Here, we numerically model and experimentally demonstrate surface acoustic wave stimulated Brillouin scattering (SAW-SBS) on a photonic chip. We designed and fabricated tailored waveguides made out of GeAsSe glass that show good overlap between SAWs at 3.81 GHz and guided optical modes, without requiring a top cladding. We measure a 225 W$^{-1}$m$^{-1}$ Brillouin gain coefficient of the surface acoustic resonance and linewidth narrowing to 40 MHz. Experimentally accessing this new regime of stimulated Brillouin scattering opens the door for novel on-chip sensing and signal processing applications, strong Brillouin interactions in materials that do not provide sufficient acoustic guidance in the waveguide core as well as excitation of surface acoustic waves in non-piezoelectric materials. △ Less

Submitted 2 October, 2023; originally announced October 2023.

Comments: 7 pages, 4 figures

Journal ref: APL Photonics 1 October 2024; 9 (10): 106114

Soft matter physics of the ground beneath our feet

Authors: Anne Voigtländer, Morgane Houssais, Karol A. Bacik, Ian C. Bourg, Justin C. Burton, Karen E. Daniels, Sujit S. Datta, Emanuela Del Gado, Nakul S. Deshpande, Olivier Devauchelle, Behrooz Ferdowsi, Rachel Glade, Lucas Goehring, Ian J. Hewitt, Douglas Jerolmack, Ruben Juanes, Arshad Kudrolli, Ching-Yao Lai, Wei Li, Claire Masteller, Kavinda Nissanka, Allan M. Rubin, Howard A. Stone, Jenny Suckale, Nathalie M. Vriend , et al. (2 additional authors not shown)

Abstract: Inspired by presentations by the authors during a workshop organized at the Princeton Center for Theoretical Science (PCTS) in January 2022, we present a perspective on some of the outstanding questions related to the "physics of the ground beneath our feet." These identified challenges are intrinsically shared with the field of Soft Matter but also have unique aspects when the natural environment… ▽ More Inspired by presentations by the authors during a workshop organized at the Princeton Center for Theoretical Science (PCTS) in January 2022, we present a perspective on some of the outstanding questions related to the "physics of the ground beneath our feet." These identified challenges are intrinsically shared with the field of Soft Matter but also have unique aspects when the natural environment is studied. △ Less

Submitted 31 July, 2023; originally announced August 2023.

Comments: Perspective Paper, 30 pages, 15 figures

A Fuzzy Classification Framework to Identify Equivalent Atoms in Complex Materials and Molecules

Authors: King Chun Lai, Sebastian Matera, Christoph Scheurer, Karsten Reuter

Abstract: The nature of an atom in a bonded structure -- such as in molecules, in nanoparticles or solids, at surfaces or interfaces -- depends on its local atomic environment. In atomic-scale modeling and simulation, identifying groups of atoms with equivalent environments is a frequent task, to gain an understanding of the material function, to interpret experimental results or to simply restrict demandin… ▽ More The nature of an atom in a bonded structure -- such as in molecules, in nanoparticles or solids, at surfaces or interfaces -- depends on its local atomic environment. In atomic-scale modeling and simulation, identifying groups of atoms with equivalent environments is a frequent task, to gain an understanding of the material function, to interpret experimental results or to simply restrict demanding first-principles calculations. While routine, this task can often be challenging for complex molecules or non-ideal materials with breaks of symmetries or long-range order. To automatize this task, we here present a general machine-learning framework to identify groups of (nearly) equivalent atoms. The initial classification rests on the representation of the local atomic environment through a high-dimensional smooth overlap of atomic positions (SOAP) vector. Recognizing that not least thermal vibrations may lead to deviations from ideal positions, we then achieve a fuzzy classification by mean-shift clustering within a low-dimensional embedded representation of the SOAP points as obtained through multidimensional scaling. The performance of this classification framework is demonstrated for simple aromatic molecules and crystalline Pd surface examples. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: Accepted manuscript in Journal of Chemical Physics. Repositories of the package (DECAF): DOI:10.17617/3.U7VKBM or https://gitlab.mpcdf.mpg.de/klai/decaf

Provable Routing Analysis of Programmable Photonics

Authors: Zhengqi Gao, Xiangfeng Chen, Zhengxing Zhang, Chih-Yu Lai, Uttara Chakraborty, Wim Bogaerts, Duane S. Boning

Abstract: Programmable photonic integrated circuits (PPICs) are an emerging technology recently proposed as an alternative to custom-designed application-specific integrated photonics. Light routing is one of the most important functions that need to be realized on a PPIC. Previous literature has investigated the light routing problem from an algorithmic or experimental perspective, e.g., adopting graph the… ▽ More Programmable photonic integrated circuits (PPICs) are an emerging technology recently proposed as an alternative to custom-designed application-specific integrated photonics. Light routing is one of the most important functions that need to be realized on a PPIC. Previous literature has investigated the light routing problem from an algorithmic or experimental perspective, e.g., adopting graph theory to route an optical signal. In this paper, we also focus on the light routing problem, but from a complementary and theoretical perspective, to answer questions about what is possible to be routed. Specifically, we demonstrate that not all path lengths (defined as the number of tunable basic units that an optical signal traverses) can be realized on a square-mesh PPIC, and a rigorous realizability condition is proposed and proved. We further consider multi-path routing, where we provide an analytical expression on path length sum, upper bounds on path length mean/variance, and the maximum number of realizable paths. All of our conclusions are proven mathematically. Illustrative potential optical applications using our observations are also presented. △ Less

Submitted 21 June, 2023; originally announced June 2023.

Optimizing performance for on-chip SBS-based isolator

Authors: Choon Kong Lai, Moritz Merklein, Alvaro Casas Bedoya, Yang Liu, Stephen J. Madden, Christopher G. Poulton, Michael J. Steel, Benjamin J. Eggleton

Abstract: Non-reciprocal optical components such as isolators and circulators are crucial for preventing catastrophic back-reflection and controlling optical crosstalk in photonic systems. While non-reciprocal devices based on Brillouin intermodal transitions have been experimentally demonstrated in chip-scale platforms, harnessing such interactions has required a suspended waveguide structure, which is cha… ▽ More Non-reciprocal optical components such as isolators and circulators are crucial for preventing catastrophic back-reflection and controlling optical crosstalk in photonic systems. While non-reciprocal devices based on Brillouin intermodal transitions have been experimentally demonstrated in chip-scale platforms, harnessing such interactions has required a suspended waveguide structure, which is challenging to fabricate and is potentially less robust than a non-suspended structure, thereby limiting the design flexibility. In this paper, we numerically investigate the performance of a Brillouin-based isolation scheme in which a dual-pump-driven optoacoustic interaction is used to excite confined acoustic waves in a traditional ridge waveguide. We find that acoustic confinement, and therefore the amount of Brillouin-driven mode conversion, can be enhanced by selecting an appropriate optical mode pair and waveguide geometry of two arsenic based chalcogenide platforms. Further, we optimize the isolator design in its entirety, including the input couplers, mode filters, the Brillouin-active waveguide as well as the device fabrication tolerances. We predict such a device can achieve 30 dB isolation over a 38 nm bandwidth when 500 mW pump power is used; in the presence of a +/- 10 nm fabrication-induced width error, such isolation can be maintained over a 5-10 nm bandwidth. △ Less

Submitted 25 December, 2022; originally announced December 2022.

