-
Basal layer of granular flow down smooth and rough inclines: kinematics, slip laws and rheology
Authors:
Teng Wang,
Lu Jing,
Fiona C. Y. Kwok,
Yuri D. Sobral,
Thomas Weinhart,
Anthony R. Thornton
Abstract:
Granular flow down an inclined plane is ubiquitous in geophysical and industrial applications. On rough inclines, the flow exhibits Bagnold's velocity profile and follows the so-called $μ(I)$ local rheology. On insufficiently rough or smooth inclines, however, velocity slip occurs at the bottom and a basal layer with strong agitation emerges below the bulk, which is not predicted by the local rheo…
▽ More
Granular flow down an inclined plane is ubiquitous in geophysical and industrial applications. On rough inclines, the flow exhibits Bagnold's velocity profile and follows the so-called $μ(I)$ local rheology. On insufficiently rough or smooth inclines, however, velocity slip occurs at the bottom and a basal layer with strong agitation emerges below the bulk, which is not predicted by the local rheology. Here, we use discrete element method simulations to study detailed dynamics of the basal layer in granular flows down both smooth and rough inclines. We control the roughness via a dimensionless parameter, $R_a$, varied systematically from 0 (flat, frictional plane) to near 1 (very rough plane). Three flow regimes are identified: a slip regime ($R_a \lesssim 0.45$) where a dilated basal layer appears, a no-slip regime ($R_a \gtrsim 0.6$) and an intermediate transition regime. In the slip regime, the kinematics profiles (velocity, shear rate and granular temperature) of the basal layer strongly deviate from Bagnold's profiles. General basal slip laws are developed which express the slip velocity as a function of the local shear rate (or granular temperature), base roughness and slope angle. Moreover, the basal layer thickness is insensitive to flow conditions but depends somewhat on the inter-particle coefficient of restitution. Finally, we show that the rheological properties of the basal layer do not follow the $μ(I)$ rheology, but are captured by Bagnold's stress scaling and an extended kinetic theory for granular flows. Our findings can help develop more predictive granular flow models in the future.
△ Less
Submitted 22 June, 2025;
originally announced June 2025.
-
Fully Coupled Implicit Hydro-Mechanical Multiphase Flow Simulation in Deformable Porous Media Using DEM
Authors:
Quanwei Dai,
Kang Duan,
Chung-Yee Kwok
Abstract:
Knowledge of the underlying mechanisms of multiphase flow dynamics in porous media is crucial for optimizing subsurface engineering applications like geological carbon sequestration. However, studying the micro-mechanisms of multiphase fluid--grain interactions in the laboratory is challenging due to the difficulty in obtaining mechanical data such as force and displacement. Transitional discrete…
▽ More
Knowledge of the underlying mechanisms of multiphase flow dynamics in porous media is crucial for optimizing subsurface engineering applications like geological carbon sequestration. However, studying the micro-mechanisms of multiphase fluid--grain interactions in the laboratory is challenging due to the difficulty in obtaining mechanical data such as force and displacement. Transitional discrete element method models coupled with pore networks offer insights into these interactions but struggle with accurate pressure prediction during pore expansion from fracturing and efficient simulation during the slow drainage of compressible fluids. To address these limitations, we develop an advanced two-way coupled hydro-mechanical discrete element method model that accurately and efficiently captures fluid--fluid and fluid--grain interactions in deformable porous media. Our model integrates an unconditionally stable implicit finite volume approach, enabling significant timesteps for advancing fluids. A pressure-volume iteration scheme dynamically balances injection-induced pressure buildup with substantial pore structure deformation, while flow front-advancing criteria precisely locate the fluid--fluid interface and adaptively refine timesteps, particularly when capillary effects block potential flow paths. The model is validated against benchmark Hele-Shaw experiments in both rigid and deformable porous media, providing quantitative insights into the micro-mechanisms governing multiphase flow. For the first time, grain-scale inputs such as viscous and capillary pressures, energies, contact forces, and flow resistances are utilized to provide a detailed understanding of micro-scale fluid--fluid and fluid--grain flow patterns and their transitions.
