-
Semi-Analytical Modeling of Transient Stream Drawdown and Depletion in Response to Aquifer Pumping
Authors:
Bwalya Malama,
Ying-Fan Lin,
Kristopher L. Kuhlman
Abstract:
Analytical and semi-analytical models for stream depletion with transient stream stage drawdown induced by groundwater pumping are developed to address a deficiency in existing models, namely, the use of a fixed stream stage condition at the stream-aquifer interface. Field data are presented to demonstrate that stream stage drawdown does indeed occur in response to groundwater pumping near aquifer…
▽ More
Analytical and semi-analytical models for stream depletion with transient stream stage drawdown induced by groundwater pumping are developed to address a deficiency in existing models, namely, the use of a fixed stream stage condition at the stream-aquifer interface. Field data are presented to demonstrate that stream stage drawdown does indeed occur in response to groundwater pumping near aquifer connected streams. A model that predicts stream depletion with transient stream drawdown is developed, based on stream channel mass conservation and finite stream channel storage. The resulting models are shown to reduce to existing fixed-stage models in the limit as stream channel storage becomes infinitely large, and to the confined aquifer flow with a no-flow boundary at the streambed in the limit as stream storage becomes vanishingly small. The model is applied to field measurements of aquifer and stream drawdown, giving estimates of aquifer hydraulic parameters, streambed conductance and a measure of stream channel storage. The results of the modeling and data analysis presented herein have implications for sustainable groundwater management.
△ Less
Submitted 16 July, 2024;
originally announced July 2024.
-
Generalized Solution for Double-Porosity Flow through a Graded Excavation Damaged Zone
Authors:
Kristopher L. Kuhlman
Abstract:
Prediction of flow to boreholes or excavations in fractured low-permeability rocks is important for resource extraction and disposal or sequestration activities. Analytical solutions for fluid pressure and flowrate, when available, are powerful, insightful, and efficient tools enabling parameter estimation and uncertainty quantification. A flexible porous media flow solution for arbitrary physical…
▽ More
Prediction of flow to boreholes or excavations in fractured low-permeability rocks is important for resource extraction and disposal or sequestration activities. Analytical solutions for fluid pressure and flowrate, when available, are powerful, insightful, and efficient tools enabling parameter estimation and uncertainty quantification. A flexible porous media flow solution for arbitrary physical dimension is derived and extended to double porosity for converging radial flow when permeability and porosity decrease radially as a power law away from a borehole or opening. This distribution can arise from damage accumulation due to stress relief associated with drilling or mining. The single-porosity graded conductivity solution was initially found for heat conduction, the arbitrary dimension flow solution comes from hydrology, and the solution with both arbitrary dimension and graded permeability distribution appeared in reservoir engineering. These existing solutions are here combined and extended to two implementations of the double-porosity conceptual model, for both a simpler thin-film mass transfer and more physically realistic diffusion between fracture and matrix. This work presents a new specified-flowrate solution with wellbore storage for the simpler double-porosity model, and a new more physically realistic solution for any wellbore boundary condition. A new closed-form expression is derived for the matrix diffusion solution (applicable to both homogeneous and graded problems), improving on previous infinite series expressions.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
Analytical Solution and Parameter Estimation for Heat of Wetting and Vapor Adsorption During Spontaneous Imbibition in Tuff
Authors:
Forest T. Good,
Kristopher L. Kuhlman,
Tara C. LaForce,
Matthew J. Paul,
Jason E. Heath
Abstract:
An analytical expression is derived for the thermal response observed during spontaneous imbibition of water into a dry core of zeolitic tuff. Sample tortuosity, thermal conductivity, and thermal source strength are estimated from fitting an analytical solution to temperature observations during a single laboratory test. The closed-form analytical solution is derived using Green's functions for he…
▽ More
An analytical expression is derived for the thermal response observed during spontaneous imbibition of water into a dry core of zeolitic tuff. Sample tortuosity, thermal conductivity, and thermal source strength are estimated from fitting an analytical solution to temperature observations during a single laboratory test. The closed-form analytical solution is derived using Green's functions for heat conduction in the limit of "slow" water movement; that is, when advection of thermal energy with the wetting front is negligible. The solution has four free fitting parameters and is efficient for parameter estimation. Laboratory imbibition data used to constrain the model include a time series of the mass of water imbibed, visual location of the wetting front through time, and temperature time series at six locations. The thermal front reached the end of the core hours before the visible wetting front. Thus, the predominant form of heating during imbibition in this zeolitic tuff is due to vapor adsorption in dry zeolitic rock ahead of the wetting front. The separation of the wetting front and thermal front in this zeolitic tuff is significant, compared to wetting front behavior of most materials reported in the literature. This work is the first interpretation of a thermal imbibition response to estimate transport (tortuosity) and thermal properties (including thermal conductivity) from a single laboratory test.