Double-GEM based thermal neutron detector prototype

Authors: L. A. Serra Filho, R. Felix dos Santos, G. G. A. de Souza, M. M. M. Paulino, F. A. Souza, M. Moralles, H. Natal da Luz, M. Bregant, M. G. Munhoz, Chung-Chuan Lai, Carina Höglund, Per-Olof Svensson, Linda Robinson, Richard Hall-Wilton

Abstract: The Helium-3 shortage and the growing interest in neutron science constitute a driving factor in developing new neutron detection technologies. In this work, we report the development of a double-GEM detector prototype that uses a $^{10}$B$_4$C layer as a neutron converter material. GEANT4 simulations were performed predicting an efficiency of 3.14(10) %, agreeing within 2.7 $σ$ with the experimen… ▽ More The Helium-3 shortage and the growing interest in neutron science constitute a driving factor in developing new neutron detection technologies. In this work, we report the development of a double-GEM detector prototype that uses a $^{10}$B$_4$C layer as a neutron converter material. GEANT4 simulations were performed predicting an efficiency of 3.14(10) %, agreeing within 2.7 $σ$ with the experimental and analytic detection efficiencies obtained by the detector when tested in a 41.8 meV thermal neutron beam. The detector is position sensitive, equipped with a 256+256 strip readout connected to resistive chains, and achieves a spatial resolution better than 3 mm. The gain stability over time was also measured with a fluctuation of about 0.2 %h$^{-1}$ of the signal amplitude. A simple data acquisition with only 5 electronic channels is sufficient to operate this detector. △ Less

Submitted 19 July, 2022; v1 submitted 14 May, 2022; originally announced May 2022.

Comments: Prepared for submission to JINST

Journal ref: JINST 17 P09018 (2022)

Sub-40nm Nanogratings Self-Organized in PVP-based Polymer Composite Film by Photoexcitation and Two Sequent Splitting under Femtosecond Laser Irradiation

Authors: Li-Yun Chen, Cheng-Cheng Guo, Ming-Ming Pan, Chen Lai, Yun-Xia Wang, Guo-Cai Liao, Zi-Wei Ma, Fan-Wei Zhang, Jagadeesh Suriyaprakash, Lijing Guo, Eser Akinoglu, Qiang Li, Li-Jun Wu

Abstract: Laser-induced periodic surface structures (LIPSSs) on various materials have been extensively investigated because of their wide applications. The combination of different materials allows for greater freedom in tailoring their functions and achieving responses not possible in a homogeneous material. By utilizing a femtosecond (fs) laser to irradiate the Fe-doped Polyvinyl Pyrrolidone (PVP) compos… ▽ More Laser-induced periodic surface structures (LIPSSs) on various materials have been extensively investigated because of their wide applications. The combination of different materials allows for greater freedom in tailoring their functions and achieving responses not possible in a homogeneous material. By utilizing a femtosecond (fs) laser to irradiate the Fe-doped Polyvinyl Pyrrolidone (PVP) composite film, highly regular ultrafine nanogratings (U-nanogratings) with a period as small as 35.0 ($\pm$ 2.0) nm can be self-organized on the surface with extremely high efficiency. The period of the U-nanogratings can be controlled by varying the scanning speed of the laser beam (deposited energy) and the thickness of the composite film. Based on the experimental, theoretical, and simulation results, we propose a two-step formation mechanism: composite film excitation and two sequent grating-splitting. The high photosensitivity and low glass transition temperature of the composite film facilitate the fabrication of the ultrafine nanostructures. The proposed design method for the composite material and fabrication process could not only provide a strategy for obtaining highly regular U-nanogratings, but also offer a platform to explore the interaction physics between ultra-short pulses and matter under extreme conditions. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Multitube monitors: a new-generation of neutron beam monitors

Authors: F. Lafont, D. Barkats, J-C. Buffet, S. Cuccaro, B. Guerard, C-C Lai, J. Marchal, J. Pentenero, N. Sartor, R. Hall-Wilton, K. Kanaki, L. Robinson, P O. Svensson

Abstract: With the renewal of many neutron science instruments and the commissioning of new neutron facilities, there is a rising demand for improved neutron beam monitoring systems with reduced beam perturbations and higher counting rate capability. Fission chambers are the most popular beam monitors; however, their use on some instruments may be prevented by the background generated by fast neutrons emitt… ▽ More With the renewal of many neutron science instruments and the commissioning of new neutron facilities, there is a rising demand for improved neutron beam monitoring systems with reduced beam perturbations and higher counting rate capability. Fission chambers are the most popular beam monitors; however, their use on some instruments may be prevented by the background generated by fast neutrons emitted during neutron captures in 235U and by neutrons scattered in the material of the fission chamber. Multitube detectors, on the other hand, offer a good alternative with minimum beam perturbations. The purpose of this paper is to report and analyse the results of the measurements performed with several Multitubes used for beam monitoring. We show that the transparency of Multitube beam monitors is 97.6 +/-0.4 %, and that their detection efficiency is uniform, with a deviation from the mean value < 0.7%. A counting rate reduction of 10% due to pile-up effects is measured at a rate of 550 kHz. In addition to neutron beam intensity monitoring, the Multitube can be configured for 1-dimensional or 2-dimensional localisation. We present the preliminary results of these additional functionalities. △ Less

Submitted 19 May, 2022; v1 submitted 3 February, 2022; originally announced February 2022.

Comments: 15 pages, 16 figures

Effect of substrate roughness and material selection on the microstructure of sputtering deposited boron carbide thin films

Authors: Chung-Chuan Lai, Robert Boyd, Per-Olof Svensson, Carina Höglund, Linda Robinson, Jens Birch, Richard Hall-Wilton

Abstract: Amorphous boron carbide (B4C) thin films are by far the most popular form for the neutron converting layers in the 10B-based neutron detectors, which are a rising trend in detector technologies in response to the increasing scarcity and price of 3He, the standard material for neutron detection. The microstructure of the B4C films is closely related to the important properties, e.g. density and adh… ▽ More Amorphous boron carbide (B4C) thin films are by far the most popular form for the neutron converting layers in the 10B-based neutron detectors, which are a rising trend in detector technologies in response to the increasing scarcity and price of 3He, the standard material for neutron detection. The microstructure of the B4C films is closely related to the important properties, e.g. density and adhesion, for the converting layers, which eventually affect the detection efficiency and the long-term stability of the detectors. To study the influence from substrates of different roughness and materials, the B4C films were deposited on polished Si substrates with Al, Ti, and Cu buffer layers and unpolished Si, Al, Ti, and Cu substrates by direct current magnetron sputtering at a substrate temperature of 623 K. The tapered columnar grains and nodular defects, generally observed in SEM images, indicated a strong shadowing effect where voids were introduced around the grains. The change in the grain size did not show a direct dependence to the substrate roughness, acquired from the surface profile, nor to the mass density of the films, obtained from reflectivity patterns. However, films with non-uniform size of columnar grains were deposited on substrates with high skewness, leading to a drop of mass density from ~95 % down to ~70 % of tabulated bulk density. On the other hand, similar microstructures and mass density were obtained from the films deposited on Al, Ti, and Cu of different roughness and good adhesion were observed from cross-cut adhesion tests, showing the reliability of sputtering deposited B4C films on common structural materials in neutron detectors. △ Less

Submitted 29 January, 2022; originally announced January 2022.