△ Less
Submitted 30 August, 2024;
originally announced August 2024.
-
Image-based study of granular column collapse over controlled-roughness surfaces
Authors:
Shuocheng Yang,
Lu Jing,
Chung Yee Kwok,
Gengchao Yang,
Yuri Dumaresq Sobral
Abstract:
Basal effects have important implications for the high mobility and long runout of granular flows such as rock avalanches and landslides. However, fundamental understanding of the basal effect in granular flows remains challenging due to the complex forms of base roughness and the multiscale nature of flow-bed interactions. Here we experimentally investigate the basal effect in granular column col…
▽ More
Basal effects have important implications for the high mobility and long runout of granular flows such as rock avalanches and landslides. However, fundamental understanding of the basal effect in granular flows remains challenging due to the complex forms of base roughness and the multiscale nature of flow-bed interactions. Here we experimentally investigate the basal effect in granular column collapse over controlled-roughness bases. Image processing methods are developed to obtain robust measurements of base roughness, runout distance and deposit morphology. A geometric roughness parameter Ra is applied to consider both the size and spatial distribution of base particles, which enables systematic analysis of the basal effect. The results indicate that the runout distance can be characterized as a function of Ra, regardless of the variations in the base particle size and spacing, and the roughness has a major influence on the frontal region of the granular flow, as well as the overall profile of the granular deposit. When Ra is increased beyond a threshold value (Ra > 0.62), flow characteristics show minor changes, which coinsides with a previous phase diagram for the transition between slip and non-slip boundary conditions from steady state granular flow simulations.
△ Less
Submitted 1 November, 2021;
originally announced November 2021.
-
A novel vortex-assisted generation system for hydrokinetic energy harvesting from slow water currents
Authors:
Ulugbek Azimov,
Jack Callaghan,
Iman Frozanpoor,
Callum Hulsmeier,
Christopher Kwok,
Matthew Nixon
Abstract:
A novel system has been developed that harnesses the phenomena of vortex-induced vibrations (VIV) from a slow current (<0.5 m/s) of water to generate renewable hydrokinetic energy. It utilizes a single degree-of-freedom pivoting cylinder mechanism coupled with an electromagnetic induction generator. As a result of observation and concept development, the final prototype includes a stationary cylin…
▽ More
A novel system has been developed that harnesses the phenomena of vortex-induced vibrations (VIV) from a slow current (<0.5 m/s) of water to generate renewable hydrokinetic energy. It utilizes a single degree-of-freedom pivoting cylinder mechanism coupled with an electromagnetic induction generator. As a result of observation and concept development, the final prototype includes a stationary cylindrical shedder upstream of the oscillator. The system is referred to as "Vortex Assisted Generation" (V.A.G.) throughout the report. Given the novelty of the system, an extensive investigation has been conducted to identify key parameters and functional relationships between system variables, regarding their effect on output voltage, frequency, and power. A range of flow velocities have been established that instigate system lock-in, where the cylinder oscillates at high amplitude and frequency. For the tested prototype up to 37% of system extraction efficiency has been achieved in the lab conditions.
△ Less
Submitted 3 August, 2020;
originally announced August 2020.
-
Predicting wind pressures around circular cylinders using machine learning techniques
Authors:
Gang Hu,
K. C. S. Kwok
Abstract:
Numerous studies have been carried out to measure wind pressures around circular cylinders since the early 20th century due to its engineering significance. Consequently, a large amount of wind pressure data sets have accumulated, which presents an excellent opportunity for using machine learning (ML) techniques to train models to predict wind pressures around circular cylinders. Wind pressures ar…
▽ More
Numerous studies have been carried out to measure wind pressures around circular cylinders since the early 20th century due to its engineering significance. Consequently, a large amount of wind pressure data sets have accumulated, which presents an excellent opportunity for using machine learning (ML) techniques to train models to predict wind pressures around circular cylinders. Wind pressures around smooth circular cylinders are a function of mainly the Reynolds number (Re), turbulence intensity (Ti) of the incident wind, and circumferential angle of the cylinder. Considering these three parameters as the inputs, this study trained two ML models to predict mean and fluctuating pressures respectively. Three machine learning algorithms including decision tree regressor, random forest, and gradient boosting regression trees (GBRT) were tested. The GBRT models exhibited the best performance for predicting both mean and fluctuating pressures, and they are capable of making accurate predictions for Re ranging from 10^4 to 10^6 and Ti ranging from 0% to 15%. It is believed that the GBRT models provide very efficient and economical alternative to traditional wind tunnel tests and computational fluid dynamic simulations for determining wind pressures around smooth circular cylinders within the studied Re and Ti range.