△ Less
Submitted 7 January, 2023;
originally announced February 2023.
-
Uncoupling electrokinetic flow solutions
Authors:
Kristopher L. Kuhlman,
Bwalya Malama
Abstract:
The continuum-scale electrokinetic porous-media flow and excess charge redistribution equations are uncoupled using eigenvalue decomposition. The uncoupling results in a pair of independent diffusion equations for "intermediate" potentials subject to modified material properties and boundary conditions. The fluid pressure and electrostatic potential are then found by recombining the solutions to t…
▽ More
The continuum-scale electrokinetic porous-media flow and excess charge redistribution equations are uncoupled using eigenvalue decomposition. The uncoupling results in a pair of independent diffusion equations for "intermediate" potentials subject to modified material properties and boundary conditions. The fluid pressure and electrostatic potential are then found by recombining the solutions to the two intermediate uncoupled problems in a matrix-vector multiply. Expressions for the material properties or source terms in the intermediate uncoupled problem may require extended precision or careful re-writing to avoid numerical cancellation, but the solutions themselves can be computed in typical double precision. The approach works with analytical or gridded numerical solutions and is illustrated through two examples. The solution for flow to a pumping well is manipulated to predict streaming potential and electroosmosis, and a periodic one-dimensional analytical solution is derived and used to predict electroosmosis and streaming potential in a laboratory flow cell subjected to low frequency alternating current and pressure excitation. The examples illustrate the utility of the eigenvalue decoupling approach, repurposing existing analytical solutions and leveraging simpler-to-derive solutions or numerical models for coupled physics.
△ Less
Submitted 28 August, 2020;
originally announced August 2020.
-
Modeling Dynamic Helium Release as a Tracer of Rock Deformation
Authors:
W. Payton Gardner,
Stephen J. Bauer,
Kristopher L. Kuhlman,
Jason E. Heath
Abstract:
We use helium released during mechanical deformation of shales as a signal to explore the effects of deformation and failure on material transport properties. A dynamic dual-permeability model with evolving pore and fracture networks is used to simulate gases released from shale during deformation and failure. Changes in material properties required to reproduce experimentally observed gas signals…
▽ More
We use helium released during mechanical deformation of shales as a signal to explore the effects of deformation and failure on material transport properties. A dynamic dual-permeability model with evolving pore and fracture networks is used to simulate gases released from shale during deformation and failure. Changes in material properties required to reproduce experimentally observed gas signals are explored. We model two different experiments of $^4$He flow rate measured from shale undergoing mechanical deformation, a core parallel to bedding and a core perpendicular to bedding. We find that the helium signal is sensitive to fracture development and evolution as well as changes in the matrix transport properties. We constrain the timing and effective fracture aperture, as well as the increase in matrix porosity and permeability. Increases in matrix permeability are required to explain gas flow prior to macroscopic failure, and the short-term gas flow post failure. Increased matrix porosity, is required to match the long-term, post-failure gas flow. Our model provides the first quantitative interpretation of helium release as a result of mechanical deformation. The sensitivity of this model to changes in the fracture network, as well as to matrix properties during deformation, indicates that helium release can be used as a quantitative tool to evaluate the state of stress and strain in earth materials.
△ Less
Submitted 11 October, 2017;
originally announced October 2017.