Comments: Available online at Surface & Coatings Technology

Asymptotic self-similar blow-up profile for three-dimensional axisymmetric Euler equations using neural networks

Authors: Yongji Wang, Ching-Yao Lai, Javier Gómez-Serrano, Tristan Buckmaster

Abstract: Whether there exist finite time blow-up solutions for the 2-D Boussinesq and the 3-D Euler equations are of fundamental importance to the field of fluid mechanics. We develop a new numerical framework, employing physics-informed neural networks (PINNs), that discover, for the first time, a smooth self-similar blow-up profile for both equations. The solution itself could form the basis of a future… ▽ More Whether there exist finite time blow-up solutions for the 2-D Boussinesq and the 3-D Euler equations are of fundamental importance to the field of fluid mechanics. We develop a new numerical framework, employing physics-informed neural networks (PINNs), that discover, for the first time, a smooth self-similar blow-up profile for both equations. The solution itself could form the basis of a future computer-assisted proof of blow-up for both equations. In addition, we demonstrate PINNs could be successfully applied to find unstable self-similar solutions to fluid equations by constructing the first example of an unstable self-similar solution to the Córdoba-Córdoba-Fontelos equation. We show that our numerical framework is both robust and adaptable to various other equations. △ Less

Submitted 7 May, 2023; v1 submitted 18 January, 2022; originally announced January 2022.

Comments: Main paper: 6 pages, 3 figures. Supplementary material: 15 pages, 12 figures. To appear in Physical Review Letters

uRANIA-V: an innovative solution for neutron detection in homeland security

Authors: R. Farinelli, I. Balossino, G. Bencivenni, G. Cibinetto, G. Felici, S. Fiore, I. Garzia, M. Gatta, M. Giovannetti, R. Hall-Wilton, C. C. Lai, L. Lavezzi, G. Mezzadri, G. Morello, E. Paoletti, G. Papalino, A. Pietropaolo, M. Pillon, M. Poli Lener, L. Robinson, M. Scodeggio, P. O. Svensson

Abstract: Detection of neutrons is becoming of the utmost importance, especially in the studies of radioactive waste and in homeland security applications. The crisis of 3He availability has required the development of innovative techniques. One solution is to develop light gas detectors for neutron counting to be used as portals for ports and airports. The neutron is converted on the Boron-coated cathode,… ▽ More Detection of neutrons is becoming of the utmost importance, especially in the studies of radioactive waste and in homeland security applications. The crisis of 3He availability has required the development of innovative techniques. One solution is to develop light gas detectors for neutron counting to be used as portals for ports and airports. The neutron is converted on the Boron-coated cathode, releasing a charged particle, whose passage can be identified by the gas detector. While several technologies have been deployed in the past, the project μRANIA-V ( μRwell Advanced Neutron Identification Apparatus) aims to detect thermal neutrons by means of the μRwell technology, an innovative gas detector. The goal is to produce tiles to operate as portals in homeland security or for radioactive waste management. The technological transfer towards the industry has started, thus the production can be cost-effective also owing to a construction process relatively easier compared to similar apparatus. By reading directly the signals from the amplification stage, the neutrons can be counted with simplified electronics further reducing the total cost. In this paper, the project will be described, with details on the μRwell technology and on the neutron counting, on the test beam performed, and on the future plans. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Comments: ANIMMA 2021 conference proceeding

Edge of chaos as a guiding principle for modern neural network training

Authors: Lin Zhang, Ling Feng, Kan Chen, Choy Heng Lai

Abstract: The success of deep neural networks in real-world problems has prompted many attempts to explain their training dynamics and generalization performance, but more guiding principles for the training of neural networks are still needed. Motivated by the edge of chaos principle behind the optimal performance of neural networks, we study the role of various hyperparameters in modern neural network tra… ▽ More The success of deep neural networks in real-world problems has prompted many attempts to explain their training dynamics and generalization performance, but more guiding principles for the training of neural networks are still needed. Motivated by the edge of chaos principle behind the optimal performance of neural networks, we study the role of various hyperparameters in modern neural network training algorithms in terms of the order-chaos phase diagram. In particular, we study a fully analytical feedforward neural network trained on the widely adopted Fashion-MNIST dataset, and study the dynamics associated with the hyperparameters in back-propagation during the training process. We find that for the basic algorithm of stochastic gradient descent with momentum, in the range around the commonly used hyperparameter values, clear scaling relations are present with respect to the training time during the ordered phase in the phase diagram, and the model's optimal generalization power at the edge of chaos is similar across different training parameter combinations. In the chaotic phase, the same scaling no longer exists. The scaling allows us to choose the training parameters to achieve faster training without sacrificing performance. In addition, we find that the commonly used model regularization method - weight decay - effectively pushes the model towards the ordered phase to achieve better performance. Leveraging on this fact and the scaling relations in the other hyperparameters, we derived a principled guideline for hyperparameter determination, such that the model can achieve optimal performance by saturating it at the edge of chaos. Demonstrated on this simple neural network model and training algorithm, our work improves the understanding of neural network training dynamics, and can potentially be extended to guiding principles of more complex model architectures and algorithms. △ Less

Submitted 20 July, 2021; originally announced July 2021.

CO$_2$-driven diffusiophoresis for removal of bacteria

Authors: Suin Shim, Sepideh Khodaparast, Ching-Yao Lai, Jing Yan, Jesse T. Ault, Bhargav Rallabandi, Orest Shardt, Howard A. Stone

Abstract: We investigate CO$_2$-driven diffusiophoresis of colloidal particles and bacterial cells in a Hele-Shaw geometry. Combining experiments and a model, we understand the characteristic length and time scales of CO$_2$-driven diffusiophoresis in relation to system dimensions and CO$_2$ diffusivity. Directional migration of wild-type V. cholerae and a mutant lacking flagella, as well as S. aureus and P… ▽ More We investigate CO$_2$-driven diffusiophoresis of colloidal particles and bacterial cells in a Hele-Shaw geometry. Combining experiments and a model, we understand the characteristic length and time scales of CO$_2$-driven diffusiophoresis in relation to system dimensions and CO$_2$ diffusivity. Directional migration of wild-type V. cholerae and a mutant lacking flagella, as well as S. aureus and P. aeruginosa, near a dissolving CO$_2$ source shows that diffusiophoresis of bacteria is achieved independent of cell shape and Gram stain. Long-time experiments suggest possible applications for bacterial diffusiophoresis to cleaning systems or anti-biofouling surfaces. △ Less

Submitted 14 September, 2020; originally announced September 2020.

Time- and energy-resolved effects in the boron-10 based Multi-Grid and helium-3 based thermal neutron detectors

Authors: A. Backis, A. Khaplanov, R. Al Jebali, R. Ammer, I. Apostolidis, J. Birch, C. -C. Lai, P. P. Deen, M. Etxegarai, N. de Ruette, J. Freita Ramos, D. F. Förster, E. Haettner, R. Hall-Wilton, D. Hamilton, C. Höglund, P. M. Kadletz, K. Kanaki, E. Karnickis, O. Kirstein, S. Kolya, Z. Kraujalyte, A. Laloni, K. Livingston, O. Löhman , et al. (11 additional authors not shown)

Abstract: The boron-10 based Multi-Grid detector is being developed as an alternative to helium-3 based neutron detectors. At the European Spallation Source, the detector will be used for time-of-flight neutron spectroscopy at cold to thermal neutron energies. The objective of this work is to investigate fine time- and energy-resolved effects of the Multi-Grid detector, down to a few $μ$eV, while comparing… ▽ More The boron-10 based Multi-Grid detector is being developed as an alternative to helium-3 based neutron detectors. At the European Spallation Source, the detector will be used for time-of-flight neutron spectroscopy at cold to thermal neutron energies. The objective of this work is to investigate fine time- and energy-resolved effects of the Multi-Grid detector, down to a few $μ$eV, while comparing it to the performance of a typical helium-3 tube. Furthermore, it is to characterize differences between the detector technologies in terms of internal scattering, as well as the time reconstruction of ~ $μ$s short neutron pulses. The data were taken at the Helmholtz Zentrum Berlin, where the Multi-Grid detector and a helium-3 tube were installed at the ESS test beamline, V20. Using a Fermi-chopper, the neutron beam of the reactor was chopped into a few tens of $μ$s wide pulses before reaching the detector, located a few tens of cm downstream. The data of the measurements show an agreement between the derived and calculated neutron detection efficiency curve. The data also provide fine details on the effect of internal scattering, and how it can be reduced. For the first time, the chopper resolution was comparable to the timing resolution of the Multi-Grid detector. This allowed a detailed study of time- and energy resolved effects, as well as a comparison with a typical helium-3 tube. △ Less

Submitted 14 January, 2021; v1 submitted 2 June, 2020; originally announced June 2020.

