Showing 1–50 of 96 results for author: Kumar, M

Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, A. Abada , et al. (1439 additional authors not shown)

Abstract: In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;… ▽ More In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase. FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible. FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes. This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 627 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0004

Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I… ▽ More Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region. The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 357 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0003

Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.… ▽ More Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 290 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-PHYS-2025-0002

Using Machine Learning and Neural Networks to Analyze and Predict Chaos in Multi-Pendulum and Chaotic Systems

Authors: Vasista Ramachandruni, Sai Hruday Reddy Nara, Geo Lalu, Sabrina Yang, Mohit Ramesh Kumar, Aarjav Jain, Pratham Mehta, Hankyu Koo, Jason Damonte, Marx Akl

Abstract: A chaotic system is a highly volatile system characterized by its sensitive dependence on initial conditions and outside factors. Chaotic systems are prevalent throughout the world today: in weather patterns, disease outbreaks, and even financial markets. Chaotic systems are seen in every field of science and humanities, so being able to predict these systems is greatly beneficial to society. In t… ▽ More A chaotic system is a highly volatile system characterized by its sensitive dependence on initial conditions and outside factors. Chaotic systems are prevalent throughout the world today: in weather patterns, disease outbreaks, and even financial markets. Chaotic systems are seen in every field of science and humanities, so being able to predict these systems is greatly beneficial to society. In this study, we evaluate 10 different machine learning models and neural networks [1] based on Root Mean Squared Error (RMSE) and R^2 values for their ability to predict one of these systems, the multi-pendulum. We begin by generating synthetic data representing the angles of the pendulum over time using the Runge Kutta Method for solving 4th Order Differential Equations (ODE-RK4) [2]. At first, we used the single-step sliding window approach, predicting the 50st step after training for steps 0-49 and so forth. However, to more accurately cover chaotic motion and behavior in these systems, we transitioned to a time-step based approach. Here, we trained the model/network on many initial angles and tested it on a completely new set of initial angles, or 'in-between' to capture chaotic motion to its fullest extent. We also evaluated the stability of the system using Lyapunov exponents. We concluded that for a double pendulum, the best model was the Long Short Term Memory Network (LSTM)[3] for the sliding window and time step approaches in both friction and frictionless scenarios. For triple pendulum, the Vanilla Recurrent Neural Network (VRNN)[4] was the best for the sliding window and Gated Recurrent Network (GRU) [5] was the best for the time step approach, but for friction, LSTM was the best. △ Less

Submitted 18 April, 2025; originally announced April 2025.

Comments: 35 Pages, Approximately 20 figures

Predicting Soil Macronutrient Levels: A Machine Learning Approach Models Trained on pH, Conductivity, and Average Power of Acid-Base Solutions

Authors: Mridul Kumar, Deepali Jain, Zeeshan Saifi, Soami Daya Krishnananda

Abstract: Soil macronutrients, particularly potassium ions (K$^+$), are indispensable for plant health, underpinning various physiological and biological processes, and facilitating the management of both biotic and abiotic stresses. Deficient macronutrient content results in stunted growth, delayed maturation, and increased vulnerability to environmental stressors, thereby accentuating the imperative for p… ▽ More Soil macronutrients, particularly potassium ions (K$^+$), are indispensable for plant health, underpinning various physiological and biological processes, and facilitating the management of both biotic and abiotic stresses. Deficient macronutrient content results in stunted growth, delayed maturation, and increased vulnerability to environmental stressors, thereby accentuating the imperative for precise soil nutrient monitoring. Traditional techniques such as chemical assays, atomic absorption spectroscopy, inductively coupled plasma optical emission spectroscopy, and electrochemical methods, albeit advanced, are prohibitively expensive and time-intensive, thus unsuitable for real-time macronutrient assessment. In this study, we propose an innovative soil testing protocol utilizing a dataset derived from synthetic solutions to model soil behaviour. The dataset encompasses physical properties including conductivity and pH, with a concentration on three key macronutrients: nitrogen (N), phosphorus (P), and potassium (K). Four machine learning algorithms were applied to the dataset, with random forest regressors and neural networks being selected for the prediction of soil nutrient concentrations. Comparative analysis with laboratory soil testing results revealed prediction errors of 23.6% for phosphorus and 16% for potassium using the random forest model, and 26.3% for phosphorus and 21.8% for potassium using the neural network model. This methodology illustrates a cost-effective and efficacious strategy for real-time soil nutrient monitoring, offering substantial advancements over conventional techniques and enhancing the capability to sustain optimal nutrient levels conducive to robust crop growth. △ Less

Submitted 5 April, 2025; originally announced April 2025.

Ordering transition of the three-dimensional four-state random-field Potts model

Authors: Manoj Kumar, Martin Weigel

Abstract: Spin systems exposed to the influence of random magnetic fields are paradigmatic examples for studying the effect of quenched disorder on condensed-matter systems. In this context, previous studies have almost exclusively focused on systems with Ising or continuous symmetries, while the Potts symmetry, albeit being of fundamental importance also for the description of realistic physical systems, h… ▽ More Spin systems exposed to the influence of random magnetic fields are paradigmatic examples for studying the effect of quenched disorder on condensed-matter systems. In this context, previous studies have almost exclusively focused on systems with Ising or continuous symmetries, while the Potts symmetry, albeit being of fundamental importance also for the description of realistic physical systems, has received very little attention. In the present study, we use a recently developed quasi-exact method for determining ground states in the random-field Potts model to study the problem with four states. Extending the protocol applied for the three-state model, we use extensive finite-size scaling analyses of the magnetization, Binder parameter, energy cumulant, specific heat, and the connected as well as disconnected susceptibilities to study the magnetic ordering transition of the model. In contrast to the system in the absence of disorder, we find compelling evidence for a continuous transition, and we precisely determine the critical point as well as the critical exponents, which are found to differ from the exponents of the three-state system as well as from those of the random-field Ising model. △ Less

Submitted 4 April, 2025; originally announced April 2025.

Comments: 16 pages, 12 figures, 6 tables, RevTeX4.1

Sub-second spin and lifetime-limited optical coherences in $^{171}$Yb$^{3+}$:CaWO$_4$

Authors: Alexey Tiranov, Emanuel Green, Sophie Hermans, Erin Liu, Federico Chiossi, Diana Serrano, Pascal Loiseau, Achuthan Manoj Kumar, Sylvain Bertaina, Andrei Faraon, Philippe Goldner

Abstract: Optically addressable solid-state spins have been extensively studied for quantum technologies, offering unique advantages for quantum computing, communication, and sensing. Advancing these applications is generally limited by finding materials that simultaneously provide lifetime-limited optical and long spin coherences. Here, we introduce $^{171}$Yb$^{3+}$ ions doped into a CaWO$_4$ crystal. We… ▽ More Optically addressable solid-state spins have been extensively studied for quantum technologies, offering unique advantages for quantum computing, communication, and sensing. Advancing these applications is generally limited by finding materials that simultaneously provide lifetime-limited optical and long spin coherences. Here, we introduce $^{171}$Yb$^{3+}$ ions doped into a CaWO$_4$ crystal. We perform high-resolution spectroscopy of the excited state, and demonstrate all-optical coherent control of the electron-nuclear spin ensemble. We find narrow inhomogeneous broadening of the optical transitions of 185 MHz and radiative-lifetime-limited coherence time up to 0.75 ms. Next to this, we measure a spin-transition ensemble line width of 5 kHz and electron-nuclear spin coherence time reaching 0.15 seconds at zero magnetic field between 50 mK and 1 K temperatures. These results demonstrate the potential of $^{171}$Yb$^{3+}$:CaWO$_4$ as a low-noise platform for building quantum technologies with ensemble-based memories, microwave-to-optical transducers, and optically addressable single-ion spin qubits. △ Less

Submitted 2 April, 2025; originally announced April 2025.

