-
One-step Fabrication of Sharp Platinum/Iridium Tips via Amplitude-Modulated Alternating-Current Electropolishing
Authors:
Yuto Nishiwaki,
Toru Utsunomiya,
Shu Kurokawa,
Takashi Ichii
Abstract:
The platinum/iridium (Pt/Ir) alloy tip for scanning probe microscopy (SPM) was fabricated by amplitude-modulated alternating-current (AC) electropolishing. The clean tips with a radius of curvature less than 100 nm were reproducibly obtained by applying the sinusoidal voltage in the frequency ($f_0$) of $900\ \mathrm{Hz} \leq f_0 \leq 1500\ \mathrm{Hz}$ with amplitude modulation by the sinusoidal…
▽ More
The platinum/iridium (Pt/Ir) alloy tip for scanning probe microscopy (SPM) was fabricated by amplitude-modulated alternating-current (AC) electropolishing. The clean tips with a radius of curvature less than 100 nm were reproducibly obtained by applying the sinusoidal voltage in the frequency ($f_0$) of $900\ \mathrm{Hz} \leq f_0 \leq 1500\ \mathrm{Hz}$ with amplitude modulation by the sinusoidal wave in the modulation frequency ($f_s$) of $f_s=0.1f_0$ in $\mathrm{CaCl}_2$/$\mathrm{H_2O}$/acetone solution. The analyses by scanning electron microscopy with an energy-dispersive X-ray analyzer (SEM-EDX) and atom probe tomography (APT) showed that a uniform Pt/Ir alloy was exposed on the tip surface as a clean surface without O or Cl contamination. The STM imaging using the fabricated tip showed that it is more suitable for investigating rough surfaces than conventional as-cut tips and applicable for atomic-resolution imaging. Furthermore, we applied the fabricated tip to qPlus AFM analysis in liquid and showed that it has atomic resolution in both the horizontal and vertical directions. Therefore, it is concluded that the amplitude-modulated AC etching method reproducibly provides sharp STM/AFM tips capable of both atomic resolution and large-area analyses without complex etching setups.
△ Less
Submitted 16 February, 2025; v1 submitted 2 December, 2024;
originally announced December 2024.
-
Social cohesion V.S. task cohesion: An evolutionary game theory study
Authors:
Xinglong Qu,
Shun Kurokawa,
The Anh Han
Abstract:
Using methods from evolutionary game theory, this paper investigates the difference between social cohesion and task cohesion in promoting the evolution of cooperation in group interactions. Players engage in public goods games and are allowed to leave their groups if too many defections occur. Both social cohesion and task cohesion may prevent players from leaving. While a higher level of social…
▽ More
Using methods from evolutionary game theory, this paper investigates the difference between social cohesion and task cohesion in promoting the evolution of cooperation in group interactions. Players engage in public goods games and are allowed to leave their groups if too many defections occur. Both social cohesion and task cohesion may prevent players from leaving. While a higher level of social cohesion increases a player's tolerance towards defections, task cohesion is associated with her group performance in the past. With a higher level of task cohesion, it is more likely that a dissatisfied player will refer to the history and remains in her group if she was satisfied in the past. Our results reveal that social cohesion is detrimental to the evolution of cooperation while task cohesion facilitates it. This is because social cohesion hinders the conditional dissociation mechanism but task cohesion improves the robustness of cooperative groups which are usually vulnerable to mistakes. We also discuss other potential aspects of cohesion and how they can be investigated through our modelling. Overall, our analysis provides novel insights into the relationship between group cohesion and group performance through studying the group dynamics and suggests further application of evolutionary game theory in this area.
△ Less
Submitted 18 January, 2021;
originally announced January 2021.