Comments: 37 pages, 21 figures

Journal ref: Meas. Sci. Technol. 32 035903 (2021)

u-RANIA: a neutron detector based on μ-RWELL technology

Authors: I. Balossino, G. Bencivenni, P. Bielowka, G. Cibinetto, R. Farinelli, G. Felici, I. Garzia, M. Gatta, P. Giacomelli, M. Giovannetti, R. Hall Wilton, C. -C. Lai, L. Lavezzi, F. Messi, G. Mezzadri, G. Morello, M. Pinamonti, M. Poli Lener, L. Robinson, M. Scodeggio, P. -O. Svensson

Abstract: In the framework of the ATTRACT-uRANIA project, funded by the European Community, we are developing an innovative neutron imaging detector based on micro-Resistive WELL ($μ$ -RWELL) technology. The $μ$ -RWELL, based on the resistive detector concept, ensuring an efficient spark quenching mechanism, is a highly reliable device. It is composed by two main elements: a readout-PCB and a cathode. The a… ▽ More In the framework of the ATTRACT-uRANIA project, funded by the European Community, we are developing an innovative neutron imaging detector based on micro-Resistive WELL ($μ$ -RWELL) technology. The $μ$ -RWELL, based on the resistive detector concept, ensuring an efficient spark quenching mechanism, is a highly reliable device. It is composed by two main elements: a readout-PCB and a cathode. The amplification stage for this device is embedded in the readout board through a resistive layer realized by means of an industrial process with DLC (Diamond-Like Carbon). A thin layer of B$_4$C on the copper surface of the cathode allows the thermal neutrons detection through the release of $^7$Li and $α$ particles in the active volume. This technology has been developed to be an efficient and convenient alternative to the $^3$He shortage. The goal of the project is to prove the feasibility of such a novel neutron detector by developing and testing small planar prototypes with readout boards suitably segmented with strip or pad read out, equipped with existing electronics or readout in current mode. Preliminary results from the test with different prototypes, showing a good agreement with the simulation, will be presented together with construction details of the prototypes and the future steps of the project. △ Less

Submitted 17 August, 2020; v1 submitted 13 May, 2020; originally announced May 2020.

Comments: Prepared for the INSTR20 Conference Proceeding for JINST

Evidence for spontaneous arrangement of two-way flow in water bridge via particle image velocimetry

Authors: Ping-Rui Tsai, Hong-Yue Huang, Cheng-Wei Lai, Yu-Ting Cheng, Chih-Yung Huang, Cheng-En Tsai, Yi-Chun Lee, Hong Hao, Tzay-Ming Hong

Abstract: By revisiting the century-old problem of water bridge, we demonstrate that it is in fact dynamic and comprises of two coaxial water currents that carry different charges and flow in opposite directions. This spontaneous separation is triggered by the different stages to construct the water bridge. Initially, a flow is facilitated by the cone jet that is powered by H+ and flows out of the positive-… ▽ More By revisiting the century-old problem of water bridge, we demonstrate that it is in fact dynamic and comprises of two coaxial water currents that carry different charges and flow in opposite directions. This spontaneous separation is triggered by the different stages to construct the water bridge. Initially, a flow is facilitated by the cone jet that is powered by H+ and flows out of the positive-electrode beaker. An opposing cone-jet from negative beaker is established later and forced to take the outer route. This spontaneous arrangement of two-way flow is revealed by using fluorescein and carbon powder as tracers, and the Particle Image Velocimetry, These two opposing flows are found to carry non-equal flux that results in a net transport of water to the negative beaker. We manage to estimate the flow speed and cross-sectional area of these co-axial flows as a function of time and applied voltage. Note that the water on the outer layer functions as a millimeter tube that confines and interacts strongly with the flow inside. This provides a first natural and yet counter example to the recently reported near-frictionless flow in an equally miniatureized soft wall made from ferrofluid. △ Less

Submitted 25 July, 2023; v1 submitted 10 April, 2020; originally announced April 2020.

Comments: 6 pages, 5 figures

Multi-Functional Variable Thickness Structure for Broadband and Omnidirectional Focusing and Collimation

Authors: Liuxian Zhao, Changquan Lai, Miao Yu

Abstract: Luneburg lens is a symmetric gradient-index lens with a refractive index that increases from the outer surface to the center in a radial manner. It has the ability to focus and collimate waves, which makes it useful for energy harvesting, waveguiding and as a component in transducers. An ideal Luneburg lens should be easy to fabricate, has broadband and omnidirectional characteristics, as well as… ▽ More Luneburg lens is a symmetric gradient-index lens with a refractive index that increases from the outer surface to the center in a radial manner. It has the ability to focus and collimate waves, which makes it useful for energy harvesting, waveguiding and as a component in transducers. An ideal Luneburg lens should be easy to fabricate, has broadband and omnidirectional characteristics, as well as a focal length that can be easily tuned. However, existing structural Luneburg lenses based on phononic crystals can hardly achieve these requirements. Here, we propose an alternative structural Luneburg lens which has a refractive index that varies smoothly with its radial distance as a result of a changing thickness. Theoretical calculations, numerical simulations and experimental measurements of flexural wave propagation through the lens showed that flexural wave focusing can be obtained inside, at the edge and outside of the variable thickness lens for different frequencies and propagation directions. Flexural wave collimation was also demonstrated when a point source was placed at the respective focal points for each lens. Furthermore, it was shown that flexural waves that were focused onto a piezoelectric energy harvester by the Luneburg lens can lead to a significant increase in the harvested voltage compared to that obtained without focusing. △ Less

Submitted 20 February, 2020; originally announced February 2020.

The Multi-Blade Boron-10-based neutron detector performance using a focusing reflectometer

Authors: G. Mauri, I. Apostolidis, M. J. Christensen, A. Glavic, C. C. Lai, A. Laloni, F. Messi, A. Lindh Olsson, L. Robinson, J. Stahn, P. O. Svensson, R. Hall-Wilton, F. Piscitelli

Abstract: The Multi-Blade is a Boron-10-based neutron detector designed for neutron reflectometers and developed for the two instruments (Estia and FREIA) planned for the European Spallation Source in Sweden. A reflectometry demonstrator has been installed at the AMOR reflectometer at the Paul Scherrer Institut (PSI - Switzerland). The setup exploits the Selene guide concept and it can be considered a scale… ▽ More The Multi-Blade is a Boron-10-based neutron detector designed for neutron reflectometers and developed for the two instruments (Estia and FREIA) planned for the European Spallation Source in Sweden. A reflectometry demonstrator has been installed at the AMOR reflectometer at the Paul Scherrer Institut (PSI - Switzerland). The setup exploits the Selene guide concept and it can be considered a scaled-down demonstrator of Estia. The results of these tests are discussed. It will be shown how the characteristics of the Multi-Blade detector are features that allow the focusing reflectometry operation mode. Additionally the performance of the Multi-Blade, in terms of rate capability, exceeds current state-of-the-art technology. The improvements with respect to the previous prototypes are also highlighted; from background considerations to the linear and angular uniformity response of the detector. △ Less

Submitted 9 January, 2020; originally announced January 2020.