-
Deep borehole disposal of nuclear waste: US perspective
Authors:
Patrick V. Brady,
Geoffrey A. Freeze,
Kristopher L. Kuhlman,
Ernest L. Hardin,
David C. Sassani,
Robert J. MacKinnon
Abstract:
Radioactive waste disposal in deep boreholes may be more "ready" than disposal in mined geologic repositories since mankind has greater experience operating small deep holes - boreholes, than big shallow holes - mines. There are several thousand precedents for constructing >2 km deep boreholes and several hundred precedents for disposing long-lived wastes in boreholes. Borehole disposal is likely…
▽ More
Radioactive waste disposal in deep boreholes may be more "ready" than disposal in mined geologic repositories since mankind has greater experience operating small deep holes - boreholes, than big shallow holes - mines. There are several thousand precedents for constructing >2 km deep boreholes and several hundred precedents for disposing long-lived wastes in boreholes. Borehole disposal is likely to be faster, cheaper, and more flexible than mined disposal, while also offering greater long-term isolation. Isolation would rely on the great depth, water density gradients, and reducing conditions to prevent vertical movement of waste up the borehole.
△ Less
Submitted 18 July, 2017;
originally announced July 2017.
-
Anthropogenic influences on groundwater in the vicinity of a long-lived radioactive waste repository
Authors:
Matthew A. Thomas,
Kristopher L. Kuhlman,
Anderson L. Ward
Abstract:
The groundwater flow system in the Culebra Dolomite Member (Culebra) of the Permian Rustler Formation is a potential radionuclide release pathway from the Waste Isolation Pilot Plant (WIPP), the only deep geological repository for transuranic waste in the United States. In early conceptual models of the Culebra, groundwater levels were not expected to fluctuate markedly, except in response to long…
▽ More
The groundwater flow system in the Culebra Dolomite Member (Culebra) of the Permian Rustler Formation is a potential radionuclide release pathway from the Waste Isolation Pilot Plant (WIPP), the only deep geological repository for transuranic waste in the United States. In early conceptual models of the Culebra, groundwater levels were not expected to fluctuate markedly, except in response to long-term climatic changes, with response times on the order of hundreds to thousands of years. Recent groundwater pressures measured in monitoring wells record more than 25 m of drawdown. The fluctuations are attributed to pumping activities at a privately-owned well that may be associated with the demand of the Permian Basin hydrocarbon industry for water. The unprecedented magnitude of drawdown provides an opportunity to quantitatively assess the influence of unplanned anthropogenic forcings near the WIPP. Spatially variable realizations of Culebra saturated hydraulic conductivity and storativity were used to develop groundwater flow models to estimate a pumping rate for the private well and investigate its effect on advective transport. Simulated drawdown shows reasonable agreement with observations (average Model Efficiency coefficient = 0.7). Steepened hydraulic gradients associated with the pumping reduce estimates of conservative particle travel times across the domain by one-half and shift the intersection of the average particle track with the compliance boundary by more than two kilometers. The value of the transient simulations conducted for this study lie in their ability to (i) improve understanding of the Culebra groundwater flow system and (ii) challenge the notion of time-invariant land use in the vicinity of the WIPP.
△ Less
Submitted 1 May, 2017;
originally announced May 2017.
-
Modeling cross-hole slug tests in an unconfined aquifer
Authors:
Bwalya Malama,
Kristopher L. Kuhlman,
Ralf Brauchler,
Peter Bayer
Abstract:
A modified version of a published slug test model for unconfined aquifers is applied to cross-hole slug test data collected in field tests conducted at the Widen site in Switzerland. The model accounts for water-table effects using the linearised kinematic condition. The model also accounts for inertial effects in source and observation wells. The primary objective of this work is to demonstrate a…
▽ More
A modified version of a published slug test model for unconfined aquifers is applied to cross-hole slug test data collected in field tests conducted at the Widen site in Switzerland. The model accounts for water-table effects using the linearised kinematic condition. The model also accounts for inertial effects in source and observation wells. The primary objective of this work is to demonstrate applicability of this semi-analytical model to multi-well and multi-level pneumatic slug tests. The pneumatic perturbation was applied at discrete intervals in a source well and monitored at discrete vertical intervals in observation wells. The source and observation well pairs were separated by distances of up to 4 m. The analysis yielded vertical profiles of hydraulic conductivity, specific storage, and specific yield at observation well locations. The hydraulic parameter estimates are compared to results from prior pumping and single-well slug tests conducted at the site, as well as to estimates from particle size analyses of sediment collected from boreholes during well installation. The results are in general agreement with results from prior tests and are indicative of a sand and gravel aquifer. Sensitivity analysis show that model identification of specific yield is strongest at late-time. However, the usefulness of late-time data is limited due to the low signal-to-noise ratios.