-
Further comments on "Individual external dose monitoring of all citizens of Date City by passive dosimeter 5 to 51 months after the Fukushima NPP accident (series): 1." : Inconsistencies in Table 1 2014 Q3 and Figure 4f
Authors:
Shin-ichi Kurokawa,
Yutaka Hamaoka,
Kyo Kageura,
Jun Makino,
Masaki Oshikawa,
Yoh Tanimoto
Abstract:
We point out serious inconsistencies of the first paper of the series, written by Makoto Miyazaki and Ryugo Hayano, which discusses the correlation between the personal doses of the citizens of Date City measured by glass badges with the ambient dose rates measured by six airborne surveys. The last of the six airborne survey was made in the period of 2014 Q3 (from October 2014 to December 2014). T…
▽ More
We point out serious inconsistencies of the first paper of the series, written by Makoto Miyazaki and Ryugo Hayano, which discusses the correlation between the personal doses of the citizens of Date City measured by glass badges with the ambient dose rates measured by six airborne surveys. The last of the six airborne survey was made in the period of 2014 Q3 (from October 2014 to December 2014). The real number of participants of the period is about 14,500; however, in Table 1 2014 Q3 it is written that the number of participants is 21,080 and in Fig. 4f 21,052. We conclude that the analysis of the paper with respect to Table 1 2014 Q3 and Fig. 4f are done without using real correct data and we cannot obtain any meaningful information from the table and figure. Since the period 2014 Q3 is also included in Fig. 5 of the second paper of the series, it is quite possible that Fig. 5 of the second paper is made on the basis of, at least partially, false data and is not reliable.
△ Less
Submitted 10 March, 2020;
originally announced March 2020.
-
Comment on "Individual external dose monitoring of all citizens of Date City by passive dosimeter 5 to 51 months after the Fukushima NPP accident (series): 1."
Authors:
Masaki Oshikawa,
Yutaka Hamaoka,
Kyo Kageura,
Shin-ichi Kurokawa,
Jun Makino,
Yoh Tanimoto
Abstract:
We point out numerous inconsistencies and inappropriate statements in M. Miyazaki and H. Hayano, Journal of Radiological Protection 37, 1 (2016).
We point out numerous inconsistencies and inappropriate statements in M. Miyazaki and H. Hayano, Journal of Radiological Protection 37, 1 (2016).
△ Less
Submitted 31 January, 2020;
originally announced January 2020.
-
Comment on "Individual external dose monitoring of all citizens of Date City by passive dosimeter 5 to 51 months after the Fukushima NPP accident (series): II"
Authors:
Shin-ichi Kurokawa,
Yoh Tanimoto,
Yutaka Hamaoka,
Kyo Kageura,
Jun Makino,
Masaki Oshikawa
Abstract:
This Letter to the Editor points out several inconsistencies found in the paper written by Makoto Miyazaki and Ryugo Hayano published as J. Radiol. Prot. 37(2017) 623-634. This Letter to the Editor had been in the stage of "is ready to accept" from November 17, 2018 to March 23, 2020 when it has been accepted for publication. Onto this Letter to the Editor, an additional Letter to the Editor on th…
▽ More
This Letter to the Editor points out several inconsistencies found in the paper written by Makoto Miyazaki and Ryugo Hayano published as J. Radiol. Prot. 37(2017) 623-634. This Letter to the Editor had been in the stage of "is ready to accept" from November 17, 2018 to March 23, 2020 when it has been accepted for publication. Onto this Letter to the Editor, an additional Letter to the Editor on the same paper has been added. The added Letter to the Editor has been provisionally accepted on April 7, 2020.
△ Less
Submitted 5 August, 2020; v1 submitted 29 December, 2018;
originally announced December 2018.
-
Magnetic resonance of rubidium atoms passing through a multi-layered transmission magnetic grating
Authors:
Y. Nagata,
S. Kurokawa,
A. Hatakeyama
Abstract:
We measured the magnetic resonance of rubidium atoms passing through periodic magnetic fields generated by two types of multilayered transmission magnetic grating. One of the gratings reported here was assembled by stacking four layers of magnetic films so that the direction of magnetization alternated at each level. The other grating was assembled so that the magnetization at each level was align…
▽ More
We measured the magnetic resonance of rubidium atoms passing through periodic magnetic fields generated by two types of multilayered transmission magnetic grating. One of the gratings reported here was assembled by stacking four layers of magnetic films so that the direction of magnetization alternated at each level. The other grating was assembled so that the magnetization at each level was aligned. For both types of grating, the experimental results were in good agreement with our calculations. We studied the feasibility of extending the frequency band of the grating and narrowing its resonance linewidth by performing calculations. For magnetic resonance precision spectroscopy, we conclude that the multi-layered transmission magnetic grating can generate periodic fields with narrower linewidths at higher frequencies when a larger number of layers is assembled at a shorter period length. Moreover, the frequency band of this type of grating can potentially achieve frequencies of up to hundreds of PHz.
△ Less
Submitted 26 April, 2017; v1 submitted 8 January, 2017;
originally announced January 2017.