Comments: 32 pages, 28 figures

Journal ref: Journal of Instrumentation 15, P03010, (2020)

Zero-field spin-orbit-torque switching driven by magnetic spin Hall effect

Authors: Po-Hung Lin, Po-Wei Lee, Yu-Hsuan Lin, Bo-Yuan Yang, Vinod Kumar, Hsiu-Hau Lin, Chih-Huang Lai

Abstract: Spin Hall effect plays an essential role in generating spin current from the injected charge current, following the Dyakonov-Perel rule that the directions of charge flow, spin flow and spin polarization are mutually perpendicular to each other. Recently, its generalization from an antiferromagnet, so-called magnetic spin Hall effect, has been studied and verified by measuring anomalous spin accum… ▽ More Spin Hall effect plays an essential role in generating spin current from the injected charge current, following the Dyakonov-Perel rule that the directions of charge flow, spin flow and spin polarization are mutually perpendicular to each other. Recently, its generalization from an antiferromagnet, so-called magnetic spin Hall effect, has been studied and verified by measuring anomalous spin accumulations. Here, we investigate the magnetic spin Hall effect in bilayer materials made of a heavy metal and an antiferromagnet. The spin current generated by the magnetic spin Hall effect accomplishes spin-orbit-torque switching for ferromagnetic magnetization and exchange bias concurrently without any external magnetic field. The switching mechanism crucially relies on the non-collinear spin texture in the antiferromagnet, capable of generating symmetry-breaking components in the spin-current tensor so that the external magnetic field is no longer necessary. The zero-field concurrent switching of magnetization and exchange bias is a significant technological breakthrough. Furthermore, our findings pave the way to explore the magnetic spin Hall effects in various spin textures through spin-orbit-torque switching. △ Less

Submitted 5 November, 2019; originally announced November 2019.

Propagation of Uncertainty in a Rotating Pipe Mechanism to Generate an Impinging Swirling Jet Flow for Heat Transfer from a Flat Plate

Authors: F. -J. Granados-Ortiz, J. Ortega-Casanova, C. -H. Lai

Abstract: In Computational Fluid Dynamics (CFD) studies composed of the coupling of different simulations, the uncertainty in one stage may be propagated to the following stage and affect the accuracy of the prediction. In this paper, a framework for uncertainty quantification is applied to the two-step simulation of the mechanical design of a swirling jet flow generated by a rotating pipe (\textit{Simulati… ▽ More In Computational Fluid Dynamics (CFD) studies composed of the coupling of different simulations, the uncertainty in one stage may be propagated to the following stage and affect the accuracy of the prediction. In this paper, a framework for uncertainty quantification is applied to the two-step simulation of the mechanical design of a swirling jet flow generated by a rotating pipe (\textit{Simulation 1}) impinging on a flat plate to provide convective heat transfer (\textit{Simulation 2}). The first approach is the Stochastic Collocation Method (SCM) with Clenshaw-Curtis sparse grids. The conclusion drawn from the analysis is that the simulated system does not exhibit a significant sensitivity to stochastic variations of model input parameters, over the tested uncertainty ranges. Additionally, a set of non-linear regression models for the stochastic velocity and turbulent profiles for the pipe nozzle are created and tested, since impinging jets at Reynolds number of $Re=23000$ are very frequent in the literature, but stochastic inlet conditions have never been provided. Numerical results demonstrate a negligible difference in the predicted convective heat transfer with respect to the use of the profiles simulated via CFD. These suggested surrogate models can be directly embedded onto other CFD applications (e.g arrays of jets or jet flows impinging on plates with different shapes) in which a realistic swirling flow under uncertainty can be of interest. △ Less

Submitted 27 October, 2019; originally announced October 2019.

Turbulence statistics in a negatively buoyant multiphase plume

Authors: Ankur D. Bordoloi, Chris C. K. Lai, Laura K. Clark, Gerardo Veliz, Evan Variano

Abstract: We investigate the turbulence statistics in a {multiphase plume made of heavy particles (particle Reynolds number at terminal velocity is 450)}. Using refractive-index-matched stereoscopic particle image velocimetry, we measure the locations of particles {whose buoyancy drives the formation of a multiphase plume,} {together with the local velocity of the induced flow in the ambient salt-water}. {M… ▽ More We investigate the turbulence statistics in a {multiphase plume made of heavy particles (particle Reynolds number at terminal velocity is 450)}. Using refractive-index-matched stereoscopic particle image velocimetry, we measure the locations of particles {whose buoyancy drives the formation of a multiphase plume,} {together with the local velocity of the induced flow in the ambient salt-water}. {Measurements in the plume centerplane exhibit self-similarity in mean flow characteristics consistent with classic integral plume theories.} The turbulence characteristics resemble those measured in a bubble plume, {including strong anisotropy in the normal Reynolds stresses. However, we observe structural differences between the two multiphase plumes. First, the skewness of the probability density function (PDF) of the axial velocity fluctuations is not that which would be predicted by simply reversing the direction of a bubble plume. Second, in contrast to a bubble plume, the particle plume has a non-negligible fluid-shear production term in the turbulent kinetic energy (TKE) budget. Third, the radial decay of all measured terms in the TKE budget is slower than those in a bubble plume.} Despite these dissimilarities, a bigger picture emerges that applies to both flows. The TKE production by particles (or bubbles) roughly balances the viscous dissipation, except near the plume centerline. The one-dimensional power-spectra of the velocity fluctuations show a -3 power-law that puts both the particle and bubble plume in a category different from single-phase shear-flow turbulence. △ Less

Submitted 18 July, 2019; originally announced July 2019.

Journal ref: J. Fluid Mech. 896 (2020) A19

An immersed boundary method for fluid--structure--acoustics interactions involving large deformations and complex geometries

Authors: Li Wang, Fang-Bao Tian, Joseph C. S. Lai

Abstract: This paper presents an immersed boundary (IB) method for fluid--structure--acoustics interactions involving large deformations and complex geometries. In this method, the fluid dynamics is solved by a finite difference method where the temporal, viscous and convective terms are respectively discretized by the third-order Runge-Kutta scheme, the fourth-order central difference scheme and a fifth-or… ▽ More This paper presents an immersed boundary (IB) method for fluid--structure--acoustics interactions involving large deformations and complex geometries. In this method, the fluid dynamics is solved by a finite difference method where the temporal, viscous and convective terms are respectively discretized by the third-order Runge-Kutta scheme, the fourth-order central difference scheme and a fifth-order W/TENO (Weighted/Targeted Essentially Non-oscillation) scheme. Without loss of generality, a nonlinear flexible plate is considered here, and is solved by a finite element method based on the absolute nodal coordinate formulation. The no-slip boundary condition at the fluid--structure interface is achieved by using a diffusion-interface penalty IB method. With the above proposed method, the aeroacoustics field generated by the moving boundaries and the associated flows are inherently solved. In order to validate and verify the current method, several benchmark cases are conducted: acoustic waves scattered from a stationary cylinder in a quiescent flow, sound generation by a stationary and a rotating cylinder in a uniform flow, sound generation by an insect in hovering flight, deformation of a red blood cell induced by acoustic waves and acoustic waves scattered by a stationary sphere. The comparison of the sound scattered by a cylinder shows that the present IB--WENO scheme, a simple approach, has an excellent performance which is even better than the implicit IB--lattice Boltzmann method. For the sound scattered by a sphere, the IB--TENO scheme has a lower dissipation compared with the IB--WENO scheme. Applications of this technique to model fluid-structure-acoustics interactions of flapping foils mimicking an insect wing section during forward flight and flapping foil energy harvester are also presented, considering the effects of foil shape and flexibility. △ Less

Submitted 1 May, 2019; originally announced May 2019.

