-
Tailoring Heat Transfer at Silica-Water Interfaces via Hydroxyl and Methyl Surface Groups
Authors:
Viktor Mandrolko,
Konstantinos Termentzidis,
David Lacroix,
Mykola Isaiev
Abstract:
Efficient thermal transport across solid-liquid interfaces is essential for optimizing heat dissipation in modern technological applications. This study employs molecular dynamics (MD) simulations to investigate the impact of surface functionalization on heat transfer at the silica/water interface. It has been shown that the surface functionalization changes significantly the wetting characteristi…
▽ More
Efficient thermal transport across solid-liquid interfaces is essential for optimizing heat dissipation in modern technological applications. This study employs molecular dynamics (MD) simulations to investigate the impact of surface functionalization on heat transfer at the silica/water interface. It has been shown that the surface functionalization changes significantly the wetting characteristics of silica surface: from one hand hydroxyl groups render such surfaces more hydrophilic, while methyl groups more hydrophobic. Here, we reveal that modifying the surface functionalization from methylated to hydroxylated groups results in: (i) up to an approximately eightfold increase in adhesion energy, (ii) a reorientation of interfacial water molecules to align perpendicular to the surface normal, (iii) a reduction in the liquid depletion length near the interface, and (iv) an overall enhancement of interfacial heat conduction. We quantify interfacial thermal resistance through the calculation of the contribution of each functional group to the total heat flux, providing insights into the physical mechanisms governing heat transfer at functionalized interfaces. We demonstrated that manipulation of the concentrations of the functional groups can be used to tailor interfacial thermal transport.
△ Less
Submitted 5 May, 2025; v1 submitted 2 May, 2025;
originally announced May 2025.
-
Spectral Mechanisms of Solid/Liquid Interfacial Heat Transfer in the Presence of a Meniscus
Authors:
Abdullah El-Rifai,
Liudmyla Klochko,
Sreehari Perumanath,
David Lacroix,
Rohit Pillai,
Mykola Isaiev
Abstract:
In this study, we employ molecular simulations to investigate the enhancement in thermal conductance at the solid/liquid interface in the presence of a meniscus reported previously (Klochko et al., Phys. Chem. Chem. Phys. 25(4):3298-3308, 2023). We vary the solid/liquid interaction strength at Lennard-Jones interfaces for both confined liquid and meniscus systems, finding that the presence of a me…
▽ More
In this study, we employ molecular simulations to investigate the enhancement in thermal conductance at the solid/liquid interface in the presence of a meniscus reported previously (Klochko et al., Phys. Chem. Chem. Phys. 25(4):3298-3308, 2023). We vary the solid/liquid interaction strength at Lennard-Jones interfaces for both confined liquid and meniscus systems, finding that the presence of a meniscus yields an enhancement in the interfacial thermal conductance across all wettabilities. However, the magnitude of the enhancement is found to depend on the surface wettability, initially rising monotonously for low to moderate wettabilities, followed by a sharp rise between moderate and high wettabilities. The spectral decomposition of heat flux formalism was applied to understand the nature of this phenomenon further. By computing the in-plane and out-of-plane components of the heat fluxes within both the interfacial solid and liquid, we show that the initial monotonous rise in conductance enhancement predominantly stems from a rise in the coupling of out-of-plane vibrations within both the solid and the liquid. In contrast, the subsequent sharp rise at more wetting interfaces is linked to sharp increases in the utilization of the in-plane modes of the solid and liquid. These observations result from the interplay between the solid/liquid adhesive forces and the liquid/vapor interfacial tension. Our results can aid engineers in optimizing thermal transport at realistic interfaces, which is critical to designing effective cooling solutions for electronics, among other applications.
△ Less
Submitted 22 August, 2024;
originally announced August 2024.
-
Features of the Contact Angle Hysteresis at the Nanoscale: A Molecular Dynamics Insight
Authors:
Viktor Mandrolko,
Guillaume Castanet,
Sergii Burian,
Yaroslav Grosu,
Liudmyla Klochko,
David Lacroix,
Mykola Isaiev
Abstract:
Understanding the physics of a three-phase contact line between gas, liquid, and solid is important for numerous applications. At the macroscale, the three-phase contact line response to an external force action is often characterized by a contact angle hysteresis, and several models are presented in the literature for its description. Yet, there is still a need for more information about such mod…
▽ More
Understanding the physics of a three-phase contact line between gas, liquid, and solid is important for numerous applications. At the macroscale, the three-phase contact line response to an external force action is often characterized by a contact angle hysteresis, and several models are presented in the literature for its description. Yet, there is still a need for more information about such model applications at the nanoscale. In this study, a molecular dynamics approach was used to investigate the shape of a liquid droplet under an external force for different wetting regimes. In addition, an analytic model for describing the droplet shape was developed. It gives us the possibility to evaluate the receding and advancing wetting angle accurately. With our modeling, we found that the interplay between capillary forces and viscous forces is crucial to characterize the droplet shape at the nanoscale. In this frame, the importance of the rolling movement of the interface between liquid and vapor was pointed out. We also demonstrate that in the range of the external forces when capillary forces are most significant compared to others, hysteresis is well described by the macroscale Cox-Voinov model.