European Contributions to Fermilab Accelerator Upgrades and Facilities for the DUNE Experiment

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The Proton Improvement Plan (PIP-II) to the FNAL accelerator chain and the Long-Baseline Neutrino Facility (LBNF) will provide the world's most intense neutrino beam to the Deep Underground Neutrino Experiment (DUNE) enabling a wide-ranging physics program. This document outlines the significant contributions made by European national laboratories and institutes towards realizing the first phase o… ▽ More The Proton Improvement Plan (PIP-II) to the FNAL accelerator chain and the Long-Baseline Neutrino Facility (LBNF) will provide the world's most intense neutrino beam to the Deep Underground Neutrino Experiment (DUNE) enabling a wide-ranging physics program. This document outlines the significant contributions made by European national laboratories and institutes towards realizing the first phase of the project with a 1.2 MW neutrino beam. Construction of this first phase is well underway. For DUNE Phase II, this will be closely followed by an upgrade of the beam power to > 2 MW, for which the European groups again have a key role and which will require the continued support of the European community for machine aspects of neutrino physics. Beyond the neutrino beam aspects, LBNF is also responsible for providing unique infrastructure to install and operate the DUNE neutrino detectors at FNAL and at the Sanford Underground Research Facility (SURF). The cryostats for the first two Liquid Argon Time Projection Chamber detector modules at SURF, a contribution of CERN to LBNF, are central to the success of the ongoing execution of DUNE Phase I. Likewise, successful and timely procurement of cryostats for two additional detector modules at SURF will be critical to the success of DUNE Phase II and the overall physics program. The DUNE Collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This paper is being submitted to the 'Accelerator technologies' and 'Projects and Large Experiments' streams. Additional inputs related to the DUNE science program, DUNE detector technologies and R&D, and DUNE software and computing, are also being submitted to other streams. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

DUNE Software and Computing Research and Development

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The ambitious physics program of Phase I and Phase II of DUNE is dependent upon deployment and utilization of significant computing res… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The ambitious physics program of Phase I and Phase II of DUNE is dependent upon deployment and utilization of significant computing resources, and successful research and development of software (both infrastructure and algorithmic) in order to achieve these scientific goals. This submission discusses the computing resources projections, infrastructure support, and software development needed for DUNE during the coming decades as an input to the European Strategy for Particle Physics Update for 2026. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Computing' stream focuses on DUNE software and computing. Additional inputs related to the DUNE science program, DUNE detector technologies and R&D, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

The DUNE Phase II Detectors

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the previous European Strategy for Particle Physics. The construction of DUNE Phase I is well underway. DUNE Phase II consists of a third and fourth far detector module, an upgraded near detector complex, and an enhanced > 2 MW beam. The fourth FD module is conceived as a 'Module of Opportunity', aimed at supporting the core DUNE science program while also expanding the physics opportunities with more advanced technologies. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Detector instrumentation' stream focuses on technologies and R&D for the DUNE Phase II detectors. Additional inputs related to the DUNE science program, DUNE software and computing, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams. △ Less

Submitted 29 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

Embedding 1D BDI topological models into continuous elastic plates

Authors: Mohit Kumar, Fabio Semperlotti

Abstract: One-dimensional mechanical topological metamaterials belonging to the BDI symmetry class (that is, preserving time-reversal, chiral, and particle-hole symmetries) have been realized in discrete systems by exploiting arrangements of either masses and springs or acoustic resonators. This study presents an approach to embed one-dimensional BDI class metamaterials into fully continuous elastic two-dim… ▽ More One-dimensional mechanical topological metamaterials belonging to the BDI symmetry class (that is, preserving time-reversal, chiral, and particle-hole symmetries) have been realized in discrete systems by exploiting arrangements of either masses and springs or acoustic resonators. This study presents an approach to embed one-dimensional BDI class metamaterials into fully continuous elastic two-dimensional waveguides. The design leverages the concept of evanescently coupled waveguides and defect resonances in order to reproduce the equivalent dynamics of prototypical BDI systems, such as the Su-Schrieffer-Heeger (SSH) model. Starting with a continuous plate waveguide with a periodic distribution of pillars, resonant waveguides and local defects are created by either eliminating or by properly adjusting the height of selected pillars. The approach is validated by designing fully continuous elastic analogs of the SSH model and the dual SSH model. Numerical simulations confirm the emergence of topological edge modes at the interface of topologically distinct systems. In addition, edge modes in the elastic analog of the dual SSH model are shown to be Majorana-like modes. △ Less

Submitted 17 March, 2025; originally announced March 2025.

Direct Numerical Simulations of Droplet Impact onto Heated Surfaces using the Program Free Surface 3D (FS3D)

Authors: Manish Kumar, Rishav Saha, Johanna Potyka, Kathrin Schulte, Bernhard Weigand

Abstract: Droplet impact onto heated surfaces is a widespread process in industrial applications, particularly in the context of spray cooling techniques. Therefore, it is essential to study the complex phenomenon of droplet spreading, heat removal from a hot surface, and flow distribution during the impact. This study focuses on Direct Numerical Simulation (DNS) of the initial stage of a water droplet impa… ▽ More Droplet impact onto heated surfaces is a widespread process in industrial applications, particularly in the context of spray cooling techniques. Therefore, it is essential to study the complex phenomenon of droplet spreading, heat removal from a hot surface, and flow distribution during the impact. This study focuses on Direct Numerical Simulation (DNS) of the initial stage of a water droplet impact onto a highly conducting heated surface, below the saturation temperature of the liquid. The maximum spreading diameters at different impact velocities in the presence of a heated surface, are analysed. Free Surface 3D (FS3D), an in-house code developed at the Institute of Aerospace Thermodynamics, University of Stuttgart, is used for this work. A grid independence study investigates the resolution required to resolve the flow field around the droplet. As evaporation effects during the initial stage of the droplet impact process are negligible, they are ignored. However, for longer simulation times, evaporation plays a significant role in the process. Preparing for such simulations, an evaporating droplet in cross flow is simulated to study the performance gain in the newly implemented hybrid OpenMP and MPI parallelisation and red-black optimization in the evaporation routines of FS3D. Both the scaling limit and efficiency were improved by using the hybrid (MPI with OpenMP) parallelisation, while the red-black scheme optimization raised the efficiency only. An improved performance of 23% of the new version is achieved for a test case investigated with the tool MAQAO. Additionally, strong and weak scaling performance tests are conducted. The new version is found to scale up to 256 nodes compared to 128 nodes for the original version. The maximum time-cycles per hour (CPH) achieved with the new version is 35% higher compared to the previous version. △ Less

Submitted 26 February, 2025; originally announced March 2025.

Strain engineering of valley-polarized hybrid excitons in a 2D semiconductor

Authors: Abhijeet M. Kumar, Douglas J. Bock, Denis Yagodkin, Edith Wietek, Bianca Höfer, Max Sinner, Pablo Hernández López, Sebastian Heeg, Cornelius Gahl, Florian Libisch, Alexey Chernikov, Ermin Malic, Roberto Rosati, Kirill I. Bolotin

Abstract: Encoding and manipulating digital information in quantum degrees of freedom is one of the major challenges of today's science and technology. The valley indices of excitons in transition metal dichalcogenides (TMDs) are well-suited to address this challenge. Here, we demonstrate a new class of strain-tunable, valley-polarized hybrid excitons in monolayer TMDs, comprising a pair of energy-resonant… ▽ More Encoding and manipulating digital information in quantum degrees of freedom is one of the major challenges of today's science and technology. The valley indices of excitons in transition metal dichalcogenides (TMDs) are well-suited to address this challenge. Here, we demonstrate a new class of strain-tunable, valley-polarized hybrid excitons in monolayer TMDs, comprising a pair of energy-resonant intra- and intervalley excitons. These states combine the advantages of bright intravalley excitons, where the valley index directly couples to light polarization, and dark intervalley excitons, characterized by low depolarization rates. We demonstrate that the hybridized state of dark KK' intervalley and defect-localized excitons exhibits a degree of circular polarization of emitted photons that is three times higher than that of the constituent species. Moreover, a bright KK intravalley and a dark KQ exciton form a coherently coupled hybrid state under energetic resonance, with their valley depolarization dynamics slowed down a hundredfold. Overall, these valley-polarized hybrid excitons with strain-tunable valley character emerge as prime candidates for valleytronic applications in future quantum and information technology. △ Less

Submitted 16 February, 2025; originally announced February 2025.

Comments: This manuscript consists of 10 pages and 4 figures

Terrestrial Very-Long-Baseline Atom Interferometry: Summary of the Second Workshop

Authors: Adam Abdalla, Mahiro Abe, Sven Abend, Mouine Abidi, Monika Aidelsburger, Ashkan Alibabaei, Baptiste Allard, John Antoniadis, Gianluigi Arduini, Nadja Augst, Philippos Balamatsias, Antun Balaz, Hannah Banks, Rachel L. Barcklay, Michele Barone, Michele Barsanti, Mark G. Bason, Angelo Bassi, Jean-Baptiste Bayle, Charles F. A. Baynham, Quentin Beaufils, Slyan Beldjoudi, Aleksandar Belic, Shayne Bennetts, Jose Bernabeu , et al. (285 additional authors not shown)

Abstract: This summary of the second Terrestrial Very-Long-Baseline Atom Interferometry (TVLBAI) Workshop provides a comprehensive overview of our meeting held in London in April 2024, building on the initial discussions during the inaugural workshop held at CERN in March 2023. Like the summary of the first workshop, this document records a critical milestone for the international atom interferometry commun… ▽ More This summary of the second Terrestrial Very-Long-Baseline Atom Interferometry (TVLBAI) Workshop provides a comprehensive overview of our meeting held in London in April 2024, building on the initial discussions during the inaugural workshop held at CERN in March 2023. Like the summary of the first workshop, this document records a critical milestone for the international atom interferometry community. It documents our concerted efforts to evaluate progress, address emerging challenges, and refine strategic directions for future large-scale atom interferometry projects. Our commitment to collaboration is manifested by the integration of diverse expertise and the coordination of international resources, all aimed at advancing the frontiers of atom interferometry physics and technology, as set out in a Memorandum of Understanding signed by over 50 institutions. △ Less

Submitted 19 December, 2024; originally announced December 2024.