Production and Integration of the ATLAS Insertable B-Layer

Authors: B. Abbott, J. Albert, F. Alberti, M. Alex, G. Alimonti, S. Alkire, P. Allport, S. Altenheiner, L. Ancu, E. Anderssen, A. Andreani, A. Andreazza, B. Axen, J. Arguin, M. Backhaus, G. Balbi, J. Ballansat, M. Barbero, G. Barbier, A. Bassalat, R. Bates, P. Baudin, M. Battaglia, T. Beau, R. Beccherle , et al. (352 additional authors not shown)

Abstract: During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i… ▽ More During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector. △ Less

Submitted 6 June, 2018; v1 submitted 2 March, 2018; originally announced March 2018.

Comments: 90 pages in total. Author list: ATLAS IBL Collaboration, starting page 2. 69 figures, 20 tables. Published in Journal of Instrumentation. All figures available at: https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PLOTS/PIX-2018-001

Journal ref: Journal of Instrumentation JINST 13 T05008 (2018)

Spin-orbit-torque MRAM: from uniaxial to unidirectional switching

Authors: Ming-Han Tsai, Po-Hung Lin, Kuo-Feng Huang, Hsiu-Hau Lin, Chih-Huang Lai

Abstract: With ultra-fast writing capacity and high reliability, the spin-orbit torque is regarded as a promising alternative to fabricate next-generation magnetic random access memory. However, the three-terminal setup can be challenging when scaling down the cell size. In particular, the thermal stability is an important issue. Here we demonstrate that the current-pulse-induced perpendicular exchange bias… ▽ More With ultra-fast writing capacity and high reliability, the spin-orbit torque is regarded as a promising alternative to fabricate next-generation magnetic random access memory. However, the three-terminal setup can be challenging when scaling down the cell size. In particular, the thermal stability is an important issue. Here we demonstrate that the current-pulse-induced perpendicular exchange bias can significantly relieve the concern of thermal stability. The switching of the exchange bias direction is induced by the spin-orbit torque when passing current pulses through the Pt/Co system with an inserted IrMn antiferromagnetic layer. Manipulating the current-pulse-induced exchange bias, spin-orbit-torque switching at zero field between states with unidirectional anisotropy is achieved and the thermal agitation of the magnetic moment is strongly suppressed. The spin-orbit torque mechanism provides an innovative method to generate and to control the exchange bias by electrical means, which enables us to realize the new switching mechanism of highly stable perpendicular memory cells. △ Less

Submitted 6 June, 2017; originally announced June 2017.

Recoil-sensitive lithium interferometer without a subrecoil sample

Authors: Kayleigh Cassella, Eric Copenhaver, Brian Estey, Yanying Feng, Chen Lai, Holger Müller

Abstract: We report simultaneous conjugate Ramsey-Bordé interferometers with a sample of low-mass (lithium-7) atoms at 50 times the recoil temperature. We optically pump the atoms to a magnetically insensitive state using the $2S_{1/2} - 2P_{1/2}$ line. Fast stimulated Raman beam splitters address a broad velocity class and unavoidably drive two conjugate interferometers that overlap spatially. We show that… ▽ More We report simultaneous conjugate Ramsey-Bordé interferometers with a sample of low-mass (lithium-7) atoms at 50 times the recoil temperature. We optically pump the atoms to a magnetically insensitive state using the $2S_{1/2} - 2P_{1/2}$ line. Fast stimulated Raman beam splitters address a broad velocity class and unavoidably drive two conjugate interferometers that overlap spatially. We show that detecting the summed interference signals of both interferometers, using state labeling, allows recoil measurements and suppression of phase noise from vibrations. The use of "warm" atoms allows for simple, efficient, and high-flux atom sources and broadens the applicability of recoil-sensitive interferometry to particles that remain difficult to trap and cool. △ Less

Submitted 7 April, 2017; v1 submitted 24 October, 2016; originally announced October 2016.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. Lett. 118, 233201 (2017)

Critical Transitions in Public Opinion: A Case Study of American Presidential Election

Authors: Ning Ning Chung, Lock Yue Chew, Choy Heng Lai

Abstract: At the tipping point, it is known that small incident can trigger dramatic societal shift. Getting early-warning signals for such changes are valuable to avoid detrimental outcomes such as riots or collapses of nations. However, it is notoriously hard to capture the processes of such transitions in the real-world. Here, we demonstrate the occurrence of a major shift in public opinion in the form o… ▽ More At the tipping point, it is known that small incident can trigger dramatic societal shift. Getting early-warning signals for such changes are valuable to avoid detrimental outcomes such as riots or collapses of nations. However, it is notoriously hard to capture the processes of such transitions in the real-world. Here, we demonstrate the occurrence of a major shift in public opinion in the form of political support. Instead of simple swapping of ruling parties, we study the regime shift of a party popularity based on its attractiveness by examining the American presidential elections during 1980-2012. A single irreversible transition is detected in 1991. Once a transition happens, recovery to the original level of attractiveness does not bring popularity of the political party back. Remarkably, this transition is corroborated by tell-tale early-warning signature of critical slowing down. Our approach is applicable to shifts in public attitude within any social system. △ Less

Submitted 18 October, 2016; originally announced October 2016.

High spatial frequency periodic structures induced on ferric ion-doped Polyvinyl Pyrrolidone film by femtosecond laser pulses

Authors: Chen Lai, Guocai Liao, Yunxia Wang, Qiang Li, Lijun Wu

Abstract: Utilizing continues-wave or pulsed laser to induce nano-structures on various material surfaces is one significant method in nano-fabrication technology. In this report, we investigate the formation of high spatial frequency periodic structures on Polyvinyl Pyrrolidone (PVP) film by a linearly polarized femtosecond laser. Ferric (Fe) ions are introduced into the film to improve the photosensitivit… ▽ More Utilizing continues-wave or pulsed laser to induce nano-structures on various material surfaces is one significant method in nano-fabrication technology. In this report, we investigate the formation of high spatial frequency periodic structures on Polyvinyl Pyrrolidone (PVP) film by a linearly polarized femtosecond laser. Ferric (Fe) ions are introduced into the film to improve the photosensitivity. Regular nano-gratings with spatial periods at the range of 60-100nm, which are about one tenth of the irradiating wavelength, can be induced. The period direction of the nano-gratings is perpendicular to the polarization of the femtosecond laser. By tuning the laser energy and scanning speed, we find that the nano-gratings can be formed in a wide range of experimental parameters. As high laser energy can excite not only metals, but also semiconductors and polymers, we believe the formation of the nano-gratings is due to the interaction between the incident femtosecond laser and surface plasmons. The laser processable PVP-based materials and the induced nano-gratings will have potential applications in biophotonics and nanophotonics. △ Less

Submitted 28 February, 2016; originally announced February 2016.