△ Less
Submitted 7 July, 2016;
originally announced July 2016.
-
Multiporosity Flow in Fractured Low-Permeability Rocks
Authors:
Kristopher L. Kuhlman,
Bwalya Malama,
Jason E. Heath
Abstract:
A multiporosity extension of classical double and triple porosity fractured rock flow models for slightly compressible fluids is presented. The multiporosity model is an adaptation of the multirate solute transport model of Haggerty and Gorelick (1995) to viscous flow in fractured rock reservoirs. It is a generalization of both pseudo-steady-state and transient interporosity flow double porosity m…
▽ More
A multiporosity extension of classical double and triple porosity fractured rock flow models for slightly compressible fluids is presented. The multiporosity model is an adaptation of the multirate solute transport model of Haggerty and Gorelick (1995) to viscous flow in fractured rock reservoirs. It is a generalization of both pseudo-steady-state and transient interporosity flow double porosity models. The model includes a fracture continuum and an overlapping distribution of multiple rock matrix continua, whose fracture-matrix exchange coefficients are specified through a discrete probability mass function. Semi-analytical cylindrically symmetric solutions to the multiporosity mathematical model are developed using the Laplace transform to illustrate its behavior. The multiporosity model presented here is conceptually simple, yet flexible enough to simulate common conceptualizations of double and triple porosity flow. This combination of generality and simplicity makes the multiporosity model a good choice for flow in low-permeability fractured rocks.
△ Less
Submitted 18 January, 2015;
originally announced February 2015.
-
Core-scale solute transport model selection using Monte Carlo analysis
Authors:
Bwalya Malama,
Kristopher L. Kuhlman,
Scott C. James
Abstract:
Model applicability to core-scale solute transport is evaluated using breakthrough data from column experiments conducted with conservative tracers tritium (H-3) and sodium-22, and the retarding solute uranium-232. The three models considered are single-porosity, double-porosity with single-rate mobile-immobile mass-exchange, and the multirate model, which is a deterministic model that admits the…
▽ More
Model applicability to core-scale solute transport is evaluated using breakthrough data from column experiments conducted with conservative tracers tritium (H-3) and sodium-22, and the retarding solute uranium-232. The three models considered are single-porosity, double-porosity with single-rate mobile-immobile mass-exchange, and the multirate model, which is a deterministic model that admits the statistics of a random mobile-immobile mass-exchange rate coefficient. The experiments were conducted on intact Culebra Dolomite core samples. Previously, data were analyzed using single- and double-porosity models although the Culebra Dolomite is known to possess multiple types and scales of porosity, and to exhibit multirate mobile-immobile-domain mass transfer characteristics at field scale. The data are reanalyzed here and null-space Monte Carlo analysis is used to facilitate objective model selection. Prediction (or residual) bias is adopted as a measure of the model structural error. The analysis clearly shows single- and double-porosity models are structurally deficient, yielding late-time residual bias that grows with time. On the other hand, the multirate model yields unbiased predictions consistent with the late-time -5/2 slope diagnostic of multirate mass transfer. The analysis indicates the multirate model is better suited to describing core-scale solute breakthrough in the Culebra Dolomite than the other two models.
△ Less
Submitted 24 April, 2013;
originally announced April 2013.