△ Less
Submitted 20 January, 2019;
originally announced January 2019.
-
A comprehensive study of coupled LBM-DEM with immersed moving boundary
Authors:
G. C. Yang,
L. Jing,
C. Y. Kwok,
Y. D. Sobral
Abstract:
A systematic study is carried out on a fully resolved fluid-particle model which couples the Lattice Boltzmann Method (LBM) and the Discrete Element Method (DEM) using an immersed moving boundary technique. Similar algorithms have been reported in the past decade, however, the roles of major model parameters are yet to be fully understood. To examine various numerical errors, a series of benchmark…
▽ More
A systematic study is carried out on a fully resolved fluid-particle model which couples the Lattice Boltzmann Method (LBM) and the Discrete Element Method (DEM) using an immersed moving boundary technique. Similar algorithms have been reported in the past decade, however, the roles of major model parameters are yet to be fully understood. To examine various numerical errors, a series of benchmark cases with a wide range of Reynolds number are performed, starting from a single stationary particle to multiple moving particles. It is found that for flow with low and intermediate Reynolds numbers, 20 fluid cells per one particle diameter are necessary to achieve sufficient accuracy (within 5%). For a flow with high Reynolds number, a turbulence model shall be incorporated so that the effects of unresolved small eddies can be captured in an accurate and efficient manner. Besides, the LBM-DEM results are also sensitive to the relaxation time, especially when the spatial resolution is inadequate. A large relaxation time can introduce additional diffusion of fluid momentum into the fluid-particle system, leading to weakened hydrodynamic interactions. By choosing a small relaxation time greater than the lower limit 0.5, a small fluid compressibility error and a strong coupling between fluids and particles can be achieved, at the cost of computational effort. The test cases also demonstrate the capability of LBM-DEM to describe the rheology of particle suspensions by capturing the pore-scale hydrodynamic interactions. Finally, a guideline for quickly establishing a high-quality LBM-DEM model is provided.
△ Less
Submitted 19 September, 2018;
originally announced September 2018.
-
Characterization of base roughness for granular chute flows
Authors:
Lu Jing,
C. Y. Kwok,
Y. F. Leung,
Y. D. Sobral
Abstract:
Base roughness plays an important role to the dynamics of granular flows but is yet poorly understood due to the difficulty of its quantification. For a bumpy base made by spheres, at least two factors should be considered to characterize its geometric roughness, namely the size ratio of base- to flow-particles and the packing of base particles. In this paper, we propose a definition of base rough…
▽ More
Base roughness plays an important role to the dynamics of granular flows but is yet poorly understood due to the difficulty of its quantification. For a bumpy base made by spheres, at least two factors should be considered to characterize its geometric roughness, namely the size ratio of base- to flow-particles and the packing of base particles. In this paper, we propose a definition of base roughness, Ra, which is a function of both the size ratio and the packing arrangement of base particles. The function is generalized for random and regular packing of multi-layered spheres, where the range of possible values of Ra is studied, along with the optimal values to create maximum base roughness. The new definition is applied to granular flows down chute in both two- and three-dimensional configurations. It is proven to be a good indicator of slip condi- tion, and a transition occurs from slip to non-slip condition as Ra increases. Critical values of Ra are identified for the construction of a non-slip base. The effects of contact parameters on base velocity are studied, and it is shown that while the coefficient of friction is less influential, normal damping has more profound effect on base velocity at lower values of Ra. The application of present definition to other base geometries is also discussed.
△ Less
Submitted 11 June, 2016;
originally announced June 2016.