△ Less
Submitted 19 November, 2024; v1 submitted 26 September, 2023;
originally announced September 2023.
-
Thermal Transport Properties of Nanoporous Silicon with Significant Specific Surface Area
Authors:
Mykola Isaiev,
Yuliia Mankovska,
Vasyl Kuryliuk,
David Lacroix
Abstract:
This paper studies thermal transport in nanoporous silicon with a significant specific surface area. First, the equilibrium molecular dynamics approach was used to obtain the dependence of thermal conductivity on a specific surface area. Then, a modified phonon transport kinetic theory-based approach was developed to analyze thermal conductivity. Two models were used to evaluate the phonon mean fr…
▽ More
This paper studies thermal transport in nanoporous silicon with a significant specific surface area. First, the equilibrium molecular dynamics approach was used to obtain the dependence of thermal conductivity on a specific surface area. Then, a modified phonon transport kinetic theory-based approach was developed to analyze thermal conductivity. Two models were used to evaluate the phonon mean free path in the porous materials. The first model approximates the dependence of the mean free path only with the specific surface area, and the second one investigates the dependence of the mean free path variation with the porosity in the peculiar case of a highly porous matrix. Both models approximate molecular dynamics data well for the smaller porosity values, while the first model fails for large porosities. The second model matches well with molecular dynamics simulations for all considered ranges of the porosities. This work illustrates that the phonon mean free path dependence with the porosity/volume fraction of composite materials is essential for describing thermal transport in systems with significant surface-to-volume fractions.
△ Less
Submitted 28 February, 2023; v1 submitted 27 February, 2023;
originally announced February 2023.
-
Thermal transport properties of the nanocomposite system "porous silicon/ionic liquid"
Authors:
Pavlo Lishchuk,
Alina Vashchuk,
Sergiy Rogalsky,
Lesia Chepela,
Mykola Borovyi,
David Lacroix,
Mykola Isaiev
Abstract:
This paper investigates thermal transport in a nanocomposite system "porous silicon matrix filled with ionic liquid". First, the thermal conductivity and heat capacity of two imidazolium and one ammonium ionic liquids were evaluated using the photoacoustic approach in piezoelectric configuration and differential scanning calorimetry, respectively. Then, the thermal transport properties of the comp…
▽ More
This paper investigates thermal transport in a nanocomposite system "porous silicon matrix filled with ionic liquid". First, the thermal conductivity and heat capacity of two imidazolium and one ammonium ionic liquids were evaluated using the photoacoustic approach in piezoelectric configuration and differential scanning calorimetry, respectively. Then, the thermal transport properties of the composite system "ionic liquid confined inside porous silicon matrix" were investigated with the photoacoustic approach in gas-microphone configuration. It was found that a significant enhancement of the thermal conductivity of the composite when compared to the individual components, i.e. (i) more than two times for pristine porous silicon and (ii) more than eight times for ionic liquids. These results provide new paths for innovative solutions in the field of thermal management in highly efficient energy storage devices.
△ Less
Submitted 13 December, 2022; v1 submitted 12 December, 2022;
originally announced December 2022.
-
Thermophysical properties of n-hexadecane: Combined Molecular Dynamics and experimental investigations
Authors:
L. Klochko,
J. Noel,
N. R. Sgreva,
S. Leclerc,
C. Métivier,
D. Lacroix,
M. Isaiev
Abstract:
Investigating properties of phase change materials (PCMs) is an important issue due to their extensive use in heat storage systems and thermal regulation devices. Improvement of the efficiency of such systems should be based on a better knowledge of the microscopic mechanisms governing the thermal and rheological characteristics of PCMs. This may be accomplished by the use of molecular simulations…
▽ More
Investigating properties of phase change materials (PCMs) is an important issue due to their extensive use in heat storage systems and thermal regulation devices. Improvement of the efficiency of such systems should be based on a better knowledge of the microscopic mechanisms governing the thermal and rheological characteristics of PCMs. This may be accomplished by the use of molecular simulations of the aforementioned quantities and their linkage with macroscale investigations. In this work, we studied thermophysical properties of $n$-hexadecane for different temperatures regimes using molecular dynamics (MD) and carry out several experimental measurements. Particularly, we focused on the evaluation of various rheological and thermal properties such as thermal conductivity, $κ$, viscosity, $η$, diffusion coefficient, $D$, and heat capacities $C_p$ and $C_v$. Special attention was paid to the comparison of the results of simulations with experimental ones.
