-
Cathodes and Shape Modification of Cavity for DESY Superconducting Photoinjector
Authors:
J. Sekutowicz,
D. Bazyl,
E. Vogel,
D. Reschke,
A. Brinkmann,
D. Klinke,
D. Kostin,
T. Ramm,
A. Sulimov,
H. Weise,
M. Wiencek
Abstract:
Four DESY prototypes of the L-band superconducting RF photoinjector cavity demonstrated on-axis peak gradients above 55MV/m during multiple vertical cryogenic tests. Two of these prototypes,16G09 and 16G10, achieved these gradients with both superconducting and normal-conducting metallic cathodes, fabricated from either high-purity niobium or lower-purity copper. The DESY photoinjector, under deve…
▽ More
Four DESY prototypes of the L-band superconducting RF photoinjector cavity demonstrated on-axis peak gradients above 55MV/m during multiple vertical cryogenic tests. Two of these prototypes,16G09 and 16G10, achieved these gradients with both superconducting and normal-conducting metallic cathodes, fabricated from either high-purity niobium or lower-purity copper. The DESY photoinjector, under development for over two decades as a continuous-wave electron source for FELs, differs from other SRF injectors in that its metallic cathode plug is attached directly to the cavity backplate, exposing the emitting surface to the high electric field within the cavity. This design obviates the need for a choke filter or load-lock system. The initial 1.6-cell cavity geometry was derived from the Low-Loss design developed for the CEBAF 12GeV upgrade, scaled from 1.5GHz to 1.3GHz. This shape was later replaced with the current High Gradient TESLA profile. In this report, we discuss current cathode options and present modifications to the cavity shape aimed at significantly reducing the electric field near the cathode opening
△ Less
Submitted 2 July, 2025;
originally announced July 2025.
-
Achievement of 35 MV/m in the Superconducting Nine-Cell Cavities for TESLA
Authors:
L. Lilje,
E. Kako,
D. Kostin,
A. Matheisen,
W. -D. Moeller,
D. Proch,
D. Reschke,
K. Saito,
P. Schmueser,
S. Simrock,
T. Suzuki,
K. Twarowski
Abstract:
The Tera Electronvolt Superconducting Linear Accelerator TESLA is the only linear electron-positron collider project based on superconductor technology for particle acceleration. In the first stage with 500 GeV center-of-mass energy an accelerating field of 23.4 MV/m is needed in the superconducting niobium cavities which are operated at a temperature of 2 K and a quality factor Q0 of 10 to the…
▽ More
The Tera Electronvolt Superconducting Linear Accelerator TESLA is the only linear electron-positron collider project based on superconductor technology for particle acceleration. In the first stage with 500 GeV center-of-mass energy an accelerating field of 23.4 MV/m is needed in the superconducting niobium cavities which are operated at a temperature of 2 K and a quality factor Q0 of 10 to the 10. This performance has been reliably achieved in the cavities of the TESLA Test Facility (TTF) accelerator. The upgrade of TESLA to 800 GeV requires accelerating gradients of 35 MV/m. Using an improved cavity treatment by electrolytic polishing it has been possible to raise the gradient to 35 - 43 MV/m in single cell resonators. Here we report on the successful transfer of the electropolishing technique to multi-cell cavities. Presently four nine-cell cavities have achieved 35 MV/m, and a fifth cavity could be excited to 39 MV/m. In two high-power tests it could be verified that EP-cavities preserve their excellent performance after welding into the helium cryostat and assembly of the high-power coupler. One cavity has been operated for 1100 hours at the TESLA-800 gradient of 35 MV/m and 57 hours at 36 MV/m without loss in performance.
△ Less
Submitted 23 February, 2004; v1 submitted 27 January, 2004;
originally announced January 2004.
-
Rectangular Waveguide HOM Couplers for a TESLA Superstructure
Authors:
A. Blednykh,
D. Kostin,
V. Kaljuzhny,
M. Lalayan,
O. Milovanov,
A. Ponomarenko,
N. Sobenin,
A. Sulimov,
D. Trubin,
A. Zavadzev,
M. Dohlus
Abstract:
Some modifications of a Rectangular Waveguide HOM couplers for TESLA superstructure have been investigated. These RWG HOM couplers are to be installed between the cavities of the superstructure and also at the both ends of it. We investigated a RWG HOM coupler attached to the beam pipe through the slots orientated along beam pipe axis (longitudinal slots), perpendicular to it (azimutal slots) an…
▽ More
Some modifications of a Rectangular Waveguide HOM couplers for TESLA superstructure have been investigated. These RWG HOM couplers are to be installed between the cavities of the superstructure and also at the both ends of it. We investigated a RWG HOM coupler attached to the beam pipe through the slots orientated along beam pipe axis (longitudinal slots), perpendicular to it (azimutal slots) and at some angle to this axis. For dipole modes of both polarizations damping two RWG in every design were used. This paper presents the results obtained for scaled-up setup at 3 GHz at room temperature. The advantages of HOM coupler with longitudinal slots for damping dipole modes and compact HOM coupler with slots at some angle to the axis are shown. Arrangement of HOM coupler in cryostat and heating due to HOM and FM losses are presented. Calculations and design of the feeding RWG coupler for superstructure are also presented.
△ Less
Submitted 1 August, 2000;
originally announced August 2000.