Tunnel magnetoresistance in magnetic tunnel junctions with embedded nanoparticles

Authors: Arthur Useinov, Niazbeck Useinov, Lin-Xiu Ye, Te-Ho Wu, Chih-Huang Lai

Abstract: In this paper, we attempt the theoretical modeling of the magnetic tunnel junctions with embedded magnetic and nonmagnetic nanoparticles (NPs). A few abnormal tunnel magnetoresistance (TMR) effects, observed in related experiments, can be easily simulated within our model: we found, that the suppressed TMR magnitudes and the TMR sign-reversing effect at small voltages are related to the electron m… ▽ More In this paper, we attempt the theoretical modeling of the magnetic tunnel junctions with embedded magnetic and nonmagnetic nanoparticles (NPs). A few abnormal tunnel magnetoresistance (TMR) effects, observed in related experiments, can be easily simulated within our model: we found, that the suppressed TMR magnitudes and the TMR sign-reversing effect at small voltages are related to the electron momentum states of the NP located inside the insulating layer. All these TMR behaviors can be explained within the tunneling model, where NP is simulated as a quantum well (QW). The coherent (direct) double barrier tunneling is dominating over the single barrier one. The origin of the TMR suppression is the quantized angle transparency for spin polarized electrons being in one of the lowest QW states. The phenomenon was classified as the quantized conductance regime due to restricted geometry. △ Less

Submitted 23 November, 2015; originally announced November 2015.

Comments: 4 pages, 5 figures

Integrated Surface-enhanced Raman Spectroscopy chip based on liquid core waveguide

Authors: Chunhong Lai, Gang Chen, Li Chen, Junhui Li, Qinghao Liu, Yi Xu

Abstract: We propose an integrated surface enhanced Raman scattering (SERS) chip based on liquid-core waveguide with total reflection, through which the depression of leaky mode enable a long propagating distance. An Raman enhancement factor for rhodamine 6G of 2.5*105 is obtained, and a excellent repeatability is shown. The peaks in the SERS spectrum of DNA of silkworm clearly illustrate the information of… ▽ More We propose an integrated surface enhanced Raman scattering (SERS) chip based on liquid-core waveguide with total reflection, through which the depression of leaky mode enable a long propagating distance. An Raman enhancement factor for rhodamine 6G of 2.5*105 is obtained, and a excellent repeatability is shown. The peaks in the SERS spectrum of DNA of silkworm clearly illustrate the information of the molecule structure. The integration of the SERS substrate, micro-fluid, and liquid-core waveguide make such a SERS chip attractive for biochemical detection with high performance. △ Less

Submitted 6 December, 2015; v1 submitted 9 November, 2015; originally announced November 2015.

The Detector System of The Daya Bay Reactor Neutrino Experiment

Authors: F. P. An, J. Z. Bai, A. B. Balantekin, H. R. Band, D. Beavis, W. Beriguete, M. Bishai, S. Blyth, R. L. Brown, I. Butorov, D. Cao, G. F. Cao, J. Cao, R. Carr, W. R. Cen, W. T. Chan, Y. L. Chan, J. F. Chang, L. C. Chang, Y. Chang, C. Chasman, H. Y. Chen, H. S. Chen, M. J. Chen, Q. Y. Chen , et al. (310 additional authors not shown)

Abstract: The Daya Bay experiment was the first to report simultaneous measurements of reactor antineutrinos at multiple baselines leading to the discovery of $\barν_e$ oscillations over km-baselines. Subsequent data has provided the world's most precise measurement of $\rm{sin}^22θ_{13}$ and the effective mass splitting $Δm_{ee}^2$. The experiment is located in Daya Bay, China where the cluster of six nucl… ▽ More The Daya Bay experiment was the first to report simultaneous measurements of reactor antineutrinos at multiple baselines leading to the discovery of $\barν_e$ oscillations over km-baselines. Subsequent data has provided the world's most precise measurement of $\rm{sin}^22θ_{13}$ and the effective mass splitting $Δm_{ee}^2$. The experiment is located in Daya Bay, China where the cluster of six nuclear reactors is among the world's most prolific sources of electron antineutrinos. Multiple antineutrino detectors are deployed in three underground water pools at different distances from the reactor cores to search for deviations in the antineutrino rate and energy spectrum due to neutrino mixing. Instrumented with photomultiplier tubes (PMTs), the water pools serve as shielding against natural radioactivity from the surrounding rock and provide efficient muon tagging. Arrays of resistive plate chambers over the top of each pool provide additional muon detection. The antineutrino detectors were specifically designed for measurements of the antineutrino flux with minimal systematic uncertainty. Relative detector efficiencies between the near and far detectors are known to better than 0.2%. With the unblinding of the final two detectors' baselines and target masses, a complete description and comparison of the eight antineutrino detectors can now be presented. This paper describes the Daya Bay detector systems, consisting of eight antineutrino detectors in three instrumented water pools in three underground halls, and their operation through the first year of eight detector data-taking. △ Less

Submitted 7 January, 2016; v1 submitted 17 August, 2015; originally announced August 2015.

Comments: 52 pages, 51 figures

Journal ref: Nuclear Instruments and Methods A 811(2016) 133-161

Monte Carlo simulation of prompt gamma-ray spectra from depleted uranium under D-T neutron irradiation and electron recoil spectra in a liquid scintillator detector

Authors: Jianguo Qin, Caifeng Lai, Rong Liu, Tonghua Zhu, Xinwei Zhang, Bangjiao Ye

Abstract: To overcome the problem of inefficient computing time and unreliable results in MCNP5 calculation, a two-step method is adopted to calculate the energy deposition of prompt gamma-rays in detectors for depleted uranium spherical shells under D-T neutrons irradiation. In the first step, the gamma-ray spectrum for energy below 7 MeV is calculated by MCNP5 code; secondly, the electron recoil spectrum… ▽ More To overcome the problem of inefficient computing time and unreliable results in MCNP5 calculation, a two-step method is adopted to calculate the energy deposition of prompt gamma-rays in detectors for depleted uranium spherical shells under D-T neutrons irradiation. In the first step, the gamma-ray spectrum for energy below 7 MeV is calculated by MCNP5 code; secondly, the electron recoil spectrum in a BC501A liquid scintillator detector is simulated based on EGSnrc Monte Carlo Code with the gamma-ray spectrum from the first step as input. The comparison of calculated results with experimental ones shows that the simulations agree well with experiment in the energy region 0.4-3 MeV for the prompt gamma-ray spectrum and below 4 MeVee for the electron recoil spectrum. The reliability of the two-step method in this work is validated. △ Less

Submitted 13 July, 2015; originally announced July 2015.

Comments: 9 pages, 8 figures, 1 table

Method for measuring prompt gamma-rays generated by D-T neutrons bombarding a depleted uranium spherical shell

Authors: Jianguo Qin, Caifeng Lai, Li Jiang, Rong Liu, Xinwei Zhang, Bangjiao Ye, Tonghua Zhu

Abstract: The prompt gamma-ray spectrum from depleted uranium (DU) spherical shells induced by 14 MeV D-T neutrons is measured. Monte Carlo (MC) simulation gives the largest prompt gamma flux with the optimal thickness of the DU spherical shells 3-5 cm and the optimal frequency of neutron pulse 1 MHz. The method of time of flight and pulse shape coincidence with energy (DC-TOF) is proposed, and the subtract… ▽ More The prompt gamma-ray spectrum from depleted uranium (DU) spherical shells induced by 14 MeV D-T neutrons is measured. Monte Carlo (MC) simulation gives the largest prompt gamma flux with the optimal thickness of the DU spherical shells 3-5 cm and the optimal frequency of neutron pulse 1 MHz. The method of time of flight and pulse shape coincidence with energy (DC-TOF) is proposed, and the subtraction of the background gamma-rays discussed in detail. The electron recoil spectrum and time spectrum of the prompt gamma-rays are obtained based on a 2"*2" BC501A liquid scintillator detector. The energy spectrum and time spectrum of prompt gamma-rays are obtained based on an iterative unfolding method that can remove the influence of γ-rays response matrix and pulsed neutron shape. The measured time spectrum and the calculated results are roughly consistent with each other. Experimental prompt gamma-ray spectrum in the 0.4-3 MeV energy region agree well with MC simulation based on the ENDF/BVI.5 library, and the discrepancies for the integral quantities of gamma-rays of energy 0.4-1 MeV and 1-3 MeV are 9.2% and 1.1%, respectively. △ Less

Submitted 13 July, 2015; originally announced July 2015.