△ Less
Submitted 15 July, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Molecular dynamics simulation of thermal transport across solid/liquid interface created by meniscus
Authors:
Liudmyla Klochko,
Viktor Mandrolko,
Guillaume Castanet,
Gilles Pernot,
Fabrice Lemoine,
Konstantinos Termentzidis,
David Lacroix,
Mykola Isaiev
Abstract:
Understandings heat transfer across a solid/liquid interface is important to develop new pathways to improve thermal management in various energy applications. One of the important questions that arises in this context is the impact of three-phase contact line between solid, liquid and gas on the perturbations of the heat fluxes at the nanoscale. Therefore, this paper is devoted to the investigati…
▽ More
Understandings heat transfer across a solid/liquid interface is important to develop new pathways to improve thermal management in various energy applications. One of the important questions that arises in this context is the impact of three-phase contact line between solid, liquid and gas on the perturbations of the heat fluxes at the nanoscale. Therefore, this paper is devoted to the investigations of features of thermal transport across nanosized meniscus constrained between two solid walls. Different wetting states of the meniscus were considered with molecular dynamics approach by the variation of the interactional potential between atoms of the substrate and the liquid. The effect of the size of the meniscus on the exchange of energy between two solid walls was also investigated. It was shown that the presence of a three phase contact line leads to a decrease of the interfacial boundary resistance between solid and liquid. Further, investigations with the finite element method were used to link atomistic simulations with the continuum mechanics. We demonstrate that the wetting angle and the interfacial boundary resistance are the required key-parameters to perform multiscale simulations of such engineering problems with an accurate microscale parametrization.
△ Less
Submitted 22 October, 2021;
originally announced October 2021.
-
Thermal properties study of silicon nanostructures by photoacoustic techniques
Authors:
K. Dubyk,
T. Nychyporuk,
V. Lysenko,
K. Termentzidis,
G. Castanet,
F. Lemoine,
D. Lacroix,
Mykola Isaiev
Abstract:
The photoacoustic method with piezoelectric detection for the simultaneous evaluation of the thermophysical properties is proposed. The approach is based on the settling of an additional heat sink for redistribution of heat fluxes deposited on the sample surface. Firstly, the approach was tested on the porous silicon with well-defined morphology and well-studied properties. Then, heat capacity and…
▽ More
The photoacoustic method with piezoelectric detection for the simultaneous evaluation of the thermophysical properties is proposed. The approach is based on the settling of an additional heat sink for redistribution of heat fluxes deposited on the sample surface. Firstly, the approach was tested on the porous silicon with well-defined morphology and well-studied properties. Then, heat capacity and thermal conductivity of silicon nanowires arrays have been investigated by recovering the experimental data through numerical simulations. The decrease of heat capacity and effective thermal conductivity of the samples upon increasing thickness and porosity of the sample is observed. Such behavior could be caused by the increase of the structure heterogeneity. In particular, this can be related to larger disorder (increased density of broken nanowires and larger porosity) that appears during the etching process of the thick layers.
△ Less
Submitted 2 December, 2020;
originally announced December 2020.