Comments: Summary of the second Terrestrial Very-Long-Baseline Atom Interferometry Workshop held at Imperial College London: https://indico.cern.ch/event/1369392/

Elastoinertial turbulence: Data-driven reduced-order model based on manifold dynamics

Authors: Manish Kumar, C. Ricardo Constante-Amores, Michael D. Graham

Abstract: Elastoinertial turbulence (EIT) is a chaotic state that emerges in the flows of dilute polymer solutions. Direct numerical simulation (DNS) of EIT is highly computationally expensive due to the need to resolve the multi-scale nature of the system. While DNS of 2D EIT typically requires $O(10^6)$ degrees of freedom, we demonstrate here that a data-driven modeling framework allows for the constructi… ▽ More Elastoinertial turbulence (EIT) is a chaotic state that emerges in the flows of dilute polymer solutions. Direct numerical simulation (DNS) of EIT is highly computationally expensive due to the need to resolve the multi-scale nature of the system. While DNS of 2D EIT typically requires $O(10^6)$ degrees of freedom, we demonstrate here that a data-driven modeling framework allows for the construction of an accurate model with 50 degrees of freedom. We achieve a low-dimensional representation of the full state by first applying a viscoelastic variant of proper orthogonal decomposition to DNS results, and then using an autoencoder. The dynamics of this low-dimensional representation are learned using the neural ODE method, which approximates the vector field for the reduced dynamics as a neural network. The resulting low-dimensional data-driven model effectively captures short-time dynamics over the span of one correlation time, as well as long-time dynamics, particularly the self-similar, nested traveling wave structure of 2D EIT in the parameter range considered. △ Less

Submitted 20 January, 2025; v1 submitted 3 October, 2024; originally announced October 2024.

Comments: Accepted for publication in JFM Rapids

Journal ref: J. Fluid Mech. 1007 (2025) R1

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. Al Kadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola, R. B. Amir , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 18 December, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Journal ref: JINST 19 (2024) P11025

Band geometry induced electro-optic effect and polarization rotation

Authors: M. Maneesh Kumar, Sanjay Sarkar, Amit Agarwal

Abstract: Electric field-induced modulation of the optical properties is crucial for amplitude and phase modulators used in photonic devices. Here, we present a comprehensive study of the band geometry-induced electro-optic effect, specifically focusing on the Fermi surface and disorder-induced contributions. These contributions are crucial for metallic and semimetallic systems and for optical frequencies c… ▽ More Electric field-induced modulation of the optical properties is crucial for amplitude and phase modulators used in photonic devices. Here, we present a comprehensive study of the band geometry-induced electro-optic effect, specifically focusing on the Fermi surface and disorder-induced contributions. These contributions are crucial for metallic and semimetallic systems and for optical frequencies comparable to or smaller than the scattering rates. We highlight the importance of the quantum metric and metric connection in generating the electro-optic effect in parity-time reversal ($\mathcal{PT}$) symmetric systems such as CuMnAs. Our findings establish the electro-optic effect as a novel tool to probe band geometric effects and open new avenues to design electrically controlled efficient amplitude and phase modulators for photonic applications. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Comments: 11 pages, 3 figures

Off-axis holographic imaging with undetected light

Authors: Josué R. León-Torres, Filip Krajinić, Mohit Kumar, Marta Gilaberte Basset, Frank Setzpfandt, Valerio Flavio Gili, Branislav Jelenković, Markus Gräfe

Abstract: Quantum imaging with undetected light (QIUL) can retrieve amplitude and phase information of an object by exploiting the quantum correlations of photon-pairs generated through spontaneous parametric down conversion (SPDC), where the illumination and detection can be carried at very distinct wavelength ranges. This fact allows to benefit from a mature detection technology in the visible spectral ra… ▽ More Quantum imaging with undetected light (QIUL) can retrieve amplitude and phase information of an object by exploiting the quantum correlations of photon-pairs generated through spontaneous parametric down conversion (SPDC), where the illumination and detection can be carried at very distinct wavelength ranges. This fact allows to benefit from a mature detection technology in the visible spectral range, while probing the object at a more exotic wavelength. Here we experimentally implement a QIUL approach with Fourier off-axis holography in a hybrid-type induced-coherence non-linear interferometer. Our approach reconstructs the amplitude and phase information of an object with a single shot in a wide-field configuration, being an alternative in front of techniques that require multiple acquisition frames, such as phase-shifting holography. △ Less

Submitted 26 April, 2024; originally announced April 2024.

Comments: 13 pages, 7 figures

Pocket Schlieren: a background oriented schlieren imaging platform on a smartphone

Authors: Diganta Rabha, Vimod Kumar, Akshay Kumar, Dinesh Saini, Manish Kumar

Abstract: Background-oriented schlieren (BOS) is a powerful technique for flow visualization. Nevertheless, the widespread dissemination of BOS is impeded by its dependence on scientific cameras, computing hardware, and dedicated analysis software. In this work, we aim to democratize BOS by providing a smartphone based scientific tool called "Pocket Schlieren". Pocket Schlieren enables users to directly cap… ▽ More Background-oriented schlieren (BOS) is a powerful technique for flow visualization. Nevertheless, the widespread dissemination of BOS is impeded by its dependence on scientific cameras, computing hardware, and dedicated analysis software. In this work, we aim to democratize BOS by providing a smartphone based scientific tool called "Pocket Schlieren". Pocket Schlieren enables users to directly capture, process, and visualize flow phenomena on their smartphones. The underlying algorithm incorporates consecutive frame subtraction (CFS) and optical flow (OF) techniques to compute the density gradients inside a flow. It performs on both engineered and natural background patterns. Using Pocket Schlieren, we successfully visualized the flow produced from a burning candle flame, butane lighter, hot soldering iron, room heater, water immersion heating rod, and a large outdoor butane flame. Pocket Schlieren promises to serve as a frugal yet potent instrument for scientific and educational purposes. We have made it publicly available at doi: 10.5281/zenodo.10949271. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Comments: 24 pages, 6 figures, 4 Supplementary figures

On the role of geometric phase in the dynamics of elastic waveguides

Authors: Mohit Kumar, Fabio Semperlotti

Abstract: The geometric phase provides important mathematical insights to understand the fundamental nature and evolution of the dynamic response in a wide spectrum of systems ranging from quantum to classical mechanics. While the concept of geometric phase, which is an additional phase factor occurring in dynamical systems, holds the same meaning across different fields of application, its use and interpre… ▽ More The geometric phase provides important mathematical insights to understand the fundamental nature and evolution of the dynamic response in a wide spectrum of systems ranging from quantum to classical mechanics. While the concept of geometric phase, which is an additional phase factor occurring in dynamical systems, holds the same meaning across different fields of application, its use and interpretation can acquire important nuances specific to the system of interest. In recent years, the development of quantum topological materials and its extension to classical mechanical systems have renewed the interest in the concept of geometric phase. This review revisits the concept of geometric phase and discusses, by means of either established or original results, its critical role in the design and dynamic behavior of elastic waveguides. Concepts of differential geometry and topology are put forward to provide a theoretical understanding of the geometric phase and its connection to the physical properties of the system. Then, the concept of geometric phase is applied to different types of elastic waveguides to explain how either topologically trivial or non-trivial behavior can emerge based on the geometric features of the waveguide. △ Less

Submitted 17 March, 2025; v1 submitted 13 March, 2024; originally announced March 2024.

Comments: Updated title to match journal publication

Journal ref: Philosophical Transactions A 382.2279 (2024): 20230357

Nested traveling wave structures in elastoinertial turbulence

Authors: Manish Kumar, Michael D. Graham

Abstract: Elastoinertial turbulence (EIT) is a chaotic flow resulting from the interplay between inertia and viscoelasticity in wall bounded shear flows. Understanding EIT is important because it is thought to set a limit on the effectiveness of turbulent drag reduction in polymer solutions. Here, we analyze simulations of two dimensional EIT in channel flow using Spectral Proper Orthogonal Decomposition (S… ▽ More Elastoinertial turbulence (EIT) is a chaotic flow resulting from the interplay between inertia and viscoelasticity in wall bounded shear flows. Understanding EIT is important because it is thought to set a limit on the effectiveness of turbulent drag reduction in polymer solutions. Here, we analyze simulations of two dimensional EIT in channel flow using Spectral Proper Orthogonal Decomposition (SPOD), discovering a family of traveling wave structures that capture the sheetlike stress fluctuations that characterize EIT. The frequency dependence of the leading SPOD mode contains distinct peaks and the mode structures corresponding to these peaks exhibit well defined traveling structures. The structure of the dominant traveling mode exhibits shift reflect symmetry similar to the viscoelasticity modified Tollmien Schlichting (TS) wave, where the velocity fluctuation in the traveling mode is characterized by large scale regular structures spanning the channel and the polymer stress field is characterized by thin, inclined sheets of high polymer stress localized at the critical layers near the channel walls. The traveling structures corresponding to the higher frequency modes have a very similar structure, but are nested in a region roughly bounded by the critical layer positions of the next lower frequency mode. A simple theory based on the idea that the critical layers of mode $κ$ form the "walls" for the structure of mode $κ+1$ yields quantitative agreement with the observed wave speeds and critical layer positions, indicating self similarity between the structures. The physical idea behind this theory is that the sheetlike localized stress fluctuations in the critical layer prevent velocity fluctuations from penetrating them. △ Less

Submitted 23 July, 2024; v1 submitted 11 March, 2024; originally announced March 2024.