Comments: 17 pages, 12 figures, 5 tables

Spin splitting in 2D monochalcogenide semiconductors

Authors: Dat T. Do, Subhendra D. Mahanti, Chih Wei Lai

Abstract: We report ab initio calculations of the spin splitting of the uppermost valence band (UVB) and the lowermost conduction band (LCB) in bulk and atomically thin GaS, GaSe, GaTe, and InSe. These layered monochalcogenides appear in four major polytypes depending on the stacking order, except for the monoclinic GaTe. Bulk and few-layer $ε$- and $γ$-type, and odd-number $β$-type GaS, GaSe, and InSe crys… ▽ More We report ab initio calculations of the spin splitting of the uppermost valence band (UVB) and the lowermost conduction band (LCB) in bulk and atomically thin GaS, GaSe, GaTe, and InSe. These layered monochalcogenides appear in four major polytypes depending on the stacking order, except for the monoclinic GaTe. Bulk and few-layer $ε$- and $γ$-type, and odd-number $β$-type GaS, GaSe, and InSe crystals are noncentrosymmetric. The spin splittings of the UVB and the LCB near the $Γ$-point in the Brillouin zone are finite, but still smaller than those in a zinc-blende semiconductor such as GaAs. On the other hand, the spin splitting is zero in centrosymmetric bulk and even-number few-layer $β$-type GaS, GaSe, and InSe, owing to the constraint of spatial inversion symmetry. By contrast, GaTe exhibits zero spin splitting because it is centrosymmetric down to a single layer. In these monochalcogenide semiconductors, the separation of the non-degenerate conduction and valence bands from adjacent bands results in the suppression of Elliot-Yafet spin relaxation mechanism. Therefore, the electron- and hole-spin relaxation times in these systems with zero or minimal spin splittings are expected to exceed those in GaAs when the D'yakonov-Perel' spin relaxation mechanism is also suppressed. △ Less

Submitted 4 June, 2015; v1 submitted 2 April, 2015; originally announced April 2015.

Comments: 7 pages, 5 figures

Journal ref: Scientific Reports 5, 17044 (2015)

Transient dual-energy lasing in a semiconductor microcavity

Authors: Feng-Kuo Hsu, Wei Xie, Yi-Shan Lee, Sheng-Di Lin, Chih-Wei Lai

Abstract: We demonstrate sequential lasing at two well-separated energies in a highly photoexcited planar microcavity at room temperature. Two spatially overlapped lasing states with distinct polarization properties appear at energies more than 5 meV apart. Under a circularly polarized nonresonant 2 ps pulse excitation, a sub-10-ps transient circularly polarized high-energy (HE) state emerges within 10 ps a… ▽ More We demonstrate sequential lasing at two well-separated energies in a highly photoexcited planar microcavity at room temperature. Two spatially overlapped lasing states with distinct polarization properties appear at energies more than 5 meV apart. Under a circularly polarized nonresonant 2 ps pulse excitation, a sub-10-ps transient circularly polarized high-energy (HE) state emerges within 10 ps after the pulse excitation. This HE state is followed by a pulsed state that lasts for 20--50 ps at a low energy (LE) state. The HE state is highly circularly polarized as a result of a spin-preserving stimulated process, while the LE state shows a significantly reduced circular polarization because of a diminishing spin imbalance. △ Less

Submitted 31 March, 2015; originally announced April 2015.

Comments: 5 pages, 4 figures

Journal ref: Scientific Reports 5, 15347 (2015)

Linearly polarized remote-edge luminescence in GaSe nanoslabs

Authors: Yanhao Tang, Wei Xie, Krishna C. Mandal, John A. McGuire, Chih-Wei Lai

Abstract: We report highly linearly polarized remote luminescence that emerges at the cleaved edges of nanoscale gallium selenide slabs tens of micrometers away from the optical excitation spot. The remote-edge luminescence (REL) measured in the reflection geometry has a degree of linear polarization above 0.90, with polarization orientation pointing toward the photoexcitation spot. The REL is dominated by… ▽ More We report highly linearly polarized remote luminescence that emerges at the cleaved edges of nanoscale gallium selenide slabs tens of micrometers away from the optical excitation spot. The remote-edge luminescence (REL) measured in the reflection geometry has a degree of linear polarization above 0.90, with polarization orientation pointing toward the photoexcitation spot. The REL is dominated by an index-guided optical mode that is linearly polarized along the crystalline $c$-axis. This luminescence is from out-of-plane dipoles that are converted from in-plane dipoles through a spin-flip process at the excitation spot. △ Less

Submitted 21 February, 2015; originally announced February 2015.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. Applied 4, 034008 (2015)

Multiple-pulse lasing from an optically induced harmonic confinement in a highly photoexcited microcavity

Authors: Wei Xie, Feng-Kuo Hsu, Yi-Shan Lee, Sheng-Di Lin, Chih Wei Lai

Abstract: We report the observation of macroscopic harmonic states in an optically induced confinement in a highly photoexcited semiconductor microcavity at room temperature. The spatially photomodulated refractive index changes result in the visualization of harmonic states in a micrometer-scale optical potential at quantized energies up to 4 meV even in the weak-coupling plasma limit. We characterize the… ▽ More We report the observation of macroscopic harmonic states in an optically induced confinement in a highly photoexcited semiconductor microcavity at room temperature. The spatially photomodulated refractive index changes result in the visualization of harmonic states in a micrometer-scale optical potential at quantized energies up to 4 meV even in the weak-coupling plasma limit. We characterize the time evolution of the harmonic states directly from the consequent pulse radiation and identify sequential multiple $\sim$10 ps pulse lasing with different emitting angles and frequencies. △ Less

Submitted 21 July, 2015; v1 submitted 30 January, 2015; originally announced February 2015.

Comments: 5 pages, 4 figures, and Supplemental Material ( 7 supplementary figures, materials and methods, and theoretical modeling)

Journal ref: Optica 3, 1477-1482 (2016)

Spin-polarized lasing in a highly photoexcited semiconductor microcavity

Authors: Feng-kuo Hsu, Wei Xie, Yi-Shan Lee, Sheng-Di Lin, Chih-Wei Lai

Abstract: We demonstrate room-temperature spin-polarized ultrafast ($\sim$10 ps) lasing in a highly optically excited GaAs microcavity. This microcavity is embedded with InGaAs multiple quantum wells in which the spin relaxation time is less than 10 ps. The laser radiation remains highly circularly polarized even when excited by nonresonant elliptically polarized light. The lasing energy is not locked to th… ▽ More We demonstrate room-temperature spin-polarized ultrafast ($\sim$10 ps) lasing in a highly optically excited GaAs microcavity. This microcavity is embedded with InGaAs multiple quantum wells in which the spin relaxation time is less than 10 ps. The laser radiation remains highly circularly polarized even when excited by nonresonant elliptically polarized light. The lasing energy is not locked to the bare cavity resonance, and shifts $\sim$10 meV as a function of the photoexcited density. Such spin-polarized lasing is attributed to a spin-dependent stimulated process of correlated electron-hole pairs. These pairs are formed near the Fermi edge in a high-density electron-hole plasma coupled to the cavity light field. △ Less

Submitted 8 April, 2015; v1 submitted 30 January, 2015; originally announced February 2015.

Comments: 15 pages, 10 figures

Journal ref: Phy. Rev. B 91, 195312 (2015)