-
Frequency domain measurements of thermal properties using 3omega-Scanning Thermal Microscope in a vacuum environment
Authors:
Gilles Pernot,
Anas Metjari,
Hadrien Chaynes,
Mathieu Weber,
Mykola Isaiev,
David Lacroix
Abstract:
Material thermal properties characterization at nanoscales remains a challenge even if progresses were done in developing specific characterization techniques like the Scanning Thermal Microscopy (SThM). In the present work, we propose a detailed procedure based on the combined use of a SThM probe characterization and its Finite Element Modeling (FEM) to recover in-operando 3omega measurements ach…
▽ More
Material thermal properties characterization at nanoscales remains a challenge even if progresses were done in developing specific characterization techniques like the Scanning Thermal Microscopy (SThM). In the present work, we propose a detailed procedure based on the combined use of a SThM probe characterization and its Finite Element Modeling (FEM) to recover in-operando 3omega measurements achieved under high vacuum. This approach is based on a two-step methodology: (i) a fine description of the probe s electrical and frequency behaviors in out of contact mode to determine intrinsic parameters of the SThM tip, (b) a minimization of the free parameter of our model, i.e. the contact thermal resistance, by comparing 3omega measurements to our simulations of the probe operating in contact mode. Such an approach allows us to accurately measure thermal interface resistances of the probe as a function of the strength applied between the tip and the surface for three different materials (silicon, silica and gold). In addition, FEM modeling provides insights about the 3omega-SThM technique sensitivity, as a function of probe / sample interface resistance to measure material thermal conductivity, paving the way to quantitative SThM measurements.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
Impact of the initial fluctuations on the dissipative dynamics of interacting Fermi systems: A model case study
Authors:
Ibrahim Ulgen,
Bulent Yilmaz,
Denis Lacroix
Abstract:
Standard methods used for computing the dynamics of a quantum many-body system are the mean-field (MF) approximations such as the time-dependent Hartree-Fock (TDHF) approach. Even though MF approaches are quite successful, they suffer some well-known shortcomings, one of which is insufficient dissipation of collective motion. The stochastic mean-field approach (SMF), where a set of MF trajectories…
▽ More
Standard methods used for computing the dynamics of a quantum many-body system are the mean-field (MF) approximations such as the time-dependent Hartree-Fock (TDHF) approach. Even though MF approaches are quite successful, they suffer some well-known shortcomings, one of which is insufficient dissipation of collective motion. The stochastic mean-field approach (SMF), where a set of MF trajectories with random initial conditions are considered, is a good candidate to include dissipative effects beyond mean field. In this approach, the one-body density matrix elements are treated initially as a set of stochastic Gaussian c numbers that are adjusted to reproduce first and second moments of collective one-body observables. It is shown that the predictive power of the SMF approach can be further improved by relaxing the Gaussian assumption for the initial probabilities. More precisely, using Gaussian or uniform distributions for the matrix elements generally leads to overdamping for long times, whereas distributions with smaller kurtosis lead to much better reproduction of the long time evolution.
△ Less
Submitted 7 November, 2019; v1 submitted 15 August, 2019;
originally announced August 2019.
-
Features of photothermal transformation in porous silicon based multilayered structures
Authors:
K. Dubyk,
L. Chepela,
P. Lishchuk,
A. Belarouci,
D. Lacroix,
M. Isaiev
Abstract:
This paper is devoted to the study of photothermal transformations in multilayered structures. As a modelled sample, porous silicon with a periodic distribution of the porosity was chosen. The spatial distribution of the optical properties inside the structure was evaluated under Brugmann approximation. The heat sources arising as a result of electromagnetic radiation absorption in the structure w…
▽ More
This paper is devoted to the study of photothermal transformations in multilayered structures. As a modelled sample, porous silicon with a periodic distribution of the porosity was chosen. The spatial distribution of the optical properties inside the structure was evaluated under Brugmann approximation. The heat sources arising as a result of electromagnetic radiation absorption in the structure were estimated by solving Maxwell equations. This allowed us to calculate temperature profiles inside photo-excited sample. For experimental measurements, photoacoustic set-up with a gas-microphone transduction system was chosen to investigate thermal properties of the structure. The results of the photoacoustic response simulation based on the gas-piston model demonstrated an excellent agreement with experiments. This allows a reliable evaluation of the thermal conductivity by fitting the experimental amplitude-frequency photoacoustic signal with the simulated one.
△ Less
Submitted 10 July, 2019; v1 submitted 5 July, 2019;
originally announced July 2019.
-
Thermal conductivity of strained silicon: molecular dynamics insight and kinetic theory approach
Authors:
Vasyl Kuryliuk,
Oleksii Nepochatyi,
Patrice Chantrenne,
David Lacroix,
Mykola Isaiev
Abstract:
In this work, we investigated tensile and compression forces effect on the thermal conductivity of silicon. We used equilibrium molecular dynamics approach for the evaluation of thermal conductivity considering different interatomic potentials. More specifically, we tested Stillinger-Weber, Tersoff, Environment-Dependent Interatomic Potential and Modified Embedded Atom Method potentials for the de…
▽ More
In this work, we investigated tensile and compression forces effect on the thermal conductivity of silicon. We used equilibrium molecular dynamics approach for the evaluation of thermal conductivity considering different interatomic potentials. More specifically, we tested Stillinger-Weber, Tersoff, Environment-Dependent Interatomic Potential and Modified Embedded Atom Method potentials for the description of silicon atom motion under different strain and temperature conditions. Additionally, we extracted phonon density of states and dispersion curves from molecular dynamics simulations. These data were used for direct calculations of thermal conductivity considering the kinetic theory approach. Comparison of molecular dynamics and kinetic theory simulations results as a function of strain and temperature allowed us to investigate the different factors affecting the thermal conductivity of strained silicon.