Comments: It has been accepted for publication in the Journal of Fluid Mechanics

Narrowband THz Emission from a Plasma Oscillator Imbedded in a Plasma Density Gradient

Authors: Manoj Kumar, Bernhard Ersfeld, Jaeho Lee, Dohyun Park, Seungyun Kim, Inhyuk Nam, Minseok Kim, Seongjin Jeon, Dino A. Jaroszynski, Hyyong Suk, Min Sup Hur

Abstract: A novel method is presented for generating radiation using the beat wave associated with a bi-frequency laser pulse, to excite plasma oscillations in a plasma slab with a density gradient. By resonantly exciting a plasma wave, it can be localised and transformed into a plasma oscillator that produces a beam of radially polarised terahertz radiation. Particle-in-cell simulations and analytic theory… ▽ More A novel method is presented for generating radiation using the beat wave associated with a bi-frequency laser pulse, to excite plasma oscillations in a plasma slab with a density gradient. By resonantly exciting a plasma wave, it can be localised and transformed into a plasma oscillator that produces a beam of radially polarised terahertz radiation. Particle-in-cell simulations and analytic theory are used to demonstrate its main characteristics, which includes narrow bandwidth. The radiator should have useful applications such as terahertz-band particle accelerators and pump-probe experiments. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Effect of laser irradiation on the tribological properties of RFsputtered nickel oxide (NiO) thin films

Authors: Srikanth Itapu, Vamsi Borra, Frank X. Li, Pedro Cortes, Mohit Hemanth Kumar

Abstract: The present work aims at investigating the effect of laser irradiation on the tribological properties of RF-sputtered NiO thin films deposited on industrial grade aluminum substrate. A semiconductor laser based on Nd:YAG operating at its 4th harmonic wavelength, lambda = 266 nm with varying laser fluence and spot size of about 5 um is irradiated on the NiO film. The localized heating allows for sm… ▽ More The present work aims at investigating the effect of laser irradiation on the tribological properties of RF-sputtered NiO thin films deposited on industrial grade aluminum substrate. A semiconductor laser based on Nd:YAG operating at its 4th harmonic wavelength, lambda = 266 nm with varying laser fluence and spot size of about 5 um is irradiated on the NiO film. The localized heating allows for smoothening of the NiO film along with contributions to the changes in the stoichiometry of NiO (reduction of excess oxygen). In particular, the effects of tuning laser fluence and the subsequent tribology tests pertaining to the coefficient of friction variations for tribological tests are discussed. △ Less

Submitted 18 November, 2023; originally announced November 2023.

Journal ref: Vacuum 205 (2022): 111461

Terrestrial Very-Long-Baseline Atom Interferometry: Workshop Summary

Authors: Sven Abend, Baptiste Allard, Iván Alonso, John Antoniadis, Henrique Araujo, Gianluigi Arduini, Aidan Arnold, Tobias Aßmann, Nadja Augst, Leonardo Badurina, Antun Balaz, Hannah Banks, Michele Barone, Michele Barsanti, Angelo Bassi, Baptiste Battelier, Charles Baynham, Beaufils Quentin, Aleksandar Belic, Ankit Beniwal, Jose Bernabeu, Francesco Bertinelli, Andrea Bertoldi, Ikbal Ahamed Biswas, Diego Blas , et al. (228 additional authors not shown)

Abstract: This document presents a summary of the 2023 Terrestrial Very-Long-Baseline Atom Interferometry Workshop hosted by CERN. The workshop brought together experts from around the world to discuss the exciting developments in large-scale atom interferometer (AI) prototypes and their potential for detecting ultralight dark matter and gravitational waves. The primary objective of the workshop was to lay… ▽ More This document presents a summary of the 2023 Terrestrial Very-Long-Baseline Atom Interferometry Workshop hosted by CERN. The workshop brought together experts from around the world to discuss the exciting developments in large-scale atom interferometer (AI) prototypes and their potential for detecting ultralight dark matter and gravitational waves. The primary objective of the workshop was to lay the groundwork for an international TVLBAI proto-collaboration. This collaboration aims to unite researchers from different institutions to strategize and secure funding for terrestrial large-scale AI projects. The ultimate goal is to create a roadmap detailing the design and technology choices for one or more km-scale detectors, which will be operational in the mid-2030s. The key sections of this report present the physics case and technical challenges, together with a comprehensive overview of the discussions at the workshop together with the main conclusions. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: Summary of the Terrestrial Very-Long-Baseline Atom Interferometry Workshop held at CERN: https://indico.cern.ch/event/1208783/

Direct Determination of Photonic Stopband Topological Character: A Framework based on Dispersion Measurements

Authors: Nitish Kumar Gupta, Sapireddy Srinivasu, Mukesh Kumar, Anjani Kumar Tiwari, Sudipta Sarkar Pal, Harshawardhan Wanare, S. Anantha Ramakrishna

Abstract: Ascertainment of photonic stopband absolute topological character requires information regarding the Bloch eigenfunction spatial distribution. Consequently, the experimental investigations predominantly restrict themselves to the bulk-boundary correspondence principle and the ensuing emergence of topological surface state. Although capable of establishing the equivalence or inequivalence of bandga… ▽ More Ascertainment of photonic stopband absolute topological character requires information regarding the Bloch eigenfunction spatial distribution. Consequently, the experimental investigations predominantly restrict themselves to the bulk-boundary correspondence principle and the ensuing emergence of topological surface state. Although capable of establishing the equivalence or inequivalence of bandgaps, the determination of their absolute topological identity remains out of its purview. The alternate method of reflection phase-based identification also provides only contentious improvements owing to the measurement complexities pertaining to the interferometric setups. To circumvent these limitations, we resort to the Kramers-Kronig amplitude-phase causality considerations and propose an experimentally conducive method for bandgap topological character determination directly from the parametric reflectance measurements. Particularly, it has been demonstrated that in case of one-dimensional photonic crystals, polarization-resolved dispersion measurements suffice in qualitatively determining bandgap absolute topological identities. By invoking the translational invariance of the investigated samples, we also define a parameter Differential Effective Mass that encapsulates bandgap topological identities and engenders an experimentally discernible bandgap classifier. △ Less

Submitted 27 August, 2023; originally announced August 2023.

Fortaleza: The emergence of a network hub

Authors: Eric Bragion, Habiba Akter, Mohit Kumar, Minxian Xu, Ahmed M. Abdelmoniem, Sukhpal Singh Gill

Abstract: Digitalisation, accelerated by the pandemic, has brought the opportunity for companies to expand their businesses beyond their geographic location and has considerably affected networks around the world. Cloud services have a better acceptance nowadays, and it is foreseen that this industry will grow exponentially in the following years. With more distributed networks that need to support customer… ▽ More Digitalisation, accelerated by the pandemic, has brought the opportunity for companies to expand their businesses beyond their geographic location and has considerably affected networks around the world. Cloud services have a better acceptance nowadays, and it is foreseen that this industry will grow exponentially in the following years. With more distributed networks that need to support customers in different locations, the model of one-single server in big financial centres has become outdated and companies tend to look for alternatives that will meet their needs, and this seems to be the case with Fortaleza, in Brazil. With several submarine cables connections available, the city has stood out as a possible hub to different regions, and this is what this paper explores. Making use of real traffic data through looking glasses, we established a latency classification that ranges from exceptionally low to high and analysed 800 latencies from Roubaix, Fortaleza and Sao Paulo to Miami, Mexico City, Frankfurt, Paris, Milan, Prague, Sao Paulo, Santiago, Buenos Aires and Luanda. We found that non-developed countries have a big dependence on the United States to route Internet traffic. Despite this, Fortaleza proves to be an alternative for serving different regions with relatively low latencies. △ Less

Submitted 28 June, 2023; originally announced July 2023.

Journal ref: Published in Internet of Things and Cyber-Physical Systems, Volume 3, 2023, Pages 272-279

Effect of polymer additives on dynamics of water level in an open channel

Authors: Manish Kumar, Michael D. Graham

Abstract: The presence of a tiny amount of polymers (a few parts per million) in a fluid dramatically reduces turbulent drag. For this reason, polymer additives have been proposed to be used in flood remediation: in an open channel at a fixed flow rate, the decrease in friction due to polymer addition is expected to lead to a decrease in water height in the channel. However, in a recent field experiment, a… ▽ More The presence of a tiny amount of polymers (a few parts per million) in a fluid dramatically reduces turbulent drag. For this reason, polymer additives have been proposed to be used in flood remediation: in an open channel at a fixed flow rate, the decrease in friction due to polymer addition is expected to lead to a decrease in water height in the channel. However, in a recent field experiment, a counterintuitive transient increase in water height has been observed far downstream of polymer injection. We numerically investigate the effect of polymer additives on the water height in a long canal using the shallow water equations augmented with an evolution equation for polymer concentration that incorporates turbulent dispersion and polymer degradation. Just downstream of polymer injection, the water height decreases due to the decreased friction at a fixed volumetric flow rate. Further downstream, however, the height can increase, consistent with the experimental observation. We elucidate the mechanism of this unexpected rise in water height in the canal. We also suggest a technique to mitigate the water rise, as this is detrimental for practical applications. △ Less

Submitted 2 July, 2023; originally announced July 2023.