-
Unconfined Aquifer Flow Theory - from Dupuit to present
Authors:
Phoolendra K. Mishra,
Kristopher L. Kuhlman
Abstract:
Analytic and semi-analytic solution are often used by researchers and practicioners to estimate aquifer parameters from unconfined aquifer pumping tests. The non-linearities associated with unconfined (i.e., water table) aquifer tests makes their analysis more complex than confined tests. Although analytical solutions for unconfined flow began in the mid-1800s with Dupuit, Thiem was possibly the f…
▽ More
Analytic and semi-analytic solution are often used by researchers and practicioners to estimate aquifer parameters from unconfined aquifer pumping tests. The non-linearities associated with unconfined (i.e., water table) aquifer tests makes their analysis more complex than confined tests. Although analytical solutions for unconfined flow began in the mid-1800s with Dupuit, Thiem was possibly the first to use them to estimate aquifer parameters from pumping tests in the early 1900s. In the 1950s, Boulton developed the first transient well test solution specialized to unconfined flow. By the 1970s Neuman had developed solutions considering both primary transient storage mechanisms (confined storage and delayed yield) without non-physical fitting parameters. In the last decade, research into developing unconfined aquifer test solutions has mostly focused on explicitly coupling the aquifer with the linearized vadose zone. Despite the many advanced solution methods available, there still exists a need for realism to accurately simulate real-world aquifer tests.
△ Less
Submitted 15 April, 2013;
originally announced April 2013.
-
Unsaturated Hydraulic Conductivity Models Based on Truncated Lognormal Pore-size Distributions
Authors:
Bwalya Malama,
Kristopher L. Kuhlman
Abstract:
We develop a closed-form three-parameter model for unsaturated hydraulic conductivity associated with the Kosugi three-parameter lognormal moisture retention model. The model derivation uses a slight modification to Mualem's theory, which is nearly exact for non-clay soils. Kosugi's three-parameter lognormal moisture retention model uses physically meaningful parameters, but a corresponding closed…
▽ More
We develop a closed-form three-parameter model for unsaturated hydraulic conductivity associated with the Kosugi three-parameter lognormal moisture retention model. The model derivation uses a slight modification to Mualem's theory, which is nearly exact for non-clay soils. Kosugi's three-parameter lognormal moisture retention model uses physically meaningful parameters, but a corresponding closed-form relative hydraulic conductivity model has never been developed. The model is further extended to a four -parameter model by truncating the underlying pore size distribution at physically permissible minimum and maximum pore radii. The proposed closed-form models are fitted to well-known experimental data, to illustrate their utility. They have the same physical basis as Kosugi's two-parameter model, but are more general.
△ Less
Submitted 4 April, 2014; v1 submitted 4 January, 2013;
originally announced January 2013.
-
Saturated-Unsaturated flow in a Compressible Leaky-unconfined Aquifer
Authors:
Phoolendra K. Mishra,
Velimir V. Vessilinov,
Kristopher L. Kuhlman
Abstract:
An analytical solution is developed for three-dimensional flow towards a partially penetrating large-diameter well in an unconfined aquifer bounded below by an aquitard of finite or semi-infinite extent. The analytical solution is derived using Laplace and Hankel transforms, then inverted numerically. Existing solutions for flow in leaky unconfined aquifers neglect the unsaturated zone following a…
▽ More
An analytical solution is developed for three-dimensional flow towards a partially penetrating large-diameter well in an unconfined aquifer bounded below by an aquitard of finite or semi-infinite extent. The analytical solution is derived using Laplace and Hankel transforms, then inverted numerically. Existing solutions for flow in leaky unconfined aquifers neglect the unsaturated zone following an assumption of instantaneous drainage assumption due to Neuman [1972]. We extend the theory of leakage in unconfined aquifers by (1) including water flow and storage in the unsaturated zone above the water table, and (2) allowing the finite-diameter pumping well to partially penetrate the aquifer. The investigation of model-predicted results shows that leakage from an underlying aquitard leads to significant departure from the unconfined solution without leakage. The investigation of dimensionless time-drawdown relationships shows that the aquitard drawdown also depends on unsaturated zone properties and the pumping-well wellbore storage effects.
△ Less
Submitted 5 March, 2012; v1 submitted 4 November, 2011;
originally announced November 2011.