△ Less
Submitted 1 August, 2019; v1 submitted 23 April, 2019;
originally announced April 2019.
-
Thermal conductivity of disordered porous membranes
Authors:
Marianna Sledzinska,
Bartlomiej Graczykowski,
Francesc Alzina,
Umberto Melia,
Konstantinos Termentzidis,
David Lacroix,
Clivia M. Sotomayor Torres
Abstract:
We report measurements and Monte Carlo simulations of thermal conductivity of porous 100nm- thick silicon membranes, in which size, shape and position of the pores were varied randomly. Measurements using 2-laser Raman thermometry on both plain membrane and porous membranes revealed more than 10-fold reduction of thermal conductivity compared to bulk silicon and six-fold reduction compared to non-…
▽ More
We report measurements and Monte Carlo simulations of thermal conductivity of porous 100nm- thick silicon membranes, in which size, shape and position of the pores were varied randomly. Measurements using 2-laser Raman thermometry on both plain membrane and porous membranes revealed more than 10-fold reduction of thermal conductivity compared to bulk silicon and six-fold reduction compared to non-patterned membrane for the sample with 37% filling fraction. Using Monte Carlo solution of the Boltzmann transport equation for phonons we compared different possibilities of pore organization and its influence on the thermal conductivity of the samples. The simulations confirmed that the strongest reduction of thermal conductivity is achieved for a distribution of pores with arbitrary shapes that partly overlap. Up to 15% reduction of thermal conductivity with respect to the purely circular pores was predicted for a porous membrane with 37% filling fraction. The effect of pore shape, distribution and surface roughness is further discussed.
△ Less
Submitted 2 October, 2018;
originally announced October 2018.
-
Modeling semi-conductor thermal properties. The dispersion role
Authors:
Damian Terris,
Karl Joulain,
David Lacroix,
Denis Lemonnier
Abstract:
We study heat transport in semiconductor nanostructures by solving the Boltzmann Transport Equation (BTE) by means of the Discrete Ordinate Method (DOM). Relaxation time and phase and group velocitiy spectral dependencies are taken into account. The Holland model of phonon relaxation time is revisited and recalculated from dispersion relations (taken in litterature) in order to match bulk silico…
▽ More
We study heat transport in semiconductor nanostructures by solving the Boltzmann Transport Equation (BTE) by means of the Discrete Ordinate Method (DOM). Relaxation time and phase and group velocitiy spectral dependencies are taken into account. The Holland model of phonon relaxation time is revisited and recalculated from dispersion relations (taken in litterature) in order to match bulk silicon and germanium values. This improved model is then used to predict silicon nanowire and nanofilm thermal properties in both ballistic and mesoscopic regimes.
△ Less
Submitted 27 March, 2008;
originally announced March 2008.
-
Monte Carlo transient phonons transport in silicon and germanium at nanoscales
Authors:
David Lacroix,
Karl Joulain
Abstract:
Heat transport at nanoscales in semiconductors is investigated with a statistical method. The Boltzmann Transport Equation (BTE) which characterize phonons motion and interaction within the crystal lattice has been simulated with a Monte Carlo technique. Our model takes into account media frequency properties through the dispersion curves for longitudinal and transverse acoustic branches. The BT…
▽ More
Heat transport at nanoscales in semiconductors is investigated with a statistical method. The Boltzmann Transport Equation (BTE) which characterize phonons motion and interaction within the crystal lattice has been simulated with a Monte Carlo technique. Our model takes into account media frequency properties through the dispersion curves for longitudinal and transverse acoustic branches. The BTE collisional term involving phonons scattering processes is simulated with the Relaxation Times Approximation theory. A new distribution function accounting for the collisional processes has been developed in order to respect energy conservation during phonons scattering events. This non deterministic approach provides satisfactory results in what concerns phonons transport in both ballistic and diffusion regimes. The simulation code has been tested with silicon and germanium thin films; temperature propagation within samples is presented and compared to analytical solutions (in the diffusion regime). The two materials bulk thermal conductivity is retrieved for temperature ranging between 100 K and 500 K. Heat transfer within a plane wall with a large thermal gradient (250 K-500 K) is proposed in order to expose the model ability to simulate conductivity thermal dependence on heat exchange at nanoscales. Finally, size effects and validity of heat conduction law are investigated for several slab thicknesses.
△ Less
Submitted 11 April, 2005;
originally announced April 2005.