Highly-Entangled Polyradical Nanographene with Coexisting Strong Correlation and Topological Frustration

Authors: Shaotang Song, Andrés Pinar Solé, Adam Matěj, Guangwu Li, Oleksandr Stetsovych, Diego Soler, Huimin Yang, Mykola Telychko, Jing Li, Manish Kumar, Jiri Brabec, Libor Veis, Jishan Wu, Pavel Jelinek, Jiong Lu

Abstract: Open-shell benzenoid polycyclic aromatic hydrocarbons, known as magnetic nanographenes, exhibit unconventional p-magnetism arising from topological frustration or strong electronic-electron (e-e) interaction. Imprinting multiple strongly entangled spins into polyradical nanographenes creates a major paradigm shift in realizing non-trivial collective quantum behaviors and exotic quantum phases in o… ▽ More Open-shell benzenoid polycyclic aromatic hydrocarbons, known as magnetic nanographenes, exhibit unconventional p-magnetism arising from topological frustration or strong electronic-electron (e-e) interaction. Imprinting multiple strongly entangled spins into polyradical nanographenes creates a major paradigm shift in realizing non-trivial collective quantum behaviors and exotic quantum phases in organic quantum materials. However, conventional design approaches are limited by a single magnetic origin, which can restrict the number of correlated spins or the type of magnetic ordering in open-shell nanographenes. Here, we present a novel design strategy combing topological frustration and e-e interactions to fabricate the largest fully-fused open-shell nanographene reported to date, a 'butterfly'-shaped tetraradical on Au(111). We employed bond-resolved scanning tunneling microscopy and spin excitation spectroscopy to unambiguously resolve the molecular backbone and reveal the strongly correlated open-shell character, respectively. This nanographene contains four unpaired electrons with both ferromagnetic and anti-ferromagnetic interactions, harboring a many-body singlet ground state and strong multi-spin entanglement, which can be well described by many-body calculations. Furthermore, we demonstrate that the nickelocene magnetic probe can sense highly-correlated spin states in nanographene. The ability to imprint and characterize many-body strongly correlated spins in polyradical nanographenes not only presents exciting opportunities for realizing non-trivial quantum magnetism and phases in organic materials but also paves the way toward high-density ultrafast spintronic devices and quantum information technologies. △ Less

Submitted 4 April, 2023; originally announced April 2023.

Comments: 17 pages, 4 figures

Accelerating Particle-in-Cell Kinetic Plasma Simulations via Reduced-Order Modeling of Space-Charge Dynamics using Dynamic Mode Decomposition

Authors: Indranil Nayak, Fernando L. Teixeira, Dong-Yeop Na, Mrinal Kumar, Yuri A. Omelchenko

Abstract: We present a data-driven reduced-order modeling of the space-charge dynamics for electromagnetic particle-in-cell (EMPIC) plasma simulations based on dynamic mode decomposition (DMD). The dynamics of the charged particles in kinetic plasma simulations such as EMPIC is manifested through the plasma current density defined along the edges of the spatial mesh. We showcase the efficacy of DMD in model… ▽ More We present a data-driven reduced-order modeling of the space-charge dynamics for electromagnetic particle-in-cell (EMPIC) plasma simulations based on dynamic mode decomposition (DMD). The dynamics of the charged particles in kinetic plasma simulations such as EMPIC is manifested through the plasma current density defined along the edges of the spatial mesh. We showcase the efficacy of DMD in modeling the time evolution of current density through a low-dimensional feature space. Not only do such DMD-based predictive reduced-order models help accelerate EMPIC simulations, they also have the potential to facilitate investigative analysis and control applications. We demonstrate the proposed DMD-EMPIC scheme for reduced-order modeling of current density, and speed-up in EMPIC simulations involving electron beam under the influence of magnetic field, virtual cathode oscillations, and backward wave oscillator. △ Less

Submitted 2 May, 2024; v1 submitted 28 March, 2023; originally announced March 2023.

Stress and stretching regulate dispersion in viscoelastic porous media flows

Authors: Manish Kumar, Derek M. Walkama, Arezoo M. Ardekani, Jeffrey S. Guasto

Abstract: In this work, we study the role of viscoelastic instability in the mechanical dispersion of fluid flow through porous media at high Peclet numbers. Using microfluidic experiments and numerical simulations, we show that viscoelastic instability in flow through a hexagonally ordered (staggered) medium strongly enhances dispersion transverse to the mean flow direction with increasing Weissenberg numb… ▽ More In this work, we study the role of viscoelastic instability in the mechanical dispersion of fluid flow through porous media at high Peclet numbers. Using microfluidic experiments and numerical simulations, we show that viscoelastic instability in flow through a hexagonally ordered (staggered) medium strongly enhances dispersion transverse to the mean flow direction with increasing Weissenberg number (Wi). In contrast, preferential flow paths can quench the elastic instability in disordered media, which has two important consequences for transport: First, the lack of chaotic velocity fluctuations reduces transverse dispersion relative to unstable flows. Second, the amplification of flow along preferential paths with increasing Wi causes strongly-correlated stream-wise flow that enhances longitudinal dispersion. Finally, we illustrate how the observed dispersion phenomena can be understood through the lens of Lagrangian stretching manifolds, which act as advective transport barriers and coincide with high stress regions in these viscoelastic porous media flows. △ Less

Submitted 20 February, 2023; originally announced February 2023.

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, J. P. Figueiredo de sa Sousa de Almeida, P. G. Dias de Almeida, A. Alpana, M. Alyari, I. Andreev, U. Aras, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Banerjee, P. DeBarbaro, P. Bargassa, D. Barney, F. Beaudette , et al. (435 additional authors not shown)

Abstract: The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med… ▽ More The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data. △ Less

Submitted 27 May, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Comments: Accepted for publication by JINST

Intense multicycle THz pulses generated by laser-produced nanoplasmas

Authors: Manoj Kumar, Hyung Seon Song, Jaeho Lee, Dohyun Park, Hyyung Suk, Min Sup Hur

Abstract: We present a novel scheme to obtain robust, narrowband, and tunable THz emission by using a nano-dimensional overdense plasma target that is irradiated by two counter-propagating detuned laser pulses. So far, no narrowband THz sources with a field strength of GV/m-level have been reported from laser-solid interaction. We report intense THz pulses at beat-frequency ($\simeq$30THz) generated due to… ▽ More We present a novel scheme to obtain robust, narrowband, and tunable THz emission by using a nano-dimensional overdense plasma target that is irradiated by two counter-propagating detuned laser pulses. So far, no narrowband THz sources with a field strength of GV/m-level have been reported from laser-solid interaction. We report intense THz pulses at beat-frequency ($\simeq$30THz) generated due to strong plasma current produced by the beat ponderomotive force in the colliding region, with an unprecedentedly high peak field strength of 11.9GV/m and spectral width $(Δf/f$$\simeq$$5.3\%)$ from 2D PIC simulations. Such an extremely bright narrowband THz source is suitable for various ambitious applications. △ Less

Submitted 26 October, 2022; originally announced October 2022.

Measurement of the cluster position resolution of the Belle II Silicon Vertex Detector

Authors: R. Leboucher, K. Adamczyk, L. Aggarwal, H. Aihara, T. Aziz, S. Bacher, S. Bahinipati, G. Batignani, J. Baudot, P. K. Behera, S. Bettarini, T. Bilka, A. Bozek, F. Buchsteiner, G. Casarosa, L. Corona, T. Czank, S. B. Das, G. Dujany, C. Finck, F. Forti, M. Friedl, A. Gabrielli, E. Ganiev, B. Gobbo , et al. (56 additional authors not shown)

Abstract: The Silicon Vertex Detector (SVD), with its four double-sided silicon strip sensor layers, is one of the two vertex sub-detectors of Belle II operating at SuperKEKB collider (KEK, Japan). Since 2019 and the start of the data taking, the SVD has demonstrated a reliable and highly efficient operation, even running in an environment with harsh beam backgrounds that are induced by the world's highest… ▽ More The Silicon Vertex Detector (SVD), with its four double-sided silicon strip sensor layers, is one of the two vertex sub-detectors of Belle II operating at SuperKEKB collider (KEK, Japan). Since 2019 and the start of the data taking, the SVD has demonstrated a reliable and highly efficient operation, even running in an environment with harsh beam backgrounds that are induced by the world's highest instantaneous luminosity. In order to provide the best quality track reconstruction with an efficient pattern recognition and track fit, and to correctly propagate the uncertainty on the hit's position to the track parameters, it is crucial to precisely estimate the resolution of the cluster position measurement. Several methods for estimating the position resolution directly from the data will be discussed. △ Less

Submitted 7 September, 2022; originally announced September 2022.

