-
A finite element method to compute the damping rate and frequency of oscillating fluids inside microfluidic nozzles
Authors:
Søren Taverniers,
Svyatoslav Korneev,
Christoforos Somarakis,
Morad Behandish,
Adrian J. Lew
Abstract:
The computation of damping rates of an oscillating fluid with a free surface in which viscosity is small and surface tension high is numerically challenging. A typical application requiring such computation is drop-on-demand (DoD) microfluidic devices that eject liquid metal droplets, where accurate knowledge of damping rates for the least-damped oscillation modes following droplet ejection is par…
▽ More
The computation of damping rates of an oscillating fluid with a free surface in which viscosity is small and surface tension high is numerically challenging. A typical application requiring such computation is drop-on-demand (DoD) microfluidic devices that eject liquid metal droplets, where accurate knowledge of damping rates for the least-damped oscillation modes following droplet ejection is paramount for assessing jetting stability at higher jetting frequencies. Computational fluid dynamics (CFD) simulations often struggle to accurately predict meniscus damping unless a very fine discretization is adopted, so calculations are computationally expensive. The faster alternative we adopt is to compute damping rates directly from the eigenvalues of the linearized problem. The surface tension term in Stokes or sloshing problems requires approximation of meniscus displacements, which introduces additional complexity in their numerical solution. We consider the combined effects of viscosity and surface tension, approximate the meniscus displacements, and construct a finite element method to compute the fluid's oscillation modes. We prove that the method is free of spurious modes with zero or positive damping rates, and we implement it with Taylor-Hood elements for velocity and pressure, and with continuous piecewise quadratic elements for meniscus displacement. We verify the numerical convergence of the method by reproducing the solution to an analytical benchmark problem and two more complex examples with axisymmetric geometry. We obtain the spatial shape and temporal evolution (angular frequency and damping rate) of the set of least-damped oscillation modes in minutes, compared to days for a CFD simulation. The method's ability to quickly generate accurate estimates of fluid oscillation damping rates makes it suitable for integration into design loops for prototyping microfluidic nozzles.
△ Less
Submitted 9 December, 2024; v1 submitted 30 June, 2023;
originally announced July 2023.
-
Physics-Based Nozzle Design Rules for High-Frequency Liquid Metal Jetting
Authors:
Jongmin Seo,
Christoforos Somarakis,
Svyatoslav Korneev,
Morad Behandish,
Adrian J. Lew
Abstract:
We present physics-based nozzle design rules to achieve high-throughput and stable jetting in drop-on-demand liquid metal 3D printing. The design rules are based on scaling laws that capture the change of meniscus oscillation relaxation time with geometric characteristics of the nozzle's inner profile. These characteristics include volume, cross-sectional area, and inner surface area of the nozzle…
▽ More
We present physics-based nozzle design rules to achieve high-throughput and stable jetting in drop-on-demand liquid metal 3D printing. The design rules are based on scaling laws that capture the change of meniscus oscillation relaxation time with geometric characteristics of the nozzle's inner profile. These characteristics include volume, cross-sectional area, and inner surface area of the nozzle. Using boundary layer theory for a simple geometry, we show that the meniscus settles faster when the ratio of inner surface area to volume is increased. High-fidelity multiphase flow simulations verify this scaling. We use these laws to explore several design concepts with parameterized classes of shapes that reduce the meniscus relaxation time while preserving desired droplet specs. Finally, we show that for various nozzle profile concepts, the optimal performance can be achieved by increasing the ratio of the circumferential surface area to the bulk volume to the extent that is allowable by manufacturing constraints.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Accelerating Part-Scale Simulation in Liquid Metal Jet Additive Manufacturing via Operator Learning
Authors:
Søren Taverniers,
Svyatoslav Korneev,
Kyle M. Pietrzyk,
Morad Behandish
Abstract:
Predicting part quality for additive manufacturing (AM) processes requires high-fidelity numerical simulation of partial differential equations (PDEs) governing process multiphysics on a scale of minimum manufacturable features. This makes part-scale predictions computationally demanding, especially when they require many small-scale simulations. We consider drop-on-demand liquid metal jetting (LM…
▽ More
Predicting part quality for additive manufacturing (AM) processes requires high-fidelity numerical simulation of partial differential equations (PDEs) governing process multiphysics on a scale of minimum manufacturable features. This makes part-scale predictions computationally demanding, especially when they require many small-scale simulations. We consider drop-on-demand liquid metal jetting (LMJ) as an illustrative example of such computational complexity. A model describing droplet coalescence for LMJ may include coupled incompressible fluid flow, heat transfer, and phase change equations. Numerically solving these equations becomes prohibitively expensive when simulating the build process for a full part consisting of thousands to millions of droplets. Reduced-order models (ROMs) based on neural networks (NN) or k-nearest neighbor (kNN) algorithms have been built to replace the original physics-based solver and are computationally tractable for part-level simulations. However, their quick inference capabilities often come at the expense of accuracy, robustness, and generalizability. We apply an operator learning (OL) approach to learn a mapping between initial and final states of the droplet coalescence process for enabling rapid and accurate part-scale build simulation. Preliminary results suggest that OL requires order-of-magnitude fewer data points than a kNN approach and is generalizable beyond the training set while achieving similar prediction error.
△ Less
Submitted 2 February, 2022;
originally announced February 2022.
-
Sunflower detonation
Authors:
A. Kasimov,
S. Korneev
Abstract:
In this fluid dynamic video we present simulations of converging two-dimensional detonation in a radially expanding supersonic flow of ideal reactive gas. The detonation is found to be unstable and leads to formation of characteristic cellular patterns. Without any obstacles in the flow, the detonation keeps expanding radially. To retain the wave within a bounded region, we place a number of rigid…
▽ More
In this fluid dynamic video we present simulations of converging two-dimensional detonation in a radially expanding supersonic flow of ideal reactive gas. The detonation is found to be unstable and leads to formation of characteristic cellular patterns. Without any obstacles in the flow, the detonation keeps expanding radially. To retain the wave within a bounded region, we place a number of rigid obstacles in the flow so that the detonation shock stands some distance toward the center from the obstacles. This leads to generation of reflected shock waves from the obstacles which help the detonation wave to remain at a finite distance from the source. The cellular structure of detonation creates beautiful patterns of shock waves and contact discontinuities within and after the reaction zone. The patterns often resemble a sunflower, hence the name of "sunflower detonation".
△ Less
Submitted 16 October, 2012; v1 submitted 15 October, 2012;
originally announced October 2012.