Comments: 4 pages, The 30th International Workshop on Vertex Detectors

Journal ref: NIMA, Volume 1033, 2022, 166746

Lagrangian stretching reveals stress topology in viscoelastic flows

Authors: Manish Kumar, Jeffrey S. Guasto, Arezoo M. Ardekani

Abstract: Viscoelastic flows are pervasive in a host of natural and industrial processes, where the emergence of nonlinear and time-dependent dynamics regulate flow resistance, energy consumption, and particulate dispersal. Polymeric stress induced by the advection and stretching of suspended polymers feeds back on the underlying fluid flow, which ultimately dictates the dynamics, instability, and transport… ▽ More Viscoelastic flows are pervasive in a host of natural and industrial processes, where the emergence of nonlinear and time-dependent dynamics regulate flow resistance, energy consumption, and particulate dispersal. Polymeric stress induced by the advection and stretching of suspended polymers feeds back on the underlying fluid flow, which ultimately dictates the dynamics, instability, and transport properties of viscoelastic fluids. However, direct experimental quantification of the stress field is challenging, and a fundamental understanding of how Lagrangian flow structure regulates the distribution of polymeric stress is lacking. In this work, we show that the topology of the polymeric stress field precisely mirrors the Lagrangian stretching field, where the latter depends solely on flow kinematics. We develop a general analytical expression that directly relates the polymeric stress and stretching in weakly viscoelastic fluids for both nonlinear and unsteady flows, which is also extended to special cases characterized by strong kinematics. Furthermore, numerical simulations reveal a clear correlation between the stress and stretching field topologies for unstable viscoelastic flows across a broad range of geometries. Ultimately, our results establish a connection between the Eulerian stress field and the Lagrangian structure of viscoelastic flows. This work provides a simple framework to determine the topology of polymeric stress directly from readily measurable flow field data and lays the foundation for directly linking the polymeric stress to flow transport properties. △ Less

Submitted 15 October, 2022; v1 submitted 23 June, 2022; originally announced June 2022.

Critical behavior of the three-state random-field Potts model in three dimensions

Authors: Manoj Kumar, Varsha Banerjee, Sanjay Puri, Martin Weigel

Abstract: Enormous advances have been made in the past 20 years in our understanding of the random-field Ising model, and there is now consensus on many aspects of its behavior at least in thermal equilibrium. In contrast, little is known about its generalization to the random-field Potts model which has wide-ranging applications. Here we start filling this gap with an investigation of the three-state rando… ▽ More Enormous advances have been made in the past 20 years in our understanding of the random-field Ising model, and there is now consensus on many aspects of its behavior at least in thermal equilibrium. In contrast, little is known about its generalization to the random-field Potts model which has wide-ranging applications. Here we start filling this gap with an investigation of the three-state random-field Potts model in three dimensions. Building on the success of ground-state calculations for the Ising system, we use a recently developed approximate scheme based on graph-cut methods to study the properties of the zero-temperature random fixed point of the system that determines the zero and non-zero temperature transition behavior. We find compelling evidence for a continuous phase transition. Implementing an extensive finite-size scaling (FSS) analysis, we determine the critical exponents and compare them to those of the random-field Ising model. △ Less

Submitted 22 December, 2022; v1 submitted 25 May, 2022; originally announced May 2022.

Comments: RevTeX, 6+5 pages, 4+5 figures, 3+1 tables, version accepted for publication

Journal ref: Phys. Rev. Res. 4, L042041 (2022)

Re-laminarization of elastic turbulence

Authors: M. Vijay Kumar, Atul Varshney, Dongyang Li, Victor Steinberg

Abstract: We report frictional drag reduction and a complete flow re-laminarization of elastic turbulence (ET) at vanishing inertia in a viscoelastic channel flow past an obstacle. We show that intensity of observed elastic waves and wall-normal vorticity correlate well with the measured drag above the ET onset. Moreover, we find that the elastic wave frequency grows with Weissenberg number, and at sufficie… ▽ More We report frictional drag reduction and a complete flow re-laminarization of elastic turbulence (ET) at vanishing inertia in a viscoelastic channel flow past an obstacle. We show that intensity of observed elastic waves and wall-normal vorticity correlate well with the measured drag above the ET onset. Moreover, we find that the elastic wave frequency grows with Weissenberg number, and at sufficiently high frequency it causes decay of the elastic waves, resulting in ET attenuation and drag reduction. Thus, this allows us to substantiate a physical mechanism, involving interaction of elastic waves with wall-normal vorticity fluctuations, leading to the drag reduction and re-laminarization phenomena at low Reynolds number. △ Less

Submitted 25 May, 2022; originally announced May 2022.

Comments: 5 figures, Supplemental Material

Journal ref: Phys. Rev. Fluids 7, L081301 (2022)

Quasi-exact ground-state algorithm for the random-field Potts model

Authors: Manoj Kumar, Martin Weigel

Abstract: The use of combinatorial optimization algorithms has contributed substantially to the major progress that has occurred in recent years in the understanding of the physics of disordered systems, such as the random-field Ising model. While for this system exact ground states can be computed efficiently in polynomial time, the related random-field Potts model is {\em NP\} hard computationally. While… ▽ More The use of combinatorial optimization algorithms has contributed substantially to the major progress that has occurred in recent years in the understanding of the physics of disordered systems, such as the random-field Ising model. While for this system exact ground states can be computed efficiently in polynomial time, the related random-field Potts model is {\em NP\} hard computationally. While thus exact ground states cannot be computed for large systems in this case, approximation schemes based on graph cuts and related techniques can be used. Here we show how a combination of such methods with repeated runs allows for a systematic extrapolation of relevant system properties to the ground state. The method is benchmarked on a special class of disorder samples for which exact ground states are available. △ Less

Submitted 25 April, 2022; originally announced April 2022.

Comments: 9 pages, 9 figures, 1 table

Revealing the Charge Transfer Dynamics Between Singlet Fission Molecule and Hybrid Perovskite Nanocrystals

Authors: Tejasvini Sharma, Saurav Saini, Naveen Kumar Tailor, Mahesh Kumar, Soumitra Satapathi

Abstract: Singlet fission process has gained considerable attention because of its potential to enhance photovoltaic efficiency and break the Shockley Queisser limit. In photovoltaic devices perovskite materials have shown tremendous progress in the last decade. Therefore combining the singlet fission materials in perovskite devices can lead to a drastic enhancement in their performance. To reveal the appli… ▽ More Singlet fission process has gained considerable attention because of its potential to enhance photovoltaic efficiency and break the Shockley Queisser limit. In photovoltaic devices perovskite materials have shown tremendous progress in the last decade. Therefore combining the singlet fission materials in perovskite devices can lead to a drastic enhancement in their performance. To reveal the applicability of singlet fission processes in perovskite materials we have investigated the charge transfer dynamics from an SF active material 910 bis phenylethynyl anthracene to CH3NH3PbBr3 perovskite nanocrystals using the transient absorption spectroscopy. We observed a significant charge transfer from the coupled triplet state of BPEA to conduction band of CH3NH3PbBr3 in picosecond timescale. The observation of shortened lifetime in a mixture of BPEA and CH3NH3PbBr3 nanocrytals confirms the significant charge transfer between these systems. Our study reveals the charge transfer mechanism in singlet fission perovskite composite which will help to develop an advanced photovoltaic system. △ Less

Submitted 5 April, 2022; originally announced April 2022.

A Strategic Approach to Advance Magnet Technology for Next Generation Colliders

Authors: G. Ambrosio, K. Amm, M. Anerella, G. Apollinari, D. Arbelaez, B. Auchmann, S. Balachandran, M. Baldini, A. Ballarino, S. Barua, E. Barzi, A. Baskys, C. Bird, J. Boerme, E. Bosque, L. Brouwer, S. Caspi, N. Cheggour, G. Chlachidze, L. Cooley, D. Davis, D. Dietderich, J. DiMarco, L. English, L. Garcia Fajardo , et al. (52 additional authors not shown)

Abstract: Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the domi… ▽ More Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the dominant cost driver for future collider facilities. As the community considers opportunities to explore new energy frontiers, the importance of advanced magnet technology - both in terms of magnet performance and in the magnet technology's potential for cost reduction - is evident, as the technology status is essential for informed decisions on targets for physics reach and facility feasibility. △ Less

Submitted 26 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Common Coil Dipole for High Field Magnet Design and R&D

Authors: Ramesh Gupta, Kathleen Amm, Julien Avronsart, Michael Anerella, Anis Ben Yahia, John Cozzolino, Piyush Joshi, Mithlesh Kumar, Febin Kurian, Chris Runyan, William Sampson, Jesse Schmalzle, Stephan Kahn, Ronald Scanlan, Robert Weggel, Erich Willen, Qingjin Xu, Javier Munilla, Fernando Toral, Paolo Ferracin, Steve Gourlay, GianLuca Sabbi, Xiaorong Wang, Danko van der Laan, Jeremy Weiss

Abstract: The common coil geometry provides an alternate design to the conventional cosine theta dipoles. It allows a wider range of conductor and magnet technologies. It also facilitates a low-cost, rapid-turn-around design and R&D program. Recent studies carried out as a part of the US Magnet Development Program revealed that at high fields (20 T with 15% operating margin or more), the common coil design… ▽ More The common coil geometry provides an alternate design to the conventional cosine theta dipoles. It allows a wider range of conductor and magnet technologies. It also facilitates a low-cost, rapid-turn-around design and R&D program. Recent studies carried out as a part of the US Magnet Development Program revealed that at high fields (20 T with 15% operating margin or more), the common coil design also uses significantly less conductor (particularly much less HTS), as compared to that in the other designs. △ Less

Submitted 16 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021. Accelerator Technology (AF7)

REBCO -- a silver bullet for our next high-field magnet and collider budget?

Authors: Xiaorong Wang, Anis Ben Yahia, Ernesto Bosque, Paolo Ferracin, Stephen Gourlay, Ramesh Gupta, Hugh Higley, Vadim Kashikhin, Mithlesh Kumar, Vito Lombardo, Maxim Marchevsky, Reed Teyber, Sofia Viarengo

Abstract: High-field superconducting magnets with a dipole field of 16 T and above enable future energy-frontier circular particle colliders. Although we believe these magnets can be built, none exists today. They can also be a showstopper for future high-energy machines due to a prohibitively high price tag based on the current conductor and magnet fabrication cost. The high-temperature superconducting REB… ▽ More High-field superconducting magnets with a dipole field of 16 T and above enable future energy-frontier circular particle colliders. Although we believe these magnets can be built, none exists today. They can also be a showstopper for future high-energy machines due to a prohibitively high price tag based on the current conductor and magnet fabrication cost. The high-temperature superconducting REBCO coated conductor can address both the technical and cost issues, a silver bullet to lay both monsters to rest. The challenges and unknowns, however, can be too arduous to make the silver bullet. We lay out a potential road forward and suggest key action items. As a contribution from the accelerator community, we attempt to clarify for our theorist and experimenter colleagues a few aspects about the future high-field superconducting magnets. We hope to stimulate an effective plan for the 2023 P5 process that can lead to a cost-effective high-field magnet technology for future colliders and the exciting physics they can steward. △ Less

Submitted 21 March, 2022; v1 submitted 16 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021. Additional typos corrected; references updated with hyperlinks

Machine learning assisted modeling of thermohydraulic correlations for heat exchangers with twisted tape inserts

Authors: J. P. Panda, B. Kumar, A. K. Patil, M. Kumar

Abstract: This article presents the application of machine learning (ML) algorithms in modeling of the heat transfer correlations (e.g. Nusselt number and friction factor) for a heat exchanger with twisted tape inserts. The experimental data for the heat exchanger at different Reynolds numbers and twist ratios were used for the correlation modeling. Three machine learning algorithms: Polynomial Regression (… ▽ More This article presents the application of machine learning (ML) algorithms in modeling of the heat transfer correlations (e.g. Nusselt number and friction factor) for a heat exchanger with twisted tape inserts. The experimental data for the heat exchanger at different Reynolds numbers and twist ratios were used for the correlation modeling. Three machine learning algorithms: Polynomial Regression (PR), Random Forest (RF), and Artificial Neural Network (ANN) were used in the data-driven surrogate modeling. The hyperparameters of the ML models are carefully optimized to ensure generalizability. The performance parameters (e. g. $R^2$ and $MSE$) of different ML algorithms are analyzed. It was observed that the ANN predictions of heat transfer coefficients outperform the predictions of PR and RF across different test datasets. Based on our analysis we make recommendations for future data-driven modeling efforts of heat transfer correlations and similar studies. △ Less

Submitted 2 February, 2022; originally announced February 2022.

Cold Atoms in Space: Community Workshop Summary and Proposed Road-Map

Authors: Ivan Alonso, Cristiano Alpigiani, Brett Altschul, Henrique Araujo, Gianluigi Arduini, Jan Arlt, Leonardo Badurina, Antun Balaz, Satvika Bandarupally, Barry C Barish Michele Barone, Michele Barsanti, Steven Bass, Angelo Bassi, Baptiste Battelier, Charles F. A. Baynham, Quentin Beaufils, Aleksandar Belic, Joel Berge, Jose Bernabeu, Andrea Bertoldi, Robert Bingham, Sebastien Bize, Diego Blas, Kai Bongs, Philippe Bouyer , et al. (224 additional authors not shown)

Abstract: We summarize the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, a… ▽ More We summarize the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, and atom interferometers. Prospective applications include metrology, geodesy and measurement of terrestrial mass change due to, e.g., climate change, and fundamental science experiments such as tests of the equivalence principle, searches for dark matter, measurements of gravitational waves and tests of quantum mechanics. We review the current status of cold atom technologies and outline the requirements for their space qualification, including the development paths and the corresponding technical milestones, and identifying possible pathfinder missions to pave the way for missions to exploit the full potential of cold atoms in space. Finally, we present a first draft of a possible road-map for achieving these goals, that we propose for discussion by the interested cold atom, Earth Observation, fundamental physics and other prospective scientific user communities, together with ESA and national space and research funding agencies. △ Less

Submitted 19 January, 2022; originally announced January 2022.

Comments: Summary of the Community Workshop on Cold Atoms in Space and corresponding Road-map: https://indico.cern.ch/event/1064855/

Journal ref: EPJ Quantum Technol. 9, 30 (2022)

Investigating the theoretical performance of Cs$_2$TiBr$_6$-based perovskite solar cell with La-doped BaSnO$_3$ and CuSbS$_2$ as the charge transport layers

Authors: Kumar Shivesh, Intekhab Alam, A. K. Kushwaha, Manish Kumar, S. V. Singh

Abstract: A lead-free, completely inorganic, and non-toxic Cs2TiBr6-based double perovskite solar cell (PSC) was simulated via SCAPS 1-D. La-doped BaSnO3 (LBSO) was applied as the electron transport layer (ETL) unprecedentedly in the simulation study of PSCs, while CuSbS2 was utilized as the hole transport layer (HTL). wxAMPS was used to validate the results of SCAPS simulations. Moreover, the first-princip… ▽ More A lead-free, completely inorganic, and non-toxic Cs2TiBr6-based double perovskite solar cell (PSC) was simulated via SCAPS 1-D. La-doped BaSnO3 (LBSO) was applied as the electron transport layer (ETL) unprecedentedly in the simulation study of PSCs, while CuSbS2 was utilized as the hole transport layer (HTL). wxAMPS was used to validate the results of SCAPS simulations. Moreover, the first-principle density function theory (DFT) calculations were performed for validating the 1.6 eV bandgap of the Cs2TiBr6 absorber. To enhance the device performance, we analyzed and optimized various parameters of the PSC using SCAPS. The optimum thickness, defect density, and bandgap of the absorber were 1000 nm, 1013 cm-3, and 1.4 eV, respectively. Furthermore, the optimum thickness, hole mobility, and electron affinity of the HTL were 400 nm, 102 cm2V-1s-1, and 4.1 eV, respectively. However, the ETL thickness had a negligible effect on the device's efficiency. The optimized values of doping density for the absorber layer, HTL, and ETL were 1015, 1020, and 1021 cm-3, respectively. Herein, the effect of different HTLs was analyzed by matching up the built-in voltage (Vbi) in respect of the open-circuit voltage (VOC). It was found that the Vbi was directly proportional to the VOC, and CuSbS2 was the champion in terms of efficiency for the PSC. The optimum work function of metal contact and temperature of the PSC were 5.9 eV and 300 K, respectively. After the final optimization, the device achieved an exhilarating PCE of 29.13%. △ Less

Submitted 29 November, 2021; originally announced November 2021.

Comments: 44 pages, 23 figures

The Silicon Vertex Detector of the Belle II Experiment

Authors: G. Dujany, K. Adamczyk, L. Aggarwal, H. Aihara, T. Aziz, S. Bacher, S. Bahinipati, G. Batignani, J. Baudot, P. K. Behera, S. Bettarini, T. Bilka, A. Bozek, F. Buchsteiner, G. Casarosa, L. Corona, T. Czank, S. B. Das, C. Finck, F. Forti, M. Friedl, A. Gabrielli, E. Ganiev, B. Gobbo, S. Halder , et al. (56 additional authors not shown)

Abstract: In 2019 the Belle II experiment started data taking at the asymmetric SuperKEKB collider (KEK, Japan) operating at the Y(4S) resonance. Belle II will search for new physics beyond the Standard Model by collecting an integrated luminosity of 50~ab$^{-1}$. The silicon vertex detector (SVD), consisting of four layers of double-sided silicon strip sensors, is one of the two vertex sub-detectors. The S… ▽ More In 2019 the Belle II experiment started data taking at the asymmetric SuperKEKB collider (KEK, Japan) operating at the Y(4S) resonance. Belle II will search for new physics beyond the Standard Model by collecting an integrated luminosity of 50~ab$^{-1}$. The silicon vertex detector (SVD), consisting of four layers of double-sided silicon strip sensors, is one of the two vertex sub-detectors. The SVD extrapolates the tracks to the inner pixel detector (PXD) with enough precision to correctly identify hits in the PXD belonging to the track. In addition the SVD has standalone tracking capability and utilizes ionization to enhance particle identification in the low momentum region. The SVD is operating reliably and with high efficiency, despite exposure to the harsh beam background of the highest peak-luminosity collider ever built. High signal-to-noise ratio and hit efficiency have been measured, as well as the spatial resolution; all these quantities show excellent stability over time. Data-simulation agreement on cluster properties has recently been improved through a careful tuning of the simulation. The precise hit-time resolution can be exploited to reject out-of-time hits induced by beam background, which will make the SVD more robust against higher levels of background. During the first three years of running, radiation damage effects on strip noise, sensor currents and depletion voltage have been observed, as well as some coupling capacitor failure due to intense radiation bursts. None of these effects cause significant degradation in the detector performance. △ Less

Submitted 18 March, 2022; v1 submitted 26 November, 2021; originally announced November 2021.

Comments: 7 pages, 5 figures, proceedings contribution at the 12th International Conference on Position Sensitive Detectors

Skillful Twelve Hour Precipitation Forecasts using Large Context Neural Networks

Authors: Lasse Espeholt, Shreya Agrawal, Casper Sønderby, Manoj Kumar, Jonathan Heek, Carla Bromberg, Cenk Gazen, Jason Hickey, Aaron Bell, Nal Kalchbrenner

Abstract: The problem of forecasting weather has been scientifically studied for centuries due to its high impact on human lives, transportation, food production and energy management, among others. Current operational forecasting models are based on physics and use supercomputers to simulate the atmosphere to make forecasts hours and days in advance. Better physics-based forecasts require improvements in t… ▽ More The problem of forecasting weather has been scientifically studied for centuries due to its high impact on human lives, transportation, food production and energy management, among others. Current operational forecasting models are based on physics and use supercomputers to simulate the atmosphere to make forecasts hours and days in advance. Better physics-based forecasts require improvements in the models themselves, which can be a substantial scientific challenge, as well as improvements in the underlying resolution, which can be computationally prohibitive. An emerging class of weather models based on neural networks represents a paradigm shift in weather forecasting: the models learn the required transformations from data instead of relying on hand-coded physics and are computationally efficient. For neural models, however, each additional hour of lead time poses a substantial challenge as it requires capturing ever larger spatial contexts and increases the uncertainty of the prediction. In this work, we present a neural network that is capable of large-scale precipitation forecasting up to twelve hours ahead and, starting from the same atmospheric state, the model achieves greater skill than the state-of-the-art physics-based models HRRR and HREF that currently operate in the Continental United States. Interpretability analyses reinforce the observation that the model learns to emulate advanced physics principles. These results represent a substantial step towards establishing a new paradigm of efficient forecasting with neural networks. △ Less

Submitted 14 November, 2021; originally announced November 2021.

Comments: 34 pages

On-chip Nanophotonic Broadband Wavelength Detector with 2D-Electron Gas

Authors: Vishal Kaushik, Swati Rajput, Sulabh Srivastav, Lalit Singh, Prem Babu, Elham Heidari, Moustafa Ahmed, Yas Al-Hadeethi, Hamed Dalir, Volker J. Sorger, Mukesh Kumar

Abstract: Miniaturized, low-cost wavelength detectors are gaining enormous interest as we step into the new age of photonics. Incompatibility with integrated circuits or complex fabrication requirement in most of the conventionally used filters necessitates the development of a simple, on-chip platform for easy-to-use wavelength detection system. Also, intensity fluctuations hinder precise, noise free detec… ▽ More Miniaturized, low-cost wavelength detectors are gaining enormous interest as we step into the new age of photonics. Incompatibility with integrated circuits or complex fabrication requirement in most of the conventionally used filters necessitates the development of a simple, on-chip platform for easy-to-use wavelength detection system. Also, intensity fluctuations hinder precise, noise free detection of spectral information. Here we propose a novel approach of utilizing wavelength sensitive photocurrent across semiconductor heterojunctions to experimentally validate broadband wavelength detection on an on-chip platform with simple fabrication process. The proposed device utilizes linear frequency response of internal photoemission via 2-D electron gas in a ZnO based heterojunction along with a reference junction for coherent common mode rejection. We report sensitivity of 0.96 uA/nm for a broad wavelength-range of 280 nm from 660-940 nm. Simple fabrication process, efficient intensity noise cancelation along with heat resistance and radiation hardness of ZnO makes the proposed platform simple, low-cost and efficient alternative for several applications such as optical spectrometers, sensing and IOTs. △ Less

Submitted 4 November, 2021; originally announced November 2021.

Comments: 9 pages, 4 figures

Mid-Infrared Photon-Pair Generation in AgGaS$_2$

Authors: Mohit Kumar, Pawan Kumar, Andres Vega, Maximilian A. Weissflog, Thomas Pertsch, Frank Setzpfandt

Abstract: We demonstrate non-degenerate photon-pair generation by spontaneous parametric down conversion in a silver gallium sulfide AgGaS$_2$ crystal. By tuning the pump wavelength, we achieve phase matching over a large spectral range. This allows to generate idler photons in the mid-infrared spectral range above 6 $μm$ wavelength with corresponding signal photons in the visible. Also, we show photon pair… ▽ More We demonstrate non-degenerate photon-pair generation by spontaneous parametric down conversion in a silver gallium sulfide AgGaS$_2$ crystal. By tuning the pump wavelength, we achieve phase matching over a large spectral range. This allows to generate idler photons in the mid-infrared spectral range above 6 $μm$ wavelength with corresponding signal photons in the visible. Also, we show photon pair generation with broad spectral bandwidth. These results are a valuable step towards the development of quantum imaging and sensing techniques in the mid-infrared. △ Less

Submitted 11 October, 2021; v1 submitted 4 October, 2021; originally announced October 2021.

D retention and material defects probed using Raman microscopy in JET limiter samples and beryllium-based synthesized samples

Authors: C Pardanaud, M Kumar, P Roubin, C Martin, Y Ferro, J Denis, A Widdowson, D Douai, M Baldwin, A Založnik, C Lungu, C Porosnicu, P Dinca, T Dittmar, A Hakola

Abstract: We report on the detection by means of Raman spectroscopy of amorphous beryllium deuteride, BeD 2 , in magnetron sputtered deposits synthesized in two different laboratories and containing about 20 at.% of deuterium. In contrast, this signature has not been found for the JET limiter samples studied coming from the inner, outer or upper limiters, even when coming from a deposition zone of the limit… ▽ More We report on the detection by means of Raman spectroscopy of amorphous beryllium deuteride, BeD 2 , in magnetron sputtered deposits synthesized in two different laboratories and containing about 20 at.% of deuterium. In contrast, this signature has not been found for the JET limiter samples studied coming from the inner, outer or upper limiters, even when coming from a deposition zone of the limiters. We give a way to disentangle that BeD 2 signature from other signatures falling in the same spectroscopic range and mainly related to other phenomena. We also analyze the Raman characteristics of the JET sample defects. These results could help in the interpretation of D thermal desorption spectra and in future analyses of JET thick Be deposit divertor tiles. △ Less

Submitted 30 September, 2021; originally announced September 2021.

Journal ref: Physica Scripta, IOP Publishing, 2021, 96 (12), pp.124031

Evidence for Critical Internal heat values during Significant Geophysical Transitions in the Inner Solar System Planetary bodies in association with Volcanism

Authors: Varnana. M. Kumar, T. E. Girish, Thara. N. Sathyan, Biju Longhinos, Anjana AV Panicker, Binoy. J

Abstract: We found evidence for critical internal heat values during significant geophysical transitions in the inner solar system planetary bodies in association with volcanism. From a simple rocky planet thermal evolution model, we could infer critical surface heat flux values during peak phases (~1.2 W/m2) and cessation phases (~ 0.092 W/m2) of major volcanism in Earth, Moon, Mars, Venus and Mercury. The… ▽ More We found evidence for critical internal heat values during significant geophysical transitions in the inner solar system planetary bodies in association with volcanism. From a simple rocky planet thermal evolution model, we could infer critical surface heat flux values during peak phases (~1.2 W/m2) and cessation phases (~ 0.092 W/m2) of major volcanism in Earth, Moon, Mars, Venus and Mercury. The above phases of volcanism are accompanied by significant geophysical transitions like growth and decay of global planetary magnetic fields which is likely to be related to systematic changes in core-mantle boundary heat flux values. The above results suggest the that planets are possibly self-organised physical systems with strong core-mantle-crust coupling . The present study will have implications on the search for habitable extrasolar planets. △ Less

Submitted 26 January, 2021; originally announced May 2021.

Comments: 12 Pages, 1 Figure and 4 Tables